A rod with a length of L = 1 m is held vertically so that one end rests on the floor. After that
let go of the stick and fall. Let us assume that the supported end does not slip and that the thickness of the bar is very small compared to its length (that is, its moment of inertia with respect to the center of gravity is IT = 1/12mL^2

(a) With what speed does the other end of y hit the floor?
(b) How much does the end impact speed increase if it were a 100 m tall object that was originally
blasted off (and not broken when falling)?
Hint: Use the law of conservation of mechanical energy. Kinetic energy can be written in two ways:
1. Pure rotary movement around the end of the rod. 2. Rotary movement around the center of gravity + movement of the center of gravity. Both procedures,
of course, give the same result (you can try both and see for yourself).

To solve this problem, we can apply the principles of conservation of momentum and conservation of kinetic energy.

Given:

Mass of car 1 (m1) = 2000 kg

Initial velocity of car 1 (v1_initial) = 15.0 m/s to the right

Mass of car 2 (m2) = 1500 kg

Mass of car 3 (m3) = 2500 kg

Since the collision between car 1 and car 2 is described as elastic, we can use the conservation of momentum to find the final velocities of car 1 and car 2. The conservation of momentum states that the total momentum before the collision is equal to the total momentum after the collision.

Before the collision:

Initial momentum = m1 * v1_initial + m2 * 0 (since car 2 is initially at rest)

After the collision:

Final momentum = m1 * v1_final + m2 * v2_final

Using the conservation of momentum, we can equate the initial momentum to the final momentum:

m1 * v1_initial + m2 * 0 = m1 * v1_final + m2 * v2_final

Simplifying the equation:

m1 * v1_initial = m1 * v1_final + m2 * v2_final

Since car 2 and car 3 have a completely inelastic collision, they stick together and move as one unit. We can use the conservation of momentum again to find the final velocity of the car 2/3 combo.

Before the collision:

Initial momentum = m2 * v2_final + m3 * 0 (since car 3 is initially at rest)

After the collision:

Final momentum = (m2 + m3) * v_final_combo

Using the conservation of momentum:

m2 * v2_final + m3 * 0 = (m2 + m3) * v_final_combo

Simplifying the equation:

m2 * v2_final = (m2 + m3) * v_final_combo

Now we have a system of two equations with two unknowns (v1_final and v2_final), which we can solve simultaneously.

First, let's solve the first equation for v1_final:

m1 * v1_initial = m1 * v1_final + m2 * v2_final

v1_final = (m1 * v1_initial - m2 * v2_final) / m1

Next, let's solve the second equation for v2_final:

m2 * v2_final = (m2 + m3) * v_final_combo

v2_final = (m2 + m3) * v_final_combo / m2

Now we substitute the expression for v2_final into the expression for v1_final:

v1_final = (m1 * v1_initial - m2 * [(m2 + m3) * v_final_combo / m2]) / m1

v1_final = (m1 * v1_initial - (m2 + m3) * v_final_combo) / m1

Now we substitute the values:

v1_final = (2000 kg * 15.0 m/s - (1500 kg + 2500 kg) * v_final_combo) / 2000 kg

Simplifying the equation:

v1_final = (30000 kg·m/s - 4000 kg * v_final_combo) / 2000 kg

v1_final = (30.0 m/s - 2.0 * v_final_combo)

Now, let's substitute the expression for v2_final into the expression for v_final_combo:

v2_final = (m2 + m3) * v_final_combo / m2

v2_final = (1500 kg + 2500 kg) * v_final_combo / 1500 kg

v2_final = 4000 kg * v_final_combo / 1500 kg

v2_final = 2.67 * v_final_combo

Now we can substitute this expression into the equation for v1_final:

v1_final = (30.0 m/s - 2.0 * (2.67 * v_final_combo))

v1_final = 30.0 m/s - 5.34 * v_final_combo

Now we can solve for v_final_combo by equating the expressions for v1_final and v2_final:

30.0 m/s - 5.34 * v_final_combo = 2.67 * v_final_combo

Combine like terms:

30.0 m/s = 8.01 * v_final_combo

Solving for v_final_combo:

v_final_combo = 30.0 m/s / 8.01

Calculating the value:

v_final_combo ≈ 3.746 m/s

Now we can substitute this value back into the equation for v1_final to find v1_final:

v1_final = 30.0 m/s - 5.34 * v_final_combo

Substituting the value:

v1_final ≈ 30.0 m/s - 5.34 * 3.746 m/s

Calculating the value:

v1_final ≈ 8.99 m/s

Therefore, immediately after the collision, the speeds of the cars are approximately:

Car 1 (v1_final) = 8.99 m/s to the right

Car 2 (v2_final) = 2.67 * v_final_combo ≈ 2.67 * 3.746 m/s ≈ 10.01 m/s to the right

Car 2/3 combo (v_final_combo) = 3.746 m/s to the right

Sorry if my explanation is too long, i hope your understand! :)

The given statement "Aggression is intended to inflict physical or psychological harm on another individual" is true statement because Aggression is a general term for a variety of actions that might hurt you, other people, or inanimate things in the environment physically or psychologically.

"Physical attractiveness is important in attraction across cultures because it indicates good health, sound genes, and high fertility "is true statement.

"The study of how other people influence our thoughts, feelings, and actions is called social psychology." is true statement.

A person's bodily or emotional harm to another is at the heart of aggression. Aggression in psychology refers to a variety of actions that can injure oneself, others, or inanimate things in the environment. The primary goal of this kind of behaviour is to hurt another person, either physically or mentally. It can indicate a physical condition, substance use disorder, or underlying mental health condition.

Thus, all the given statement are true.

To know more about psychological

https://brainly.com/question/4625790

#SPJ1

Answer:

see below

Explanation:

CuO: Copper (II) oxide

Fe₂O₃: Iron (III) oxide

PbO₂: Lead (IV) oxide

A. The angular acceleration of the fan is 2.6 rad/s², B. the rotational inertia of the fan assembly is 0.672 kg·m² and C. The torque applied by the motor to bring the fan up to speed is 6.98 N·m.

(a) To determine the angular acceleration of the fan, we first need to convert the given angular speed from revolutions per minute (rpm) to radians per second (rad/s). One revolution is equivalent to 2π radians, and one minute is equivalent to 60 seconds, so we have:

Angular speed = 108 rpm

= (108 revolutions/minute) x (2π radians/revolution) x (1/60 minutes/second)

= 11.31 rad/s

Next, we can use the equation for rotational kinematics:

ω = ω0 + αt

where ω is the final angular speed, ω0 is the initial angular speed (which we assume to be zero), α is the angular acceleration, and t is the time taken to reach the final angular speed.

Substituting the given values, we get:

11.31 rad/s = 0 + α x 4.35 s

Solving for α, we get:

α = 11.31 rad/s / 4.35 s

= 2.6 rad/s²

Therefore, the angular acceleration of the fan is 2.6 rad/s².

(b) To determine the rotational inertia of the fan assembly, we can use the formula for the moment of inertia of a rod rotating about its end, which is:

I = (1/3)ml²

where m is the mass of the rod, and l is its length. Since the fan assembly consists of four rods of equal mass and length, we can find the moment of inertia of one rod, and then multiply by 4 to get the total moment of inertia of the assembly.

For one rod, we have:

m = 0.35 kg

l = 600 mm = 0.6 m

Substituting these values, we get:

I1 = (1/3) x 0.35 kg x (0.6 m)²

= 0.042 kg·m²

Using the parallel-axis theorem, the moment of inertia of the entire fan assembly about its axis of rotation is:

I = 4I1 + Md²

where M is the total mass of the fan assembly (which is 4 times the mass of one rod), and d is the distance from the axis of rotation to the center of mass of the assembly. Since the fan blades are evenly distributed around the axis of rotation, we can assume that the center of mass is located at the axis of rotation. Therefore, d = 0.

Substituting the given values, we get:

M = 4 x 0.35 kg = 1.4 kg

I = 4I1 + Md²

= 4 x 0.042 kg·m² + 1.4 kg x 0²

= 0.672 kg·m²

Therefore, the rotational inertia of the fan assembly is 0.672 kg·m².

(c) To determine the torque applied by the motor to bring the fan up to speed, we can use the formula for rotational kinetic energy:

K = (1/2)Iω²

where K is the rotational kinetic energy, I is the moment of inertia, and ω is the angular speed. The change in kinetic energy, ΔK, is equal to the work done by the motor, W:

ΔK = W

The work done by the motor is equal to the torque, τ, applied by the motor, multiplied by the angle through which the fan rotates, θ:

W = τθ

Since the fan rotates 360 degrees (or 2π radians) to reach its final speed, we have:

θ = 2π radians

Substituting the given values into the equation for ΔK, we get:

ΔK = (1/2)I(ω² - ω0²)

= (1/2)(0.672 kg·m²)(11.31² - 0²)

= 43.8 J

Equating ΔK to W and solving for τ, we get:

W = τθ

τ = W/θ

= 43.8 J / 2π radians

= 6.98 N·m

So, the torque applied by the motor to bring the fan up to speed is 6.98 N·m.

Hence, A. The fan's angular acceleration is 2.6 rad/s2, B. The fan assembly's rotational inertia is 0.672 kg/m2, and C. The torque used by the motor to accelerate the fan is 6.98 Nm.

To learn more about the moment of inertia click:

brainly.com/question/29415485

#SPJ1

The torque on the loop increases by a factor of 16.

option D.

The torque on a wire loop in a magnetic field is given by the equation:

τ = NIABsinθ

Where;

If the radius of the wire is doubled, then the area of the loop becomes four times larger.

Also, if the current flowing through the wire is quadrupled, then the torque becomes four times larger.

The torque on the loop increases by a factor of 4 x 4 = 16.

Learn more about torque here: https://brainly.com/question/14839816

#SPJ1

The trigonometric sine function may be used to compute the vertical component of the net force pushing the rocket away from Earth. The sine of a 20 degree angle is 0.3420.

The thrust multiplied by the sine of the angle, or 460,000 N multiplied by 0.3420, gives the vertical component of the net force, which is about 157,320 N. This is because the vertical component of the net force is equal to the thrust multiplied by the sine of the angle.

The thrust and weight of the rocket together provide this vertical component of the net force, which is the force pushing the rocket away from the Earth. The rocket is being propelled upward by a force of 460,000 N and a weight of 300,000.

Learn more about force   at:

https://brainly.com/question/30507236

#SPJ1

To determine the approximate vertical component of the net force moving the rocket away from Earth, we need to find the vertical force components of the thrust and weight.

The weight of the rocket, which acts vertically downward, is given as 300,000 N.

The thrust of the rocket is given as 460,000 N and is applied at an angle of 20 degrees from the vertical.

To find the vertical component of the thrust, we can use trigonometry. The vertical component is given by the formula:

Vertical component = Thrust * sin(angle)

Substituting the values into the formula, we have:

Vertical component = 460,000 N * sin(20°)

Calculating the value:

Vertical component ≈ 156,355 N

Therefore, the approximate vertical component of the net force that is moving the rocket away from Earth is approximately 156,355 N.

To know more about force:

https://brainly.com/question/30507236

#SPJ1

The velocity of the car at the end of the initial ten-second interval is 25.5 m/s.

Let's assume that the velocity of the car at the end of the initial ten-second interval is v. We know that the initial velocity of the car is 30 m/s, and it experiences an average acceleration of a1 during the first ten seconds.

Using the equation of motion: v = u + at, where v is the final velocity, u is the initial velocity, a is the average acceleration, and t is the time, we can write:

v = 30 + a1 * 10

During the next five seconds, the car slows down further to a velocity of 24 m/s and experiences an average acceleration of a2. So, we can write:

24 = v + a2 * 5

Now, we are given that the ratio of the average acceleration values is a1/a2 = 1.5. Therefore, we can substitute a1 = 1.5a2 in the first equation:

v = 30 + (1.5a2) * 10

v = 30 + 15a2

Substituting this value of v in the second equation, we get:

24 = 30 + 15a2 + a2 * 5

-6 = 20a2

a2 = -6/20

a2 = -0.3 m/s²

Substituting this value of a2 in the first equation, we can solve for v:

v = 30 + (1.5 * -0.3) * 10

v = 30 - 4.5

v = 25.5 m/s

Therefore, the velocity of the car at the end of the initial ten-second interval is 25.5 m/s.

For more such questions on velocity

https://brainly.com/question/80295

#SPJ11

The equivalent capacitance of given system of capacitors is 2C. Therefore, the correct answer is option B.

In the given system of capacitors upper and lower two capacitors between the two points are in series combination.

Therefore, the equivalent capacitance of upper and lower parts of the system can be calculated as,

[tex]C=\frac{C_{1} *C_{2} }{C_{1} +C_{2} }[/tex]

∴ C = (C×C)/(C+C)

      = C/2

Now, the upper combination, the middle one and the lower combination of capacitors are in parallel.

Therefore, the equivalent capacitance of whole system can be calculated as;

[tex]C_{eq} =C_{1} + C_{2}+C_{3}[/tex]

∴ Ceq. = (C/2) + C + (C/2)

           = 2C

Therefore, the equivalent capacitance of given system of capacitors is 2C.

Learn more about capacitance here

https://brainly.com/question/28445252

#SPJ1

A demonstration project applies existing knowledge, while a research project generates new knowledge and understanding in a field.

An exhibit project work normally includes the reasonable use of existing information and innovation to tackle an issue or show an answer. The point is to show the practicality of a thought or idea and give proof to help its reception. This kind of undertaking work is many times used to feature new innovations, items, or administrations and can include testing and approving the viability of an answer.

Then again, an examination project work is centered around propelling information and figuring out in a specific field or discipline. It includes precise examination, trial and error, and investigation to create new information, hypotheses, or ideas. The point is to find new realities, speculations or experiences and to add to the current assortment of information. Research project work is in many cases completed in colleges, research establishments, and businesses to resolve principal questions, investigate novel thoughts, or foster new advances

To learn more about research project, refer:

https://brainly.com/question/14398306

#SPJ1

Answer: 85% of the victims in domestic abuse cases are women.

Explanation:

This question is already asked

Take g=9.8Nkg−1. Q. The gravitational potential energy of a box of weight 150 KGF is 1.5×104J.

Answer:

[tex]6*10^4 [J][/tex]

Explanation:

Gravitational potential energy is given by the formula [tex]U=mgh[/tex] , where

Since g = 9.81 m/s^2, substituting the known values into the equation, we can calculate the Potential Energy.

[tex]U=mgh[/tex]

Substituting...

[tex]U=(150[kg])(9.81 [\frac{m}{s^2}])(40[m])[/tex]

Calculating and combining units...

[tex]U=58860 [\frac{kg \cdot m^2}{s^2}][/tex]

This combination of units is a Joule...

[tex]U=58860 [J][/tex]

Note that only 1 significant figure is given for the height, so only 1 significant figure should be used for the final answer:

[tex]U=60,000 [J][/tex]   or, in scientific notation  [tex]U=6*10^4 [J][/tex]

Two possible reasons for Akhenaten changing to a monotheistic belief system are: (b) he really did believe there was only one god (d).he feared the wealth and power of the priests are correct options.

Akhenaten's change to a monotheistic belief system is a complex historical event that has been the subject of much debate among scholars. However, there are two commonly proposed reasons for this religious transformation:

Thus, the correct options are (b)&(d).

The complete question  is,

Two possible reasons for Akhenaten changing to a monotheistic belief system are _____.

A.) he was hearing voices

B.) he really did believe there was only one god

C.) he thought there were too many gods to keep track of

D.) he feared the wealth and power of the priests

To know more about Akhenaten

https://brainly.com/question/1561386

#SPJ1

The false statement is " Population size of a country increases due to emigration." the correct option is B.

Emigration refers to people leaving a country to settle in another country. When individuals emigrate, they leave their home country, which usually leads to a decrease in the population size of that country, rather than an increase. Immigration, on the other hand, refers to individuals moving into a country from another country, which can contribute to population growth in the destination country.

Option A, "People immigrate to other areas for job opportunities," is generally true. Many individuals move to other regions or countries in search of better job prospects and economic opportunities.

Option C, "Rapid climate change can create environmental refugees," is also true. As climate change leads to environmental disruptions such as sea-level rise, extreme weather events, or resource scarcity, it can force people to leave their homes and become environmental refugees seeking safer and more habitable areas.

Option D, "Populations can decrease in a region with conflict," is true. Regions experiencing conflicts, wars, or political instability often witness population decrease due to displacement, migration, or casualties associated with the conflict.

However, option B, "Population size of a country increases due to emigration," is generally false.

Therefore, the false statement is B.

To learn more about Population size click:

https://brainly.com/question/30881076

#SPJ1

Answer:

t= (v-u)/a

Explanation:

using the formula

a = (v-u)/t

cross multiplying

at = v-u

dividing both sides by a

t = (v-u)/a

The evidence that  lead to the development of the principle of mass energy equivalence are radioactivity, atomic spectra and photoelectric effect.

The Einstein energy equation or the mass defect and binding energy are related by Albert Einstein's formula is given as;

E = mc²

where;

The evidence that  lead to the development of the principle of mass energy equivalence are listed below:

Learn more about mass defect here: https://brainly.com/question/30914903

#SPJ1

If you are riding in a firetruck with the siren blaring, you will experience the Doppler effect as the pitch of the siren will change depending on whether the firetruck is approaching or moving away from you.

If you are riding in a firetruck with the siren blaring, you will indeed experience the Doppler effect. The Doppler effect is the perceived change in frequency of a sound wave due to the relative motion between the source of the sound and the observer.

In the case of a firetruck siren, as the firetruck moves towards you, the sound waves emitted by the siren are compressed, resulting in an increased frequency. This increase in frequency leads to a higher pitch or a higher perceived sound. As a result, you will hear the siren with a higher pitch than its actual frequency.

Conversely, as the firetruck moves away from you, the sound waves emitted by the siren are stretched, resulting in a decreased frequency. This decrease in frequency leads to a lower pitch or a lower perceived sound. Therefore, when the firetruck is moving away from you, you will hear the siren with a lower pitch than its actual frequency.

The change in pitch is caused by the relative motion between the firetruck (the source of the sound) and the observer (you). This phenomenon is a characteristic feature of the Doppler effect.

It's worth noting that the perceived change in pitch may be more noticeable when the firetruck is moving at high speeds, as the relative motion between the firetruck and the observer is greater. Additionally, other factors like the surrounding environment, background noise, and the direction of the sound waves can also affect the perception of the Doppler effect.

For more such questions on Doppler effect visit:

https://brainly.com/question/28106478

#SPJ11

The melody in 12-bar blues often includes the feature "call and response," which is also found in some work songs.

Call and response is a musical pattern where a lead vocalist or instrumentalist (the "call") performs a musical phrase, and another vocalist or group of musicians (the "response") answers with their own phrase. This interaction creates a dynamic conversation within the music, engaging both the performers and the audience. The 12-bar blues is a popular chord progression in blues music, consisting of three chords over a repeating 12-bar structure.

This form is prevalent in African American musical traditions, including work songs, spirituals, and blues. Call and response, as a key feature of these genres, can be observed in the vocal and instrumental exchanges in 12-bar blues compositions. While bebop and ragtime are also significant musical styles, they are not directly associated with the melodic feature in question.

Bebop is a fast-paced and complex form of jazz, characterized by intricate melodies and improvisation. Ragtime, on the other hand, is an early 20th-century piano-based music style that emphasizes syncopation and a lively rhythm. In summary, the 12-bar blues often features call and response, a musical pattern that promotes interaction and engagement and is also present in work songs. This characteristic helps create a dynamic and captivating musical experience for both performers and listeners.

know more about chords here:

https://brainly.com/question/17023621

#SPJ11

The minimum force the farmer must exert on the lever is estimated to be 399 N.

A force is described as  an influence that causes the motion of an object with mass to change its velocity.

The principle of moments states that the sum of the moments of the forces about any point is equal to zero. We will take moments about the fulcrum.

F_  =  the minimum force

L = length of the lever.

We will use the formula below:

F_ *  L1 = (290 kg) * g L2

g = acceleration due to gravity is 9.81 m/s²

We take  L1 = 7 L2

F_(7 L2) = (290 kg) g L2

Force = (290 kg) g / 7

Force = 290 kg* 9.81 m/s² / 7

Force  = 399 N

Learn more about force at:

https://brainly.com/question/12970081

#SPJ1

As atomic size increases, van der Waals dispersion forces increase as well. Because of this, the intermolecular forces will increase as larger molecules experience greater force.

The volume available for mobility for molecules in an ideal gas is always the same as the volume of the container because it is assumed that they have zero volume.

The volume of an ideal gas's molecules, in comparison, is modest but measurable. The intermolecular distances between gaseous molecules are comparatively large when the pressure of the gas is low, but they get less and smaller as the pressure of the gas rises. Thus, in comparison to the volume of the container, the volume occupied by the molecules increases significantly.

To learn more about intermolecular forces, click:

https://brainly.com/question/18388327

#SPJ1

The differential in air pressure on the ball's various sides allows a spinning ball to provide more lift than a non-spinning ball, in accordance with Bernoulli's principle.

According to Bernoulli's principle, the pressure of a fluid decreases as the fluid's velocity increases. A ball is pushed in the opposite direction by a force produced by lower pressure, possibly producing more lift.

The lift is given to the ball by the air because the right side air moves in the same direction of the motion of the ball while the lift side goes into the opposite direction that creates a difference in the air pressure and more lift is the result.

To know more about Bernoulli's principle, visit,

https://brainly.com/question/13344039

#SPJ1

The average speed of Pluto in its orbit around the Sun is approximately 4.67 km/s.

To determine the average speed of Pluto, know the time it takes for Pluto to complete one orbit around the Sun.

Using Kepler's Third Law, find the orbital period of Pluto:

T² = (4π² / GM) × r³

where T = orbital period, G = gravitational constant, M = mass of the Sun, and r = average distance between Pluto and the Sun.

Plugging in the values:

T² = (4π² / (6.674 × 10⁻¹¹ m³ kg⁻¹ s⁻²) ) × (39.5 AU × 1.496 × 10¹¹ m/AU)³ / (1.989 × 10³⁰ kg)

T² = 905,594,481,160,410 s²

T = 30,105,559 s (or approximately 905.6 Earth years)

Now calculate the average speed of Pluto:

Average speed = Distance traveled / Time taken

Distance traveled = 2π × r (the circumference of Pluto's orbit)

Distance traveled = 2π × (39.5 AU × 1.496 × 10¹¹ m/AU)

Distance traveled = 7.44 × 10¹² m

Average speed = 7.44 × 10¹² m / (30,105,559 s × 365.25 days/year × 24 hours/day × 3600 s/hour)

Average speed = 4.67 × 10³ m/s

Therefore, the average speed of Pluto in its orbit around the Sun is approximately 4.67 km/s.

Find out more on Pluto here: https://brainly.com/question/27507002

#SPJ1

The characteristics of the image are: Inverted, Smaller, and Real.

The principal axis is an imaginary straight line passing through the center of a lens or a mirror, perpendicular to the surface at its center. All the parallel rays of light that pass through a lens or a mirror and are parallel to the principal axis converge at the focal point on the principal axis after refraction or reflection, respectively. Similarly, any ray of light that passes through the focal point before refraction or reflection will emerge parallel to the principal axis. The principal axis is an important reference line used in the geometry of optical systems.

To determine the image characteristics of the photograph when placed 21 cm in front of a converging lens with a focal length of 6.0 cm, we can use ray tracing.

Using the rules of ray tracing, we can draw three rays:

1. A ray parallel to the principal axis that passes through the focal point after refraction.

2. A ray that passes through the center of the lens and continues in a straight line.

3. A ray that passes through the focal point before refraction and emerges parallel to the principal axis.

The point where these rays intersect after refraction is the location of the image. In this case, the image is located 9 cm behind the lens.

Therefore, The characteristics of the image are: Inverted, Smaller, and Real.

To learn more about the mirror formula click:

brainly.com/question/30242207

#SPJ1

a) Magnitude of the resistance force is -24N.

b) We cannot calculate the work done without additional information about the distance or displacement of the bullet within the block.

a) To find the magnitude of the resistance force, we can use the equation of motion:

F = (mv - mu) / t

where F is the force, m is the mass of the bullet, v is the final velocity (0 m/s in this case), u is the initial velocity (20 m/s), and t is the time taken for the bullet to come to rest (0.1 s).

Plugging in the values:

F = (0.12 kg × 0 - 0.12 kg × 20 m/s) / 0.1 s

F = (-0.12 kg × 20 m/s) / 0.1 s

F = -24 N

Since the force is acting in the opposite direction of the bullet's initial velocity, we take the negative sign to indicate that.

b) The work done is given by the equation:

Work = Force × Distance

Since the bullet comes to rest in the block, the distance over which the resistance force acts is not given. Therefore, we cannot calculate the work done without additional information about the distance or displacement of the bullet within the block.

For more such questions on resistance force

https://brainly.com/question/2285158

#SPJ11

The correct statement is Molecular collisions transfer thermal energy between the system and its surroundings. Thus, option D is correct.

The energy moves between a system of reacting substances and the surroundings by the collision of molecules. The transfer of heat or thermal energy between the system and its surroundings by the process of Conduction. Conduction is the process of transmitting the heat to the neighboring atoms or collisions by the process of collisions.

The conduction takes place more steadily in solids and liquids where the molecules are closer together. When the molecules are collided with the nearby molecules, the potential energy is converted into kinetic energy and hence the heat energy is transferred between the system and its surroundings.

Hence, Molecular collisions transfer thermal energy between the system and its surroundings. Thus, the correct option is D.

To learn more about Conduction:

https://brainly.com/question/2880609

#SPJ1

The electric field of an isolated, uniformly charged, hollow metallic sphere greatest at the sphere’s outer surface.

Electric fields are essential to comprehend when studying charged particles and objects in space. They represent the region around these objects where other charged particles feel forces being exerted on them.

As a vector quantity, the electric field possesses both magnitude and direction. In particular, it always points away from positive charges while moving towards negative ones.

Learn about Electric fields here https://brainly.com/question/19878202

#SPJ1

Alvin was on the road for 490.3 minutes.

We can use the formula for average speed:

Average speed = Total distance / Total time

Let's assume that Alvin drove a distance 'd' km during his trip.

Then,

total distance = d

total time (T) = time spent driving(t) + time spent resting

                 T = t + 28

We know that,

Alvin's overall average speed = 85.81 km/h

and, 85.81 km/h = 1.4302 km/min ( by dividing with 60, ∵ 1hr. = 60 min.)

Now we can use the fact that Alvin's overall average speed was 1.4302 km/min to write:

d / total time = d/T = 1.4302 km/min

i.e., d / [(t + 28.0)] = 1.4302 km/min

Solving for t, we get:

t = (d / 1.4302) - 28.0

We also know that Alvin drove at a constant speed of 90.71 km/h for some time and took a rest stop of 28.0 minutes.

time spent driving, t = (distance driven) / (driving speed)

                               t = (d / 90.71) hr.

                               t = (d/90.71) × 60 min.

Substituting the expression for t from earlier, we get:

[tex]\frac{d}{1.4302}-28=\frac{d}{90.71}*60[/tex]

Solving for d, we get:

d = 741.3 kilometers

Finally, we can substitute this value of d into the expression for t to get:

t = (741.3 / 90.71) x 60 = 490.3 minutes

Therefore, Alvin was on the road for 490.3 minutes, not counting his rest stop.

Learn more about average speed here

brainly.com/question/12322912

#SPJ1

The correct measuring tool is a Graduated cylinder. The correct option is B

Tangential speed refers to the linear speed or velocity of an object along its circular path, specifically in the direction tangent to the circle. It represents how fast an object is moving along the circumference of the circle at a given point.

The other options are not suitable for measuring the time it takes for the toy to complete one revolution around the circle for the following reasons:

A) Force probe: A force probe is used to measure forces, not time. It would not provide accurate timing information for the toy's revolution.

C) Meterstick: A meterstick is used to measure lengths and distances. It cannot directly measure time, which is required to determine the time for one revolution.

D) Spring scale: A spring scale is used to measure forces. It would not provide accurate timing information for the toy's revolution.

On the other hand, a graduated cylinder is a cylindrical container with markings indicating volume. While it is primarily used for measuring the volume of liquids, it can also be used as a timing tool in this scenario. By filling the graduated cylinder with a known volume of liquid and placing it under the toy's path, the time it takes for the toy to complete one revolution can be measured by observing the displacement of the liquid level in the graduated cylinder over time.

Therefore, the correct answer is option B.

The question is incomplete , I think the question is,

One end of a string is attached to the ceiling - with the other end attached to toy. The toy can be set into motion such that travels in horizontal circular path , constant tangential speed as shown above: Which of the following measuring tools could be used to determine the time it takes for the toy to complete one revolution around the circle? String

A) Force probe

B) Graduated cylinder

C)Meterstick

D) Spring scale Toy

To learn more about angular acceleration click:

brainly.com/question/30238727

#SPJ1

Knowing the exits are exactly 7 km apart, the cars pass each other at 9:29 and 15 seconds a.m.

The relative velocity of the cars is 30 m/s - 26 m/s = 4 m/s.

The distance between the cars is 7 km = 7000 m.

The time it takes for the cars to pass each other is 7000 m / 4 m/s = 1750 seconds.

1750 seconds is 29 minutes and 15 seconds.

To calculate the time in minutes;

Let:

v_p = the speed of car P (m/s)

v_q = the speed of car Q (m/s)

d = the distance between the cars (m)

t = the time it takes for the cars to pass each other (s)

Given that:

v_p = 30 m/s

v_q = 26 m/s

d = 7000 m

Use the equation for relative velocity to find the velocity of the cars relative to each other:

v_r = v_p - v_q

v_r = 30 m/s - 26 m/s = 4 m/s

Use the equation for distance to find the time it takes for the cars to pass each other:

d = v_r × t

7000 m = 4 m/s × t

t = 7000 m / 4 m/s = 1750 s

Convert 1750 seconds to minutes and seconds:

1750 s = 29 minutes and 15 seconds

Therefore, the cars pass each other at 9:29 and 15 seconds a.m.

Find out more on constant speed here: https://brainly.com/question/31427655

#SPJ1

A bicycle traveling at an average speed of 2 mi./s will be take time 0.031 seconds to travel a distance of 100 m.

The average speed of 2 mi./s cannot be used to calculate the time required to travel a distance of 100 m because the units are not consistent.

To solve this problem, we need to convert the speed from miles per second to meters per second, as follows:

1 mile = 1609.34 meters

1 second = 1 second

Therefore, 2 mi./s can be converted to meters per second as:

2 mi./s * 1609.34 m/mi = 3218.68 m/s

Now we can use the formula

distance = speed × time

to find the time required to travel 100 m at this speed:

time = distance / speed

time = 100 m / 3218.68 m/s

time=0.031 s

Therefore, a bicycle traveling at an average speed of 2 mi./s would take approximately 0.031 seconds to travel a distance of 100 m.

The complete questions is,

How much time is required for a bicycle to travel a distance of 100 m at an average speed of 2 mi./s?

To know more about time

https://brainly.com/question/14518414

#SPJ1