(a) Outline the principles that determine the assignment of a Biosafety level or number to a GMO product. (4 marks) (b) Give four examples of a real or theoretical GMO for each biosafety level or number from each of the following categories: animals, plants, and microbes. Explain why your example belongs at the biosafety level you have assigned to it. (You can provide two separate examples from any one category).

Answers

Answer 1

(a) Principles that determine the assignment of a Biosafety level to a GMO product are as follows:Level 1: It is safe,Level 2: Microbes that are possibly pathogenic to healthy adults,Level 3: Microbes pose a severe risk of life-threatening disease.

Level 1: It is safe, and the microbes used are not known to cause diseases in healthy adults. There are no specific requirements for laboratory design. Gloves and a lab coat are the only personal protective equipment required.

Level 2: Microbes that are possibly pathogenic to healthy adults but can be treated by available therapies are used. Laboratory design must restrict the entry of unauthorized individuals and require written policies and procedures. Personal protective equipment such as lab coats, gloves, and face shields are required.

Level 3: Microbes that are either indigenous or exotic and pose a risk of life-threatening diseases via inhalation are used. The laboratory must be restricted to authorized persons, must have controlled entry, and must be separated from access points. Negative air pressure in the laboratory, double-entry autoclaves for waste sterilization, and other specific engineering features are required. Respiratory protection is a must.

Level 4: The most dangerous organisms that pose a severe risk of life-threatening disease by inhalation are used. It's almost entirely constructed of stainless steel or other solid surfaces, with zero pores or cracks. A separate building with no outside windows and filtered, double-door entry is required. All employees must don a positive-pressure air-supplied space suit. There should be a separate waste disposal system, and the air in the laboratory should be filtered twice before being released into the environment.

(b) Four examples of a real or theoretical GMO for each biosafety level or number from each of the following categories: Animals, Plants, and Microbes are as follows:

Level 1:Microbes: Bifidobacterium animalis Plant: Nicotiana tabacum Animal: Zebrafish (Danio rerio)

Level 2:Microbes: Lactococcus lactis Plant: Arabidopsis thaliana Animal: Mouse (Mus musculus)

Level 3:Microbes: Mycobacterium tuberculosis Plant: Oryza sativa Animal: Monkey (Macaca mulatta)

Level 4:Microbes: Ebola virus Plant: None Animal: None

The above-listed GMOs belong to specific Biosafety levels because the level is determined by the risk of the organism to the environment or individual. The higher the Biosafety level, the more severe the disease is, which is why Biosafety level 4 requires extremely strict procedures. The assigned Biosafety level is determined by assessing the organism's pathogenicity and virulence, as well as the possibility of infection through ingestion, inhalation, or other methods.

Learn more about Biosafety:

brainly.com/question/30564176

#SPJ11


Related Questions

Which of the following are membranes either totally or partially permeable to? Choose all that apply A. urea B. water C. gases D. small polar molecules E. single amino acids
F. sugars

Answers

The cell membrane maintains homeostasis and regulates the flow of substances in and out of the cell.

Membranes either totally or partially permeable to the following:Urea.Water.Gases.Small polar molecules.Single amino acids. Sugars.

How does the cell membrane work?

Cell membranes play a crucial role in protecting the integrity of cells. They are semi-permeable and allow the cell to maintain a stable internal environment.The cell membrane is a fluid, two-layered structure composed primarily of phospholipids, which are amphipathic molecules.

It has a hydrophilic head and a hydrophobic tail. The heads are exposed to the aqueous extracellular and intracellular fluids, while the tails form a hydrophobic interior.The membrane is selectively permeable, allowing some molecules to pass through while blocking others. Small and uncharged molecules like oxygen, nitrogen, and carbon dioxide, are easily able to pass through the membrane.

Water molecules can pass through the membrane via the process of osmosis. Glucose and amino acids can pass through the membrane with the help of membrane transport proteins.

Thus, the cell membrane maintains homeostasis and regulates the flow of substances in and out of the cell.

To know more about membrane visit:

https://brainly.com/question/19360972

#SPJ11

Which of the following is NOT a broad ecosystem category? a. Low salt content, low biodiversity but minimum seasonality b. Areas of low salt content c. Many fluctuations based on seasonality d. High levels of biodiversity and salt content

Answers

Among the options given, the category that is not a broad ecosystem category is a) Low salt content, low biodiversity but minimum seasonality.

Ecosystem refers to the relationship between living organisms and their physical environment. An ecosystem comprises all living organisms, along with non-living elements, such as water, minerals, and soil, that interact with one another within an environment to produce a stable and complex system.

There are several ecosystem categories that can be distinguished on the basis of factors such as climate, vegetation, geology, and geography.

The following are the broad categories of ecosystem:Terrestrial ecosystem Freshwater ecosystemMarine ecosystem There are various subcategories of ecosystem such as Tundra, Forest, Savannah, Deserts, Grassland, and many more that come under Terrestrial Ecosystem.

To know more about seasonality visit:

https://brainly.com/question/19009677

#SPJ11

7. A small section of bacterial enzyme has the amino acid sequence arginine, threonine, alanine, and isoleucine. The tRNA anticodons for the amino acid sequence shown above is A. GCA UGA CGA UAC B. UCU UGG CGC UAU C. UCG UGU CGU UAG D. GCG UGC CCC UAA

Answers

The answer to the given question is option B. Bacteria are microscopic organisms that have various shapes, sizes, and physiological characteristics. Bacterial enzymes are proteins that catalyze biochemical reactions in bacteria.

The amino acid sequence of bacterial enzymes can be determined using various methods such as X-ray crystallography, nuclear magnetic resonance spectroscopy, and mass spectrometry.The tRNA anticodons for the amino acid sequence shown above is UCU UGG CGC UAU. The tRNA anticodons are complementary to the mRNA codons, and they carry the amino acids to the ribosomes during translation.Main answer in 3 lines: The tRNA anticodons for the amino acid sequence shown above is UCU UGG CGC UAU. The amino acid sequence of bacterial enzymes can be determined using various methods such as X-ray crystallography, nuclear magnetic resonance spectroscopy, and mass spectrometry. Bacterial enzymes are proteins that catalyze biochemical reactions in bacteria.

To learn more about Bacterial enzymes

https://brainly.com/question/13062823

#SPJ11

1. Mention, define and give examples of the three
dietary categories that animals fit in
Define the following: peristalsis, ingesntiand hermaphrodite

Answers

Dietary categories are as follows:1. Herbivores: Animals that consume only plants are called herbivores. The bulk of their food is made up of plants. Elephants, cows, rabbits, and giraffes are examples of herbivores.2. Carnivores: Carnivores are animals that only eat meat. They're also known as predators. Lions, tigers, sharks, and crocodiles are examples of carnivores.3. Omnivores:

Omnivores are animals that eat both plants and animals. Humans, bears, and pigs are examples of omnivores.Peristalsis: It is the contraction and relaxation of muscles that propel food down the digestive tract. The contractions of the smooth muscles are triggered by the autonomic nervous system. The term is used to refer to the involuntary muscular contractions that occur in the gastrointestinal tract, but it can also refer to the contractions of other hollow organs like the uterus and the ureters.Ingestion: It is the process of taking food into the body. It is the first stage of the digestive process in which food enters the mouth and is broken down into smaller pieces by the teeth and tongue.Hermaphrodite: Hermaphroditism refers to organisms that have both male and female reproductive organs. These organisms can reproduce asexually or sexually. Some animals that are hermaphrodites include earthworms, slugs, and snails. In plants, hermaphroditism refers to flowers that have both male and female reproductive organs. An example of a hermaphroditic plant is the tomato plant.

Animals can be classified into three dietary categories which are herbivores, carnivores, and omnivores. Herbivores are animals that consume only plants, carnivores are animals that eat only meat, and omnivores are animals that eat both plants and animals.Peristalsis is a process that occurs in the digestive system that propels food down the digestive tract. It is the involuntary muscular contractions that occur in the gastrointestinal tract and other hollow organs like the uterus and the ureters. Ingestion is the process of taking food into the body. It is the first stage of the digestive process in which food enters the mouth and is broken down into smaller pieces by the teeth and tongue.Hermaphroditism refers to organisms that have both male and female reproductive organs.

To know more about dietary visit:

https://brainly.com/question/32947566

#SPJ11

Pedigrees and Mendelian inheritance
In Labrador retrievers, coat color is controlled by two genes, one that determines whether pigment is deposited in the hair and one that controls the color of the pigment. The first gene has two alleles, one for black pigment and one for brown (chocolate) pigment. The black allele is dominant. The alleles at the second gene determine if the pigment is deposited in the fur of the animal. If the dog has two recessive alleles at this locus, no pigment will be deposited in the fur and the dog will be a yellow lab. If the dog has at least one dominant allele at this locus and at least one black pigment allele, they will be a black lab. If the dog has two brown alleles and at least one dominant allele at the second locus, they will be a chocolate lab.
Take a deep breath. You’ve got this. The information you have in the problem is:
The structure of the pedigree through the naming of individuals (the pedigree is already drawn for you)
How the inheritance of coat color works in Labrador retrievers
The phenotype of the individuals in the pedigree
The steps you need to take to solve it:
Assign phenotypes to every dog Figure out the genotype for the color deposition locus – use D/d to indicate whether the color is deposited/not deposited
Figure out the genotype for the pigment locus – use B/b to indicate Black allele/brown allele
Using the pedigree below, fill in the genotypes and phenotypes in the table following the pedigree for the family of Labrador retrievers. Mom and Dad are indicated for you. If a genotype is indeterminate, use a dash (-). Once you have done that, use that information to answer the questions below.
Family: Leia, the mom, is a black lab. Han, the dad, is a brown lab. Leia’s father is a black lab, and her mother is a black lab, both heterozygous for the color deposition locus and the pigmentation locus. Han’s father is a yellow lab from a homozygous black father and brown mother. Han’s mother is a brown lab from two brown labs that are homozygous for the color deposition gene. Leia and Han have three puppies: one female brown lab named Jaina, one male black lab called Jacen, and one male yellow lab named Ben.

Answers

Phenotypes of all the dogs were identified and genotypes of the color deposition locus and pigmentation locus of each dog were assigned. With the help of this information, the genotypes and phenotypes of Leia and Han’s puppies were found.

Phenotypes of all the dogs were identified and genotypes of the color deposition locus and pigmentation locus of each dog were assigned. In the color deposition locus, D/d was used to indicate whether the color is deposited/not deposited. In the pigmentation locus, B/b was used to indicate Black allele/brown allele. With the help of this information, the genotypes and phenotypes of Leia and Han’s puppies were found. The genotypes and phenotypes of the puppies are as follows:Jaina, the female brown lab: bbD/-Jacen, the male black lab: BbD/-Ben, the male yellow lab: bbdd.

Therefore, the conclusions that can be drawn from the given information are that Leia and Han are heterozygous for the color deposition and pigmentation locus. Their puppies have different genotypes and phenotypes for the color deposition and pigmentation locus. The brown puppy has the genotype bbD/-, black puppy has BbD/-, and the yellow puppy has the genotype bbdd.

To know more about Phenotypes visit:

brainly.com/question/32443055

#SPJ11

In some insect species the males are haploid. What process (meiosis or mitosis) is used to produce gametes in these males?
Wiskott-Aldrich Syndrome (WAS) is an X-linked disorder characterized by low platelet counts, eczema, and recurrent infections that usually kill the child by mid childhood. A woman with one copy of the mutant gene has normal phenotype but a woman with two copies will have WAS. Select all that apply: WAS shows the following
Pleiotropy
Overdominance
Incomplete dominance
Dominance/Recessiveness
Epistasis

Answers

In some insect species, the males are haploid, and mitosis is used to produce gametes in these males. Wiskott-Aldrich Syndrome (WAS) shows Dominance/Recessiveness.

In some insect species, the males are haploid. Mitosis is used to produce gametes in these males. This is because mitosis is the type of cell division that occurs in somatic cells. It results in the production of two identical daughter cells with the same chromosome number as the parent cell. Meiosis, on the other hand, is the type of cell division that occurs in germ cells. It results in the production of four genetically diverse daughter cells with half the chromosome number of the parent cell.Therefore, mitosis is used to produce gametes in male haploid insect species.

.Wiskott-Aldrich Syndrome (WAS) shows the Dominance/Recessiveness. Dominant alleles are those that determine a phenotype in a heterozygous (Aa) or homozygous (AA) state. Recessive alleles determine a phenotype only when homozygous (aa). In the case of WAS, a woman with one copy of the mutant gene has a normal phenotype because the normal gene can mask the effect of the mutant gene. However, a woman with two copies of the mutant gene will have WAS because the mutant gene is now in a homozygous state. Therefore, the mutant allele is recessive to the normal allele.

In some insect species, the males are haploid, and mitosis is used to produce gametes in these males. Wiskott-Aldrich Syndrome (WAS) shows Dominance/Recessiveness.

To know more about Wiskott-Aldrich  syndrome visit:

brainly.com/question/30765213

#SPJ11

Question 47 Not yet graded / 7 pts Part C about the topic of nitrogen. The nucleotides are also nitrogenous. What parts of them are nitrogenous? What are the two classes of these parts? And, what are

Answers

Nitrogenous refers to the presence of nitrogen in a molecule. Nucleotides are also nitrogenous.

Nucleotides have three parts: nitrogenous base, sugar, and phosphate. The nitrogenous base of a nucleotide is nitrogenous.

The two classes of these nitrogenous bases in nucleotides are purines and pyrimidines.

Purines are nitrogenous bases that contain two rings.

Adenine (A) and guanine (G) are examples of purines.

Pyrimidines are nitrogenous bases that contain one ring.

Cytosine (C), thymine (T), and uracil (U) are examples of pyrimidines.

To know more about nitrogenous visit:

https://brainly.com/question/16711904

#SPJ11

Journal Review for: Phylogeny of Gekko from the Northern Philippines, and Description of a New Species from Calayan Island DOI: 10.1670/08-207.1
In terms of the molecular data
1. What type of molecular data was used? Describe the characteristic of the gene region used and how did it contribute to the findings of the study.
2. What algorithms were used in the study and how were they presented? If more than 1 algorithm was used, compare and contrast the results of the algorithms.
In terms of the morphological data
3. Give a brief summary of the pertinent morphological characters that were used in the study. How where they presented?
4. Phylogenetic studies are usually supported by both morphological and molecular data. In the journal assigned, how was the collaboration of morphological and molecular data presented? Did it create conflict or was it able to provide sound inferences?
Separate vs. Combined Analysis
5. Identify the substitution model utilized in the paper.
6. In the phylogenetic tree provided identify the support value presented (PP or BS). Why does it have that particular support value?
7. Did the phylogenetic analysis utilize separate or combined data sets? Explain your answer.

Answers

1. The type of molecular data used in the paper “Phylogeny of Gekko from the Northern Philippines, and Description of a New Species from Calayan Island” is mitochondrial and nuclear genes. The molecular phylogenetic analysis was based on 3469 base pairs of two mitochondrial genes (12S and 16S rRNA) and one nuclear gene (c-mos).

Mitochondrial DNA is generally used in phylogenetic analysis because it is maternally inherited and has a high mutation rate. In contrast, nuclear DNA evolves at a slower rate and is biparentally inherited.
2. In this paper, the maximum parsimony (MP) and Bayesian inference (BI) algorithms were used. MP was presented as a strict consensus tree, and BI was presented as a majority rule consensus tree. MP is a tree-building algorithm that seeks to minimize the total number of evolutionary changes (such as substitutions, insertions, and deletions) required to explain the data. In contrast, BI is a statistical method that estimates the probability of each tree given the data. It is known to be a powerful tool for inferring phylogenies with complex evolutionary models. In this study, the two algorithms produced similar topologies, suggesting that the tree topology is robust.
3. The morphological data used in the study included the number of scales around the midbody, the presence of a preanal pore, the number of precloacal pores, and the length of the fourth toe. These morphological characters were presented as a table that shows the values for each species.
4. In this study, both molecular and morphological data were used to infer the phylogeny of the Gekko species. The phylogenetic tree was based on the combined data set of molecular and morphological data, which was presented as a majority rule consensus tree. The combined analysis provided sound inferences, and there was no conflict between the two datasets.
5. The substitution model utilized in the paper was GTR+I+G. This is a general time reversible model that incorporates the proportion of invariable sites and a gamma distribution of rates across sites.
6. In the phylogenetic tree provided, the support value presented is PP (posterior probability). This particular support value was used because Bayesian inference was used to construct the tree. PP values range from 0 to 1 and indicate the proportion of times that a particular clade is supported by the data.
7. The phylogenetic analysis utilized combined data sets. The authors explained that the combined analysis is a powerful tool that can increase the accuracy and resolution of phylogenetic trees, especially when the datasets are not in conflict with each other.

To know more about Phylogeny visit:

https://brainly.com/question/1426293

#SPJ11

If the diameter of the field rein at (4000) is 3 mm and the number of stomata is 11 with Same magnification. Calculate stomata number / mm?

Answers

Stomata are small pores or openings that occur in the leaves and stem of a plant.  stomata number per millimeter of the leaf is 1.56. This means that there are 1.56 stomata per square millimeter of the leaf.

The number of stomata present on a leaf surface can vary with the species of plant, the age of the plant, the location of the leaf, the environmental conditions, and the time of day. In order to determine the number of stomata per millimeter of a leaf, it is necessary to measure the diameter of the field rein and the number of stomata present in a particular region of the leaf.



Given that the diameter of the field rein is 3 mm and the number of stomata is 11, we can calculate the number of stomata per millimeter of the leaf as follows:

- Calculate the area of the field rein Area = πr² where r = d/2 = 3/2 = 1.5 mm Area = 3.14 x (1.5)² Area = 7.07 mm²
- Calculate the number of stomata per mm² Stomata per mm² = Number of stomata / Area Stomata per mm² = 11 / 7.07 Stomata per mm² = 1.56



Therefore, the stomata number per millimeter of the leaf is 1.56. This means that there are 1.56 stomata per square millimeter of the leaf. The calculation is important because it helps to determine the surface area of the leaf that is available for transpiration and gas exchange. It also provides insight into how a particular plant species adapts to different environmental conditions.

Know more about Stomata here:

https://brainly.com/question/32007448

#SPJ11

When a depolarising graded potential (eg., EPSP) depolarises the neuronal cell membrane to threshold: O ligand-gated Na* channels close rapidly. O None of the above. O ligand-gated Ca*2 channels close rapidly. voltage-gated Ca*2 channels open rapidly. O voltage-gated Na* channels open rapidly.

Answers

When a depolarizing graded potential (e.g., EPSP) depolarizes the neuronal cell membrane to the threshold, voltage-gated Na+ channels open rapidly.  the correct answer is that voltage-gated Na+ channels open rapidly.

The initiation of an action potential, which is the basic unit of neuronal communication, is based on the opening of voltage-gated Na+ channels, allowing an influx of Na+ ions into the cytoplasm. When a depolarizing graded potential exceeds the threshold, a chain reaction occurs, resulting in the opening of voltage-gated Na+ channels and the generation of an action potential that travels down the axon.

Depolarizing graded potentials, also known as excitatory postsynaptic potentials (EPSPs), are generated by the binding of neurotransmitters to ligand-gated ion channels on the postsynaptic membrane. These channels enable the flow of positive ions, such as Na+ or Ca2+, into the cytoplasm, which depolarizes the membrane and brings it closer to the threshold for firing an action potential.

Voltage-gated Ca2+ channels play a key role in the release of neurotransmitters from the presynaptic terminal, but they do not contribute to the generation of action potentials. Similarly, ligand-gated Ca2+ channels are involved in some types of synaptic plasticity, but not in the initiation of action potentials. Therefore, the correct answer is that voltage-gated Na+ channels open rapidly.

To know more about  membrane visit :

https://brainly.com/question/28592241

#SPJ11

2. Explain why ampicillin acts as an functions in bacteria. antibiotic, and the mechanism whereby the ampi gene [2]

Answers

Ampicillin is an antibiotic that acts by inhibiting bacterial cell wall synthesis. It belongs to the class of antibiotics called penicillins and specifically targets the enzymes involved in the construction of the bacterial cell wall.

The mechanism of action of ampicillin involves interfering with the transpeptidation step of peptidoglycan synthesis. Peptidoglycan is a crucial component of the bacterial cell wall responsible for maintaining its structural integrity. It consists of alternating units of N-acetylglucosamine (NAG) and N-acetylmuramic acid (NAM), cross-linked by short peptide chains. Ampicillin works by binding to and inhibiting the transpeptidase enzymes known as penicillin-binding proteins (PBPs). These enzymes are responsible for catalyzing the cross-linking of the peptide chains in peptidoglycan. In summary, ampicillin acts as an antibiotic by inhibiting bacterial cell wall synthesis through the inhibition of transpeptidase enzymes.

learn more about:-Ampicillin   here

https://brainly.com/question/31671227

#SPJ11

A high specific gravity reading means that: 1 pts O the urine is very dilute, containing more water than usual. the solutes in the urine are very concentrated. Check Answer 1 pts The pH of urine can b

Answers

A high specific gravity reading means that the solutes in the urine are very concentrated. The specific gravity of urine is a measure of the density of urine compared to the density of water.

A high specific gravity indicates that the urine contains a high concentration of solutes, such as salts and other waste products that are being eliminated from the body. This means that the kidneys are working efficiently to remove waste products from the blood, and that the body is well-hydrated, as the kidneys are able to extract enough water from the urine to maintain a healthy water balance.

The pH of urine can be influenced by a number of factors, including diet, medications, and certain medical conditions. A high specific gravity reading is not related to the pH of urine. This means that the kidneys are working efficiently to remove waste products from the blood, and that the body is well-hydrated, as the kidneys are able to extract enough water from the urine to maintain a healthy water balance.

To know more about urine visit :

https://brainly.com/question/28405832

#SPJ11

Relate Gibbs free energy to the direction of a reaction in a cell
assisted by enzyme how can a cell control the direction of a
reaction?

Answers

Gibbs free energy is a measure of the amount of energy in a system that is available to do useful work, such as driving a chemical reaction. In the context of a cell, enzymes are proteins that catalyze, or speed up, chemical reactions.

These reactions are essential for cellular processes such as metabolism, energy production, and DNA replication .The direction of a reaction in a cell is determined by the Gibbs free energy change (ΔG) of the reaction. If ΔG is negative, the reaction is exergonic, meaning it releases energy and proceeds spontaneously in the forward direction. If ΔG is positive, the reaction is endergonic, meaning it requires an input of energy and proceeds spontaneously in the reverse direction. However, the direction of a reaction in a cell is not solely determined by the thermodynamics of the reaction.

Enzymes can also influence the direction of a reaction by lowering the activation energy required for the reaction to occur. This can allow a thermodynamically unfavorable reaction to proceed by reducing the energy barrier that the reactants must overcome. To control the direction of a reaction, cells can regulate the activity of enzymes. This can be done by controlling the expression of genes that encode for enzymes or by post-transcriptional or post-translational modifications of the enzymes themselves. Additionally, cells can control the concentration of reactants and products in the cell to shift the equilibrium of the reaction in the desired direction. Overall, the direction of a reaction in a cell is determined by both the thermodynamics of the reaction and the activity of enzymes.

To know more about  chemical reactions visit:

brainly.com/question/18671493

#SPJ11

Discuss the inter-relationship of the muscular system to the
skeleton. Your response should examine the skeleton and
the muscle independently and then how they work
together. Your response should in

Answers

The muscular system and the skeleton are intricately interrelated, as they work together to provide structure, movement, and support to the human body. The muscles and skeleton function independently to perform their respective roles, but they also rely on each other for optimal functioning.

The skeleton serves as the framework of the body, providing support and protection to internal organs. It consists of bones, joints, and cartilage. On the other hand, the muscular system is composed of muscles, tendons, and ligaments, which enable movement and generate force. Muscles are attached to bones via tendons, allowing them to exert force on the skeleton to produce movement.

When the muscular system contracts, it pulls on the bones, creating a joint action that results in movement. This contraction is made possible by the interaction between muscle fibers, which slide past each other, causing the muscle to shorten. The skeletal system acts as a lever system, with the bones acting as levers and the joints as fulcrums. This lever system allows the muscles to generate the necessary force and produce a wide range of movements.

Furthermore, the skeletal system provides stability and support to the muscles. The bones act as anchors for the muscles, giving them a solid base to exert force against. Without the skeletal system, the muscles would have no structure to work against, and their ability to generate movement would be severely compromised.

In summary, the muscular system and the skeleton have a symbiotic relationship. While the skeletal system provides support and structure, the muscular system generates force and enables movement. Together, they work in harmony to facilitate the various functions of the human body, allowing us to perform everyday tasks and engage in physical activities.

Learn more about muscular system:

https://brainly.com/question/1283837

#SPJ11

The insertion of_______into the membrane of the collecting ducts increases the amount of water that is reabsorbed. a) atrial natriuretic peptide (ANP). b) capillary beds. c) aquaporins. d) angiotensin II. e) angiotensin I.

Answers

The insertion of aquaporins into the membrane of the collecting ducts increases the amount of water that is reabsorbed. The correct answer is option c.

Aquaporins are specialized membrane proteins that facilitate the movement of water molecules across cell membranes. In the context of the kidney, aquaporins play a crucial role in regulating water reabsorption.

When aquaporins are inserted into the membrane of the collecting ducts, they create channels that allow water to passively move from the urine filtrate back into the surrounding tissue and bloodstream.

This process is essential for maintaining water balance and preventing excessive water loss. Therefore, the correct answer is option c.

To know more about Aquaporins refer to-

https://brainly.com/question/32103391

#SPJ11

7. Start with a photon of sunlight and a carbon atom in a molecule of carbon dioxide in the atmosphere: model/diagram their pathway from that starting point to their final destination as a molecule of glucose that is used for energy in the cells of the plant stem. Following your diagram/model, provide a written explanation for what your diagram/model depicts. Make sure both your model and explanation are clear, concise, and have the appropriate level of detail to clearly demonstrate you understand photosynthesis, cellular respiration, and the movement of mass and energy in plants.

Answers

This process results in the movement of mass and energy in the plant, which is necessary for its growth and survival.

The pathway from a photon of sunlight and a carbon atom in a molecule of carbon dioxide to the final destination of glucose molecule is as follows:

Carbon dioxide and water are absorbed by the plant, carbon dioxide enters the plant through the stomata on the leaves and is diffused in the mesophyll cells.

The water is taken from the roots and transported through the xylem in the stem. The carbon dioxide and water react in the chloroplasts with the help of sunlight, to produce glucose and oxygen.

This process is called photosynthesis.

Glucose is transported by phloem to the roots and leaves of the plant where it can be used for energy by the plant cells. This energy is then used by the plant in various ways, such as the growth of roots, stems, and leaves.

Respiration: Oxygen is produced as a by-product of photosynthesis and is used by the plant in respiration.

In respiration, glucose is broken down to release energy that is used by the plant for growth, repair, and reproduction. This process takes place in the mitochondria of the plant cells.

Movement of mass and energy in plants:

During photosynthesis, light energy is converted to chemical energy stored in the form of glucose, which is used by the plant for energy.

Oxygen is produced as a by-product, which is used by the plant during respiration.

This results in the movement of mass and energy in the plant, which is necessary for its growth and survival.

The diagram shows how carbon dioxide, water, and sunlight combine in the chloroplasts of the plant to produce glucose and oxygen.

The glucose is then transported by phloem to the roots and leaves of the plant for energy.

Oxygen is produced as a by-product and is used by the plant during respiration.

to know more about photosynthesis visit:

https://brainly.com/question/29764662

#SPJ11

One way of identifying a drug target in a complex cellular extract is to use an affinity approach, i.e. fix the drug to a resin (agarose etc) and use it to "pull down "" the target from the extract. What potential problems do you think may be encountered with attempting this approach?

Answers

One way of identifying a drug target in a complex cellular extract is by using an affinity approach which involves fixing the drug to a resin such as agarose. The target is then "pulled down" from the extract.

However, this approach may encounter some potential problems such as:

Non-specific binding: The drug resin could bind to other molecules that are unrelated to the target protein, leading to inaccurate results.Difficulty in obtaining a pure sample: Even though the target molecule could bind to the drug resin, other proteins and molecules can also bind which makes it challenging to obtain a pure sample.Low Abundance Targets: In a complex cellular extract, the target molecule may exist in low abundance and the signal might not be strong enough to detect, making it difficult to pull down.Biochemical Incompatibility: The drug and the resin may not be compatible with the target, thus it may not bind or bind weakly which means the target protein might not be able to be pulled down.

Therefore, while the affinity approach is a very useful and important method for drug target identification, it also has its limitations and potential problems that need to be considered.

Learn more about Affinity approach:

brainly.com/question/14240799

#SPJ11

After a meal, metabolic fuel is stored for use between-meals. In what form(s) is metabolic fuel stored for use between-meals? What tissue(s) is it stored in? And how might this storage be impaired with a low-carbohydrate/high-fat diet but not with a low-carbohydrate/high-protein diet?

Answers

Glycogen is stored in the liver and muscles, while fat is stored in adipose tissue. Low-carbohydrate/high-fat diets can impair glycogen storage because they limit carbohydrate intake, which is required for glycogen synthesis.  

Glycogen is the storage form of glucose in the liver and muscles. It can be used quickly as a source of glucose when blood glucose levels start to decrease. Fat is stored in adipose tissue as triglycerides, which can be broken down and used for energy. The liver can hold about 100g of glycogen, while muscle can store up to 400g. Glycogen is used when glucose is needed quickly, like when blood glucose levels start to drop. The adipose tissue stores fat as triglycerides and is the body's largest fuel reserve. If blood glucose levels remain low, the body will start to break down fat to use as energy.  This type of diet reduces glycogen stores in the liver and muscles, which can lead to fatigue and a decrease in athletic performance.

In contrast, a low-carbohydrate/high-protein diet does not impair glycogen storage because it still provides enough carbohydrates for glycogen synthesis. A low-carbohydrate/high-fat diet can also lead to an increase in fat storage because the body is not using carbohydrates for energy and is instead storing the fat that it would have otherwise used for energy.

To know more about metabolic visit:

brainly.com/question/15464346

#SPJ11

If excess metabolic fuel is taken in over time, metabolic fuel is stored for the long term. In what form(s) is metabolic fuel stored for the long term? What tissue(s) is it stored in? And how is this storage impacted by the form(s) in which the excess metabolic fuel is taken in as?

Answers

When excess metabolic fuel is taken in over time, metabolic fuel is stored for the long term in adipose tissue. Adipose tissue is the primary site of storage for metabolic fuel in the body. The fuel is stored in the form of triglycerides (i.e., three fatty acids attached to a glycerol molecule).

Excess metabolic fuel is taken in when energy intake exceeds energy expenditure. This excess fuel is converted to fat and stored in adipose tissue for the long term. Adipose tissue is present throughout the body and serves as an energy reserve for times of low energy availability.

The form(s) in which the excess metabolic fuel is taken in can impact this storage in various ways. For example, if the excess fuel is taken in the form of carbohydrates, the body will first store this excess glucose in the liver and muscles in the form of glycogen.

However, once these storage sites are full, the excess glucose is converted to fat and stored in adipose tissue. If the excess fuel is taken in the form of dietary fat, the body can readily store this fat directly in adipose tissue without first converting it to another form.

However, it's worth noting that the types of dietary fat consumed can impact the storage and metabolism of this fuel. For example, saturated and trans fats tend to be more readily stored as fat in adipose tissue than unsaturated fats.

To know more about adipose tissue visit:

https://brainly.com/question/30764836

#SPJ11

The ___________determines where different plant species live, and the ________ determines where different animal species live.
a) type of climate; type of plants
b) type of animals; type of plants
c) type of plants; type of climate
d) type of climate; type of climate
5. The amount of energy that an ecosystem has available for plant growth is called ____.
a) gross primary productivity (GPP)
b) net primary productivity (NPP)
c) ecosystem carrying capacity
d) ecosystem trophic level

Answers

The first statement is: The ___________determines where different plant species live, and the ________ determines where different animal species live.Option (C) type of plants; type of climate determines where different plant species live, and the type of climate determines where different animal species live.

There is a co-dependency between plants and climate. They influence each other in a significant way. Different plant species have adapted to living in specific climate conditions, and various climate conditions also influence the growth and survival of different plant species.In the same way, the type of climate has a significant effect on animal species. Different animals have different preferences of temperature, humidity, and precipitation. Therefore, the climate conditions of a particular area determine the habitat of different animal species and their survival.

The second statement is:

The amount of energy that an ecosystem has available for plant growth is called ____Option (B) net primary productivity (NPP) is the correct answer.Net primary productivity (NPP) is the amount of energy produced by plants in an ecosystem. It is the measure of the amount of energy that is available for plant growth and for the other members of the ecosystem. It can be calculated by subtracting the energy used by plants during respiration from the total amount of energy that they have produced through photosynthesis.

To know more about plant species visit:

https://brainly.com/question/30036932

#SPJ11

Traits such as height and skin colour are controlled by than one gene. In polygenic inheritance, several genes play a role in the expression of a trait. A couple (Black male and White female) came together and had children. They carried the following alleles, male (AABB) and female (aabb). Question 11: With a Punnet square, work out the phenotypic and genotypic ratios F1 generation of this cross (Click picture icon and upload) Phenotype ratio: Click or tap here to enter text. Genotype ratio: Click or tap here to enter text. Question 12: Take two individuals from F1 generation and let them cross. Work out the phenotypic and genotypic ratios of the F2 generation by making use of a Punnet square (Click picture icon and upload)

Answers

Given A black male (AABB) and a white female (aabb) came together and had children. The question is to work out the phenotypic and genotypic ratios of F1 and F2 generations using Punnet square.

Working:

F1 generation:Given:A black male (AABB) and a white female (aabb) had children and each child carried two alleles from each parent.Hence, the gametes produced by the Black male are AB and the gametes produced by White female are ab.Using the Punnet square method, we get:F1 generationAB Ab aB abAB AABB AABb AaBB AaBbAb AABb Aabb AaBb AabbF1 generation genotypic ratio: 1:2:1:2:4 (AABB:AABb:AaBB:AaBb:aabb)F1 generation phenotypic ratio: 1:2:1 (Black:African American:White)Hence, the phenotypic ratio is 1:2:1 and the genotypic ratio is 1:2:1:2:4 (AABB:AABb:AaBB:AaBb:aabb).

F2 generation:

Given: Two individuals from F1 generation (AABb) are crossed and the gametes produced are AB, Ab, aB and ab.Using the Punnet square method, we get:F2 generationA aB Ab abA AA Aa Aa aaB Aa BB Bb bbA Aa Bb AB AbF2 generation genotypic ratio: 1:2:1:2:4:2:4:2:1F2 generation phenotypic ratio: 9:3:4 (Black:African American:White)Hence, the phenotypic ratio is 9:3:4 and the genotypic ratio is 1:2:1:2:4:2:4:2:1.

About Genotypic

Genotypic is a term used to describe the genetic state of an individual or a group of individuals in a population. Genotype can refer to the genetic state of a locus or the entire genetic material carried by chromosomes. The genotype can be either homozygous or heterozygous.

Learn More About Genotypic at https://brainly.com/question/22108809

#SPJ11

Consider a phenotype for which the allele Nis dominant to the allele n. A mating Nn x Nn is carried out, and one individual with the dominant phenotype is chosen at random. This individual is testcrossed and the mating yields four offspring, each with the dominant phenotype. What is the probability that the parent with the dominant phenotype has the genotype Nn?

Answers

In the given scenario, we have a dominant phenotype determined by the N allele, which is dominant to the n allele. We are conducting a testcross on an individual with the dominant phenotype.

Let's analyze the possibilities:

The chosen individual with the dominant phenotype can be either homozygous dominant (NN) or heterozygous (Nn).

If the individual is NN (homozygous dominant), all the offspring from the testcross would have the dominant phenotype.

If the individual is Nn (heterozygous), there is a 50% chance for each offspring to inherit the dominant phenotype.

Given that all four offspring have the dominant phenotype, we can conclude that the chosen individual must be either NN or Nn. However, we want to determine the probability that the parent with the dominant phenotype has the genotype Nn.

Let's assign the following probabilities:

P(NN) = p (probability of the parent being NN)

P(Nn) = q (probability of the parent being Nn)

Since all four offspring have the dominant phenotype, we can use the principles of Mendelian inheritance to set up an equation:

q^4 + 2pq^3 = 1

The term q^4 represents the probability of having four offspring with the dominant phenotype when the parent is Nn.

The term 2pq^3 represents the probability of having three offspring with the dominant phenotype when the parent is Nn.

Simplifying the equation:

q^4 + 2pq^3 = 1

q^3(q + 2p) = 1

Since q + p = 1 (the sum of probabilities for all possible genotypes equals 1), we can substitute q = 1 - p into the equation:

(1 - p)^3(1 - p + 2p) = 1

(1 - p)^3(1 + p) = 1

(1 - p)^3 = 1/(1 + p)

1 - p = (1/(1 + p))^(1/3)

Now we can solve for p:

p = 1 - [(1/(1 + p))^(1/3)]

Solving this equation, we find that p ≈ 0.25 (approximately 0.25).

Therefore, the probability that the parent with the dominant phenotype has the genotype Nn is approximately 0.25 or 25%.

To know more about dominant phenotype- https://brainly.com/question/14063427

#SPJ11

Suppose study looked at smoking (yes/no) as an exposure and CHD (yes/no) as outcome, and found a relative risk of 2.15. Which of the following is the correct interpretation of the RR? Smoking increases the risk of CHD by 2.15 The risk of CHD among smokers is 2.15 time the risk of non-smokers_ The risk among smokers is 2.15 higher than non-smokers_ The risk of CHD among non-smokers is half that of smokers

Answers

The correct interpretation of the RR is: Smoking increases the risk of CHD by 2.15. Hence Option Smoking increases the risk of CHD by 2.15 is correct.

Suppose a study looked at smoking (yes/no) as an exposure and CHD (yes/no) as outcome, and found a relative risk of 2.15. The correct interpretation of the RR is: Smoking increases the risk of CHD by 2.15.Relative risk (RR) is a measure of the strength of the association between an exposure and an outcome. In this case, smoking (exposure) and CHD (outcome) are being measured. When the RR is greater than 1, it suggests that the exposure is associated with an increased risk of the outcome.

If the RR is less than 1, the exposure is associated with a reduced risk of the outcome. If the RR is equal to 1, it suggests that the exposure is not associated with either an increased or reduced risk of the outcome.Here, the relative risk of 2.15 suggests that the risk of CHD is 2.15 times higher among smokers than non-smokers. Therefore, the correct interpretation of the RR is "Smoking increases the risk of CHD by 2.15".

To know more about Smoking  visit

https://brainly.com/question/29377889

#SPJ11

a) HOX genes are highly conserved among animals. This
Group of answer choices
a.Indicates they have accumulated many non-synonymous changes over time
b.Means they can be used to determine the relatedness among recently diverged lineages
c.Gives a mechanism to Von Baer’s observation of the similarity among early embryo forms of distantantly-related lineages
d.Suggests the genes have different functions in different lineages

Answers

c) Gives a mechanism to Von Baer’s observation of the similarity among early embryo forms of distantly-related lineages.

HOX genes are highly conserved among animals, meaning they are found in similar forms across different animal lineages. This conservation provides a mechanism for Von Baer's observation that the early embryos of distantly-related species share common characteristics. HOX genes play a crucial role in embryonic development, specifically in determining the body plan and segment identity. The conservation of HOX genes suggests that they have been maintained throughout evolution due to their important role in regulating embryonic development. While different lineages may have variations in the specific functions of HOX genes, the overall conservation of these genes highlights their fundamental role in shaping animal body plans and supports the observed similarities among early embryo forms across different species.

learn more about Von Baer’s observation here:

https://brainly.com/question/13022575

#SPJ11

What is the major constraint of using the body surface for external exchange? A. Using the body surface for respiration prevents the animal being camouflaged
B. As animals get bigger their surface area to volume ratio gets smaller C. It is impossible to keep the body surface moist D.Using the body surface for respiration requires special hemoglobin E. Animals that use their body surface to respire must move quickly to ensure sufficient gas exchange

Answers

The major constraint of using the body surface for external exchange is that, as animals get bigger, their surface area to volume ratio gets smaller.

As the size of an animal increases, the ratio of surface area to volume decreases. This is because volume increases more quickly than surface area. As a result, larger animals have less surface area relative to their size than smaller animals. The body surface is the outer covering of an organism, which is responsible for the exchange of gases and nutrients with the surrounding environment.

The body surface is a common site of gas exchange in many animals, including insects, earthworms, and fish. Animals that respire through their body surface are known as cutaneous respirators.

The correct answer is B. As animals get bigger, their surface area to volume ratio gets smaller.

To know more about body surface, visit:

https://brainly.com/question/17224116

#SPJ11

In the catabolism of saturated FAs the end products are H2O and CO2
a) Indicate the steps involved in the β-oxidation of stearic acid to acyl CoA and acetyl CoA.

Answers

The steps involved in the β-oxidation of stearic acid to acyl CoA and acetyl CoA are as follows: Step 1: Activation of Fatty Acids in the Cytosol Fatty acids that enter the cell are activated by the addition of CoA and ATP.

In the catabolism of saturated FAs, the end products are H2O and CO2. The steps involved in the β-oxidation of stearic acid to acyl CoA and acetyl CoA are as follows:Step 1: Activation of Fatty Acids in the CytosolFatty acids that enter the cell are activated by the addition of CoA and ATP. This reaction is catalyzed by the enzyme acyl-CoA synthase and occurs in the cytosol of the cell. This activation process creates a high-energy bond between the fatty acid and the CoA molecule.Step 2: Transport of Acyl-CoA to the MitochondriaAcyl-CoA is transported to the mitochondria, where it undergoes β-oxidation. Transport of acyl-CoA into the mitochondria is accomplished by a transport system in the mitochondrial membrane.

Step 3: β-Oxidation of Fatty Acids The β-oxidation pathway breaks down the acyl-CoA into a series of two-carbon units, which are then released as acetyl-CoA. This process requires a series of four enzymatic reactions. At the end of this cycle, the fatty acid is two carbons shorter, and another molecule of acetyl-CoA has been generated. Step 4: Release of Energy The acetyl-CoA molecules generated by β-oxidation enter the citric acid cycle, where they are further oxidized to release energy. The final products of this process are CO2, water, and ATP.

To know more about β-oxidation visit

https://brainly.com/question/32150443

#SPJ11

Cystic fibrosis (CF) is a recessive disease. Joe, who is not diseased, has a sister with CF. Neither of his parents have CF. What is the probability that Joe is heterozygous for the CF gene? What is the probability that Joe does not have the CF allele?

Answers

The probability that Joe is heterozygous (a carrier) for the CF gene is 50% because he has a 50% chance of inheriting one normal allele and one CF allele from his carrier parents.

Cystic fibrosis (CF) is a recessive disease, meaning that an individual needs to inherit two copies of the CF allele to have the disease. In this case, Joe's sister has CF, indicating that she inherited two CF alleles, one from each parent. Joe, on the other hand, is not diseased, so he must have inherited at least one normal allele for the CF gene. Since neither of Joe's parents have CF, they must be carriers of the CF allele. This means that each parent has one normal allele and one CF allele. When Joe's parents had children, there is a 25% chance for each child to inherit two normal alleles, a 50% chance to inherit one normal and one CF allele (making them a carrier like their parents), and a 25% chance to inherit two CF alleles and have CF.

Therefore, the probability that Joe is heterozygous (a carrier) for the CF gene is 50% because he has a 50% chance of inheriting one normal allele and one CF allele from his carrier parents. The probability that Joe does not have the CF allele is 75% because he has a 25% chance of inheriting two normal alleles from his parents, and a 50% chance of inheriting one normal and one CF allele, which still makes him a non-diseased carrier.

Learn more about Cystic fibrosis here:

https://brainly.com/question/31366825

#SPJ11

TRUE or FALSE --> explain why and give an example
Activator transcription factors exert their effect on gene expression by increasing the number of non-covalent bonds formed to stabilize RNA polymerase's binding at the promoter of a gene.

Answers

The given statement that activator transcription factors exert their effect on gene expression by increasing the number of non-covalent bonds formed to stabilize RNA polymerase's binding at the promoter of a gene is True.

Transcription factors are DNA-binding proteins that regulate gene expression. They bind to specific sequences of DNA to either stimulate or inhibit the transcription of a gene. Activator transcription factors, as the name suggests, enhance the expression of a gene. They do so by binding to specific DNA sequences in the promoter region of the gene and recruiting RNA polymerase, the enzyme responsible for transcription, to the site of transcription.

Activator transcription factors increase the number of non-covalent bonds formed to stabilize RNA polymerase's binding at the promoter of a gene. The activator protein binds to the enhancer site on the DNA and recruits other proteins called coactivators. These coactivators then bind to the mediator complex, which interacts with the RNA polymerase to initiate transcription.

In the lac operon, the lac repressor protein binds to the operator site on the DNA and prevents RNA polymerase from binding to the promoter and transcribing the genes necessary for lactose metabolism. However, when lactose is present, it binds to the lac repressor protein and changes its conformation, causing it to release from the operator site. This allows activator transcription factors, like cAMP-CRP, to bind to the promoter region and stimulate transcription.

Learn more about transcription factors here:

https://brainly.com/question/29851119

#SPJ11

1. Briefly what is the function of cytotoxic t cells in cell-mediated immunity ?
2. Why are only high risk events infect HIV postive people while other events like skin to skin comtact does not infect them?

Answers

1.Casual contact with an HIV-positive person like shaking hands, hugging, or using the same toilet seat does not increase the risk of HIV transmission.

2.HIV (Human Immunodeficiency Virus) is primarily transmitted through specific routes, regardless of whether a person is considered high risk or not.

1. Function of cytotoxic T cells in cell-mediated immunity: Cytotoxic T cells (CTLs) or CD8+ T cells are a type of T lymphocyte that contributes to cell-mediated immunity by destroying virus-infected cells, tumor cells, and cells infected by other intracellular pathogens. They can target and kill these cells with the help of MHC-I molecules present on the surface of these infected cells.Cytotoxic T cells recognize and bind to antigenic peptides presented by major histocompatibility complex (MHC) class I molecules.

Once activated, these cells release cytokines that help activate other immune cells like macrophages, dendritic cells, and natural killer cells. They also secrete a protein called perforin, which forms pores in the target cell membrane, leading to cell lysis.2. High risk events infect HIV positive people while other events like skin to skin contact does not infect them because:HIV can be transmitted through bodily fluids, including blood, semen, vaginal fluids, and breast milk. High-risk events like unprotected sex, sharing needles or syringes for drug use, or mother-to-child transmission during pregnancy, delivery, or breastfeeding increase the chances of exposure to HIV.

Skin-to-skin contact, on the other hand, does not involve the exchange of bodily fluids, and therefore, the risk of HIV transmission through this route is negligible.HIV is a fragile virus that cannot survive outside the body for a long time. Therefore, casual contact with an HIV-positive person like shaking hands, hugging, or using the same toilet seat does not increase the risk of HIV transmission. HIV can only be transmitted when there is an exchange of bodily fluids containing the virus.

learn more about HIV transmission

https://brainly.com/question/30975140

#SPJ11

Elongation continues in translation until a STOP codon is reached on the mRNA. a) True b) False

Answers

a) True.

During translation, elongation refers to the process of adding amino acids to the growing polypeptide chain. It continues until a STOP codon is encountered on the .

The presence of a STOP codon signals the termination of protein synthesis and the release of the completed polypeptide chain from the ribosome.

Learn more about polypeptide   here:  

https://brainly.com/question/28495042

#SPJ11

Other Questions
A ship, travelling at 12 knots, has an autopilot system with a time and gain constants of 107 s and 0.185 s, respectively. The autopilot moves the rudder heading linearly from 0 to 15 degrees over 1 minute. Determine the ships heading, in degrees, after 1 minute. Which of the following is not a high risk factor for Alzheimer's disease?a. Senior B. High education level C. Female D. Positive family history By 1870, the __________ household was the norm for a large majority of African Americans.two-parentdispersed-familyone-parentmultigenerationalThe answer is not multigenrational WILL UPVOTE PLEASE AND THANK YOU!!! :)10. Aflotoxins are dangerous toxins produced by Aspergillus flavus in food grains such as corn. True False Chapter 23 phase a. b. All protozoan pathogens have a cyst trophozoite sexual blood C. d. e. An inductor L, resistor R, of value 52 and resistor R. of value 102 are connected in series with a voltage source of value V(t) = 50 cos cot. If the power consumed by the R, resistor is 10 W. calculate the power factor of the circuit. [5 Marks] This PA 2 assignment requires you to identify a current change in an organization with which you are familiar, and evaluate a current public issue about which "something must be done." In relation to the change issue, think about what sense-making changes might need to be enacted and how you would go about doing this. Then, design a mindmap visually assessing this in terms of the eight (8) elements of the sense-making framework suggested by Helms Mills and as set out in Table 9.7:Sensemaking and identity constructionSocial sense-makingExtracted cues of sensemakingOngoing sense-makingRetrospectionPlausibilityEnactmentProjective sense-makingMake sure you visually address the following questions:Which ones did you believe you might have the most/least control over, and why?What implications does this have for adopting a sense-making approach to organizational change?Note Course :BUS 700 Leadership and Creative Solution Implementation Area : Management 11kg of R-134a at 320kPa fills a rigid tank whose volume is 0.011m. Find the quality, the temperature, the total internal energy and enthalpy of the system. If the container heats up and the pressure reaches to 600kPa, find the temperature, total energy and total enthalpy at the end of the process. A connecting rod of length /= 11.67in has a mass m3 = 0.0234blob. Its mass moment of inertia is 0.614 blob-in. Its CG is located 0.35/ from the crank pin, point A. A crank of length r= 4.132in has a mass m = 0.0564blob. Its mass moment of inertia about its pivot is 0.78 blob-in. Its CG is at 0.25r from the main pin, O. The piston mass= 1.012 blob. The thickness of the cylinder wall is 0.33in, and the Bore (B) is 4in. The gas pressure is 500psi. The linkage is running at a constant speed 1732rpm and crank position is 37.5. If the crank has been exact static balanced with a mass equal to me and balance radius of r, what is the inertia force on the Y-direction? What are the five principal reactions that occurred duringprimodial nucleosynthesis?Name all the types of stable nuclei that remained afterprimordial nucleosynthesis had finished.At what proportio Blue Design Works generated $521,520 in operating income on sales revenue of $3,259,500. The company had $2,300,000 in assets on January 1 and $3,000,000 in assets on December 31.(a-b)(a) Calculate Blues margin.(b) Calculate Blues asset turnover. (Round answer to 2 decimal places, e.g. 0.65.)Calculate Blues return on investment. (Round answer to 2 decimal places, e.g. 5.12%.) Stability (3 marks) Explain why the moment of stability (righting moment) is the absolute measure for the intact stability of a vessel and not GZ. A certain company contains three balanced three-phase loads. Each of the loads is connected in delta and the loads are:Load 1: 20kVA at 0.85 pf laggingLoad 2: 12kW at 0.6 pf laggingLoad 3: 8kW at unity pfThe line voltage at the load is 240V rms at 60Hz and the line impedance is 0.5 + j0.8 ohms. Determine the line currents and the complex power delivered to the loads. State one possible hypothesis that can explain the global distribution of lactase persistence (lactose tolerance) and lactase nonpersistance (lactose intolerance). Be sure to include the following keywords in your explanation; selection, fitness, survival. You currently have $39,471 in an account that pays 5 percent interest. You plan to deposit in this account $3581 at the end of each year until the account reaches $124578. How long would that take? Enter your answer in 4 decimals (e.g. 5.1234). topic is depression among international students. i need answerfor the following headings.conclusionrecommendationsreference list Why taxonomic nomenclature is important? It provides the unified language for communication about biological diversity. It reflects evolutionary relatedness of taxa. Scientific names often capture important characteristics of the animals. It documents the history of science. All of the above. 15) UTI's with microbial etiology include: A. cystitus. B. Urethritis C. Leptospirosis D. A and B E. A, B and C 16) The cause of gonorrhea is a member of the genus: A. Borrelia B. treponema C. Neisseria D. Mycobacterium E. plasmodium 17) Which antibody is most import in immediate hypersensitivity reactions: A. IgG B. IgM C. IgA D. ISE 18) Which is true. Of. HPV (papillomavirus) A. Only two strains. Effect humans B. It can cause genital warts C. Less than 1% of women are effected D. No vaccine is available 19). Trichomonal. Vaginitis is caused by: A. Yeast B. Bacteria C. Protozoan D. Chlamydia E. A virus 20) Lyme disease A. Is highly contagious B. Early symptoms include rash and flu like symptoms etiology D. Mosquito vector C. Viral problem 1 onlyPROBLEM 1: A car travels a 10-degree inclined road at a speed of 20 ft/s. The driver then applies the break and tires skid marks were made on the pavement at a distance "s". If the coefficient of kinetic friction between the wheels of the 3500-pound car and the road is 0.5, determine the skid mark distance. PROBLEM 2: On an outdoor skate board park, a 40-kg skateboarder slides down the smooth curve skating ramp. If he starts from rest at A, determine his speed when he reaches B and the normal reaction the ramp exerts the skateboarder at this position. Radius of Curvature of the Identify the correct statement. For a gas to expand isentropically from subsonic to supersonic speeds, it must flow through a convergent-divergent nozzle. O A gas can always expand isentropically from subsonic to supersonic speeds, independently of the geometry O For a gas to expand isentropically from subsonic to supersonic speeds, it must flow through a convergent nozzle. O For a gas to expand isentropically from subsonic to supersonic speeds, it must flow through a divergent nozzle. If a Gaussian surface has no electric flux, then there is no electric field inside the surface. A E(True). B (Fale).