a solid sphere of mass and radius 20kg and 4m is rotating with an angular velocity of 40rad/sec is accelerated uniformly to 60rad/sec in 2sec what is the torque acting on the sphere? (I=0•4MR^2)​

Answer:

Explanation:

Quantum theory has taught us that virtually everything to do with the nature of matter in the universe is a random process. The decay of atomic nuclei is something that makes that randomness "visible" with appropriate instrumentation. As such, the rate of decay will vary over the "short" term. Consequently, it is not surprising to see a variation of a few counts in an activity measurement over a period of a few minutes.

__

Safety with respect to radioactive materials involves staying as far away from them as possible. The use of long tongs for handling would be appropriate.

Answer:

↔ for safety precautions the scientist should used this upon working with radioactive materials in a laboratory.

Answer:

i'll answer your question but follow me first

Answer:

Ex = [tex]2 k q \frac{x}{(x^2 + z^2) ^{3/2}}[/tex] ,  E_z =0

Explanation:

To find the electric field of each charge, let's use

          E = k q / r²

where the field for a positive charge is outgoing and for a negative charge it is incoming.

Since the electric field is a vector magnitude, let's add its components at the point z

X axis

       Eₓ = E₁ₓ + E₂ₓ

       Eₓ = 2 E₁ₓ

Z axis

       E_z = E_{1z} -E_{2z}

       E_z= 0

Let's find the expression for the electric field

the distance from the charge to the test point, using the Pythagorean theorem is

      r² = (x-0) ² + (0-z) ²

      E = [tex]k \frac{q}{x^2 + z^2}[/tex]

with trigonometry we can find its components

      cos θ = E₁ₓ / E

      E₁ₓ = E cos θ

we substitute

     Eₓ = 2 E cos θ

where the cosine

    cos θ = x / r

     Ex = [tex]2 k \frac{q}{x^2 + z^2} \ \frac{x}{\sqrt{x^2 + z^2} }[/tex]

     Ex = [tex]2 k q \frac{x}{(x^2 + z^2) ^{3/2}}[/tex]

     E_z = 0

Answer:

[tex]f=7.5\times 10^{14}\ Hz[/tex]

Explanation:

Given that,

The wavelength of light, [tex]\lambda=400\ nm=400\times 10^{-9}\ m[/tex]

The speed of light, [tex]c=3\times 10^8\ m/s[/tex]

We need to find the frequency of light. We know that,

[tex]c=f\lambda[/tex]

Where

f is the frequency

So,

[tex]f=\dfrac{c}{\lambda}\\\\f=\dfrac{3\times 10^8}{400\times 10^{-9}}\\\\f=7.5\times 10^{14}\ Hz[/tex]

So, the frequency of light is [tex]7.5\times 10^{14}\ Hz[/tex].

Answer:

B. 6

Explanation:

i think... im in 7th grade and haven't really leaned this but im like 60% sure but i migjt be wrong

Answer:

your answer is B 6 protons

Explanation:

since the atomic number for carbon is 6 it also represents the number of protons and electrons

Iron ( Fe ) is a micro element that is essential for the formation of haemoglobin.

Hemoglobin has two components-

Answer:

 m = 4.0

Explanation:

For this exercise in geometric optics we will use the equation of the constructor

         [tex]\frac{1}{f} = \frac{1}{p} + \frac{1}{q}[/tex]

where f is the focal length, p and q are the distance to the object and image, respectively.

In the exercise indicate the focal length f = 2.00 cm, the distance to the object p = 1.60 cm, let's find the distance to the image

         [tex]\frac{1}{q} = \frac{1}{f} - \frac{1}{p}[/tex]

let's calculate

         [tex]\frac{1}{q} = \frac{1}{2} - \frac{1}{1.6}[/tex]1 / q = ½ - 1 / 1.6

         [tex]\frac{1}{q}[/tex] = -0.125

         q = -8 cm

the magnification is

        m = - q / p

        m = 8/2

        m = 4.0

Answer:

It’s C

Explanation:

Answer:

its the area method

Explanation:

i did it on edge nuity and i got it correct.

Answer:

do not require a medium

Explanation:

Light waves can be regarded as electromagnetic waves and it transverse in nature, no medium material is required to pass through. Light wave can travel through vacuum and it's ray can travel in straight lines even from point source. Light convey energy in perpendicular direction to electric field as well as magnetic field.

Answer:

25

Explanation:

I just did this

Answer:

Newton's second law of motion?

Answer:

Velocidad final, V = 8 m/s

Explanation:

Dados los siguientes datos;

Velocidad inicial, u = 4 m/s

Aceleración, a = 2 m/s²

Tiempo, t = 2 segundos

Para encontrar la velocidad final (v), usaríamos la primera ecuación de movimiento;

V = u + at

Sustituyendo en la fórmula, tenemos;

V = 4 + 2*2

V = 4 + 4

Velocidad final, V = 8 m/s

Answer:

A

Explanation:

I took the test

Answer:

They do that by converting rotating mechanical energy into electrical power. Portable generators use an engine—typically running on gasoline, diesel, or propane, to turn an alternator which produces alternating electrical current or AC.

Answer:

germ cleaning

and getting up cooking grease

Explanation:

Answer:

PRESSURE is a force exerted by the substance per unit area on another substance.

The key difference between water pressure and air pressure is that one is made up of water and the other is made up of air. Both air pressure and water pressure are based on and follow the same physical principals.

Explanation:

Answer:

1. Mike was riding in the wagon when it had the most acceleration because his light weight compared to Tim's weight required the least effort to move

2. Mike

Explanation:

According to Newton's second law of motion, force is proportional to te rate of change of momentum produced

Mathematically, we can write the above law as follows;

F = m × a

Where;

F = The force acting on the object

m = The mass of object in motion

a = The acceleration of the object

1. The given parameters in the question are;

The weight of Tim = 311 Newtons (70 lbs.)

The weight of Mike = 50 Newtons (50 lbs.)

The minimum force required to pull the wagon to constant speed = The weight of the wagon

With the assumption that the wagon has very little weight, we have

Therefore, when Tim gets in the wagon, the force, 'F' applied by Mike to pull the wagon to constant speed = Mass of Tim, m × Acceleration of the cart, a

Given that mass is proportional to weight, we can write;

Force from mike, Tim on the wagon F₁ = 311 N × a₁

Similarly when they switched places, we have;

Force from Tim, Mike on the wagon  = F₂ = 50 N × a₂

Therefore, for the same force, F₁ = F₂ = F, we have;

a₁ = F₁/(311 N) = F/(311 N)

a₂ = F₂/(50 N) = F/(50 N)

By fraction of numbers, F/(50 N) > F/(311 N) > N), therefore, a₂ > a₁

The acceleration of the wagon when Mike was on the wagon will be more than the acceleration of the wagon when Tim gets in the wagon because for the same applied force, the weight of Mike offer less resistance to move

2. Given that Sare and Mike have the same weight of 50 N each let F₃ represent the force with which she pulls Mike in the wagon, and F₁ represent the force with which Mike pulls her while she is on the wagon, we  are also given that F₃ > F₁

By Newton's second law of motion, we have;

a₃ = F₃/(50 N) and a₁ = F₁/(50 N)

From F₃ > F₁, we have;

F₃/(50 N) > F₁/(50 N)

Therefore;

a₃ > a₁

The acceleration of the wagon when Mike is being pulled by Sare, a₃, is greater than the acceleration of the wagon when Sare is pulled by Mike

Therefore, Mike is on the wagon when it has the greatest acceleration.

exothermic

Explanation:

negative means it's losing energy

Explanation:

Frictional force causes a lot of losses in general upkeep and wear and tear of machinery. Hence it is considered as a evil. But almost all crucial tasks cannot be carried out without the presence of friction. ... Hence it is considered as a necessary evil .

Explanation:

Frictional force causes a lot of losses in general upkeep and wear and tear of machinery. Hence it is considered as a evil. But almost all crucial tasks cannot be carried out without the presence of friction. ... Hence it is considered as a necessary evil .

Answer:

vz vc

Explanation:

v b

Answer:

0.19 and 0.45

Explanation:

edge

The first and second velocities of the car are [tex]0.25/t_1[/tex] and [tex]0.50/t_2[/tex]respectively.

The velocity of an object is defined as the product of the distance travelled in a given direction and the time required to travel that distance. The velocity is expressed mathematically as,

v = d/t

Here, d represents the travelled distance.

And t is the typical amount of time needed to go the distance.

Given,

The value of the first distance is, d1 = 0.25 m.

The value of the second distance is, d2 = 0.50 m.

Then the first velocity of the car at 0.25 m is,

[tex]v_1 = d_1/t_1\\v_1 = 0.25 / t_1[/tex]

Thus,[tex]t_1[/tex] denotes the first distance's typical time.

The second velocity of the car with three washers at the 0. 50 m mark is

[tex]v_2 = d_2/t_2\\v_2 = 0.50 /t_2[/tex]

Here, [tex]t_2[/tex] stands for the second distance's typical time.

Thus, the first and second velocities of the car are [tex]0.25/t_1[/tex] and [tex]0.50/t_2[/tex]respectively.

Learn more about Velocity, here:

brainly.com/question/25796948

#SPJ2

Answer:

The answer is "perpendicular and distance".

Explanation:

The Perpendicularity would be the connection of two lines that meet in such a right angle perpendicularity (90 degrees). It extends to all geometric objects involved.

The Distance was its cumulative motion of a body regardless of the direction that's why the value "d" is perpendicular to the distance from the transformer.

Answer:

Wavelength of light in  diamond λ2 = 179.75 nm (Approx.)

Explanation:

Given:

Blue light of wavelength λ1 = 435 nm

n2 in diamond = 2.42

Find:

Wavelength of light in  diamond λ2

Computation:

Since the wavelength is smaller, the frequency stays constant. The frequency of vibrations does not shift when they pass from one source to the next.

So,

n1λ1 = n2λ2

(1)(435) = (2.42)λ2

Wavelength of light in  diamond λ2 = 179.75 nm (Approx.)

Answer:

180

Explanation:

got it right on acellus

Answer:

The building are not getting farther and farther away, road signs, exits, other cars

Explanation:

Answer:

24 N

Explanation:

Given,

Unstretched length or original length , x1 = 12cm

Stiffness constant, k = 8 N/cm

Load required to take spring to a length , x2 of 15cm

Recall the relation :

F = Ke

Where, e = extension

e = x2 - x1

e = (15 - 12) = 3

F = ke

F = 8 N/cm * 3cm

F = 24 N/cm*cm

F = 24 N

Hence, required load = 24 N

Answer:All the forces are acting. The force due to which the car stops that is between road and tire is "friction".

Explanation:

Add varying numbers of weights to M1 and measure the speed of the car.

Add varying numbers of weights to M2 and measure the speed of the cart.

In order to test the changing amount of force that is acting on the object has effect on the average speed of the object we have to change the amount of weight on the object and allows it to move to a certain point in this way we can check the effect of changing amount of weight on the speed of the object.

Learn more about weight here: https://brainly.com/question/2337612