Answer:
51.1 g NH3
The required chemical reaction is given by:
N2 + 3H2 --> 2NH3
4.5 mol H2 × (2 mol NH3/3 mol H2) = 3 mol NH3
molar mass of NH3 is 17.031 g/mol
3 mol NH3 × (17.031 g NH3/1 mol NH3) = 51.1 g NH3
When 1 mol of a nonvolatile, nondissociating solute is dissolved in 3 mol of volatile solvent, the ratio of vapor pressure of the solution to that of the pure solvent (at the same temperature) is approximately:________
Answer:
[tex]\frac{P_{solution}}{P_{solvent}^{vap}} =0.75[/tex]
Explanation:
Hello there!
In this case, since the solvation of a nonvolatile-nondissociating solute in a volatile solvent is modelled via the Raoult's law:
[tex]P_{solution}=x_{solvent}P_{solvent}^{vap}[/tex]
Thus, we can calculate the ratio of the vapor pressure of the solution to that of the pure solvent, mole fraction, as shown below:
[tex]x_{solvent}=\frac{P_{solution}}{P_{solvent}^{vap}} =\frac{n_{solvent}}{n_{solute}+n_{solvent}}[/tex]
Thus, we plug in the moles of solvent and solute to obtain:
[tex]\frac{P_{solution}}{P_{solvent}^{vap}} =\frac{3}{3+1}\\\\ \frac{P_{solution}}{P_{solvent}^{vap}} =0.75[/tex]
Regards!
Calculate the specific heat of a substance given that 49 joules of heat is required to raise the temperature of 25.0 g of the substance from 92.6 ºC to 99.4 ºC.
Answer:
0.29 J/g.°C
Explanation:
Step 1: Given data
Added heat (Q): 49 JMass of the substance (m): 25.0 gInitial temperature: 92.6 °CFinal temperature: 99.4 °CStep 2: Calculate the temperature change (ΔT)
ΔT = 99.4 °C - 92.6 °C = 6.8 °C
Step 3: Calculate the specific heat of the substance (c)
We will use the following expression.
Q = c × m × ΔT
c = Q / m × ΔT
c = 49 J / 25.0 g × 6.8 °C = 0.29 J/g.°C
Se prepara una concentración molar 0.5M de hidróxido de sodio (NaCH) con la finalidad de determinar el grado de acidez de una bebida embotellada. Calcula la cantidad de gramos de hidróxido de sodio (NaCH) que se requiere para preparar 5 litros de dicha solución.
Answer:
100 g
Explanation:
Primero hay que calcular el número requerido de moles de NaOH, usando la definición de molaridad:
Molaridad = moles / litros0.5 M = moles / 5 Lmoles = 2.5 molesAhora hay que convertir 2.5 moles de NaOH en gramos, usando su masa molecular:
2.5 mol * 40 g/mol = 100 gSe requieren 100 gramos de NaOH.
Assuming a half life of 1599 years, how many years will be needed for the decay of 15/16 of given amount of radium-226
Answer:
1
Explanation:
What answer is it and how ? please help !!!!!! ill mark brainlyest if right
Answer:
The answer is B
Brainliest please!
A newborn blue whale measures 6.0 to 7.9 m long and weighs up to 3003 kg. The blue whale produces the loudest sound by any living animal, 188 dB and can be detected as far as 850 000 m away. What is the total number of significant figures in all these trivia?
How many L of 3.0M solution
can be made with 78g of
NaCl?
Answer:
Need to find moles NaCl.
526 grams NaCl (1 mole NaCl/58.44 grams)
= 9.0 moles NaCl
----------------------------------------------------
now,
Molarity = moles of solute/Liters of solution
or, for our purposes
Liters of solution = moles of solute/Molarity
Liters of solution = 9.0 moles NaCl/3.0 M
= 3.0 liters in volume
To obtain pure lead, lead (II) sulfide is burned in an atmosphere of pure oxygen. The products of the reaction are lead and sulfur trioxide (SO3). Write a balanced chemical equation for this process. How many grams of lead will be produced if 2.54 grams of PbS is burned with 1.88 g of O2? Express your answer to the correct number of significant figures. Be sure to show all steps completed to arrive at the answer. (Hint: be sure to work the problem with both PbS and O2).
Answer: 2.20 g Pb
They gave us the masses of two reactants and asked us to determine the mass of the product. We will need a chemical equation with masses and molar masses, so, let's gather all the information in one place.
Mᵣ: 239.27 32.00 207.2
2PbS + 3O₂ ⟶ 2Pb + 2SO₃
m/g: 2.54 1.88
What is the hydrogen ion concentration of a solution with pH=7.75 ?
Answer:
[tex][H^+]=1.78x10^{-8}M[/tex]
Explanation:
Hello there!
In this case, according to the given information about the pH, it is firstly necessary for us to remember that the pH is defined as the potential of the hydrogen ions in the solution and the concentration of those ions represents how many of them are present in the solution; in such a way, it is possible for us use:
[tex]pH=-log([H^+])[/tex]
Whereas the concentration of hydrogen ions can be calculated as follows:
[tex][H^+]=10^{-pH}[/tex]
So we plug in the given pH to obtain:
[tex][H^+]=10^{-7.75}=1.78x10^{-8}M[/tex]
Regards!
2. According to decreasing ionization energy
Cr
со
Fe
V
Mn
Answer: V, Mn, Cr, Fe, Co
Explanation: all elements belong to 4th period. Ionization energy increases from
Left to right
In the acetylene torch, acetylene gas (C2H2) burns in oxygen to produce carbon dioxide water and energy. How many moles of CO2 are formed from the reaction with 1.20 moles of C2H2?
Given the following equation
2C2H2(g) + 502(g) = 4CO2(g) + 2H2O(g)
Answer: 2.40 moles of [tex]CO_2[/tex] will be formed in the reaction.
Explanation:
Given values:
Moles of [tex]C_2H_2[/tex] = 1.20 moles
The given chemical equation follows:
[tex]2C_2H_2+5O_2\rightarrow 4CO_2+2H_2O[/tex]
By the stoichioemetry of the reaction:
If 2 moles of [tex]C_2H_2[/tex] produces 4 moles of carbon dioxide
Then, 1.20 moles of [tex]C_2H_2[/tex] wil produce = [tex]\frac{4}{2}\times 1.20=2.40mol[/tex] of carbon dioxide
Hence, 2.40 moles of [tex]CO_2[/tex] will be formed in the reaction.
Determine the number of molecules of C2CI4 contained in 73.1g of C2CI4
Answer:
2.35x10²³ molecules of C2Cl4 are present
Explanation:
To solve this question we must convert, as first, the mass of C2Cl4 to moles using its molar mass (C2Cl4 = 165.83g/mol). Then, using Avogadro's number we can find the number of molecules:
Moles C2Cl4:
73.1g * (1mol / 165.83g) = 0.441 moles C2Cl4
Molecules:
0.441 moles C2Cl4 * (6.022x10²³molecules / 1mol) =
2.35x10²³ molecules of C2Cl4 are presentsuggest reasons why it is necessary to standardise HCl and NaOH solutions
Answer:
look at explanation
Explanation:
the actual concentration of the NaOH solution has to be determined experimentally using a process called standardization. To standardize a base solution such as NaOH, an acid whose amount can be determined to a high degree of accuracy (called a primary standard) is needed.
Hope this helps!
Help Anyone! What would be the correct answer to this question?
A solid sample is hit with a hammer and breaks into jagged, irregular shards. What type of solid was it? A) molecular solid b) network solid c) ionic solid d)metallic solid
I honestly don't know the answer
At which temperature is water in its gas phase (water vapor)?
Group of answer choices
-40
40
140
g When a species can be represented by two or more resonance structures, the actual representation of bonding in the species is given by: A. the resonance structure with no multiple bonds B. the resonance hybrid of all structures C. the best resonance structure D. the resonance structure with no lone pairs on the central atom. E. the resonance structure with the most multiple bonds
Answer:
B. the resonance hybrid of all structures
Explanation:
The idea of resonance is used to explain bonding in compounds where a single structure does not fully account for all the bonding interactions in a molecule.
A number of equivalent structures are then used to show the nature of bonding in such a molecule. Such structures are called resonance structures or canonical structures. None of these structures individually offer a holistic explanation to the bonding interactions in the molecule under study.
However, a hybrid of all the canonical structures does explain the nature of bonding in the molecule.
Answer:
B. the resonance hybrid of all structures
Explanation:
When a species can be represented by two or more resonance structures, the actual representation of bonding in the species is given by: the resonance hybrid of all structures
Please help will give brainliest to right answer!!
You add 1.5 moles of HF to 6 liters of water. The concentration is at equilibrium when [H+] is at 0.10 M. What is the Ka of HF? HF -> H+ + F-.
A) 0.067
B) 0.10
C) 0.25
D) 1.5
Answer:
C
Explanation:
NP
1. Arrange the following groups in order of decreasing priority that would allow you to determine E/Z, or R/S. Provide a string of letters (e.g. abcd) as an answer with the highest priority listed first, lowest priority last:a) -CH3
b) -CH2OH
c) -CH2NH2
d) -CH2BR2. Arrange the following groups in order of decreasing priority that would allow you to determine E/Z, or R/S. Provide a string of letters (e.g. abcd) as an answer with the highest priority listed first, lowest priority last:a) -F
b) -CH2OH
c) -CHO
d) -CH3
Answer:
1. CH₂Br > CH₂OH > CH₂NH₂ > CH₃
2. -F > -CHO > - CH₂OH > CH₃
Explanation:
The arrangement of the above atom is due to their atomicity and electronegativity of the given compounds.
From (1) we will realize that Bromine (Br) possesses the greatest priority because its atomic number is the highest. This is followed by oxygen (O) in CH₂OH since atomic no 8 is higher than that of Nitrogen N(7). Lastly, CH₃ has the only hydrogen attached to it with the atomic no of (1)
In the second part of the question>
The electronegativity of an element increases across the period and down the group. Fluorine is highly electronegative and contains the highest atomic number of oxygen in -CHO. The oxygen (O) in -CHO has a double bond which gives an edge over the (O) in CH₂OH. Lastly, CH₃ contains a substituted hydrogen atom
Write the structure of all possible peptides containing these amino acids: Asp, Glu, Gln Use single letter abbreviations and capital letters only; i.e. GYR, not Gly-Tyr-Arg. If there are fewer than 6 peptides, leave an appropriate number of answer boxes empty. fill in the blank 1 , fill in the blank 2 , fill in the blank 3 , fill in the blank 4 , fill in the blank 5 , fill in the blank 6
Answer:
QED, EDQ, DQE, EQD, DEQ, QDE
Explanation:
The structure of all possible peptides that contain the given amino acids are :
QED, EDQ, DQE, EQD, DEQ, QDE
where : Asp is represented by the letter code D
Glu is represented by the letter code E
Gln is represented by the letter code Q
Note : when three amino acids combine they form what is known as tripeptide ( i.e. contains two peptide linkages ) while a peptide linkage is been formed by the combination of a carboxyl group of an amino acid and the amino group of different amino acid
Ammonia will decompose into nitrogen and hydrogen at high temperature. An industrial chemist studying this reaction fills a 5.0L flask with 4.5 atm of ammonia gas, and when the mixture has come to equilibrium measures the amount of nitrogen gas to be 1.1 atm. Calculate the pressure equilibrium constant for the decomposition of ammonia at the final temperature of the mixture. Round your answer to 2 significant digits.
Answer:
Kp = 7.4727
Explanation:
Let's write the balanced equilibrium reaction:
2NH₃ <-------> N₂ + 3H₂ Kp = ??
Now, if we want to calculate the Kp, we need to write an ICE chart with this reaction, which is the following:
2NH₃ <-------> N₂ + 3H₂
I. 4,5 0 0
C. -2x +x +3x
E. 4,5-2x x 3x
According to this chart, the Kp expression should be:
Kp = (PH₂)³ * (PN₂) / (PNH₃)² (1)
The value of x, we already know it because the problem states that the amount of nitrogen gas is 1.1 atm, so replacing this value into (1) we have:
Kp = (3*1.1)³ * (1.1) / (4.5 - (2 * 1.1))²
Kp = 39.5307 / 5.29
Kp = 7.4727Hope this helps
1. Alexa and her family travelled 5 hours south east on 1-45 to crystal
beach this summer for vacation. If the trip was a total of 340 miles,
what was her average speed?
EQUATION
PLUG N NUMBERS
INTO THE EQUSTION
ENALANSWER WITH
UNTS
Answer:
Average speed = 68 mph
Explanation:
Given that,
Total distance traveled by the family, d = 340 miles
The family traveled 5 hours southeast.
We need to find her average speed. The speed of an object is given by the total distance covered divided by time taken. So,
[tex]v=\dfrac{d}{t}[/tex]
Put all the values,
[tex]v=\dfrac{340}{5}\\\\v=68\ mph[/tex]
So, her average speed is equal to 68 mph.
12 moles of sodium into grams
Answer:
12 moles sodium= 275.87724000000003 grams
Explanation:
1 moles sodium = 0.043497607849056.
A binary covalent bond exists between
A.any element
B.2 nonmetals
C.1met and 1 nonmetal
D.2 metals
Answer:
B
Explanation:
Double Covalent bonds or as you say "binary" bonds consists of 2 non-metals only, nothing else.
Hope this helps!
How do you calibrate an electronic analytical balance
Explanation:
For the calibration process, use a weight that is 50% of the scale's capacity for accurate calibration. Weights less than 10% can result in inaccuracy. Make sure that the scale doesn't have any weights placed on it and nothing is rubbing against the scale or the platform.
Which type of reaction is represented by this graph?
Potential energy
Reaction progress
A. Synthesis
B. Endothermic
C. Decomposition
D. Exothermic
Answer:
D. Exothermic .
Explanation:
Hello there!
In this case, since the potential energy versus reaction progress diagrams are related to the energetic profile of a chemical reaction, we can set the initial point at the beginning of the reaction as the energy of the reactants and the final point as the energy of the products.
Next, since the change in the enthalpy of a reaction is quantified by subtracting products minus reactants, we can see that the products have less energy than the reactants and therefore ΔH for this reaction is negative, which matches with the definition of D. Exothermic reaction.
Regards!
1. What would happen to an inflated balloon it were to be placed in a cold environment?
The balloon would inflate more
The balloon would pop
The balloon would float away
The balloon would deflate
Answer:
The balloon would deflate
Explanation:
What volume is occupied by 2.0 mol of gas at 3.0 atm
and 27 °C?
When calcium forms an ion that has the same number of outer electrons as which noble gas?
1. neon
2. helium
3. argon
4. krypton
BRAINLIEST FOR HELP ASAP!!!!
PLEASEEE HELPPP WILL MARK BRAINLIEST FOR RIGHT ANSWER!!!
You have an unknown concentration of 0.035 L of HCl acid and added 0.033 L of 0.3 M NaOH before the equivalence point was reached. What is the concentration of the HCl?
HCl + NaOH -> H2O + NaCl
A) 0.28 M HCl
B) 0.11 M HCl
C) 0.035 M HCl
D) 3.14 M HCl
Answer:
A
Explanation:
Answer:
C
Explanation:
Pretty sure!