About 75% of MCC students believe they can achieve the American dream and about 65% of Ferris State Universtiy students believe they can achieve the American dream. Construct a 99% confidence interval for the difference in the proportions of Montcalm Community College students and Ferris State University students who believe they can achieve the American dream. There were 100 MCC students surveyed and 100 FSU students surveyed. a. With 99% confidence the difference in the proportions of MCC and FSU students who believe they can achieve the American dream is (round to 3 decimal places) and (round to 3 decimal places). b. If many groups of 100 randomly selected MCC students and 100 randomly selected FSU students were surveyed, then a different confidence interval would be produced from each group. About percent of these confidence intervals will contain the true population proportion of the difference in the proportions of MCC students and FSU students who believe they can achieve the American dream about percent will not contain the true population difference in proportions.

(a) If you bet on a single number for 25 rounds, the expected value of your net gain is -$1.32.

(b) The standard deviation of your net gain is 28.0126.

(c) The estimate the chance you come out ahead is  48.17%.

(a) The probability of winning a single bet is 1/38 and the expected net gain for each bet is -1 + (35/1)1/38 = -0.0526. Therefore, the expected value of your net gain after 25 rounds is 25(-0.0526) = -$1.32.

(b) The variance of the net gain for each bet is [(-1 - (-0.0526))^2*(37/38) + (35 - (-0.0526))^2*(1/38)] = 31.3728. So, the variance of the net gain for 25 rounds is 25*31.3728 = 784.32, and the standard deviation is the square root of the variance, which is 28.0126.

(c) The chance of coming out ahead can be estimated using the normal distribution with mean -1.32 and standard deviation 28.0126. We want to find the probability that the net gain is greater than zero, which is equivalent to finding the probability that a standard normal random variable Z is greater than (0 - (-1.32))/28.0126 = 0.0471.

Using a standard normal table or calculator, we find that this probability is approximately 0.4817 or 48.17%. So, there is about a 48.17% chance of coming out ahead after 25 rounds of betting on a single number.

To know  more  about standard deviation visit:

brainly.com/question/16555520

#SPJ11

0.86​ inches. The departure from the average would then be 0.86​ inches since 2.43-1.57=0.86​​ inches.

a) 0.5​ inches. The difference between the average rainfall and the actual rainfall for last June is 0.67-0.17=0.50​ inches.

b) 1.14​ inches. Because the departure from the average was negative, the actual rainfall was 0.36​ inches less than the average rainfall. Thus, 1.5-0.36=1.14​ inches was the actual rainfall last July.

c) 2.43​ inches. The average rainfall for these three months is 0.67+1.5+1.57=3.74​ inches. Last June it rained 0.17​ inches and last July it rained 1.14 inches. So, it would need to have rained 3.74-0.17-1.14=2.43​ inches last August so that the total amount of rain equaled the average rainfall for these three months.  

0.86​ inches. The departure from the average would then be 0.86​ inches since 2.43-1.57=0.86​​ inches.

Learn more about average ,

https://brainly.com/question/24057012

#SPJ4

Full Question ;

The departure from the average is the difference between the actual amount of rain and the average amount of rain for a given month.

The historical average for rainfall in Albuquerque, NM for June, July, and August is shown in the table.

June 0.67 inches

July 1.5 inches

August 1.57 inches

Last June only 0.17 inches of rain fell all month. What is the difference between the average rainfall and the actual rainfall for last June? Answer with decimals.

The departure from the average rainfall last July was -0.36 inches. How much rain fell last July? Answer with decimals.

How much rain would have to fall in August so that the total amount of rain equals the average rainfall for these three months? Answer with decimals.

What would the departure from the average be in August in that situation? Answer with decimals.

The formula for finding the slope and length of a segment indicates;

Slope of [tex]\overline{QR}[/tex] = -7, length of [tex]\overline{QR}[/tex] = 5·√2

Slope of [tex]\overline{RS}[/tex] = -1, length of [tex]\overline{RS}[/tex] = 5·√2

Slope of [tex]\overline{ST}[/tex] = -7, length of [tex]\overline{ST}[/tex] = 5·√2

Slope of [tex]\overline{TQ}[/tex] = -1, length of [tex]\overline{TQ}[/tex] = 5·√2

The length of a segment on a coordinate plane can be found using the distance formula for finding the distance, d, between two points (x₁, y₁), and (x₂, y₂), which can be expressed as follows;

d = √((x₂ - x₁)² + (y₂ - y₁)²))

The slope of [tex]\overline{QR}[/tex] = (3 - (-4))/(5 - 6) = -7

The length of [tex]\overline{QR}[/tex] = √((3 - (-4))² + (5 - 6)²) = 5·√2

The slope of [tex]\overline{RS}[/tex] = (8 - 3)/(0 - 5) = -1

The length of [tex]\overline{RS}[/tex] = √((8 - 3)² + (0 - 5)²) = 5·√2

The slope of [tex]\overline{ST}[/tex] = (8 - 1)/(0 - 1) = -7

The length of [tex]\overline{ST}[/tex] = √((8 - 1)² + (0 - 1)²) = 5·√2

The slope of [tex]\overline{TQ}[/tex] = (-4 - 1)/(6 - 1) = -1

The length of   [tex]\overline{TQ}[/tex]   = √((-4 - 1)² + (6 - 1)²) = 5·√2

The quadrilateral QRST can best be described as a rhombus

Learn more on the properties of a rhombus here: https://brainly.com/question/20627264

#SPJ1

Slope  of the lines that pass through points (5,-8) and (-3,-4) is -1/2

The slope of line passing through two points (x₁, y₁) and (x₂, y₂) is

m=y₂-y₁/x₂-x₁

We have to find slope  of the lines that pass through (5,-8) and (-3,-4)

Slope = -4-(-8)/-3-5

=-4+8/-8

=-4/8

=-1/2

Hence,  slope of the lines that pass through (5,-8) and (-3,-4) is -1/2

To learn more on slope of line click:

https://brainly.com/question/16180119

#SPJ1

Given that a ski set is being sold at 10% discount at $325, we need to find its original price,

Let the original price be x,

Therefore,

90% of x = 325

0.9x = 325

x = 361.11

Hence the original price of the ski set is $361.11.

Learn more about discount, click;

https://brainly.com/question/31430480

#SPJ1

We reject the null hypothesis and conclude that the data supports the claim that the mean height of high school students who play basketball on the school team is less than 73 inches.

Null Hypothesis: The mean height of high school students who play basketball on the school team is 73 inches or greater.

Alternative Hypothesis: The mean height of high school students who play basketball on the school team is less than 73 inches.

We are given a sample size of 40 players with a sample mean of 71 inches and a sample standard deviation of 1.5 inches.

To test our hypothesis, we will use a one-sample t-test with a significance level of 0.05.

Using a t-distribution table with 39 degrees of freedom (n-1), we find the critical t-value to be -1.686.

We calculate the test statistic as:

t = (sample mean - hypothesized mean) / (sample standard deviation / sqrt(sample size))

t = (71 - 73) / (1.5 / sqrt(40)) = -4.38

Using a t-distribution table with 39 degrees of freedom, we find the p-value to be almost zero (less than 0.0001).

Since the p-value is less than the significance level of 0.05, we reject the null hypothesis and conclude that the data supports the claim that the mean height of high school students who play basketball on the school team is less than 73 inches.

To learn more about hypothesis visit:

https://brainly.com/question/11560606

#SPJ11

The graph of the reflected rhombus P'Q'R'S' is shown below.

We know that the formula for the reflection of point (a,b) with respect to line y = k is point (a, 2k-b)

i.e., the coordinates of point A(x, y) changes to (x, 2k - y)

Here, the rhombus PQRS with vertices P(-8, 6), Q(-4, 8), R(0, 6), and S(-4, 4) reflected over the line y = 2.

This means that the value of k = 2

P(-8,6) ⇒ P′(-8,2⋅2-6)

            = P′(-8,-2)

Q(-4, 8)⇒ Q′(-4,2⋅2-8)

            = Q′(-4,-4)

R(0, 6) ⇒ R′(0, 2⋅2-6)

             = R′(0,-2)

S(-4,4) ⇒ S′(-4,2⋅2-4)

           = S′(-4,0)

Therefore, the coordintes of reflected rhombus P'Q'R'S' are:

P′(-8,-2), Q′(-4,-4), R′(0,-2), S′(-4,0)

Learn more about the reflection here:

https://brainly.com/question/30270479

#SPJ1

The complete question is:

Rhombus PQRS with vertices P(-8, 6), Q(-4, 8), R(0, 6), and S(-4, 4) REFLECTED over the line y = 2.

Graph the reflected rhombus.

8% for 24 months has the lower finance charge of $296, compared to option b) with a finance charge of $363.50.

To compare the two loans, we need to calculate the finance charge for each option.

For option a) at 8% APR for 24 months, we can use the following formula:

Finance charge = (loan amount x interest rate x time) / 12

Finance charge = (1850 x 0.08 x 24) / 12 = 296

So the finance charge for option a) is $296.

For option b) at 11% APR for 18 months, we can use the same formula:

Finance charge = (loan amount x interest rate x time) / 12

Finance charge = (1850 x 0.11 x 18) / 12 = 363.5

So the finance charge for option b) is $363.50.

Therefore, option a) has the lower finance charge of $296, compared to option b) with a finance charge of $363.50.

For more details regarding finance charge, visit:

https://brainly.com/question/2588555

#SPJ1

To find the function when it is divided by 2x-5 with a quotient of 2x^2-2x-3 and a remainder of -8, follow these steps:

1. Set up the division equation: function = (divisor × quotient) + remainder
2. Substitute the given terms: function = ((2x-5) × (2x^2-2x-3)) - 8

Now, expand and simplify the equation:

3. Multiply the divisor and quotient: function = (4x^3 - 4x^2 - 6x - 10x^2 + 10x + 15) - 8
4. Combine like terms: function = 4x^3 - 14x^2 + 4x + 7

The function in standard form is 4x^3 - 14x^2 + 4x + 7.

Learn more about function in standard form :

https://brainly.com/question/29161979

#SPJ11

The answer is: a. It would converge to the shape of a normal distribution.

When you increase your sample size, more data points are included in the sample, resulting in a more accurate representation of the population. As a result, the distribution of the sample means will approach a normal distribution, known as the Central Limit Theorem. This means that the shape of the sampling distribution will become more symmetrical and bell-shaped as the sample size increases.

Learn more about : Central Limit Theorem -https://brainly.com/question/31694540

#SPJ11

The dimensions that minimize the cost subject to the volume constraint are [tex]L = 4 ft, W = 2 ft,[/tex] and [tex]H = 2 ft[/tex] using surface area.

Assuming that the cost of material is proportional to the surface area, we can write the cost function as:

[tex]C = k(2LW + 2LH + WH)[/tex]

where k is a constant of proportionality that depends on the cost of the material. We are given that the cost of the material for the top and bottom is twice the cost of the material for the sides, so we can take k = 3 for simplicity (since the cost of the material for the sides is then 1).

Using the volume constraint as before, we can eliminate one of the variables:

[tex]H = 16/LW[/tex]

When this is used as a cost function substitution,

[tex]C = 3(2LW + 2LH + WH) = 6LW + 96/L + 48/W[/tex]

To find the critical points of C, we need to find where the partial derivatives are zero:

[tex]dC/dL = 6W - 96/L^2 = 0[/tex]

[tex]dC/dW = 6L - 48/W^2 = 0[/tex]

When we simultaneously solve these equations, we obtain:

L = 4 ft

W = 2 ft

H = 2 ft

Therefore, the dimensions that minimize the cost subject to the volume constraint surface area are L = 4 ft, W = 2 ft, and H = 2 ft.

To learn more about surface area visit:

https://brainly.com/question/29101132

#SPJ4

The equation represents a growth function.

We have,

The equation y = (7/4)x/3 can be simplified to y = (7/12)x.

Since the coefficient of x, 7/12, is positive, this means that as x increases, y also increases.

In other words, y is growing as x increases, and the growth rate is determined by the slope of the line, which is 7/12.

To understand this intuitively, we can think of the equation as representing a line on a graph.

The slope of the line, which is equal to the coefficient of x, tells us whether the line is increasing or decreasing.

In this case, the positive slope tells us that the line is increasing, which means that y is also increasing as x increases.

This is consistent with a growth function.

Therefore,

The equation represents a growth function.

Learn more about equations here:

https://brainly.com/question/17194269

#SPJ1

The 90% confidence interval for the difference between the proportions of all users of the two toothpaste who will never switch is (0.009, 0.101).

To construct a 90% confidence interval for the difference between the proportions of all users of the two toothpaste who will never switch, we can use the following formula:

CI = (p1 - p2) ± Zα/2 * √(p1(1-p1)/n1 + p2(1-p2)/n2)

where p1 and p2 are the sample proportions, n1 and n2 are the sample sizes, and Zα/2 is the critical value from the standard normal distribution for the desired confidence level.

Plugging in the values given in the problem, we get:

p1 = 90/450 = 0.20

p2 = 80/550 = 0.145

n1 = 450

n2 = 550

α = 0.10 (since we want a 90% confidence interval, which corresponds to a significance level of 0.10)

Zα/2 = 1.645 (from the standard normal distribution table)

Substituting these values into the formula, we get:

CI = (0.20 - 0.145) ± 1.645 * √((0.20 * 0.80 / 450) + (0.145 * 0.855 / 550))

Simplifying, we get:

CI = 0.055 ± 0.046

Therefore, the 90% confidence interval for the difference between the proportions of all users of the two toothpaste who will never switch is (0.009, 0.101).

To learn more about proportions visit:

https://brainly.com/question/31548894

#SPJ11

The marketing firm should sample at least 752 people to estimate the approval rating for their next advertising campaign with a margin of error of 3% and 90% confidence.

To estimate the sample size for a marketing firm's advertising campaign approval rating with a margin of error of 3% and a 90% confidence level, you should use the following steps:

Step 1: Identify the critical value for a 90% confidence level. For a 90% confidence level, the critical value (z-score) is approximately 1.645.

Step 2: Determine the population proportion (p) and its complement (q). Since we don't have a specific proportion, we can use the conservative estimate of p=0.5 and q=0.5, which will result in the largest required sample size.

Step 3: Calculate the required sample size (n) using the formula:

n = (Z^2 * p * q) / E^2

where Z is the critical value, p and q are the population proportions, and E is the margin of error.

n = (1.645^2 * 0.5 * 0.5) / 0.03^2
n ≈ 751.18

Since we cannot have a fraction of a person in a sample, we'll round up to the nearest whole number.

Therefore to achieve a margin of error of 3% with a 90% confidence level, the marketing firm should sample approximately 752 people for their next advertising campaign's approval rating.

Know more about margin of error here:

https://brainly.com/question/10218601

#SPJ11

Using the expression 24÷4=6 to calculate the equation, the solution is 60

From the question, we have the following parameters that can be used in our computation:

24÷4=6

To find 240÷4, we simply multiply both sides of 24÷4=6 by 10

Using the above as a guide, we have the following:

10 * 24 ÷ 4 = 6 * 10

Evaluate the products

240 ÷ 4 = 60

Hence, the solution is 60

Read mroe about expression at

https://brainly.com/question/15775046

#SPJ1

The probability that both​ females survived is 0.2961

The table of values is given as

Male Female Child Total

survived 230 339 54 623

died 1190 102 52 1344

total 1420 441 106 1967

For females that survived, we have

P(Female) = 339/623

For two females, we have

P = 339/623 * 339/623

Evaluate

P = 0.2961

Hence, the probability is 0.2961

Read more about probability at

https://brainly.com/question/24756209

#SPJ1

Answer:

Plot the points on the graphing calculator, and then generate the linear regression equation:

y = 18.1x + 104.1

2022 is 11 years since 2011, so

y = 18.1(11) + 104.1 = 303.2

The projected profit for 2002 is about

$303 thousand.

The surface area of the pyramid is 141 in²

Considering the figure, to find the surface area of the regular pyramid, we notice that 3 similar triangular faces and 1 other triangular face.

So, the surface area of the pyramid is A = 3A' + A where A' = 1/2bH where

So, A' = 1/2bh

= 1/2 × 6 in × 14 in

= 3 in × 14 in

= 42 in²

Also,

A' = 1/2bh where

So, A' = 1/2bh

= 1/2 × 6 in × 5 in

= 3 in × 5 in

= 15 in²

So, A = 3A' + A"

= 3 × 42 in² + 15 in²

= 126 in² + 15 in²

= 141 in²

So, the surface area of the pyramid is 141 in²

Learn more about surface area of pyramid here:

https://brainly.com/question/22605638

#SPJ1

It is important to interpret the results with caution and consider the potential limitations and sources of error in the data.

The Type of Dangerous Restraint Technique Training has a statistically significant impact on the number of lawsuits, injuries, and citizen complaints. The F-ratios for these three negative consequences are greater than the critical value, and their p-values are less than the alpha level of 0.05, indicating that the null hypothesis that there is no difference between the means of the groups can be rejected. This means that the Type of Dangerous Restraint Technique Training is associated with significant differences in the number of lawsuits, injuries, and citizen complaints.

The Type of Dangerous Restraint Technique Training does not have a statistically significant impact on the number of deaths. The F-ratio for the number of deaths is less than the critical value, and its p-value is greater than the alpha level of 0.05, indicating that the null hypothesis cannot be rejected. This means that the Type of Dangerous Restraint Technique Training is not associated with a significant difference in the number of deaths.

The Type of Dangerous Restraint Technique Training has its most statistically significant impact on the number of citizen complaints. The F-ratio for citizen complaints is the highest among all the negative consequences, and its p-value is the lowest, indicating that the Type of Dangerous Restraint Technique Training is associated with the most significant difference in the number of citizen complaints.

There are a few potential concerns about the data in the table. Firstly, the sample of police academies may not be representative of all police academies in the country, which may limit the generalizability of the findings. Secondly, the data may be subject to reporting bias or measurement error, which may affect the accuracy and reliability of the results. Thirdly, the ANOVA assumes that the data meet certain assumptions, such as normality and homogeneity of variances, which may not be met in this case. For example, the number of deaths is highly skewed towards the high end, and the variances of the groups may not be equal. These violations of assumptions may affect the validity and robustness of the ANOVA results. Therefore, it is important to interpret the results with caution and consider the potential limitations and sources of error in the data.

To learn more about measurement visit:

https://brainly.com/question/4725561

#SPJ11

The child will always have the recessive trait in their phenotype.

If both parents are homozygous for a recessive trait, it means they both carry two copies of the recessive allele. Let's assume that the dominant allele is represented by 'A' and the recessive allele by 'a'. Since both parents are homozygous for the recessive trait, their genotype must be 'aa'.

When these parents have children, they will each contribute one 'a' allele, resulting in all of their children inheriting the recessive allele. The probability that their child will have the trait is therefore 100%. The probability of not inheriting the trait is 0%.

Therefore, the answer to the question is 0%. The child will always have the recessive trait in their phenotype.

To learn more about  visit:

https://brainly.com/question/20730322

#SPJ11

Degrees of freedom (df) refers to the number of independent pieces of information that can be used to estimate a parameter. The p-value is the probability of observing a test statistic as extreme or more extreme than the one calculated from your sample data, assuming the null hypothesis is true.

However, I can still help you understand the terms and how they relate to your question.

1. Test Statistic Name: In this case, the test statistic is the t-statistic, which is used for hypothesis testing in statistics when the population standard deviation is unknown.

2. Degrees of Freedom: Degrees of freedom (df) refers to the number of independent pieces of information that can be used to estimate a parameter. In a t-test, the degrees of freedom are typically represented as "t(df)". In your example, the degrees of freedom are 45 (t(45)).

3. Test Statistic Value: This is the calculated value of the t-statistic, which you will need to compute based on the data provided. It is used to compare against the critical value or to find the p-value. You need to provide the data or information about the test to calculate this value.

4. P-value: The p-value is the probability of observing a test statistic as extreme or more extreme than the one calculated from your sample data, assuming the null hypothesis is true. You will need to compute the p-value using the t-statistic value.

Learn more about Degrees of Freedom:

brainly.com/question/31424137

#SPJ11

Answer: Answer below in pic

Step-by-step explanation:

:)

The alternating series test can be used to show convergence of the alternating series I, II, and III given in the options and the correct answer to this question is Option A. I only.

The alternating series test is a method used to determine the convergence or divergence of alternating series. According to the alternating series test, an alternating series converges if the absolute value of its terms decreases monotonically to zero. In other words, if the absolute value of the terms in an alternating series eventually becomes smaller and smaller until it is less than or equal to a certain positive number, then the series converges.

In conclusion, the alternating series test can be used to show the convergence of series I and III, but not for series II. Therefore, the answer is (A) I only.

To learn more about the Alternating series, visit:

https://brainly.com/question/17011687

#SPJ11

The differential equation solution is y(x) = [tex]-9e^_{(-0.6x)[/tex] for the initial condition y(0) = -9.

The given differential condition is dy/dx = -0.6y. To address this condition, we can isolate the factors by partitioning the two sides by y and duplicating the two sides by dx:

dy/y = -0.6dx

Then, we can incorporate the two sides. On the left side, we get ln|y|, and on the right side, we get -0.6x+C, where C is an inconsistent steady of joining:

ln|y| = -0.6x+C

To find the specific arrangement that fulfills the underlying condition y(0) = -9, we can substitute x = 0 and y = -9 into the situation:

ln|-9| = -0.6(0)+C

Rearranging, we get:

C = ln(9)

In this manner, the specific arrangement that fulfills the underlying condition is:

y(x) = [tex]-9e^_{(-0.6x)[/tex]

This is the last response.

To learn more about differential equation, refer:

https://brainly.com/question/30811657

#SPJ4

The complete question is:

Solve the separable differential equation dy/dx = 0.9y, and find the particular solution satisfying the initial condition y(0) = -9. y(x) = e^((0.9/2)x^2-ln(9)).

We can conclude that the largest interval in which the solution is certain to exist is (1,π/2).

To determine the largest interval in which the solution is certain to exist, we need to check the coefficients and initial values for any discontinuities or singularities.

Notice that the coefficient of the second derivative term, (t-4)cos(ty''), becomes zero at t=4, which can cause a singularity in the solution. Moreover, the coefficient of the first derivative term, In(t-1), becomes negative for t<1, which can cause instability issues in the solution.

Since the initial value problem is given for t=2, the interval of certain existence must contain t=2. Therefore, we can eliminate option a (-5,4) and option b (π/2,4) since neither of them contain t=2.

For option c (1,[infinity]), the coefficient of the first derivative term becomes negative for t<1, which violates the condition for the existence of a solution. Therefore, option c can also be eliminated.

The only remaining option is d (1,π/2). This interval contains t=2 and does not cause any discontinuity or instability issues in the coefficients. Therefore, we can conclude that the largest interval in which the solution is certain to exist is (1,π/2).

To learn more about eliminated visit:

https://brainly.com/question/15104783

#SPJ11

Answer:

58,000 / (π(2^2))

= 58,000/(4π)

= 14,500/π

= 4,615 people per square mile

By using the area of the square There are 1,400 plants per square meter.

To calculate this, we first need to determine the area of the square meter in terms of the row spacing and number of plants per meter. Since the row spacing is 25 cm, or 0.25 meters, we can fit 4 rows per meter (1 meter / 0.25 meters = 4 rows). Therefore, the area of the square meter would be 4 rows x 1 meter = 4 square meters.

Next, we need to determine the total number of plants in this 4 square meter area. Since there are 35 plants per linear meter, there are 35 plants per row. So, the total number of plants in the 4 square meter area would be 35 plants/row x 4 rows = 140 plants.

Finally, to determine the number of plants per square meter, we divide the total number of plants by the area of the square meter:

Therefore, there are 1,400 plants per square meter.

Learn more about area

https://brainly.com/question/25292087

#SPJ4

Wingate Metal Products, Inc.'s capital structure weights are 60% for debt financing and 40% for equity financing

To find Wingate Metal Products, Inc.'s capital structure weights for debt and equity financing, you need to first identify the weighted average cost of capital (WACC), after-tax cost of debt financing, and cost of equity financing.

The information provided is as follows:
- WACC: 9.0%
- After-tax cost of debt financing: 7%
- Cost of equity financing: 12%

Let's use the formula for WACC:

WACC = (Weight of Debt * Cost of Debt) + (Weight of Equity * Cost of Equity)

Since the weights of debt and equity financing must sum up to 1, we can represent the weight of debt as "x" and the weight of equity as "1-x". Now, we can rewrite the formula:

9.0% = (x * 7%) + ((1-x) * 12%)

Now, solve for x (weight of debt financing) and 1-x (weight of equity financing):

9.0% = 7x + 12 - 12x
9.0% = 12 - 5x
5x = 3%
x = 0.6

The weight of debt financing is 0.6, and the weight of equity financing is 1-0.6 = 0.4.

Therefore, Wingate Metal Products, Inc.'s capital structure weights are 60% for debt financing and 40% for equity financing.

Capitalhttps://brainly.com/question/30590270

#SPJ11