Answer::
It is a work interaction as the compression process moves the piston by an external force.
Explanation:
2. Describe one example of something that might be a need for you but a want for
someone else.
Answer:
1: water food or shelter
What is the difference between residential, commercial, and industrial air conditioning applications?.
The differences between commercial and residential applications include;
(1) Size difference
(2) Location
(3) Complexity
(4) Drainage
(5) Mechanism
(6) Equipment
(7) Cost
(8) Maintenance skill
How are residential and commercial air-conditioning different?The difference between residential and commercial air-conditioning are;
1. Size difference
The difference in size of the area being cooled or heated, leads to the following;
Difference in components such as condensers, thermostat, fans Difference in power needDifference in unit size2. Location of the air-conditioning system;
Residential air-conditioning units are located beside the house or building
Commercial systems are located in the roof or in swamp coolers.
Advantage of locating the commercial air-conditioners in the roof includes
Saving of space at the location
Reduction of noise pollution
Non disruptive maintenance
3. Complexity;
Commercial air-conditioning systems are more complex than residential due to the requirement for the consideration of the following;
Number of people
Size or space being serviced
Type of use (Constant or periodic)
4. Drainage required;
Larger and complex drainage system
5. System mechanism;
Modular system design The larger sizes of the commercial air-conditioning leeds to difference in installation method ( modular or direct)The location of parts within the same location in modules6. Equipment used;
The difference in the range of humidity and temperature in the residential and commercial applications creates different equipment requirements
7. Cost
Commercial air-conditioning is more costly to purchase, install and maintain than residential air-conditioners.
8. Maintenance skill required
The skill requirement difference between residential and commercial applications lead to the demand of skilled practitioners in the industry.
Learn more about HVAC systems here:
https://brainly.com/question/14852309
#SPJ1
What is magnitude of line current Ia?
Explanation:
Note that in a balanced wye connected load, the line-to-neutral voltage (L-N) is equal to line-to-line (L-L) voltage divided by √3. Also, the per line-to-neutral is lagging with respect to line-to-fine voltage by 30°.
From the above choices, the nearest answer to the magnitude of the current is option (A) 101 A
Deduce the general exponential fourier series as derived in biomedical analog signals and systems
Answer:
Exponential Series
Explanation:
Answer:
[tex]{ \rm{x(t) = a_{0} + \sum a_{k} \cos \omega t + \sum b _{k} \sin \omega t }}[/tex]
[tex]{ \tt{ a_{0} = \frac{2}{t} \int x(t) \: dx}} \\ \\ { \tt{ a_{k} = \frac{1}{t} \int x(t) \cos \omega t \: dx }} \\ \\ { \tt{ b_{k} = \frac{1}{t} \int x(t) \sin \omega t \: dx }}[/tex]
Fuses and ____________________ are designed to protect the circuit from a direct ground or short-circuit condition.
Answer: i don't undermant
Explanation:
Name two common fuel gases that can be used for oxyfuel cutting
Before attempting to put out a
small fire near flammable
materials you should
A| Remove the flammable materials to a safe place
B| Run to the nearest phone to call for help
C| Sound the alarm
D| Put on protective clothing
What do you understand if someone says assembling of EC components
Answer:
Assembling is the arranging of electronic components to be soldered onto the circuit board
Which of the following helps support the implementation of software applications within a programming platform?
A. development tool
B. Visual Basic
C. parse
D. syntax
Answer:
A: development tool
Explanation:
Development tool helps support the implementation of software applications within a programming platform. Thus, the correct option for this question is A.
What do you mean by Software application?A Software application may be defined as a kind of computer program that significantly performs or operates a specific personal, educational, and business function with respect to the requirement of an individual.
In this modern era of technology, programming platforms develop new trends and ideas that are efficient and beneficial to consumers. These programming platforms implement software applications with the help and support of developmental tools.
Therefore, the option that helps support the implementation of software applications within a programming platform is known as the development tool. Thus, the correct option for this question is A.
To learn more about Programming platforms, refer to the link:
https://brainly.com/question/28465460
#SPJ2
4.). What is the magnitude of current Ia, Ib, Ic?
A.)18
B.) 31.18
C.)10.4
D.)6
5.) In problem #4, what is the total 3ø real power Supplied to the load?
(A) 1000 W
(B) 1960.5 W
(C) 5882 W
(D) 4856w
Explanation:
Note that in a balanced 36 connected load, the magnitude of the line current is equal to phase current multiplied by √3.
The total 36 real power supplied to the load can be calculated by getting the total 34 power consumed by the balanced delta connected load.
#4 A.)18
#5 (C) 5882 W
Which type of fuel metering system is used by roosa master distributor injection pumps?
Answer: d
Explanation:
The Quantity (13+j17)/(15-j10) in Phasor form equals:
Explanation:
To express the complex number into the standard form,
a + bi , we need to multiply both numerator and denominator by the complex conjugate of 15-j10.
technical terms on cars
Answer:
ABS: Antilock Braking System – Prevents the wheels from locking during emergency braking.
ACC: Adaptive Cruise Control – Monitors traffic ahead and reduces or increases the car's speed based on the flow of traffic.
AEB: ...
AWD: ...
BHP: ...
CVT: ...
DDI: ...
DFI:
Explanation:
hope it helpssss
Answer:
ABS: Antilock Braking System – Prevents the wheels from locking during emergency braking.
ACC: Adaptive Cruise Control – Monitors traffic ahead and reduces or increases the car's speed based on the flow of traffic.
AEB: ...
AWD: ...
BHP: ...
CVT: ...
DDI: ...
DFI:
I'm having trouble with picking the correct equations for this. Some ways equal 12.4 N-m, but that's wrong. 24.8 N-m is also wrong. I have 62sin60 and 62cos60, and the perpendicular should be 200mm.
The couple of the moment of the two forces is 3.82 N.m
What is the Moment of the Couple?
We are given;
Force applied at A; F_a = 62 N
Force applied at C; F_c = 62 N
AB = BC = 200 mm = 0.2 m
Horizontal component of F_a is; F_ax = 62 cos 50
Vertical component of F_a is; F_ay = 62 sin 50
Horizontal component of F_c is; F_cx = 62 cos 50
Vertical component of F_c is; F_cy = 62 sin 50
Taking moments about point C gives;
M_c = F_ay * AB - F_ax * BC
M_c = (62 sin 50 * 0.2) - (62 cos 50 * 0.2)
M_c = 23.75 - 19.93
M_c = 3.82 N.m
Thus, the couple of the moment of the two forces is 3.82 N.m
Read more about Moment of Couple at; https://brainly.com/question/24551104
#SPJ1
Which EC board doesnot require sokdering when assembling it
Answer:
The type of solder used for electronics usually contains 60% tin and 40% lead. This is often known as "60/40" solder. It is what is termed a "Eutectic Mixture". Although this is a chemical term, basically this type of mixture melts at a temperature well below that which might normally be expected.
Explanation:
Answer:
A bread board
Explanation:
A bread board has only small holes into which jumper wires are inserted
The quality control engineer at a petrochemical refinery is in a _____ position.
The quality control engineer at a petrochemical refinery is in a matrix position.
Who is an engineer?An engineer can be defined as a person who solves technical problems which are related to a product or a good. These are also engaged in developing new products full of the improvement of the efficiency and quality of the product.
A matrix's profile is determined by the object's row and column numbers, in that order.
Petrochemicals are indeed the chemical byproducts of the processing of gasoline. Some petroleum-derived chemical compounds can also be produced from these other oil and coal.
Learn more about engineer, here:
https://brainly.com/question/27222435
#SPJ1
If a bearing needs 4. 0 s to solidify enough for impact, how high must the tower be?.
In order to determine the height of the tower, we would apply the second equation of motion and assume that the downward motion is negative.
Mathematically, the second equation of motion is given by this formula:
S = ut + ½gt²
Where:
S represents the distance or height.u represents the initial velocity.a represents the acceleration.t represents the time.Substituting the given parameters into the formula, we have;
S = S₀ + ut - ½gt²
0 = S₀ + (0)4.0 - ½ × (9.8) × 4.0²
0 = S₀ - 4.9 × 16.0
Height, S₀ = 78.4 meters.
How to calculate the bearing's impact velocity?In order to calculate the bearing's impact velocity, we would apply the first equation of motion:
V = u - at
V = 0 - 9.8(4.0)
Impact velocity, V = 39.2 m/s.
Read more on velocity here: https://brainly.com/question/19365526
#SPJ1
Complete Question:
Ball bearings can be made by letting spherical drops of molten metal fall inside a tall tower, called a shot tower, and solidify as they fall.
a. If a bearing needs 4.0 s to solidify enough for impact, how high must the tower be?
b. What is the bearing's impact velocity?
2. Who is responsible for the safe operation of the aerial lift and anyone on the platform?
a) The supervisor.
b) The operator.
The owner.
d) The service technician.
Answer:
D. the service technician
Explanation:
hope it's help
Answer:
c) the owner
Explanation:
this is because when there is no owner there is no manager
Technician a says that containers for dirty shop rags should be made of metal. technician b says that these containers should have a lid that stays closed. which technician is correct?
The opinion of both the technicians is correct that containers for dirty shop rags should be made of metal and those containers should have a lid that stays closed. So both the technicians are correct.
What exactly does a technician do?Professionals with technical expertise are hired in practically every business. They are asked to service, install, replace, and repair numerous systems and pieces of equipment. They are adept at the requisite knowledge, abilities, and methods required by their line of work, which includes the automotive, maintenance, HVAC, and pharmaceutical industries.
Technicians examine, decipher, and debug client equipment and systems. They conduct tests and analyze the data to formulate sound suggestions for mending defective or damaged equipment. They will negotiate prices with suppliers and clients to obtain replacement parts as necessary during repairs.
Hence, both the technicians are correct because a metal container having a lid on it will isolate the dirty shop rags. After putting all the rags inside the metal container, put on the lid to it to isolate it from the surroundings.
To get more information about Technician :
https://brainly.com/question/14290207
#SPJ1
Com base no memorial descritivo abaixo, resolva os seguintes itens:
a) Calcule a área total em metros quadrados do terreno;
b) Calcule as coordenadas dos vértices do terreno A-B-C-D;
c) Calcule o Azimute e Distância entre os vértices do terreno A-B-C-D-A.
Memorial Descritivo do Terreno
Um lote urbano situado no município de Camanducaia-MG, localizado no Bairro Centro, na Rua dos Topógrafos, nº 100. Proprietário Haruo Shiroma, Mestre de Obras, divorciado, residente e domiciliado nesta Cidade. O terreno inicia-se no Vértice A de coordenada X=2.224,533 e coordenada Y=585,849; deste segue para o Vértice B com Azimute 330°00’00” e distância de 15,00 metros, confrontando do Vértice A ao Vértice B com a Rua dos Topógrafos; daí deflete a direita e segue para o Vértice C com ângulo interno de 135°00’00” e distância de 25,00 metros, confrontando do Vértice B ao Vértice C com o Imóvel de nº 90; daí segue para o Vértice D de coordenada X=2.230,344 e coordenada Y=604,194, confrontando do Vértice C ao Vértice D com o Imóvel de nº 505; daí segue para o Vértice A, início da descrição, com Azimute de CALCULAR AZIMUTE e distância de CALCULAR DISTÂNCIA metros, confrontando do Vértice A ao Vértice D com o Imóvel nº 110; encerrando uma área total de CALCULAR A ÁREA TOTAL
Answer:
idek
Explanation
himomy
An 802.11 frame contains a number of fields. which field describes the version of 802.11 that is being used?
An 802.11 frame contains a number of fields. frame control field describes the version of 802.11 that is being used.
What is frame control?Information is conveyed as a byte torrent across a moment in time interconnect called a frame among two or more devices. Upon reaching a significant frame, a package is split into a shorter person.
There are several specializations inside the framing modulation process that are used to characterize the frames and execution. These comprise the 802.11 version that is used by the person and is being processed in the input.
Learn more about frame control, here:
https://brainly.com/question/14513120
#SPJ1
tech a says that riveted lining is usually for heavy-duty or high-performance vehicles. tech b says that bonded lining is glued to the metal brake shoe. who is correct?
Based on the information provided, the technician who is correct is: C. Both Technician A and Technician B.
How to diagnose a brake system?In order for a technician to diagnose a brake system, the following symptoms should be adequately and appropriately checked and used by the technician:
NoisesSmellsAbnormal brake pedal movements.Improper braking action.Riveted lining.Based on the information provided, we can reasonably infer and logically deduce that both Technician A and Technician B are correct because bonded lining can be glued to a metal brake shoe while riveted lining is typically used for high-performance or heavy-duty automobile vehicles
Read more on bonded lining here: https://brainly.com/question/7625439
#SPJ1
Complete Question:
Technician A says that riveted lining is usually for heavy-duty or high-performance vehicles. Technician B says that bonded lining is glued to the metal brake shoe. Who is correct? a. Technician A b. Technician B c. Both A and B d. Neither A nor B
Technician a says that only manufacturers offer vehicle warranties. technician b says that aftermarket warranties are available for consumers to purchase. which technician is correct?
Based on the information provided, the technician who is correct is Technician B only.
What is an extended warranty contract?An extended warranty contract is sometimes referred to as an aftermarket warranty and it can be defined as an elongation of the coverage period on a service agreement that was entered between a manufacturer and the customer (consumers).
Generally, some of the characteristics and features of an extended warranty contract include the following:
An extended warranty contract provides protection beyond the manufacturer's original warranty.An extended warranty contract constitutes a separate performance obligation.An extended warranty contract is available for consumers to purchase.Based on the information provided, we can reasonably infer and logically deduce that the technician who is correct is Technician B only.
Read more on extended warranty contract here: https://brainly.com/question/27241092
#SPJ1
Problem 3. Consider the Cartesian (x, y, z) and spherical (r, 0, 0) coordinate systems shown below. We can see
that:
The unit vectors are related by:
er
eg
eo
Or, they can be inverted to obtain:
=
=
=
T
x
=
= r sin cos
Y
r sin
z = r cose
x, ex
ex =
sin cos de, + cos
ey
sin sin pe, + cos
ez = cose, sin eg
Show that the gradient of a scalar, a, is give by:
да
Ər
√x² + y² + 2²
sin
cos pe
+ sin
cos cos pe
+ cos
- sin de + cos de
Va er
+
1 да
r 20
z, e₂
Ф
sin o
Ө
eo +
sin pey + cos lez
sin pey - sinfez
cos peg - sin de
sin pee + cos de
1
r sin
r, e,
ed
да
do
-eo
y, eyn
Answer:
Can't help
Explanation:
A warning placed in an installation manual for a piece of equipment indicates that the equipment must not be placed within 36 inches of flammable material. You need to know the value in centimeters (cm), and you know that one inch equals 2.54 cm. What is the allowable distance to flammable material in centimeters, to the nearest hundredth of a centimeter?
The allowable distance to flammable material in centimeters is equal to 91.44 cm.
What is a conversion factor?A conversion factor can be defined as a number that is typically used to convert (change) a number in one (1) set of units to another, either by dividing or multiplying.
Generally speaking, an appropriate conversion factor to an equal value must be used when it is necessary to perform any mathematical conversion.
In order to calculate the allowable distance to flammable material in centimeters, we use the following conversion factor.
Conversion:
1 inch = 2.54 cm.
36 inches = X cm.
Cross-multiplying, we have:
X = 2.54 × 36
X = 91.44 cm.
Read more on conversion factor here: brainly.com/question/28308386
#SPJ1
A motorcycle patrolman starts from rest at A two seconds after a car, speeding at the constant rate of 120 km/h, passes point A. If the patrolman acceler- ates at the rate of 6 m/s² until he reaches his maxi- mum permissible speed of 150 km/h, which he maintains, calculate the distance s from point A to the point at which he overtakes the car.
The distance, s from point A to the point at which he overtakes the car is 912 meters.
What is the formula for calculating the distance?Distance may be defined as the total movement of an object without any regard for direction. It is a type of scalar quantity. The formula for calculating the distance is as follows:
Distance = speed/time taken.According to the context of this question,
The speed of motorcycle patrolman = 120 km/h = 120 × 5/18 = 33.33 m/sec.
The maximum permissible speed = 150 km/h = 150 ×5/18 = 41.66 m/sec.
So, at the speed of 6 m/s², it takes 6.94 seconds.
The distance traveled in 6.94 sec = 1/2 (6)[tex](6.94)^2[/tex] = 144.67 m.
So, the cop overtakes the car when at,
33.333t = 144.67 + 41.666(t-2-6.9444)
t = 27.362 seconds.
Now, the distance, s from point A to the point at which he overtakes the car = car(27.362) = 33.333*27.362 = 912m.
Therefore, the distance, s from point A to the point at which he overtakes the car is 912 meters.
To learn more about Distance, refer to the link:
https://brainly.com/question/114551
#SPJ1
Once the external shape and internal features of a part are represented by a combination of lines, further information is provided by ____.
Once the external shape and internal features of a part are represented by a combination of lines, further information is provided by Dimension.
What is Shape Dimension?In regards to geometry, the three-dimensional shape is known to be one that can be said to be a form of solid figure or an object/shape that is of known to be made up of three dimensions which are length, width, and height.
Note that the three-dimensional shapes have height as well as thickness or depth.
Therefore, Once the external shape and internal features of a part are represented by a combination of lines, further information is provided by Dimension.
Learn more about Shape from
https://brainly.com/question/3701983
#SPJ1
A Voltage source is given by
[tex]V(t) = 100 \sqrt{2} cos1000t[/tex]
volts. What is the rms value of the voltage?
Explanation:
A voltage source is given by, V(t) = 100√2cos(1000t)
here:
Vo= 100√2 V is the maximum value of the voltage.
The RMS value given by,
Early engines were called flat head designs because they ________. used valves beside the cylinder used spark plugs at the top of the cylinders were only inline engines did not include valves.
Early engines were called flathead designs because they used spark plugs at the top of the cylinders.
What are engines?
Engines can be defined as motor or a machine that is used in the internal part of the combustion. These are used in various vehicles like ships, airplanes, bikes, etc
At the top of the cylinder close it so that the leakage won't be there, and the design could send the spark to the engine through which the Indian can get started.
These engines are the main reason because of which the vehicle moves and processes various features like sound or light.
Learn more about engines, here:
https://brainly.com/question/1232655
#SPJ1
a technician is being asked to move a heavy industrial printer. which safety technique is recommended for this situation?
The safety technique that is recommended for this situation of moving a heavy industrial printer is to Bend at the knees when lifting.
What is a Safety Procedure?This refers to the process of executing a task in a safe and acceptable way that does not put the user or others at risk
Hence, we can see that The safety technique that is recommended for this situation of moving a heavy industrial printer is to Bend at the knees when lifting.
This is to ensure that the person doing the lifting does not injure himself and has the proper form when lifting.
Read more about safety procedures here:
https://brainly.com/question/14367881
#SPJ1