a merry-go-round rotates from rest with an angular acceleration of 1.50 rad/s2. 8.67 seconds & 20.4 seconds it take to rotate through (a) the first 4.19 rev and (b) the next 4.19 rev.
To solve this problem, we need to use the equations of rotational motion. The equation we need to use is:
θ = ωi*t + 1/2*α*t^2
where θ is the angle rotated (in radians), ωi is the initial angular velocity (in radians per second), α is the angular acceleration (in radians per second squared), and t is the time (in seconds).
For part (a), we want to find the time it takes to rotate through the first 4.19 rev, which is equivalent to 4.19*2π radians. We know that the merry-go-round starts from rest (ωi = 0) and has an angular acceleration of 1.50 rad/s^2. Substituting these values into the equation above, we get:
4.19*2π = 0*t + 1/2*1.50*t^2
Simplifying, we get:
t = √(4.19*2π / 0.75) = 8.67 seconds
Therefore, it takes 8.67 seconds to rotate through the first 4.19 rev.
For part (b), we want to find the time it takes to rotate through the next 4.19 rev. At this point, the merry-go-round is already rotating with some angular velocity, which we need to find first. Using the equation:
ωf = ωi + α*t
where ωf is the final angular velocity, we get:
ωf = 0 + 1.50*8.67 = 13.00 rad/s
Now we can use the same equation as before to find the time it takes to rotate through the next 4.19 rev, but with ωi = 13.00 rad/s:
4.19*2π = 13.00*t + 1/2*1.50*t^2
Simplifying, we get a quadratic equation:
0.75t^2 + 13.00t - 26.17π = 0
Using the quadratic formula, we get:
t = (-13.00 ± √(13.00^2 + 4*0.75*26.17π)) / 1.50
t ≈ 20.4 seconds or t ≈ -34.4 seconds
We can discard the negative solution since time cannot be negative. Therefore, it takes approximately 20.4 seconds to rotate through the next 4.19 rev.
So, the answers are:
(a) 8.67 seconds
(b) 20.4 seconds
Learn more about angular acceleration here:
https://brainly.com/question/29428475
#SPJ11
a scale that allows a respondent to express relative magnitude between the answers to a question and arranges responses in a hierarchical pattern, but does not allow researchers to determine absolute difference between responses, is called a(n)
The scale that allows a respondent to express relative magnitude between the answers to a question and arranges responses in a hierarchical pattern, but does not allow researchers to determine absolute difference between responses, is called an ordinal scale.
An ordinal scale is used in research to measure the rank order of items or attributes, where the differences between them cannot be precisely quantified. The responses are ordered based on their perceived magnitude, but the actual distance between them is unknown.
Ordinal scales can be analyzed using non-parametric statistical tests such as the chi-square test or the Mann-Whitney U test, which do not assume that the data is normally distributed or that the intervals between responses are equal.
To learn more about magnitude follow the link:
https://brainly.com/question/14452091
#SPJ4
The complete question is:
A scale that allows a respondent to express relative magnitude between the answers to a question and arranges responses in a hierarchical pattern, but does not allow researchers to determine absolute difference between responses, is called a(n) ____________
The surface of which jovian moon most resembles the pack ice of the Arctic Ocean? A) Amalthea B) Io C) Europa D) Ganymede E) Callisto.
if an object were to suddenly shrink and decrease its moment of inertia by a factor of 3, what is the difference in energy between the final and initial rotational kinetic energies?
The difference in energy between the final and initial rotational kinetic energies is -(2/3) times the initial rotational kinetic energy.
The rotational kinetic energy of an object is given by the formula:
[tex]K_rot = \frac{1}{2} * I * w^{2}[/tex]
where K_rot is the rotational kinetic energy, I am the moment of inertia, and ω is the angular velocity.
If the moment of inertia of an object decreases by a factor of 3, then the rotational kinetic energy will decrease by a factor of 3 as well.
Let K1 be the initial rotational kinetic energy of the object, and K2 be the final rotational kinetic energy of the object. Then, we can write:
K2 = (1/3) * K1
The difference in energy between the final and initial rotational kinetic energies is:
ΔK = K2 - K1
ΔK = (1/3) * K1 - K1
ΔK = [tex]-(2/3)*k1[/tex]
To know more about rotating kinetic energy:
https://brainly.com/question/30107920
#SPJ4
the speed of sound in air is 332 m/s. humans have sensitivity to sound frequencies from 20 hz to 20,000 hz. a. what is the longest sound wavelength we can hear? (5 pts) b. what is the shortest sound wavelength we can hear? (5 pts)
The longest sound wavelength we can hear is 16.6 m while the shortest sound wavelength we can hear is 0.0166 m.
We can use the formula for the speed of sound to find the longest and shortest sound wavelengths humans can hear:
speed of sound = frequency × wavelength
Let's first solve for the longest wavelength (a):
a. Longest wavelength = speed of sound / lowest frequency
Longest wavelength = 332 m/s / 20 Hz
Longest wavelength = 16.6 m
Now, let's solve for the shortest wavelength (b):
b. Shortest wavelength = speed of sound / highest frequency
Shortest wavelength = 332 m/s / 20,000 Hz
Shortest wavelength = 0.0166 m (or 1.66 cm)
So, the longest sound wavelength humans can hear is 16.6 meters and the shortest sound wavelength we can hear is 0.0166 meters (1.66 centimeters).
More on wavelength: https://brainly.com/question/9668457
#SPJ11
the geocentric model of the universe that was widely accepted in scientific and religious circles until the 16th century was that of
The geocentric model of the universe that was widely accepted in scientific and religious circles until the 16th century was that of Ptolemy, also known as the Ptolemaic system.
The geocentric model of the universe, widely accepted in scientific and religious circles until the 16th century, was based on the idea that Earth was at the center of the cosmos.
This model, also known as the Ptolemaic system, was developed by the ancient Greek astronomer Claudius Ptolemy in the 2nd century AD. According to this model, all celestial objects, including the Sun, Moon, and stars, revolved around the Earth in circular or epicyclical paths.
The geocentric model was dominant for over a thousand years due to its alignment with religious beliefs and its ability to explain astronomical observations.
However, the 16th-century work of Nicolaus Copernicus and later astronomers led to the acceptance of the heliocentric model, which placed the Sun at the center of the solar system and was a more accurate representation of the cosmos.
To learn more about : geocentric
https://brainly.com/question/1507151
#SPJ11
A 52 V battery powers a pair of 36 resistance resistors connected in series. What is the current flowing through the system?
Answer:
Total Voltage V=36*2Ω = 72Ω
We can use the formula V=IR
V=voltage
I=current
R=resistance
V=IR
I= 52/72
I=13/18
I=0.722AWhat happens when thermal energy is applied to a substance q
When thermal energy is applied to a substance, the particles in the substance start to vibrate more rapidly, and the average kinetic energy of the particles increases.
What happens when thermal energy is applies to a substanceAs a result, the temperature of the substance increases. The amount of thermal energy required to increase the temperature of the substance by a certain amount is called the specific heat capacity of the substance.
The way the substance responds to the applied thermal energy also depends on its physical properties, such as its mass, density, and thermal conductivity. For example, a substance with a high thermal conductivity will transfer heat more rapidly to its surroundings, while a substance with a low thermal conductivity will retain heat more effectively.
If the applied thermal energy is sufficient, the substance may undergo a phase change, such as melting or boiling, as the increased kinetic energy overcomes the intermolecular forces holding the particles together.
Learn more about thermal energy at
https://brainly.com/question/19666326
#SPJ1
in a study of the photoelectric effect, a researcher shines low-intensity visible light with a wavelength of 650 nm on a sample of metal. she notices that no photoelectrons are produced. what would happen if she were to increase the intensity of the light by a factor of 10?:
Increasing the intensity of the light by a factor of 10 would increase the number of photoelectrons produced.
The photoelectric effect is a phenomenon in which electrons are emitted from a material when it absorbs electromagnetic radiation, such as light. The energy of the radiation must be greater than the work function of the material for electrons to be emitted.
Increasing the intensity of the light increases the number of photons striking the surface of the metal, which increases the likelihood of electrons being emitted. Therefore, increasing the intensity of the light by a factor of 10 would result in the emission of photoelectrons.
To learn more about photoelectrons, here
https://brainly.com/question/16772624
#SPJ4
if the wavelength of a wave in a particular medium is tripled, what will happen to the frequency of the wave?
Answer:
V = λ * ν speed of wave in medium
We know the speed of a particular wave in a medium is constant.
ν = V / λ
If λ is increased by 3 then the frequency ν will be reduced by a factor of three to keep the speed constant.
ν' = ν / 3
true or false an electric current produces a magnetic field and a magnetic field can be used generate electricity
is it ok to keep my ac running and just stop the car's engine to save gas and keep cool while waiting for my husband?
It is not recommended to keep the AC running while the engine is off, as this can drain the car battery and may lead to mechanical issues in the long run. It is better to turn off the AC and open the windows or step out of the car to cool off while waiting for your husband.
Idling the engine for extended periods of time can also waste gas and contribute to air pollution. When you stop your car's engine, the air conditioning (AC) system will also stop working, as it requires the engine to be running to function properly. To save gas and keep cool while waiting for your husband, you may consider:
1. Turn off your car's engine to save gas.
2. Open the windows slightly to allow for airflow.
3. Use a portable battery-operated fan to keep yourself cool.
4. Park your car in a shaded area, if possible, to reduce heat buildup inside the vehicle.
5. Wear light, breathable clothing to stay comfortable in warmer temperatures.
Remember that running the AC without the engine is not possible, so it's essential to find alternative ways to stay cool while conserving fuel.
More on car engine: https://brainly.com/question/29980491
#SPJ11
question 34 pts how do ambient sounds differ from sound effects?how are foley sounds different from sound effects?
The differences between ambient sounds, sound effects, and Foley sounds.
Ambient sounds, also known as background sounds or atmospheric sounds, are the continuous, subtle noises that help create a sense of atmosphere or location in a scene. They differ from sound effects in that sound effects are distinct, purposeful sounds added to emphasize specific actions or events in a scene.
Foley sounds, on the other hand, are a type of sound effect created manually by a Foley artist to match and enhance the actions happening on-screen. They are different from regular sound effects because they are typically recorded live in a studio using various objects and materials to create realistic, synchronized sounds for actions such as footsteps, clothing rustles, and object handling.
In summary:
1. Ambient sounds create a sense of atmosphere or location and are continuous and subtle.
2. Sound effects are distinct, purposeful sounds added to emphasize specific actions or events.
3. Foley sounds are a type of sound effect created manually by a Foley artist to match on-screen actions.
To know more about ambient sounds, sound effects, and Foley sounds:
https://brainly.com/question/16519187
#SPJ11
on the centered zipper, what is the only part of the work that is done on the outside of the garment?
The only part of the work that is done on the outside of the garment is the basting or pinning of the zipper tape to the fabric.
The rest of the work is done on the inside of the garment. The zipper teeth are inserted between the layers of the fabric and the seam is sewn in place. The seam is then pressed open and the zipper is opened up to expose the teeth.
The zipper tape is then folded back and stitched in place, creating a clean finish on the inside of the garment. The final step is to topstitch the zipper on the outside of the garment, which reinforces the zipper and adds a decorative touch.
Overall, the centered zipper is a popular and versatile choice for many types of garments and can be easily customized to suit individual preferences.
To learn more about : garment
https://brainly.com/question/28264851
#SPJ11
what is an expression for x1(t) , the position of mass i as a function of time? assume that the position is measured in meters and time is measured in seconds.
The expression for x1(t) , the position of mass i as a function of time, is x1(t) = x1_0 + v1_0 * t + 0.5 * a1 * t²
To find an expression for x1(t), the position of mass 1 as a function of time, we need to consider the following terms:
1. Initial position (x1_0): The position of mass 1 at time t=0.
2. Initial velocity (v1_0): The velocity of mass 1 at time t=0.
3. Acceleration (a1): The constant acceleration acting on mass 1, if applicable.
Now, we can use the general equation for the position of an object as a function of time:
x1(t) = x1_0 + v1_0 * t + 0.5 * a1 * t²
Where x1(t) is the position of mass 1 at time t, x1_0 is the initial position, v1_0 is the initial velocity, a1 is the acceleration, and t is the time in seconds.
More on position/time: https://brainly.com/question/29154471
#SPJ11
the electric motor of a model train accelerates the train from rest to 0.720m/s in 22.0milliseconds (ms). the total mass of the train is 875g. Find the average power delivered to the train during its acceleration.
To find the average power delivered to the train during its acceleration, we need to use the formula:
Power = Work / Time
First, we need to find the work done on the train during its acceleration. We can use the formula:
Work = Force x distance
The force on the train is equal to its mass times its acceleration:
Force = Mass x Acceleration
Using the given values, we get:
Force = 0.875 kg x (0.720 m/s^2) = 0.63 N
The distance the train travels during its acceleration can be found using the formula:
Distance = (1/2) x Acceleration x Time^2
Plugging in the given values, we get:
Distance = (1/2) x 0.720 m/s^2 x (22.0 x 10^-3 s)^2 = 0.17 m
So the work done on the train during its acceleration is:
Work = 0.63 N x 0.17 m = 0.1071 J
Now we can plug this value into the formula for power:
Power = Work / Time
The time given is 22.0 milliseconds, which is 0.0220 seconds:
Power = 0.1071 J / 0.0220 s = 4.87 W
Therefore, the average power delivered to the train during its acceleration is 4.87 watts.
To know more about acceleration :
https://brainly.com/question/29135987
#SPJ11
look again at the visible-light view of m82. what is the source of the white and blue light that dominates the image?
In the visible-light view of M82, the source of the white and blue light that dominates the image is mainly due to the presence of young, massive stars. These stars emit high amounts of energy, which results in a strong blue and white glow.
The white and blue light in the visible-light view of M82 is primarily coming from young, hot, massive stars that are forming in the galaxy's intense starburst regions. These stars emit large amounts of ultraviolet radiation, which ionizes the surrounding gas and causes it to glow brightly in visible light. Additionally, some of the blue light may be due to scattered starlight off of dust particles in the galaxy's disk.
The blue light comes from the hot, young stars, while the white light is a combination of light emitted by various types of stars within the galaxy. The high star formation rate in M82 contributes to the abundance of these bright stars and the overall appearance of the galaxy.
To know more about ultraviolet radiation:
https://brainly.com/question/30547511
#SPJ11
A system consists of two charges,
and 109. The force exerted on charge q has a magnitude
of F. Does the force exerted on the charge 10 q have a
magnitude that is greater than, less than or equal to F?
Explain.
The force exerted on the charge 10q has a magnitude that is greater than F.
The force between two charged particles is given by Coulomb's law:
F = k * q1 * q2 / r^2
If we consider the system of two charges, q and 10q, and assume that they are at the same distance from the test charge:
[tex]F = k * q * qtest / r^2[/tex]
where qtest is the charge of the test charge.
Similarly, the force on the test charge due to 10q is given by:
F' = k * (10q) * qtest / r^2
Dividing second equation by the first, we get:
F' / F =[tex](10q * qtest) / (q * qtest)[/tex] = 10
So the force exerted on the charge 10q has a magnitude that is greater than the force exerted on the charge q by a factor of 10.
To know more about Coulomb's law, here
brainly.com/question/506926
#SPJ4
at a given instant in time, an 8-kg rock that has been dropped from a high cliff, experiences an upward force of air resistance of 12 n.note: this is a multi-part question. once an answer is submitted, you will be unable to return to this part.what is the gravitational force on the rock? use g
The gravitational force on the rock is 78.4 Newtons.
At the given instant, the 8-kg rock experiences a gravitational force which can be calculated using the formula:
F_gravity = m * g
where m is the mass of the rock (8 kg) and g is the acceleration due to gravity (approximately 9.8 m/s²).
F_gravity = 8 kg * 9.8 m/s² = 78.4 N
So, the gravitational force on the rock is 78.4 Newtons.his net force causes the rock to accelerate downwards.
The concept of gravitational force is an important one in physics, as it plays a significant role in many natural phenomena. The force of gravity is responsible for the motion of celestial bodies, and it is also a key factor in determining the weight of objects on earth.
Understanding the principles of gravitational force can help us understand the behavior of objects in motion and can also help us develop technologies that are based on these principles.
Know more about gravitational force here:
https://brainly.com/question/72250
#SPJ11
Green laser pointers emit light with a wavelength of 532 nm. Do research on the type of laser used in this type of pointer and describe its operation. Indicate whether the laser is pulsed or continuous.
Pulsed lasers are used in specific applications where short bursts of laser light are needed, such as in laser ranging, lidar, or certain medical procedures.
What is Wavelength?
Wavelength is a term used in physics to describe the distance between two consecutive points of a wave that are in phase, or the distance over which a wave completes one cycle. It is commonly denoted by the Greek letter lambda (λ) and is usually measured in units such as meters (m), nanometers (nm), or angstroms (Å).
Green laser pointers typically use a type of laser known as a diode-pumped solid-state (DPSS) laser to generate laser light at a wavelength of 532 nm, which corresponds to green light in the visible spectrum. DPSS lasers are a type of laser that uses a solid-state crystal or material as the gain medium, which is pumped by a diode laser to achieve laser emission.
Learn more about Wavelength from the given link
https://brainly.com/question/10750459
#SPJ1
how much time will pass when it goes from one-half initial voltage to one-fourth its initial voltage
The time taken is twice the time taken to decrease from the initial voltage to one-half initial voltage.
How much time will pass when it goes from one-half initial voltage to one-fourth its initial voltage?The amount of time it takes for a voltage to decrease from one level to another depends on the characteristics of the system generating the voltage.
Assuming that the voltage is decreasing exponentially over time, the time it takes for a voltage to decrease from one level to another can be calculated using the formula:
[tex]t = -(ln(Vf/Vi))/λ[/tex]
where t is the time taken, Vi is the initial voltage, Vf is the final voltage, and λ is the decay constant of the system generating the voltage.
If the voltage decreases from one-half its initial voltage to one-fourth its initial voltage, then [tex]Vi = 1, Vf = 1/4[/tex], and the voltage has decreased by a factor of 2.
Assuming that the decay is exponential, the time it takes to decrease by a factor of 2 is:
[tex]t = -(ln(1/2))/λ[/tex]
We can simplify this expression using the fact that [tex]ln(1/2) = -ln(2)[/tex], which gives:
[tex]t = ln(2)/λ[/tex]
Similarly, the time it takes to decrease by a factor of 4 is:
[tex]t = -(ln(1/4))/λ = ln(4)/λ = 2ln(2)/λ[/tex]
So, the ratio of the time taken to decrease from one-half initial voltage to one-fourth initial voltage is:
[tex]t(1/4) / t(1/2) = (2ln(2)/λ) / (ln(2)/λ) = 2[/tex]
Therefore, the time taken to decrease from one-half initial voltage to one-fourth initial voltage is twice the time taken to decrease from the initial voltage to one-half initial voltage.
Learn more about voltage
brainly.com/question/29445057
#SPJ11
Show that the form of Newton’s second law is invariant under the Galilean transformation. According to Newton’s second law, the net force acting on an object is equal to the product of its mass and acceleration. Newton’s second law of motion is given by following expression:
Newton’s second law of motion states that the force F acting on an object of mass m produces an acceleration a in the object, and is given by, F = ma. The law s invariant under Galilean transformation.
The Galilean transformation is a set of equations that describe the relationship between two reference frames that are in relative motion with constant velocity. It has no effect on the form of Newton’s second law because it only involves a change of coordinates and time, which do not affect the physical laws.
To see this, consider two reference frames S and S', where S' moves with constant velocity v with respect to S. Let an object of mass m be at rest in S, and let F be the net force acting on it in S. According to Newton’s second law in S, we have:
F = ma
Now, let us apply the Galilean transformation to the equation. The position of the object in S' is given by:
x' = x - vt
where x is the position of the object in S, and t is time. Taking the derivative of x' with respect to t, we get:
v' = dx'/dt
= dx/dt - v
= v - v
= 0
This means that the velocity of the object is the same in both reference frames. Similarly, the acceleration is also the same in both reference frames, since it is the derivative of velocity,
a' = dv'/dt = da/dt = a
Therefore, we can write Newton’s second law in S' as,
F' = ma'
where F' is the net force acting on the object in S'. Substituting a' = a, we get:
F' = ma
which is the same form as in S. Thus, we see that the form of Newton’s second law is invariant under the Galilean transformation.
To know more about Galilean transformation, here
brainly.com/question/29655824
#SPJ4
the rotating plate in your microwave oven is broken. you think nothing of it and put in a plate of american cheese slices to heat up as your lunch. after running the microwave oven for 1 minute you pull out your lunch, only to realize that it has heated up in strips separated by strips of unmelted cheese. the distance between two consecutive unmelted cheese strips is about 4cm. what is the wavelength of the em waves being used by your oven
The electromagnetic waves being used by the microwave oven have a wavelength of approximately 0.08 meters.
Based on the information given, we can estimate the wavelength of the electromagnetic waves being used by the microwave oven using the distance between two consecutive unmelted cheese strips.
The distance between two consecutive unmelted cheese strips is about 4cm, which represents half a wavelength, since the cheese strips correspond to regions where the microwaves are reflecting off the metal walls of the oven. Therefore, the full wavelength of the electromagnetic waves being used by the oven is approximately 2 times 4cm, or 8cm.
Converting this to meters, we get a wavelength of 0.08 meters (since there are 100 centimeters in a meter). Therefore, the electromagnetic waves being used by the microwave oven have a wavelength of approximately 0.08 meters.
Learn more about electromagnetic waves
https://brainly.com/question/3101711
#SPJ4
The diagram below represents a 155-newton box
on a ramp. Applied force F causes the box to
slide from point A to point B.
What is the total amount of gravitational potential
energy gained by the box?
155-newton box going up a ramp. The gravitational potential energy in the universe totals 279J, which is what causes the box to move from point A to point B when force F is applied.
How is gravitational potential energy calculated?The formula for gravitational force is P.E. = mgh, whereby g is the force caused by gravity (9.8 m/s2 at the earth's surface) and h is the elevation in metres. The units for gravitational potential energy are kg m2/s2, which are the same as those for kinetic energy.
Which of the following points has the object's gravitational potential energy at its lowest?The amount of gravitational potential energy an object has depends on how high it is above the surface whenever the height is the smallest. Point B in the given diagram is the lowest point and is closest to the Earth's surface vertically.
To know more about potential energy visit :
https://brainly.com/question/24284560
#SPJ1
After a person has made a change in their life, relapse is common.
A. True
B. False
Answer:
A true
Explanation:
because it is talking about drugs and alcohol
which of the following is a normative statement? a. a bicycle has two wheels. b. you should wear a helmet when cycling. c. the sky is blue. d. electricity follows the path of least resistance. e. a unicycle has five wheels.
The normative statement in this list is b.
Which of the following is a normative statement?The normative statement in this list is b. "You should wear a helmet when cycling." This is because it is expressing a value judgment and prescribing a course of action, rather than simply stating a fact like the other options. The other statements are all descriptive and objective, stating things that are generally true or observable, such as the number of wheels on a bicycle or the color of the sky. The statement about electricity is a scientific principle, but it is still not normative in nature.
Learn more about normative statement
brainly.com/question/15823409
#SPJ11
the fundamental force underlying all chemical reactions is nuclear. centripetal. electrical. gravitational. none of the above choices are correct.
Answer:
Electrical - electric forces between atoms are responsible for reactions between the atoms
Nuclear forces are not directly involved when 2 atoms of Oxygen combine to form a molecule of O2 or an atom of Sodium combines with an atom of Chlorine to form NaCL (table salt)
i need some help with this physics question
The response is C. It has bulk and occupies room. All substance has a volume and takes up space, whether it be a solid, liquid, or gas. It is a basic characteristic of matter. While matter can move from hot to cold and perform work.
What are two unbreakable qualities?A metal-skinned hull, steam propulsion, and a main armament of guns equipped to fire explosive shells are the three qualities that define a fighting ironclad. All of these innovations reached their full maturity with the French Navy's November 24, 1859, launch of the "Gloire," but the US Civil War saw the invention of the ironclad.
What are the qualities of matter's properties?Any attribute that may be measured, such as a substance's mass, volume, length, density, colour, malleability, or melting point Properties of matter include point, hardness, smell, temperature, and more.
To know more matter visit:-
https://brainly.com/question/14987556
#SPJ1
Answer: D
Explanation:
duc 1. Define the term 'element. 2. If you break down each of the following, how many different atoms would you be able to recover? a) Mercury b) Sodium chloride c) Water d) Carbon dioxide e) Oxygen
part a.
An element is described as a pure substance that is composed of only one type of atom. Each element is characterized by a unique atomic number, which corresponds to the number of protons in the nucleus of its atoms.
part b.
a) Mercury - breaking down mercury would yield only mercury atoms.
b) Sodium chloride - Breaking down sodium chloride would yield sodium and chlorine atoms in their respective ratios.
c) Water -Breaking down water would yield hydrogen and oxygen atoms in their respective ratios.
d) Carbon dioxide : Breaking down carbon dioxide would yield carbon and oxygen atoms in their respective ratios.
e) Oxygen - breaking oxygen down would yield only oxygen atoms.
More about Elements?Some facts about elements includes;
Elements found on Earth and Mars are exactly the same.Hydrogen is the most common element found in the universe. Isotopes are atoms of the same element, with different numbers of neutrons.In ancient times the elements referred to fire, earth, water, and air.Learn more about elements at: https://brainly.com/question/20096027
#SPJ1
thermal expansion may cause an equipment or piping system overpressure when the liquid is blocked-in
Thermal expansion is a phenomenon in which materials expand when they are heated and contract when they are cooled. This can be a problem in industrial equipment or piping systems that contain liquids, especially when the liquid is blocked-in and cannot move freely.
When the temperature of the liquid increases due to an external heat source, such as a nearby furnace or the sun, the liquid will expand and cause an increase in pressure within the equipment or piping system. This increase in pressure can lead to overpressure, which can be dangerous and can potentially cause equipment failure or system rupture.
It is important to account for thermal expansion when designing industrial equipment and piping systems to ensure that they can safely withstand the changes in pressure caused by temperature fluctuations.
Learn more about equipment ,
https://brainly.com/question/30230359
#SPJ4
suppose the horns of all cars emitted sound at the same pitch or frequency. what would be the change in the frequency of the horn of a car moving toward ou? away from you?
The frequency of the horn of a car moving towards you would increase, while the frequency of a car moving away from you would decrease due to the Doppler effect.
The frequency of the sound waves an automobile makes will rise as it approaches you. This is due to the sound waves compression as the automobile draws closer to you, which causes them to have a shorter wavelength and a higher frequency. The Doppler effect is the name for this rise in frequency.
On the other hand, when an automobile pulls away from you, the sound waves' frequency will drop because they stretch, leading to a longer wavelength and a lower frequency. As a result, if all vehicles produce sound at the same frequency, you would hear a frequency rise for a vehicle travelling in your direction and a frequency drop for a vehicle driving away from you.
Learn more about the Doppler effect:
https://brainly.com/question/12764207
#SPJ4
If the car is moving towards you, the frequency of the horn will increase,moving away from you, the frequency will decrease
If the horns of all cars emitted sound at the same pitch or frequency, the frequency of the horn of a car moving toward you would appear to increase, as the sound waves are compressed and the wavelength is shortened due to the Doppler effect. Conversely, the frequency of the horn of a car moving away from you would appear to decrease, as the sound waves are stretched and the wavelength is lengthened due to the Doppler effect. This is because the observer perceives a higher frequency when the source is approaching and a lower frequency when the source is moving away.
To learn more about the doppler effect, click on this -
brainly.com/question/15318474
#SPJ11