Answer: 180 Newtons.
Explanation:
The alternate form of Newton's second law states that force (F) is equal to mass (m) multiplied by acceleration (a):
F = m x a
In this problem, the mass of the runner (m) is 90 kg, and the acceleration (a) can be found by dividing the change in velocity (8 m/s) by the time interval (4 s):
a = (8 m/s) / (4 s) = 2 m/s^2
Substituting the values into the equation for force:
F = 90 kg x 2 m/s^2
F = 180 N
Therefore, the net force on the runner is 180 Newtons.
You are sitting on a bus holding a book in your lap. A friend outside the bus watches you move forward, towards the north. Which statement best describes how the book's motion is relative to the frame of reference – you and your friend? You observe the book not moving, but your friend observes it moving north. You and your friend both observe the book moving to the north. Your friend observes the book accelerating south, while you see it standing still. You and your friend observe the book's velocity decreasing.
You and your friend both observe the book moving to the north. This is because the motion of the book is relative to the frame of reference – you and your friend – and since you are both moving in the same direction.
What is motion?Motion is the process of changing position over time. It is an essential concept in physics, and can be seen in everyday activities, including walking, driving, and throwing a ball. Motion is a relative concept, and is commonly described using concepts such as velocity, acceleration, and displacement. To describe motion, one must include both the direction and the magnitude of the change in position. In the physical sciences, motion is described using the laws of classical mechanics, which are based on Isaac Newton's laws of motion. These laws describe how an object's motion can be affected by forces such as gravity, friction, and tension.
To learn more about motion
https://brainly.com/question/26083484
#SPJ9
match the silicate structure with the appropriate mineral example. - independent tetrahedra e. single chain - double chain - sheet - network
Answer:
Independent tetrahedra: Olivine
Single chain: Pyroxene
Double chain: Amphibole
Sheet: Mica
Network: Feldspar
Minerals are naturally occurring substances that form when elements combine in a specific ratio and arrangement. Silicates are the most abundant minerals on Earth and are composed of silicon and oxygen. They are further classified by their structure and the arrangement of their oxygen and silicon atoms.
Independent tetrahedra have silicate tetrahedrons (SiO4) that are not connected. Olivine is an example of this, and is formed from magnesium and iron-rich silicates.
Single chain silicates are composed of linked tetrahedral, forming a single chain. Pyroxene is an example of this, with single chain silicates typically forming as a result of metamorphism or magmatic processes.
Double chain silicates are composed of two connected chains of silicate tetrahedrons. Amphibole is an example of this, and is found in many igneous and metamorphic rocks.
Sheet silicates have silicon and oxygen atoms that are linked in sheets. Mica is an example of this, and can form as a result of chemical weathering of larger silicates.
Network silicates are composed of many tetrahedrons that are linked together in a network. Feldspar is an example of this, and is the most abundant mineral in the Earth’s crust.
Know more about silicates here:
https://brainly.com/question/29560091
#SPJ11
(PLS HELP!!!) Which best describes the ecosystem of a lake or pond?
A.
They are aquatic because they are made of land.
B.
They are aquatic because they are made of water.
C.
They are terrestrial because they are made of land.
D.
They are terrestrial because they are made of water.
Answer: B.
Explanation:
Lakes and ponds are considered aquatic regions, as almost all life in them is marine.
which would be the most efficient manner in which to lift a heavy box? turn side to box and lift with one arm grasp box at arms length place one hand under box and one hand on top at arms length face box with elbows bent and arms close to body
The most efficient manner in which to lift a heavy box is to face the box with elbows bent and arms close to the body.
What is efficiency? Efficiency is the ratio of useful work done by a device to the total energy expended or heat consumed. Efficiency is a measure of the effectiveness with which a device does work.
In order to lift a heavy box, a certain posture must be maintained. Following is the correct way to lift a heavy box:
Face the box with elbows bent and arms close to the body.
Lifting a heavy box with proper posture is important for preventing injury. To lift a heavy box with proper posture, stand as close as possible to the box, feet hip-width apart, and squat down by bending the hips and knees. Once the arms are securely wrapped around the box, use the legs to lift the box off the ground, keeping the back straight and the box as close to the body as possible. This posture prevents the back from rounding, which can cause spinal injuries, and it also enables the arms and legs to work together, distributing the weight of the box more evenly. This posture is the most effective way to lift a heavy box, and it is essential to follow it to avoid injury.
To learn more about force refer to: brainly.com/question/12970081
#SPJ11
4. QUESTIONS
The tapered springs obey Hooke's over the widest range of loads when suspended with the large
diameter end down. This is why they are made that way. Explain why this works.
Tapered springs are designed to be load-bearing structures that can store and release mechanical energy in response to applied forces or loads.
When a tapered spring is suspended with the large diameter end down, it experiences a compressive force due to gravity.
Mechanical energy refers to the energy that an object possesses due to its motion or position. Mechanical energy is conserved in a closed system, meaning that it can neither be created nor destroyed. The formula for kinetic energy is KE = 1/2mv², where m is the mass of the object and v is its velocity.
There are various forms of potential energy, such as gravitational potential energy, elastic potential energy, and chemical potential energy. The formula for gravitational potential energy is PE = mgh, where m is the mass of the object, g is the acceleration due to gravity, and h is the height of the object above a reference point.
To learn more about Mechanical energy visit here:
brainly.com/question/14688403
#SPJ4
9. Kinetic molecular theory postulates are written for ideal gas behavior. In reality, gases to not behave ideally. For example, water molecules are polar and create surface tension through hydrogen bonds, even in vapor form. This explains why clouds are formed. Which postulate of the kinetic molecular theory is untrue for the formation of clouds?
The frequency of wall contacts and thus the pressure of the gas increase as the number of gas particles in the container rises.
How does the kinetic theory of molecules explain how ideal gas molecules behave?The kinetic molecular theory of gases explains how ideal gases behave. Pressure is explained by molecular motion, which causes collisions between molecules and the container walls. Gases' great compressibility is explained by the enormous intermolecular distances between their molecules.
Which kinetic molecular theory postulate explains the fact that a gas's pressure rises as its temperature does?Charles' rule. Only by increasing the volume the gas occupies can a steady pressure be maintained while the temperature of the gas rises.
To know more about frequency visit:-
brainly.com/question/3795295
#SPJ1
How does right-hand rule or F=BIL show the relationship between electricity and magnetism?
Electricity and magnetism are interrelated phenomena, and the right-hand rule provides a way to visualize the relationship between the two.
The right-hand rule (or F=BIL) is a mnemonic device used to show the relationship between electricity and magnetism in a current-carrying conductor. It is based on the observation that when a current-carrying conductor is placed in a magnetic field, a force is exerted on the conductor, causing it to move.
The right-hand rule states that if the thumb of the right hand points in the direction of the current, and the fingers of the right hand curl in the direction of the magnetic field, then the palm of the right hand will face in the direction of the force exerted on the conductor. This relationship is mathematically represented by the equation:
F = BIL
Where:
F is the force exerted on the conductor (newtons)
B is the strength of the magnetic field (teslas)
I is the current flowing through the conductor (amperes)
L is the length of the conductor in the magnetic field (meters)
This equation shows that the force exerted on the conductor is proportional to the strength of the magnetic field, the current flowing through the conductor, and the length of the conductor in the magnetic field.
This relationship between electricity and magnetism can be explained by the fact that an electric current creates a magnetic field around the conductor, and a magnetic field exerts a force on a current-carrying conductor. Therefore, electricity and magnetism are interrelated phenomena, and the right-hand rule provides a way to visualize the relationship between the two.
for such more question on magnetism
https://brainly.com/question/14997726
#SPJ4
callisto, the fourth moon of jupiter, takes 17 days to orbit jupiter. if you could stand on the surface of callisto and see jupiter high in the sky over my head, and then wait 8.5 earth days in the same spot, where would you see jupiter?
If you were standing on the surface of Callisto, Jupiter's fourth moon, and waited 8.5 Earth days in the same spot, you would see Jupiter in the same position in the sky. This is because Callisto takes 17 days to complete an orbit of Jupiter, and 8.5 days are half of 17 days.
The time it takes Callisto to complete one orbit of Jupiter is 17 days. If a person were standing on the surface of Callisto and saw Jupiter high in the sky above their head, they would observe Jupiter moves during a period of 8.5 Earth days. Here's where they would see Jupiter at the end of the waiting period: Jupiter would appear to have moved to the opposite side of Callisto. The reason for this is that Jupiter's position in the sky depends on the planet's relative location in its orbit around the Sun, as well as the position of the observer. As Callisto orbits Jupiter, the location of Jupiter in the sky over Callisto would change.Learn more about Callisto: https://brainly.com/question/30464364
#SPJ11
An object of mass 2 kg is undergoing simple harmonic motion represented by the graph of displacement versus time shown above. If the amplitude of the motion is 3 m, what is the magnitude of the net force on the mass at t=15s?
The magnitude of the net force on the mass at t=15s is 2.36 N.
What is the net force on the mass?The net force on the mass is calculated by applying Newton's second law of motion as follows;
F (net) = ma
where;
m is the mass of the objecta is the acceleration of the object.The acceleration of a simple harmonic motion can be expressed by the following formula:
a = -ω²x
where:
a = accelerationx = displacement from the equilibrium positionω = angular frequency of the motionIn this formula, the negative sign indicates that the acceleration is opposite in direction to the displacement, which is a defining characteristic of simple harmonic motion.
The angular frequency ω is related to the period T and the frequency f of the motion by the formulas:
ω = 2π/T = 2πf
The frequency of this oscillation is calculated as follows;
when the object makes one complete cycle, the time period = 9 seconds
f = n/T
f = 1/9
f = 0.1 Hz
ω = 2πf
ω = 2π x 0.1 = 0.628 rad/s
The acceleration of the object is calculated as;
a = ω²x
(the displacement, x at 15 s = amplitude of the motion = 3 m)
a = (0.628²) x (3)
a = 1.18 m/s²
The net force on the mass is calculated as;
F (net) = ma
F (net) = 2 kg x 1.18 m/s²
F (net) = 2.36 N
Learn more about net force here: https://brainly.com/question/14361879
#SPJ1
you want to make a flashlight using a small bright bulb and a concave spherical mirror. where should you place the light bulb so that the flashlight's beam is as narrow and bright as possible?
The light bulb should be placed at the focal point of the mirror so that the flashlight's beam is as narrow and bright as possible.
A concave spherical mirror has a curved surface that curves inward, so that it is thinner at the center than at the edges. Light that reflects off a concave spherical mirror is reflected inward towards the focal point of the mirror.
The distance from the mirror to the focal point is called the focal length, which depends on the curvature of the mirror.
When you place the light bulb at the focal point of the mirror, the light rays from the bulb will reflect off the mirror and emerge from the mirror parallel to each other, producing a narrow beam of light. This is because light rays that are parallel to the axis of the mirror are reflected through the focal point.
The beam will also be bright because all the light from the bulb is directed into a narrow beam.
Therefore, to make a flashlight with a narrow and bright beam, you should place the small bright bulb at the focal point of the concave spherical mirror.
To learn more about the 'focal point':
https://brainly.com/question/12653475
#SPJ11
If a 1-megaton nuclear weapon is exploded at ground l
Answer:
thats gonna be a huge problem
Explanation:
If a 1 MEGATRON nuke falls on ground and explodes upon impact thats uhoh becuase many people can die and many houses will be destroyed.
A capacitor is formed from two identical conducting parallel plates separated by a distance d One plate is charged Q. the other plate is charged -Q. A dielectric slab fills the space between the two plates. Where is the energy stored in this capacitor? A) On the outsides of the metal plates. B) On the insides of the metal plates. C) On the outside su face of the dielectric slab D) Inside the dielectric slab,
The energy in a capacitor is stored inside the dielectric slab. Therefore, the correct answer is D) Inside the dielectric slab.
A capacitor is a device that stores electrical energy in an electric field. It is made up of two conductive plates separated by a dielectric material. When a voltage is applied across the plates, an electric field is created between them, and the energy is stored in this field.
In the case of the capacitor described in the question, the energy is stored inside the dielectric slab that fills the space between the two plates. This is because the electric field is strongest in the region between the plates, where the dielectric material is located. The energy is stored in the form of an electric field within the dielectric material, and this is where the energy is stored in the capacitor.
To learn more about Capacitor :
https://brainly.com/question/27258294
#SPJ11
PLEASE EXPLAIN WHAT THIS MEANS I NEED HELP UNDERSTANDING!!
Develop an investigation to provide evidence of positive entropy within a nearly
closed system. Start with the materials you used in the insulation test activity,
adding to them as needed and applying what you have learned to plan a system
that is as closed as possible. Decide how you will measure thermal energy in
each of two components of the system, how you will determine their change in
energy, and how you will calculate entropy. Write a step-by-step procedure, and
then conduct your investigation.
After you conduct your investigation, write an analysis of your findings. Include
answers to the following questions in your analysis.
Entropy changes that are positive (+) indicate more chaos. The entropy of the universe is increasing. The entropy of a universe increases whenever there is any spontaneous change.
What constitutes a positive example of entropy?As the ice melts, the molecules grow disorganised as they are now able to move about. The water is then heated to transform into a gas, releasing the molecules to move freely through space. Both of the above reactions would have a positive entropy (DS).
What are some examples of positive or negative entropy?Positive entropy indicates an increase in randomness in a system. Positive entropy processes include boiling and evaporation. A system has less randomness when the entropy is negative. A few instances of negative entropy processes include freezing and condensation.
To know more about universe visit:
https://brainly.com/question/11987268
#SPJ1
According to the table, these four models all represent molecules. One model is composed of two atoms of the same element. That is model.
ANSWER ASAP PLS
According to the question, each molecular model in the possibilities has spheres of varying colors and sizes that represent various sorts of atoms.
What is a molecule made up of atoms of two or more distinct elements?A compound is a material composed of atoms or ions of two or more distinct elements linked by chemical bonds to form a molecule.
A molecule is composed of one or more atoms. If they have more than one atom, the atoms can be the same (as in an oxygen molecule), or they can be distinct.
Atoms of the same element have the same color and size, but atoms of other elements do not.
learn more about molecules
https://brainly.com/question/475709
#SPJ1
(PLS HELP!!!) Meadow voles are small mouse-like animals that eat plants and insects. Their niche in an ecosystem is a
A.
omnivore.
B.
herbivore.
C.
producer.
D.
scavenger.
Their niche in an ecosystem is a B. herbivore.
Define about the ecosystem ?
An ecosystem is a community of living organisms and their physical environment, interacting as a system. It can be as large as a whole forest or as small as a puddle of water.
An ecosystem is composed of both biotic factors (living things) and abiotic factors (non-living things).
Examples of biotic factors include plants, animals, and microorganisms, while abiotic factors include things like water, air, temperature, and soil. These factors interact with each other in complex ways, such as through food chains and nutrient cycling, to maintain the overall balance of the ecosystem.
Ecosystems can be found in many different environments, including deserts, oceans, forests, and grasslands, and each one has its own unique set of organisms and interactions.
To learn more about ecosystem follow the given link: https://brainly.com/question/24155138
#SPJ1
In 1912, Alfred Wegener proposed his continental drift theory and was widely rejected. Imagine if you had to assist Wegener in proving that we live on huge plates that are constantly in motion. Luckily, you also have provided resources such as videos and articles to compile your evidence and help Wegener. Present your research using an interactive PowerPoint or Storyboard while answering the below questions.
1. What does the theory of plate tectonics state?
2. What was Pangaea?
3. Why was Wegener's original idea about continental drift referred to as intuition and not science?
4. What did Wegener find that he believed was evidence to support his theory?
Evidence for plate tectonics
Research the evidence that scientists used to prove the theory that continents move.
Research rock formation evidence and give examples.
Research fossils evidence
o Research fossil evidence of the following organisms: Glossopteris, Mesosaurus, Cynognathus and Lystrosaurus. Summarize the type of organisms, their habitat and climate conditions.
5. Research evidence from glaciers and coal deposits.
Answer:
1. The theory of plate tectonics states that the Earth's outer shell is divided into several plates that move and interact with each other. These plates are made up of the Earth's crust and the upper part of the mantle, and they move due to the convection currents in the mantle.
2. Pangaea was a supercontinent that existed about 300 million years ago. It was made up of all the continents that we know today, and it began to break apart about 200 million years ago.
3. Wegener's original idea about continental drift was referred to as intuition and not science because he did not have a mechanism to explain how the continents moved. Additionally, he did not have enough evidence to support his theory.
4. Wegener found several pieces of evidence that he believed supported his theory of continental drift. He noticed that the coastlines of South America and Africa fit together like puzzle pieces, and he also found similar rock formations and fossils on both continents.
Evidence for plate tectonics:
Rock formation evidence: Scientists have found similar rock formations on different continents that were once connected. For example, the Appalachian Mountains in North America and the Caledonian Mountains in Europe have similar rock formations.
Fossil evidence: Scientists have found fossils of the same species on different continents that were once connected. For example, the Glossopteris plant was found in South America, Africa, India, Australia, and Antarctica. This suggests that these continents were once connected and had similar climates.
Glossopteris: Glossopteris was a plant that lived about 250 million years ago. It was found on several continents that were once connected, including South America, Africa, India, Australia, and Antarctica. This suggests that these continents were once connected and had similar climates.
Mesosaurus: Mesosaurus was a freshwater reptile that lived about 300 million years ago. Its fossils have been found in South America and Africa, which suggests that these continents were once connected and had similar habitats.
Cynognathus: Cynognathus was a carnivorous mammal-like reptile that lived about 250 million years ago. Its fossils have been found in South America, Africa, and Antarctica, which suggests that these continents were once connected and had similar habitats.
Lystrosaurus: Lystrosaurus was a herbivorous mammal-like reptile that lived about 250 million years ago. Its fossils have been found in South America, Africa, India, and Antarctica, which suggests that these continents were once connected and had similar habitats.
Glacier and coal deposit evidence: Scientists have found evidence of glaciers and coal deposits in areas that are now near the equator. This suggests that these areas were once located near the poles and have moved due to plate tectonics. Additionally, coal deposits found in Antarctica suggest that it was once located in a warmer climate.
In which situation is the principal of cross-cutting relationships useful in determining relative age?
The principle of cross-cutting relationships is useful in determining relative age in situations where geological features such as faults, and erosion surfaces cut across layers of rock.
By applying this principle, geologists can determine the relative age of the features based on their relationship to the surrounding rock layers. For example, if a fault cuts across a layer of rock, it must be younger than the layer it cuts through. Erosion surfaces that cut across multiple layers of rock can also be used to determine relative age, with the surface being younger than the layers it cuts across.
Overall, the principle of cross-cutting relationships is useful in determining the relative timing of events that have occurred in a geological area.
To know more about cross-cutting relationships, here
brainly.com/question/19550092
#SPJ4
any help will be appreciated!!
The question of why individuals act certain ways has always been of interest to psychologists. Several perspectives have provided different explanations for this question. Describe the primary area of interest for explaining and justifying behavior and the key figures (people) identified for each of the following psychological perspectives.
Psychodynamic:
Behavioral:
Humanistic:
Cognitive:
Answer:
The question of why individuals act in certain ways has been of interest to psychologists for a long time, and different perspectives have provided various explanations for this question. Below is a brief description of the primary area of interest for explaining and justifying behavior, along with the key figures associated with each of the following psychological perspectives:
Psychodynamic Perspective: The psychodynamic perspective emphasizes the role of unconscious thoughts, feelings, and memories in shaping behavior. The primary area of interest in this perspective is understanding the unconscious conflicts and repressed emotions that influence behavior. The key figures associated with this perspective are Sigmund Freud and his followers.
Behavioral Perspective: The behavioral perspective emphasizes the role of environmental factors in shaping behavior. The primary area of interest in this perspective is the understanding of how external stimuli, rewards, and punishments can shape behavior. The key figures associated with this perspective are Ivan Pavlov, B.F. Skinner, and John B. Watson.
Humanistic Perspective: The humanistic perspective emphasizes the role of personal growth, choice, and free will in shaping behavior. The primary area of interest in this perspective is the understanding of how individuals can fulfill their potential and achieve self-actualization. The key figures associated with this perspective are Abraham Maslow and Carl Rogers.
Cognitive Perspective: The cognitive perspective emphasizes the role of mental processes, such as perception, memory, and thought, in shaping behavior. The primary area of interest in this perspective is the understanding of how individuals process information and make decisions. The key figures associated with this perspective are Jean Piaget, Aaron Beck, and Albert Ellis.
Explanation:
You are rowing your boat in order to cross a river with a fast moving current which flows eastward. You angle the bow (front) of the boat in order to reach a point due north directly across the shore from you and begin to row at 4 m/s. If the current in the river has a speed of 2 m/s, you should angle the bow of the boat O due east O 30° East of North O 45° North of West O 30° West of North O due north O due west
Answer:
Let V be the speed of the boat (vector quantity)
R is the speed of the river
We want to add these two vectors to get a vector point straight north
If V is the speed of the boat to the northwest and R is the speed of the river we have
V + R = N (vector quantities)
Sin θ = R / V = 2 / 4 = 1/2 θ = 30 deg
One should angle the boat 30 deg west of north
You should angle the bow of the boat 30° West of North in order to reach a point due north directly across the shore from you.
This is because the current in the river is flowing eastward at a speed of 2 m/s, which means that it will push your boat to the east.
In order to counteract this force and reach the point directly across the shore from you, you need to angle the bow of the boat slightly to the west.
By angling the bow of the boat 30° West of North, you will be able to use the force of the current to help you move northward while also counteracting the force of the current pushing you to the east.
This will allow you to reach the point directly across the shore from you.
Here is a step-by-step explanation of how to calculate the angle of the bow of the boat:
1. Draw a diagram of the situation, with the boat in the center and the current flowing from left to right (eastward).
2. Draw a vector representing the velocity of the boat, with a magnitude of 4 m/s and an angle of 30° West of North.
3. Draw a vector representing the velocity of the current, with a magnitude of 2 m/s and an angle of 0° (due east).
4. Use the Pythagorean theorem to find the magnitude of the resultant vector, which represents the velocity of the boat relative to the shore.
5. Use trigonometry to find the angle of the resultant vector, which represents the angle of the bow of the boat.
Therefore, the answer is 30° West of North.
To know more about angle, refer here:
https://brainly.com/question/29000166#
#SPJ11
Explain practical applications of good and bad conductors
Good conductors and bad conductors, also known as insulators, have different properties that make them suitable for various practical applications.
A conductor is a material that allows the flow of electric current, while an insulator (or bad conductor) is a material that resists the flow of electric current.
Good conductors are materials that allow the flow of electric current with low resistance. They are characterized by having a high density of free electrons that can move through the material easily when a voltage is applied. Metals, especially copper, silver, and gold, are good conductors of electricity because they have a large number of free electrons in their outermost atomic shells. Other materials such as aluminum, iron, and graphite are also good conductors, although they may not be as efficient as metals.
Good conductors have a wide range of practical applications in various industries, including electrical wiring, electronics, and energy generation. They are used in everything from electrical cables to electronic devices like smartphones and computers, where their low resistance allows for efficient energy transfer and signal transmission.
To learn more about Good Conductor visit here:
brainly.com/question/12370218
#SPJ4
Compilation of fashion accessories articles in the Philippines
HAMMER. It is utilized to fall to pieces of shisha material privately called (aluminum alloy) for simple liquefying. Forceps. It is a hand instrument commonly utilized for twisting and compacting many materials. Texture Paste, WOOLEN YARN, NEEDLE, SCISSORS, HAND Devices, AND Record Apparatuses.
In fashion, an accessory is a thing used to contribute, in an optional way, to a singular outfit. Accessories are much of the time decided to finish an outfit and supplement the wearer's look.[1] They have the ability to additional express a singular's character and character. Accessories come in various shapes, sizes, tones, and so on. The term came into utilization in the twentieth 100 years.
Fashion accessories can be inexactly ordered into two overall areas: those that are conveyed and those that are worn. Generally conveyed accessories incorporate totes and purses, hand fans, parasols and umbrellas, wallets, sticks, and stately blades. Accessories that are worn may incorporate coats, boots and shoes, cravats, ties, caps, hats, belts and suspenders, gloves, muffs, pieces of jewelry, wristbands, watches,[a] eyewear, bands, cloaks, scarves, cords, socks, pins, piercings, rings, and stockings.[1]
The kind of accessory that an individual decides to wear or convey to supplement their outfit is not entirely set in stone by a few elements, including the particular setting of where the individual is going. For instance, assuming an individual will work their decision of accessory would contrast from somebody who is going out to beverages or supper; along these lines relying upon work or play various accessories would be picked. Likewise, a person's conservative status, the strict and social foundation would likewise be a contributing component
to know more about alloy click here:
https://brainly.com/question/1759694
#SPJ4
the complete question is:
what is the Compilation of fashion accessories articles in the Philippines?
These articles discuss a range of issues regarding fashion accessories in the Philippines, such as up-and-coming accessory firms, sustainable fashion, traditional accessories, and styling advice. Individuals with an interest in Filipino fashion, provide knowledge and inspiration.
The fashion accessories industry in the Philippines is vibrant and diverse. These articles provide valuable insights into various aspects of the industry. From emerging accessory brands and local designers making waves globally to sustainable and traditional accessories, there is something for everyone. Style tips and practical advice are also available for those looking to elevate their accessorizing game. The beauty and craftsmanship of locally-made accessories are celebrated, and options for budget-conscious shoppers are provided. These articles showcase the richness and diversity of the Philippine fashion scene and its contribution to the global fashion industry.
learn more about fashion accessories here:
https://brainly.com/question/30809653
#SPJ4
Four compasses are placed around a wire, as shown.
A long wire that is vertical and standing on a steel plate. There are 4 compasses surrounding it and all of the needles are pointing in the same direction, west.
The wire is then connected to a battery so that a current flows down the wire.
How will the compasses point once the current is flowing?
A long wire that is vertical and standing on a steel plate. There are 4 compasses surrounding it and all of the needles are pointing in the same direction, west.
A long wire that is vertical and standing on a steel plate. There are 4 compasses surrounding it and all of the needles are pointing in the same direction, east.
A long wire that is vertical and standing on a steel plate. There are 4 compasses surrounding it and all of the needles are pointing clockwise.
A long wire that is vertical and standing on a steel plate. There are 4 compasses surrounding it and all of the needles are pointing counterclockwise.
Once the current is flowing the compass will show
A long wire that is vertical and standing on a steel plate. There are 4 compasses surrounding it and all of the needles are pointing clockwise
How to find how the compasses pointOnce the current is flowing through the wire, it will generate a magnetic field around it.
The magnetic field will interact with the Earth's magnetic field and cause the compass needles to deflect from their original westward orientation. The direction of deflection will depend on the direction of the current flow in the wire.
Using the right-hand rule, we can determine that the magnetic field around a wire carrying current in the downward direction will have a direction perpendicular to the wire and pointing clockwise when viewed from above. This means that the compass needles will deflect and start pointing in a clockwise direction.
Therefore, the answer is: "A long wire that is vertical and standing on a steel plate. There are 4 compasses surrounding it and all of the needles are pointing clockwise."
Learn more about current at:
https://brainly.com/question/20118982
#SPJ1
Answer:
It's the third one
Explanation:
C.
The term associated with such strange hypothetical scenarios is ""Maxwell’s demon. "" Imagine this randomly weird world for a minute. Then describe something that would make it very difficult (or at least interesting) to live in a Maxwell’s-demon world. Also explain why you think these strange events don’t happen on a random basis in real life
In a Maxwell's-demon world, physical processes would be unpredictable, making it difficult to live. However, these strange events don't occur randomly in reality due to the second law of thermodynamics, ensuring predictability and consistency in physical processes.
In a Maxwell's-demon world, where the second law of thermodynamics is violated, it would be very difficult to live if physical processes were unpredictable and inconsistent. For example, if a person couldn't predict the behavior of objects or if the laws of physics randomly changed, it would make it nearly impossible to live in such a world. This would be because the everyday processes and technological devices we rely on wouldn't work consistently, leading to chaos and unpredictability.
These strange events don't happen on a random basis in real life because of the second law of thermodynamics, which states that entropy in a closed system can only increase or remain constant over time. Thus, it is impossible for a system to continuously extract work without a corresponding increase in entropy. Real-life systems are subject to this law, leading to predictability and consistency in physical processes.
Learn more about thermodynamics here: brainly.com/question/1368306
#SPJ4
6. A student placed a cardboard box at the
bottom of a hill. The student then released a
ball from a point on the hill. The ball collided
with the box, and the box moved a distance
of 2 meters before both the box and the ball
came to rest. Which change to the initial
conditions would be most likfly to result in
the box moving a greater distance?
A. Decreasing the mass of both the ball and the
box
B. Decreasing the mass of the ball and
increasing the mass of the box
C. Increasing the mass of the ball and
releasing it from a lower point on the hill
D. Decreasing the mass of the box and
releasing the ball from a higher point on
the hill
The correct option for the given question is D. Decreasing the mass of the box and releasing the ball from a higher point on the hill.
A cardboard box was placed at the bottom of a hill, and a ball was released from a point on the hill. The box moved a distance of 2 meters before coming to rest, along with the ball. To move the box a greater distance, a change in the initial conditions is required. It can be achieved by decreasing the mass of the box and releasing the ball from a higher point on the hill.
According to the law of conservation of momentum, the total momentum before and after the collision is conserved. If the mass of the box is decreased, its momentum will be less after the collision. Therefore, the momentum of the ball will be greater than the momentum of the box, allowing it to move the box to a greater distance. Thus the correct option is Option D.
For such more questions on momentum :
brainly.com/question/1042017
#SPJ11
26. A container has 2.5 litres of water at 20C. How much heat is
required to boil the water?
a) 840000 J
c) 880000 J
b) 800000 J
d) 900000J
Rough Surface with: Ms = 0. 8 HK = 0. 4
(a) Find the magnitude of the
force F needed to prevent the
book from sliding down the
rough wall.
F
M = 1. 5 kg
600
(b) Find the minimum force F
needed to set the book in
motion up the rough wall with
constant velocity
a) The magnitude of the force F needed to prevent the book from sliding down the rough wall is 6 N.
b) The minimum force F needed to set the book in motion up the rough wall with constant velocity is 6 N, which is equal to the force of friction acting on the book.
a) To find the magnitude of the force F needed to prevent the book from sliding down the rough wall, we need to consider the forces acting on the book. There are two forces acting on the book: the force of gravity, which pulls the book downward with a force of mg = (1.5 kg)(9.81 m/s^2) = 14.715 N, and the force of friction, which acts in the opposite direction of motion.
The force of friction can be calculated using the formula:
f = μN
where μ is the coefficient of friction (js = 0.8), and N is the normal force acting perpendicular to the surface of the wall. Since the wall is at an angle of 60 degrees to the horizontal, the normal force can be calculated as:
N = mg cos θ = (1.5 kg)(9.81 m/s^2) cos 60° = 7.5 N
Substituting the values, we get:
f = μN = (0.8)(7.5 N) = 6 N
Since the book is not moving, the force F acting on it must be equal and opposite to the force of friction, i.e., F = f = 6 N.
Therefore, the magnitude of the force F needed to prevent the book from sliding down the rough wall is 6 N.
b) To find the minimum force F needed to set the book in motion up the rough wall with constant velocity, we need to consider the forces acting on the book again. Since the book is moving with constant velocity, the net force acting on it must be zero. Therefore, the force of friction must be equal and opposite to the force F applied to the book.
The force of friction can be calculated as before, using the formula:
f = μN = (0.8)(7.5 N) = 6 N
To find the minimum force F needed to set the book in motion up the wall, we need to overcome the force of friction. Therefore, we need to apply a force greater than or equal to the force of friction. If we apply a force slightly greater than 6 N, the book will start moving up the wall with an acceleration
Learn more about force of friction here
brainly.com/question/8935141
#SPJ4
The given question is incomplete, the complete question is:
Rough Surface with: js = 0.8 HK = 0.4 (a) Find the magnitude of the force F needed to prevent the book from sliding down the rough wall m= 1.5kg , θ=60degree b)Find the minimum force F needed to set the book in motion up the rough wall with constant velocity
he pyramidal motor tract carries signals from the motor cortex of each cerebral hemisphere to side(s) of the spinal cord, whereas the extrapyramidal motor tracts carry signals from various subcortical structures to side(s) of the spinal cord.
The pyramidal motor tract carries signals from the motor cortex of each cerebral hemisphere to the opposite (contralateral) side of the spinal cord, whereas the extrapyramidal motor tracts carry signals from various subcortical structures to both sides (bilateral) of the spinal cord.
The pyramidal motor tract is responsible for voluntary movement and fine motor control, while the extrapyramidal motor tracts are responsible for involuntary movement, and muscle tone, and the pyramidal motor tract, also known as the corticospinal tract, is a collection of nerve fibers that originates in the motor cortex of each cerebral hemisphere and descends through the brainstem and spinal cord. posture. Both tracts are important for coordinating and controlling motor functions in the body.
To learn more about Pyramidal :
https://brainly.com/question/13961844
#SPJ11
A radio waves transmitted from a certain radio station is represented by the wave equation: y=0.75 sin〖(0.67πx-2×10^8 πt)〗
Calculate the (i) wavelength of the wave (ii) frequency of the wave (ii) velocity of the wave. Where x, y are in meters while t is in seconds
The frequency of a wave is the number of times a wave passes a point in a given amount of time. It is calculated by the formula: f = v/λ, where v is the velocity of the wave and λ is the wavelength of the wave.
What is velocity?Velocity is a vector quantity that measures the rate and direction of an object's change in position over a specific period of time. It is the rate at which an object moves from one point to another, expressed as distance over time. Velocity is commonly expressed in meters per second (m/s) or kilometers per hour (km/h). Velocity is a fundamental concept in physics and is often used to calculate other physical quantities such as force, acceleration, momentum, and kinetic energy. Velocity is a crucial element in the study of motion and is related to the concepts of speed, displacement, and acceleration.
In the given equation, y = 0.75 sin〖(0.67πx-2×10^8 πt)〗
(i) Wavelength: The wavelength of a wave is the distance between two consecutive points of a wave. It is calculated by the formula: λ = v/f, where v is the velocity of the wave and f is the frequency of the wave.
In the given equation, y = 0.75 sin〖(0.67πx-2×10^8 πt)〗
We know that, v = λf
So,
λ = v/f = (2×10^8 πt)/0.67π
= 3×10^7 t
Therefore, the wavelength of the wave is 3×10^7 t meters.
To learn more about velocity
https://brainly.com/question/29223620
#SPJ9
COLOR LOCK-Arrange Letters in an order (First Letter Only - R = Red, B = Blue,
Brown, Black, Y = Yellow, etc. ) (ALL CAPS)
Help
In alphabetical order the sequence will be: Black, Blue, Brown, Yellow.
Character strings are arranged according to their positions in the traditional alphabetical ordering using the alphabetical order method. It is one of the sorting techniques. Lexicographical ordering in mathematics is the extension of alphabetical ordering to other data categories, such as number sequences or other ordered mathematical objects.
The alphabetical order is typically known as a lexicographical order when applied to strings or sequences that may also contain digits, numbers, or more complex kinds of elements.
To know more about alphabetical order go through:-
https://brainly.com/question/26971639
#SPJ4
Rearranging the letters in COLOR LOCK while assigning colors based on their first letter yields the sequence COKLORC.
Assigning colors based on the first letter of each letter in COLOR LOCK results in the following sequence: COKLORC. The first letter "C" can be assigned to the color cyan, which is a combination of blue and green. The letter "O" can be assigned to the color orange, which is a warm color made from a mix of red and yellow. The letter "K" can be assigned to the color black, which is a classic and versatile hue. The second "L" can be assigned to the color lavender, which is a light shade of purple. The "O" can be assigned to the color olive, which is a yellowish-green hue. The letter "R" can be assigned to the color red, which is a vibrant and energetic color. Lastly, the letter "C" can be assigned to the color cyan once again.
learn more about Rearranging here:
https://brainly.com/question/29668964
#SPJ4
Consider the diagram of a pendulum's motion shown above. A pendulum can be used to model the change from potential energy to kinetic energy and back to potential energy. If you pull the bob back to point A and release it, potential energy is converted to kinetic energy. What do you think happens to the energy at point C?
A Potential energy is converted to kinetic energy.
B Potential energy decreases.
C Kinetic energy increases.
D Kinetic energy is converted to potential energy.
At point C of a pendulum's motion, kinetic energy is converted back into potential energy.
As the pendulum bob moves upward from the lowest point of its swing, its speed decreases and its potential energy increases. At point C, the pendulum bob has stopped momentarily, so it has no kinetic energy. However, it has gained potential energy as a result of its increased height. As the pendulum bob continues to move upward towards point D, its potential energy will continue to increase, while its kinetic energy decreases.
Therefore, the correct answer is D, Kinetic energy is converted to potential energy.
What is potential energy?
Potential energy is a form of energy that an object possesses due to its position or configuration in a system. It is the energy that an object has because of its position relative to other objects, or because of the forces acting on it.
What is kinetic energy?
Kinetic energy is the energy that an object possesses due to its motion. It is a form of energy that an object has because of its speed and mass. The formula for kinetic energy is:
KE = 1/2 * m * v^2
where KE is the kinetic energy, m is the mass of the object, and v is the velocity of the object.
To know more about potential energy, visit:
https://brainly.com/question/24284560
#SPJ1