a rocket is launched vertically upward from earth's surface at a speed of 5.5 km/s k m / s . part a what is its maximum altitude?

Answer:

Speed of Skater = 8.16 m/s

Explanation:

Using kinetic energy:

[tex]M_{t} = M_{skater} + m_{ball}\\\frac{1}{2}M_{t}V_{i}^2 = \frac{1}{2}*M*V_{s} ^2+\frac{1}{2}*m*V_{b}^2\\ M_{t}V_{i}^2 = M_{s}*V_{s} ^2+m_{b}*V_{b}^2\\M_{t}V_{i}^2-m_{b}*V_{b}^2 = M_{s}*V_{s} ^2\\(M_{t}V_{i}^2-m_{b}*V_{b}^2)/M_{s} = V_{s} ^2\\V_{s} = \sqrt{\frac{(M_{t}V_{i}^2-m_{b}*V_{b}^2)}{M_{s}} } \\[/tex]

This gives the skater a velocity of 8.16 m/s after throwing the ball

The pictures taken by the Huygens probe during its descent to Titan's surface in 2005 revealed an alien world that was strikingly different from Earth.

The images depicted a gloomy, brownish-grey environment with few discernible features, such as hills and craters, as well as long, twisting channels that resembled rivers.

The atmosphere of Titan, which was primarily made of nitrogen and methane, was also captured in a number of photographs by the probe. The images also revealed the presence of multiple liquid ethane and methane lakes and seas on Titan's surface, which are thought to be the result of yearly downpours.

A substance that may be some sort of biological material was also spotted by the probe's camera on Titan's surface.

Lastly, the images revealed a distinctive landscape of ridges and furrows that are thought to be the product of recent cryovolcanic activity.

Complete Question:

The Huygens probe took numerous pictures as it descended to Titan's surface in 2005. What did the pictures show?

To learn more about Earth visit:

https://brainly.com/question/72250

#SPJ4

The magnitude of the average angular acceleration of the fan is 2.24 rad/s2 . So the correct answer is option: b.

The average angular acceleration can be calculated using the formula:

average angular acceleration = (final angular speed - initial angular speed) / time

Plugging in the given values, we get:

average angular acceleration = (4.4 rad/s - 10 rad/s) / 2.50 s

average angular acceleration = -2.56 rad/s2

Note that the negative sign indicates that the angular acceleration is in the opposite direction to the initial angular velocity.

|average angular acceleration| = 2.56 rad/s2 ≈ 2.24 rad/s2 .

Therefore, the correct answer is (b).

To know more about magnitude, here

brainly.com/question/14452091

#SPJ4

The proton experiences an acceleration of [tex]$6.60\times10^{10} \text{m/s}^2$[/tex] in a uniform electric field of 691 N/C, and it takes [tex]$3.48\times10^{-5}$[/tex] s to reach a velocity of [tex]$2.30\times10^{6}$[/tex] m/s. During this time, the proton travels a distance of [tex]$4.36\times10^{-10}$[/tex] m and has a kinetic energy of [tex]$3.07\times10^{-12}$[/tex] J.

(a) The magnitude of the acceleration experienced by the proton can be determined by using the equation for the force on a charged particle in an electric field, which is F = qE, where F is the force, q is the charge of the particle, and E is the electric field strength. For a proton, the charge is equal to the fundamental charge, which is [tex]$1.602\times10^{-19} \text{C}$[/tex]. Therefore, the force on the proton is [tex]$F = (1.602\times10^{-19} \text{C})(691 \text{N/C}) = 1.106\times10^{-16} \text{N}$[/tex]

The acceleration of the proton can be determined using the equation F = ma, where m is the mass of the proton. Thus, [tex]$a = F/m = \dfrac{1.106\times10^{-16} \text{N}}{1.6726\times10^{-27} \text{kg}} = 6.60\times10^{10} \text{m/s}^2$[/tex].

(b) To find the time it takes for the proton to reach the given speed, we can use the kinematic equation v = u + at, where u is the initial velocity (which is 0 m/s), v is the final velocity ([tex]$2.30\times10^{6} \text{m/s}$[/tex]), a is the acceleration ([tex]$6.60\times10^{10} \text{m/s}^2$[/tex]), and t is the time. Rearranging this equation gives [tex]$t = \dfrac{v-u}{a} = \dfrac{2.30\times10^{6} \text{m/s}}{6.60\times10^{10} \text{m/s}^2} = 3.48\times10^{-5} \text{s}$[/tex].

(c) The distance the proton has moved in this time interval can be calculated using the kinematic equation [tex]$s = ut + \dfrac{1}{2}at^2$[/tex], where s is the distance traveled. Substituting the known values, we get [tex]$s = \dfrac{1}{2}(6.60\times10^{10} \text{m/s}^2)(3.48\times10^{-5} \text{s})^2 = 4.36\times10^{-10} \text{m}$[/tex]

(d) The kinetic energy of the proton can be calculated using the equation [tex]$KE = \dfrac{1}{2}mv^2$[/tex], where KE is the kinetic energy, m is the mass of the proton, and v is the velocity of the proton. Substituting the known values, we get [tex]$KE = \dfrac{1}{2}(1.6726\times10^{-27} \text{kg})(2.30\times10^{6} \text{m/s})^2 = 3.07\times10^{-12} \text{J}$[/tex].

To learn more about acceleration

https://brainly.com/question/12550364

#SPJ4

After switch S is closed, the capacitors in the circuit start to discharge.

The initial stored energy in the capacitors is given by [tex]1/2*C*V^2[/tex],

where C is the capacitance of the capacitors and V is the initial voltage across them.

As the capacitors discharge, the voltage across them decreases and so does the stored energy.

When the capacitors have lost 80.0% of their initial stored energy, the voltage across them will be 0.447 times the initial voltage.

At this point, the current in the circuit can be calculated using Ohm's law, which states that the current is equal to the voltage divided by the total resistance of the circuit.

Therefore, the current in the circuit at this point can be calculated as I = V/R, where V is the voltage across the capacitors and R is the total resistance of the circuit.

For more such answers on Capacitance
https://brainly.com/question/16998502

#SPJ11

One should drink a lot of water to maximise evaporative water loss in order to make a day walk in the Mojave Desert, where the temperature is 49 degrees Celsius, not fatal.

This will support hydration levels maintenance and temperature control. Wearing loose, light-colored clothing, taking breaks in the shade, and taking off your shirt to promote radiative heat loss can also help reduce surface area to maximise convection. However, it is not advised to take aldosterone-suppressing medication without a doctor's supervision.

Human physiology, which is covered in PSIO 305, teaches students how the body functions in various situations. The body may be subjected to intense heat in the Mojave Desert, which can cause dehydration and disorders associated with heat. Staying hydrated and controlling body temperature through sweating and evaporative water loss are crucial to avoiding this. Reduce heat absorption by dressing appropriately, taking rests in the shade, and using air conditioning. Aldosterone is a hormone that controls electrolyte balance; nevertheless, taking medicine to inhibit it might have consequences and is not advised without a doctor's supervision.

learn more about temperature here:

https://brainly.com/question/7323169

#SPJ11

One should drink a lot of water to maximise evaporative water loss in order to make a day walk in the Mojave Desert, where the temperature is 49 degrees Celsius, not fatal.  Option d.

This will support hydration levels maintenance and temperature control. Wearing loose, light-colored clothing, taking breaks in the shade, and taking off your shirt to promote radiative heat loss can also help reduce surface area to maximise convection. However, it is not advised to take aldosterone-suppressing medication without a doctor's supervision.

Human physiology, which is covered in PSIO 305, teaches students how the body functions in various situations. The body may be subjected to intense heat in the Mojave Desert, which can cause dehydration and disorders associated with heat. Staying hydrated and controlling body temperature through sweating and evaporative water loss are crucial to avoiding this.

Reduce heat absorption by dressing appropriately, taking rests in the shade, and using air conditioning. Aldosterone is a hormone that controls electrolyte balance; nevertheless, taking medicine to inhibit it might have consequences and is not advised without a doctor's supervision.

learn more about temperature here:

brainly.com/question/7323169

#SPJ4

Full Question: How might you utilize your recently acquired knowledge from PSIO 305 to make a daytime hike in the 49 degree Celsius Mojave Desert non-deadly?

a. decrease surface area to maximize convection

b. all of the above

c. take medication to suppress aldosterone

d. drink lots of water to increase evaporative water loss

e. take off your shift to increase radiative heat loss

Based on the Doppler effect, the electromagnetic waves reaching Earth from a galaxy that is moving away from Earth would experience a decrease in frequency.

option C.

The Doppler effect is a phenomenon where the frequency of waves (such as electromagnetic waves or sound waves) is shifted as a result of the relative motion between the source of the waves and the observer. When a source of waves is moving away from an observer, the waves get stretched out, resulting in a decrease in frequency. This is known as redshift for light waves, which are a type of electromagnetic waves.

In the context of a galaxy moving away from Earth, the electromagnetic waves (such as light) emitted by the galaxy would experience a redshift, which means the frequency of the waves would decrease. This is a key observation in astronomy and cosmology that has been used to provide evidence for the expanding universe and the Big Bang theory, as galaxies in the universe are generally observed to be moving away from each other, causing their light to be redshifted.

Learn more about doppler effect here: https://brainly.com/question/3841958

#SPJ1

where

m is the mass

c is the specific heat capacity

ΔT is the change in temperature

In your problem,

m=2.5 kg

c=2.60 kJ⋅°C-1kg-1

Δ

∴ q=2.5kg×2.60 kJ⋅°C-1⋅kg-1×60°C=390 kJ

Answer:

The least amount of nitrogen oxide emissions comes from on-road vehicles, as modern automobiles are equipped with catalytic converters and other emission control systems to reduce nitrogen oxide emissions. Fossil fuel combustion, industrial processes, and electricity generation are significant sources of nitrogen oxide emissions, while fires can also contribute to nitrogen oxide emissions.

Explanation:

The distribution of cones at the point of image formation is crucial in resolving two point sources

To resolve two point sources, a distribution of cones must occur where the image strikes the retina. Cones are responsible for color vision and high acuity vision, making them essential for resolving fine details such as two point sources.

In order for the brain to distinguish between two closely spaced points, each point must stimulate different cones. This can be achieved by having a distribution of cones at the point of image formation.

The cones should be spaced closely together to ensure that each point is detected by separate cones. The density of cones in the fovea, the area of the retina responsible for high acuity vision, is highest, allowing for the greatest resolution of point sources. .

To learn more about : distribution

https://brainly.com/question/28027633

#SPJ11

Maxwell's equations are a complete description of electric and magnetic fields. There are four equations in Maxwell's equations. These four equations are:

1. Gauss's Law for Electric Fields: Describes the relationship between electric charges and the electric field produced by them.
2. Gauss's Law for Magnetic Fields: States that there are no magnetic monopoles, and the magnetic field lines are always closed loops.
3. Faraday's Law of Electromagnetic Induction: Describes the induced electromotive force (EMF) in a closed circuit produced by a changing magnetic field.
4. Ampere's Law with Maxwell's Addition: Relates the magnetic field around a closed loop to the electric current passing through the loop and the rate of change of the electric field.

These four equations collectively provide a comprehensive description of electric and magnetic fields and their interactions.

To know more about Ampere's Law with Maxwell's Addition:

https://brainly.com/question/29831953

#SPJ11

If the environmental air temperature decreases at a rate of 8°C/km, the atmosphere would be considered absolutely stable.

Here's a step-by-step explanation:

1) The stability of the atmosphere refers to its tendency to resist or promote vertical motion of air parcels.

2) When the temperature of the air decreases with height at a rate of less than 6.5°C/km, the atmosphere is considered absolutely stable.

3) When the temperature of the air decreases with height at a rate between 6.5°C/km and 10°C/km, the atmosphere is considered conditionally unstable.

4) When the temperature of the air decreases with height at a rate greater than 10°C/km, the atmosphere is considered absolutely unstable.

5)In this case, the temperature of the air is decreasing at a rate of 8°C/km, which is less than the threshold for conditionally unstable and absolutely unstable conditions.

6) Therefore, the atmosphere is considered absolutely stable.

Overall, when the environmental air temperature decreases at a rate of 8°C/km, the atmosphere is considered absolutely stable, because the rate of temperature decrease is less than the threshold for conditionally unstable and absolutely unstable conditions.

To know more about Temperature :

https://brainly.com/question/11464844

#SPJ11

The molecules in the Earth's atmosphere scatter blue wavelengths of light, making the sky appear blue during the day. The correct answer is a.

This phenomenon is known as Rayleigh scattering, which occurs when sunlight enters the Earth's atmosphere and interacts with the gas molecules in the air. The shorter, blue wavelengths of light are more easily scattered by the molecules in the atmosphere, while the longer, red wavelengths are less affected and continue to travel in a more direct path.

As a result, when we look up at the sky during the day, we see a blue color because the blue light is being scattered in all directions by the atmosphere. At sunrise and sunset, the sky appears more orange or red because the sun's light has to travel through more of the atmosphere, causing more scattering of the shorter, blue wavelengths and leaving more of the longer, red wavelengths to reach our eyes.

Learn more about  Earth's atmosphere

https://brainly.com/question/13154099

#SPJ4

Mass is the deciding element for a human since both have the same velocity. Mass-wise, a human is larger.

For more information on impact of mass on kinetic energy kindly visit to

https://brainly.com/question/20978463

#SPJ1

In a binary star system consisting of two stars of equal mass, the gravitational potential is equal to zero at the barycenter.

The barycenter is the center of mass of the two stars and is the point around which they orbit each other. It is the point where the gravitational forces of both stars cancel out, resulting in a net gravitational force of zero.

The barycenter is often located closer to the more massive star, but in a binary system with equal masses, it would be located halfway between the two stars.

This point is important for understanding the dynamics of the binary system, as it determines the path of each star's orbit around the other. The barycenter is also used to study exoplanets and their orbits around their host stars.

To learn more about : gravitational

https://brainly.com/question/27943482

#SPJ11

The largest x-ray wavelength that can be diffracted by crystal planes with a separation of 0.316 nm is 0.632 nm.

To find the largest X-ray wavelength that can be diffracted by crystal planes with a separation of 0.316 nm, we can use Bragg's Law:

nλ = 2d sinθ

where n is an integer representing the order of diffraction, λ is the wavelength, d is the separation between crystal planes (0.316 nm), and θ is the angle of incidence. To find the largest possible wavelength, we need to consider the lowest order of diffraction (n = 1) and the maximum angle of incidence (θ = 90°).

Now we can plug in the values and solve for λ:

1λ = 2(0.316 nm) sin(90°)

λ = 2(0.316 nm) * 1

λ = 0.632 nm

The largest X-ray wavelength that can be diffracted by crystal planes is 0.632 nm.

Learn more about Bragg's Law:

https://brainly.com/question/14617319

#SPJ11

We can use the formula for Newton's second law (F = ma) to find the mass of the merry-go-round, given the force and assuming that it accelerates uniformly.

The angular acceleration of the merry-go-round can be found using the formula:

angular acceleration = (final angular speed - initial angular speed) / time

angular acceleration = [tex](0.5250 rev/s - 0 rev/s) / 5.00 s = 0.105 rev/s^2[/tex]

Then, using the formula for torque (τ = Iα) and the moment of inertia of a solid disk (I = 0.5MR^2), we can find the torque exerted on the merry-go-round. Assuming that the torque comes from a person pushing on the edge of the disk, we can estimate the force exerted as F = τ / R, where R is the radius of the disk.

To know more about Newton's second law, here

brainly.com/question/13447525

#SPJ4

The total force exerted by the strings on the neck is 3061 N

We must determine the tension in each string and add it together to determine the overall force the strings are applying on the neck.

The wave speed equation may be used to determine the tension in a string:

v = fλ

where v is the speed of the wave (which is the same as the speed of the string), f is the frequency of the note, and λ is the wavelength of the wave (which is twice the length of the string).

For the g and d strings:

λ = 2(0.865 m) = 1.73 m

v = fλ

v_g = (98 Hz)(1.73 m) = 169.5 m/s

v_d = (73.4 Hz)(1.73 m) = 127.0 m/s

The tension in each string can be found using the wave equation:

T = [tex]μv^2/λ[/tex]

where T is the tension in the string, μ is the linear mass density of the string (mass per unit length), and v and λ are the speed and wavelength of the wave on the string.

For the g and d strings:

[tex]T_g = (5.8 g/m)(169.5 m/s)^2/1.73 m = 320 N[/tex]

[tex]T_d = (5.8 g/m)(127.0 m/s)^2/1.73 m = 196 N[/tex]

For the a and e strings

λ = 2(0.865 m) = 1.73 mv = fλ

v_a = (55 Hz)(1.73 m) = 95.2 m/sv_e = (41.2 Hz)(1.73 m) = 71.2 m/s

[tex]T_a = (26.8 g/m)(95.2 m/s)^2/1.73 m = 1643 N[/tex]

[tex]T_e = (26.8 g/m)(71.2 m/s)^2/1.73 m = 902 N[/tex]

The total force exerted by the strings on the neck is:

F_total = T_g + T_d + T_a + T_e

F_total = 320 N + 196 N + 1643 N + 902 N

F_total = 3061 N

Learn more about total force

https://brainly.com/question/30149537

#SPJ4

When you add a third slit to a two-slit, with the same slit separation, and shine the same laser beam on the three slits, the three-slit pattern will be different from compared to the double-slit pattern.

In a double-slit pattern, you will observe alternating bright and dark fringes due to the constructive and destructive interference of the light waves. In the three-slit pattern, the interference becomes more complex due to the additional slit. This results in a pattern with sharper and more closely spaced bright fringes, surrounded by regions of darkness, and weaker secondary peaks in between. The central maximum in the three-slit pattern will also be brighter and narrower than in the double-slit pattern.

The intensity distribution in the three-slit pattern is due to the combined effect of the three individual wave sources. The pattern is created by the superposition of these waves, which constructively and destructively interfere at different points, creating a more intricate pattern. The three-slit pattern differs from the double-slit pattern by having sharper, more closely spaced bright fringes, a narrower central maximum, and weaker secondary peaks. The overall intensity distribution is more complex due to the interference of the three individual wave sources.

know more about intensity here:

https://brainly.com/question/22279695

#SPJ11

The circled vector on the diagram below represents the tension on the rope.

The option C is correct

Tension is described as  the force transmitted through a string, rope, cable or wire when it is pulled tight by forces acting from opposite ends.

T = mg + ma

We know that the force of tension is calculated using the formula T = mg + ma.

In other terms, the pulling force that runs the length of a flexible connector, such a rope or cable, is known as tension. It is always pointed away from the force-applying object and along the length of the connector.

Learn more about tension at: https://brainly.com/question/24994188

#SPJ1

The amount of energy that must be removed from 0.811 kg of water to cool it from 91°C to 15°C is approximately 61.636 kcal.

To calculate the change in energy for this process, we will use the specific heat capacity of water and the equation:

[tex]Q = m . c .[/tex]ΔT

where:
Q = change in energy (in kcal).
m = mass of water (in kg).
c = specific heat capacity of water (in kcal/kg°C).
ΔT = change in temperature (in °C).

The specific heat capacity of water is approximately 1 kcal/kg°C.

Therefore, 61.636 kcal of energy must be removed from 0.811 kg of water to cool it from 91°C to 15°C.

Learn more about the amount of energy that must be absorbed or lost to raise or lower the temperature, at: https://brainly.com/question/29418076

#SPJ11

Increasing the current in the filament while keeping the accelerating voltage the same will increase the overall intensity of X-rays produced but will have no effect on the minimum energy required for an electron to knock out an inner-shell electron from a metal atom in the anode.

The minimum energy required for an electron to knock out an inner-shell electron from a metal atom in the anode is known as the work function (W). If the energy of the incident electron is less than the work function, then the inner-shell electron will not be ejected, and no X-rays will be produced.

the minimum energy required for an electron to knock out an inner-shell electron from a metal atom in the anode remains the same (assuming no change in the material or temperature of the anode). Therefore, the work function remains constant even when the current in the filament is increased.

To know more about electron:

https://brainly.com/question/1255220

#SPJ4

Answer:

Explanation: honestly i don’t speak spanish so please explain with english

False. Here is a step-by-step explanation:

1) Relative dating methods and absolute dating methods are two types of techniques used by geologists to determine the age of rocks and fossils.

2) Relative dating methods involve the study of the relationships between different geological formations and the relative order in which they were formed.

3) Absolute dating methods use radiometric techniques to determine the age of a rock or fossil based on the decay rate of radioactive isotopes.

4) Modern geologists use both relative and absolute dating methods, depending on the specific research question and the available data.

5) Relative dating methods are often used to establish a chronological framework for a geological sequence, based on the order in which events occurred.

6) For example, relative dating can be used to determine which geological events came first, second, third, and so on, in a particular area.

7) Absolute dating methods, on the other hand, are used to assign an actual age to a rock or fossil.

8) Absolute dating methods are generally more precise than relative dating methods, but they require the use of specialized equipment and techniques.

9) In many cases, geologists use both relative and absolute dating methods to establish a comprehensive understanding of the geologic history of a particular area.

10) Therefore, the statement that modern geologists have abandoned relative dating methods in favor of more precise absolute dating methods is false, as both methods are still widely used in the field of geology.

To know more about Modern geologists :

https://brainly.com/question/28274168

#SPJ11

False. Staleness and burnout are often associated with overtraining, which occurs when an individual exceeds their capacity to recover from intense physical training or activity.

Overtraining can lead to physical and psychological symptoms, including decreased performance, fatigue, irritability, and decreased motivation. It is important for individuals to listen to their bodies and take rest and recovery periods to prevent overtraining and associated symptoms.

To know more about Overtraining, please click:

brainly.com/question/5430690

#SPJ11

The observed value of the total radiant energy flux density at the earth from the sun, integrated over all emission wavelengths and referred to the mean earth-sun distance, is approximately 1,366 watts per square meter.

This value is known as the solar constant and is an important factor in understanding the earth's climate and energy balance. It represents the amount of solar energy that is received per unit area at the top of the earth's atmosphere and is a key input for models of global climate change.

Learn more about energy flux

https://brainly.com/question/30480603

#SPJ4

Sure, here are the steps to rank the fictitious stars based on their brightness as seen from Jupiter:

Determine the distance of each star from Jupiter. The closer a star is to Jupiter, the brighter it will appear in the sky.

Use the inverse square law to calculate the relative brightness of each star as seen from Jupiter.

The inverse square law states that the brightness of an object decreases with the square of its distance from the observer.

So, if star A is twice as far away from Jupiter as star B, it will appear four times dimmer than star B.

Rank the stars based on their relative brightness.

The star that appears brightest from Jupiter will be ranked first, while the star that appears dimmest will be ranked last.

Keep in mind that the brightness of a star also depends on its intrinsic brightness, or luminosity.

A star with a higher luminosity will appear brighter than a star with a lower luminosity, even if they are at the same distance from Jupiter.

However, since the set of stars is fictitious and we do not have information about their intrinsic brightness, we cannot take this factor into account in our ranking.

Overall, to rank the fictitious stars based on their brightness as seen from Jupiter, we need to consider their distance from Jupiter and use the inverse square law to calculate their relative brightness.

To know more about  fictitious stars :

https://brainly.com/question/15156213

#SPJ11

The speed of the raft immediately after the diver jumps is 0.6 m/s.

After the swimmer jumps, the momentum of the system is still conserved, but it is no longer zero, since the swimmer is now moving. We can use the equation:

(m1v1 + m2v2)before = (m1v1 + m2v2)after

We want to solve for v2, velocity of the raft immediately after the jump.

Before jump, velocity of  raft is zero, so we can simplify  equation to:

m1v1 = m2v2

Substituting in  values we know, we get:

60 kg * 1.5 m/s = 150 kg * v2

Simplifying, we get:

v2 = (60 kg * 1.5 m/s) / 150 kg = 0.6 m/s

So the speed of the raft immediately after the diver jumps is 0.6 m/s.

To know more about momentum, here

brainly.com/question/30677308

#SPJ4

The radial velocity technique is effective at finding planets that are massive and close to their host stars. This method has been particularly successful in detecting gas giant planets, with masses similar to or greater than Jupiter.

The radial velocity technique is effective at finding planets by measuring the small wobbles in a star's motion, caused by the gravitational pull of orbiting planets. It is particularly effective at detecting:

1. Massive planets: The technique works best for planets with larger masses, as they cause more significant wobbles in the star's motion, making them easier to detect.

2. Close-in orbits: Planets with shorter orbital periods (i.e., close to their host star) are more easily detected because they cause more frequent wobbles, resulting in a stronger signal.

In summary, the radial velocity technique is most effective at finding massive planets with close-in orbits. However, it may be less effective for smaller planets or those with more distant orbits, as they cause weaker or less frequent wobbles in the host star's motion.

*complete question; Summarize the effectiveness of the radial velocity technique. What types of planets is it effective at finding?

More on radial velocity: https://brainly.com/question/7805265

#SPJ11

If its mass is 500 kg and the acceleration due to gravity is 10 m/s^2, the weight of the elevator would be 5000 N (Newtons) .

To calculate the weight of the elevator, we can use the formula:

weight = mass * acceleration due to gravity

Given that the mass of the elevator is 500 kg and the acceleration due to gravity is 10 m/s^2, we can substitute these values into the formula and calculate the weight:

weight = 500 kg * 10 m/s^2

= 5000 N

Therefore, the weight of the elevator would be 5000 N (Newtons) if its mass is 500 kg and the acceleration due to gravity is 10 m/s^2.

To know more about acceleration due to gravity, here

brainly.com/question/13860566

#SPJ4

--The complete Question is, What would be the weight of the elevator if its mass is 500 kg, assuming that the acceleration due to gravity is 10 m/s^2? --