Answer:
yeah
Explanation:
Image result for The highest level of organization for living things is the biosphere; it encompasses all other levels. The biological levels of organization of living things arranged from the simplest to most complex are: organelle, cells, tissues, organs, organ systems, organisms, populations, communities, ecosystem, and biosphere.
The highest level of organization for living things is the biosphere; it encompasses all other levels. The biological levels of organization of living things arranged from the simplest to most complex are: organelle, cells, tissues, organs, organ systems, organisms, populations, communities, ecosystem, and biosphere.
Which best explains how rotation affects the colors we see in the sky at dawn and dusk?
A.As dawn and dusk, the light from the Sun is fading and phases through all the colors of a prism in a cycle.
B.At dawn and dusk the rotation of Earth slows down so the light from the increased sunlight creates colors.
C.At dawn and dusk, sunlight is closer to Earth’s curved surface, refracting in the atmosphere, creating colors.
D.At dawn and dusk, Earth has rotated closer to the Sun, so the heat creates the colors in the sky.
10 point
10 point
I think that the answer is C.)
It makes the most sense because one or two of the other options talk about the sun getting closer to the earth which makes no sense. Also, the Earth's spinning speed does not slow down so that rules out option B. Lastly, the answer cannot be A whereas the sun's light does not fade, rather the Earth spins with a shadow casting over its back due to no sunlight on that facing side.
Hope this helps and have a nice day.
-R3TR0 Z3R0
Answer:
it's c
Explanation:
i took test
Pls help me out ASAP
A sample of nitrogen dioxide, NO, is held at a temperature of 1195 K in a container with a volume of 25 liters and a pressure of 560 atm. How many grams of NO, are present in the container? Round your answer to two significant figures.
A) 5300g
B) 3300g
C)6600g
D)4900g
For the reaction
3KOH+H3PO4⟶K3PO4+3H2O
how many grams of phosphoric acid, H3PO4, are needed to react completely with 89.7 g of potassium hydroxide, KOH?
Answer:
52.2 g
Explanation:
Step 1: Write the balanced equation
3 KOH + H₃PO₄ ⟶ K₃PO₄ + 3 H₂O
Step 2: Calculate the moles corresponding to 89.7 g of KOH
The molar mass of KOH is 56.11 g/mol.
89.7 g × 1 mol/56.11 g = 1.60 mol
Step 3: Calculate the moles of H₃PO₄ needed to react with 1.60 moles of KOH
The molar ratio of KOH to H₃PO₄ is 3:1. The moles of H₃PO₄ needed are 1/3 × 1.60 mol = 0.533 mol.
Step 4: Calculate the mass corresponding to 0.533 moles of H₃PO₄
The molar mass of H₃PO₄ is 97.99 g/mol.
0.533 mol × 97.99 g/mol = 52.2 g
4. Diffuse reflection occurs when parallel light waves strike which surface?
Answer:
rough surface
Explanation:
Diffuse reflection occurs when parallel light waves strike a rough surface
Answer:
Rippling fountain
Explanation:
True or False
When burning wood in an open system, mass is conserved?
Answer:
False!
Explanation:
The law of conservation of mass states that matter cannot be created or destroyed in a chemical reaction. For example, when wood burns, the mass of the soot, ashes, and gases equals the original mass of the charcoal and the oxygen when it first reacted.
Sevin, the commercial name for an insecticide used to protect crops such as cotton, vegetables, and fruit, is made from carbamic acid. A chemist analyzing a sample of carbamic acid finds 0.8007 g of carbon, 0.9333 g of nitrogen, 0.2016 g of hydrogen, and 2.133 g of oxygen. Determine the empirical formula for carbamic acid. 7. When 1.916 g of titanium is strongly heated in a stream of pure oxygen, a metal oxide sample weighing 3.196 g results. Calculate the empirical formula of the oxide.
Answer:
Explanation:
Ratio of mass of C , N , H and O
= .8007 :0.9333:0.2016:2.133
Ratio of moles of C , N , H and O
= .8007/12 : .9333 / 14 : 0.2016 / 1 : 2.133/16
= .0667 : .0667: .2016 : .1333
= .0667 / .0667 : .0667 / .0667 : .2016 /.0667 : .1333 / .0667
= 1 : 1 : 3: 2
Hence empirical formula = CNH₃O₂
7 .
Weight of titanium Ti = 1.916 g
Weight of oxygen = 3.196 - 1.916 = 1.28 g
Ratio of weight of Ti and O
= 1.916 : 1.28
Ratio of moles of Ti and O
1.916/48 : 1.28/16 [ Molecular weight of Titanium is 48 ]
= .04 : .08
= .04/.04 : .08/.04
= 1 :2 .
Empirical formula
TiO₂
what do The representative elements include
Answer:
aajajjajajajajajajajajdsjsjjx jajajjajajajajaisjn
Explanation:
4. Why does iron corrode faster in salt water?
~My Answer~:
Water is the enabler of fast oxidation of iron so freshwater will also cause rust. However, salt water is a very good conductor (lots of dissociated ions) and so there are a number of electrolysis reactions that tremendously accelerate corrosion in salt water.
What causes the sugar to dissolve in water?
Answer:
Sugar dissolves in water because energy is given off when the slighty polar sucrose molecules form intermoleeular bonds with the polar water molecules.
Explanation:
Answer:
PORS U N DISOLVENTE ELAGA YU E LAZUCR UAE SOLN TOU
Explanation:
What kind of elements separate the metals from the nonmetals on the periodic table of elements?
Answer: Metalloids
Explanation:
The dark “stair step” line on the right side of the periodic table is where the metalloids are. Metalloids “touch” the SSL. (Stair step line)
The metals are to the left of the SSL and the non metals are to the right of the SSL.
Ancient Romans built often out of bricks and mortar. A key ingredient in their mortar was quicklime (calcium oxide), which they produced by roasting limestone (calcium carbonate). 1. Write a balanced chemical equation, including physical state symbols, for the decomposition of solid calcium carbonate (CaCO3) into solid calcium oxide and gaseous carbon dioxide. CaCO3s→CaOs+CO2g 2. Suppose 48.0L of carbon dioxide gas are produced by this reaction, at a temperature of 260.0°C and pressure of exactly 1atm. Calculate the mass of calcium carbonate that must have reacted. Round your answer to 3 significant digits.
Answer:
110 g
Explanation:
Step 1: Write the balanced equation for the decomposition of calcium carbonate
CaCO₃(s) ⇒ CaO(s) + CO₂(g)
Step 2: Convert 260.0 °C to Kelvin
We will use the following expression.
K = °C + 273.15 = 260.0 + 273.15 = 533.2 K
Step 3: Calculate the moles of CO₂ produced
We will use the ideal gas equation.
P × V = n × R × T
n = P × V/R × T = 1 atm × 48.0 L/0.0821 atm.L/mol.K × 533.2 K = 1.10 mol
Step 4: Calculate the moles of CaCO₃ that reacted to produce 1.10 moles of CO₂
The molar ratio of CaCO₃ to CO₂ is 1:1. The moles of CaCO₃ that reacted are 1/1 × 1.10 mol = 1.10 mol.
Step 5: Calculate the mass corresponding to 1.10 moles of CaCO₃
The molar mass of CaCO₃ is 100.09 g/mol.
1.10 mol × 100.09 g/mol = 110 g
Two people are pushing a couch from opposite sides. One person is pushing to the right with a force of N. The other person is pushing to the lell William
4 N. Which of the following best describes the movement of the couch?
A. The couch will move to the left with a force of IN
B. The couch will not move.
C. The couch will move to the right with a force of 7 N
D. The couch will move to the left with a force of 7N
Answer:
The couch will not move because the people are not working together. Maybe if they call someone to help they can make some progress.
A molecule which contains two atoms of the same or different
elements can be referred to as a ---- molecule.
Answer:
my network was gone so I cant
Answer:
Diatomic. molecule
hope it helps
and yr day will be full of happiness
PLEASE HELP ME!!
CHEMISTRY DIMENSIONAL ANALYSIS SUPER EASY!!
WILL GIVE BRAINLIEST TO THE !!*CORRECT ANSWER*!!
The density of chocolate is 1.325 g/cm^3. How many cups would 20,000 mg of chocolate be?
Answer:
Cup of volume [tex]0.0675[/tex] cubic centimeter is required
Explanation:
Given
Density of the Cup [tex]= 1.325[/tex] g/cm^3
Total weight of the chocolates [tex]= 20,000[/tex] mg or 20 grams
Density is equal to mass divided by volume
Volume of the chocolates
[tex]\frac{1.325}{20} \\= 0.0675[/tex] cubic centimeter
13. Describe the flow of thermal energy.
Plz help
Answer: Thermal energy refers to the energy contained within a system that is responsible for its temperature. Heat is the flow of thermal energy. ... This energy is usually in the form of low-level thermal energy. Here, low-level means that the temperature associated with the thermal energy is close to that of the environment. hope this helps. Can u pls give me brainliest
Explanation:
please help due in 1 hour. This is 7th grade science. & in return I’ll help you on something! 15 points
Answer: MCCCMC
Please. Mark as brainliest
Someone please help!
Answer:
1.281 Latm/molK
how many atoms are in 4 H2PO4
Answer:
7
Explanation:
just add p has 1 o has 4 and h has 2
Why do buffer systems use either a weak acid or a weak base?
Weak acids and weak bases do not react easily.
Weak acids and weak bases are partially dissociated.
Weak acids and weak bases are unaffected by temperature.
Weak acids and weak bases are found in abundance on the earth.
Answer:
Weak acids and weak bases are only partially dissociated.
Explanation:
When a small amount of an acid or a base is added to water (or a solution of some strong acid or base of some certain [tex]pH \![/tex],) the [tex]pH[/tex] of that solution tends to change significantly.
In contrast, when the same amount of acid or base is added to a buffer system of some certain [tex]pH\![/tex], the [tex]pH[/tex] of this system tends to change by a much smaller amount.
Weak acids and weak bases dissociate only partially. That allows the buffer solutions to contain a large reservoir of both the (undissociated) weak acid (or weak base) and the corresponding conjugate ion, while maintaining the required [tex]pH[/tex].
This reservoir of the partially-dissociated weak acid (or weak base) and its conjugate ion allows the buffer system to absorb [tex]\rm H^{+}[/tex] and [tex]\rm OH^{-}[/tex] that were added to the solution without much change to the [tex]pH[/tex].
For example, consider a [tex]1\; \rm L[/tex] buffer solution that initially included [tex]0.1\; \rm mol[/tex] of acetic acid [tex]\rm CH_3COOH[/tex] (a weak acid with [tex]pK_\text{a} = 4.765[/tex]) and [tex]0.1\; \rm mol\![/tex] of sodium acetate [tex]\rm CH_3COONa[/tex]. The [tex]pH[/tex] of this solution would be [tex]4.765[/tex].
In contrast, if a solution of [tex]\rm HCl[/tex] (a strong acid) and an equal amount of [tex]\rm NaCl[/tex] also needs to be [tex]4.765[/tex], only [tex]10^{-4.765}\; \rm mol \approx 0.0000172\; \rm mol[/tex] of each species could be included.
Assume that [tex]0.001\; \rm mol[/tex] of [tex]{\rm NaOH}\, (s)[/tex] is added to the buffer solution of [tex]\rm CH_3COOH[/tex] and [tex]\rm CH_3COONa[/tex]. The quantity of the partially-dissociated weak acid in this solution is much larger than that of the [tex]\rm OH^{-}[/tex] added to the solution.
Only a small portion of the weak base would be consumed.The [tex]pH[/tex] of the solution would likely change by less than [tex]0.001[/tex].
In contrast, assume that [tex]0.001\; \rm mol[/tex] of [tex]{\rm NaOH}\, (s)[/tex] is added to the [tex]1\; \rm L[/tex] solution with [tex]0.0000172\; \rm mol[/tex] of [tex]\rm HCl[/tex] (fully-dissociated) and [tex]\rm NaCl[/tex].
All the [tex]\rm HCl\![/tex] in this solution would be consumed. The [tex]pH[/tex] of this solution would go well above [tex]7[/tex].
Answer:
Weak acids and weak bases are partially dissociate
Explanation:
I took the test and got 100%
12. In rocket fuel (as in many of the balloons we blow up in class), hydrogen gas (H2) reacts with oxygen gas (O2) to form water vapor. a) Write a balanced reaction for the process. b) Suppose you have a mini rocket and access to 2.50 L of oxygen gas and 4.00 L of hydrogen gas. If you use up all of the gas possible blasting off your rocket, how many liters of water vapor did you produce (at the same temperature as the original mixture)
Answer: a) [tex]2H_2(g)+O_2(g)\rightarrow 2H_2O(g)[/tex]
b) 4.00 L of [tex]H_2O[/tex] will be produced
Explanation:
a) The balanced chemical reaction is:
[tex]2H_2(g)+O_2(g)\rightarrow 2H_2O(g)[/tex]
b) According to avogadros law, equal moles of gases occupy equal volumes at same temperature and presure conditions.
According to stoichiometry :
2 L of [tex]H_2[/tex] require = 1 L of [tex]O_2[/tex]
Thus 4.00 L of [tex]H_2[/tex] will require=[tex]\frac{1}{2}\times 4.00=2.00L[/tex] of [tex]O_2[/tex]
Thus [tex]H_2[/tex] is the limiting reagent as it limits the formation of product and [tex]O_2[/tex] is the excess reagent.
As 2 L of [tex]H_2[/tex] give = 2 L of [tex]H_2O[/tex]
Thus 4.00 L of [tex]H_2[/tex] give =[tex]\frac{2}{2}\times 4.00=4.00L[/tex] of [tex]H_2O[/tex]
Thus 4.00 L of [tex]H_2O[/tex] will be produced
a. The balanced reaction for the process should be 2h_2(g) + O_2(g) ⇒2H_2O(g)
b. The number of liters of water vapor should be 4.00 liters of H_2O.
Avogadro's law:a. The balanced reaction for the process should be 2h_2(g) + O_2(g) ⇒2H_2O(g)
b. As per the law, the equal moles of gases occupied equal volumes at the similar temperature
So, the number of liters should be
= 2/2*4.00
= 4.00 of H_2O
Learn more about the reaction here: https://brainly.com/question/4417455
At which point does condensation occur in this water cycle diagram?
The Water Cycle
B
D
OA A
ОВ. В
О с. С
OD. D
Answer: B
Explanation:
A is evaporation. B is condensation. C is precipitation.
Answer:
it would be b
Explanation:
b would be condensation
What is in between the nucleus and electrons of an atom?
Answer:
The empty space between the atomic cloud of an atom and its nucleus is just that: empty space, or vacuum. ... Electrons are thus 'spread out' quite a bit in their orbits about the nucleus. In fact, the wave-functions for electrons in s-orbitals about a nucleus actually extend all the way down into the nucleus itself.
Which substance is not a fossil fuel?
Which of the following describes an exothermic reaction?
O A. AHt, reactants > AHf, products
B. AHF, reactants = AHf, products
O C. AHf, reactants = 0
O D. AHF, reactants < AHt, products
The option A describes an exothermic reaction.
i.e, ΔHt,reactant > ΔHt, product
What is exothermic reaction?The reaction in which energy is release during the formation of reaction is called exothermic reaction.
Mathematically,
ΔHf = ΔH(product) - ΔH(reactant)
For exothermic reaction, ΔHt,reactant > ΔHt, product
So,for exothermic reaction, ΔHf is negative.
Where,
ΔHf = Enthalpy of formation of reaction
ΔH(product) = enthalpy of formation of product
ΔH(reactant) = enthalpy of formation of reactant
To learn more about exothermic reaction here.
https://brainly.com/question/10373907
#SPJ3
How does light travel through a solid, liquid, gas, and a vacuum?
Light travels in a straight line as a wave. It does not require any medium or material to travel like sound waves which means it can travel in vacuum.The speed of the light from the special theory of relativity is a constant value of 38x10^8m/second
Which change absorbs heat?
A. Firing a rifle
B. Freezing water into ice
C. Melting cheese
D. Breaking rocks with dynamite
Approximately how far will a p-wave travel in 4 minutes?
Answer:
2000 (km)
Explanation:
:)
CAN SOMEONE PLEASE HELP ME LIKE ACTUALLY !
Atlantic Ocean has been expanding for millions of years. This is because of
volcanoes and earthquakes under the ocean.
plate collisions under the oceans.
convergent boundary.
spreading plates on the sea floor.
(つ ◕.◕ )つ Hey there again!
Answer → Last one Spreading Plates on the Sea Floor
✨Hope this helps✨
PLEASE HELP ME ON QUESTION 6 ASAP!!!!!!!!!!!
Answer:
b tissues,cells,organs,organ system,organisms,populations
Tissues, Cells, Organs, Organ Systems, Organsims, Population. the correct answer is B
vitamin can act like some thing what are those thing and how?
Answer:
Some nutrients also act as antioxidants. These may be vitamins, minerals, proteins, or other types of molecules. They help the body remove toxic substances known as free radicals, or reactive oxygen species. If too many of these substances remain in the body, cell damage and disease can result.