Answer:
N= 678
Explanation:
What type of glass absorbs light and does not allow light to pass through it?
reflective
transparent
opaque
refractive
opaque glass does not allow light to pass through it.
After finishing using free weights, the next step is to?
Answer:
g
Explanation:
bhhhhhhjjjhhuydszzzzzzzxz
The best way to choose the baseball bat that's right for you is by choosing one that is not too long and not too __________.
A. round
B. thin
C. heavy
D. colorful
Answer:
C. Heavy
Explanation:
You need to be able to lift the bat.
The source of electromagnetic waves is _____.
vibrating atoms
magnetic fields
electric fields
vibrating electric charges
Answer:
D. Electric Charges
An iron rod and a copper rod of equal length are each held by hand at one end, with the other end in the flame from a Bunsen burner. The copper rod becomes too hot to hold much sooner than the iron rod. What does this information tell you about iron and copper?
Answer:
Iron has a higher heat capacity than copper
Explanation:
The heat capacity of a substance is defined as the amount of heat required to raise the temperature of an object by 1°C.
The higher the heat capacity of a substance, the longer the time it takes for the substance to become hot when heated.
Since the copper rod becomes too hot to hold much sooner than the iron rod, it means that iron has a higher heat capacity than copper.
Next
Comparative Anatomy: Mastery Test
Subm
Which organism is structurally similar to this organism?
Answer:
maybe it is the first one
How much force is required to bring an acceleration of 1.5 m/s square in 1500 kg car
Answer:
2,250N
Explanation:
Force = mass * acceleration due to gravity
force= 1500 * 1.5
force =2250N
Numerical: A capacitor of 200 picofarad is charged to a potential difference of 100 volts. It's plates are then connected parallel to another capacitor them potential difference in this combination fall to 60 volts. What is the capacitance of second capacitor?
(Working of this solution)
Answer:
The capacitance of the other capacitor is 1333.3 pF.
Explanation:
C' = 200 pF, V' = 100 V, C'' , V''= 0
Common potential, V = 60 V
Use the formula of the common potential
[tex]V = \frac{C' V' + C'' + V''}{C'+ C''}\\\\60 = \frac{200\times 100 + 0}{200 + C''}\\\\1200+ 6 C''= 2000\\\\C'' = 1333.3 pF[/tex]
power of a crane is 25000 watt calculate the time required by it to lift a load of 6000 kg up tp the height of 20 m
How much power is consumed by the circuit above?
Power is dissipated, not consumed.
This circuit dissipates 4.5 watts.
Question 2 of 27
A man is trying to drag a small tree that he cut down. If the static coefficient
of friction of the tree on the ground is 0.5 and the tree weighs 670 N, what is
the minimum amount of horizontal force that the man will need to apply so
that the tree will start moving?
A. 670 N
B. 230 N
C. 335 N
D. 465 N
Answer:
Explanation:
Newton's 2nd Law say that F = ma which is the sum of the forces acting on an object is equal to the object's mass times the acceleration at which it is moving. That means that the forces acting on this tree are F which is the Force the man needs to exert to move the tree, and f which is the force the tree is exerting in an effort to stay right where it is. That alters our 2nd Law equation to F - f = ma. BUT if the tree isn't moving, the acceleration is 0, making the whole right side of that equation go to 0. That means that F = f. Phew! Let's do that.
f = μ[tex]F_n[/tex] where f is the frictional force, μ is the coefficient of static friction, and [tex]F_n[/tex] is the weight of the object, which are given as 670 N. Filling in:
f = .5(670) so
f = 335 N (that is not using the rules of significant digits properly, but if you use them properly, the answer is not one of the choices, so...)
C is the one you want.
¿Porque es importante el cálculo del Numero de Reynolds en Mecánica de fluidos y en Termodinámica?
Answer:
The Reynolds number determines what type of regime is laminar or turbulent in a flow pattern.
Explanation:
The Reynolds number determines what type of regime is laminar or turbulent in a flow pattern.
In the laminar regime R_D <2300 the flow is ordered and has an envelope predicted by the expressions
In the turbulent regime R_D> 2900 the flow has vortices and is extremely irregular
in the intermediate values it is in a transition regime
There are two sets of resistors joined in series in a circuit. Set 1 has two resistors of 10Ω and 40Ω in parallel combination. Set 2 has three resistors of 20 Ω, 30 Ω and 60 Ω in parallel combination. A potential difference of 12 V is applied across the combination.
[tex]\huge\boxed{\fcolorbox{black}{red}{ QUESTION}}[/tex]
There are two sets of resistors joined in series in a circuit. Set 1 has two resistors of 10Ω and 40Ω in parallel combination. Set 2 has three resistors of 20 Ω, 30 Ω and 60 Ω in parallel combination. A potential difference of 12 V is applied across the combination.
[tex] \orange{\underline{\huge{\bold{\textit{\green{\bf{GIVEN}}}}}}}[/tex]
Two set of Parallel resistors
Contains two resistors of --> 10Ω and 40Ω
Contains three resistors of --> 20 Ω, 30 Ω and 60Ω
Potential Difference Of 12 V
[tex]{\bold{\orange {To \: Find }}}[/tex]
Draw a circuit diagram to represent this arrangement Calculate
(a) the total resistance and
(b) the total current flowing in the circuit.
[tex] \huge\mathbb{\red A \pink{N}\purple{S} \blue{W} \orange{ER}}[/tex]
FOR DIAGRAM REFER ATTACHMENT!
[tex]{\bold{\green{\star{\red {Part \: 1:- The \: Total \: Resistance }}}}}[/tex]
First we calculate the total resistance of each parallel combination:-
FIRST SET Contains two resistors of 10Ω and 40Ω
so total resistance-->
[tex] \frac{1}{Rs1} = \frac{1}{R1} + \frac{1}{R2} \\ \\ \frac{1}{Rs1} = \frac{R1 + R2}{R1R2} \\ \\ \frac{1}{Rs1} = \frac{10 + 40}{400} \\ \\ \frac{1}{Rs1} = \frac{50}{400} \\ \\ \frac{1}{Rs1} = \frac{1}{8} \\ \\ Rs1 = 8 Ω[/tex]
SECOND SET Contains three resistors of 20 Ω, 30 Ω and 60Ω
so total resistance-->
[tex] \frac{1}{Rs2} = \frac{1}{R1} + \frac{1}{R2} + \frac{1}{R3} \\ \\ \frac{1}{Rs2} = \frac{R1 + R2 +R3}{R1R2R3} \\ \\ \frac{1}{Rs2} = \frac{3+ 2 + 1}{60} \\ \\ \frac{1}{Rs2} = \frac{6}{60} \\ \\ \frac{1}{Rs2} = \frac{1}{10} \\ \\ Rs2 = 10Ω[/tex]
Now by having Total Resistance of Set one and set two we can add them by series formula.
[tex]R = Rs1 + Rs2 \\ R = 8 + 10 = 18 \: Ω[/tex]
[tex]{\bold{\green{\star{\orange{Part \: 2:- The \: Total \: Current \: Flowing \: In \: The \: Circuit. }}}}}[/tex]
Total Resistance of the circuit = 18 Ω
Potential Difference Of the circuit = 12 V
So Total current-->
[tex] V = IR \\ 12 = 18 \times I \\ \\ I = 0.66 \: A[/tex]
the magnificat of image produced by a concave lens is always less than 1. why?
Answer: Concave lens makes the virtual image. So the image distance turns to be negative which also cause the magnification to be negative.
order the phrases
Using the phrases in the box above, fill in the blank below to put the phrases in the correct order (# 11 - 14) Follow the arrows!
if a statement is true, select true. if it's false, select false.
3 is false 2 is true and the rest true
Answer;
True, False, False, True, True
1. A person walks 50 meters north, and then travels 150 meters to the south. What is the total distance they travelled? What is their displacement from their starting position?
Please help ASAP
Answer:
Total: 200 meters, Displacement: 100 meters South
Explanation:
First, add up the meters traveled to get the total distance.
50m + 150m = 200m
Lastly, displacement is the shortest distance from the initial position to the final position. The person first walked 50 meters north but then traveled 150 meters south. Therefore, their displacement was 100 meters south.
50m - 150m = -100m
(Note: Directions are vectors. North and East are positive vectors while South and West are negative)
.
A sample of an ideal gas is contained at initial volume 34 L, temperature 450 K, and pressure 7.7 × 104 Pa. It then is allowed to expand to a volume of 40 L. To calculate the work involved in the expansion, which additional information, if any, must be known about the gas? Assume that known information includes the values of physical constants, such as the ideal-gas constant R.
A.the final pressure of the gas
B.The path of the change from initial to final conditions
C. the final temperature of the gas
Answer:
it have to be a
Explanation:
Which organism is structurally similar to this organism
Answer:
The correct answer is "Common Ancestry." Scientists notice structural similarities between fossils of a land animal and an aquatic organism. They know the similarities are not a result of the two organisms having to adapt to similar environments. The similarities are brought by the common ancestry of the two organisms.
Read more on Brainly - https://brainly.com/sf/question/1115688
Answer: middle one that looks like a bird
Explanation:
describe one example of light being refracted in the living room
Answer:
television
Explanation:
a television refracts light (the light bounces off of the screen
Answer:
Suppose you have a glass slab as a paper weight, if you keep it on the paper, dont you see something strange? The paper becomes elevated in the glase slab. Everyone sees a waterbottle or glass everyday, while seeing through it, does everything seem normal? Nope. That's refraction.
Explanation:
You must have seen a prism, right? It makes light split into the visible electromagnetic spectrum.
2.
A charge particle is moved through a potential difference of 154.5 V and experiences a
change of electric potential energy of 4.26 x 10-8 J. What is the charge of the particle?
Answer:
2.76×10⁻¹⁰ C
Explanation:
Applying,
V = W/q................... Equation 1
Where V = Electric Potential, E = Electric potential energy, q = charge.
make q the subject of the equation
q = W/V................ Equation 2
From the question,
Given: W = 4.26×10⁻⁸ J, V = 154.5 V
Substitute these values into equation 2
q = 4.26×10⁻⁸/154.5
q = 2.76×10⁻¹⁰ C
What is the total resistance of a 6 ohm and a 8 ohm resistor connected in series?
(1 Point)
Answer:
Total Resistance in circuit is Fourteen Ohms (14 Ω).
Explanation:
How do we know, if the resistors are connected in series, the total resistance is the sum of all the resistors.
(Important: The total resistance can only be added just when the resistors are connected in series)
Then, total resistance (TR ) is the sum of all resistors (T1 + T2, in this case)
TR = T1 + T2
According to problem data, we have:
TR = 8 Ω + 6 Ω
TR = 14 Ω
║Sincerely, ChizuruChan║
how does Newton's law of motion describe when and how objects move?
Answer:
Newton's laws of motion relate an object's motion to the forces acting on it.Newton's first law states that every object will remain at rest or in uniform motion in a straight line unless compelled to change its state by the action of an external force.
Explanation:
What is an impulse? (select all that apply)
J=Ft
change in momentum
V=m/a
a rash decision
Answer:
change in momentum
Explanation:
using newton's second law,
F = m ( v - u ) / t....
Ft = mv - mu
impulse is either Ft ( product of force applied and the time taken for its action )
or impulse is mv - mu ( change in momentum )
I have 130 liters of gas in a piston at a temperature of 250K. If I cool the gas to 163K, what will the volume of the gas be? Round to the nearest whole number.
Answer:
84,76lllll
Explanation:
V1/T1=V2/T2,oke
Which element is found in group 16 and period 5
Answer:
Po (Polonium)
Explanation:
A spring extends by 10cm when a mass of 100g is attached to it. What is the spring constant?
Answer:
10N/m
Explanation:
Using F=kx
F=mg
k=mg/x
k=0.1*10/0.1 (kg*m/s^2)/m
10N/m
Hãy nêu sự tương tự giữa công của lực điện trong trường hợp này với công của trọng lực.
Answer:
tốt ý bạn là gì?
Explanation:
How to write about Bar graph in english
Answer:
A bar chart is orientated horizontally, whereas a column chart is arranged vertically. Sometimes “bar chart” refers to both forms. These types of charts are usually used for comparison purposes (unlike line charts, which describe change).
If each metal is hit with light at a minimum wavelength, can I vary the intensity of the light to start emitting electrons?
It is true that the metal will begin to emit electrons at varied speeds depending on the intensity of the light when it is struck at a minimal wavelength.
What is meant by wavelength?When a waveform signal is propagated in space or over a wire, the wavelength is the separation between two identical locations (adjacent crests) in the adjacent cycles.
If you are employing light with a high enough frequency, the number of electrons ejected grows as the light source's brightness rises.
The velocity of the expelled electrons increases as the frequency is raised above the threshold.
Thus, the metal will begin to emit electrons at varied speeds depending on the intensity of the light when it is struck at a minimal wavelength.
To learn more about Wavelength, refer to the below link:
https://brainly.com/question/1263539
# SPJ2