A student is building a squirrel feeder for a family member. The figure is a model of the feeder.

A rectangular prism with dimensions 2 and three fourths inches by 16 and one half inches by 4 inches.

How much feed can the container hold?

twenty-seven and one-half in3
sixty-eight and three-fourths in3
ninety and three-fourths in3
one hundred eighty-one and one-half in3

Answer:

500 meters.

Step-by-step explanation:

The line of sight distance using the angle of depression 13° is derived to be 2222.71 m to the nearest hundredth meters.

The angle of depression is an angle formed between the horizontal line and the line of sight when an observer looks downwards.

Considering the right triangle formed by the height of the tower and the complementary angle 77°, we shall represent the line of sight distance for the television camera to the base of the stadium with x so that;

cos 77° = 500/x {adjacent/hypotenuse}

note that 90° - 13° = 77°

x = 500/ cos 77° {cross multiplication}

x = 2,222.7057.

Therefore, the line of sight distance for the television camera to the base of the stadium to the nearest hundredth meters is equal to 2,222.71. Using the trigonometric ratio of cosine for the angle 77° which is complementary to the angle of depression 13°

Know more about angle of depression here:https://brainly.com/question/2096694

#SPJ1

Plum Island Lighthouse can light up the harbor 974.44 feet away from its base.

The angle of depression refers to the angle at which an observer is looking down from an object to a point of reference below. If the angle of depression is increased, the distance from the object to the point of reference decreases. When there is a 2-degree angle of depression, the following formula is used to determine the distance between the observer and the point of reference (in this case, the harbor):tan θ = opposite/adjacent

where θ is the angle of depression, opposite is the height of the object, and adjacent is the distance between the object and the point of reference. Tan 2 = 34/x where x is the distance between the lighthouse and the harbor.tan 2 = 0.03492The angle of depression must be converted to radians to use a calculator.θ = 2π/360 = 0.03491 radians

Therefore,34/x = 0.03492x = 34/0.03492 = 974.44 feet.

Learn more about  angle of depression:https://brainly.com/question/27865363

#SPJ11

Answer
Y. Answer:

y=30

Step-by-step explanation:

(3)^2 equals 9, so the first blank is 9.

You then multiply it by the 2, so second blank is 18.

18+15=33

33-3=30=y

Answer:

30

Step-by-step explanation:

first space should be 9 since 3² is 9

second space should be 18 since 2×9=18

final space should be 30 since 18+15 is 33-3=30

The arithmetic mean return is 3.6%, and the standard deviation is 2.14%.

To find the arithmetic mean, we add up the five returns and divide by the number of returns (in this case, 5):

(3% + 6% + 0% + 6% + 3%) / 5 = 3.6%

To find the standard deviation, we first need to find the variance. We can do this by taking each return, subtracting the mean return (3.6%), squaring the result, summing these values, and dividing by the number of returns minus 1 (4 in this case):

((3% - 3.6%)^2 + (6% - 3.6%)^2 + (0% - 3.6%)^2 + (6% - 3.6%)^2 + (3% - 3.6%)^2) / 4 = 0.046

The standard deviation is the square root of the variance:

√0.046 = 0.214 or 2.14%

Therefore, the arithmetic mean return for security y is 3.6%, and the standard deviation (sample) is 2.14%.


To know more about arithmetic mean, refer here:

https://brainly.com/question/13000783#

#SPJ11

Answer:

25 Per Minute

Step-by-step explanation:

25 X 10 = 250

Hope This Helps! ^^

25 per minute

So if she stamped 250 envelopes in 10 minutes, we have to divide 250 by 10, which equals to 25!

Answer:

Approximately 1.05 × 10⁹ pounds of food are consumed by African elephants in one day.

Step-by-step explanation:

Answer:

Step-by-step explanation:

its 7 or 6\

The answer is 1570. To evaluate the expression 547+233×5−142, we need to follow the order of operations, which is PEMDAS (parentheses, exponents, multiplication and division, and addition and subtraction).

There are no parentheses or exponents, so we start with multiplication and division from left to right.

233×5 = 1165

Then, we can simplify the expression to:

547 + 1165 - 142

Next, we add and subtract from left to right:

547 + 1165 = 1712

1712 - 142 = 1570

Find out more about PEMDAS

brainly.com/question/22161640

#SPJ4

The triangle shown in the image above that has sides 8, 24, and 25 is a right triangle because it satisfies the Pythagorean theorem.

A triangle with sides 8, 24, 25 is a right triangle.

This is because the sides satisfy the Pythagorean theorem, which states that in a right triangle, the sum of the squares of the two shorter sides (the legs) is equal to the square of the longest side (the hypotenuse).

In this case, we have:

8² + 24² = 64 + 576 = 640

25² = 625

Since 8² + 24² = 25², the triangle satisfies the Pythagorean theorem, and is therefore a right triangle.

Learn more about right triangle on:

https://brainly.com/question/29869536

#SPJ1

The critical value of z for each hypothesis  test is 2.326

In this question, we are asked to use Excel to find the critical value of z for each hypothesis test. We are given a 2 percent level of significance for a two-tailed test. To find the critical value, we can use the NORM.S.INV function in Excel. The syntax for this function is =NORM.S.INV(probability).

We can enter the probability as 1 - (alpha / 2) for a two-tailed test, where alpha is the level of significance. We can then round the result to three decimal places.

To find the critical value for a 2 percent level of significance, two-tailed test, we can follow these steps:

Step 1: Calculate the value of alpha

Alpha = 2% = 0.02

Step 2: Calculate

1 - (alpha / 2)1 - (alpha / 2)

= 1 - (0.02 / 2)

= 0.99

Step 3: Use the NORM.S.INV function in Excel=NORM.S.INV(0.99)

This gives us a critical value of z = 2.326.

Therefore, the critical value of z for the hypothesis test with a 2 percent level of significance and a two-tailed test is 2.326.

To learn more abouth hypothesis test: https://brainly.com/question/25263462

#SPJ11

When on a stem and leaf plot and it does not show a number on the right side and only on the right side, the number on the right side would be zero.

A stem and leaf plot is a method of organizing numerical data into groups. It is a visual representation of a dataset in which each value is separated into a stem and a leaf. A stem is the left-hand digit(s) of the value, while a leaf is the right-hand digit(s).

The stem and leaf plot contains two columns, one for the stem and the other for the leaf. The stem values are arranged vertically in the left-hand column, and the leaf values are arranged horizontally in the right-hand column. The leaf column should be read from left to right to extract the values.

When a value appears multiple times, its leaves are stacked on top of one another. The stem and leaf plot is an effective method for representing data, particularly when dealing with large datasets.

Hence, If a stem and leaf plot displays a number only on the left side and not on the right side, then the number on the right side would be interpreted as zero.


To know more about stem and leaf plot refer here:

https://brainly.com/question/12857419#

#SPJ11

Answer:

[tex]y = \frac{1}{7} x + 5[/tex]

Step-by-step explanation:

[tex]x - 7y = - 21[/tex]

[tex] - 7y = - x - 21[/tex]

[tex]y = \frac{1}{7} x + 3[/tex]

R carries inversely as the cube S . If R=9 when S=3 ,  S= 4, when R= 243÷64.

Inverse proportionality is a mathematical relationship between two variables, in which an increase in one variable leads to a decrease in the other variable in such a way that their product remains constant. In other words, if the value of one variable is multiplied by a certain factor, the value of the other variable will be divided by the same factor.

Mathematically, two variables x and y are said to be inversely proportional if their relationship can be expressed as:

x * y = k

where k is a constant, and the symbol * denotes multiplication.

For example, the distance travelled by a car is inversely proportional to the time taken to travel that distance, assuming the car maintains a constant speed. If we let d represent the distance travelled and t represent the time taken, then we can express their relationship as:

d * t = k

where k is a constant

If R varies inversely as the cube of S, then we know that:

R ∝ [tex]\frac{1}{S^{3} }[/tex]

We can express this relationship using a proportionality constant k:

R = [tex]\frac{k}{S^{3} }[/tex]

To find the value of k, we can use the given information that R = 9 when S = 3:

9 = [tex]\frac{k}{3^{3} }[/tex]

9 = [tex]\frac{k}{27 }[/tex]

k = 9 * 27

k = 243

Now we can use this value of k to find S when R = [tex]\frac{243}{64}[/tex]:

[tex]\frac{243}{64}=\frac{243}{S^{3} }[/tex]

Simplifying this equation, we get:

S³ = [tex]\frac{243*64}{243}[/tex]

S³ = 64

S = ∛64

S = 4

Therefore, when R = [tex]\frac{243}{64}[/tex], S = 4.

To know more about equation visit:

https://brainly.com/question/29266068

#SPJ1

A) 35. 8 million; thirty-five million eight hundred thousand, or thirty-five million eight hundred thousand dollars ,(b)115. 2 thousand; one hundred and fifteen thousand two hundred.(c) 97.8 million eight hundred thousand; 97.8 million eight hundred thousand. or 978 million.

What significance do numbers have?

We need good numeracy skills as parents to assist our children to develop, as patients to grasp healthcare information, and so as politicians to make sense of numbers and economic news. Selections in life were frequently based upon numerical data; in order to arrive at optimal decisions, we must be good at maths.

How are numbers used in everyday life?

Numbers are utilized in a variety of mathematical operations such as summation, subtraction, multiplication, division, percentage, and so on, that we employ in the everyday companies and exchanges. Quantities are numerical symbols representing integers that may be used for numbering, estimating, and doing other arithmetic operations.

To know more about integers click here

brainly.com/question/10930045

#SPJ4

By answering the presented question, we may conclude that

a) both tanks will have the same amount of water after 20 minutes.

b) difference in time required to thoroughly drain them is: 60 - 44 = 16 minutes.

An equation in mathematics is a statement that states the equality of two expressions. An equation is made up of two sides that are separated by an algebraic equation (=). For example, the argument "2x + 3 = 9" asserts that the phrase "2x + 3" equals the number "9." The purpose of equation solving is to determine the value or values of the variable(s) that will allow the equation to be true. Equations can be simple or complicated, regular or nonlinear, and include one or more elements. The variable x is raised to the second power in the equation "x2 + 2x - 3 = 0." Lines are utilised in many different areas of mathematics, such as algebra, calculus, and geometry.

Part A:

Let's assume that after t minutes, the amount of water remaining in tank A is x gallons, and the amount of water remaining in tank B is also x gallons. We can write equations based on the given information:

Tank A: x = 220 - 5t

Tank B: x = 180 - 3t

To find the time when both tanks have the same amount of water, we can set these two equations equal to each other and solve for t:

220 - 5t = 180 - 3t

40 = 2t

t = 20

Therefore, both tanks will have the same amount of water after 20 minutes.

Part B:

To determine which tank will be completely drained first, we need to find the time it takes for each tank to be completely drained. For tank A, we can set x = 0 in the equation we found in part A:

0 = 220 - 5t

t = 44

So it will take 44 minutes for tank A to be completely drained.

For tank B, we can set x = 0 in the equation given in the problem:

0 = 180 - 3t

t = 60

So it will take 60 minutes for tank B to be completely drained.

Therefore, tank A will be completely drained first. The amount of time it takes for tank A to be completely drained is 44 minutes, and the amount of time it takes for tank B to be completely drained is 60 minutes. The difference in time is:

60 - 44 = 16 minutes.

The difference in time required to thoroughly drain them is: 60 - 44 = 16 minutes.

To know more about equation visit:

brainly.com/question/649785

#SPJ1

According to combinations formula there are 495 possible committees that can be selected from a group of 12 people.

To calculate this, you can use the formula for combinations

nCr = n!/(r!(n-r)!)

where n is the total number of people (12) and r is the number of people on the committee.
Therefore, the possible number of committees that can be selected is;

= {12!}/{4!8!}
= 12*11*10*9/4*3*2*1

= 11880/24
= 495
Therefore, 495 possible committees can be selected from a group of 12 people if a committee of 4 is to be selected.

Know more about combinations here:

https://brainly.com/question/28065038

#SPJ11

The scale factor that takes the segment of length l to the segment of length n is 2.25.

Length is a measurement of the distance between two points, usually expressed in units such as inches, feet, yards, meters, and kilometers. It is used to measure the size of objects, the distance between objects, and the length of a path or route. Length is one of the four fundamental units in the metric system, along with mass, time, and temperature.

This can be determined by a process of successive scaling. The initial segment of length l is first scaled by a factor of 1.5 to give a segment of length m. This segment is then scaled by a factor of 1.5 to give a segment of length n. Multiplying the two scaling factors together, 1.5 x 1.5, gives 2.25, which is the scale factor from the initial segment of length l to the final segment of length n.

To know more about length click-
https://brainly.com/question/25292087
#SPJ1

The scale factor that takes the segment of length l to the segment of length n is 2.25.

Length is a measurement of the distance between two points, usually expressed in units such as inches, feet, yards, meters, and kilometers. It is used to measure the size of objects, the distance between objects, and the length of a path or route. Length is one of the four fundamental units in the metric system, along with mass, time, and temperature.

This can be determined by a process of successive scaling. The initial segment of length l is first scaled by a factor of 1.5 to give a segment of length m. This segment is then scaled by a factor of 1.5 to give a segment of length n. Multiplying the two scaling factors together, 1.5 x 1.5, gives 2.25, which is the scale factor from the initial segment of length l to the final segment of length n.

To calculate the scale factor that takes the segment of length l to the segment of length n, the following formula can be used:
n = (1.5)²×l
Therefore, the scale factor is (1.5)² = 2.25. This means that the segment of length l needs to be scaled by a factor of 2.25 in order to produce the segment of length n.

To know more about length click-
brainly.com/question/25292087
#SPJ1

M∠4 is therefore equivalent to 102.5 degrees as Angles 1 and 3 are the opposing interior angles .

Angles are geometric shapes created by two rays that have a similar terminus, or vertex. Often, the rays are depicted as straight lines with arrows pointing in the appropriate directions. Angles are expressed in degrees, with 360 degrees being a full circle. Angles that are less than 90 degrees are referred to as acute angles, those that are precisely 90 degrees are referred to as right angles, those that are between 90 and 180 degrees are referred to as obtuse angles, and those that are exactly 180 degrees are referred to as straight angles.

given

Angles 1 and 3 are the opposing interior angles in this case, and the exterior angle 4 of a triangle is equal to the total of these angles. We thus have:

m∠4 = m∠1 + m∠3\sm∠4 = 45° + 57.5°

m∠4 = 102.5°

M∠4 is therefore equivalent to 102.5 degrees as Angles 1 and 3 are the opposing interior angles .

To know more about angles visit:

https://brainly.com/question/14569348

#SPJ1

In conclusion, we can say that the IQR is a better measure of variation for these data because it is less affected by outliers and gives a more accurate picture of the spread of the data.

The given box plot illustrates the population of several states (in millions).

The range and the interquartile range (IQR) are both the measures of variation that explain the variation within a set of data, but there are some variations between these two measures.

Let's discuss the differences between these two measures.
Range:
The range is defined as the difference between the highest and lowest values of a data set.

The range is useful for describing the overall spread of the data, which is particularly useful when dealing with very small datasets.

This measure is sensitive to the extreme values, such as outliers.

Because of this, the range of the population of several states can be used to identify the minimum and maximum value for the population of several states.
IQR:
The interquartile range (IQR) is the difference between the 75th and 25th percentiles, also known as the first and third quartiles, in a data set.

The IQR is a better measure of variation than the range because it is less sensitive to extreme values or outliers.

As a result, the IQR is a more robust measure of the spread of the data.

Therefore, it is better to use the IQR for the population of several states since it gives a more accurate picture of the spread of the data.

For similar question on IQR.

https://brainly.com/question/17083142

#SPJ11

The statement that best describes the use of spaces in folders and files names in ArcGIS is "Using spaces in folder and file names in ArcGIS is permitted but strongly discouraged."

ArcGIS is a geographic information system software that is used for creating, editing, analyzing, and sharing spatial data. The software is widely used by GIS professionals, environmental scientists, geographers, and other experts to manage and analyze spatial data.

In ArcGIS, it is possible to use spaces in folder and file names, but it is not recommended. This is because spaces can cause problems when the software tries to access files with spaces in their names. Therefore, it is better to use underscores or hyphens instead of spaces when naming folders and files in ArcGIS. This helps to avoid issues when working with data in ArcGIS.
The statement "Using spaces in folder names in ArcGIS is permitted but strongly discouraged" is the best description of the use of spaces in folder and file names in ArcGIS.

To know more about the "ArcGIS": https://brainly.com/question/29981485

#SPJ11

Answer:

1.   No, the side lengths 3, 5, and 9 cannot make a triangle.

2.  If you are scaling an object by ¹/₃, it makes the object smaller.

     If the real object is 30 inches long, it is 10 inches once it is scaled.

3.  A cube has 6 faces.

     To find the volume, cube the side length:  6³ = 216 in³

Step-by-step explanation:

According to the Triangle Inequality Theorem, the sum of any two sides of a triangle is greater than the length of the third side.

As the sum of the two sides measuring 3 and 5 is 8, and 8 is not greater than 9, the side lengths 3, 5, and 9 cannot make a triangle.

Scaling an object reduces or enlarges its size. When scaling an object:

Therefore, if you are scaling an object by ¹/₃, the object becomes smaller, since ¹/₃ is between zero and 1.

To scale length, simply multiply the length by the scale factor.

Therefore, if a real object is 30 inches long, its length once it is scaled is:

[tex]\implies \sf 30 \times \dfrac{1}{3}=\dfrac{30}{3}=10\;inches[/tex]

A cube is a three-dimensional solid shape with six square faces.

The volume of a cube is the product of its width, length and height.

If the side of a cube measures 6 inches, its volume is:

[tex]\begin{aligned}\implies \sf Volume &=\sf 6 \times 6 \times 6 \\&= \sf 36 \times 6 \\&= \sf 216\;in^3\end{aligned}[/tex]

Answer:

See below, please.

Step-by-step explanation:

Ans 1.

In order to make a triangle, three line segments are needed, and the sum of the lengths of any two sides must be greater than the length of the remaining side. The side lengths 3, 5, and 9 cannot make a triangle because 3 + 5 is less than 9, which violates the triangle inequality.

Ans 2.

Scaling an object by 3 makes the object larger, as each dimension (length, width, and height) is multiplied by 3. If the real object is 30 inches long and is scaled by 3, it will be 90 inches long.

Ans 3.

A cube has 6 faces. To find the volume of a cube when one side measures 6 inches, we use the formula V = s^3, where s is the length of one side. Plugging in s=6, we get V = 6^3 = 216 cubic inches.

Option 3's expression, which is (2 x 60/30) x (24 + 2), is the only one that is not equal to 30.

We have to find the expression that is not equal to 30.

1) (120/20) x (2+3)

We'll start by using BODMAS to solve the brackets. The result is; = (120/20) 5

We therefore have:

= 6 x 5

= 30.

2) (9 x 10)/(4 + 1) + 12

Once more, answer the brackets first using BODMAS.

Hence, (90/5) + 12

Hence, (90/5) + 12

= 18 + 12

= 30.

3) (2 x 60/30) x (24 + 2)

Once more, answer the brackets first using BODMAS.

We'll utilize division instead of multiplication in the first bracket.

(2 x 60/30) x (26)

= 2 x 2 x 26

= 104

4) 2 + (30 - 8/4)

Once more, answer the brackets first using BODMAS.

Division comes first in the second bracket. So,

2 + (30 - 8/4)

= 2 + (30 - 2)

= 2 + 28 = 30

Hence, option 3's expression, which is (2 x 60/30) x (24 + 2), is the only one that does not equal 30.

To know more about BODMAS rule, visit,

https://brainly.com/question/29626868

#SPJ4

The four uppercase letters of the alphabet in block style with rotational symmetry are H, I, O, and X. Rotational symmetry refers to the property of a figure or object that appears identical after being rotated around a central point by a certain angle.

In block style writing, letters are written with straight lines and sharp corners, creating a uniform and geometric appearance. H, I, O, and X are the only uppercase letters that have rotational symmetry and can be written in block style.

H has a rotational symmetry of 180 degrees, meaning it looks the same when rotated 180 degrees around its center point.

I has a rotational symmetry of 180 degrees as well, with the dot above the letter acting as its center point.

O has a rotational symmetry of 360 degrees, meaning it looks the same when rotated any number of degrees around its center point.

Lastly, X has a rotational symmetry of 180 degrees, with the intersection of the two lines acting as its center point.

For more such questions on Rotational symmetry.

https://brainly.com/question/1531736#

#SPJ11

The amount of gas Karen has and the amount Karen needed to put into her boat obtained using basic arithmetic operations are;

Basic arithmetic operations include addition, subtraction, division and multiplication operations.

The amount of gas Karen has can be found using basic arithmetic operations as follows;

On Monday, Karen needed to put 5 gallons 3 quarts of gas into her boat. Since 1 gallon is equal to 4 quarts, this is equivalent to (5 × 4 + 3) = 23 quarts of gas

On Saturday, she needed to put twice as much gas into her boat as she did on Monday. So on Saturday she needed to put (2 × 23) = 46 quarts of gas into her boat.

Since, Karen had 18 gallon jug of gas available and 1 gallon is equal to 4 quarts, this mean she had (18 × 4) = 72 quarts of gas available.

Learn more on basic arithmetic operations here: https://brainly.com/question/31007191

#SPJ1

Answer: 28x+8y+2

Step-by-step explanation:

Remove parentheses: -2(14x-4y-1)

Solution: 28x+8y+2

Answer:

28x+8y+2

Step-by-step explanation:

Answer:

Step-by-step explanation: Since the rectangle sits within the larger circle, let's look at it this way:

Area of Shaded Region = Area of Circle - Area of Rectangle

OR

(X) =( pi * r^2 ) - (rectangle length * rectangle width)

Now we fill in the numbers where we know the numbers:

(X) = (pi * (12 cm)^2) - (3cm * 10cm)

(X) = (pi * 144cm^2) - (30 cm^2)

(X) = 144pi - 30

(X) = 452.39 - 30

(X) = 422.39 cm^2

We can ensure trigonometric functions compute values appropriately by validating the results against known values. In order to ensure that the argument is in a short interval surrounding a place where an approximation is highly accurate, one performs a range reduction prior to computing things like a cos or sin.

By comparing the results to established values, we can make sure trigonometric functions compute values correctly. As an example, if we wanted to validate the cosine of 45 degrees, we could compare the result to the known value of 0.707. If the computed value is within a small margin of error of the known value, then we can assume the trigonometric function is computing values appropriately.

In order to calculate functions like cos or sin, one must first perform a range reduction to make sure the input is inside a narrow range surrounding a point where an approximation is highly accurate. It is typically close to zero.

To learn more about trigonometric functions link is here

brainly.com/question/6904750

#SPJ4

The overall height of the framed picture is 89cm in the total.

The mount is 6 cm across the top and sides and 9 cm across the bottom. As a result, the mount's overall height will be:

45 cm = 6 cm (top) + 30 cm (image height) + 9 cm (bottom).

The mount's entire breadth will be:

6 cm (left) + 40 cm (width of the image) + 6 cm (right) = 52 cm

To get the total height of the framed image, multiply the height of the mount by the height of the picture by twice the width of the frame (since the frame goes around all four sides of the picture).

As a result, the overall height of the framed image will be:

45 centimetre plus 40 cm plus 2(2 cm) Equals 89 cm.

Learn more about area and geometry at

https://brainly.com/question/13487289

#SPJ4

In conclusion, the determinant of M being non-zero only guarantees that the equation has a unique solution, but it does not guarantee that it has a solution for every value of A.
If the determinant of M is not equal to zero, then A can be solved in terms of X or X can be solved in terms of A. This is because the matrix M is invertible when its determinant is non-zero. In other words, the matrix M has a unique inverse.
Here are the statements that are correct:
- Given any X, there is one and only one A which will satisfy the equation. This is because when the determinant of M is non-zero, the matrix M is invertible, and hence the equation can be uniquely solved for A in terms of X or for X in terms of A.
- Some values of A (such as A=0) will allow more than one X to satisfy the equation. This is because the determinant of M being non-zero only guarantees that the equation has a unique solution, but it does not guarantee that it has a solution for every value of A.
- Some values of X will have more than one value of A that satisfy the equation. This is true for any equation that has multiple solutions, regardless of the determinant of M.
- Some values of A will have no values of X that satisfy the equation. This is true for any equation that has no solution, regardless of the determinant of M.
- There is no value of X which satisfies the equation when A=0. This is because when A=0, the equation reduces to 0=0, which is true for any value of X.

for such more questions on  determinant

https://brainly.com/question/28207656

#SPJ11