Answer:
where m < M is delivered to the space station. Soon after, the space station's orbit is adjusted so that it is 50 km ...
A payload of mass m, where m<M, is delivered to the space station.
What is payload?The maximum mass that the vehicle is capable of moving is referred to as the mass's payload. The carrying capacity of a packet or other transmission data unit is referred to as a payload.
The phrase, which has military roots, is frequently used in relation to malicious code that can be executed and cause harm. A payload is a section of code that runs when hackers take advantage of a weakness. In other words, it's a module for an exploit.
It typically consists of a few commands that will execute on the targeted operating system in order to steal data and carry out other malicious deeds (such as keyloggers).
Therefore, A payload of mass m is sent to the space station, where m<M.
Learn more about the payload, refer to:
https://brainly.com/question/7137877
#SPJ2
help will give brainlist
Which unit is used for current?
power
resistance
voltage
amperes
mrs. knight drops her briefcase. when the briefcase lands on the floor, what is the reaction force to the action force of the briefcase on the floor?
Answer:
The force of the floor on the briefcase
Explanation:
The briefcase hits the floor and stops the falling which is reacting to the briefcase that was falling and hits the floor.
The falling briefcase would be the action force because it is moving downward
and
The reaction force would be the floor because it will react on the briefcase.
Hope this Helps
When the briefcase lands on the floor, the reaction force to the action force of the briefcase on the floor is force of the floor on the briefcase.
What are action force and reaction force?
It might be difficult to distinguish between action and reaction forces. This is due to the fact that both forces are always present.
One might argue that there are an equal number of forces in the universe if one were to count them all. However, the definition of the action force is provided by the perspective of the interaction analysis in order to help the argument.
A force that is applied to an object is known as an action force.
An action force with an opposite direction has an effect called a reaction force.
These two forces—also referred to as action and reaction forces—are covered by Newton's third law of motion.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ5
12. Since the Clean Air Act was passed in 1970, why is the air still not clean?
Answer:
Congress designed the Clean Air Act to protect public health and welfare from different types of air pollution caused by a diverse array of pollution sources.
Explanation:
What is the magnitude of the resultant of
a 3.0-
meter displacement and a 4.0-meter
displacement as shown in the diagram?
A. 1.0 meter
4.0 meters
B. 5.0 meters
3.0 meters
C. 7.0 meters
D. 12 meters
Answer:b. 5.0 meters
Explanation: d² = 3²+4²
d² = 9+16
d² = 25
d = √25
d = 5m
The magnitude of the displacement is 5 m as shown in the diagram. Option B is correct.
What is displacement?
Displacement can be defined as the total change in the position of the object. It is a vector quantity.
From the Pythagorean theorem,
[tex]d =\sqrt { 3^2 +4^2}\\\\d = \sqrt {25}\\\\d = 5[/tex]
Therefore, the magnitude of the displacement is 5 m.
Learn more about Displacement:
https://brainly.com/question/866068
what do i do on this rubixs cube
Answer:
You solve it
Explanation:
Answer:
you just spin it and spin it and spin it and spin it
and spin it
and spin it
and spin it
and spin it
until you get mad then throw it at the wall
Explanation:
ya then you look up a vid that is called rubix cube meme and there should be a pink animal its funny you should watch it!!!!!!!!!
What is the average speed of a car that travels 30 m in the 3 secs and 2 m 4 secs and 20 m 5 secs
Answer:
4.3333333
Explanation:
total distance / total time taken
30 + 2 + 20 / 3 + 4 + 5
52 / 12
4.3 recurring
pls help quickly
Which of these materials best scatters the light that strikes it?
a pure water
b shiny mirror
c frosted glass
d eyeglass lens
Answer: frosted glass
Explanation:
Answer:
C
Explanation:
Frosted Glass
A 40 N block is resting on a rough inclined plane. The static friction between the block and the plane is ____ N.
The static friction between the block and the plane is [tex]40(\mu_s) \ N[/tex].
The given parameters:
Weight of the block, W = 40 NThe normal reaction on the rough surface due to weight of the block is calculated as follows;
[tex]F_n = 40 \ N[/tex]
The static friction between the block and the plane is calculated as follows;
[tex]F_s = \mu_s F_n[/tex]
where;
[tex]\mu_s[/tex] is coefficient of static frictionThus, the static friction between the block and the plane is [tex]40(\mu_s) \ N[/tex].
Learn more about static friction here: https://brainly.com/question/13680415
Approximately how many kilograms (kg) of carnivore (secondary consumer) biomass can be supported by an area of a field containing 1,000 kg of plant material (assuming 10% efficiency in energy transfer)
Only 10 Kg of secondary consumers can be supported by the ecosystem.
There exists such a thing as the 10% rule in the transfer of energy in biomass from one trophic level to another. This rule ultimately controls the mass of biomass that is available at the next higher trophic level.
This rule state that only 10% of the energy in biomass is transferred to the next trophic level. By this rule, only 10% of the energy in the plant material is transferred to the carnivore population. Therefore, only 10 Kg of secondary consumers can be supported by the ecosystem.
Learn more about trophic level: https://brainly.com/question/13267087
Please help someone. A generator consumes 147 joules of energy in fuel and produces 75 joules of energy
in electricity. Engineers are challenged to produce a generator that is 20% more
efficient. Which of the following combinations of input and output energy represents a generator that has met this design challenge?
a. 150 joules of fuel to produce 90 joules of electricity
b. 135 joules of fuel to produce 68 joules of electricity
c. 60 joules of fuel to produce 100 joules of electricity
d. 115 joules of fuel to produce 82 joules of electricity
Answer:
A
Explanation:
Current effiency
= 75/147
= 0.5102
New Efficiency
= 120/100 × 0.5102
= 0.6122
Only option A satisfies this efficiency.
how many kilojoules is this?
Answer:
How to convert joules to kilojoules
One joule is equal to thousandth of a kilojoule:
1J = 0.001kJ
The energy in kilojoules E(kJ) is equal to the energy in joules E(J) divided by 1000:
E(kJ) = E(J) / 1000
Example
Convert 500 joules to kilojoules.
The energy E in kilojoules (kJ) is equal to 500 joules (J) divided by 1000:
E(kJ) = 500J / 1000 = 0.5kJ
Joules to kilojoules conversion table
Energy (J) Energy (kJ)
1 J 0.001 kJ
2 J 0.002 kJ
3 J 0.003 kJ
4 J 0.004 kJ
5 J 0.005 kJ
6 J 0.006 kJ
7 J 0.007 kJ
8 J 0.008 kJ
9 J 0.009 kJ
10 J 0.01 kJ
20 J 0.02 kJ
30 J 0.03 kJ
40 J 0.04 kJ
50 J 0.05 kJ
60 J 0.06 kJ
70 J 0.07 kJ
80 J 0.08 kJ
90 J 0.09 kJ
100 J 0.1 kJ
200 J 0.2 kJ
300 J 0.3 kJ
400 J 0.4 kJ
500 J 0.5 kJ
600 J 0.6 kJ
700 J 0.7 kJ
800 J 0.8 kJ
900 J 0.9 kJ
1000 J 1 kJ
2000 J 2 kJ
3000 J 3 kJ
4000 J 4 kJ
5000 J 5 kJ
6000 J 6 kJ
7000 J 7 kJ
8000 J 8 kJ
9000 J 9 kJ
10000 J 10 kJ
100000 J 100 kJ
hope it help u
itz by Riddhi
Explain why the formation of sand is a physical change.
Answer:
The formation of sand is a physical change because some of the physical properties of the rocks change, but their identities do not. The particles of rock are rearranged as their sizes and shapes change, but their identities and total mass remain the same.
a -0.06 C charge is placed in a uniform electric field with a strength of 200 N/C. what is the magnitude and direction of the force on the charge
The magnitude and direction of the force on the charge is -12 N opposite the electric field
To calculate the force on a charge in an electric field, we make use of the formula below.
Formula
F = E×Q .......................... Equation 1
Where:
F = Force on the chargeE = Electric FieldQ = chargeFrom the question,
Given:
E = 200 N/CQ = -0.06 CSubstitute these values into equation 1
F = 200(-0.06)F = -12 NNote: The negative sign indicates that the force is in the direction negative of the electric field.
Hence, The magnitude and direction of the force on the charge is -12 N opposite the electric field
Learn more about Electric Field here: https://brainly.com/question/14015797
Answer: A edge 202694020
Explanation:
a car is travelig at 20.0 m/s when the driver applies the brakes and comes to a stop. if the car slows down uniformly with an acceleration of -4.20 m/s, about how far does the car travel before coming to a rest
Since acceleration is constant, we can use the formula
v² - u² = 2a ∆x
where v = final velocity, u = initial velocity, a = acceleration, and ∆x = displacement. Then
0² - (20.0 m/s)² = 2 (-4.20 m/s²) ∆x
⇒ ∆x = (20.0 m/s)² / (8.40 m/s²) ≈ 47.6 m
Share your thoughts about this statement by John Wesley
"Electricty is the soul of universe"
Answer:
I think this statement is true at least in modern day times. The world runs on nothing but technology. People use more technology instead of old school textbooks and papers. Imagine living in a world without technology… that means no cars, no trains, no devices, no machines like your stove or printer, no lights and lots more. John Wesley is 100 percent correct with this statement. Electricity is indeed the powerhouse of the universe.
1 point
A hairdryer uses 10 A of current when plugged into a 120 V outlet. How
much power does it use?
Answer:
1200 watt
Explanation:
P= I*V=10*120=1200watt
what is the velocity of 8.01
Answer: The velocity of what?
A medieval instrument used to determine the position of the sun:
Answer: astrolabe
Explanation:
A firecracker is placed in the middle of a room. When the firecracker explodes the parts of the firecracker scatter in all different directions. The total combined momentum of all the parts of the firecracker added together after the explosion must be
A.
more than before the explosion.
B.
less than before the explosion.
C.
can not tell from the given information
D.
the same as before the explosion.
Because momentum is a vector quantity, the total combined momentum of all the parts of the firecracker added together after the explosion must be the same as before the explosion. The correct answer is D
Given that a firecracker is placed in the middle of a room. This means that the firecracker is at rest. That is its momentum is equal to zero. When the firecracker is lit up, it will move in a certain velocity before it explodes. Since the total combined momentum of all the parts of the firecracker scatter in all different directions are considered, that is added up, then momentum will always be conserved. That is,
The momentum of an object before explosion will always be equal to the momentum of the object after explosion.
Because momentum is a vector quantity, in which we must consider it magnitude and direction, the best answer to this question is option D.
That is,
The total combined momentum of all the parts of the firecracker added together after the explosion must be the same as before the explosion
Learn more here: https://brainly.com/question/1141170
An object is dropped from a building and strikes the ground with a speed of 52 m/s. How tall is the building?
Answer:
5.3 0 meter is the hight of the building is it
what does a pair of shoes weigh on mars?
Answer:
0.76 lbs (if shoes 2lbs)
Explanation:
Gravity on Mars is only ~38% as strong as it is on Earth, so objects would only weigh ~38% of their Earth weight.
Convert: 12 km/hr =
m/s
[tex]12~ \text{km} ~ \text{h}^{-1} = \dfrac{12 \times 1000}{3600} ~~ \text{m s}^{-1} = 3.33 ~~ \text{m s}^{-1}[/tex]
Answer:
3 1/3 or 3.3333....
Explanation:
You multiply the kilometres by 1,000 because there are 1,000 metres in a kilometre. Then you divide by 60 because there are 60 minutes per hour, and then again by 60 because 60 seconds per minute.
12,000 / 60 = 200
200 / 60 = 3.333
an EM wave has a wave length of 956 m, What type of electromagnetic waves is this wave
The electromagnetic spectrum allows finding the result for the question of type of electromagnetic wave has a wavelength of 956 nm
The wave is in the near infrared range.
The electromagnetic wave is an oscillation of electric fields and magnets field that sustain each other, this wave time has the characteristics that it can travel without a material medium, for which they are of extreme importance.
Consequently the spectrum of electromagnetic waves to each part has been given a different name second to its use, for example
Range Name
Ultraviolet light 200 to 400 nm
Visible light 400 to 700 nm
Infrared light (heat ) 700 nm to 1 mm
The latter is subdivided into:
Near infrared 700 nm to 1000 nm (1 μm)
Medium infrared 1 μm to 30 μm
Far infrared 50 μm to 1000 μm
It indicates that the wavelength of the measured radiation is 956 nm, therefore it is in the near infrared range.
Learn more about the electromagnetism spectrum here: brainly.com/question/23727978
If there were no dark energy in the universe, the value of __________ would solely determine the evolution and fate of the universe.
Answer:
Ωmass
Explanation:
If there were no dark energy in the universe, the value of Ωmass would determine the evolution and fate of the universe.
what 3 things make up a nucleotid
Answer:
A nucleotide consists of a sugar molecule (either ribose in RNA or deoxyribose in DNA) attached to a phosphate group and a nitrogen-containing base. The bases used in DNA are adenine (A), cytosine (C), guanine (G), and thymine (T).
If an atom has two protons and three electrons, then the atom is-?
A. positively charged.
B. negatively charged.
C. radioactive.
D. neutral.
Hope you could get an idea from here.
Doubt clarification - use comment section.
PLEASE HELP!!
NEED THIS IMMEDIATELY TODAY
NO LINKS
I WILL GIVE YOU BRAINLIEST IF YOU HELP ME!!
PLEASE HELP ASAP REALLY NEED THIS!!
(answer choices: applied force, normal force, friction, electrical force, magnetic force and gravitational force)
(question in picture)
Answer:
3
Explanation:
because they are pushing a body
Name the two sources of light.
Answer:
Natural light (Sun, stars.etc.) and Artificial light (Lamposts, televisions.etc.)
Hope that helps. x
A woman of mass 49 kg jumps off the bow
of a 78 kg canoe that is intially at rest.
If her velocity is 4.5 m/s to the right, what
is the velocity of the canoe after she jumps?
Answer in units of m/s i.
x x
The woman-canoe system has zero initial momentum. When the woman jumps from the canoe, the total momenta of the woman and canoe is conserved, so that
0 = (49 kg) (4.5 m/s) + (78 kg) v
where v is the velocity of the canoe. Solving for v, we find
(78 kg) v = - (49 kg) (4.5 m/s)
v = - 49/78 (4.5 m/s)
v ≈ -2.8 m/s
which is to say, the boat is given a velocity of 2.8 m/s to the left.
1. How much energy is needed just to melt 0.56kg of ice at 0◦ C?
2. How much energy is needed just to boil 5kg of water at 100◦ C?
3. What is the specific heat of metal if its mass is 27 g and it requires 420 J of heat energy to
increase its temperature from 25°C to 50°C?
please help me out I dont have much time
Answer:
This will require 266.9 of heat energy.
Explanation:
To calculate the energy required to raise the temperature of any given substance, here's what you require:The mass of the material, m The temperature change that occurs, ΔT The specific heat capacity of the material,
c
(which you can look up). This is the amount of heat required to raise 1 gram of that substance by 1°C.
Here is a source of values of
c for different substances:
Once you have all that, this is the equation:
Q=m×c×ΔT(Q is usually used to symbolize that heat required in a case like this.)For water, the value of c is 4.186g°C So, Q=750×4.186×85=266=858=266.858