A machine takes 0.5 seconds to move a brick 1 meter and put 100 Joules of energy into it. (hint: Power is the amount of energy transferred or converted per unit time. Or we say power is work done per unit time. LaTeX: P\:=\:\frac{W}{t}P = W t) This machine would expend more power in this action if it:

Answer:

λ₀ = 2 d n

Explanation:

A soap film is a layer where the lus is reflected on the surface and on the inside of the film, these two reflected rays can interfere with each other either constructively or destructively.

Let's analyze the general conditions of this interference,

* When the ray of light reaches the surface of the film it is reflected, as the index of refraction of the air is less than the index of the film, the reflected ray has a phase change of 180º

* When the ray penetrates the film, its wavelength changes due to the refractive index of the film.

          λ = λ₀ / n

where lick is the wavelength in the vacuum or air and n index of refraction of the film, in general this interference is observed perpendicular to the film, so the sine veils 1. the expression for constructive interference taking in what previous remains

         2d = (m + ½) λ

the expression for destructive interference remains

         2d = m λ

          2d = m λ₀ / n

When the film is placed on a glass plate whose index of refraction is greater than the index of refraction of the film, in the reflection in the lower part of the film another phase difference of 180º is created, for which we have a difference of total phase of 180 +180 = 360º, which is equivalent to no phase difference, therefore the two previous equations are interchanged.

Therefore where we had destructive interference now a cosntructive interference happens we can see the reflected light.

Find us the wavelength that this constructive interference creates

           2d n = m λ₀

           λ₀ = 2 d n / m

To find the minimum wavelength, suppose we observe the first interference pattern m = 1

         λ₀ = 2 d n

where d is the thickness of the film and n the index of refraction of the same

Answer:

Explanation:

For entropy change the formula is

ΔS = ΔQ / T

ΔQ = Δ H

ΔS = Δ H / T

Given

Δ H = + 162.8 kJ

We can take equilibrium temperature as average temperature of the whole process

So, T = 273 + 87 = 360 K

ΔS = Δ H / T

=  162.8 kJ  / 360

= +  0.508 kJ / K .

When the magnitude of the heat transfer for the process is 162.8 kJ, Then the entropy change for the mixing process, in kJ/K is = + 0.508 kJ / K

For The entropy change, the formula is

Then ΔS = ΔQ / T

After that ΔQ = Δ H

Then ΔS = Δ H / T

Given as per question are:

Then Δ H = + 162.8 kJ

Now We can take equilibrium temperature as average temperature of the whole process are:

So, T is = 273 + 87 = 360 K

Then ΔS = Δ H / T

After that = 162.8 kJ / 360

Therefore, = + 0.508 kJ / K.

Find more information about Entropy change here:

https://brainly.com/question/17241209

The amount of lighting on a surface drops to (1/4) of the initial illumination when the distance between a light source and the surface it falls on is doubled.

The amount of light or luminous flux that falls on a surface is known as illumination. It is expressed as lux or lumens per square meter.

The square of the distance has an inverse relationship with the light intensity;

[tex]\rm I = \frac{1}{r^2}[/tex]

Where,

I is the light intensity

r is the distance

Let r is the distance and I is the sound intensity for case 2;

r' = 2r

[tex]\rm I' = \frac{1}{(2r)^2} \\\\ I' = \frac{1}{4r^2} \\\\ I' = \frac{I}{4}[/tex]

When we double the distance between a source of light and the surface on which it falls, the amount of illumination on the surface decreases to(1/2) of the original illumination.

Hence the value of the fraction is 1/4.

To learn more about the illumination refer;

https://brainly.com/question/20160684

#SPJ2

Explanation:

It is given that,

Object distance from the mirror, u = -30 cm

Focal length of the mirror, f = +15 cm

Size of the object, h = 7.5 cm

We need to find the image distance and the size of the image.

Mirror's formula, [tex]\dfrac{1}{v}+\dfrac{1}{u}=\dfrac{1}{f}[/tex]

v is image distance

[tex]\dfrac{1}{v}=\dfrac{1}{f}-\dfrac{1}{u}\\\\\dfrac{1}{v}=\dfrac{1}{(15)}-\dfrac{1}{(-30)}\\\\v=10\ cm[/tex]

Let h' is the size of the image. So,

[tex]\dfrac{h'}{h}=\dfrac{-v}{u}\\\\h'=\dfrac{-vh}{u}\\\\h'=\dfrac{-10\times 7.5}{-30}\\\\h'=2.5\ cm[/tex]

So, the image is located at a distance of 10 cm and the size of the image is 2.5 cm.

Answer:

Flexibility Increases

Pre-breathe time decreases

Mass of suit decreases.

Explanation:

Spacesuits are designed for space shuttles when a person goes to explore the galaxy. The spacesuits shuttle era are pressurized at 4.3 pounds per inch. The gas in the suit is 100% of oxygen and there is more oxygen to breathe when the altitude of 10,000 is reached. This will decrease the breathing time and mass of suit.

Answer:

Package's vertical displacement(s) = 22.12 meter

Explanation:

Given:

Speed of plane = 120 m/s

Total distance = 255 m

Find:

Package's vertical displacement(s)

Computation:

Time taken = Distance / Speed

Time taken = Total distance / Speed of plane

Time taken = 255 / 120

Time taken = 2.125 s

Acceleration due to gravity(g) = 9.8 m/s²

Initial velocity (u) = 0

So,

Package's vertical displacement(s) = ut + (1/2)gt²

Package's vertical displacement(s) = (0)(2.125) + (1/2)(9.8)(2.125)²

Package's vertical displacement(s) = 22.12 meter

Answer: -22.1

Explanation:

I just did the Khan Academy and that was the answer, not the one provided by that one person. :)))

ANSWER:

0.4081%

Explanation:

Difference=24.6-24.5=0.1

Relative error = 0.1/24.5*100=0.4081%

Relative error is equal to the = difference between both the values/The true value *100

Answer:

A car driving in a straight line 20 m/s

Explanation:

ayepecks silly

Answer:

According to super hero logic , nothing will happen to him.

But according to science , yes he will get current shock but good news is that he wouldn't get elected until he is in contact with the wires.

He may / may not be affected but his suit will be damaged for sure as it is made of metal.

HOPE THIS HLEP AND PLSSSSS MARK AS BRAINLIEST AND THNXX :)

Answer:

1. Concave mirror.

2. 4.17 m or 417 cm.

Explanation:

The following data were obtained from the question:

Object distance (u) = 5 m

Magnification (M) = 5

Focal length (f) =..?

1. Identification of the mirror.

To determine whether or not the mirror is concave or convex, we must first of all calculate the image distance.

This can be obtained as follow:

Object distance (u) = 5 m

Magnification (M) = 5

Image distance (v) =.?

Magnification (M) = image distance (v) /object distance (u).

M = v/u

5 = v/5

Cross multiply

v = 5 x 5

v = 25 m

Since the image distance obtained is positive, the mirror is said to be a concave mirror.

2. Determination of the focal length of the mirro.

This can be obtained as follow:

Object distance (u) = 5 m

Image distance (v) = 25 m

Focal length (f) =...?

1/f = 1/v + 1/u

1/f = 1/25 + 1/5

1/f = 0.04 + 0.2

1/f = 0.24

Cross multiply

f x 0.24 = 1

Divide both side by 0.24

f = 1/0.24

f = 4.17 m

Converting the focal length of cm, we have:

1 m = 100 cm

Therefore, 4.17 m = 4.17 x 100 = 417 cm

Therefore, the focal length of the mirror is 4.17 or 417 cm.

Answer;

Motion: A body is said to be in motion if it changes its position with respect to its surroundings.

Explanation:

Rest and motion are the relative terms because they depend on the observer's frame of reference. So if two different observers are not at rest with respect to each other, then they too get different results when they observe the motion or rest of a body .

one example for each. Rest: If a body does not change its position with respect to its surroundings, the body is said to be at rest. ... Motion: A body is said to be in motion if it changes its position with respect to its surroundings.

Answer:

θ = 41.8º

Explanation:

This is an internal total reflection exercise, the equation that describes this process is

         sin θ = n₂ / n₁

where n₂ is the index of the incident medium and n₁ the other medium must be met n₁> n₂

        θ = sin⁻¹ n₂ / n₁

let's calculate

       θ = sin⁻¹ (1.00 / 1.50)

       θ = 41.8º

Answer:

1) a    α,  m   I,  W=F.d    W =τ . θ,

2)  a = v²/r

Explanation:

1) The amounts of rotational and translational motion are related

acceleration is

        a = d²x / dt²

    linear displacement is equivalent to angular rotation, therefore angular acceleration is

      α = d²θ / dt²

force in linear motion is equivalent to moment in endowment motion

       F = m a

       τ = I α

the mass is the inertia of the translation, in rotational motion the moment of inertia is the rotational inertia

          I = m r²

Work is defined by W = F. d

in rotation it is defined by W = τ . θ

The linear momentum is p = mv

the angular momentum L = I w

momentum the linear motion is I = F dt

in the rotation it is I = τ dt

2) The velocity is a vector therefore it has modulus and direction, linear acceleration changes the modulus of velocity, whereas circular motion changes the direction (the other element of the vector).

      [tex]a_{c}[/tex]Ac = v²/r

Explanation:

Given,

I = 5 A

V = 240 V

T = 25 mins = 1500 sec

Now,

Energy dissipated = IVT= 5×240×1500 = 1800000 J

Answer:

pressure=force/area

Answer:

The magnitude and direction of the force per unit length of one wire on the other is 2 x 10⁻⁵ N/m, attractive force.

Explanation:

Given;

distance between the two parallel wires, r = 10 cm = 0.1 m

current in the first wire, I₁ = 2A

current in the second wire, I₂ = 5 A

The force per unit length on each wire can be calculated as;

[tex]\frac{F}{L} = \frac{\mu_oI_1I_2}{2\pi r}[/tex]

where;

μ₀ is permeability of free space = 4π x 10⁻⁷ m/A

[tex]\frac{F}{L} = \frac{\mu_oI_1I_2}{2\pi r} \\\\\frac{F}{L} = \frac{4\pi*10^{-7}*2*5}{2\pi *0.1} \\\\\frac{F}{L} = 2 *10^{-5} \ N[/tex]/ m

The direction of the force between the two wires is attractive since the current in the two wires are in opposite direction.

Therefore, the magnitude and direction of the force per unit length of one wire on the other is 2 x 10⁻⁵ N/m, attractive force.

Answer:

W =1562.53 N

Explanation:

It is given that,

Radius of the aluminium ball, r = 24 cm = 0.24 m

The density of Aluminium, [tex]d=2698.4\ kg/m^3[/tex]

We need to find the thrust and the force. The mass of the liquid displaced is given by :

[tex]m=dV[/tex]

V is volume

Weight of the displaced liquid

W = mg

[tex]W=dVg[/tex]

So,

[tex]W=dg\times \dfrac{4}{3}\pi r^3\\\\W=2698.4\times 10\times \dfrac{4}{3}\times \pi \times (0.24)^3\\\\W=1562.53\ N[/tex]

So, the thrust and the force is 1562.53 N.

Answer:

The answer is B.

Explanation:

Given that the current (Ampere) in a series circuit is same so we can ignore it. We can assume that the total voltage is 60V and all the 3 resistance are different, 20Ω, 40Ω and 60Ω. So first, we have to find the total resistance by adding :

Total resistance = 20Ω + 40Ω + 60Ω

= 120Ω

Next, we have to find out that 1Ω is equal to how many voltage by dividing :

120Ω = 60V

1Ω = 60V ÷ 120

1Ω = 0.5V

Lastly, we have to calculate the voltage at R1 so we have to multiply by 20 (R1) :

1Ω = 0.5V

20Ω = 0.5V × 20

20Ω = 10V

Answer:

625 cm²

Explanation:

The pressure is the same on both pistons.

F/A = F/A

200 N / 25 cm² = 5000 N / A

A = 625 cm²

Answer:

a commutator

Explanation:

Answer:

88 %

Explanation:

The rate of heat loss by a conducting material of thermal conductivity K, cross-sectional area,A and thickness d with a temperature gradient ΔT is given by

P = KAΔT/d

The total heat lost by the styrofoam wall is P₁ = K₁A₁ΔT₁/d₁ where K₁ =thermal conductivity of styrofoam wall 0.033 W/m-K, A₁ = area of styrofoam wall = 17 m², ΔT₁ = temperature gradient between inside and outside of the wall and d₁ = thickness of styrofoam wall = 0.20 m

The total heat lost by the glass window is P₂ = K₂A₂ΔT₂/d₂ where K₂ =thermal conductivity of glass window pane wall 0.96 W/m-K, A₂ = area of glass window pane = 0.15 m², ΔT₂ = temperature gradient between inside and outside of the window and d₂ = thickness of glass window pane = 7 mm = 0.007 m

The total heat lost is P = P₁ + P₂ = K₁A₁ΔT₁/d₁ + K₂A₂ΔT₂/d₂

Now, since the temperatures of both inside and outside of both window and wall are the same, ΔT₁ = ΔT₂ = ΔT

So, P = K₁A₁ΔT/d₁ + K₂A₂ΔT/d₂

Since P₂ = K₂A₂ΔT₂/d₂ = K₂A₂ΔT/d₂is the heat lost by the window, the fraction of the heat lost by the window from the total heat lost is

P₂/P = K₂A₂ΔT/d₂ ÷ (K₁A₁ΔT/d₁ + K₂A₂ΔT/d₂)

= 1/(K₁A₁ΔT/d₁÷K₂A₂ΔT/d₂ + 1)

= 1/(K₁A₁d₂÷K₂A₂d₁ + 1)

= 1/[(0.033 W/m-K × 17 m² × 0.007 m ÷ 0.96 W/m-K × 0.15 m² × 0.20 m) + 1]

= 1/(0.003927/0.0288 + 1)

= 1/(0.1364 + 1)

= 1/1.1364

= 0.88.

The percentage is thus P₂/P × 100 % = 0.88 × 100 % = 88 %

The percentage of heat lost by window of the total heat is 88 %

Answer: 0.0180701 s

Explanation:

Given the following :

Length of string (L) = 10 m

Weight of string (W) = 0.32 N

Weight attached to lower end = 1kN = 1×10^3

Using the relation:

Time (t) = √ (weight of string * Length) / weight attached to lower end * acceleration due to gravity

g = acceleration due to gravity = 9.8m/s^2

Weight of string = 0.32N

Time(t) = √ (0.32 * 10) / [(1*10^3) * (9.8)]

Time = √3.2 / 9800

= √0.0003265

= 0.0180701s

Answer:

Explanation:

Given,

Force ( f ) = 30 N

Acceleration(a) = 7.6 m/s

Now, Let's find the mass of the ball

Using the Newton's second law of motion:

We get:

[tex]force \: = mass \: \times acceleration[/tex]

plug the value

[tex]30 \: = m \: \times 7.6[/tex]

Use the commutative property to reorder the terms

[tex] 30 = 7.6 \: m[/tex]

Swap the sides of the equation

[tex]7.6m = 30[/tex]

Divide both sides of the equation by 7.6

[tex] \frac{7.6 \: m}{7.6} = \frac{30}{7.6} [/tex]

Calculate

[tex]m = 3.94 \: kg[/tex]

Hope this helps..

Best regards!!

Answer:

[tex]\displaystyle \boxed{\mathrm{3.95 \: kg }}[/tex]

Explanation:

[tex]\mathrm{force \: (N) = mass \: (kg) \times acceleration \: (m/s^2)}[/tex]

[tex]\mathrm{force = 30N}[/tex]

[tex]\mathrm{acceleration = 7.6 \: m/s^2 }[/tex]

[tex]\mathrm{Find \: the \: mass.}[/tex]

[tex]\mathrm{30 = m \times 7.6}[/tex]

[tex]\displaystyle \mathrm{m =\frac{30}{7.6} }[/tex]

[tex]\displaystyle \mathrm{m = 3.947... }[/tex]

Answer:

2.5 kg/m³

Explanation:

Absolute pressure = gauge pressure + atmospheric pressure

P = Pg + Pa

The gauge pressure caused by the weight of a fluid is called the static pressure.  It is equal to the density of the fluid × acceleration due to gravity × depth of the fluid,

Pg = ρgh

Therefore:

P = ρgh + Pa

300 Pa = ρ (10 m/s²) (8.00 m) + 100 Pa

ρ = 2.5 kg/m³

Answer:

Explanation:

We shall apply gas law formula to get the solution .

P₁ V₁ / T₁ = P₂ V₂ / T₂

P₁ = 10⁵ + 18 x 10³ x 9.8  where 10⁵ Pa is atmospheric  pressure at surface

= 1.764 x 10⁵ + 10⁵

= 2.764 x 10⁵

2.764 x 10⁵  x 3 / ( 273 + 9 ) = 10⁵ x V₂ / ( 273 + 22 )

V₂ = 8.67 cm³

Answer:

(a) Error: Other's ; Correction: Others'

(b) Error: to ; Correction: for

(c) Error: with ; Correction: of

(d) Error: prepares ; Correction: prepare

Explanation:

a)  The error is in the word "other's" as the position of apostrophe is wrong, so the correct word will be "others'", it shows plural nouns.

b)  The error is in the word "to", so the correct word will be "for" as for is use to talk about a purpose.

c)  The error is in the word "with"  and the correct word will be "of" as of indicates relationships between other words including things that made of other things.

d)  The error is in the word "preapres" and the correct word will be "prepare".

Answer:

1.01×10^20 molecules of ozone.

Explanation:

Data obtained from the question include:

Volume (V) = 2 L

Temperature (T) = 275 K

Pressure (P) = 1.89×10¯³ atm

Gas constant (R) = 0.0821 atm.L/Kmol

Number of mole (n) of ozone =.?

Using the ideal gas equation, we can obtain the number of mole of ozone as follow:

PV = nRT

1.89×10¯³ x 2 = n x 0.0821 x 275

Divide both side by 0.0821 x 275

n = (1.89×10¯³ x 2) /(0.0821 x 275)

n = 1.67×10¯⁴ mole.

Therefore the number of mole of ozone in 2 L of air is 1.67×10¯⁴ mole.

Finally, we shall determine the number of molecules present in 1.67×10¯⁴ mole of ozone.

This can be obtained as follow:

From Avogadro's hypothesis, 1 mole of any substance contains 6.02×10²³ molecules. This implies that 1 mole of ozone contains 6.02×10²³ molecules.

If 1 mole of ozone contains 6.02×10²³ molecules,

therefore, 1.67×10¯⁴ mole of ozone will contain = 1.67×10¯⁴ x 6.02×10²³ = 1.01×10^20 molecules.

Therefore, 1.01×10^20 molecules of ozone are present in 2 L of air.

Answer:

900 cm/s or 9 m/s.

Explanation:

Data obtained from the question include the following:

Length (L) = 30 cm

frequency (f) = 60 Hz

Velocity (v) =.?

Next, we shall determine the wavelength (λ).

This is illustrated below:

Since the wave have 4 node, the wavelength of the wave will be:

λ = 2L/4

Length (L) = 30 cm

wavelength (λ) =.?

λ = 2L/4

λ = 2×30/4

λ = 60/4

λ = 15 cm

Therefore, the wavelength (λ) is 15 cm

Now, we can obtain the speed of the wave as follow:

wavelength (λ) = 15 cm

frequency (f) = 60 Hz

Velocity (v) =.?

v = λf

v = 15 × 60

v = 900 cm/s

Thus, converting 900 cm/s to m/s

We have:

100 cm/s = 1 m/s

900 cm/s = 900/100 = 9 m/s

Therefore, the speed of the wave is 900 cm/s or 9 m/s.

Explanation:

m = kg. v=m/s. g=m/s^2. h= m

>>1/2mv^2=mgh

>>1/2mv^2=mgh>> kg*(m/s)^2= kg*m/s^2*m

>>1/2mv^2=mgh>> kg*(m/s)^2= kg*m/s^2*m>>kg m^2/s^2=kg m^2/s^2 the fraction 1/2 won't be able to make any changes to to the dimensional expression of energy i.e half of energy is still energy therefore you can neglect the number .

>>kg m^2/s^2=kg m^2/s^2

>>J= J

Explanation:

A theory is a way of explaining an object or event using a set of facts.