Answer:
Given,
P1=760 torr
T1=21°C
T2=250°C
P2=?
Solution,
According to Gay-Lussac's Law or Third Gas Law,
P1T2=P2T1
760×250=21×P2
P2=9047 torr
9047 is the pressure of the gas at 250 degree Celsius.
Answer:
9,047.62 torr
Explanation:
The given parameters are pressure (P1) = 760 torr, Temperature at which the gas exerts pressure, P1, called the initial temperature (T1) = 21-celsius degrees, a second temperature(T2) = 250 Celsius degrees, and the pressure(P2) which such gas would exert at T2 is unknown [P2=?]. Notice that the temperature difference.
Gay Lussac's Law states that the pressure of a given amount of gas held at constant volume is directly proportional to the kelvin temperature.
If you heat a gas, the molecule gains kinetic energy and they move about in their container. As the temperature increase, the energy each particle gains would increase as well. Thus, allowing them to move faster and in all directions. Because they are confined to the boundary of the container, the gas particles bounce off the wall of the container. The energy allows continuous movement of the particle. Hence, the pressure each particle would exert on the wall of the container is equal to its momentum. Remember that the velocity, V, a particle is traveling with is promotional to the energy, E, that it obtains from the increase in temperature.
Using the Gay Lussac's Law equation: P1T2=P2T1 [Notice here that P=T].
Making P2 the mathematical subject, P2= P1T2/T1. ----Formula for the condition of this problem.
Substituting the known values;
P2= (760 torr x 250°C)/ 21 °C
P2= (190,000 °C torr)/21 °C
Cancel like terms in the numerator and denominator.
P2= (190,000 torr)/21
P2= 9,047.62 torr
[Notice that the pressure increase with the increase in temperature. The pressure increase from 760 torr to 9,047.62 torr with an increase in temperature from 21 Celsius degrees to 250 Celsius degrees.]
Speed is the rate of change of position expressed as _____ traveled per unit of time. A. direction B. meter C. displacement D. distance... Help!!!
Answer:
Distance
Explanation:
identify the state of matter in the box,
Answer:
gas
Explanation:
particles are very far apart
The given diagram represents gaseous state of matter. Both a volume and a definite form are absent from a gas. The separation of gas particles is great.
What is state of matter?Solids, liquids, gases, plus plasma are the four states of matter that may be found in daily life. However, a number of additional states of matter have indeed been found.
Some of these additional states are created when a material transitions among two states of matter and doesn't actually exhibit the characteristics of either state. The most exotic are others. Both a volume and a definite form are absent from a gas. The separation of gas particles is great. The gas in a balloon and the air are two examples of gases. The given diagram represents gaseous state of matter.
Therefore, the given diagram represents gaseous state of matter.
To learn more about state of matter, here:
https://brainly.com/question/9402776
#SPJ6
-what color is the tube
-is the reaction reversible
-has the reaction reached equilibrium
Answer:
-what color is the tube: Transparent
-is the reaction reversible: what reaction
-has the reaction reached equilibrium: I don't see a reaction
BTW you didn't provide all the information.
What is the difference between an imprint and an impression?
Answer:
As nouns the difference between impression and imprint
is that impression is the indentation or depression made by the pressure of one object on or into another while imprint is an impression; the mark left behind by printing something.
The term imprint is defined as to mark by or as if by pressure and the term impression is defined as the effect produced by impressing.
What is the difference between an imprint and an impression?The difference between an imprint and an impression is that the imprint is the mark left behind when anything is printed, whereas the impression is the indentation or depression caused by the pressure of one object against or into another.
While a shoe won't make an impression in loose sand, it will on a hard surface like concrete or linoleum. These imprints or impressions might be contrasted with the shoe of a suspect or the tire of a car to see if they belong to the same object.
Thus, The term imprint is defined as to mark by or as if by pressure and the term impression is defined as the effect produced by impressing.
To learn more about the imprint and the impression, follow the link;
https://brainly.com/question/20410964
#SPJ2
What are some facts about Radon?????
Answer:
Explanation:
Radon is radioactive.
Radon is a naturally occurring radioactive gas.
Radon causes cancer.
Breathing radon can increase your risk of developing lung cancer.
No immediate symptoms.
You must test for radon.
Radon is present indoors and outdoors.
Radon can build up in any building.
Answer: No but I have a three elmos dolls in my basement
Explanation:
Write the balanced nuclear equation.
263
1.
Sg
254 Rf + A He
106
104
4
2.
211
At
83
He
2
3.
248
96
Cm + He
4
-
235
U
92
+
He
4.
2
Answer:
pag pinag balik tad moyan tama magiging tama sagot nya promise jslsh
Which statement is true for nuclear reactions but not for chemical reactions?
#
Choice
A.
They convert some energy into mass.
B.
They convert some mass into energy.
C.
They break bonds between atoms.
D.
They form bonds between atoms.
Explain the term respiration and how this process increases the percentage of carbon dioxide in the atmosphere.
Answer:
Please find the explanation to this question below.
Explanation:
A birthday balloon is filled with 6.4 L of Helium. The pressure changes to 0.87 atm and the balloon expands to occupy a volume of 20.5 L. What was the initial pressure exerted on the balloon in psi?
PLS HELP WITH WORK!!
Answer:
3.97 psiExplanation:
The new pressure can be found by using the formula for Boyle's law which is
[tex]P_1V_1 = P_2V_2[/tex]
Since we're finding the new pressure
[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]
We have
[tex]P_2 = \frac{6.4 \times 0.87}{20.5} = \frac{5.568}{20.5} \\ = 0.2716.... \\ \\ = 0.27 \: \: \: atm[/tex]
But
1 atm = 14.7 psi
Then 0.27 atm =
[tex] \frac{14.7 \times 0.27}{1} = 3.969 \\ [/tex]
We have the final answer as
3.97 psiHope this helps you
Answer:
3.97 psi
Explanation:
At what temperature does a gas at 1.00 atm and 20 degree Celsius have a pressure of 4.00 atm.
Please help thanks.
Answer:
P1 =4 atm
T1= 20°C
P2=1 atm
T2=?
According to Gay-Lussac's Law or Third Gas Law,
P1T2=P2T1
4×T2=1×20
T2= 20/4
T2= 5°C
Answer At 5°C temperature does a gas at 1.00 atm !
When solid water changes directly to water vapor without first becoming a liquid, the process is called?
Sublimation. Sublimation is the change of a solid direct to gas or vapour without becoming liquid
What is the ph of H2?
Answer:
Hydrogen ion concentration is more conveniently expressed as pH, which is the logarithm of the reciprocal of the hydrogen ion concentration in gram moles per liter. Thus, in a neutral solution the hydrogen ion (H+) and the hydroxyl ion (OH−) concentrations are equal, and each is equal to 10−7. A pH of 7 is neutral
how has the study of fossil rocks evolved over time? (personal answer)
Answer:
When an organism dies, it is usually destroyed by other forms of life and by weathering processes. On rare occasions some body parts—particularly hard ones such as shells, teeth, or bones—are preserved by being buried in mud or protected in some other way from predators and weather. Eventually, they may become petrified and preserved indefinitely with the rocks in which they are embedded. Methods such as radiometric dating—measuring the amounts of natural radioactive atoms that remain in certain minerals to determine the elapsed time since they were constituted—make it possible to estimate the time period when the rocks, and the fossils associated with them.
The initial amount of low-quality energy available from an energy resource is called its net energy.
Answer:
La cantidad de energía disponible de una fuente de energía determinada se denomina recurso energético. La escasez de recursos energéticos (petróleo, carbón y madera) en algunas de las fuentes de energía más utilizadas plantear necesidad de usar otras fuentes investigar el modo más rentable de emplearlas
Explanation:
Answer:
false
Explanation:
its the amount of high-quality energy available from a given quantity of an energy resource minus the high-quality energy needed to make the energy available.
Isaiah rolls a tennis ball along the ground. Which of the following best explains what will happen if forces act on the ball?
Answer:
what are the following
Explanation:
what are the options?
Answer:
the ball will stop moving
A sample of sulfur dioxide occupies a volume of 6052 mL at 352 K and 892 mm Hg. What volume will the sulfur dioxide occupy at STP?
Answer:
5511.99 mL
Explanation:
Given data
Volume V1= 6052 mL
Temperature T1= 352K
Pressure P1= 892 mm Hg
At STP the parameters of gas are
Temperature T2= 273.15 K
Pressure P2= 760 mmHg
Applying the gas equation
P1V1/T1= P2V2/T2
Substitute to find V2 we have
892*6052/352= 760*V2/273.15
5398384/352= 760*V2/273.15
15336.31= 760*V2/273.15
Cross multiply
15336.31*273.15= 760*V2
4189113.0765= 760*V2
4189113.0765/760= V2
V2= 5511.99 mL
Hence the volume at STP is 5511.99 mL
Review the chart of all the domesticated rabbits. The different types of rabbits are listed by their scientific names. If you were a
rabbit breeder, which rabbits could you breed to produce fertile offspring? Explain.
A)
All of the rabbits listed. They are all rabbits.
B)
None of these rabbits. They are all different species.
C)
Any of the cottontail rabbits They are the same species.
D)
Any of the rabbits on the same branch in the chart because that means
they are closely related.
Answer: None of these rabbits listed. they are all different species
Explanation:
I got it right on usatestprep
Calculate the Density of the substances below to determine if they will float or sink in water.
Mass
Volume
Density
Float or Sink
45. Substance 1
90 ml
46. Substance 2
450 grams
35 grams
24 grams
70 ml
47. Substance 3
12 ml
Explanation:
If the density of the object is more than that of water, it will sink. Otherwise it will float. The density of water is 1 g/mL.
Substance 1,
Mass, m = 450 g, Volume, V = 90 mL
Density = mass/volume
So,
[tex]d_1=\dfrac{450}{90}\\\\=5\ g/mL[/tex]
It will sink.
Substance 2,
Mass, m = 35 g, Volume, V = 70 mL
Density = mass/volume
So,
[tex]d_2=\dfrac{35}{70}\\\\=0.5\ g/mL[/tex]
It will float.
Substance 3,
Mass, m = 24 g, Volume, V = 12 mL
Density = mass/volume
So,
[tex]d_3=\dfrac{24}{12}\\\\=2\ g/mL[/tex]
It will sink.
What the common uses for Bohrium?
Answer:
Explanation:
Bohrium's most stable isotope, bohrium-270, has a half-life of about 1 minute. It decays into dubnium-266 through alpha decay. Since only a few atoms of bohrium have ever been made, there are currently no uses for bohrium outside of basic scientific research.
Answer:
look it up?
Explanation:
How can you know if something has energy?
(Can you explain it in a sentence?)
Consider the diagram above. If you placed a rubber duck on the
surface of the water in the middle of the pot, in which direction
would you expect the duck to move?
Answer:
But there is nothing above
When first mixed, concrete can be described as (Blank)
, which means it can take the shape
of the formwork provided.
Que representa en la reacción química
Na2SO4(s)+H2O(1)=
Answer: The given reaction is a double displacement reaction.
Explanation:
A chemical reaction equation in which both positive and negative ions of two different reactants are exchanged then it is called a double displacement reaction.
For example, [tex]Na_{2}SO_{4} + H_{2}O \rightarrow H_{2}SO_{4} + Na_{2}O[/tex]
Here, hydrogen ions of [tex]H_{2}O[/tex] are replaced by the sodium ions of [tex]Na_{2}SO_{4}[/tex]. Also, sulfate ion of [tex]Na_{2}SO_{4}[/tex] are replaced by oxygen ion of [tex]H_{2}O[/tex].
Thus, we can conclude that the given reaction is a double displacement reaction.
which of the following elements has the highest electronegativity?
A) oxygen
B) nitrogen
C) carbon
D) boron
Answer:
option d) is the correct answer
Geothermal energy is produced from a combination of high pressure and the breakdown of______ underground.
Fill in the blank
How many grams of sucrose will I add to the water (0.100 L) in order to make the 3 molal solution.
Answer:
mass = 102.69 g of sucrose
Explanation:
First, you need to use the correct expression of molality (m) which is the following:
m = moles / kg solvent (1)
According to the exercise, we need to get the grams, in other words, the mass of the sucrose. To get the mass, we need the moles and molecular weight of sucrose and use the following expression:
moles = mass / MM (2)
Now, if we replace (2) in (1) we have:
m = mass / MM * kg solvent (3)
From here, we solve for the mass and then:
mass = m * MM * kg solvent (4)
Now, then density of water is 1 kg/L, so, the volume of the water will be the same as it's mass, and the molality is 3 m. The molecular weight of the sucrose is (according to several sources) 342.3 g/mol. Replacing all the data in (4) we have:
mass = 3 mol/kg * 0.1 kg * 342.3 g/mol
mass = 102.69 g of sucroseHope this helps
A _____ is an area prone to flooding.
A. basin
B. fault line
C. floodplain
D. desert
Answer:
c. floodplain
Explanation:
brainliest please!
Answer:
I think the answer is floodplain.
Explanation:
I hope this helps, have a blessed day.
Do yall beliven stop animal testing?
now that i do and I also believe adopt don't shop and also no puppy mill.
which do you think will warm up the plate more quickly?
A. Direct sunlight
B.Indirect sunlight
Answer: B
your welcome Bsbssnsnsmsllqql
an example of no chemical reaction occurring
in gizmos
Answer:
Hydrogen + Helium
Explanation:
No reaction occurs