A student is given an antacid tablet that weighs 5.8400 g. The tablet is crushed and 4.2800 g of the antacid is added to 200. mL of simulated stomach acid. It is allowed to react and then filtered. It is found that 25.00 mL of this partially neutralized stomach acid required 11.6 mL of a NaOH solution to titrate it to a methyl red end point. It takes 29.0 mL of this NaOH solution to neutralize 25.00 mL of the original stomach acid. How much of the original 200. mL of stomach acid (in mL) is neutralized by the 4.2800 g crushed sample of the tablet

Answer:

Do not conduct electricity as solids.

Explanation:

Hello,

In this case, we should remember that salts are formed when an acid and base react in order to yield the salt and water due to the ions exchange during neutralization chemical reactions. For instance, when hydrochloric acid  (acid) reacts with potassium hydroxide (base), sodium chloride (salt) and water are yielded via:

[tex]HCl+NaOH\rightarrow NaCl+H_2O[/tex]

Moreover, it is widely known that salts are formed by electrovalent/ionic bonds which involves electron transfer so the metallic atom becomes positively charged (cation) whereas the non-metallic atom becomes negatively charged (anion) once the electrons are received so it can conduct electricity when dissolved in water yet not when solid since electron transfer is facilitated by the aqueous media, otherwise, ions remain together. Thereby, answer is do not conduct electricity as solids.

Regards.

Answer:

c

Explanation:

Answer:

Osmolarity of solution of KCI = 0.40 osmol

Explanation:

Given:

KCL ⇒ K⁺ + Cl⁻

Find:

Osmolarity of solution of KCI

When M = 0.20 M

Computation:

1 mole of KCL = 2 osmol

1 M of KCl = 2 Osmolarity

So,

Osmolarity of solution of KCI = 2 × 0.20

Osmolarity of solution of KCI = 0.40 osmol

Answer:

The number of oxide ions as the nearest neighbors of  [tex]{\rm{M}}{{\rm{g}}^{{\rm{2 + }}}}[/tex] ions are known to be as six

Explanation:

The regularity of a crystal structure leads to the idea of space lattice.In order to explain this concept, let us consider a crystal of NaCl, It consists of a perfectly regular arrangement of sodium ions and chlorine ions.

If we represent the position of each Na+ in the crystal by a point marked x the result will be a regular three dimensional network of points. This will be the space lattice of Na+ in the crystal NaCl. The symmetry of the combined lattice determined the symmetry of the crystal as a whole.

The space lattice of a crystal may be considered as built up of a three dimensional basic pattern  called unit cell. The unit cell is a repeat unit which generates the whole pattern in three dimensions of the unit cell.

In Solid MgO , the crystal structure which is used to predict the properties of the material, have the same structure as that of NaCl.

The obtain the structure of a face centered cubic FCC unit cell where the ions occupy the corner of the cube and the center of each face of the cube.

The number of oxide ions as the nearest neighbors of  [tex]{\rm{M}}{{\rm{g}}^{{\rm{2 + }}}}[/tex] ions are known to be as six. As a result of that , the coordination number of [tex]{\rm{M}}{{\rm{g}}^{{\rm{2 + }}}}[/tex] ions is six.

Answer:

The concentration takes 25.360 seconds to decrease to one-ninth of its initial value.

Explanation:

The decomposition of the compound has an exponential behavior and process can be represented by this linear first-order differential equation:

[tex]\frac{dc}{dt} = -\frac{1}{\tau}\cdot c(t)[/tex]

Where:

[tex]\tau[/tex] - Time constant, measured in seconds.

[tex]c(t)[/tex] - Concentration of the compound as a function of time.

The solution of the differential equation is:

[tex]c(t) = c_{o} \cdot e^{-\frac{t}{\tau} }[/tex]

Where [tex]c_{o}[/tex] is the initial concentration of the compound.

The time is now cleared in the result obtained previously:

[tex]\ln \frac{c(t)}{c_{o}} = -\frac{t}{\tau}[/tex]

[tex]t = -\tau \cdot \ln \frac{c(t)}{c_{o}}[/tex]

Time constant as a function of half-life is:

[tex]\tau = \frac{t_{1/2}}{\ln 2}[/tex]

Where [tex]t_{1/2}[/tex] is the half-life of the composite decomposition, measured in seconds.

If [tex]t_{1/2} = 8\,s[/tex], then:

[tex]\tau = \frac{8\,s}{\ln 2}[/tex]

[tex]\tau \approx 11.542\,s[/tex]

And lastly, given that [tex]\frac{c(t)}{c_{o}} = \frac{1}{9}[/tex] and [tex]\tau \approx 11.542\,s[/tex], the time taken for the concentration to decrease to one-ninth of its initial value is:

[tex]t = -(11.542\,s)\cdot \ln\frac{1}{9}[/tex]

[tex]t \approx 25.360\,s[/tex]

The concentration takes 25.360 seconds to decrease to one-ninth of its initial value.

Answer:

Mass PbCl₂ = 50.24g

Mass AgCl = 14.84g

Explanation:

The addition of Cl⁻ ions from the KCl solution results in the precipitation of AgCl and PbCl₂ as follows:

Ag⁺ + Cl⁻ → AgCl(s)

Pb²⁺ + 2Cl⁻ → PbCl₂(s)

If we define X as mass of PbCl₂, moles of Cl⁻ from PbCl₂ are:

Xg × (1mol PbCl₂/ 278.1g) × (2moles Cl⁻ / 1 mole PbCl₂) = 0.00719X moles of Cl⁻ from PbCl₂

And mass of AgCl will be 65.08g-X. Moles of Cl⁻ from AgCl is:

(65.08g-Xg) × (1mol AgCl/ 143.32g) × (1mole Cl⁻ / 1 mole AgCl) = 0.45409 - 0.00698X moles of Cl⁻ from AgCl

Moles of Cl⁻ that were added in the KCl solution are:

0.242L × (1.92mol KCl / L) × (1mole Cl⁻ / 1 mole KCl) = 0.46464 moles of Cl⁻ added.

Moles Cl⁻(AgCl) + Moles Cl⁻(PbCl₂) = Moles Cl⁻(added)

0.45409 - 0.00698X moles + (0.00719X moles) = 0.46464 moles

0.45409 + 0.00021X = 0.46464

0.00021X = 0.01055

X = 0.01055 / 0.00021

X = 50.24g

As X = Mass PbCl₂

And mass of AgCl = 65.08 - 50.24

The masses of the compounds in the precipitate can be found my knowing

the number of moles of chloride ion contributed by each compound.

Reasons:

The given parameter are;

Volume of KCl solution added = 0.242 L

Concentration of KCl solution = 1.92 M KCl

The ions in the solution to which KCl is added = Ag⁺ and Pb²⁺ ions

Precipitates formed = AgCl and PbCl₂

The mass of the precipitate = 65.08 g

Required:

The mass of PbCl₂ and AgCl in the precipitate

Solution;

Number of moles of chloride ions in a mole of PbCl₂ = 2 moles

Number of moles of chloride ions in a mole of AgCl = 1 mole

Let X represent the mass of PbCl₂ in the precipitate, we have;

The mass of AgCl in the precipitate = 65.08 g - X

[tex]\mathrm{Number \ of \ moles \ of \ PbCl_2} = \dfrac{X \, g}{278.1 \, g} =\mathbf{ \dfrac{X }{278.1}}[/tex]

Number of moles of chloride ions from PbCl₂ is therefore;

[tex]\mathrm{Number \ of \ moles \ of \ Cl^- from \ PbCl_2} =\mathbf{ 2 \times \dfrac{X }{278.1} \ moles \ of \ Cl^-}[/tex]

[tex]\mathrm{Number \ of \ moles \ of \ AgCl \ in \ the \ precipitate} = \dfrac{65.08 -X }{143.32}[/tex]

[tex]\mathrm{Number \ of \ moles \ of \ Cl^- from \ AgCl} = \mathbf{ \dfrac{65.08 -X }{143.32}} \ moles \ of \ Cl^-[/tex]

The number of moles of chloride ions from one mole of KCl = 1 mole

Number of moles of chloride ions from 0.242 L of 1.92 M KCl is therefore;

0.242 L × 1.92 moles/L = 0.46464 moles

Number of moles of chloride ions from KCl = 0.46464 moles

[tex]0.46464 \ moles \ from \ KCl = \overbrace{ \dfrac{ 2 \times X }{278.1} + \dfrac{65.08 -X }{143.32}} \ moles \ in \ PbCl_2 \ and \ AgCl[/tex]

Which gives;

[tex]\displaystyle \frac{192}{896089} \cdot X + \frac{1627}{3583} = \frac{1452}{3125}[/tex]

Therefore;

[tex]\displaystyle X = \frac{\frac{1452}{3125} - \frac{1627}{3583} }{ \frac{192}{896089} } = \frac{105864850549}{2149800000} \approx \mathbf{ 49.24}[/tex]

The mass of PbCl₂ in the precipitate, X ≈ 49.24 g

The mass of AgCl in the precipitate = 65.08 g - 49.24 g ≈ 15.84 g

Learn more here:

https://brainly.com/question/13652772

Radiologists are medical doctors that treat injuries using medical imaging (radiology)

Answer:

a person who uses X-rays or other high-energy radiation, especially a doctor specializing in radiology.

Explanation:

Answer:

Explanation:

a ) Benzoic acid is formed . In any alkyl benzene derivative , potassium permanganate reacts to form carboxylic acid . It oxidises side chains to carboxylic acid .  

C₆H₅CH₃ + 0 = C₆H₅COOH + H₂O

O is provided by KMnO₄

b ) In this reaction isophthalic acid is formed .

C₆H₄(CH₃)₂ +O = C₆H₄(COOH)₂

c)

4-Propyl-3-t-butyltoluene

In this oxidation , three side chains of ring  are 1 ) 1-methyl 2 ) 3- butyl 3 ) 4 propyl .

The methyl and 4 - propyl groups are oxidised to di- carboxylic acid and 3 butyl group remains intact ( unoxidised )

Answer:

0.1736 L or 173.6 ml

Explanation:

Number of moles of lead II nitrate is obtained by;

Number of moles = concentration × volume of solution

Concentration= 0.112 M

Volume of solution= 310 ml

n= 0.112 × 310/1000

n= 0.03472 moles

From the reaction equation;

2 moles of potassium iodide reacted with 1 mole of lead II nitrate

x moles of potassium iodide will react with 0.03472 moles of lead II nitrate

x= 2 × 0.03472 moles= 0.06944 moles of potassium iodide

Volume of potassium iodide solution = number of moles/ concentration = 0.06944/ 0.4

Volume of potassium iodide solution= 0.1736 L or 173.6 ml

Answer:

too low

Explanation:

If our aim is to recover the naphthalene and measure its mass after separation, then we must not allow any vapour to escape.

Naphthalene is a sublime substance, it can be separated by sublimation. It changes directly from solid to gas. This vapour must be kept securely so that none of it escapes. If part of the naphthalene vapour happens to escape accidentally, then the measured mass of naphthalene will be too low compared to the mass of naphthalene originally present in the mixture.

Answer:

Isomers are molecules that have the same molecular method, however have a unique association of the atoms in space. That excludes any extraordinary preparations which can be sincerely because of the molecule rotating as an entire, or rotating about precise bonds.

Answer:

Aromatic Hydrocarbons

Explanation:

Aromatic (Pleasant Odour) Hydrocarbons are those having pleasant odours.

Answer:

substituted hydrocarbons

Explanation:

i think

Answer:

(1) Before the addition of any HBr, the pH is 12.02

(2) After adding 12.0 mL of HBr, the pH is 10.86

(3) At the titration midpoint, the pH is 10.73

(4) At the equivalence point, the pH is 5.79

(5) After adding 45.1 mL of HBr, the pH is 1.18

Explanation:

First of all, we have a weak base:

(CH₃)₂NH  + H₂O  ⇄  (CH₃)₂NH₂⁺  +  OH⁻            Kb = 5.4×10⁻⁴

0.289 - x                             x                x

Kb = x² / 0.289-x

Kb . 0.289 - Kbx - x²

1.56×10⁻⁴ - 5.4×10⁻⁴x - x²

After the quadratic equation is solved x = 0.01222 → [OH⁻]

- log  [OH⁻] = pOH → 1.91

pH = 12.02   (14 - pOH)

We determine the mmoles of H⁺, we add:

0.286 M . 12 mL = 3.432 mmol

We determine the mmoles of base⁻, we have

27.9 mL . 0.289 M = 8.0631 mmol

When the base, react to the protons, we have the protonated base plus water (neutralization reaction)

(CH₃)₂NH     +      H₃O⁺        ⇄  (CH₃)₂NH₂⁺  +  H₂O

8.0631 mm       3.432 mm                 -

4.6311 mm                                  3.432 mm

We substract to the dimethylamine mmoles, the protons which are the same amount of protonated base.

[(CH₃)₂NH] → 4.6311 mm / Total volume (27.9 mL + 12 mL) = 0.116 M

[(CH₃)₂NH₂⁺] → 3.432 mm / 39.9 mL = 0.0860 M

We have just made a buffer.

pH = pKa + log (CH₃)₂NH  / (CH₃)₂NH₂⁺

pH = 10.73 + log (0.116/0.0860) = 10.86

mmoles of base = mmoles of acid

Let's find out the volume

0.289 M . 27.9 mL = 0.286 M . volume

volume in Eq. point = 28.2 mL

(CH₃)₂NH     +      H₃O⁺        ⇄  (CH₃)₂NH₂⁺  +  H₂O

8.0631 mm       8.0631mm               -

                                                8.0631 mm

We do not have base and protons, we only have the conjugate acid

We calculate the new concentration:

mmoles of conjugated acid / Total volume (initial + eq. point)

[(CH₃)₂NH₂⁺] = 8.0631 mm /(27.9 mL + 28.2 mL)  = 0.144 M

(CH₃)₂NH₂⁺   +  H₂O   ⇄   (CH₃)₂NH  +  H₃O⁻       Ka = 1.85×10⁻¹¹

 0.144 - x                                  x               x

[H₃O⁺] = √ (Ka . 0.144) →  1.63×10⁻⁶ M  

pH = - log [H₃O⁺] = 5.79

This is the point where we add, the half of acid. (14.1 mL)

This is still a buffer area.

mmoles of H₃O⁺ = 4.0326 mmol (0.286M . 14.1mL)

mmoles of base = 8.0631 mmol - 4.0326 mmol

[(CH₃)₂NH] = 4.0305 mm / (27.9 mL + 14.1 mL) = 0.096 M

[(CH₃)₂NH₂⁺] = 4.0326 mm (27.9 mL + 14.1 mL) = 0.096 M

pH = pKa + log (0.096M / 0.096 M)

pH = 10.73 + log 1 =  10.73

Both concentrations are the same, so pH = pKa. This is the  maximum buffering capacity.

mmoles of acid = 45.1 mL . 0.286 M = 12.8986 mmol

mmoles of base = 8.0631 mmoles

This is an excess of H⁺, so, the new [H⁺] = 12.8986 - 8.0631 / Total vol.

(CH₃)₂NH     +      H₃O⁺        ⇄  (CH₃)₂NH₂⁺  +  H₂O

8.0631 mm     12.8986 mm             -

       -               4.8355 mm                        

[H₃O⁺] = 4.8355 mm / (27.9 ml + 45.1 ml)

[H₃O⁺] = 4.8355 mm / 73 mL → 0.0662 M

- log [H₃O⁺] = pH

- log 0.0662 = 1.18 → pH

Answer:

F

Explanation:

Halogens may interact with the benzene ring via inductive or resonance effects. Halogens deactivate the benzene ring by inductive effect rather than by resonance effects.

The lone pairs of electrons present on the halogen atoms may be donated to the ring by resonance, but an opposite effect, the inductive pull (-I inductive effect) of the halogen atoms on electrons away from the benzene ring due to the high electro negativity of the halogens leads to a deactivation of the ring towards electrophilic substitution.

Hence inductive electron withdrawal by the halogen atom predominates over electron donation by resonance effect and the benzene ring g is deactivated towards electrophilic substitution at the ortho and para positions.

Answer:

Approximately 100 °C.

Explanation:

Hello,

In this case, since the entropy of vaporization is computed in terms of the heat of vaporization and the temperature as:

[tex]\Delta S_{vap}=\frac{\Delta H_{vap}}{T}[/tex]

We can solve for the temperature as follows:

[tex]T=\frac{\Delta H_{vap}}{\Delta S_{vap}}[/tex]

Thus, with the proper units, we obtain:

[tex]T=\frac{55500J/mol}{148J/(mol*K)} =375K\\\\T=102 \°C[/tex]

Hence, answer is approximately 100 °C.

Best regards.

Answer:

37%

Explanation:

From the question, the equation goes does.

C2H6+ (1-x)+a(O2+3.76N2)=bC02 + cH2O + axO2 + 3.76dN2.

Mair=Mair/Rin

( MN)O2 + (MN)N2÷ (MN)O2 + (MN)N2 +(MN)C2H6.

33 . 3.25(1-x) + 28 × 13.16(1-x) ÷ 33 × 3.25(1-x) + 28 × 13.16(1-x). + 30.1

= 176/176+8

X= 0.37

0.37 × 100

X= 37%

Answer:

1. REDOX

2. None of the above

3. Precipitation

4. Preicipitation

5. Acid base neutralization

Explanation:

Reactions where a solid is formed, are named as precipitation. This solid is called precipitated.

Option 4 and 3.

3) CaO (s) + CO₂ (g) →  CaCO₃(s)

4) KOH (aq)  + AgCl (aq)  →  KCl (aq)  + AgOH(s)

Reactions where water is produced, and you have an acid and a base as reactants, are named as neutralization. You called them acid-base because, the products.

5) Ba(OH)₂ (aq)  +  2HNO₂(aq)  →  Ba(NO₂)₂ (aq) + 2H₂O(l)

Redox, are the reactions where one of the reactans can be oxidized and reduced, when a mole of electrons is released, or gained.

1) Ba(ClO₃)₂ (s)  → BaCl₂ (s) +  3O₂(g)

Oxygen from the chlorate is oxidized (increases the oxidation state from -2 to 0) and the chlorine is reduced (decreases the oxidation state from +5 to -1).

2.  2NaCl(aq)  +  K₂S(aq)  Na₂S (aq)  + 2KCl (aq)

None of the above

Answer:

4NH₃(g)  + 5O₂(g)  →  4NO(g)  +  6H₂O

2NO(g) + O₂(g) → 2 NO₂

Explanation:

First of all, we need to consider the reaction for production of ammonia. In this reaction we have as reactants, nitrogen and hydroge.

3H₂ (g) +  N₂(g)  →  2NH₃ (g)

Afterwards, ammonia reacts to oxygen, to produce NO and H₂O

The equation for the process will be:

4NH₃(g)  + 5O₂(g)  →  4NO(g)  +  6H₂O

Then, we take the nitric oxide to make it react, to produce NO₂, in order to produce nitric acid, for the final reaction:

2NO(g) + O₂(g) → 2 NO₂

3NO₂(g) + H₂O(g) → 2 HNO₃ (g) + NO(g)

Answer:

Al(NO₃)₃: Acidic.

C₂H₅NH₃NO₃: Acidic.

NaClO: Basic

RbI: pH-neutral

CH₃NH₃CN: Solution basic

Explanation:

The general rules to determine if a solution is acidic, basic or neutral are:

For the salts:

Al(NO₃)₃. The repective acid is HNO₃ (Strong acid) and the base is Al(OH)₃ (Weak base). As the salt comes from strong acid and weak base. SOLUTION ACIDIC

C₂H₅NH₃NO₃. The acid is HNO₃ (Strong acid) and the base C₂H₅NH₃OH (Weak base). SOLUTION ACIDIC.

NaClO. Tha acid is HClO (weak acid), and the base NaOH (Strong base). SOLUTION BASIC.

RbI: The acid is HI (Strong acid) and the base RbOH (Strong base). pH-NEUTRAL

CH₃NH₃CN. The acid is HCN (weak acid; pKb = 4.79) and  the base CH₃NH₃OH (weak base; pKa = 10.64). Both weak acid and base will produce each hydrolisis. The lower pK will predominate. That is the weak acid. SOLUTION BASIC

Solution of Al(NO₃)₃ and C₂H₅NH₃NO₃ salts is acidic, NaClO is basic and of RbI & CH₃NH₃cyanide is neutral in nature.

pH of any solution tells about the acidity or basicity of the solution, pH of any solution ranges from 0 to 14 and from acidity to basicity.

Hence, appropriate differentiation was done above.

To know more acidity or basicity, visit the below link:

https://brainly.com/question/172153

Answer:

Coordinate or r = (7,9).

Explanation:

Data obtained from the question include the following:

Mid point = (8,7)

Coordinate of S = (9,5)

Coordinate of r =...?

We shall determine the coordinate of r as follow:

Let the coordinate of r be (x2, y2)

Mid point = (x1 + x2)/2 , (y1 + y2)/2

Mid point = (8,7)

Coordinate of S = (9,5)

x1 = 9

y1 = 5

x2 =?

y2 =?

The value of x2 can be obtained as follow:

8 = (x1 + x2)/2

8 = (9 + x2)/2

Cross multiply

9 + x2 = 2 × 8

9 + x2 = 16

Collect like terms

x2 = 16 – 9

x2 = 7

The value of y2 can be obtained as follow:

5 = (y1 + y2)/2

7 = (5 + y2)/2

Cross multiply

5 + y2 = 2 × 7

5 + y2 = 14

Collect like terms

y2 = 14 – 5

y2 = 9

Coordinate of r = (x2, y2)

Coordinate or r = (7,9)

Answer:

See explanation

Explanation:

A Lewis structure is also called a dot electron structure. A Lewis structure represents all the valence electrons on atoms in a molecule as dots. Lewis structures can be used to represent molecules in which the central atom obeys the octet rule as well as molecules whose central atom does not obey the octet rule.

Sometimes, one Lewis structure does not suffice in explaining the observed properties of a given chemical specie. In this case, we evoke the idea that the actual structure of the chemical specie lies somewhere between a limited number of bonding extremes called resonance or canonical structures.

The canonical structure of the carbonate ion as well as the lewis structure of phosphine is shown in the image attached to this answer.

Answer:

PhCH2CH2COOH

Explanation:

This is a reaction of PhCH2CH2Br with KCN in the presence of H3O^+. The reaction first leads to the formation of PhCH2CH2CN.

We must recall that part of the properties of nitriles is that they can be converted to carboxylic acids in the presence of H3O^+. This is a common synthetic route for carboxylic acids.

Therefore, when the PhCH2CH2CN is now further reacted with H3O^+, the carboxylic acid PhCH2CH2COOH is formed as the major organic product of the reaction, hence the answer given above.

Answer:

The Nuclear magnetic resonance is the process this technique does not use radiation.

The  ms is an sensitive technology can be a massive number and small sample of the blood.

Explanation:

The Nuclear magnetic resonance we look at the both side of that coin.

The technique provides that fatty acid composition and various including amino acids.

These are contain the complementary these biomarkers, that are suitable for all kinds of studies. there are many types of research:-

(1) A powerful tool metabolic (2) A versatile tool research (3) Quick analysis (4) Low cost analysis.

The MS is an extremely sensitive technology using a very small number of the blood.

(1) Powerful techniques (2) Highly method (3) Large number of metabolites (4)Small sample volume

MS can be fine mapping metabolic pathways to sign analytical strategy.

Answer:

(a) [tex]Ksp=4.50x10^{-7}[/tex]

(b) [tex]Ksp=1.55x10^{-6}[/tex]

(c) [tex]Ksp=2.27x10^{-12}[/tex]

(d) [tex]Ksp=1.05x10^{-22}[/tex]

Explanation:

Hello,

In this case, given the solubility of each salt, we can compute their molar solubilities by using the molar masses. Afterwards, by using the mole ratio between ions, we can compute the concentration of each dissolved and therefore the solubility product:

(a) [tex]BaSeO_4(s)\rightleftharpoons Ba^{2+}(aq)+SeO_4^{2-}(aq)[/tex]

[tex]Molar\ solubility=\frac{0.0188g}{100mL} *\frac{1mol}{280.3g}*\frac{1000mL}{1L}=6.7x10^{-4}\frac{mol}{L}[/tex]

In such a way, as barium and selenate ions are in 1:1 molar ratio, they have the same concentration, for which the solubility product turns out:

[tex]Ksp=[Ba^{2+}][SeO_4^{2-}]=(6.7x10^{-4}\frac{mol}{L} )^2\\\\Ksp=4.50x10^{-7}[/tex]

(B) [tex]Ba(BrO_3)_2(s)\rightleftharpoons Ba^{2+}(aq)+2BrO_3^{-}(aq)[/tex]

[tex]Molar\ solubility=\frac{0.30g}{100mL} *\frac{1mol}{411.15g}*\frac{1000mL}{1L}=7.30x10^{-3}\frac{mol}{L}[/tex]

In such a way, as barium and bromate ions are in 1:2 molar ratio, bromate ions have twice the concentration of barium ions, for which the solubility product turns out:

[tex]Ksp=[Ba^{2+}][BrO_3^-]^2=(7.30x10^{-3}\frac{mol}{L})(3.65x10^{-3}\frac{mol}{L})^2\\\\Ksp=1.55x10^{-6}[/tex]

(C) [tex]NH_4MgAsO_4(s)\rightleftharpoons NH_4^+(aq)+Mg^{2+}(aq)+AsO_4^{3-}(aq)[/tex]

[tex]Molar\ solubility=\frac{0.038g}{100mL} *\frac{1mol}{289.35g}*\frac{1000mL}{1L}=1.31x10^{-4}\frac{mol}{L}[/tex]

In such a way, as ammonium, magnesium and arsenate ions are in 1:1:1 molar ratio, they have the same concentrations, for which the solubility product turns out:

[tex]Ksp=[NH_4^+][Mg^{2+}][AsO_4^{3-}]^2=(1.31x10^{-4}\frac{mol}{L})^3\\\\Ksp=2.27x10^{-12}[/tex]

(D) [tex]La_2(MoOs)_3(s)\rightleftharpoons 2La^{3+}(aq)+3MoOs^{2-}(aq)[/tex]

[tex]Molar\ solubility=\frac{0.00179g}{100mL} *\frac{1mol}{1136.38g}*\frac{1000mL}{1L}=1.58x10^{-5}\frac{mol}{L}[/tex]

In such a way, as the involved ions are in 2:3 molar ratio, La ion is twice the molar solubility and MoOs ion is three times it, for which the solubility product turns out:

[tex]Ksp=[La^{3+}]^2[MoOs^{-2}]^3=(2*1.58x10^{-5}\frac{mol}{L})^2(3*1.58x10^{-5}\frac{mol}{L})^3\\\\Ksp=1.05x10^{-22}[/tex]

Best regards.

Answer:

6

Explanation:

Alkanes undergo substitution reaction so the number of replacement reaction hydrogen is 6

Answer:

The correct option is d

Explanation:

Nuclide is synonymous with groups of electrons or protons, that is, a nuclide is the grouping of nucleons.

Answer:

A

Explanation:

The number of protons indicates the element so we know it's potassium. To get the number of neutrons you subtract the number of protons (19) from the mass number which for potassium is 39.

39-19=20 neutrons

Because you have 18 neutrons then yours would be an isotope.

Answer: A. Isotope of potassium(K)

Explanation: Founders Educere answer.

Answer:

0.373 M

Explanation:

The balanced equation for the reaction is given below:

HC2H3O2 + NaOH —> NaC2H3O2 + H2O

From the balanced equation above, the following were obtained:

Mole ratio of the acid, HC2H3O2 (nA) = 1

Mole ratio of the base, NaOH (nB) = 1

Next, we shall write out the data obtained from the question. This include:

Volume of base, NaOH (Vb) = 32.17 mL

Molarity of base, NaOH (Mb) = 0.116 M

Volume of acid, HC2H3O2 (Va) = 10 mL

Molarity of acid, HC2H3O2 (Ma) =..?

The molarity of the acid solution can be obtained as follow:

MaVa/MbVb = nA/nB

Ma x 10 / 0.116 x 32.17 = 1

Cross multiply

Ma x 10 = 0.116 x 32.17

Divide both side by 10

Ma = (0.116 x 32.17) /10

Ma = 0.373 M

Therefore, the concentration of the acetic acid is 0.373 M.

The given question is incomplete. The complete question is given here :

The equilibrium constant for the reaction is [tex]1.1\times 10^6[/tex] M.

[tex]HONO(aq)+CN^- (aq)\rightleftharpoons HCN(aq)+ONO^-(aq)[/tex]

This value indicates that

A. [tex]CN^-[/tex] is a stronger base than [tex]ONO^-[/tex]

B. HCN is a stronger acid than HONO

C. The conjugate base of HONO is [tex]ONO^-[/tex]

D. The conjugate acid of CN- is HCN

Answer: A. [tex]CN^-[/tex] is a stronger base than [tex]ONO^-[/tex]

Explanation:

Equilibrium constant is the ratio of product of the concentration of products to the product of concentration of reactants.

When [tex]K_{p}>1[/tex]; the reaction is product favoured.

When [tex]K_{p};<1[/tex] ; the reaction is reactant favored.

[tex]When K_{p}=1[/tex]; the reaction is in equilibrium.

As, [tex]K_p>>1[/tex], the reaction will be product favoured and as it is a acid base reaction where [tex]HONO[/tex] acts as acid by donating [tex]H^+[/tex] ions and [tex]CN^-[/tex] acts as base by accepting [tex]H^+[/tex]

Thus [tex]HONO[/tex] is a strong acid thus [tex]ONO^-[/tex] will be a weak conjugate base and [tex]CN^-[/tex] is a strong base which has weak [tex]HCN[/tex] conjugate acid.

Thus the high value of K indicates that [tex]CN^-[/tex] is a stronger base than [tex]ONO^-[/tex]