The final pressure of a sample of gas held in a container with a volume of 6.02 L and a temperature of 59.5℃ is 0.26atm.
How to calculate pressure?The pressure of a given gas can be calculated using Boyle's law equation as follows:
P₁V₁ = P₂V₂
Where;
P₁ = initial pressureV₁ = initial volumeP₂ = final pressureV₂ = final volumeT₁ = initial temperatureT₂ = final temperatureAccording to this question, a given sample of gas is held in a container with the volume of 6.02 L with a temperature of 59.5℃ at a pressure of 1.20 atm. The final pressure can be calculated as follows;
At STP;
V = 22.4LT = 273K1.2 × 6.02/332.5 = P × 22.4/273
0.0217 = 0.082P
P = 0.26atm
Therefore, 0.26atm is the final pressure of the gas.
Learn more about pressure at: https://brainly.com/question/10175101
#SPJ1
what are terms used for solubility or concentration expression ?
Answer:
The correct expression used for solubility is a. grams per 100 grams of solvent. One of the most commonly used methods for expressing the concentrations is molarity.
What's the difference between ionization and dissociation?
Question options:
A)
Ionization breaks ionic bonds, and dissociation breaks covalent bonds.
B)
Ionization involves complete breakdown, while dissociation is only partial.
C)
Ionization breaks covalent bonds, and dissociation breaks ionic bonds.
The difference between ionization and dissociation : Ionization breaks ionic bonds, and dissociation breaks covalent bonds.
Ionization breaks the ionic bond into its constituent ions while dissociation is breaking of bond into its simple constituent. Ionization is a irreversible process and dissociation is reversible process. The bond involves in the process of ionization is ionic bond and the bond involved in the process of dissociation is the covalent bond. The compound related to ionization is ionic compound and the compounds related with dissociation is covalent compound.
Thus, The difference between ionization and dissociation :
(A) Ionization breaks ionic bonds, and dissociation breaks covalent bonds.
To learn more about ionization and dissociation here
https://brainly.com/question/11705378
#SPJ1
-Sulfuric acid, H2SO4, can be neutralized by sodium hydroxide, NaOH. The unbalanced equation is:H2SO4(aq) + NaOH(aq) → Na2SO4(aq) + H2O(l)A student who was asked to balance the reaction wrote the following:H2SO4(aq) + Na2OH(aq) →Na2SO4(aq) + H3O(l)Is this correct? Explain why or why not using what you know about the law of conservation of mass and chemical changes. If necessary, provide the correct balanced equation.- How to balance reactions? include tips
Answer:
No, the student did not balance the equation correctly
The balanced equation of reaction is:
[tex]H_2SO_{4(aq)}\text{ + 2NaOH}_{(aq)}\text{ }\rightarrow\text{ Na}_2SO_{4(aq)}\text{ + 2H}_2O_{(l)}[/tex]Explanation:
The law of conservation of mass states that:
What this simply means in relation to chemical equations is that, there must be the same number of moles of atoms of each element on either side of the reaction
Looking at the equation given by the student, we can clearly see that the correct form of the molecules is not written although we have an equal number of moles shown
Thus, we have the balanced equation of reaction as follows:
[tex]H_2SO_{4(aq)}\text{ + 2NaOH}_{(aq)}\text{ }\rightarrow\text{ Na}_2SO_{4(aq)}\text{ +2H}_2O_{(l)}[/tex]From the above, we can see the balanced equation of reaction
How many grams of fluorine gas occupy 543.2ml and exert 123456 pa of pressure at 29.8 degrees Celsius
Answer:
m = 506 grams of fluorine
Explanation:
Given:
M = 19·10⁻³ kg / mol - molar mass of fluorine
V = 543.2 mL = 543.2·10⁻³ m³
p = 123456 Pa
t = 29.8°C
_____________________
m - ?
Temperature in degrees Kelvin:
T = 273.15 + t = 273.15 + 29.8 = 302.95 K
Clapeyron-Mendeleev law:
p·V = (m/M)·R·T
Mass of fluorine:
m = p·V·M / (R·T)
m = 123456·543.2·10⁻³·19·10⁻³ / (8,31·302.95) ≈ 0.506 kg
or m = 506 g
What is known about the first forensic laboratory?
A.
It was opened by the Los Angeles Police Department.
B.
It was started by the Federal Bureau of Investigation.
C.
It opened in the late 1800s.
D.
It was built by a Chinese emperor in the 1200s.
Answer:
It was started by the FBI
The molar mass of oxygen gas (O2) is 32.00 g/mol. The molar mass of C3H8 is 44.1 g/mol. What mass of O2, in grams, is required to completely react with 0.025 g C3H8?"Determine the mass of each of the following compounds, rounding molar masses of elements to the gram before adding up the total: C3H8 (propane)"
The molar mass of oxygen gas (O2) is 32.00 g/mol.
The molar mass of C3H8 is 44.1 g/mol.
This kind of reaction is a combustion:
C3H8 + 5O2 → 3CO2 + 4H2O (In a combustion we obtain CO2 and H2O. Don't forget to balance this equation)
Procedure:
Let's use stoichiometry to solve this
44.1 g C3H8 --------- 5 x 32.00 g O2
0.025 g C3H8 --------- X
X = 0.091 g O2
Answer: mass of O2 required = 0.091 g
Which statement describes how a macroscopic property of gases provides information about microscopic gas particles?A. Gases fill their container, showing that gas particles are not tied together and can move far apart.B. Gases fill their container, showing that gas particles are strongly attracted through electrostatic forces.C. Gases have a fixed volume, showing that gas particles are strongly attracted through electrostatic forces.D. Gases have a fixed volume, showing that gas particles are not tied together and can move far apart.
It's important to know that gases don't have a defined volume as solids do because they don't have a definite shape.
Also, gas partcles are not tied together because their intermolecular forces are weak, this enables them to travel away one from another.
Therefore, the answer is A.
HELP PLEASEEEEE!!!!!!
Organism – Squid
Number of chromosomes after meiosis: 26
Number of chromosomes in the body cells: 52
Number of chromosomes in gametes: 26
Number of chromosomes after mitosis: 52
Organism – Sunflower
Number of chromosomes after meiosis: 19
Number of chromosomes in the body cells: 38
Number of chromosomes in gametes: 19
Number of chromosomes after mitosis: 38
Organism – Pea plant
Number of chromosomes after meiosis: 7
Number of chromosomes in the body cells: 14
Number of chromosomes in gametes: 7
Number of chromosomes after mitosis: 14
Organism – Cow
Number of chromosomes after meiosis: 30
Number of chromosomes in the body cells: 60
Number of chromosomes in gametes: 30
Number of chromosomes after mitosis: 60
Chromosome are made up of genetic material called DNA and it looks like a thread. It is present in the inside of nucleus of a cell.
During meiosis number of chromosomes would be reduced to half whereas in mitosis number of chromosomes remains the same.
The number of chromosomes in body cells is the chromosomal number of an organism and in gametes it would be reduced to half.
To know more about Chromosomes
https://brainly.com/question/14451247
#SPJ1
What is the mass in grams of 8 moles of ammonia, NH3?
The first step to find the mass of the 8 moles of NH₃ is to find the molar mass of NH₃. The molar mass of any compound is the mass of one mol of it. To calculate it, we have to look for the atomic masses of the elements that the molecule has.
N: 14.01 amu
H: 1.01 amu
Then the molar mass of NH₃ will be:
molar mass of NH₃ = 14.01 + 3 * 1.01
molar mass of NH₃ = 17.04 g/mol
Now that we know the molar mass of NH₃ (the mass of one mol of it) we can easily find the mass of 8 moles.
mass = 8 moles of NH₃ * 17.04 g/mol = 136.32 g
mass = 136.32 g
Answer: the mass in grams of 8 moles of ammonia is 136.32 g
Calculate the energy and frequency of red light having a wavelength of 650 nm (Note => 650 nm = 6.50 * 10^7 m)
The energy and frequency of the red light would be 2.88 × 10⁻¹⁹ Joules and 4.615 × 10¹⁴ Hz respectively if the red light has a wavelength of 650
nm.
What is Wavelength?It can be understood in terms of the distance between any two similar successive points across any wave for example wavelength can be calculated by measuring the distance between any two successive crests.
C = λν
As given in the problem we have to calculate the energy of the light if the wavelength of light is 6.5 × 10⁻⁷ meters.
The frequency of the red light = 3 × 10⁸ / 6.5 × 10⁻⁷
= 4.615 × 10¹⁴ Hz
The energy of the red light = h ν
= 6.26 × 10⁻³⁴ × 4.615 × 10¹⁴
= 2.88 × 10⁻¹⁹ Joules
Thus, the energy and frequency of the red light would be 2.88 × 10⁻¹⁹ Joules and 4.615 × 10¹⁴ Hz respectively.
To learn more about wavelength, refer to the link given below ;
brainly.com/question/7143261
#SPJ1
What is the number of molecules in
500m cube of Oxygen at room temperature
4.95 is the number of molecules in 500m cube of Oxygen at room temperature and pressure
we have got data
pressure=1atm
temperature=298 k
volume=500 m^3
gas constant, R=8.31
now, by applying ideal gas equation
PV=nRT
1×500=n×8.31×298
n=2476.38/500
n=4.95
It is the lowest part of the material and has chemical elemental properties. Atoms do not independently exist; rather, they combine to form ions and molecules, which then combine to form the material that we can see, feel, and touch.
Molecules are made up of one or more atoms connected by covalent (chemical) connections. Atoms can be visualized as circles with a nucleus in the center (made up of protons and neutrons) and one or more concentric circles around it that indicate the "shells" or "levels" in which the electrons surrounding the atom's nucleus are located, as well as markings that identify the electron. each level
To know more about molecules visit : https://brainly.com/question/11405437
#SPJ9
Give the number of valence electrons in krypton. Write out the electronic configuration for the valence electrons. Valence electrons: _______ Electronic configuration for the valence electrons: ________
ANSWER
[tex]\begin{gathered} \text{ Valence electrons; 8} \\ \text{ Electronic configuration for the valence electrons; 4s}^2\text{ 4p}^6 \end{gathered}[/tex]EXPLANATION
Krypton is an example of a noble gas. Noble gases are not reactive because their octet state has been completely filled. Krypton belongs to group 0 or 18.
Since the octet state is completely filled, then the number of electrons at the outermost shell is 8
Therefore, the valence electrons of Krypton is 8
The electronic configuration of the valence electron is written below as
[tex]\text{ 4s}^24p^6[/tex]A piece of magnesium ribbon is reacted with excess hydrochloric acid to produce aqueous magnesium chloride
and hydrogen gas. The volume of the dry hydrogen gas produced is 45.6 milliliters. The temperature of the gas
is 293 K, and the pressure is 99.5 kilopascals.
Balance the given equation using the smallest whole number coefficients.
___Mg(s) + ___HCl(aq) →> ___MgCl₂(aq) + ____H₂(g)
The balanced chemical equation between magnesium and hydrochloric acid is Mg + 2 HCl[tex]\rightarrow[/tex] MgCl₂ + H₂
What is a chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ1
Metals reacts with hydrogen halides to produce metallic halides easily and the reaction evolves hydrogen gas. The balanced reaction of Mg and HCl is written as follows:
[tex]Mg (s) + 2HCl \rightarrow MgCl_{2} (aq)+ H_{2}(g)[/tex]
What is a balanced reaction?A balanced reaction is represented by a chemical equation, in which each elements are equal in number on both side of the reaction. Thus the coefficients of reactants must be in proper stoichiometric ratios.
Metals easily reacts with hydrogen halides such as HCl, HBr, HF etc to form their metal halides. This reaction evolves hydrogen gas. Metals are highly electropositive and they can donate electrons to the electronegative atoms such as Cl.
In the given reaction, there are 2 hydrogens and two chlorines in the product side. Thus We have to multiply HCl by 2. Thus, there will be equal number of hydrogens in both side and similar for Mg and chlorines.
Therefore, the balanced reaction is :[tex]Mg (s) + 2HCl \rightarrow MgCl_{2} (aq)+ H_{2}(g)[/tex]. and the whole number coefficients are 1,2,1,1.
To find more about balanced reactions, refer the link below:
https://brainly.com/question/22064431
#SPJ1
A solution is prepared by mixing 500. mL of 0.10 M NaOCl and 500. mL of 0.20 M HOCl. What is the pH of this solution? [Ka(HOCl) = 3.2 × 10–8 ]
The pH of the solution is calculated as 7.2.
What is the pH of the solution?Let us recall that we can make us of the Henderson–Hasselbalch equation
to obtain the pH of the solution if we would follow the steps that have been itemized below.
Number of moles of the acid = 500/1000 L * 0.20 M = 0.1 moles
Number of moles of salt = 500/1000 L * 0.1 M = 0.05 moles
Total volume of the solution = 500 mL + 500 mL = 1000 mL or 1L
Now;
Molarity of the acid = 0.1 moles/1 L = 0.1 mol L-1
Molarity of the salt = 0.05 moles/1 L = 0.05 molL-1
Then we apply the equation;
pH = pKa + log[(A-)/(HA)]
pKa = - log (Ka) = - log(3.2 × 10^–8) = 7.5
Thus we have;
pH = 7.5 + log (0.05/0.1)
pH = 7.5 - 0.3
pH = 7.2
Learn more about pH:https://brainly.com/question/15289741
#SPJ1
What two properties change that would cause a boiled egg to drop into a container, that’s mouth was smaller than the egg? 1. Temperature 2. Pressure 3. Volume 4. Number of particles
Answer:
2. Pressure
4. Number of particles.
Explanation:
If we drop a boiled egg into a container with a smaller mouth than the egg, we can note a change in the pressure inside the container, because initially, we have the atmospheric pressure inside the container but the egg will impose a different pressure inside; and the number of particles will be affected too because we suppose that the container is exchanging particles with the ambient so we wouldn't have an exact amount of particles in the container because of this exchange dynamic, so if the egg is covering the mouth of the container, the number of particles would be constant.
The answers would be 2. Pressure and 4. Number of particles.
In the titration of 64.0 mL of 0.400 M HCOOH with 0.150 M LiOH, how many mL of LiOH are required to reach the halfway point?
The volume of the base, LiOH required to reach the halfway point will be 170.6 mL.
The balanced chemical equation for this reaction will be:
HCOOH +LiOH → HCOOHLi + [tex]H_{2}O[/tex]
It can be observed that,
The mole ratio of HCOOH ([tex]n_{a}[/tex], acid) = 1
The mole ratio of LiOH ([tex]n_{b}[/tex], base) = 1
Volume of acid, HCOOH ([tex]V_{a}[/tex] = 64.0 mL
Molarity of acid, HCOOH ([tex]M_{a}[/tex]) = 0.4 M
Molarity of base, LiOH ([tex]M_{b}[/tex]) = 0.150 M
The volume of a base can be determined by the formula:
Ma×Va / Mb ×Vb = nA / nB.....(i)
Now, put the given data in above formula:
(0.4 × 64) / (0.150 × [tex]V_{b}[/tex]) = 1
25.6 / (0.150 × [tex]V_{b}[/tex]) = 1
By solving it:
0.150 × [tex]V_{b}[/tex] = 25.6
[tex]V_{b}[/tex] = 25.6 / 0.150
[tex]V_{b}[/tex] = 170.6 mL
Therefore, the volume of the LiOH required to reach the halfway point will be 170.6 mL.
To know more about halfway point
https://brainly.com/question/17329525
#SPJ1
9. Determine the percent compositions for each of the following compounds. a. Ba(OH)2 b. copper (I) oxide C. Fe(C2H3O2)3 d. iron (III) nitrate hexahydrate (*see notes on backside to help with the hexahydrate part)
Answer:
Iron 24.03%
Carbon 30.90%
Hydrogen 3.86%
Oxygen 41.20 %
Explanation:
Here, we want to get the percentage composition of the given compound
What this means is that we want to get the percentage composition of each of the elements present in the compound
Firstly, we calculate the molar mass of the given compound
We can calculate the molar mass by adding the atomic masses of the elements and their multiplicities
Mathematically, we have that as:
[tex]\begin{gathered} 56\text{ + 3\lparen2\lparen12\rparen + 3\lparen1\rparen +2\lparen16\rparen\rparen} \\ =\text{ 56 + 3\lparen24+3+32\rparen} \\ 56\text{ + 177 = 233 g/mol} \end{gathered}[/tex]Now, let us get the percentage compositions
For Iron, we have:
[tex]\frac{56}{233}\times\text{ 100 \% = 24.03 \%}[/tex]For Carbon, we have:
[tex]\frac{72}{233}\times\text{ 100 \% = 30.90 \%}[/tex]For Hydrogen, we have:
[tex]\frac{9}{233}\times\text{ 100 \% = 3.86 \%}[/tex]For Oxygen, we have:
[tex]\frac{96}{233}\times\text{ 100 \% = 41.20\%}[/tex]A 6.5 L gas sample at 298 K and 0.51
atm expands until a volume of 9.9 L is
reached. What will be the final
temperature if the final pressure is
0.65 atm? Please show the work.
The final temperature if the final pressure is 0.65 atm will be 585 K
It is given that
Initial Volume of sample = V1 = 6.5 L
Initial temperature = T1 = 298 K
Initial pressure = P1 = 0.51 atm
Final Volume = V2 = 9.9 L
Final temperature = T2 = ?
Final pressure = P2 = 0.65 atm
Gay-Lussac's law - The pressure of a gas is directly proportional to the. temperature when volume and amount of substance is constant. P1/T1 = P2/T2 Combined gas law P1V1/T1 = P2V2/T2 Use the gas laws for pressure, volume and temperature calculations.
P1V1/T1 = P2V2/T2
0.52 x 6.5/298 = 0.65 x 9.9/T2
0.011 = 6.435/T2
T2 = 585 K
Hence, final temperature if the final pressure is 0.65 atm will be 585 K
Learn more about Temperature here:
https://brainly.com/question/25677592
#SPJ13
you find the density of an object 4 times 1.3g/ml 1.25g/ml 1.17g/ml and 1.22g/ml now determine the percent deviation from the mean
Firstly we will determine the average or the mean of the objects density:
[tex]\begin{gathered} Mean=\frac{1.3g•mL^{-1}+1.25g•mL^{-1}+1.17g•mL^{-1}+1.22g•mL^{-1}}{4} \\ Mean=\frac{4.94g•mL^{-1}}{4} \\ Mean=1.235 \end{gathered}[/tex]Now we will calculate the deviation. The deviation is how much is trial is different from the average. We take the absolute value so the answers can be positive:
[tex]\begin{gathered} Trial\text{ }1:|1.3-1.235|=0.065 \\ Trial\text{ }2:|1.25-1.235|=0.015 \\ Trial\text{ }3:|1.17-1.235|=0.065 \\ Trial\text{ }4:|1.22-1.235|=0.015 \end{gathered}[/tex]We will determine the average of the deviation:
[tex]\begin{gathered} Deviation\text{ }mean=\frac{0.065+0.015+0.065+0.015}{4} \\ Deviation\text{ }mean=0.04 \end{gathered}[/tex]To determine the percent deviation we:
[tex]\begin{gathered} \%\text{ }deviation=\frac{mean\text{ }deviation}{mean}\times100 \\ \\ \%\text{ }deviation=\frac{0.04}{1.235}\times100 \\ \\ \%\text{ }deviation=3.24\% \end{gathered}[/tex]Answer: The percent deviation from the mean is 3.24%,
identify the functional group and name the compound ch3ch2ch2ch2ch2ch2cho
Answer: valeraldehyde
Explanation:
I had to memorize this one
The functional group present is aldehyde and name of compound is valeraldehyde.
What are functional groups?Functional group is defined as a substituent or group of toms or an atom which causes chemical reactions.Each functional group will react similarly regardless to the parent carbon chain to which it is attached.This helps in prediction of chemical reactions.
The reactivity of functional group can be enhanced by making modifications in the functional group .Atoms present in functional groups are linked to each other by means of covalent bonds.They are named along with organic compounds according to IUPAC nomenclature.
Functional group inter conversion is also possible by retro -synthesis.In some cases , functional groups can be charged molecules.
Learn more about functional groups,here:
https://brainly.com/question/14618322
#SPJ2
The following lists consists of ionic compounds EXCEPT
barium hydroxide, zinc carbonate, ammonium sulfate
calcium chloride, carbon disulfide, magnesium nitrate
sodium sulfate, copper(II) oxide, potassium nitride
aluminium sulfide, sodium sulfite, calcium fluoride
Except for NACLE, the is made up of ionic compounds. Carbon disulfide bonds are not ionic due to their weak and trivial polarity. Carbon disulfide bonds are covalent due to the small difference in electronegativities of carbon and sulfur.
What makes an ionic bond?Ionic bond, also known as electrovalent bond, is a type of linkage formed in a chemical compound by the electrostatic attraction of oppositely charged ions. When the valence (outermost) electrons of one atom are permanently transferred to another, a bond is formed.After two or more atoms lose or gain electrons to form an ion, an ionic bond can form. Ionic bonds form when metals lose electrons and nonmetals gain electrons. Ions with opposite charges attract each other, forming an ionic bond.To learn more about Ionic Bond, refer to:
https://brainly.com/question/977324
#SPJ13
How many grams of calcium fluoride are in 1.5 moles of calcium fluoride?
The number of grams of calcium fluoride in 1.5 moles of calcium fluoride is 88.5grams.
How to calculate mass?The mass of a substance or compound can be calculated by multiplying the number of moles of the substance by its molar mass as follows:
mass = no of moles × molar mass
According to this question, there are 1.5 moles of calcium fluoride (CaF). The molar mass of calcium fluoride can be calculated as follows:
CaF = 40g/mol + 19g/mol = 59g/mol
mass = 59g/mol × 1.5mol
mass = 88.5grams.
Therefore, 88.5grams of calcium fluoride is present in 1.5 moles of the compound.
Learn more about mass at: https://brainly.com/question/12310796
#SPJ1
Name the attatched alkene
Answer:
limonene molecule.
Explanation:
During her presentation, Zahara was asked several questions from the audience and to provide the molecular formula for molecules that the audience had questions about. Help Zahara show the molecular formula for the following compounds: Trisilicon tetranitride
Because tri means 3, there are 3 silicon atoms, and tetra means 4, so there will be 4 nitrogen atoms, the answer is:
[tex]_{N_4Si_{3_{}}}[/tex]9) A base can release hydroxide ions in a solution. In this following reaction, which
one is the base?
NaOH(s) + H20(1) - Na+(aq) + OH-(ag)
Answer:
NaOH
Explanation:
Sodium hydroxide is a proton acceptor. Metal hydroxides are almost always bases. H₂O is water and is neutral. Sodium is a positively charged metallic ion. Hydroxide is a negatively charged ion.
What is the difference between concentrated and dilute with strong and weak?
The strength is a measure of the degree of ionization of a substance in an aqueous solution.
Some substances are strong and they dissociate completely (this is the case of hydrochloric acid, HCl, in water), some are weak and they do not dissociate completely (like acetic acid, CH3COOH).
The concentration is a measure of the amount of the substance in a solution and it is usually explessed in moles or percentage. It is a ratio of the substance to the solvent. A concentrated solution is a solution with a high percentage of the substance (solute) in the solution, and a dilute one is a solution with a low percentage of solute.
fig. 15 shows a simplified diagram of the electrolysis of a molten electrolyte containing lithium chloride. b. Describe how the electron configuration of each lithium ion changes when it arrives at the cathode. You may draw a diagram to help you answer this question.
During the electrolysis of the molten lithium chloride, the Lithium ions (Li⁺) at the cathode undergoes reduction, and the electron configuration of lithium becomes 1s²2s¹.
What is electrolysis?Electrolysis can be described as the process in which the electric current is passed through the chemical compound to break them. In this process, the atoms and ions are interchanged by the addition or removal of electrons.
The ions are allowed to move freely in this process. When an ionic compound is melted or dissolved in water then ions are produced which can move freely.
During the electrolysis of molten lithium chloride, the lithium ions reach the cathode and accept the electrons while chloride ions reach at anode and loss electrons to become chlorine gas.
At anode : 2 Cl⁻ → Cl₂ + 2e⁻
At cathode: 2 Li⁺ + 2e⁻ → Li
Learn more about electrolysis, here:
https://brainly.com/question/12054569
#SPJ1
i need to put 5 grams of hydrogen through two sets of chemical reactions, one resulting in a covalent outcome, the other resulting in an ionic outcome. I also need to balance the equations used during this process as well as calculate the number of molecules produced by the covalent compound, and the mass of the ionic product.This is a big project in my chemistry class and I've chosen Hydrogen as my element to use throughout these chemical reactions. I will provide the assignment outline and the work I've done so far :)thank you so very much for the help!
2H2(g) +O2(g) → 2H2O(g)
Mass = 5 g : :
Moles = 4.96 : : 4.96
1.1 number of moles for hydrogen :
moles = mass /Molecular mass
= 5g/1,00784
=4.96 moles
1.2 Determine molar ratio in oder to get the moles for product 2H2O
we see that :
2 moles of Hydrogen produces: 2 moles of water
so, 4.96 moles of hydrogen will produce : x = 4.96*2 /2 = 4.96
This means that moles for water = 4.96
1.3 Calculating molecules of the productn = 4.96moles
Molecules of H2O = 4.96 mol * 6.022×10^23molecules/1mol
=2.99x10^24 molecules
9. Which statement provides evidence that supports the Big Bang Theory?* 2 points
O the universe began as a very high density singularity
Small spiral galaxies become larger elliptical galaxies
Dark matter makes up the majority of matter in the galaxy.
The chemical makeup of the universe has changed dramatically
The statement the chemical makeup of the universe has changed dramatically provides evidence that supports the Big Bang Theory (Option D).
What is the Big Bang Theory?The Big Bang Theory is a widely accepted theory in physics that states all the universe began with a huge explosion and form then matters expanded in space at the same time that it is cooling.
Therefore, with this data, we can see that the Big Bang Theory states that the chemical composition of the universe associated with hydrogen and helium modified since this explosion.
Learn more about the Big Bang Theory here:
https://brainly.com/question/1973038
#SPJ1
Answer:
d
Explanation:
ions can travel directly from the cytoplasm of one animal cell to the cytoplasm of an adjacent cell through _____.
Ions can travel directly from the cytoplasm of one animal cell to the cytoplasm of an adjacent cell through gap junctions.
What is cytoplasm?Cytoplasm is the gelatinous liquid that fills the inside of a cell.
The cytoplasm is composed of water, salts, and various organic molecules. Some intracellular organelles, such the nucleus and mitochondria, are enclosed by membranes that separate them from the cytoplasm.
The cytoplasm has the following functions :
The cytoplasm functions to support and suspend organelles and cellular molecules.The cytoplasm also has many cellular processes which occur in them such as protein synthesis, the first stage of cellular respiration (known as glycolysis), mitosis, and meiosis.Learn more about the cytoplasm at: https://brainly.com/question/174023
#SPJ1