Answer:
[OH-] = 2 x 10^-6 M
Explanation:
Calculate pOH first: 14 - pH = pOH --> pH = 14 - 8.3 = 5.7
[OH-] = 10^-pOH = 10^-5.7 = 2 x 10^-6 M
Only one sig fig in the concentration, because the pH only had one decimal place.
Why does nobody fking answer my questions.
How did stromatolites contribute oxygen to the early atmosphere?
through methane degradation
through photolysis
by weathering of rocks
through photosynthesis
Answer:
by wearing of rocks
Explanation:
earths gravity your welcome
Answer:
weathering of rocks is the answer to your question
Solve this puzzle
R+R
An emulsion is a suspension of a in a liquid.
Explanation:
An emulsion is a suspension of two liquids that actually do not mix together.these liquids that do not mix are said to be immiscible .an example :-
would be oil and water.lf you mix oil and water and shake them a cloudy suspension is formed
this is correct answer
I hope it's helpful for u....
In general, the Hippocratic Oath requires physicians to do all of the following EXCEPT which action?
treat every ill patient
do no harm
help their patients as best they can
maintain the privacy of their patients
Answer:
Physicians do not have to treat every ill patient. However they must uphold their ethics (eg. do no harm, confidentiatlity, etc.).
Explanation:
Primary source:
Hippocratic Oath (translation since it's originally in Greek)
I swear by Apollo the physician, and Asclepius, and Hygieia and Panacea and all the gods and goddesses as my witnesses, that, according to my ability and judgement, I will keep this Oath and this contract:
To hold him who taught me this art equally dear to me as my parents, to be a partner in life with him, and to fulfill his needs when required; to look upon his offspring as equals to my own siblings, and to teach them this art, if they shall wish to learn it, without fee or contract; and that by the set rules, lectures, and every other mode of instruction, I will impart a knowledge of the art to my own sons, and those of my teachers, and to students bound by this contract and having sworn this Oath to the law of medicine, but to no others.
I will use those dietary regimens which will benefit my patients according to my greatest ability and judgement, and I will do no harm or injustice to them.
I will not give a lethal drug to anyone if I am asked, nor will I advise such a plan; and similarly I will not give a woman a pessary to cause an abortion.
In purity and according to divine law will I carry out my life and my art.
I will not use the knife, even upon those suffering from stones, but I will leave this to those who are trained in this craft.
Into whatever homes I go, I will enter them for the benefit of the sick, avoiding any voluntary act of impropriety or corruption, including the seduction of women or men, whether they are free men or slaves.
Whatever I see or hear in the lives of my patients, whether in connection with my professional practice or not, which ought not to be spoken of outside, I will keep secret, as considering all such things to be private.
So long as I maintain this Oath faithfully and without corruption, may it be granted to me to partake of life fully and the practice of my art, gaining the respect of all men for all time. However, should I transgress this Oath and violate it, may the opposite be my fate.
What is the oxidation number of nitrogen in pb (NO3)2
Answer:
The oxidation number of N in is +5
Explanation:
A force of 792 mN is applied to a substance with a mass of 295,000 mg.
Determine the acceleration of the particle.
Answer:
Acceleration = 2.68 m/s² (Approx.)
Explanation:
Given:
Force = 792 mN = 0.792 N
Mass = 295,000 mg = 0.295 kg
Find:
Acceleration
Computation:
Acceleration = Force / mass
Acceleration = 0.792 / 0.295
Acceleration = 2.68 m/s² (Approx.)
What causes the periodic (recurring)
patterns seen in the periodic table?
how should baking pizza be categorized
Answer: The baking of a pizza should be categorized as an endothermic process because the dough absorbs heat. An endothermic process is a method that absorbs energy from its surroundings which is habitually in the form of energy
Explanation:
Answer:
endothermic; the dough absorbs heat
Explanation:
EDG2020
Plants are able to grow toward the light due to the process known as phototropism. This process takes place inside the plant. Is i Behavioral,structural,or Physiological
Answer:
Physiological
Explanation:
The process whereby plants respond and grow towards light is a physiological process.
Physiological processes are life-sustaining processes that require the combined efforts of cells, tissues, organs, and or systems along with that of biomolecules in the body.
The response of plants to light requires the efforts of a hormone that triggers the rapid mitotic division of cells of tissues/organs that are directly opposite the light source. Thus, the faster rate of division of these cells as compared to the cells of tissues/organs that are directly in contact with light leads to the plant's tissues/organs bending towards the light.
In what way is heat transferred to the tubes? (Hint “touching’”)
Please help
I will give you Brainliest
Answer:
in heat transfer, as the fluid flows along the tube, the wall layers are heated or cooled. temp. variation occurs in the wall layers.
good luck :)
i hope this helps
have a great day !!
A scientists who studies how water moves around is called......
Answer:
A scientists who studies how water moves around is called "Hydrologist".
1. All the individuals of one type of clownfish ( e. species) living in a reef compose which level of organization?
What’s an example of phase change you’ve seen in real life?
Answer:
Melting and boiling will be seen in this example. Condensation might be seen as well. In the Phases of Water Gizmo™, you can heat up or cool down a container of water.
Explanation:
What happens to the energy of gas particles when an elastic collision takes place?
Select one:
a.The more massive gas particle gains energy
b.The least massive gas particle looses energy
c.The more massive gas particle looses energy
d.No energy is exchanged between the gas particles
Answer:
the answer is D
Explanation:
When the elastic collision happens the particles energy does not change. There is no loss or gain of energy due to the elastic collision.
The energy of gas particles when an elastic collision takes place then "No energy is exchanged between the gas particles"
What is elastic collision?A collision between two bodies that would be elastic occurs when their combined kinetic energy stays constant.
What is energy?Energy is the ability to do tasks. It can exist in various forms, including potential, kinetic, thermal, electrical, chemical, and nuclear.
When two objects collide, there was no net loss of kinetic energy across the system. This is known as an elastic collision. In elastic collisions, momentum, as well as kinetic energy would both be conserved.
Therefore the correct answer will be option (d)
To know more elastic collisions and energy
https://brainly.com/question/2356330
#SPJ2
complete the bolded items in each box below
Show the bolded items and the boxes.
the number of ___ in an atom tells you how many chemical bonds that atom can form
In a chemical reaction between copper metal and silver nitrate, 12.7 g of copper(II) and 64.5 g of silver nitrate react, and 38.1 g of Silver is produced. 21) Predict the products and write the balanced equation and include the physical state of each. 22) What type of chemical reaction is this? 23) Which is the limiting reactant? You must include the work for this to receive full credit. 24) What mass of excess is used up, and what mass is left over? 25) Calculate the percent yield.
Answer:What should you do if you realize during research that your original theory is wrong
Explanation:
What is the lanthanide with least mass, periodic table?
Answer:
Europium/Eu ( not really sure )
The lanthanide element with the least mass is Lutetium (Lu)
Lutetium (Lu) is a member of the lanthanide series, which is a group of 15 elements located in the f-block of the periodic table. The lanthanide series starts with the element Lanthanum (La) and ends with Lutetium (Lu). Lutetium is the heaviest and most dense element in the lanthanide series. Lutetium has an atomic number of 71, indicating that it has 71 protons in its nucleus. It has a relatively high atomic mass of approximately 174.97 atomic mass units (u) according to the periodic table.
Hence, lutetium is the lanthanide element with the least mass.
Learn more about lanthanide elements here:
https://brainly.com/question/28305751
#SPJ 6
Which of the following elements is the most reactive?
A. Ba
B. Cs
C. Hf
D. Lu
Answer: Cs because its further to the right on the table, meaning its more reactive.
Explanation:
Answer:
Cs
Explanation:
This element is the farthest right, and lowest meaning that its reactivity is very high.
1. valence electrons and electronegativity
2. Both reactivity and electronegativity decrease down a group.
3. Electronegativity decreases down a group and reactivity increases down a group.
4. The number of valence electrons increases from left to right.
5. Cs
{quizlet: captncrun}
Students are investigating the relationship between pressure and temperature in gases. They have blown up a balloon with carbon dioxide from an air tank and connected the balloon to a pressure gauge. The balloon is then submerged in ice or water baths at various temperatures in order to observe the pressure level after several minutes. What is the flaw in the student’s investigation, and how can the students improve their investigation to correctly determine the relationship?
A.
The volume and density of the air in the balloon can change, therefore they need to use several different balloons at different volumes to account for how density and volume affects pressure.
B.
The volume of the balloon can change, therefore they need to use several different balloons at different volumes to account for how volume affects pressure.
C.
The volume and density of the air in the balloon can change, therefore they need to use a rigid container such as plastic or metal to hold the air.
D.
To keep the volume of the balloon from changing, so they can focus on temperature and pressure they need to use a container that does not expand like a balloon. A constainer made of plastic or metal to hold the air.
Answer:
The volume and density of the air in the balloon can change, therefore they need to use a rigid container such as plastic or metal to hold the air.
Explanation:
what is the ratio of aluminum chloride to lithium sulfate
Durante 50 s un cuerpo viaja a una velocidad de 18.5 m/s, ¿Qué distancia recorrió?
Answer:
Distancia = 925 metros.
Explanation:
Dados los siguientes datos;
Tiempo = 50 segundos
Velocidad = 18.5 m/s
Para encontrar la distancia recorrida;
Matemáticamente, la distancia viene dada por la fórmula;
[tex] Distancia = velocidad * tiempo [/tex]
Sustituyendo en la fórmula, tenemos;
[tex] Distancia = 18.5 * 50 [/tex]
Distancia = 925 m.
Por tanto, el cuerpo recorrió una distancia de 925 metros.
314.5g HBr (MMHBr = 80.91g/mol), is mixed into 4.50L solution. Find Molarity (M) of the
solution.
Answer:
[tex]\boxed {\boxed {\sf M \approx0.864 \ M \ HBr}}[/tex]
Explanation:
The molarity of a solution is the moles per liter. It is found using this formula:
[tex]M=\frac { moles \ of \ solute}{liters \ of \ solution}[/tex]
First we must calculate moles, since we are given grams. To convert from grams to moles, the molar mass is used. This is also given to us, it is 80.91 grams per mole. We can use it as a ratio.
[tex]\frac {80.91 \ g \ HBr}{1 \ mol \ HBr}[/tex]
Multiply by the given number of grams.
[tex]314.5 \ g \ HBr *\frac {80.91 \ g \ HBr}{1 \ mol \ HBr}[/tex]
Flip the fraction so the grams of HBr cancel.
[tex]314.5 \ g \ HBr *\frac {1 \ mol \ HBr}{80.91 \ g \ HBr}[/tex]
[tex]\frac {314.5 \ mol \ HBr}{80.91 }=3.88703497714 \ mol \ HBr[/tex]
Now we know the moles, and can calculate the molarity.
There are 3.88703497714 moles of solute and 4.50 Liters of solution.
[tex]M= \frac {3.88703497714 \ mol }{ 4.50 \ L}[/tex]
[tex]M= 0.863785550476 \ mol/ L[/tex]
The original measurements have 4 and 3 significant figures, so we use the lowest number of 3 for our answer. For the number we calculated, that is the thousandth place.
The 7 in the ten thousandth place tells us to round the 3 to a 4.
[tex]M \approx 0.864 \ mol/ L[/tex]
[tex]M \approx 0.864 \ M \ HBr[/tex]
The molarity of the solution is about 0.864 M HBr.
What kind of reaction is 2H202 → 2H20 + O2?
O A. Decomposition
O B. Single-replacement
C. Double-replacement
O D. Synthesis
Answer:
this reaction is so the answer should be A
Question 7 of 10
The Sun has a diameter of about 865,000 miles.
Suppose you were making a scale model of the
solar system with a scale of 1 inch:1,000 miles.
How wide would the Sun be in your model?
A. 865,000 inches
B. 865 inches
C. 86.5 inches
O D. 8.65 inches
Answer:
you have to decide 865,000 with 1000 and the answer is 865
If a piece of paper with a mass of 1.3 grams is shredded into pieces and then it's weighed again so what would be the mass of the paper shreds?
Option 1: More than 1.3 grams
Option 2: stays the same (1.3 grams)
or
Option 3: Less than 1.3 grams
Answer:
option 2
Explanation:
CH4+2 O2-> CO2 + 2 H2O
You burned 15.0 grams of methane (CH4) in an excess of oxygen and formed 23.8 grams of water. What was your percent yield, rounded to 3 sig-figs?
C= 12.001 g/mol
H= 1.008 g/mol
O= 16g/mol
From the chemical equation it is clear that, one mole or 16 g of methane gas gives 2 moles or 36 g of water. Then, 15 g gives 33.7 g of water. The actual yield is 23.8 g. Then the percent yield is 70.6%.
What is percent yield of a reaction?Percent yield of a reaction is the ratio of its actual yield to the theoretical yield multiplied by 100. The theoretical yield is calculated from the balanced chemical equation of the reaction.
molar mass of methane gas = 16 g/mol
molar mass of water = 18 g/mol
16 g of methane gives 2 moles or 36 g of water. Then 15 g of methane will gives:
(15×36)/16 = 33.7g
The actual yield of water = 23.8 g
then,
percent yield = 23.8 g/33.7 g × 100 = 70.6%.
Therefore, the percent yield of water is 70.6%.
Find more on percent yield:
https://brainly.com/question/30700754
#SPJ2
In the electrolysis of molten lead bromide, what is the product at the anode?
Answer:
it is the second one. Lead
- A compound contains 4.56g. of Pb, 2.3g Cl, and 3.1g 0. What is the percent
composition for each element?
please show work
What does the steepness of the line on the graph represent?
Answer:
The steepness of a hill is called a slope. The same goes for the steepness of a line. The slope is defined as the ratio of the vertical change between two points, the rise, to the horizontal change between the same two points, the run.