according to iupac nomeclature rules which set of chemical name and formula for the same compound is correct?

Answer: In the core of the Sun hydrogen is being converted into helium. This is called nuclear fusion. It takes four hydrogen atoms to fuse into each helium atom. During the process some of the mass is converted into energy.

Answer:

Nomenclature is the process of naming chemical compounds with different names so that they can be easily identified as separate chemicals. ... For example, organic compounds include molecules with carbon rings and/or chains with hydrogen atoms (see picture below).01-Jul-2014

Nomenclature: Iron (II) Chloride

Compound: FeCl2

Answer:

Quantum number

Explanation:

The reaction, Fe2O3 + 3CO------> 2Fe + 3CO2 is an oxidation-reduction reaction.

An oxidation-reduction reaction is a reaction in which there is a change in oxidation number from left to right in the reaction. This is because, a specie is oxidized and another specie is reduced.

In the reaction;  Fe2O3 + 3CO------> 2Fe + 3CO2, we can see that the oxidation number of iron decreased from +3 on the left hand side to zero on the right hand side. The oxidation number of carbon was increased from + 2 to +4.

Learn more: https://brainly.com/question/10079361

Answer:

A

Explanation:

EDGE2022

Answer:

the act of watching somebody/something carefully, especially to learn something

Explanation:

hope this helps you!

Answer:

hope this helps

Explanation:

noun

noun1.

noun1.the act of watching somebody/something carefully, especially to learn something

Answer:

Mole is a number that connects mass of a substance with its number of particles. 2500 g of O2 = 1/32 x 2500 = 78.125 moles

Explanation:

have a great day

Answer:

barium sulfate is insoluble (unable to dissolve) in water.

the general equation for the reaction between solid barium sulfate and nacl solution is this:

BaSO4 (s) + 2NaCl (aq) --> BaCl (aq) + Na2SO4 (aq)

to sum this up, to compare the solubility,

1. barium sulfate cant dissolve in pure water.

2. barium sulfate dissolves in nacl solution to give aqueous (aq) barium chloride (bacl) and aqueous sodium sulfate (na2so4), as shown in the equation above.

good luck!

The solubility of barium sulfate in pure water to zero as compare to the solubility in NaCl solution.

Solubility is a property of any substance that defines how easily can be any substance will get dissolved or show dissolution.

         BaSO₄ (s) + 2NaCl (aq) → BaCl (aq) + Na₂SO₄ (aq)

Hence, barium sulphate is insoluble in water.

To know more about solubility, visit the below link:
https://brainly.com/question/16903071

The mass of water, H₂O produced from the reaction is 72.06 g

We'll begin by calculating the mass of NH₄NO₃ that reacted and the mass of H₂O produced from the balanced equation.

NH₄NO₃ —> N₂O + 2H₂O

Molar mass of NH₄NO₃ = 80.03 g/mol

Mass of NH₄NO₃ from the balanced equation = 1 × 80.03 = 80.03 g

Molar mass of H₂O = 18.01 g/mol

Mass of H₂O from the balanced equation = 2 × 18.01 = 36.02 g

From the balanced equation above,

80.03 g of NH₄NO₃ reacted to produce 36.02 g of H₂O

Finally, we shall determine the mass of H₂O produced by the reaction of 160.1 g of NH₄NO₃.

From the balanced equation above,

80.03 g of NH₄NO₃ reacted to produce 36.02 g of H₂O.

Therefore,

160.1 g of NH₄NO₃ will react to produce = (160.1 × 36.02) / 80.03 = 72.06 g of H₂O.

Thus, the mass of water, H₂O produced from the reaction is 72.06 g

Learn more on stiochoimetry: https://brainly.com/question/15048051

Answer:

A reaction that has the same number and type of atoms on each side of the equation

Explanation:

A pex

Answer:

year 1 is 5.5%

year 2 is 7.5%

year 3 is 10.2%

Explanation:

since,

length of the transect covered in seaweed / total lenth of transect x 100

then,

0.55 / 10.0 x 100 = 5.5

and

0.75 / 10.0 x 100 = 7.5

and

1.02 / 10.0 x 100 = 10.2

you could also just move the decimal to the right once

:)

Answer:

Mass of 0.5 moles of CO2 is 22 gm.

Explanation:

1 mole of CO2 = 44 gm

0.5 mole of CO2 = 0.5 × 44 = 22 gm

Answer: The shadow zone is the area of the earth from angular distances of 104 to 140 degrees from a given earthquake that does not receive any direct P waves. The shadow zone results from S waves being stopped entirely by the liquid core and P waves being bent (refracted) by the liquid core.

Explanation: 104 to 140 degrees from a given earthquake

We are given –

Here–

[tex]\qquad[/tex][tex] \pink{\bf \longrightarrow Initial\: velocity = 100 \:km/hr}[/tex]

[tex]\qquad[/tex][tex] \sf \longrightarrow Initial\: velocity = \dfrac{ 100 \times 1000}{3600} \:m/s[/tex]

[tex]\qquad[/tex][tex]\pink{ \bf \longrightarrow Initial\: velocity = 27.78\: m/s} [/tex]

Now –

[tex]\qquad[/tex]____________________________

[tex]\qquad[/tex][tex] \purple{\bf \longrightarrow Acceleration = \dfrac{Final\: Velocity -Initial \:Velocity }{Time}}[/tex]

[tex]\qquad[/tex][tex] \purple{\bf \longrightarrow Acceleration = \dfrac{v -u}{t}}[/tex]

[tex]\qquad[/tex][tex] \sf \longrightarrow Acceleration = \dfrac{(0- 27.78)}{1800}[/tex]

[tex]\qquad[/tex][tex] \sf \longrightarrow Acceleration =\cancel{ \dfrac{- 27.78}{1800}}[/tex]

[tex]\qquad[/tex][tex] \purple{\bf \longrightarrow Acceleration = -0.015 \: m/s^2} [/tex]

[tex]\qquad[/tex]_______________________________

Answer:

B.

Explanation:

Correct:  b. The mass of the Carbon-14 sample is greater than the Carbon-12 sample, but the reactivity of both samples was the same .

- C-14 has two additional neutrons, so is heavier than C-12.  The chemical properties will be the same, however.

The statement that compounds have the same physical and chemical properties as the elements they are made from is false.

Compounds are substances formed when two or more elements are chemically combined together.

For example, water is a chemical compound formed when hydrogen and oxygen are chemically combined in a ratio of 2 to 1.

Therefore, the statement that compounds have the same physical and chemical properties as the elements they are made from is false.

Learn more about compounds at: https://brainly.com/question/10942055

Answer:

b a c a b

Explanation:

Answer:

I got it Right in Study Island

Explanation:

Answer:

Looking at the table, Silver is definitely the most conductible metal there. It has the lowest electrical resistivity which means it allows for an easier flow of electrons, and it also has a higher thermal conductivity which means it would exhibit a higher conductivity. Diamond has the highest thermal conductivity, but the electrical resistivity is extremely high and due to its giant covalent/tetrahedral molecular structure (being an allotrope of Carbon), electrons can't necessarily jump around. Diamond wouldn't be a conductor at all.

The most simplest composition and structures provide a higher thermal conductivity. For example, with Diamond, we know that it is a structure made of covalent bonds of carbon, so its thermal conductivity is high.

Answer:

Q1

Copper

Explanation:

Copper is a good conductor of electricity, its resistance is high, and its chemical activity is weak

Q2

The thermal conductivity of a specific material is highly dependent on a number of factors. These include the temperature gradient, the properties of the material, and the path length that the heat follows.

Answer:

Dimitri mendleev and Albert something. I forgot his last name. I think ghorso. Albert ghorso.

Answer:

Boyle's most famous discovery had to do with how the pressure and volume of gases relate, either this or he discovered the volume of a gas decreases with increasing pressure...

Explanation:

...

try putting 66 grams CO2 for answer

Explanation:

it shows covalent bonds

The type of bond the diagram shows is covalent bond. As shown the sharing of electrons in the diagram.

Bonds are defined as any of the interactions that lead to atoms joining together to form molecules, ions, crystals, and other stable species that make up the familiar materials found in everyday life. The ability to build molecules is made possible by a chemical bond, which is a strong attraction between atoms, ions, or molecules. Chemical bonds that hold molecules together also form temporary connections vital for life.

Covalent bond are defined as a type of chemical link where atoms share electrons to create electron pairs. Low melting and boiling temperatures, low vaporization heat, low water solubility, and poor conductivity are four characteristics of covalent compounds.

Thus, the type of bond the diagram shows is covalent bond. As shown the sharing of electrons in the diagram.

To learn more about bonds, refer to the link below:

https://brainly.com/question/13559044

#SPJ2

Answer:

i think its 5.8

Explanation:

Answer:

Fatty Acids

A lipid is an organic compound such as fat or oil. Organisms use lipids to store energy, but lipids have other important roles as well. Lipids consist of repeating units called fatty acids. Fatty acids are organic compounds that have the general formula CH3(CH2)nCOOH" role="presentation" style="display: inline-table; font-style: normal; font-weight: normal; line-height: normal; font-size: 17.6px; text-indent: 0px; text-align: left; text-transform: none; letter-spacing: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px; margin: 0px; position: relative;">CH3(CH2)nCOOHCH3(CH2)nCOOH, where n" role="presentation" style="display: inline-table; font-style: normal; font-weight: normal; line-height: normal; font-size: 17.6px; text-indent: 0px; text-align: left; text-transform: none; letter-spacing: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px; margin: 0px; position: relative;">nn usually ranges from 2 to 28 and is always an even number. There are two types of fatty acids: saturated fatty acids and unsaturated fatty acids.

Saturated Fatty Acids

In saturated fatty acids, carbon atoms are bonded to as many hydrogen atoms as possible. This causes the molecules to form straight chains, as shown in the figure below. The straight chains can be packed together very tightly, allowing them to store energy in a compact form. This explains why saturated fatty acids are solids at room temperature. Animals use saturated fatty acids to store energy.

Figure 14.2.1" role="presentation" style="display: inline-table; font-style: normal; font-weight: normal; line-height: normal; font-size: 16px; text-indent: 0px; text-align: left; text-transform: none; letter-spacing: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px; margin: 0px; position: relative;">14.2.114.2.1: Structures of saturated and unsaturated fatty acids.

Unsaturated Fatty Acids

In unsaturated fatty acids, some carbon atoms are not bonded to as many hydrogen atoms as possible due to the presence of one or more double bonds in the carbon chain. Instead, they are bonded to other groups of atoms. Wherever carbon binds with these other groups of atoms, it causes chains to bend (see figure above). The bent chains cannot be packed together very tightly, so unsaturated fatty acids are liquids at room temperature. Plants use unsaturated fatty acids to store energy.

Figure 14.2.2" role="presentation" style="display: inline-table; font-style: normal; font-weight: normal; line-height: normal; font-size: 16px; text-indent: 0px; text-align: left; text-transform: none; letter-spacing: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px; margin: 0px; position: relative;">14.2.214.2.2: Saturated fatty acids have only single bonds while monounsaturated fats have one double bond and polyunsaturated fats have more than one double bond.

Lipids and Diet

Unsaturated fat is generally considered to be healthier because it contains fewer calories than an equivalent amount of saturated fat. Additionally, high consumption of saturated fats is linked to an increased risk of cardiovascular disease. Some examples of foods with high concentrations of saturated fats include butter, cheese, lard, and some fatty meats. Foods with higher concentrations of unsaturated fats include nuts, avocado, and vegetable oils such as canola oil and olive oil.

Fructose is a simple carbohydrate sugar, while triglycerides are the lipids or the fats of the body. Thus, option C is accurate.

Triglycerides are lipids of the body that are formed of fatty acids and glycerols. It makes the body fat of the animals and of the plants. They are stored in cells for future use and provide energy when needed.

Fructose is a monomer that is the simplest carbohydrate sugar and is generally found in sugarcane, honey, watermelon, grapes, apples, etc.

Therefore, option C. fructose is sugar and triglyceride is fat is correct.

Learn more about triglycerides and fats here:

https://brainly.com/question/17576593

#SPJ2

Answer:

Raise

Explanation:

H+ ions are acidic and lower the PH of water.

Answer:

C

Explanation:

Acids contain H plus ions. When within a solution or neutralised these ions are released.

The substance which gives H+ ion are called as acid. Vinegar is an acid because it will release H+ in water. Therefore, option C is correct.

Acetic acid and water are combined to create vinegar through a two-step fermentation process. First, yeast consume any liquid derived from a plant source, such as fruits, whole grains, potatoes, or rice, and feed on the sugar or starch therein. It ferments into alcohol.

White vinegar typically contains 93–96% water and 4-7% acetic acid. It can be used to cook, bake, clean, and control weeds. It may also help with weight loss and decrease cholesterol and blood sugar levels.

The sugar is converted to ethanol (ethyl alcohol) by yeast and bacteria in a two-step fermentation process, which is followed by the production of acetic acid. Vinegar is acidic because it contains acetic acid.

Thus, option C is correct.

To learn more about vinegar, follow the link;

https://brainly.com/question/4239583

#SPJ2

Answer:

Hope this answer helps

Explanation: