A refrigerator is 1.8m tall, lm wide,and 0.8m deep.The center of mass is lm from the bottom, 0.5m from the side, and 0.6m from the front. it weighs 1300N. When pushing it back into its position in the kitchen, you must push on the front side. If you push horizontally from a height of 1.5m above the bottom, what is the maximum pushing force you can exert to avoid tipping the refrigerator

Answer:

1.) 10.61 A

2.) 0.27 A

Explanation:

Given that a sinusoidal A.C has a maximum value of 15A.

1) What are its r.m.s values?

ii) If the time is recorded from the instant the current is zero and is becoming

positive, what is the instantaneous value of the current after 1/300s, given the

frequency is 50 Hz.​

Solution.

1.)

The r.m.s current = peak current/root 2

The r.m.s current = 0.7071 × 15

The r.m.s current = 10.61 A

2.)

Given that

Time = 1/300 s

Frequency = 50 Hz

Instantaneous current can be calculated by using the formula

I = I sin wt

Where w = 2πf

Instantaneous current = 15( sin 2πft)

I = 15 × sin ( 2 × 3.143 × 50 × 1/300 )

I = 15 × sin ( 1.047 )

I = 15 × 0.01827

I = 0.27 A

Therefore, the instantaneous current is 0.27A

Answer:

Instantaneous velocity  [tex]= 20[/tex] meter per second

Instantaneous acceleration  [tex]= 6[/tex] meter per second square

Explanation:

Given equation of distance X = [tex]2t+3t^2[/tex]

Instantaneous velocity [tex]= \frac{dX}{dt}[/tex]  [tex]= 2 + 6 t[/tex]

Substituting the value of t = 3 seconds, we get -

[tex]\frac{dX}{dt} = 2 + 6*3 = 20[/tex] meter per second

Instantaneous acceleration  [tex]= \frac{d^2X}{dt^2}[/tex]  [tex]= 6[/tex] meter per second square

Answer:

Option D: 1

Explanation:

The chemical equation given is;

2NaCl = 2Na + XCl2

We want to find the value of X.

On the left hand side, we can see we have 2 moles of both Na and Cl.

On the right hand side, we can see that we have 2 moles of Na and also 2 moles of Cl. Thus, the equation is balanced and as such X = 1

Answer:

because they conduct heat and electricity and vibrate the neighboring molecules

plz mark me branliest

Answer:

DNA ligase

Explanation:

DNA Ligase is the enzyme that binds fragments of DNA together by forming two phosphodiester bonds between the 3' hydroxyl end of one nucleotide with the 5' phosphate end of the other. This reaction requires the hydrolysis of ATP.

Answer:

100 milliliters

Explanation:

Answer:

The gunner must apply 240 N  to the gun to stop it from moving back.

Explanation:

cold, dry, and stable air masses .

Answer

1.0/5

4

IlaMends

Ambitious

2.1K answers

12.9M people helped

Explanation:

When pH of the solution is 11.

..(1)

At pH = 11, the concentration of ions is .

When the pH of the solution is 6.

..(2)

At pH = 6, the concentration of ions is .

On dividing (1) by (2).

The ratio of hydrogen ions in solution of pH equal to 11 to the solution of pH equal to 6 is .

Difference between the ions at both pH:

This means that Hydrogen ions in a solution at pH = 7 has ions fewer than in a solution at a pH = 6

1.) 0.00000000001

2.) 0.001

3.) 0.00000001: 1, OR  1: 100,000,000

- Chilio

Answer:

θ = 22.2

Explanation:

This is a diffraction exercise

        a sin θ = m λ

The extension of the third zero is requested (m = 3)

They indicate the wavelength  λ = 630 nm = 630 10⁻⁹ m and the width of the slit  a = 5 10⁻⁶ m

         sin  θ = m λ / a

         sin  θ = 3 630 10⁻⁹ / 5 10⁻⁶

         sin  θ = 3.78 10⁻¹ = 0.378

          θ = sin⁻¹  0.378

to better see the result let's find the angle in radians

          θ = 0.3876 rad

let's reduce to degrees

         θ = 0.3876 rad (180º /π rad)

         θ = 22.2º

Answer:

A.

Explanation:

Some of these photons are absorbed by the atoms in the ground state and the photons are lost to the laser process. However, some photons cause stimulated emission in excited-state atoms, releasing another coherent photon. In effect, this results in optical amplification

Answer:

[tex]6.28\times 10^{-5}\ \text{T}[/tex]

[tex]1.92\times 10^{-6}\ \text{Nm}[/tex]

Explanation:

[tex]\mu_0[/tex] = Vacuum permeability = [tex]4\pi 10^{-7}\ \text{H/m}[/tex]

[tex]I_l[/tex] = Current in circular loop = 13 A

[tex]r_l[/tex] = Radius of circular loop = 13 cm

[tex]N[/tex] = Number of turns = 58

[tex]r_c[/tex] = Radius of coil = 0.94 cm

[tex]I_c[/tex] = Current in coil = 1.9 A

[tex]\theta[/tex] = Angle between loop and coil = [tex]90^{\circ}[/tex]

Magnitude of magnetic field in circular loop

[tex]B_l=\dfrac{\mu_0I_l}{2r_l}\\\Rightarrow B_l=\dfrac{4\pi 10^{-7}\times 13}{2\times 13\times 10^{-2}}\\\Rightarrow B_l=6.28\times 10^{-5}\ \text{T}[/tex]

The magnetic field produced by the loop at its center is [tex]6.28\times 10^{-5}\ \text{T}[/tex].

Torque is given by

[tex]\tau=\pi NI_cr_c^2B_l\sin\theta\\\Rightarrow \tau=\pi 58\times 1.9\times (0.94\times 10^{-2})^2\times 6.28\times 10^{-5}\sin90^{\circ}\\\Rightarrow \tau=1.92\times 10^{-6}\ \text{Nm}[/tex]

The torque on the coil due to the loop [tex]1.92\times 10^{-6}\ \text{Nm}[/tex].

Answer:

The first answer is correct.  All of the other options include sound, which travels by material force, and can not be transmitted in a vacuum.  Infra-red, radio, and microwaves are all different frequencies of light, and can thus travel through a vacuum.

Answer:

Energy: The ability to do work

Kinetic energy: Kinetic energy is the energy an object has due to its motion

Potential energy: potential energy is the energy that is stored in an object

Work: Work is the transfer of energy by a force acting on an object as it is displaced

Friction: Friction acts as a resisting force which is generated , when two solid surfaces slide against one another

From the diagram, the fossil of fish is considered the oldest fossil. Because the oldest fossils are formed at the bottom whereas the others are at the top of the soil.

When living organisms like plants, animals, and human beings are died, their  bodies get buried in the form of sediments in the sand, rock water bodies, etc..,

It also includes the preserved remains of life for more than 10,000 years. It is the preserved remains, sediments, and impressions to trace the life of the organisms and their behavior.

When living organisms died and are buried in sand or mud, the tissues of living organisms get decomposed leaving the bones which is harder. After the organisms are buried in the sand or mud, several sediments, and sand was built over the top of the buried organisms.

These sand and sediments over the buried organisms eventually form the layer of rocks. This is how fossils are made and these fossils were identified when the rocks were broken or by cause of soil erosion.

The age of the fossils was identified by the stacks of layered rocks with the help of the superposition principle. The oldest fossils are present at the bottom of the rocks whereas the youngest fossils are present at the top of the rocks. This process is called Relative dating.

Hence, from the given diagram the fossil of fish is present at the bottom of the rock unlike the others fossils like monkeys and lizard. Thus, the oldest fossil is fish and the youngest one is a monkey.

To learn more about the Fossils:

https://brainly.com/question/31419516

#SPJ2

Answer:

-40 degrees

Explanation:

I just took the Temperature Quiz and got it right. :)

Answer:

A. Trial and error

Explanation:

Trial and error method is a method adopted when trying to solve a quadratic equation. This equation is mostly the balancing of the right hand side and the left hand side in-order to form a unique point or to equate to zero when one is subtracted from the other. In trail and error method, the coefficients is used to determine when the actual equation is balanced and the likely answer it should be if the equation is expanded through multiplication method.

Answer:

i think is c

Explanation:

Answer:

C

Explanation:

C makes more sense than D, Because it says the minimum value is when it stays at rest.

Answer:the wave lengths are shorter and faster

Explanation:

Plato

Hmmmm, you either tell your parent, try to fix it, or blame it on the dog with a baseball bat that always comes on your yard and tries to eat you.

o(*￣▽￣*)ブ

Answer:

Drink water

Make your find fresh by doing the stuff you love too ❤️

Answer:

2000 N.

Explanation:

From the question given above, the following data were obtained:

Load (L) = 8000 N

Mechanical advantage (MA) = 4

Effort (E) =?

The mechanical advantage of a machine is simply defined as:

Mechanical advantage = Load / Effort

MA = L / E

With the above formula, we can obtain the effort used to raise the load of 8000 N as follow:

Load (L) = 8000 N

Mechanical advantage (MA) = 4

Effort (E) =?

MA = L / E

4 = 8000 / E

Cross multiply

4 × E = 8000

Divide both side by 4

E = 8000 / 4

E = 2000 N

Thus, the effort used to raised the load is 2000 N.

Answer:

1)   λ = 24.7 cm,  2) f = 13.88 Hz, 3)  L = 117.3 cm

Explanation:

1) This is a resonance process, that is, the wave going downwards will interfere with the wave going upwards.

This is a tube with one end closed and the other open, at the closed end there is a node and at the open end a belly, so the resonances are

       L = λ / 4

       λ = 4L                     1st harmonic

       λ = 4L / 3                third harmonic

       λ = 4L / 5                fifth harmonic

       λ = 4L / n ’              n’ odd number   n ’= (2n +1)

the wavelength is requested for the eighth resonance n = 8, the corresponding prime number is

          n ’= 2 8 +1

          n ’= 17

we substitute

     λ = 4 105/17

     λ = 24.7 cm

2) the speed of the wave is related to the wavelength and frequency

          v =   λf

          f = v /λ

          f = 343 / 24.7

          f = 13.88 Hz

3) the next resonance occurs for n = 9, so the prime number is

         n ’= 2 9 +1

         n ’= 19

         L = n’ λ / 4

         L = 19 λ / 4  

We must suppose a value for the wavelength, if the wavelength is present in the tube and the length of the column increases, the resonance number increases

         L = 19 24.7/4

         L = 117.3 cm

Explanation:

When there is a high frequency sound the speed of the vibrations is faster and makes a high pitch sound. When there is a low frequency sound the speed of the vibrations is slower and makes a lower pitch sound.

Answer:

LEKWKKAKDJFKWNFKWFF

Explanation:

INLOVE THE WORDS U USE THERE

Answer:

The acceleration of an object depends directly upon the net force acting upon the object, and inversely upon the mass of the object. As the force acting upon an object is increased, the acceleration of the object is increased. As the mass of an object is increased, the acceleration of the object is decreased.

Explanation:

hope it helps pls give me brainless

Answer:

 v = 4.8 10⁻⁴ m / s

Explanation:

To solve this exercise we can use the concepts of energy. In this case the potential energy is transformed into kinetic energy

          U = K

          q V = ½ m v²

          v = [tex]\sqrt { \frac{2qV}{m} }[/tex]

in the exercise they indicate the value of the charge q₁ = 1 pC = 1 10⁻¹² C

let's calculate

          v = [tex]\sqrt{ \frac{2 \ 1 \ 10^{-12} 120 \ 10^3}{500 ^{2} }[/tex]

          v = 4.8 10⁻⁴ m / s

Answer:

[tex]5.896\times 10^{-7}\ \text{m}[/tex]

Explanation:

D = Distance of the screen from the light source = 2.2 m

d = Distance between slits = 0.46 mm

m = Order

Distance between adjacent bright fringes is 2.82 m

[tex]y_{m+1}-y_m=2.82\ \text{mm}\\\Rightarrow \dfrac{D(m+1)\lambda}{d}-\dfrac{Dm\lambda}{d}=2.82\times 10^{-3}\\\Rightarrow \dfrac{D\lambda}{d}(m+1-m)=2.82\times 10^{-3}\\\Rightarrow \lambda=\dfrac{d}{D}2.82\times 10^{-3}\\\Rightarrow \lambda=\dfrac{0.46\times 10^{-3}\times 2.82\times 10^{-3}}{2.2}\\\Rightarrow \lambda=5.896\times 10^{-7}\ \text{m}[/tex]

The wavelength of the light that falls on the slits is [tex]5.896\times 10^{-7}\ \text{m}[/tex].