The temperature of a volume of air is 0 degrees Celsius. The temperature of an equivalent volume of air that is twice as hot is (D) 273 degrees C.
This is due to the fact that the absolute temperature scale, or 273.15 Kelvin (K), converts 0 degrees Celsius to K. The temperature of an identical volume of air would be twice as hot as the air at 0 degrees Celsius, or 2 times 273.15 K, or 546.3 K.
However, we must deduct 273.15 from the Kelvin temperature in order to convert this temperature back to degrees Celsius. This is so because the Celsius scale is based on the 273.15 K and 373.15 K freezing and boiling temperatures of water, respectively.
The temperature is 273.15 degrees Celsius, which is the same as the freezing point of water in Celsius, when we subtract 273.15 from 546.3 K. Consequently, 273 degrees Celsius is the right response.
Learn more about temperature scale.
https://brainly.com/question/12500590
#SPJ4
thermal expansion may cause an equipment or piping system overpressure when the liquid is blocked-in
Thermal expansion is a phenomenon in which materials expand when they are heated and contract when they are cooled. This can be a problem in industrial equipment or piping systems that contain liquids, especially when the liquid is blocked-in and cannot move freely.
When the temperature of the liquid increases due to an external heat source, such as a nearby furnace or the sun, the liquid will expand and cause an increase in pressure within the equipment or piping system. This increase in pressure can lead to overpressure, which can be dangerous and can potentially cause equipment failure or system rupture.
It is important to account for thermal expansion when designing industrial equipment and piping systems to ensure that they can safely withstand the changes in pressure caused by temperature fluctuations.
Learn more about equipment ,
https://brainly.com/question/30230359
#SPJ4
If a vehicle starts to skid on water (hydroplane), the driver should ease off the accelerator, brake gently and gently steer back onto the pavement. (true or false)
If a vehicle starts to skid on water (hydroplane), the driver should ease off the accelerator, brake gently and gently steer back onto the pavement True.
If a vehicle starts to skid on water (hydroplane), it means that the tires have lost contact with the road and are riding on a thin layer of water, resulting in a loss of traction and control. To regain control of the vehicle, the driver should ease off the accelerator to reduce the speed, and gently steer the vehicle back onto the pavement.
Braking should be done gently, as sudden braking can cause the wheels to lock up and increase the risk of a spin-out or loss of control. It is important for drivers to stay calm and focused during hydroplaning to avoid accidents.
Learn more about the accelerator
https://brainly.com/question/30660316
#SPJ4
True. To restore control, the driver should gradually release the gas, softly use the brakes and turn the car back onto the roadway.
This is due to the fact that hydroplaning makes it challenging to regulate the direction and speed of the vehicle since it happens when the tyres lose contact with the road due to a layer of water. If the brakes are used too firmly, the wheels may lock up and the skid will worsen. To regain control of the vehicle, it is crucial to avoid making abrupt moves and instead make small adjustments. Additionally, keeping adequate tyre tread depth and the right tyre pressure might aid in avoiding hydroplaning altogether.
Learn more about brakes here:
https://brainly.com/question/19755465
#SPJ11
.A cannonball is launched upward with a velocity of 73.5 m/s at an angle of 20 degrees above the
horizontal.
(a) How long is the cannonball in the air?
(b) How far away does it land?
() How high does it travel? Cut your time in half!
Answer:
time of flight=( 2U sinx ) ÷ g
Explanation:
a)
u=73.5m/s , x= 20° , g =10m/s^2 then t= {2×73.5 × sin 20°} ÷ 10 = 134.2 ÷ 10 = 13.42 sec b) range is the distance, range= (u^2 sin 2 x ) ÷g = ({73.5 }^2 × sin 2 × 20 )÷ 10 =4025.3÷10 = 402.53meters. I couldn't finish the question so sorry
i need some help with this physics question
The response is C. It has bulk and occupies room. All substance has a volume and takes up space, whether it be a solid, liquid, or gas. It is a basic characteristic of matter. While matter can move from hot to cold and perform work.
What are two unbreakable qualities?A metal-skinned hull, steam propulsion, and a main armament of guns equipped to fire explosive shells are the three qualities that define a fighting ironclad. All of these innovations reached their full maturity with the French Navy's November 24, 1859, launch of the "Gloire," but the US Civil War saw the invention of the ironclad.
What are the qualities of matter's properties?Any attribute that may be measured, such as a substance's mass, volume, length, density, colour, malleability, or melting point Properties of matter include point, hardness, smell, temperature, and more.
To know more matter visit:-
https://brainly.com/question/14987556
#SPJ1
Answer: D
Explanation:
How does energy in the food chain flow to an omnivore such as a fox?
A) The fox is a plant eater and receives energy directly from plants.
B) The fox receives energy directly from the sun and the plants it eats.
C) When the fox eats an animal that eats plants, it receives energy directly from the sun.
D) When the fox eats an animal that eats plants, it receives energy indirectly from the sun.
The correct answer is option D) When the fox eats an animal that eats plants, it receives energy indirectly from the sun.
How does energy flow in a food chain?Energy in a food chain flows from the sun, to the producers (plants), to the primary consumers (herbivores), to the secondary consumers (carnivores), and so on. Omnivores, such as foxes, consume both plants and animals, but they typically obtain more of their energy from consuming other animals.
When a fox eats an animal that eats plants, it is receiving energy indirectly from the sun. The plants that the prey animal consumed converted the energy from the sun into organic molecules through the process of photosynthesis. The prey animal then consumed those plants and converted the organic molecules into its own tissues. When the fox eats the prey animal, it is obtaining the energy stored in the prey's tissues.
Learn more about the food chain here:
https://brainly.com/question/7564953
#SPJ1
a classmate bought a new digital thermometer for her child and tried it on herself a few times with these results: 97.3°f, 98.0°f, 99.0°f, and 97.7°f. calculate her mean temperature.
The mean temperature of her child with the following results 97.3°F, 98.0°F, 99.0°F, and 97.7°F is 98° F
The mean temperature is also known as the average of the temperature taken by her with the digital thermometer. The digital thermometer is used to measure the temperature of the body by placing it either orally or axially.
The mean temperature is calculated as the ratio of the sum of all the temperatures recorded and the number of times the frequency with which temperature is recorded.
It can be written as = [tex]= \frac{T_1+T_2+....T_N}{N}[/tex]
where N is the number of observations
Therefore mean temperature
[tex]=\frac{97.3+98.0+99.0+97.7}{4}\\\\=\frac{392}{4}\\\\[/tex]
=98° F
To know more about Mean:
https://brainly.com/question/26941429
#SPJ4
Your classmate's mean temperature is 98°F.
Solution - Hi! To calculate the mean temperature of your classmate after using the digital thermometer, follow these steps:
1. Add up the temperatures: 97.3°F + 98.0°F + 99.0°F + 97.7°F = 392°F
2. Count the number of temperature readings: 4
3. Divide the total temperature by the number of readings: 392°F / 4 = 98°F
Your classmate's mean temperature is 98°F.
to learn more about mean, click on this -
brainly.com/question/30214653
#SPJ11
in a study of the photoelectric effect, a researcher shines low-intensity visible light with a wavelength of 650 nm on a sample of metal. she notices that no photoelectrons are produced. what would happen if she were to increase the intensity of the light by a factor of 10?:
Increasing the intensity of the light by a factor of 10 would increase the number of photoelectrons produced.
The photoelectric effect is a phenomenon in which electrons are emitted from a material when it absorbs electromagnetic radiation, such as light. The energy of the radiation must be greater than the work function of the material for electrons to be emitted.
Increasing the intensity of the light increases the number of photons striking the surface of the metal, which increases the likelihood of electrons being emitted. Therefore, increasing the intensity of the light by a factor of 10 would result in the emission of photoelectrons.
To learn more about photoelectrons, here
https://brainly.com/question/16772624
#SPJ4
block 1 is stacked on top of block 2. block 2 is connected by a light cord to block 3, which is pulled along a frictionless surface with a force f as shown in the diagram. block 1 is accelerated at the same rate as block 2 because of the frictional forces between the two blocks. if all three blocks have the same mass m, what is the minimum coefficient of static friction between block 1 and block 2?
The minimum coefficient of static friction between block 1 and block 2 is (F-f-m*a)/g, which can be calculated by equating the horizontal forces acting on block 1.
How to find the minimum coefficient of static friction between block 1 and block 2?The minimum coefficient of static friction between block 1 and block 2 can be calculated by equating the forces acting on block 1 in the horizontal direction. Since block 1 and block 2 have the same acceleration, the net force on block 1 is:
F - f - μ_smg = m*a
where F is the force applied to block 3, μ_s is the coefficient of static friction between block 1 and block 2, and g is the acceleration due to gravity.
Since block 1 and block 2 have the same mass, we can simplify the above equation to:
F - f - = ma
Solving for μ_s, we get:
μ_s = (F - f - m*a)/g
Therefore, the minimum coefficient of static friction between block 1 and block 2 is (F - f - m*a)/g.
Learn more about Minimum coefficient
brainly.com/question/31157416
#SPJ11
if the wavelength of a wave in a particular medium is tripled, what will happen to the frequency of the wave?
Answer:
V = λ * ν speed of wave in medium
We know the speed of a particular wave in a medium is constant.
ν = V / λ
If λ is increased by 3 then the frequency ν will be reduced by a factor of three to keep the speed constant.
ν' = ν / 3
a 0.45 m pipe that is closed at one end emits a 1683 hz wave that has a wavelength of 0.2 m. determine what harmonic the wave is, the fundamental frequency, the fundamental wavelength, the wave speed,
The harmonic wave is n = (2m - 1), the frequency is 7582 Hz, the wavelength is 4.5 and the wave speed is 336.6 m/s.
What harmonic the wave is, the fundamental frequency, the fundamental wavelength, and the wave speed?In a closed pipe, the wave can only have odd-numbered harmonics, because the closed end of the pipe is a node of the wave. The harmonic number can be determined using the equation:
n = (2m - 1)
where n is the harmonic number and m is an integer.
The wavelength of the wave is given as λ = 0.2 m. The fundamental wavelength is given by the equation:
λ1 = 2L
where L is the length of the pipe. Substituting the value of L, we get:
λ1 = 2(0.45 m) = 0.9 m
The fundamental frequency is given by the equation:
f1 = v / λ1
where v is the speed of the wave. Rearranging the equation, we get:
v = f1 * λ1
The wave speed can also be determined using the equation:
v = f * λ
where f is the frequency of the wave and λ is its wavelength.
Equating the two expressions for v, we get:
f1 * λ1 = f * λ
Solving for the fundamental frequency, we obtain:
f1 = (λ1 / λ) * f = (0.9 m / 0.2 m) * 1683 Hz ≈ 7582 Hz
Therefore, the fundamental frequency of the wave is approximately 7582 Hz.
The harmonic number is given by the equation:
n = (2m - 1)
where m is an integer. To determine the harmonic number, we can rearrange the equation to get:
m = (n + 1) / 2
Substituting the value of λ and λ1, we can solve for n:
λ = λ1 / n
n = λ1 / λ = 0.9 m / 0.2 m = 4.5
Since n must be an integer, the nearest odd integer to 4.5 is 5.
Therefore, the wave is the fifth harmonic.
Finally, we can determine the wave speed using the equation:
v = f * λ = (1683 Hz) * (0.2 m) = 336.6 m/s
Therefore, the wave speed is approximately 336.6 m/s.
Learn more about wave
brainly.com/question/25954805
#SPJ11
thinking back to chapter 8, a tidal wave is which wave type?
A tidal wave is a type of wave known as a "tidal bore," also called a "seiche."
Tidal bores occur when the rising tide creates a wall of water that moves up a river or narrow bay against the direction of the river or bay's flow.
This occurs due to the gravitational forces of the Moon and Sun, which cause the ocean's water level to rise and fall in a regular cycle of tides.
As the high tide crests at the mouth of the river or bay, a surge of water propagates upstream and collides with the lower water level.
The interaction between the two bodies of water generates a large, powerful wave that moves upstream.
The height and speed of the tidal bore depend on the shape and depth of the river or bay, as well as the astronomical tide cycle.
Tidal waves can be dangerous, as they can cause damage to boats, structures, and ecosystems along the river or bay.
Some tidal bores can reach heights of up to several meters and travel at speeds of up to 30 km/h (18.6 mph), creating dangerous conditions for those caught in their path.
Despite their destructive potential, tidal bores can also be an attraction for surfers and thrill-seekers who ride the waves on specialized boards or boats.
Tidal bore surfing has become a popular sport in some parts of the world, such as the Qiantang River in China and the Amazon River in Brazil.
To know more about tidal wave visit link :
https://brainly.com/question/12604849
#SPJ11
credit-card magnetic strips experiments carried out on the television show mythbusters determined that a magnetic field of 1000 gauss is needed to corrupt the information on a credit card's magnetic strip. (they also busted the myth that a credit card can be demagnetized by an electric eel or an eelskin wallet.) suppose a long, straight wire carries a current of 6.5 a . part a how close can a credit card be held to this wire without damaging its magnetic strip? express your answer using two significant figures.
A credit card can be held up to 1.04 cm away from the wire with a magnetic field of 1000 gauss.
How close can a credit card be held to this wire without damaging its magnetic strip?We can use the formula for the magnetic field around a long, straight wire to calculate the magnetic field at a certain distance from the wire:
B = μ0I / (2pi*r)
where B is the magnetic field, μ0 is the permeability of free space (4pi10^-7 T*m/A), I is current, and r is the distance from the wire.
We want to find the maximum distance r such that the magnetic field is less than 1000 gauss (0.1 tesla). We can rearrange the formula to solve for r:
r = μ0I / (2pi*B)
Plugging in the values given, we get:
r = (4pi10^-7 Tm/A)(6.5 A) / (2pi0.1 T) = 1.04 cm
Therefore, a credit card can be held up to 1.04 cm away from the wire without damaging its magnetic strip, rounded to two significant figures.
Learn more about magnetic field
brainly.com/question/14848188
#SPJ11
an investigator places a sample 1.0 cm from a wire carrying a large current; the strength of the magnetic field has a particular value at this point. later, she must move the sample to a 3.0 cm distance, but she would like to keep the field the same. part a by what factor must she increase the current?
The investigator must increase the current by a factor of 5 to keep the magnetic field strength constant when the distance is increased from 1.0 cm to 5.0 cm.
When a current flows through a wire, it produces a magnetic field around it. The strength of this field depends on the current and the distance from the wire. According to the inverse-square law, the magnetic field strength decreases as the distance from the wire increases.
For a long, straight wire carrying a current I, the magnetic field strength at a distance r from it can be calculated as follows:
B = μ0 I ÷ (2πr)
where μ0 is the permeability of free space, which is a constant.
If the magnetic field strength is to remain constant when the distance is increased from 1.0 cm to 5.0 cm, then we can set the two expressions for B equal to each other:
μ0 I ÷ (2πr₁) = μ0 (xI) ÷ (2πr₂)
where x is the factor by which the current must be increased.
Simplifying this expression, we get:
x = r₂ ÷ r₁ = 5.0 cm ÷ 1.0 cm = 5
To learn more about magnetic follow the link:
https://brainly.com/question/3160109
#SPJ4
The surface of which jovian moon most resembles the pack ice of the Arctic Ocean? A) Amalthea B) Io C) Europa D) Ganymede E) Callisto.
a common way to describe acceleration is to express it in multiples of g, earth's gravitational acceleration. if a dragster accelerates at a rate of 39.2 m/s2, how many g's does the driver experience?
The acceleration of the dragster in multiple of g, when he accelerates at a rate of 39.2 m/s², is 4g.
To express the acceleration of the dragster in multiples of g, we need to divide the acceleration by the acceleration due to gravity on Earth.
Number of g's = (Acceleration of the dragster) / (Earth's gravitational acceleration)
First, we need the value of Earth's gravitational acceleration, which is approximately 9.81 m/s².
Now, we can use the given acceleration of the dragster (39.2 m/s²) and the formula:
Number of g's = (39.2 m/s²) / (9.81 m/s²) = 4
Therefore, the driver of the dragster experiences an acceleration equivalent to about 4 times the acceleration due to gravity on Earth.
Learn more about acceleration:
https://brainly.com/question/460763
#SPJ11
Please help I need to answer fast the fate of my graduation depends on it.
First, we need to find the total mass of the system by adding the masses of the two objects: m_total = m1 m2 = 50.0 kg 75.0 kg = 125.0 kg Next, we can plug in the given force and mass values into the equation: F = ma 40.0 N = 125.0 kg * a Solving for a: a = 40.0 N
125.0 kg * a
Solving for a:
a = 40.0 N / 125.0 kg
a = 0.32 m/s^2
Therefore, the acceleration of the system is 0.32 m/s^2.
Power supplies are rated for efficiency based on. drawn to supply sufficient power to the PC. a. volts b. watts c. amperes d. ohms. Study These Flashcards.
B. Power supplies are rated for efficiency based on watts. The efficiency of a power supply is determined by the ratio of its output power (in watts) to its input power (also in watts).
The lesser the effectiveness, the lower power is wasted as heat and the lesser the power given to the computer's factors. In addition to effectiveness, power inventories are rated for maximum affair power, which is generally expressed in watts. This standing represents the loftiest quantum of power that the power force can deliver to the computer's factors.
Other conditions, similar as voltage and amperage conditions for their different affair connections, may be assigned to power inventories. The maximum voltage and current that the power force can produce on each connection are indicated by these conditions. Ohms, on the other hand, are a resistance unit that's infrequently used to grade power force.
Learn more about power at
https://brainly.com/question/30562600
#SPJ4
The speedometer on a bicycle indicates that you travel 60 m
while your speed increases from 0 to 10 m/s
. The radius of the wheel is 0.30 m
. The bicycle moves with constant acceleration.
Find the tangential acceleration of the rim of the wheel.
Find the rotational acceleration of the wheel.
Find the rotational speed of the wheel just after traveling 60 m.
Tangential acceleration of the rim of the wheel = Change in speed / time = (10 m/s - 0 m/s)/(60 m/ 0.30 m) = 333.33 m/s²
What is acceleration?Acceleration is the rate of change of velocity over time. It is a vector quantity, which means it has both magnitude and direction. Acceleration can be caused by a variety of factors, including an external force, a change in mass, or a change in velocity. Acceleration is typically measured in meters per second squared (m/s²). When an object is accelerating, its velocity changes over time.
Rotational acceleration of the wheel = Tangential acceleration / Radius of the wheel = 333.33 m/s² / 0.30 m = 1111.11 rad/s²
Rotational speed of the wheel just after traveling 60 m
= Initial rotational speed + Acceleration x Time
= 0 + 1111.11 rad/s² x (60 m / 0.30 m)
= 37,037.04 rad/s
To learn more about acceleration
https://brainly.com/question/460763
#SPJ1
look again at the visible-light view of m82. what is the source of the white and blue light that dominates the image?
In the visible-light view of M82, the source of the white and blue light that dominates the image is mainly due to the presence of young, massive stars. These stars emit high amounts of energy, which results in a strong blue and white glow.
The white and blue light in the visible-light view of M82 is primarily coming from young, hot, massive stars that are forming in the galaxy's intense starburst regions. These stars emit large amounts of ultraviolet radiation, which ionizes the surrounding gas and causes it to glow brightly in visible light. Additionally, some of the blue light may be due to scattered starlight off of dust particles in the galaxy's disk.
The blue light comes from the hot, young stars, while the white light is a combination of light emitted by various types of stars within the galaxy. The high star formation rate in M82 contributes to the abundance of these bright stars and the overall appearance of the galaxy.
To know more about ultraviolet radiation:
https://brainly.com/question/30547511
#SPJ11
water is drawn from a well in a bucket tied to the end of a rope whose other end wraps around a cylinder of mass 50 kg and diameter 25 cm. as you turn this cylinder with a crank, the rope raises the bucket. if the mass of a bucket of water is 20 kg, what torque must you apply to the crank to raise the bucket of water at a constant speed?
m_c (mass of cylinder)=50 kg
d=25 cm so r=12.5 cm = 0.125 m m_b
(mass of bucket)=20 kg
So using the equations: RT = � = I � RT= I � (m_b)g-T= (m_b)aR And from what I understand, this is the same as the tangential acceleration? (m_b)g-T=(m_b) � r = F T= ( i � ) / r (m_b)g -(( i � ) / r ) = m � r � ( ((m_b)r) + (I /R ) ) = (m_b)g Leaving us with the final : � = ((m_b)g)/(((m_b)r) + (I /r)) Using this equation, I found I = 0.390625 and the final answer would be 35 rad/s^2 Sorry for such a long post--this is my first time on the website and I read the rules so hopefully I've done everything correctly! Thank you all!
/
what is the weight of a cubic meter of cork? could you lift it? (use 400 kg/m^3 for the density of cork.)
To lift this weight, you would need a force greater than or equal to 3,920 N (assuming you are lifting it vertically).
weight = [tex]1 m^3 \times 400 kg/m^3 \times9.8 m/s^2[/tex]
weight = 3,920 N
Force is a physical quantity that describes the interaction between objects or systems. The SI unit of force is the Newton (N), which is defined as the amount of force required to accelerate a one kilogram mass at a rate of one meter per second squared.
Force is also responsible for deformations in solid objects, such as stretching or compressing a spring. Nuclear forces are responsible for the interactions between subatomic particles, and frictional forces are the forces that resist motion when two surfaces come into contact. Gravitational force is the force that pulls objects towards each other due to their masses. Electromagnetic force is responsible for the interactions between charged particles, such as in electricity or magnetism.
To learn more about Force visit here:
brainly.com/question/24115409
#SPJ4
Question 1 of 10
Which term describes the part of the wave indicated below?
m
A. Crest
B. Compression
C. Rarefaction
D. Trough
The part of the wave indicated below is the wave crest (option A)
What is a wave crest?A wave crest is the highest point or peak of a wave. It is the point on the wave where the upward displacement of the medium is maximum. In ocean waves, for example, the crest is the highest point of the wave above the average water level, while in sound waves, the crest is the point of maximum air pressure.
The distance between two consecutive wave crests is called the wavelength, and it determines the frequency and energy of the wave. Wave crests are an important concept in the study of waves and are used to describe wave behavior and properties.
Learn about waves crest here https://brainly.com/question/31419131
#SPJ1
which of the following is a normative statement? a. a bicycle has two wheels. b. you should wear a helmet when cycling. c. the sky is blue. d. electricity follows the path of least resistance. e. a unicycle has five wheels.
The normative statement in this list is b.
Which of the following is a normative statement?The normative statement in this list is b. "You should wear a helmet when cycling." This is because it is expressing a value judgment and prescribing a course of action, rather than simply stating a fact like the other options. The other statements are all descriptive and objective, stating things that are generally true or observable, such as the number of wheels on a bicycle or the color of the sky. The statement about electricity is a scientific principle, but it is still not normative in nature.
Learn more about normative statement
brainly.com/question/15823409
#SPJ11
a drawing, provided by the manufacturer, that details permitted interconnections between the intrinsically safe and associated apparatus or between the nonincendive field wiring apparatus or associated nonincendive field wiring apparatus is called a
The drawing provided by the manufacturer, which details the permitted interconnections between intrinsically safe and associated apparatus or between nonincendive field wiring apparatus or associated nonincendive field wiring apparatus, is called a wiring diagram.
A wiring diagram typically includes detailed information about the wiring connections between components, as well as any necessary safety measures such as grounding or shielding. It may also include information about the voltage, current, and power requirements of the system, as well as any limitations or restrictions on the use of particular components or configurations.
This diagram is a critical part of the installation and maintenance process for intrinsically safe and nonincendive electrical systems, as it helps ensure that the correct connections are made and that the system operates safely and effectively.
To learn more about diagram follow the link:
https://brainly.com/question/11729094
#SPJ4
The complete question is:
A drawing, provided by the manufacturer, that details permitted interconnections between the intrinsically safe and associated apparatus or between the nonincendive field wiring apparatus or associated nonincendive field wiring apparatus is called a ______________
A bow is drawn so that it has 40 J of potential energy. When fired, the arrow will have a kinetic energy of: Select one: O a. 80) o b. 20) O 0.60) O d. 40)
When a bow is drawn and has 40 J of potential energy, the arrow's kinetic energy when fired will be:
Your answer: d. 40 J
Explanation:
Potential energy is the energy that an object possesses due to its position, configuration, or state of being. It is stored energy that has the potential to do work in the future. The amount of potential energy that an object has depends on its position or configuration relative to other objects or systems. For example, a bow that is pulled back has potential energy that can be released as kinetic energy when it is released.
Kinetic energy, on the other hand, is the energy that an object possesses due to its motion. It is the energy that an object possesses because it is in motion and is able to do work by causing a change in another object's motion or position. The amount of kinetic energy that an object has depends on its mass and its velocity. For example, a moving car has kinetic energy that can be transferred to another object if it collides with it.
When the bow is drawn, it stores potential energy. When fired, this potential energy is converted into kinetic energy for the arrow. In an ideal situation with no energy loss, the arrow's kinetic energy will be equal to the bow's potential energy. Therefore, the arrow will have a kinetic energy of 40 J.
To learn more about Potential Energy and Kinetic Energy. Please Visit:
https://brainly.com/question/30176483
#SPJ11
if an object were to suddenly shrink and decrease its moment of inertia by a factor of 3, what is the difference in energy between the final and initial rotational kinetic energies?
The difference in energy between the final and initial rotational kinetic energies is -(2/3) times the initial rotational kinetic energy.
The rotational kinetic energy of an object is given by the formula:
[tex]K_rot = \frac{1}{2} * I * w^{2}[/tex]
where K_rot is the rotational kinetic energy, I am the moment of inertia, and ω is the angular velocity.
If the moment of inertia of an object decreases by a factor of 3, then the rotational kinetic energy will decrease by a factor of 3 as well.
Let K1 be the initial rotational kinetic energy of the object, and K2 be the final rotational kinetic energy of the object. Then, we can write:
K2 = (1/3) * K1
The difference in energy between the final and initial rotational kinetic energies is:
ΔK = K2 - K1
ΔK = (1/3) * K1 - K1
ΔK = [tex]-(2/3)*k1[/tex]
To know more about rotating kinetic energy:
https://brainly.com/question/30107920
#SPJ4
What is the receiving body of the force?
To answer this question, more context is needed, since force can be exerted by one object on another object. In this case, the body receiving the force would be the object that receives the force, that is, the object on which the force is being exerted. For example, if a person pushes a box, the receiving body of the force would be the box, since it is receiving the force exerted by the person.
Answer:
The question is not quite clear but the receiving body of a force will be the object on which the force is being exerted upon. Hope this helps.
A book sitting on a desk with the surface area of the cover of .05 m^2. The atmospheric pressure is 100kPa. What is the downward force of the atmosphere on the book?
The downward force of the atmosphere on the book is equal to the pressure of the atmosphere multiplied by the surface area of the book's cover and it is calculated to be 5 N.
What is atmospheric pressure?Atmospheric pressure is the pressure exerted by the weight of the Earth's atmosphere on objects on or near the surface of the Earth. It is caused by the gravitational attraction of the Earth on the gases in the atmosphere. The atmospheric pressure varies with altitude, temperature, and weather conditions, and is typically measured in units of pressure such as pascals (Pa) or kilopascals (kPa).
Force = Pressure x Area
Where:
Pressure = 100 kPa (given)
Area = 0.05 m² (given)
Substituting the given values, we get:
Force = 100 kPa x 0.05 m²
Force = 5 N
Therefore, the downward force of the atmosphere on the book is 5 N.
To know more about atmospheric pressure, visit:
https://brainly.com/question/30166820
#SPJ1
A 3. 0-kg mass moving in the positive x direction with a speed of 10 m/s collides with a 6. 0-kg mass initially at rest. After the collision, the speed of the 3. 0-kg mass is 8. 0 m/s, and its velocity vector makes an angle of 35° with the positive x axis. What is the magnitude of the velocity of the 6. 0-kg mass after the collision?
The magnitude of the velocity of the 6.0 kg mass after the collision is approximately 1.7 m/s.
We can solve this problem using conservation of momentum and conservation of kinetic energy. Conservation of momentum states that the total momentum of a system is conserved if there are no external forces acting on it. In this case, the system is the two masses.
Let p1 and p2 be the initial momenta of the 3.0 kg and 6.0 kg masses, respectively, and p1' and p2' be their final momenta after the collision. Since the 6.0 kg mass is initially at rest, we have:
p1 = m1v1 = (3.0 kg)(10 m/s) = 30 kg·m/s
p2 = m2v2 = (6.0 kg)(0 m/s) = 0 kg·m/s
After the collision, the 3.0 kg mass moves at an angle of 35° with a speed of 8.0 m/s. We can break its velocity into x- and y-components:
vx = v1' cos(35°) = 8.0 m/s cos(35°) ≈ 6.6 m/s
vy = v1' sin(35°) = 8.0 m/s sin(35°) ≈ 4.6 m/s
The total momentum of the system after the collision is:
p1' + p2' = m1v1' + m2v2'
We can use conservation of momentum to say that p1 + p2 = p1' + p2', so:
p1' + p2' = 30 kg·m/s
Substituting in the known values, we have:
(3.0 kg)(6.6 m/s) + (6.0 kg)v2' = 30 kg·m/s
Solving for v2', we get:
v2' = (30 kg·m/s - 19.8 kg·m/s) / 6.0 kg ≈ 1.7 m/s
To know more about velocity, here
https://brainly.com/question/17127206
#SPJ4
the electric motor of a model train accelerates the train from rest to 0.720m/s in 22.0milliseconds (ms). the total mass of the train is 875g. Find the average power delivered to the train during its acceleration.
To find the average power delivered to the train during its acceleration, we need to use the formula:
Power = Work / Time
First, we need to find the work done on the train during its acceleration. We can use the formula:
Work = Force x distance
The force on the train is equal to its mass times its acceleration:
Force = Mass x Acceleration
Using the given values, we get:
Force = 0.875 kg x (0.720 m/s^2) = 0.63 N
The distance the train travels during its acceleration can be found using the formula:
Distance = (1/2) x Acceleration x Time^2
Plugging in the given values, we get:
Distance = (1/2) x 0.720 m/s^2 x (22.0 x 10^-3 s)^2 = 0.17 m
So the work done on the train during its acceleration is:
Work = 0.63 N x 0.17 m = 0.1071 J
Now we can plug this value into the formula for power:
Power = Work / Time
The time given is 22.0 milliseconds, which is 0.0220 seconds:
Power = 0.1071 J / 0.0220 s = 4.87 W
Therefore, the average power delivered to the train during its acceleration is 4.87 watts.
To know more about acceleration :
https://brainly.com/question/29135987
#SPJ11