a given molecule has six electrons in bonding orbitals and two anti-bonding orbitals. what is the bond order for the molecule?

The volume of distilled water they must add to the initial solution to achieve this lower concentration is 35.5 l.

Dilution is defined as the process in which the concentration of a sample is decreased by adding more solvent. The dilution formula is given below.

C₁V₁ = C₂V₂

where C₁ = initial concentration of sample = 18.0 m

V₁ = initial volume of sample = 5.00 x 10² ml

C₂ = final concentration after dilution = 0.25 m

V₂ = total final volume after dilution

Plug in the values to the formula and solve for the final volume.

C₁V₁ = C₂V₂

(18.0 m)(5.00 x 10² ml) = (0.25 m)V₂

V₂ = 36000 ml

Subtract the initial volume from the final volume to determine the volume of water needed to add.

V of water = V₂ - V₁

V of water = 36000 ml - 5.00 x 10² ml

V of water = 35500ml = 35.5 l

Learn more about dilution here: brainly.com/question/1615979

#SPJ4

The total mass of the crucible and contents is 1.76g.It becomes 1.77g after the second heating. Here the decomposition reaction occurs.

Crucible is a metal container in which the substances are subjected to very high temperature.Decomposition reaction is the reaction in which a molecule breaks down to form two or more components. All decomposition reactions are the reverse of a combination of reactions.one of the product of decomposition must be in the elemental state.All decomposition reactions are not redox reactions. By heating a crucible and a content using intense gas flame,the mass of the content of the crucible will increase to some extent.so,the mass is increased from 1.76g to 1.77g.

To learn more about decomposition reaction please visit:

https://brainly.com/question/27300160

#SPJ4

Metals will tend to form ions that are larger than their parent atom.

Do metals become smaller or larger when they become ions?

To learn more about Metal ions, follow the link https://brainly.com/question/28642645

#SPJ4

Add distilled water towards the funnel to quickly identify which layer is aqueous layer .

By adding distilled water in aqueous solution, the organic layer will be the one that decreases in size, while the aqueous layer must expand. The two layers could then be divided into their corresponding beakers.

Water inside the liquid state serves as the solvent in such an aqueous solution. In other words, water molecules surround and integrate solute (dissolved) ions as well as molecules into their web of bonds.

If it is challenging to determine in which the droplets travel, also keep note of the layers' volumes: the watery layer indicates whichever layer expands as more water is added.

To know more about aqueous layer

https://brainly.com/question/24108403

#SPJ4

Answer:

The least reactive metals would be Platinum, Gold, Palladium, Osmium and Silver and in the decreasing order.

Of the following elements: Fluorine, Rubidium, Cesium, and Gold  is the LEAST reactive:

Gold

The original pH of the gastric juice sample is 3.43

pH serves as a measure to calculate the acidity/alkalinity of a solution. It's ranges is between 0 - 14, with 7 being neutral. A pH below 7 indicates acidity and a pH above 7 indicates basicity. pH is actually a measure of the relative amounts of free hydrogen and hydroxyl ions in water.

As we know:

M₁V₁ = M₂V₂

For the given question:

M₁ = Concentration of gastric juice

V₁ = Volume of gastric juice (20 ml)

M₂ =  Concentration of NaOH (0.0011 M)

V₂ = Volume of NaOH (6.7 ml)

So, M₁ = M₂V₂ / V₁

M₁ = 0.0011 × 6.7/20

M₁ = 0.000365

For pH:

pH = -log [H⁺]

pH = -log [0.000365]

pH = 3.43

To know more about pH visit:

https://brainly.com/question/2288405

#SPJ4

564.930995917 ml of potassium hydroxide would have to be added .

What is pH ?

The pH of a food is a direct function of the free hydrogen ions present in that food. Acids in food release free hydrogen ions. Hydrogen ions give acidic foods their characteristic sour taste. Therefore, pH can be defined as a measure of free acid. More specifically, pH is defined as the negative logarithm of hydrogen ion concentration. The pH range is 0 to 14. The pH of pure water is exactly 7, so pH 7 is neutral. Values ​​less than 7 are acidic. Values ​​above 7 are basic or basic.

Foods are generally classified as “acidic foods” (low pH, pH 4.6 or less) or “weakly acidic foods” (high pH, ​​pH 4.6 or higher). Safe food storage is determined by the pH of the food. Acidic foods such as fruit and pickles can be safely canned in a tin can with a hot water bath. A combination of acid and hot water (212°F) destroys perishable organisms such as mold and yeast. Proper cooking water canning processes are important to prevent the growth of acid-tolerant molds and yeasts that can lead to elevated pH levels. The pH of borderline foods such as figs and tomatoes can easily exceed 4.6, so lemon juice or citric acid should be added before canning with boiling water. Low-acid foods such as vegetables and meat should be processed in a pressure preserver for safety.

To know about the pH , click the link given ;

brainly.com/question/26424076

#SPJ4

The elements that has the quantum numbers shown are;

The quantum number is used to be able to identify the electron in an atom. We know that the orbital is a region in space where electrons could be fond and electrons are identified in the orbitals where they are found by the use of quantum numbers.

Now we have to use the quantum numbers as shown to be able to identify the elements that have them. This is so because the kind of element can be known from the quantum numbers that its electrons posses.

Learn more about quantum numbers:https://brainly.com/question/16977590

#SPJ1

The solubility product of the copper(II) iodate is 1.25 * 10^-7

The term solubility has to do with the amount of a substance that is dissolved in water. The solubility product is the equilibrium constant that shows the extent to which a substance is dissolved in water.

We have to convert the solubility of the  copper(II) iodate from g/mL to molarity and we have;

Number of moles = 0.13 g/413 g/mol = 3.15 * 10^-4 moles

Volume of the solution = 100 mL or 0.1 L

Molarity =  3.15 * 10^-4 moles/0.1 L

= 3.15 * 10^-3 M

We now have;

Ksp = [x] [2x]^2

Ksp = 4x^3

Ksp = 4( 3.15 * 10^-3 )^3

Ksp = 1.25 * 10^-7

Learn more about solubility:https://brainly.com/question/28170449

#SPJ1

It  is true about free radicals. a. they are unstable and highly reactive molecules.

Hydrogen peroxide and hydroxyl ions are two examples of oxygen-containing molecules with an unbalanced number of electrons. The unequal distribution of electrons makes it simple for them to interact with other molecules. To combat free radicals, use antioxidants. Heart disease and cancer are caused by free radicals. an unstable molecule type produced by typical cell metabolism The physiological metabolism produces some of these reactive molecule species (RMS), also known as "Hydrogen peroxide and hydroxyl ions are two examples of oxygen-containing molecules with an unbalanced number of electrons. The unequal distribution of electrons makes it simple for them to interact with other molecules. To combat free radicals, use antioxidants. Heart disease and cancer are caused by free radicals. an unstable molecule type produced by typical cell metabolism The physiological metabolism produces some of these reactive molecules species (RMS), also known as "free radicals" or "oxidants." Cell compartments and cells are hurt or destroyed when RMS concentrations go above a certain free radicals" or "oxidants." Cell compartments and cells are hurt or destroyed when RMS concentrations go above a certain point. These reactive molecules species (RMS), also known as "free radicals" or "oxidants," are a by-product of some physiological processes.

Learn more about free radicals here:

https://brainly.com/question/11631123

#SPJ4

The molarity of a solution containing 104.2 grams of BaCl2 in enough water to make 800 ml of solution is 0.625mol/L.

What is molarity?

Molarity is one of the measures of the concentration in terms of the number of moles of the solute dissolved in particular volume of the solution.

Molarity of BaCl2 can be calculated by,

Molecular mass of BaCl2 is 208.23gmol^-1

Number of moles = mass / molecular mass = 104.2g / 208.23gmol^-1 = 0.50mol.

Molarity = Number of moles / volume = 0.50mol / 0.8L = 0.625mol/L.

Therefore, molarity of a solution containing 104.2 grams of BaCl2 in enough water to make 800 ml of solution is 0.625mol/L.

To learn more about molarity click on the given link https://brainly.com/question/17138838  

#SPJ4

Answer:

You get CaCl2 (Calcium chloride)

Explanation:

Calcium has a +2 charge and chlorine has a -1 charge. You need the net ionic charge to equal zero so you need two chlorine atoms to have the +2 cancel out. You end up with CaCl2.

A shorter, easier way to show chemical reactions, using symbols instead of words, is called a Chemical equation.

All the elements in chemistry have specific name and properties. Along with this, they all have a particular sign like Na for sodium, Ar for Argon and K for potassium.

Rather than writing the full name in words of the elements, we write only the symbols of the element along with the products and the reactants separated by using a arrow pointing towards products side.

For example,

Chemical reaction: Sodium hydroxide reacts with Hydrogen chloride to form Sodium chloride and water.

Chemical equation: NaOH + HCl → NaCl + H₂O.

So, as we can see from the example, the chemical equation is much more easier to understands and shorter.

To know more about chemical equation, visit,

https://brainly.com/question/26694427

#SPJ4

The maximum power output of this heat engine is 39,165.75 kJ/min. The result is obtained by using the value of Carnot Efficiency.

The efficiency of a heat engine is generally expressed as

[tex]\eta = \frac{W}{Q_{h}}[/tex]

Where

The Carnot Efficiency is the maximum efficiency of heat engine that is dependent on the temperatures of the hot source (Th) and the cold sink (Tc). The Carnot Efficiency can be expressed as

[tex]\eta = 1 - \frac{T_{c} }{T_{h}}[/tex]

Where

Given the temperature of the hot source at 477°C and the cold sink at 25°C. The heat is supplied at a steady rate of 65,000 kJ/min.

What is maximum power output of this heat engine?

First, we convert temperature unit from Celsius to Kelvin.

[tex]T_{h} = 477 + 273.15 = 750.15 K[/tex]

[tex]T_{c} = 25 + 273.15 = 298.15 K[/tex]

The Carnot Efficiency is

[tex]\eta = 1 - \frac{T_{c} }{T_{h}}[/tex]

[tex]\eta = 1 - \frac{298.15 }{750.15}[/tex]

[tex]\eta = 1 - 0.39745[/tex]

[tex]\eta = 0.60255[/tex]

The power equals work divided by time. By using the value of Carnot efficiency, the maximum power output is

[tex]\eta = \frac{\frac{W}{t} }{\frac{Q_{h}}{t} }[/tex]

[tex]0.60255 = \frac{\frac{W}{t} }{65.000}[/tex]

[tex]\frac{W}{t} = 65.000 \times 0.60255[/tex]

[tex]\frac{W}{t} = 39,165.75 kJ/min[/tex]

Hence, the maximum power output of this heat engine is 39,165.75 kJ/min.

Learn more about Carnot Efficiency here:

brainly.com/question/15024126

#SPJ4

When 42 grams of potassium chloride (kcl) are dissolved in 3.6 kilogram of water, the resulting solution has a molality of 0.156 m.

The term "molal concentration" is another word for molality. It measures the solute concentration in a solution. There are a variety of terminology that can be used to describe a solution's concentration, including molarity, molality, normality, formality, volume percentage, weight percentage, and parts per million. The term must determine the molecular weight of the solute and the mass of the solvent.

Molality is the best method for transferring concentration since the mass of the solute and solvent in the solution is constant.

Molality = moles of solute/ liters of solution

Moles of KCl = (42g KCl) x (1 mole KCl/74.5513 g) = 0.5633 moles KCl

Water in kg = 3.6 kg

m = 0.5633/3.6

m = 0.156

To know more about molality, visit:

https://brainly.com/question/26921570

#SPJ4

The particles that make up your body or your friend's body doesn't have a greater average kinetic energy as they are equal to them having the same temperature.

This is referred to as the energy possessed by a body by virtue of its motion while temperature is the degree of hotness or coldness of a substance.

We were told that they both have a temperature of  38 degrees Celsius which means that the particles present in both bodies have the same average kinetic energy. We should also note that the higher the temperature, the higher the average kinetic energy and vice versa.

Read more about Kinetic energy here https://brainly.com/question/8101588

#SPJ1

Answer:

Explanation:

Numerous, controlled studies have demonstrated that people who exercise regularly have greater bone density than those who are more sedentary.

Any type of exercise will stimulate the deposition of more bone tissue, but resistance training has a greater effect than cardiovascular activities.

Hope this helps

If a ball has 200 J of kinetic energy when it starts rolling up a ramp, it will also have 200 J of potential energy when it stops rolling up the ramp. Energy overall is constant.

What are kinetic energy and potential energy?

The energy that's also stored in any object as well as system as a result of the its position or component arrangement is known as potential energy. The object or system is unaffected by external factors like air pressure or altitude. Kinetic energy, on the other hand, describes the power of moving particles within a system or an object. In contrast to potential energy, which is independent of other fixed and moving objects in its immediate vicinity, kinetic energy is related to those objects. For instance, the object's kinetic energy would be higher if it is placed at a higher height. Potential energy varies with object mass, height, as well as distance and is not transferable. Kinetic energy can be transferred from a moving

To know about kinetic energy and potential energy from the link

https://brainly.com/question/4836293

#SPJ1

Among the following, the most probable questions that could ask to the farming community are options 1 and 4. These questions addresses the issue and advantages of a crop field.

Farming is way of growing plant or animal varieties cultivating for food and sail. Better planning and designing of farm field gives benefits for farmers.

Farmers should aware of each varieties of their crop and its growth conditions and disadvantages also. Hence the probable questions that could ask to a farming community are does this plan take into consideration damage to the crops caused by extreme weather events

And the fourth option also will this plan increase our farming communities access to new varieties of seeds?

To refer more on farming, search here:

https://brainly.com/question/12586721

#SPJ1

The net ionic equation for the reaction between agno3aq and na2so4aq would be 2Ag+(aq)  + SO4^2-(aq) → Ag2SO4(s)

The net ionic equation shows the chemical species involve in the chemical reaction while the complete ionic equation also involves the spectator ions. The net ionic equation state whether precipitation occurs or not. If the chemical reaction has no net ionic equation it means all are aqueous from no precipitation occurring.

AgNO3 → Ag+ + NO3-

Na2SO4 → 2Na+ + SO4^2-

2AgNO3(aq) + Na2SO4(aq) → 2Ag+(aq) + 2NO3-(aq) + 2Na+(aq) +SO4^2-(aq)

2Ag+(aq) + 2NO3-(aq) + 2Na+(aq) +SO4^2-(aq) → Ag2SO4(s) + 2NaNO3(aq)

2AgNO3(aq) + Na2SO4(aq) → Ag2SO4(s) + 2NaNO3(aq)

We cancel the spectator ions  (NO3^-  and Na^+)

the net ionic equation with states of matter is:

2Ag+(aq)  + SO4^2-(aq) → Ag2SO4(s)

Know more about Ionic Equation at:

https://brainly.com/question/19705645

#SPJ4

Initially, the Flack is the flask filled with water and weighed to find may of water + flask Afla that the Flask is empty flack in noted. emptied and mars ofMass of water in the beaker. calculated by is mars of the flask from. subtracting from this volume of a mass of water + flask.

Flask is calculated using the standard density of water at that ten pleasure. If the flask is not a day from outside at that time, the mass of water will be More than the actual. This results. the higher calculated volume of the flask. As Molar mass. M- MRT PV mass of volatile where Mina's liquid.

Analysis of total nitrogen in organic matrices can be performed using the Dumas method. This ensures the complete combustion of the matrix under oxygen. The resulting gas is reduced with copper and dried with CO2 trapped. Next, quantify nitrogen using a universal detector. Use a thin glass flask with a long neck.

Learn more about Flask here:-https://brainly.com/question/19053646

#SPJ4

The serine proteases use combination of the given strategies catalysis by approximation, non-covalent, covalent and metal ion

Serine proteases catalyze non-covalent bond is a sort of chemical link, generally between macromolecules, that doesn't entail the exchanging of electron pairs but instead involves more diffused types of electromagnetic interactions. In supermolecular chemistry, non-covalent bonds between supermolecules predominate over other types of bonds. The exchange of one or more pairs of electrons between two atoms forms a covalent connection. The two atomic nuclei are drawing these electrons in unison. When there is insufficient space between two atoms' electronegativities for an electron transfer to take place and create ions, a covalent bond is formed.

Learn more about covalent here:

https://brainly.com/question/19382448

#SPJ4

the heat of the water

Explanation:

water heat boils and starts to mske water vapor.

If Ka1 and Ka2 are sufficiently distinct and a polyprotic acid is titrated with a strong base, the pH curve will contain two equivalence points because the two acidic protons will be titrated sequentially.

Titration is a method of chemical analysis in which the amount of a sample's constituents is determined by adding a precise amount of a different substance—one that the desired constituent reacts with in a specific, known proportion—to the sample being tested.

The titrating reagent, or titrant, is gradually added to the process using a standard solution (i.e., a solution of known concentration), which is administered using a burette, which is essentially a long, graduated measurement tube with a stopcock and a delivery tube at its bottom end. The addition comes to an end at the comparable point.

To know more about titration, visit:

https://brainly.com/question/2728613
#SPJ4

According to the given statement 1.96 L  is the new volume assuming temperature is constant.

An volume of a gas is just one where there were no intermolecular attraction forces and all collisions involving atoms or molecules are entirely elastic. It can be seen as a group of perfectly spherical particles that collide but do not otherwise interact with one another.

Initial pressure (P₁): 0.98 atm

Initial volume (V₁): 1.0 L

Final pressure (P₂): 0.50 atm

Final volume (V₂): ?

Boyle's law provides an expression for this for an ideal gas that experiences an isothermal change.

P₁×V₁ = P₂×V₂

V₂ = P₁×V₁ / P₂

V₂ = 0.98 atm * 1.0 l / 0.50 atm

V₂ = 1.96 L

To know more about Ideal gas visit:

https://brainly.com/question/28257995

#SPJ4

The mass number is always the number of protons and neutrons together

Ex: 1 protons and 3 neutrons

Mass number: 4

Atomic number (number of protons): 1

Answer:

mass= volume x density

Explanation:

weight is the measure gravitational force acting on a mass

As one proceeds through the periodic table from left to right, the atom of each element gets smaller. Lithium's higher atomic radius than that of fluorine is most comparable.

Atomic radius, also known as atomic radius, is the total length between an atom's nucleus and its electron's outer orbital. The average or normal distance between the nucleus's center and the edge of the surrounding electron shells is what we refer to as an element's ionic radii.

This is due to the fact that there are higher energy levels, resulting in a wider gap between electrons and protons. The attraction between the remaining electrons and the positive charges nucleus is also reduced as a result of electron shielding, allowing them to move further away from it. As a result, the size and atomic radius grows.

To know more about atomic radii visit:

https://brainly.com/question/14086621

#SPJ4