Answer:
The concentration is 0.2 M HCI / 15mL 62g
Explanation:
----->
Alia needs to order the following isotopes by atomic number. Use what you know about atomic number and
isotopes to drag and drop the tiles in order of increasing atomic number from lowest to highest.
Silver-109
Cadmium-106
Rhodium-122
Indium-110
Palladium-109
Answer:
Rhodium-122 < Palladium-109 < Silver-109 < Cadmium-106 < Indium-110
Explanation:
Atomic number - Number of protons.
The number displayed at the end of the element in this question represents the mass number (Number of protons + Number of neutrons).
The atomic number of the isotopes are given below;
Silver-109 --> 47
Cadmium-106 --> 48
Rhodium-122 --> 45
Indium-110 --> 49
Palladium-109 --> 46
Arranging in order of increasing atomic number from lowest to highest;
Rhodium-122 < Palladium-109 < Silver-109 < Cadmium-106 < Indium-110
How many grams of magnesium oxide do you have if you have 5.31 x 1024 formula units of magnesium oxide (MgO)?
Answer: cashier
Explanation: because
In the atmosphere, it is more common to find two oxygen molecules joined together than to find a single atom of oxygen. Why? What would that molecule look like? What would this molecule be called?
Answer:
See explanation
Explanation:
Oxygen has six electrons in its outermost shell. This means that its octet can be completed when it shares two electrons with another oxygen atom.
In a covalent bond, each bonding atom contributes one electron to the bond. This means that four electrons are shared between two oxygen atoms. Each atom contributes a total of two electrons which are shared. This molecule of oxygen satisfies the octet rule rather than a single atom of oxygen.
An image of the oxygen molecule is attached to this answer.
This system of two oxygen atoms joined together in a covalent bond is called an oxygen molecule(O2).
Chemical equation=CH4 + O2 = CO2 + H2O.
i. identify the products of the chemical reaction.
ii. explain why these are the products based on trends in the periodic table (the number of
valence electrons, electronegativity, etc.).
iii. identify the types of bonds in the reactants and products.
iv. identify the number of each type of bond in the reactants and products.
v. identify the type of reaction
Answer:
1.The substance(s) to the left of the arrow in a chemical equation are called reactants. A reactant is a substance that is present at the start of a chemical reaction. The substance(s) to the right of the arrow are called products . A product is a substance that is present at the end of a chemical reaction.The combustion of methane or octane is exothermic; it releases energy. CH4 + 2 O2 → CO2 + 2 H2O + energy The energies of the products are lower than the energiies of the reactants.
Explanation:
Please help this is due soon and I’ll mark you brainiest if you can help
Answer:
I think it's either A or D I'm not sure hope that I helped you.
CaC2 + 2H2O ⟶ C2H2 + Ca(OH)2
If 32.0g CaC2 are used in this reaction, how many moles of calcium hydroxide are produced?
0.499 mol
Explanation: M(CaC2) = 64.1 g/mol, n= m/M = 32.0 g/ 64.1 g/ mol= 0.499 mol
Amount of Calcium hydroxide Is same
how many grams of sulphur contain 3.0×1021 atoms
Answer:
There are 0.16 g of sulphur in 3.0 × 10²¹ atoms.
Explanation:
One mole of a substance contains 6.02 × 10²³ particles
One mole of sulphur atom contains 6.02 × 10²³ atoms
Number of moles of sulphur present in 3.0 × 10²¹ atoms = 3.0 ×10²¹/6.02 10²³
Number of moles of sulphur atom = 0.00498 moles of sulphur atom
The mole of a substance is related to its mass by a quantity known as molar mass which is defined as the mass of one mole of that substance.
Molar mass of sulphur atom = 32 grams per mole (g/mol)
Mass of 0.00498 moles of sulphur atom = 0.00498 moles × 32 g/mol
Mass of sulphur = 0.16 g
Therefore, there are 0.16 g of sulphur in 3.0 × 10²¹ atoms.
500mL of air are trapped in a tube over mercury at 25°C. It is found that, after six
days, the air has expanded so that 32mL have escaped the tube. What total
temperature change occurred over this period if the pressure remained constant?
Answer:
The new temperature is 19.072 K.
Explanation:
Charles's Law consists of the relationship that exists between the volume and the temperature of a certain quantity of ideal gas, which is maintained at a constant pressure. This law says that as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases because the temperature is directly related to the energy of the movement of the gas molecules.
In summary, Charles's law is a law that says that when the amount of gas and pressure are kept constant, the quotient that exists between the volume and the temperature will always have the same value:
[tex]\frac{V}{T}=k[/tex]
Assuming that a certain volume of gas V1 that is at a temperature T1 at the beginning of the experiment varies up to a volume of gas V2, then the temperature will change to T2, and it will be true:
[tex]\frac{V1}{T1}=\frac{V2}{T2}[/tex]
In this case:
V1= 500 mLT1= 25 C= 298 KV2= 32 mLT2= ?Replacing:
[tex]\frac{500 mL}{298 K}=\frac{32 mL}{T2}[/tex]
Solving:
[tex]T2=32 mL*\frac{298 K}{500 mL}[/tex]
T2= 19.072 K
The new temperature is 19.072 K.
what is wind in more than 15 words?
Answer:
Wind is Air in a natural motion, as that moving horizontally at any velocity along the earth's surface.
How are cations formed? A. when one or more electrons of an atom disintegrate B. when an atom gains one or more electrons from other atoms C. when an atom shares one or more electrons with another atom D. when an atom loses one or more electrons
Answer:
D
Explanation:
When an atom loses an electron the number of electrons exceeds the number of protons. This means that the negative charge induced by the electrons exceeds the positive charge induced by the protons.
Which of the following is a neutralization reaction?
a
SiCl4 + 4 H2O → H4SiO4 + 4 HC
b
HCl + NaOH → NaCl + H2O
c
6 CO2 + 6 H2O → C6H12O6 + 6 O2
d
2Al + 6HCl → 2AlCl3 + 3H2
Answer:
B
Explanation:
B, Hcl + NaoH = NaCl + H2O
Dipole-dipole interactions are (weaker than, stronger than, equal to) hydrogen bonds.
Answer and Explanation:
Dipole-Dipole interactions are weaker than hydrogen bonds.
Hydrogen bonds are a form of dipole-dipole interactions, being the strongest form of dipole-dipole interactions.
#teamtrees #PAW (Plant And Water)
Help me please I’ll give brainliest answer
Answer:
the answer is c I believe
Which of the following describes how covalent
compounds differ from ionic compounds?
A. ionic bonds form between non metals only. B. ionic bonds are more likely to be gas. C. covalent bonds have a lower melting and boiling point. D. covalent bonds are more likely to be solids
Answer: The answer is C
covalent bonds have a lower melting and boiling point
HOPE THIS HELPS !! IF YOU NEED MORE HELP FEEL FREE TO COMMENT IN THE COMMENT SECTION
Scientists are trying to control the Maillard reaction by?
Answer:
Intervention of Maillard reactions by the addition of natural and synthetic chemical compounds has previously been directed toward removing one of the reactants (the amino groups or the reducing sugars) or adding sulfur-containing compounds, such as sulfur dioxide or N-acetyl cysteine, which inhibit the reactions
Explanation:
What is the percent composition of oxygen in Iron(III) oxide? (Round to three sig figs)
Fe2O3 159.7g/mol
Fe =55.85 x 2 =111.7 g/mol
O = 16.00 x 3 = 48.00 g/mol
____% O
30.1%
do not ask why it just is.
In a reaction 25.00mL of nitric acid required 51.4mL of 0.73M calcium hydroxide. Calculate the grams of nitric acid per liter of solution
Answer:
47.27 g HNO₃
Explanation:
The reaction between nitric acid (HNO₃) and calcium hydroxide (Ca(OH)₂) is the following:
2HNO₃(aq) + Ca(OH)₂(aq) → Ca(NO₃)₂ + 2H₂O(l)
According to the chemical equation, 2 moles of HNO₃ reacts with 1 mol of Ca(OH)₂. At the point of total neutralization, the total number of moles of HNO₃ reacts with the total number of moles of Ca(OH)₂:
2 x moles HNO₃ = moles Ca(OH)₂
The number of moles is equal to the product of molarity of the solution (M) and the volume in liters (V):
M(HNO₃) = ?
M(Ca(OH)₂) = 0.73 M
V(HNO₃) = 25.00 mL x 1 L/1000 mL = 0.025 L
V(Ca(OH)₂) = 51.4 mL x 1 L/1000 mL = 0.0514 L
So, we can write the equation at neutralization point as:
2 x (M(HNO₃) x V(HNO₃)) = M(Ca(OH)₂) x V(Ca(OH)₂)
From this, we can calculate the molarity of HNO₃:
M(HNO₃) = (M(Ca(OH)₂) x V(Ca(OH)₂))/2 x V(HNO₃)
= (0.73 M x 0.0514 L)/(2 x 0.025 L)
= 0.75 M HNO₃
We can convert the molarity from M (mol/L) to g/L by using the molecular weight of HNO₃:
Mw(HNO₃) = 1 g/mol H + 14 g/mol N + (3 x 16 g/mol O) = 63 g/mol
Finally, we multiply the molarity by the molecular weight to obtain the grams of nitric acid per liter of solution:
0.75 mol/L HNO₃ x 63 g/mol = 47.27 g HNO₃
you started out as a single felled zygote.
what process changed you into a person with billions of cells
Answer:
The cell goes through the cell cycle/mitosis
Explanation:
The cell cycle is basically the process of dividing
G1 phase is where the cell grows in size, and make sure that everything is ready to divide.
Synthesis or the S phase is where the cell copies its DNA.
G2 phase is where the cells check that all its DNA has been correctly copied.
Mitosis or M phase, where the cell finally divides in two. If the cells keep on dividing exponentially, they will become billions of cells.
There are 5 moles of N20 at STP. What is the density?
Answer:
5 mole of N2O : 112 litre of N2O
5 mole of N2O : 220 g of N2O
Then,
Density = mass/ volume
= 220/112
= 1.96 g per litre
Please help will mark Brainliest!!!
How many grams of HCL (hydrochloric acid) can you make with 50 grams of Cl.
H + Cl -> HCL is the balanced equation
Answer:
Explanation:
It's 21 /
How many moles are present in 29.4g of Aluminum (AI)? *
Answer:
588 mole
29.4
+29.4
5 8. 8g
which has the higher temperature? An iceberg or a steaming cup of water?
do i have to know the chemical and physical properties of alloys? only chemistry students answer this.
Answer:
yes you do so you know how strong it is how maluble it's is so it can be customised to it's specific use
Answer:
alloy's properties are usually different from those of its component elements. Alloy constituents are usually measured by mass. Unlike pure metals, most alloys do not have a single melting point; rather, they have a melting range in which the substance is a mixture of solid and liquid.
physical properties of alloys:-Alloy steels have a wide range of special properties, such as hardness, toughness, corrosion resistance, magnetizability, and ductility. Nonferrous alloys, mainly copper–nickel, bronze, and aluminum alloys, are much used in coinage.
chemical properties of alloys:-Pure metals are useful but their applications are often limited to each individual metal's properties. Alloys allow metal mixtures that have increased resistance to oxidation, increased strength, conductivity, and melting point; Essentially any property can be manipulated by adjusting alloy concentrations.
dnt learn all thr properties.
these are the main properties..u can learn thse only. hope it will help u
The different between molecules in a liquid and molecules in a gas
Answer:
Gases, liquids and solids are all made up of atoms, molecules, and/or ions, but the behaviors of these particles differ in the three phases. ... gas are well separated with no regular arrangement. liquid are close together with no regular arrangement. solid are tightly packed, usually in a regular pattern.
what are 2 products of an acid base neutralization reaction
Water and NaCI
water and salt
a neutral solution and water
a different acid and base
Answer:
a different acid and base
Explanation:
For each of the following questions give the name of an element from period 2 lithium to neon which matches the description elements may be used once more than once or not at all
a) an element which has atoms with a full outer shell of electrons
b) an element which exists as both diamond and graphite
c) an element that reacts vigorously with cold water
d) a soft metallic element which is stored in oil
PLEASEEE
The elements of period 2 that satisfy the descriptions are;
a) Neon
b) carbon
c) sodium
c) sodium
What is the periodic table?We know that the periodic table is an arrangement of the elements in the order of their reactivity. We know that the elements that we have are arranged into groups and periods.
The elements that are in the same group do have similar chemical properties while the elements that are in the same period do have the same number of shells. The properties of the elements in a periods tends to change across the period.
Learn more about periodic table:https://brainly.com/question/11155928
#SPJ1
1 point
1. A balloon has 1.55 L of air in it exerting a pressure of 105.2 kPa. At
constant temperature, if the pressure increases to 122.0 kPa, what is the
volume?
Answer:
[tex]V_2=1.34L[/tex]
Explanation:
Hello there!
In this case, since this problem is describing how pressure changes as a function of volume and vice versa, it is possible recall the Boyle's law as shown below:
[tex]P_1V_1=P_2V_2[/tex]
Whereas we are asked to compute the volume when the change is pressure is performed (V₂); thus, we proceed as follows:
[tex]V_2=\frac{P_1V_1}{P_2}\\\\V_2=\frac{1.55L*105.2kPa}{122.0kPa}\\\\V_2=1.34L[/tex]
Best regards!
which of the following is not found in cytoplasm
A.water
B.carbohydrates
C.salt
D.vitamins
Answer:
Carbohydrates
Explanation:
this is because cytoplasm is a substance that fills living cells.
1.
John ground some coffee beans into little pieces. He put them into a coffee filter and poured
800 cm3 of boiling water over them to make a jug of coffee.
coffee filter
Coffee
Beans
ON
jug of coffee
(a) Complete the sentences below. For each sentence, choose one of the following
words.
insoluble
soluble
solution
solvent
(0)
The liquid in the jug is brown because parts of the coffee beans
are
in water.
1 mark
LOSPICNOMEWTROS SON INSTRUMENTOS EMPLEADOS PARA CALCULAR DENSIDADES DE SUSTANCIAS LIQUIDAS. SE REALIZO UN EXPERIMENTO PARA DETERMINAR LA DENSIDAD DE UNA SUSTANCIA DESCONOCIDA EN EL LABORATORIO ENCONTRANDO LOS SIGUIENTES VALORES (Picnómetro vacío 8,5g) (Picnómetro lleno 25g) (Capacidad Picnómetro 25mL) . CUAL ES LA DENSIDAD DE LA SOLUCIÓN
Answer:
0.66g/mL
Explanation:
La densidad es una propiedad de la materia definida como la masa de una sustancia en un determinado volumen.
En este problema, podemos hallar la densidad sabiendo que la diferencia de masas del pic vacío y el pic lleno es la masa de la solución y que el volumen que ocupa es de 25mL:
Masa solución:
25g - 8.5g = 16.5g
Así, la densidad será:
16.5g / 25mL =
0.66g/mL