Answer:
[tex]Kp=0.0386[/tex]
Explanation:
Hello,
In this case, the undergoing chemical reaction is:
[tex]2NO+O_2\rightleftharpoons 2NO_2[/tex]
For which the equilibrium expression is:
[tex]Kp=\frac{p_{NO_2}^2}{p_{NO}^2p_{O_2}}[/tex]
Whereas, at equilibrium, each pressure is computed in terms of the initial pressure and the reaction extent via:
[tex]p_{NO_2}=2x\\p_{NO}=522-2x\\p_{O_2}=421-x[/tex]
And the total pressure:
[tex]p_{eq}=p_{NO_2}+p_{NO}+p_{O_2}\\\\p_{eq}=2x+522-2x+421-x\\\\p_{eq}=943-x[/tex]
Yet it is 748 torr, for which the extent is:
[tex]x=943-p_{eq}=943-748\\\\x=195torr[/tex]
Therefore, Kp turns out:
[tex]Kp=\frac{(2x)^2}{(522-2x)^2(421-x)}\\\\Kp=\frac{(2*195)^2}{(522-2*195)^2(421-195)}\\\\Kp=0.0386[/tex]
Best regards.
Interpret the following equation for a chemical reaction using the coefficients given:
Cl2(g) + F2(g) 2ClF(g)
On the particulate level:
________ of Cl2(g) reacts with ______ of F2(g) to form______ of ClF(g).
On the molar level:
______ of Cl2(g) reacts with______ of F2(g) to form______ of ClF(g).
Answer and Explanation:
Given the following chemical equation:
Cl₂(g) + F₂(g) ⇒ 2ClF(g)
The coefficients are: 1 for Cl₂, 1 for F₂ and 2 for ClF. The coefficients indicate the number of units of each ompound that participates in the reaction. It gives the proportion of reactants and products in the reaction. These units can be molecules or moles. In this reaction, we can say:
On the particulate level: 1 molecule of Cl₂(g) reacts with 1 molecule of F₂(g) to form 2 molecules of ClF(g).
On the molar level: 1 mol of Cl₂(g) reacts with 1 mol of F₂(g) to form 2 mol of ClF(g).
If D+2 would react with E-1, what do you predict to be the formula?
Answer:
DE2
Explanation: for every one D+2 you need two E-1 because +2=-2
Give the major organic products from the oxidation with KMnO4 for the following compounds. Assume an excess of KMnO4.
a) ethylbenzene
b) m-Xylene (1,3- dimethylbenzene)
c) 4-Propyl-3-t-butyltoluene
Answer:
Explanation:
a ) Benzoic acid is formed . In any alkyl benzene derivative , potassium permanganate reacts to form carboxylic acid . It oxidises side chains to carboxylic acid .
C₆H₅CH₃ + 0 = C₆H₅COOH + H₂O
O is provided by KMnO₄
b ) In this reaction isophthalic acid is formed .
C₆H₄(CH₃)₂ +O = C₆H₄(COOH)₂
c)
4-Propyl-3-t-butyltoluene
In this oxidation , three side chains of ring are 1 ) 1-methyl 2 ) 3- butyl 3 ) 4 propyl .
The methyl and 4 - propyl groups are oxidised to di- carboxylic acid and 3 butyl group remains intact ( unoxidised )
Q1. Calculate the amount of copper produced in 1.0 hour when aqueous CuBr2 solution was electrolyzed by using a current of 4.50 A. Q2. In another electroplating experiment, if electric current was passed for 3 hours and 2.00 g of silver was deposited from a AgNO3 solution, what was the current used in amperes
Answer:
[tex]\boxed{\text{Q1. 3.6 g; Q2. 0.2 A}}[/tex]
Explanation:
Q1. Mass of Cu
(a) Write the equation for the half-reaction.
Cu²⁺ + 2e⁻ ⟶ Cu
The number of electrons transferred (z) is 2 mol per mole of Cu.
(b) Calculate the number of coulombs
q = It
[tex]\text{t} = \text{1.0 h} \times \dfrac{\text{3600 s}}{\text{1 h}} = \text{3600 s}\\\\q = \text{3 C/s} \times \text{ 3600 s} = \textbf{10 800 C}[/tex]
(c) Mass of Cu
We can summarize Faraday's laws of electrolysis as
[tex]\begin{array}{rcl}m &=& \dfrac{qM}{zF}\\\\& = &\dfrac{10 800 \times 63.55}{2 \times 96 485}\\\\& = & \textbf{3.6 g}\\\end{array}\\\text{The mass of Cu produced is $\boxed{\textbf{3.6 g}}$}[/tex]
Note: The answer can have only two significant figures because that is all you gave for the time.
Q2. Current used
(a) Write the equation for the half-reaction.
Ag⁺ + e⁻ ⟶ Ag
The number of electrons transferred (z) is 1 mol per mole of Ag.
(a) Calculate q
[tex]\begin{array}{rcl}m &=& \dfrac{qM}{zF}\\\\2.00& = &\dfrac{q \times 107.87}{1 \times 96 485}\\\\q &=& \dfrac{2.00 \times 96485}{107.87}\\\\& = & \textbf{1789 C}\\\end{array}[/tex]
(b) Calculate the current
t = 3 h = 3 × 3600 s = 10 800 s
[tex]\begin{array}{rcl}q&=& It\\1789 & = & I \times 10800\\I & = & \dfrac{1789}{10800}\\\\& = & \textbf{0.2 A}\\\end{array}\\\text{The current used was $\large \boxed{\textbf{0.2 A}}$}[/tex]
Note: The answer can have only one significant figure because that is all you gave for the time.
Identify the elements that have the following abbreviated electron configurations.
A) [Ne] 3s23p5.
B) [Ar] 4s23d7.
C) [Xe] 6s1.
Answer:
A) Chlorine (Cl)
B) Cobalt (Co)
C) Caesium (Cs)
Hope this helps.
The abbreviated electron configurations that was given in the question belongs to
Chlorine (Cl)
Cobalt (Co)
Caesium (Cs) respectively.
Electronic configurations can be regarded as the electronic structure, which is the way an electrons is arranged in energy levels towards an atomic nucleus.The electron configurations is very useful when describing the orbitals of an atom in its ground state.To calculate an electron configuration, we can put the periodic table into sections, and this section will represent the atomic orbitals which is the regions that house the electrons. Groups one of the period table and two belongs to s-block, group 3 through 12 belongs to the d-block, while 13 to 18 can be attributed to p-block ,The rows that is found at bottom are the f-blockTherefore, electron configurations explain orbitals of an atom when it is in it's ground state.
Learn more at:https://brainly.com/question/21940070?referrer=searchResults
A strontium hydroxide solution is prepared by dissolving 10.60 gg of Sr(OH)2Sr(OH)2 in water to make 47.00 mLmL of solution.What is the molarity of this solution? Express your answer to four significant figures and include the appropriate units.
Answer:
Approximately [tex]1.854\; \rm mol\cdot L^{-1}[/tex].
Explanation:
Note that both figures in the question come with four significant figures. Therefore, the answer should also be rounded to four significant figures. Intermediate results should have more significant figures than that.
Formula mass of strontium hydroxideLook up the relative atomic mass of [tex]\rm Sr[/tex], [tex]\rm O[/tex], and [tex]\rm H[/tex] on a modern periodic table. Keep at least four significant figures in each of these atomic mass data.
[tex]\rm Sr[/tex]: [tex]87.62[/tex].[tex]\rm O[/tex]: [tex]15.999[/tex].[tex]\rm H[/tex]: [tex]1.008[/tex].Calculate the formula mass of [tex]\rm Sr(OH)_2[/tex]:
[tex]M\left(\rm Sr(OH)_2\right) = 87.62 + 2\times (15.999 + 1.008) = 121.634\; \rm g \cdot mol^{-1}[/tex].
Number of moles of strontium hydroxide in the solution[tex]M\left(\rm Sr(OH)_2\right) =121.634\; \rm g \cdot mol^{-1}[/tex] means that each mole of [tex]\rm Sr(OH)_2[/tex] formula units have a mass of [tex]121.634\; \rm g[/tex].
The question states that there are [tex]10.60\; \rm g[/tex] of [tex]\rm Sr(OH)_2[/tex] in this solution.
How many moles of [tex]\rm Sr(OH)_2[/tex] formula units would that be?
[tex]\begin{aligned}n\left(\rm Sr(OH)_2\right) &= \frac{m\left(\rm Sr(OH)_2\right)}{M\left(\rm Sr(OH)_2\right)}\\ &= \frac{10.60\; \rm g}{121.634\; \rm g \cdot mol^{-1}} \approx 8.71467\times 10^{-2}\; \rm mol\end{aligned}[/tex].
Molarity of this strontium hydroxide solutionThere are [tex]8.71467\times 10^{-2}\; \rm mol[/tex] of [tex]\rm Sr(OH)_2[/tex] formula units in this [tex]47\; \rm mL[/tex] solution. Convert the unit of volume to liter:
[tex]V = 47\; \rm mL = 0.047\; \rm L[/tex].
The molarity of a solution measures its molar concentration. For this solution:
[tex]\begin{aligned}c\left(\rm Sr(OH)_2\right) &= \frac{n\left(\rm Sr(OH)_2\right)}{V}\\ &= \frac{8.71467\times 10^{-2}\; \rm mol}{0.047\; \rm L} \approx 1.854\; \rm mol \cdot L^{-1}\end{aligned}[/tex].
(Rounded to four significant figures.)
Un globo lleno de helio tenia un volumen de 8.5 L en el suelo a 20°C y a una presión de 750 torr. Cuando se le soltó, el globo se elevo a una altitud donde la temperatura era de -20°C y la presión de 425 torr, ¿Cuál era el volumen del gas del globo en estas condiciones?
Answer:
El volumen del gas era 12.95 L
Explanation:
Se relaciona la presión y el volumen mediante la ley de Boyle, que dice:
“El volumen ocupado por una determinada masa gaseosa a temperatura constante, es inversamente proporcional a la presión”
La ley de Boyle se expresa matemáticamente como: P*V=k
Por otro lado, la Ley de Charles consiste en la relación que existe entre el volumen y la temperatura absoluta de una cierta cantidad de gas ideal, el cual se mantiene a una presión constante. Esta ley dice que cuando la cantidad de gas y de presión se mantienen constantes, el cociente que existe entre el volumen y la temperatura siempre tendrán el mismo valor:
[tex]\frac{V}{T}=k[/tex]
Por último, la Ley de Gay Lussac dice que la temperatura absoluta y la presión son directamente proporcionales. Es decir, cuando se mantiene todo lo demás constante, mientras suba la temperatura de un gas subirá también su presión. Y mientras la temperatura del gas baje, lo mismo ocurrirá con la presión:
[tex]\frac{P}{T}=k[/tex]
Combinado las mencionadas tres leyes se obtiene:
[tex]\frac{P*V}{T} =k[/tex]
Cuando se desean estudiar dos diferentes estados, uno inicial y una final de un gas, se puede aplicar:
[tex]\frac{P1*V1}{T1} =\frac{P2*V2}{T2}[/tex]
Recordando que la temperatura debe usarse en grados Kelvin, conoces los siguientes datos:
P1: 750 torrV1: 8.5 LT1: 20°C= 293°K (siendo 0°C=273°K)P2: 425 torrV2: ?T2: -20°C= 253 °KReemplazando:
[tex]\frac{750 torr*8.5 L}{293K} =\frac{425 torr*V2}{253 K}[/tex]
Resolviendo:
[tex]V2=\frac{750 torr*8.5 L}{293K} *\frac{253 K}{425 torr}[/tex]
V2= 12.95 L
El volumen del gas era 12.95 L
Which of the following elements is in the same family as fluorine?
a. silicon
b. antimony
O c. iodine
O d. arsenic
e. None of these.
Answer:
c iodine
Explanation:
fluorine is a halogen group element like Bromine, Iodine,Astatine,Chloride
The reaction, 2 SO3(g) <--> 2 SO2(g) + O2(g) is endothermic. Predict what will happen if the temperature is increased.
Explanation:
This reaction is in equilibrium and would hence obey lechatelier's principle. This principle states that whenever a system at equilibrium undergoes a change, it would react in way so as to annul that change.
Since it is an endothermic reaction, increasing the temperature would cause the reaction to shift towards the right.
This means that it favours product formation and more of the product would be formed.
The accepted value of the number of Liters of gas in a mole is 22.4. List two possible reasons on why our experiment yielded a different value for the number of Liters in a mole of a gas.
Hint: Our experiment was conducted in July, in St. Paul, Minnesota.
Answer:
- Pressure in St. Paul, Minnesota
- Temperature in St. Paul, Minnesota
Explanation:
22.4 L or dm³ is the volume for a gas under Standard pressure and temperature conditions.
It is logically to say, that tempereature value at the day of the experiment was not 273.15 K, which is 32°F
We can say, that the pressure was not 1 atm. St Paul Minnesota has a minimum, but a little height, so the pressure differs by few figures from the standard pressure values.
We also have to mention, that 22.4 L is the value for the Ideal gases at standards conditions. Ideal gases does not exisist on practice, we always talk about real gases. Don't forget the Ideal Gases Law equation:
P . V = n . R . T
Pressure . Volume = number of moles . 0.082 L.atm /mol. K . 273.15K
Number of moles must be 1 at STP, to determine a volume of 22.4L
Draw a Lewis structure for one important resonance form of HBrO4 (HOBrO3). Include all lone pair electrons in your structure. Do not include formal charges in your structure.
Answer:
The Lewis structure is attached with the answer -
Explanation:
Lewis structure or Lewis dot diagram are diagrams or representation of showing the bonding between different or same atoms of a molecule in any and also shows lone pairs of electrons that may exist in the molecule as dots.
HBrO₄ is bromine oxoacid which is also known as perbromic acid. It is a unstable inorganic compound.
The Lewis structure is attached in form of image with representation of lone pairs of electrons.
Draw the structure of 1,4-hexanediamine.
Draw the molecule on the canvas by choosing buttons from the Tools (for bonds), Atoms, and Advanced TemplateTowbars. The single bond is active by default. Include all hydrogen atoms.
View Available Hint(s)
Answer:
1,4-hexanediamine contains two [tex]-NH_{2}[/tex] functional groups.
Explanation:
1,4-hexanediamine is an organic molecule which contains two [tex]-NH_{2}[/tex] functional groups at C-1 and C-4 position.
The longest carbon chain in 1,4-hexanediamine contains six carbon atoms.
Molecular formula of 1,4-hexanediamine is [tex]C_{6}H_{16}N_{2}[/tex].
1,4-hexanediamine used as a bidentate ligand in organometallic chemistry.
The structure of 1,4-hexanediamine is shown below.
The heat of vaporization of 1-pentanol is 55.5 kJ/mol, and its entropy of vaporization is 148 J/K.mol. What is the approximate boiling point of 1-pentanol? 100 oC 375 oC 0 oC 25 oC
Answer:
Approximately 100 °C.
Explanation:
Hello,
In this case, since the entropy of vaporization is computed in terms of the heat of vaporization and the temperature as:
[tex]\Delta S_{vap}=\frac{\Delta H_{vap}}{T}[/tex]
We can solve for the temperature as follows:
[tex]T=\frac{\Delta H_{vap}}{\Delta S_{vap}}[/tex]
Thus, with the proper units, we obtain:
[tex]T=\frac{55500J/mol}{148J/(mol*K)} =375K\\\\T=102 \°C[/tex]
Hence, answer is approximately 100 °C.
Best regards.
What is titration? Question 1 options: The process of quickly adding one solution to another until a solid is formed. The process of slowly adding one solution to another until the reaction between the two is complete. The process of mixing equal volumes of two solutions to observe the reaction between the two. The process of combining two solids until the reaction between the two is complete.
Answer:
The process of slowly adding one solution to another until the reaction between the two is complete.
Explanation:
When you perform a titration, you are slowly adding one solution of a known concentration called a titrant to a known volume of another solution of an unknown concentration until the reaction reaches neutralization, in which the reaction is no longer taking place. This is often indicated by a color change.
Hope that helps.
Determine the volume occupied by 10 mol of helium at 27 ° C and 82 atm
please.
Answer:
3.00 L
Explanation:
Convert the pressure to Pascals.
P = 82 atm × (101325 Pa/atm)
P = 8,308,650 Pa
Convert temperature to Kelvins.
T = 27°C + 273
T = 300 K
Use ideal gas law:
PV = nRT
(8,308,650 Pa) V = (10 mol) (8.314 J/mol/K) (300 K)
V = 0.00300 m³
If desired, convert to liters.
V = (0.00300 m³) (1000 L/m³)
V = 3.00 L
Answer:
[tex]\large \boxed{\text{3.0 L}}[/tex]
Explanation:
[tex]\begin{array}{rcl}pV &=& nRT\\\text{82 atm} \times V & = & \text{10 mol} \times \text{0.082 06 L}\cdot\text{atm}\cdot\text{K}^{-1}\text{mol}^{-1} \times \text{300.15 K}\\82V & = & \text{246 L}\\V & = & \textbf{3.0 L} \\\end{array}\\\text{The volume of the balloon is $\large \boxed{\textbf{3.0 L}}$}[/tex]
Write electron configurations for the following ion: Cd2 Cd2 . Express your answer in order of increasing orbital energy. For example, the electron configuration of LiLi would be entered in complete form as 1s^22s^1 or in condensed form as [He]2s^1.
Answer:
Cd2+ : 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 4d10 or [Kr] 4d¹⁰
Explanation:
Before proceeding to write out the electron configuration of Cd2+, we have to obtain the electron configuration of Cadmium (Cd),
Cadmium has an atomic number of 48, this means that a neutral cadmium atom will have a total of 48 electrons surrounding its nucleus.
The electronic configuration of Cadmium is;
Cd: 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10
The shorthand notation is given as;
Cd: [Kr] 4d¹⁰5s²
Cd2+ means that it has two less electrons, hence it's electron configuration is given as;
Cd2+ : 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 4d10 or [Kr] 4d¹⁰
When alkanes react with chlorine in the presence of ultraviolet light, chlorine atoms substitute for one or more alkane hydrogen atoms. What is the number of different chloroalkane compounds that can be formed by the reaction of C2H6 with chlorine?
Answer:
6
Explanation:
Alkanes undergo substitution reaction so the number of replacement reaction hydrogen is 6
A base solution contains 0.400 mol of OH–. The base solution is neutralized by 43.4 mL of sulfuric acid. What is the molarity of the sulfuric acid solution?
Answer:
Molarity of the sulfuric acid solution is 4.61M
Explanation:
The neutralization of a base of OH⁻ with sulfuric acid, H₂SO₄, occurs as follows:
2 OH⁻ + H₂SO₄ → 2H₂O + SO₄²⁻
That means, 2 moles of base react with 1 mole of sulfuric acid.
If you add 0.400 moles of OH⁻, moles of sulfuric acid you need to neutralize this amount of OH⁻ are:
0.400 moles OH⁻ ₓ (1 mole H₂SO₄ / 2 moles OH⁻) = 0.200 moles of H₂SO₄
As you add 43.4mL = 0.0434L of sulfuric acid to neutralize this solution, molarity (Ratio between moles and liters) is:
0.200 moles H₂SO₄ / 0.0434L = 4.61M
Molarity of the sulfuric acid solution is 4.61MContent attribution
QUESTION 2 • 1 POINT
Which anion would bond with K+ in a 1: 1 ratio to form a neutral ionic compound?
The given question is incomplete. The complete question is :
Which anion would bond with K+ in a 1: 1 ratio to form a neutral ionic compound?
a) [tex]O^{2-}[/tex]
b) [tex]F^{-}[/tex]
c) [tex]N^{3-}[/tex]
d) [tex]S^{2-}[/tex]
Answer: b) [tex]F^{-}[/tex]
Explanation:
For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.
Here potassium is having an oxidation state of +1 called as cation and thus is an anion must have an oxidation state of -1 if they have to combine in 1: 1 ratio to give neutral ionic compound.
Thus the anion has to be [tex]F^-[/tex] which combines with [tex]K^+[/tex] in 1: 1 ratio to give [tex]KF[/tex]
The equilibrium between carbon dioxide gas and carbonic acid is very important in biology and environmental science. CO2 ( aq) + H2O ( l) H2CO3 ( aq) Which one of the following is the correct equilibrium constant expression (K c) for this reaction?
a) K =[H2CO3]/ [CO2]
b) K=[CO2]/ [H2CO3]
c) K=[H2CO3]/ [CO2][H2O]
d) K=[CO2][H2O]/ [H2CO3]
e) K=1/[H2CO3]
Answer:
Kc = [H₂CO₃] / [CO₂]
Explanation:
Equilibrium constant expression (Kc) of any reaction is defined as the ratio between molar concentrations in equilibrium of products over reactants.
Pure solids and liquids don't affect the equilibrium and you don't have to take its concentrations in the equilibrium.
Also, each specie must be powered to its reactant coefficient.
For example, for the reaction:
aA(s) + bB(aq) ⇄ cC(l) + nD(g) + xE(aq)
The equilibrium constant, kc is:
Kc = [D]ⁿ / [B]ᵇ[E]ˣ
You don't take A nor C species because are pure solids and liquids. b, n and x are the reactant coefficients of each substance. Ratio of products over reactants
Thus, for the reaction:
CO₂(aq) + H₂O(l) ⇄ H₂CO₃(aq)
The Kc is:
Kc = [H₂CO₃] / [CO₂]
Solid sodium oxide and gaseous water are formed by the decomposition of solid sodium hydroxide (NaOH) .
Write a balanced chemical equation for this reaction.
Answer:
2NaOH(s) → Na₂O(s) + H₂O(g)
Hope that helps.
1. In this experiment, the procedure instructs you to dissolve solid potassium hydrogen tartrate (KHT) in two different solvents. What are these two solvents? (2 pts)
Answer:
Water
Explanation:
Solid potassium hydrogen tartrates (KHT) is soluble in water. This is especially at room temperature.
The solvent for KHT is water.
A molecule of aluminum fluoride has one aluminum atom. How many fluorine atoms are present?
Answer:
3 fluorine atoms will be present
Answer:
3
Explanation:
The chemical formula of aluminum fluoride is AlF3. As you can see, there is a 1:3 ratio of aluminum atoms to fluorine atoms. Therefore, if a molecule of AlF3 has one aluminum atom, you know there must be 3 fluorine atoms present.
If you want further tutoring help in chemistry or other subjects for FREE, check out growthinyouth.org.
Using the periodic table provided, identify the atomic mass of sodium (Na) . Your answer should have 5 significant figures. Provide your answer below: __ amu
Answer:
Your answer will either be 22.9897 or 22.990 !!
Explanation:
If a bottle of olive oil contains 1.2 kg of olive oil, what is the volume, in milliliters (mL), of the olive oil?
Answer:
1.3 mL
Explanation:
First, get the density of the olive oil, which is 0.917 kg/mL. Then divide the mass by the density:
1.2kg/0.917kg/mL= 1.3086150491 mL. The kg cancel out, leaving us with mL.
It should have 2 significant figures, because 1.2kg has 2 and we are dividing.
The volume of olive oil will be nearly 1300mL or 1.30 L as per the given data.
What is volume?Volume is a measurement of three-dimensional space that is occupied. It is frequently numerically quantified using SI derived units or various imperial units. The definition of length is linked to the definition of volume.
Volume is, at its most basic, a measure of space. The units liters (L) and milliliters (mL) are used to measure the volume of a liquid, also known as capacity.
This measurement is done with graduated cylinders, beakers, and Erlenmeyer flasks.
Here, it is given that mass of olive oil is 1.2kg.
We know that,
Density of olive oil = 0.917kg/l.
Volume = mass/density
Volume = 1.2/0.917.
Volume = 1.30 lit.
Volume = 1300mL.
Thus, the volume of olive oil will be 1300 mL.
For more details regarding volume, visit:
https://brainly.com/question/1578538
#SPJ2
The volume of a sample of oxygen is 300mL when the pressure is 1 atm and the temperature is 27 C . At what temperature is the volume 1.00 L and the pressure.500 atm?
Answer:
T2 = 500K
Explanation:
Given data:
P1 = 1atm
V1 = 300ml
T1= 27 + 273 = 300K
T2 = ?
V2 = 1.00ml
P2 = 500atm
Apply combined law:
P1xV1//T1 = P2xV2/T2 ...eq1
Substituting values into eq1:
1 x 300/300 = 500 x 1/T2
Solve for T2:
300T2 = 500 x 300
300T2 = 150000
Divide both sides by the coefficient of T2:
300T2/300 = 150000/300
T2 = 500K
Draw the Lewis structure for methane (CH4) and ethane (C2H6) in the box below. Then predict which would have the higher boiling point. Finally, explain how you came to that conclusion.
Answer:
Ethane would have a higher boiling point.
Explanation:
In this case, for the lewis structures, we have to keep in mind that all atoms must have 8 electrons (except hydrogen). Additionally, each carbon would have 4 valence electrons, with this in mind, for methane we have to put the hydrogens around the carbon, and with this structure, we will have 8 electrons for the carbon. In ethane, we will have a bond between the carbons, therefore we have to put three hydrogens around each carbon to obtain 8 electrons for each carbon.
Now, the main difference between methane and ethane is an additional carbon. In ethane, we have an additional carbon, therefore due to this additional carbon, we will have more area of interaction for ethane. If we have more area of interaction we have to give more energy to the molecule to convert from liquid to gas, so, the ethane will have a higher boiling point.
I hope it helps!
The Lewis structure shows the valence electrons in a molecule. Ethane will have a higher boiling point than methane.
We can deduce the number of valence electrons in a molecule by drawing the Lewis structure of the molecule. The Lewis structure consists of the symbols of elements in the compound and the valence electrons in the compound.
We know that the higher the molar mass of a compound the greater its boiling point. Looking at the Lewis structures of methane and ethane, we cam see that ethane has a higher molecular mass (more atoms) and consequently a higher boiling point than methane.
Learn more: https://brainly.com/question/2510654
What states can electrons exist in? A. Electron clouds or energy levels B. Positive and negative C. Up and down spin D. In phase and out of phase
Answer:
A. Electron clouds or energy levels
Explanation:
Electrons can exist in two states:
Stablized in electronic orbitalsFreely movingElectrons can exist in an electron cloud or energy level. Electron in an atoms have ability to change energy levels either by emitting or absorbing a photon that form the energy equal to the energy difference between the two levels.
Hence, the correct answer is A.
Answer:
Up and DOWN spin
Explanation:
A diode has IS = 10−17 A and n = 1.05. (a) What is the diode voltage if the diode current is 70 μA? (b) What is the diode current for VD = 0.1 mV?
Answer:
(a) The diode voltage, [tex]V_D =[/tex] 0.776 V
(b) The diode current, [tex]I_D =[/tex] 3.81 x 10⁻²⁰ A
Explanation:
Given;
saturation current in diode, [tex]I_s[/tex] = 10⁻¹⁷ A
nonideality factor, n = 1.05
(a) the diode voltage
Given diode current, [tex]I_D[/tex] = 70 μA = 7 x 10⁻⁶ A
Diode voltage is calculated as;
[tex]V_D = nV_Tln(1+ \frac{I_D}{I_S} )[/tex]
Where;
[tex]V_T[/tex] is thermal voltage at 25°C = 0.025
[tex]V_D = 1.05 * 0.025 ln(1+ \frac{70*10^{-6}}{1*10^{-17}})\\\\V_D = 0.02625ln(1+ 7*10^{12})\\\\V_D = 0.776 \ V[/tex]
b) the diode current for VD = 0.1 mV
[tex]V_D = nV_Tln(1 +\frac{I_D}{I_S} )\\\\ln(1 +\frac{I_D}{I_S} ) = \frac{V_D}{nV_T} \\\\ln(1 +\frac{I_D}{I_S} ) = \frac{0.1*10^{-3}}{1.05*0.025} \\\\ln(1 +\frac{I_D}{I_S} ) = 0.00381\\\\1 +\frac{I_D}{I_S} = e^{0.00381}\\\\1+ \frac{I_D}{I_S}= 1.00381\\\\ \frac{I_D}{I_S}=1.00381 - 1\\\\ \frac{I_D}{I_S}= 0.00381\\\\I_D = 0.00381(I_S)\\\\I_D = 0.00381(10^{-17})\\\\I_D = 3.81*10^{-20} \ A[/tex]
AB2AB2 has a molar solubility of 3.72×10−4 M3.72×10−4 M. What is the value of the solubility product constant for AB2AB2? Express your answer numerically.
Answer:
Ksp = 2.06x10⁻¹⁰
Explanation:
For AB₂. solubility product constant, Ksp, is written as follows:
AB₂(s) ⇄ A²⁺ + 2Br⁻
Ksp = [A²⁺] [Br⁻]²
Molar solubility represents how many moles of AB₂ are soluble per liter of solution. and is obtained from Ksp:
AB₂(s) ⇄ A²⁺ + 2Br⁻
AB₂(s) ⇄ X + 2X
where X are moles that are soluble (Molar solubility)
Ksp = [X] [2X]²
Ksp = 4X³As molar solubility of the salt is 3.72x10⁻⁴M:
Ksp = 4X³
Ksp = 4(3.72x10⁻⁴)³
Ksp = 2.06x10⁻¹⁰