Hi there!
[tex]\large\boxed{ME = 50 J}}[/tex]
Mechanical Energy = Potential Energy + Kinetic Energy, or:
E = U + K
Plug in the given potential and kinetic energies:
E = 12.5 + 37.5 = 50 J
Krishna wants to measure the mass and volume of a key. Which tools should she use?
a balance and a beaker of water
a balance and a meter stick
a beaker of water and a ruler
a ruler and a meter stick
Answer:
a balance and a beaker of water
Explanation:
The mass can easily be measured with balance. If you drop the key in a beaker of water, the water inside the beaker will increase and this increases the volume of water that will be equal to volume of key.
a person would weigh less on Mercury than on planet blank because blank
Answer:
Earth because of greater gravity
What would the kinetic energy of a 20kg person running at a velocity of 2.5m/s?
Answer:
62.5 JExplanation:
The kinetic energy of an object can be found by using the formula
[tex]k = \frac{1}{2} m {v}^{2} \\ [/tex]
m is the mass in kg
v is the velocity in m/s
From the question
m = 20 kg
v = 2.5 m/s
From the question we have
[tex]k = \frac{1}{2} \times 20 \times {2.5}^{2} \\ = 10 \times 6.25 \\ = 62.5\: \: \: \: \: \: \: \: \: \: [/tex]
We have the final answer as
62.5 JHope this helps you
Describe the forces that make a bicycle move.
Answer:
this is an example of Newton's Second Law, acceleration happens when a force acts on a mass.
the force that makes the bicycle move is your foot pushing against the pedal
If a car is at rest, which of the following is correct?
A.not enough information
B.more than 3 forces are acting on the car
C.no force acts on the car
D.The net force on the car is zero
Answer:
D
Unbalanced or net forces acting on the car will cause it to move
The correct answer is option D. The net force on the car is zero.
What forces act on a car at rest?
Since the car is not accelerating, the force of air resistance and the friction force must add to give the exact opposite of the applied force. The net force here would be zero, as well.
When an object is at rest no gravitational force is acting on it?Newton's First Law is the law of inertia. An object with no net forces acting on it which is initially at rest will remain at rest. If it is moving, it will continue to move in a straight line with constant velocity.
Learn more about Newton's First Law here: https://brainly.com/question/11472821
#SPJ2
Question 5: A heavy rope is flicked upwards, creating a single pulse in the rope. Make a drawing of the rope and indicate the following in your drawing
a. the direction of motion of the pulse
b. Amplitude
c. Pulse length
d. Position of the rest
Answer:
the direction of motion of the pulse
How many revolutions does the motor shaft turn through between the time when the current is reversed and the instant when the angular velocity is zero
Answer:it equals 0
Explanation:hope this is a good answer
Angular velocity is the ratio of angular displacement to time. Then the number of turns by the shaft is zero.
What is angular velocity?The rate of change of angular displacement is called angular velocity. It is a vector quantity.
We know that the angular velocity formula
[tex]\rm Angular \ velocity = \dfrac{Angular \ displacement}{time}[/tex]
The motor shaft turns through between the time when the current is reversed and the instant when the angular velocity is zero.
Then the number of turns will be
[tex]\rm Number \ of\ turns = Angular \ velocty \times time \\\\Number \ of\ turns = 0 *time \\\\Number \ of\ turns = 0[/tex]
The number of turns by the shaft is zero.
More about the Angular velocity link is given below.
https://brainly.com/question/7359669
What might be an example of newtons second law of motion
Answer:
Pushing a car and a truck
Explanation:
UV light has ______ wavelengths than visible light waves, and its peak energy is at a wavelength of ______.
Explanation:
Shorter wavelength since UV light has more energy than visible light
365 nm - What is the peak energy wavelength of UV light? It allows both infrared daylight and ultraviolet night-time communications by being transparent between 320 nm and 400 nm and also the longer infrared and just-barely-visible red wavelengths. Its maximum UV transmission is at 365 nm
When riding your bike, you come up to a small child who jumps in front of you. You slam on the brakes, and your bike comes to a sliding stop. Which force greatly increases when you lock the brakes and slide
Answer: friction :)
Explanation:
I took the test and got 100%
When making a left turn, drive into the intersection, make the turn smoothly and without strain on the engine, braking to about ... to .........mph and stay on the brake until approximately half way into the intersection.
Answer:
whats the question
Explanation:
A galaxy spectrum has a redshift of 70,000 km per second. If the Hubble constant is 70 km per second per Mpc (megaparsec), how far away from us in this galaxy
Using the Hubble law v = H₀d where v = recessional speed = 70,000 km per second H₀ = hubble constant = 70 km/s/Mpc and d = distance of galaxy.
Making d subject of the formula, we have
d = v/H₀
Substituting the values of the variables into the equation, we have
d = v/H₀
d = 70000 km/s/70 km/s/Mpc
d = 1000 Mpc
So, the galaxy is 1000 Mpc away from us.
Learn more about hubble law here:
https://brainly.com/question/18484687
NEED ANSWER ASAP!
Which statement about a converging lens is not correct?
A ray parallel to the principal axis of the lens is refracted through the principal focus.
B All rays of light refracted by the lens pass through the principal focus.
C The distance between the centre of the lens and the principal focus is the focal length
D The principal focus of the lens is a point on the principal axis.
Geometric optics allows you to find which the correct answer about which false statement is:
B) All rays of light refracted by the lens pass through the principal focus.
Geometric optics studies the formation of images using the light geometric properties of optical systems, the main expression for this is:
[tex]\frac{1}{f} = \frac{1}{p} + \frac{1}{q}[/tex]
Where f is the focal length, p and q the distance to the object and the image respectively.
There are some points of special interest:
Object at infinity (p = ∞). In this case of the expression we see that the image is at the focal length. Image at infinity (q = ∞). In this case the object is at the focal point.
Let's analyze the claims.
A) True. A parallel ray comes from infinity and the image is formed at the focal point.
B) False. The image point is given by the expression above and depends on the distance to the object.
C) True. This is the definition of focal length.
D) True. All distances are measured from the main axis.
In conclusion, using geometric optics we can find that the correct answer about which false statement is:
B) All rays of light refracted by the lens pass through the principal focus.
Learn more about geometric optics here: brainly.com/question/2548694
Andrew skis down a hill.
Andrew starts from the top of the hill and his speed increases as he goes downhill.
He controls his speed and direction by using his skis.
He brings himself to a stop at the bottom of the hill.
Describe the energy changes that happen between starting and stopping.
Explanation:
gravitational potential energy at the top of the hill, which transforms into kinetic energy as he moves bottom of the hill
that's mean potential energy transfoms into kinetic energy
His potential energy is converted into kinetic energy when his speed increases as he goes downhill.
What is mechanical energy?Mechanical energy is the combination of all the energy in motion represented by total kinetic energy and the total potential energy stored energy in the system which is represented by total potential energy.
Total mechanical energy is s the sum of all the kinetic as well as potential energy stored in the system.
ME = KE + PE
When Andrew skis down a hill then he had stored potential energy due to the height of the hill and his gravitational weight,
Due to the height of the slope and his weight, Andrew had potential energy stored when he skied down it.
As he descended the hill, his speed increased, transforming this potential energy into kinetic energy.
Learn more about mechanical energy from here,
brainly.com/question/12319302
#SPJ2
The object in this diagram has a mass of 2 kg.
According to this diagram, what is the acceleration of this object?
A. 0 m/s2
B. 4 m/s2
C. 7 m/s2
D. 11 m/s2
Answer:
[tex]4 ms^{-2}[/tex]
Explanation:
Normal force - should be the reaction from the surface it's on - nullifies the weight of the object. At this point the only force is of [tex]22-14 = 8N[/tex] from whoever is pushing the square and the friction, towards the right. At this point we divide the force by the mass of the object to obtain an acceleration of [tex]8/2 = 4 ms^{-2}[/tex]
Please help me calculate this question along with the equation
Hi there!
We can use the following:
U (Gravitational Potential Energy) = mgh
m = mass of object (kg)
g = acceleration due to gravity OR gravitational field strength
h = height, or displacement (m)
ΔU = Uf - Ui, so:
Uf = 3 × 1.5 × 10 = 45 J
Ui = 3 × 0 × 10 = 0
ΔU = Uf - Ui = 45 - 0 = 45 J
consider two vectors A and B Where A-B and |A+B|=|A-2B| vector B is directed in the positive x_direction and A makes an angle of 60°above the positive x_axis find magnitude of the two vectors
Answer:
It should be mentioned that an efficient way to work this vector addition problem is with the cosine law for general triangles (and since
a
,
b
and
r
from an isosecles triangle, the angles are easy to figure). However, in the interest of reinforcing the usual systematic approach to vector addition, we note that the angle
b
makes with the +x axis is 30
0
+105
0
=135
0
(a) The x component of
r
x
=(10.0m)cos30
0
+(10.0m)cos135
0
=1.59m
(b) the y component of
r
is r
y
=(10.0m)sin135
0
= 12.1 m.
(c) the magnitude of
r
is r = ∣
r
∣=
(1.59m)
2
+(12.1m)
2
=12.2m
(d) The angle between
r
and the +x direction is tan
−1
[(12.1m)/(1.59m)]=82.5
0
Explanation:
What average force magnitude is required to stop a 15,000 kg train in 12.1 s if the train is traveling at 86 km/hr
Answer:
Explanation:
Givens
m = 15000 kg
t = 12.1 seconds
vi = 86 km / hr
vf =0
Formula
F = m*a
a = (vf - vi)/ t
vi has to be converted to m/s
86 km/hr [1000 m / 1 km] * [1 hour / 3600 seconds]
86 * 1000 / 3600 = 23.89 m/s
Solution
a = (vf - vi) / t
a = (0 - 23.89)/12.1
a = - 1.97 m/s^2 The minus means that the trains is slowing down.
F = 15000 kg * - 1.97 m/s^2
F = -29615.7 Newtons.
The drone can fly for 25 minutes before the battery needs recharging. the power output of the battery is 65.0 watts. calculate the maximum energy stored by the battery
help please!! needed asap!!
Answer:
stored Energy = Power x time = 65 x 25x 60 = 105.6 Kjoules
What time is the lunar eclipse tonight in california?
please solve due is today....asap please
Answer:
a)object is in uniform motion
Explanation:
velocity is constant.and a=0
body is in uniform motion.
BRAINLIST PLS
negatively charged particles of radiation emitted from the decay of radioactive substances are known as
Answer: beta particles
Explanation:
that's the answer
Choose all of the following that are compounds.
[]Air
[]Ink
[]Sodium (Na)
[]Mud
[]Hydrochloric acid (HCI)
[]Ocean water
[]carbon dioxide (CO2)
[]Hydrogen gas (H2)
[]water (H20)
Answer:
Ink
mud
hcl
ocean water
co2
h20
Kichelle enjoys balloon animals from the carnival. She just received a balloon giraffe that has an initial temperature of 39.0°C and a volume of 1.28 L. If Preston plays a trick on Kichelle, and puts her balloon giraffe into the freezer, what would be the new volume of the balloon if the temperature drops down to 8.0°C?
39°C=1.28L
8°C=? Less
=8°C/39°C×1.28L
=8/39×1.28L
=10.24/39
=512/195
=2.6L
If a statue is made out of wood, which of these words correctly describes the statue?
OA.
wooded
ОВ.
woody
OC.
non-wood
OD.
wooden
Answer:
Od- Wooden
Explanation:
It would not make sense if it was non-wood because that make it no a wood base product, OC is not right because its not a a plant that produces wood as its structural tissue and thus has a hard stem. An OA justT o take or get a supply of wood. so its Od
A taxi is travelling at 20 m/s. Its driver accelerates with acceleration 5 m/s2 for 4 s. What is its new velocity?
Please find attached photograph for your answer.
Hope it helps.
Do comment if you have any query.
please no irrelevant answers!
Light enters a glass block at an angle of incidence of 46°. The light refracts at an angle of refraction of 26°. What is the refractive index of the glass?
A 0.57
B 0.61
C 1.64
D 1.77
Answer:
Choice C: Approximately [tex]1.64[/tex].
(Assuming that light entered into this glass block from air.)
Explanation:
Let [tex]n_{1}[/tex] denote the refractive index of the first medium (in this example, air.) Let [tex]\theta_{1}[/tex] denote the angle of incidence.
Let [tex]n_{2}[/tex] denote the refractive index of the second medium (in this example, the glass block.) Let [tex]\theta_{2}[/tex] denote the angle of refraction.
By Snell's Law:
[tex]n_{1} \, \sin(\theta_{1}) = n_{2}\, \sin(\theta_{2})[/tex].
Rearrange the equation to find an expression for [tex]n_{2}[/tex], the refractive index of the second medium (the glass block.)
[tex]\begin{aligned}n_{2} = \left(\frac{\sin(\theta_{1})}{\sin(\theta_{2})}\right)\, n_{1}\end{aligned}[/tex].
The refractive index of air is approximately [tex]1.00[/tex]. Substitute in the values and solve for [tex]n_{2}[/tex], the refractive index of the glass block:
[tex]\begin{aligned}n_{2} &= \left(\frac{\sin(\theta_{1})}{\sin(\theta_{2})}\right)\, n_{1} \\ &= \left(\frac{\sin(46^{\circ})}{\sin(26^{\circ})}\right)\times 1.00 \\ &\approx 1.64\end{aligned}[/tex].
I'LL MARK YOU BRAINLIST!!
ali starts moving his car from rest and accelerates it at 5 m/s^2 over 8 seconds. what is the velocity of ali's car reached by the end of these 8 seconds ?
Explanation:
u=0, v=?, a=5m/s², t=8sec
So, by the formula,
v=u+at
v=0+5×8
v=40m/s.
hope this helps you .
2. Summarize how to use a spring scale to measure a pull and how to use it to apply a push with
a specific force.
If the spring constant is known, the extension or compression of the spring can be used to calculate the applied force (pull or push) on the spring.
According to Hook's law, the force applied to an elastic material is directly proportional to the extension of the material.
The force applied;
F = kx
where;
k is the springThe applied force can be in form of push or pull. A push force can result in compression of the spring while a pull force can result in extension of the spring.
If the spring constant is known, the extension or compression of the spring can be used to calculate the applied force (pull or push) on the spring.
Learn more here:https://brainly.com/question/4404276
choose all the answers that apply.
Major areas of science include
____.
A.basic science
B.physical science
C.life science
D.social science
E. ethical science
Answer:
physical science
Explanation:
i guess??