A sound wave enters a new medium where sound travels faster. How does this affect the frequency and wavelength of the sound?
OA. The frequency Increases and the wavelength decreases.
OB. The frequency decreases and the wavelength increases.
OC. The frequency stays the same and the wavelength increases.
OD. The frequency stays the same and the wavelength decreases.
ОЕ. Neither the frequency nor the wavelength is affected.

Answer:

2.00 (right on acellus)

Explanation:

doubling the distance between two charges makes F (8.00) quarter, so you would just do 8.00*1/4.

Answer:

B: 50 N/m

Explanation:

Hopes it help.

The spring constant of the spring is 50 N/m. The correct option is B.

When the spring is compressed, it gets compressed up to its elastic limit. When load is removed from the spring, it regains its shape and obtains equilibrium position. The energy stored in this process is called as spring potential energy.

Given a spring has 100 J of EPE when it is stretched 2 m. The energy stored in the spring is given by

SPE = ½ kx²

100 = ½ k (2 m)²

k = 50 N/m

So, spring constant of the spring is 50 N/m.

Thus, the correct option is B.

Learn more about spring potential energy.

https://brainly.com/question/12528339

#SPJ2

Answer:

v = 12.8 m/s

Explanation:

Applying the law of conservation of energy:

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]

where,

m₁ = mass of baseball = 149 kg

m₂ = mass of catcher = 57 kg

u₁ = initial speed of ball = 17.7 m/s

u₂ = initial speed of catcher = 0 m/s

v₁ = v₂ = v = final speed of ball and the final speed of catcher = ?

both are same because ball is in hands of cathcer in the final state.

Therefore,

[tex](149\ kg)(17.7\ m/s)+(57\ kg)(0\ m/s)=(149\ kg)(v)+(57\ kg)(v)\\\\v = \frac{2637.3\ kgm/s}{206\ kg}[/tex]

v = 12.8 m/s

Answer:

True

Explanation:

When two distinct elements are chemically combined—i.e., chemical bonds form between their atoms—the result is called a chemical compound. Most elements on Earth bond with other elements to form chemical compounds, such as sodium (Na) and Chloride (Cl), which combine to form table salt (NaCl).

Hope this helps!!

The answer is A) In the X-direction.

This is the case because, when you are asked about speed on a motion graph, the steeper the line gets, the faster it is going. In the first motion graph "Distance vs Time (X-direction)" the line is getting steeper, so that means it is going faster than the line depicted on the second graph.

Answer:

Atoms are composed of electrons (charge -1), protons (charge +1), and neutrons (no charge). So in a neutral atom the correct answer is "D".

Answer:

395 m/s

Explanation:

By using the first equation of motion,

→ v = 75 + 8(40)

→ v = 75 + 320

→ v = 395

Answer:

A. 1 unit

B. 5 units

C. 8 units

Explanation:

Count the lines from each starting point to each destination.

Answer:

7 volts

Explanation:

Applying,

E = IR+Ir................ Equation 1

Where E = electromotive force of the cell, I = current. R = External resistance, r = internal resistance.

From the question,

Given: I = 2 amperes, R = 3 ohm, r = 0.5 ohm

Substitute these values into equation 1

E = (2×3)+(2×0.5)

E = 6+1

E = 7 volts

Answer:

3.36 Joules

Explanation:

Work done= Force × distance

F=4.2 N

distance= 0.8 m

work done= 4.2 × 0.8

work done= 3.36 Joules

Electrons moving between objects should be place in the region marked X. So, option A.

When a substance is exposed to an electric or magnetic field, it has a characteristic known as charge that makes it experience a force. Neither a positive nor a negative charge exists.

Here,

Normally, electrons are organized into specific shells that maintain a constant distance from the atom's nucleus.

Two electrons can fit inside of the shell that is closest to the nucleus. Up to eight can fit inside the following shell. The number of electron shells in some atoms with numerous protons can reach seven.

A powerful force of attraction exists between the protons and the electrons in the shells that are closest to the nucleus.

In the outermost shells of certain atoms, the protons are sometimes attracted to the electrons with little force.

One can force these electrons out of their orbits. They may switch from one atom to another by applying a force. Electricity is produced by the changing electrons.

Hence,

Electrons moving between objects should be place in the region marked X. So, option A.

To learn more about charge, click:

https://brainly.com/question/14692550

#SPJ5

Answer:

a) Yes, this is kinda the best way to split the teams.

b) Force (or acceleration, these are proportional)

Explanation:

For both questions, we should start with the second Newton's law.

This law can be written as:

F = m*a

force equals mass times acceleration.

a) For the case of the rope, the ideal situation is having almost the same mass in both ends of the rope, in this way, the relation between force and acceleration in each end will be equivalent. (while one could argue that 3 smaller people will actually have a larger mass than the two bigger ones) but yes, this way is a good way to split the teams, so the mass is as even as possible.

b) Acceleration is defined as the rate of change of the velocity.

Again, by the above equation:

F = m*a

We need to have a force if we want to have acceleration.

Then, if an object has constant velocity (if the object is at a full stop, then it has a constant velocity of 0 m/s) we need to apply a force to this object if we want to change its motion.

Similarly, if an object is accelerating, we can apply a force to the object in order to cancel that acceleration (if the net force applied in the object is zero, then the acceleration is zero)

So here we can conclude that a force is what causes an object to change its motion.

Answer:

Please provide more information!

Explanation:

Answer:

1.75

Explanation:

Answer:A 2.2kg block of ice slides across a rough floor. Its initial velocity is 2.5m/s and its final velocity is 0.50m/s. How much of the ice block melted as a result of the work done by friction? (Latent Heat of water is 3.3*10^5J/kg)

Explanation:

The heat produced by friction between a skate and the ice during movement over the surface melts the topmost layer of ice. However, even when you are still, ice is still slick. When you remain still on ice, there is no friction to produce heat, but the ice is still slippery.

Although friction does generate heat, the amount of heat it produces is insufficient to melt ice that is at a very low temperature. But even at low temperatures, ice still creates a slick liquid layer. The formation of a slippery coating even when the item is totally still cannot be explained by frictional heating.

Therefore, A rough floor is traversed by a 2.2 kg lump of ice. It moves at a final speed of 0.50 m/s after starting out at 2.5 m/s. What portion of the ice block melted as a result of the friction's work? (Water has a latent heat of 3.3×105 J/kg.)

Learn more about friction here:

https://brainly.com/question/13000653

#SPJ2

Answer:

20 meters.

Explanation:

In the graph, the x-axis (the horizontal axis) represents the time, while the y-axis (the vertical axis) represents the distance.

If we want to find the distance covered in the first T seconds, you need to find the value T in the horizontal axis.

Once you find it, we draw a vertical line, in the point where this vertical line touches the graph, we now draw a horizontal line. This horizontal line will intersect the y-axis in a given value. That value is the total distance travelled by the time T.

In this case, we want to find the total distance that David ran in the first 4 seconds.

Then we need to find the value 4 seconds in the horizontal axis. Now we perform the above steps, and we will find that the correspondent y-value is 20.

This means that in the first 4 seconds, David ran a distance of 20 meters.

Answer:

Hey!

_________________

Voltage (V) = 0.8V

Current (I) = 200 mA = 200/10^3 = 2/10

Resistance = ?

Resistance = Voltage / Current

Voltage = Current × Resistance

0.8 = 2/10 × Resistance

0.8×10/2 = Resistance

8/2 = Resistance

Resistance = 4 ohm

_________________

Hope it helps...!!!

Explanation:

Answer:

The main difference between these types of motion is that circular motion is a special case of rotational motion, where the distance between the body’s centre of mass and the axis of rotation remains fixed.

Rotational motion is based around the idea of rotation of a body about its center of mass. In rotational motion, the axis of rotation and centre of mass could change whereas in circular motion, the axis of rotation and centre of mass does not change.

Circular motion is a movement of an object along the circumference of a circle or rotation along a circular path and can either have a constant angular rotation rate and constant speed, or it can exist with a changing rate of rotation.

Think of one of those fairground rides where people sit on dummy horses. Now imagine the horses spin around the post that holds them to the base of the ride. Then you have both rotational motion of the horse and circular motion as the horses move around the ride.

Answer:

Explanation:

The funny-looking circle is a hint but iii confirms we are talking about Eartth's magnetic field here :)

i. A is North Pole while H is the magnetic North Pole. D is the equator while C is the magnetic equator.

ii. I, the tilt angle, is about 11 degrees.

iii.  A freely suspended magnet inclines towards HF or AG because it always points towards North/South.

Answer:

Explanation:

A is North Pole, D equator. H is the magnetic North Pole n C the magnetic equator.

I is 10-12 degrees

magnet points to N-S direction as in a compass

Answer:

Explanation:

Quantum mechanics tells us that light can behave simultaneously as a particle or a wave. However, there has never been an experiment able to capture both natures of light at the same time; the closest we have come is seeing either wave or particle, but always at different times.When UV light hits a metal surface, it causes an emission of electrons. Albert Einstein explained this "photoelectric" effect by proposing that light – thought to only be a wave – is also a stream of particles

Why is light considered a wave and a particle?

Light behaves mainly like a wave but it can also be considered to consist of tiny packages of energy called photons. Photons carry a fixed amount of energy but have no mass. They also found that increasing the intensity of light increased the number of electrons ejected, but not their speed

Answer:

b. compensate for changes in the Earth's atmosphere and achieve better resolution.

Explanation:

Answer:

7

Explanation:

Answer:

The type of reaction represented by the model is an;

Exothermic reaction

Explanation:

Exothermic reaction reaction is a reaction that involves the giving off of excess energy as heat and or light by two or more reactants during a chemical reaction due to the higher combined energy of the reactants compared with the product

The analogy are;

The sponge balls are the reacting atoms

The water is the energy which they contain

The water given off is the excess energy which the compound formed by putting together the two soaked sponge balls is unable to hold.

Answer: unit n/c

Explanation: This should be the answer because I just asked my Physics Teachers I hope this is correct

Hope This Helps :)

The electric field between the plates will be 0.1667×10⁵ C.

An electric field is an electric property that is connected with any location in space where a charge exists in any form. The electric force per unit charge is another term for an electric field.

The electric field formula is as follows:

E = F /Q

Where,

The electric field is denoted by the letter E.

F is Electric force

The charge is Q.

Given data;

Q (Charge)= 8.38 × 10¯¹¹ C ,

A (Area between the plates) = 5.68 × 10¯⁴ m²,

ε₀(permeability constant) = 8.85 × 10¯¹² C²/Nm²

[tex]\rm E= \frac{Q}{K \epsilon_0 } \\\\ \rm E= \frac{8.38 \times 10^{-11}}{5.68 \times 10^{-4} \times 8.85 \times 10^{-12} } \\\\ E= 0.1667 \times 10^5 \ N C^{-1}[/tex]

Hence,the electric field between the plates will be 0.1667×10⁵ C.

To learn more about the electric field refer to the link;

https://brainly.com/question/26690770

#SPJ2

Answer:

The Liver, Pancreas and Gall Bladder are involved in the process of delivering the digestive juices for the Intestines

Explanation:

Answer:

They first spend it on necessities.

The correct answer is A. an increase in Earth's average surface temperature.

While all of these are aspects of global warming, option A best summarizes it.

Answer:

A vacuum would have been created. I hope this helps have a great day

Answer:

Cerebrospinal fluid (CSF) is a clear fluid that surrounds the brain and spinal cord.