according to lussac's law, how many liters of hydrogen gas, h2, react with 2 l of nitrogen gas, n2, to produce 4 l of ammonia gas, nh3?select one:a.6 lb.2 lc.4 ld.3 l

Answer:

Rusting of iron

Explanation:

Between the two answer choices of 'Rusting of Iron' and 'Boiling an egg', rusting of iron is considered spontaneous.

In chemistry, spontaneity is considered a process or reaction that happens without any external stimuli, including energy. It is described if a process or reaction will occur on its own without any help.

Note that time in which a process or reaction will occur is not dependent on the spontaneity and does not reflect the rate of reaction.

Boiling an egg needs water and heat (which is energy) in order for the whites and yolk to harden so it is healthy and acceptable for humans to eat. However, the rusting of iron happens on its own over an extended period of time.

Iron rusts over time through a slow reaction of iron with oxygen in presence of water.

The iron (Fe) will react with the Oxygen gas ([tex]O_2[/tex]) to form iron ions ([tex]Fe^2^+[/tex]) over time. The iron ions, now with charge, have more ability to react to other molecules in the air, including water, and creates hydroxide ions ([tex]OH^-[/tex]). These hydroxide ions then react with more Oxygen gas to form rust, which is written as [tex]Fe_2O_3[/tex].

Learn more about rust at: https://brainly.com/question/18909098

The minerals that crystallize early in Bowen's reaction series are the mafic minerals.

These minerals, such as olivine and pyroxene, have a higher melting point and are the first to form as magma cools. As the magma continues to cool, minerals with lower melting points, such as feldspar and quartz, begin to crystallize. Muscovite and potassium feldspar are both part of the group of minerals that form later in the reaction series. The order of crystallization in Bowen's reaction series is important in understanding how rocks form and the different mineral compositions that result. In summary, mafic minerals are the first to crystallize, followed by intermediate and felsic minerals as the magma cools.

to know more about Bowen's reaction series visit:

https://brainly.com/question/4860542

#SPJ11

In a stereospecific reaction, the reactant must possess specific characteristics that determine the stereochemistry of the resulting product.

These characteristics include the presence of stereocenters or chiral centers in the reactant molecule. A stereocenter is an atom, typically carbon, that is bonded to four different substituents, resulting in non-superimposable mirror image structures. The presence of a stereocenter allows for different possible spatial arrangements of atoms, giving rise to stereoisomers.

To ensure stereospecificity, the reactant must have a defined stereochemistry at the stereocenter, meaning that it is in a specific geometric configuration (R or S). The reactant's stereochemistry determines the spatial arrangement of atoms in the product molecule. In a stereospecific reaction, the reactant's stereochemistry remains unchanged during the reaction, and the product is formed with the same stereochemistry as the reactant.

It is important to note that not all reactions are stereospecific, and some reactions may result in a mixture of stereoisomers or racemic mixtures where the stereochemistry is not preserved. Stereospecific reactions play a crucial role in the synthesis of pharmaceuticals, natural products, and other compounds where precise stereochemistry is essential for their biological activity or physical properties.

Know more about stereospecific reaction here:

https://brainly.com/question/30849463

#SPJ11

The provided information states that a 0.0300 M solution of an organic acid has a hydrogen ion concentration ([H+]) of 1.65×10^-3 M.

The hydrogen ion concentration, [H+], is a measure of the concentration of hydrogen ions in a solution and is typically used to determine the acidity of a solution. In this case, the [H+] is given as 1.65×10^-3 M.

It's worth noting that in aqueous solutions, hydrogen ions (H+) are typically associated with anions such as chloride (Cl-) or acetate (CH3COO-). However, without further information, it is not possible to determine the exact identity of the organic acid in the solution.

The given [H+] value of 1.65×10^-3 M indicates that the solution is acidic since it has a higher concentration of hydrogen ions than pure water, which has an [H+] of 1.0×10^-7 M.

Learn more about concentration here:

https://brainly.com/question/3045247

#SPJ11

Determine the number of moles of HCl in the initial solution.

moles HCl = concentration x volume = 0.30 M x 0.0250 L = 0.0075 mol
Since KOH and HCl react in a 1:1 ratio, the number of moles of KOH added to reach the equivalence point (when all HCl has been neutralized) is also 0.0075 mol.

Now we can use the remaining volume of KOH added (19.3 ml = 0.0193 L) to calculate the concentration of OH- ions in the solution:
moles KOH = concentration x volume
0.0075 mol = concentration x 0.0193 L
concentration of KOH = 0.389 M
Since the solution is now neutral (equal concentrations of H+ and OH-), we can use the equation for Kw (the ion product constant for water) to find the pH:
Kw = [H+][OH-] = 1.0 x 10^-14
pH = -log[H+]
[H+] = Kw / [OH-] = 1.0 x 10^-14 / 0.389 M = 2.57 x 10^-13
pH = -log(2.57 x 10^-13) = 12.59

Therefore, the pH of the solution after 19.3 ml of KOH have been added to the HCl is 12.6.

To know more about HCl visit:

https://brainly.com/question/28560398

#SPJ11

The molarity of the solution is approximately 0.00174 M.  To calculate the molarity of a solution, we need to know the mass of the solute (NaCl) and the volume of the solution.

Given:

Mass percent of NaCl in the solution = 0.92%

Volume of the solution = 90.0 mL

Step 1: Convert the mass percent to grams of NaCl.

Assuming 100 g of the solution, 0.92% of that would be NaCl:

0.92 g NaCl = 0.0092 g NaCl

Step 2: Convert the mass of NaCl to moles.

We can use the molar mass of NaCl to convert the mass to moles.

Molar mass of NaCl = 22.99 g/mol (sodium) + 35.45 g/mol (chlorine) = 58.44 g/mol

moles of NaCl = 0.0092 g NaCl / 58.44 g/mol = 0.000157 mol NaCl

Step 3: Convert the volume of the solution to liters.

Since the volume was given in milliliters, we need to convert it to liters.

90.0 mL = 90.0 mL * (1 L / 1000 mL) = 0.090 L

Step 4: Calculate the molarity.

Molarity (M) = moles of solute / volume of solution in liters

M = 0.000157 mol NaCl / 0.090 L = 0.00174 M

Therefore, the molarity of the solution is approximately 0.00174 M.

Learn more about molarity here:

https://brainly.com/question/2817451

#SPJ11

The concentration of the HNO₃ solution is approximately 0.168775 M

To determine the concentration of the HNO₃ solution, we can use the equation:

M₁V₁ = M₂V₂

where M₁ is the concentration of HNO₃,

V₁ is the volume of HNO₃ solution used in the titration,

M₂ is the concentration of NaOH, and

V₂ is the volume of NaOH solution used in the titration.

Given:

V₁ = 20.00 mL (0.02000 L) - volume of HNO₃ solution

V₂= 29.65 mL (0.02965 L) - volume of NaOH solution

M₂ = 0.115 M - concentration of NaOH

Let's substitute these values into the equation:

M₁ * 0.02000 L = 0.115 M * 0.02965 L

M₁ = (0.115 M * 0.02965 L) / 0.02000 L

M₁ ≈ 0.168775 M

Concentration refers to the amount of a substance (solute) present in a given volume or mass of a solution.

It quantifies the relative abundance or density of the solute within the solvent.

Concentration is an essential concept in chemistry and is typically expressed in various units, such as molarity (M), molality (m), mass/volume percent (% m/v), and parts per million (ppm).

To know more abot Concentration refer here:

https://brainly.com/question/3045247#

#SPJ11

Aluminum foil is often used in practical applications due to its unique properties and convenient form factor. Here are a few reasons why aluminum foil is preferred over aluminum rods or powders in certain situations Flexibility and Versatility.

Aluminum foil is a thin, flexible sheet made from aluminum metal. It is commonly used in various household and industrial applications. The foil is created by rolling aluminum ingots between large, heavy rollers until the desired thickness is achieved. It is then cut into sheets of varying sizes.

Aluminum foil possesses several unique properties that make it a versatile material. It is highly malleable, allowing it to be easily bent, shaped, and wrapped around objects. The foil has excellent thermal conductivity, which means it can distribute heat evenly and retain it effectively, making it ideal for cooking and baking.

To know more about Aluminum foil refer to-

brainly.com/question/9177668

#SPJ4

often are multiplicative (the mixed toxicants may multiply each other's effects).

When toxicants are mixed together, they can exhibit synergistic effects, which means that the combined effect of the toxicants is greater than the sum of their individual effects. Synergistic effects are characterized by an enhancement or multiplication of the toxicity when two or more toxicants are present together. This can result in a more significant impact on organisms or systems than would be predicted based on the effects of each toxicant alone.

Synergistic effects are not uncommon in the natural environment and can occur with a variety of toxicants, including both natural and synthetic substances. It is important to note that while synergistic effects are often observed, the specific interactions between different toxicants can vary, and not all combinations will result in synergy.

To know more about synergistic effects refer here

https://brainly.com/question/31620704#

#SPJ11

It would take approximately 32.2 minutes to deposit 3.99g of silver with a constant current of 1.85A.

To determine the time required to deposit 3.99g of silver, we need to use Faraday's Law of Electrolysis. First, we need to calculate the number of moles of silver using the molar mass of silver, which is 107.87g/mol. Therefore, 3.99g of silver is equivalent to 0.037 moles.

Next, we need to use the equation I = Q/t, where I is the current, Q is the charge passed, and t is the time. Since we have a constant current of 1.85A, we can rearrange the equation to solve for t.

Q = It

The charge passed is equal to the current multiplied by time. To determine the charge passed, we need to use Faraday's constant, which is 96,485 C/mol.

Q = nF

Where n is the number of moles and F is Faraday's constant.

Therefore, Q = 0.037 x 96,485 = 3,569.45 C

Now we can solve for time:

t = Q/I

t = 3,569.45/1.85 = 1,930 seconds or 32.2 minutes.

Therefore, it would take approximately 32.2 minutes to deposit 3.99g of silver with a constant current of 1.85A.

To know about current :

https://brainly.com/question/15141911

#SPJ11

The highest value of q without forming a precipitate depends on

Learn more about precipitate

brainly.com/question/30904755

#SPJ11

The chemical equation for O2 binding to haemoglobin to form oxyhemoglobin can be written as follows:

Hb + 4O2 ⇌ Hb(O2)4

In this equation, Hb represents hemoglobin, which is a protein found in red blood cells that is responsible for binding to oxygen and transporting it throughout the body. O2 represents oxygen molecules that are present in the surrounding environment. When these oxygen molecules come into contact with haemoglobin, they bind to it to form oxyhaemoglobin, which is a bright red-colored compound.

The reaction is reversible, meaning that oxyhemoglobin can release the oxygen molecules when it reaches the tissues in the body that require oxygen. This process is facilitated by changes in the shape of the haemoglobin molecule, which are triggered by factors such as changes in pH, temperature, and carbon dioxide levels.

Overall, the binding of oxygen to hemoglobin is a critical process that ensures that oxygen is efficiently transported to the tissues in the body where it is needed for cellular respiration and energy production.

Learn more about haemoglobin here,https://brainly.com/question/24172325

#SPJ11

(a) The binding energy per atom of 80Kr is approximately 0.95 MeV, which was calculated using the mass defect and the equation E=mc^2.

(b) The binding energy per nucleon is approximately 0.0119 MeV/nucleon, calculated by dividing the binding energy per atom by the number of nucleons in the atom.

The binding energy of an atom is the energy required to completely separate its individual nucleons (protons and neutrons) from each other. It is typically expressed in millions of electron volts (MeV) per atom or per nucleon.

To calculate the binding energy per atom and per nucleon for 80Kr:

(a) We can use the equation E = mc^2 to calculate the energy released when the individual nucleons come together to form the nucleus. The mass defect of 80Kr can be calculated as the difference between its actual mass (79.916378 amu) and the sum of the masses of its constituent protons and neutrons (80 amu).

This mass defect represents the mass that is converted to energy during the formation of the nucleus. Converting this energy to MeV and dividing by the number of atoms in one mole (Avogadro's number) gives us the binding energy per atom:

E =[tex]mc^2= (80 amu - 79.916378 amu) x (1.66054 x 10^-27 kg/amu) x (2.998 x 10^8 m/s)^2[/tex]

= [tex]9.146 x 10^-11 J[/tex]

= 5.72 MeV

Binding energy per atom = [tex](5.72 MeV / 6.022 x 10^23) x 10^6 = 0.95[/tex]MeV/atom

Therefore, the binding energy per atom of 80Kr is approximately 0.95 MeV.

(b) To calculate the binding energy per nucleon, we divide the binding energy per atom by the number of nucleons in the atom (protons plus neutrons):

Binding energy per nucleon = Binding energy per atom / (number of protons + number of neutrons)

Number of protons = atomic number = 36

Number of neutrons = mass number - atomic number = 80 - 36 = 44

Binding energy per nucleon = 0.95 MeV/atom / 80 nucleons = 0.0119 MeV/nucleon

Therefore, the binding energy per nucleon of 80Kr is approximately 0.0119 MeV/nucleon.

Learn more about: binding energy

brainly.com/question/31817434

#SPJ11

The chemical formula for the nickel(II) complex with chloride ions as counterions is [NiCl₄]²⁻. In this formula, the square brackets indicate that the nickel ion (Ni²⁺) is surrounded by four chloride ions (Cl⁻) in a coordination complex.

The nickel ion acts as the central metal atom, while the chloride ions act as ligands, donating their lone pairs of electrons to form coordinate bonds with the nickel ion. The coordination number of the nickel ion in this complex is four, indicating that it is surrounded by four chloride ligands. The overall charge of the complex is 2-, suggesting that the complex has gained two extra electrons, balancing the charge of the nickel ion and the chloride ions.

This chemical formula represents a specific arrangement of atoms and ions in the complex, providing a concise and standardized representation of its composition.

Learn more about chemical formula here:

https://brainly.com/question/32018188

#SPJ11

In the given question, (2, 1, -1, -1/2), (2, 1, 0, -1/2), (2, 1, +1, -1/2), (2, 1, -1, +1/2), (2, 1, 0, +1/2), and (2, 1, +1, +1/2) are the possible sets of quantum numbers of a 2p electron.

Quantum numbers specify the energy, position, and orientation of an electron in an atom.

For a 2p electron, the principal quantum number n is 2, and the orbital angular momentum quantum number l is 1. The magnetic quantum number [tex]\rm m_l[/tex] can take on the values of -l to +l, which are -1, 0, and +1 for a 2p electron. The spin quantum number [tex]\rm m_s[/tex] can be either +1/2 or -1/2 for an electron.

The possible sets of quantum numbers for a 2p electron are:

Therefore, the six possible sets of quantum numbers for a 2p electron are (2, 1, -1, -1/2), (2, 1, 0, -1/2), (2, 1, +1, -1/2), (2, 1, -1, +1/2), (2, 1, 0, +1/2), and (2, 1, +1, +1/2), respectively.

Learn more about quantum number here:

https://brainly.com/question/32116992

#SPJ12

The concentration of the barium hydroxide solution is approximately 6.72 x 10^(-4) M.

To determine the concentration of a barium hydroxide (Ba(OH)2) solution based on its pH, we need to use the concept of pOH and the dissociation of the hydroxide ion (OH-) in water.

First, let's calculate the pOH of the solution using the formula:

pOH = 14 - pH

pOH = 14 - 10.52

pOH ≈ 3.48

Since barium hydroxide is a strong base, it will dissociate completely in water, producing two hydroxide ions (OH-) for every one barium ion (Ba2+). Therefore, the concentration of hydroxide ions will be twice the concentration of barium hydroxide.

Next, we can convert the pOH to hydroxide ion concentration (OH-) by taking the antilog of the pOH value:

[OH-] = 10^(-pOH)

[OH-] = 10^(-3.48)

[OH-] ≈ 3.36 x 10^(-4) M

Since the concentration of barium hydroxide is twice the concentration of hydroxide ions, the concentration of barium hydroxide will be:

[Ba(OH)2] ≈ 2 * [OH-]

[Ba(OH)2] ≈ 2 * (3.36 x 10^(-4))

[Ba(OH)2] ≈ 6.72 x 10^(-4) M

Therefore, the concentration of the barium hydroxide solution is approximately 6.72 x 10^(-4) M.

Learn more about hydroxide here:

https://brainly.com/question/31820869

#SPJ11

The concentration of the NaCl solution is 0.0171 M. Concentration refers to the amount of solute (the substance being dissolved) present in a given amount of solution. It is usually expressed in units of moles per liter (mol/L), or molarity.

To calculate the concentration of a solution, we need to know the amount of solute (in moles) and the volume of the solution.

First, we need to convert the mass of NaCl to moles:

molar mass of NaCl = 58.44 g/mol

moles of NaCl = 0.100 g / 58.44 g/mol = 0.00171 mol

Next, we need to convert the volume of the solution to liters:

volume of solution = 100.0 ml = 0.100 L

Finally, we can calculate the concentration of the solution (in units of molarity, or M):

concentration = moles of solute / volume of solution = 0.00171 mol / 0.100 L = 0.0171 M

Learn more about The Concentration: https://brainly.com/question/29375939

#SPJ11

When an atom loses electrons, the size of the atom increases, and the number of protons in the nucleus remains the same. This means that the number of electrons in the atom decreases, resulting in a negatively charged atom (an anion).

When an atom gains electrons, the size of the atom decreases, and the number of protons in the nucleus increases. This means that the number of electrons in the atom increases, resulting in a positively charged atom (a cation). The size of an atom is determined by the number of protons in the nucleus, which is known as the atomic number. The atomic number remains the same whether an atom gains or loses electrons. However, the number of electrons in the atom can change, resulting in a change in the atom's charge.

The number of valence electrons in an atom is the number of electrons in the outermost energy level of the atom. The valence electrons are the ones that are involved in chemical reactions, and they determine the atom's chemical behavior. When an atom gains or loses electrons, the number of valence electrons changes, which can result in a change in the atom's chemical behavior.

Learn more about electrons visit: brainly.com/question/25674345

#SPJ4

In order to answer your question about missing reactants, reagents, or products in a chemical transformation, I need specific information about the reaction you are referring to.

Depending on the reaction type and the functional groups involved, the missing reactants, reagents, or products can vary.

Chemistry plays a crucial role in determining the reaction outcome, so it's essential to provide adequate information about the reaction conditions and stereochemistry where necessary.

Generally, when proposing a reaction, it's crucial to consider the reaction mechanism and the energetics involved to predict the most likely products and reaction pathways.

Once I have more specific information about the reaction you are referring to, I can provide a more accurate answer to your question.

Read more about Reactants.

https://brainly.com/question/29035733

#SPJ11

To calculate the heat of the solution of KCl, we can use the equation:q = mCΔT, where q is the heat transferred, m is the mass of the solution, C is the specific heat capacity of water, and ΔT is the change in temperature.

GivenMass of KCl = 0.75 g

Mass of H2O = 35.0 g

Initial temperature (T₁) = 24.8 °C

Final temperature (T₂) = 23.6 °C

Specific heat capacity of water (C) = 4.18 J/g·°C (approximately)

Calculate the heat transferred during the temperature change of the water:

q₁ = m₁CΔT

m₁ = mass of water = 35.0 g

ΔT = T₂ - T₁ = 23.6 °C - 24.8 °C = -1.2 °C

q₁ = (35.0 g)(4.18 J/g·°C)(-1.2 °C) = -177.12 J

Next, we need to calculate the heat transferred for the dissolution of KCl:

q₂ = m₂ΔH

m₂ = mass of KCl = 0.75 g

ΔH = heat of solution per mole of KCl

To find the heat of solution per mole of KCl, we need to convert the mass of KCl to moles:

Molar mass of KCl = 39.1 g/mol + 35.45 g/mol = 74.55 g/mol (approximate)

moles of KCl = mass of KCl / molar mass of KCl

moles of KCl = 0.75 g / 74.55 g/mol ≈ 0.0101 mol

Now we can calculate q₂ using the molar quantity:

q₂ = moles of KCl × ΔH

Since q₁ and q₂ represent the total heat transfer, we can sum them to get the total heat transferred:

q = q₁ + q₂

Finally, to express the heat of solution in kilojoules per mole of KCl, we need to convert the total heat transferred from joules to kilojoules and divide by the moles of KCl:

Heat of solution (ΔH) = (q₁ + q₂) / moles of KCl

Learn more about Heat of solution here ;

https://brainly.com/question/28649460

#SPJ11

a) C-O is more polar than C-C.

b) P-Cl is more polar than P-Br.

c) Si-Cl is more polar than Si-S.

d) F-Cl is more polar than F-Br.

e) P-O is more polar than P-S.

To determine which bond is more polar in each pair, we need to compare the electronegativity of the atoms involved in each bond. The more electronegative atom in each bond will attract the shared electrons more strongly, resulting in a more polar bond.

a) C-O is more polar than C-C because oxygen is more electronegative than carbon.

b) P-Cl is more polar than P-Br because chlorine is more electronegative than bromine.

c) Si-Cl is more polar than Si-S because chlorine is more electronegative than sulfur.

d) F-Cl is more polar than F-Br because chlorine is more electronegative than bromine.

e) P-O is more polar than P-S because oxygen is more electronegative than sulfur.

Learn more about the electronegativity: https://brainly.com/question/3393418

#SPJ11

A. Isomerases.

The enzyme responsible for the interconversion of dihydroxyacetone-3-phosphate and glyceraldehyde-3-phosphate is called triosephosphate isomerase (TPI).

This enzyme catalyzes the reversible isomerization of the two compounds, converting dihydroxyacetone-3-phosphate into glyceraldehyde-3-phosphate, and vice versa.

Isomerases are a category of enzymes that catalyze the interconversion of isomers - molecules that have the same molecular formula but different structural arrangements.

In the case of TPI, it catalyzes the interconversion of two isomers of triosephosphate - dihydroxyacetone-3-phosphate and glyceraldehyde-3-phosphate.

To know more about Isomerases refer here

brainly.com/question/31669222#

#SPJ11

The magnitudes of Kf and Kb, also known as the freezing point depression constant and boiling point elevation constant, respectively,

are dependent on both the identity of the solvent and the temperature.

The identity of the solvent is important because different solvents have different molecular structures and properties that affect the way they interact with solutes.

The solute's ability to interact with the solvent is critical in determining the extent to which the solute affects the solvent's freezing and boiling points.

Temperature also plays a role in determining Kf and Kb because the rates of molecular interactions between solutes and solvents change with temperature.

As temperature increases, the kinetic energy of molecules increases, and this affects the ability of solutes to interact with solvents.

The magnitude of Kf and Kb changes with temperature because the rate of molecular interactions between solutes and solvents changes with temperature.

In conclusion, the magnitudes of Kf and Kb depend on the identity of the solvent and temperature. Solvents and solutes interact differently,

and this affects the extent to which the solute affects the solvent's freezing and boiling points. Temperature also affects molecular interactions between solutes and solvents, which in turn affects the magnitudes of Kf and Kb.

To know more about freezing point refer here

https://brainly.com/question/31357864#

#SPJ11

Approximately 4.68 grams of NH4Cl are needed to prepare 350 mL of a 0.25 M ammonium chloride solution.

To calculate the mass of NH4Cl needed to prepare a 0.25 M ammonium chloride solution, we need to use the formula:

Molarity (M) = (moles of solute) / (volume of solution in liters)

First, let's convert the given volume of the solution to liters:

350 mL = 350/1000 = 0.35 L

Now we rearrange the formula to solve for moles of solute:

moles of solute = Molarity (M) × volume of solution (L)

moles of solute = 0.25 M × 0.35 L = 0.0875 moles

The molar mass of NH4Cl is 53.49 g/mol (NH4: 14.01 g/mol, Cl: 35.45 g/mol).

Finally, we can calculate the mass of NH4Cl needed:

mass = moles of solute × molar mass

mass = 0.0875 moles × 53.49 g/mol = 4.677375 g

for such more questions on solution

https://brainly.com/question/25326161

#SPJ8

The number of moles of Zn(NO₃)₂ that can be produced from 23.87 grams of AgNO₃ and excess Zn is 0.07 mole

First, we shall obtain the mole present in 23.87 g of AgNO₃. Details below:

Mole = mass / molar mass

Mole of  AgNO₃ = 23.87 / 169.9

Mole of  AgNO₃ = 0.140 mole

Finally, we shall determine the mole of Zn(NO₃)₂ produced. This is shown below:

Zn + 2AgNO₃ → 2Ag + Zn(NO₃)₂

From the balanced equation above,

2 moles of AgNO₃ reacted to produce 1 mole of Zn(NO₃)₂

Therefore,

0.140 mole of AgNO₃ will react to produce = (0.140 ×1) / 2 = 0.07 mole of Zn(NO₃)₂

Thus, the number of mole of Zn(NO₃)₂ produced from the reaction is 0.07 mole

Learn more about mole produced:

https://brainly.com/question/13375719

#SPJ1

The enthalpy changes when a cube of ice (2.00 cm on edge) is brought from 10.0 °C to a final temperature of 23.2 °C is -31.4 kJ.

To calculate the enthalpy change, we need to consider the different stages involved. First, we need to determine the heat required to raise the temperature of the ice cube from -10.0 °C to 0.0 °C using the equation:

Q₁ = m × c × ΔT

Where Q₁ is the heat absorbed, m is the mass of the ice cube, c is the specific heat capacity of ice, and ΔT is the change in temperature. The mass of the ice cube can be calculated using the given density:

m = ρ × V

Where ρ is the density of ice and V is the volume of the ice cube.

Next, we calculate the heat required for the phase change from ice at 0.0 °C to water at 0.0 °C:

Q₂ = m × ΔHf

Where ΔHf is the enthalpy of fusion of ice.

Finally, we calculate the heat required to raise the temperature of the water from 0.0 °C to 23.2 °C:

Q₃ = m × c × ΔT

The total enthalpy change is given by:

ΔH = Q₁ + Q₂ + Q₃

Substituting the calculated values into the equations and considering the units, we find that the enthalpy change is -31.4 kJ. The negative sign indicates that the process is exothermic, meaning heat is released to the surroundings.

Therefore, the enthalpy change of bringing a 2.00 cm ice cube from 10.0 °C to 23.2 °C is -31.4 kJ, indicating that heat is released during the process.

To know more about density, refer here:

https://brainly.com/question/29775886#

#SPJ4

Complete question here:

What is the enthalpy change when cube of ice 2.00 cm on edge brought from 10.0 PC to final temperature of 23.2 *C? For ice_ use density of 0.917 glcm , specific heat capacity o 2.01 J & and an enthalpy of fusion of 6,01 kl/mol,

Sulfur can also achieve a full outer shell by losing six electrons to become a sulfur ion with a 2- charge. The electronic configuration of a sulfur atom is 1s²2s²2p⁶3s²3p⁴, meaning that it has 6 electrons in its valence shell (the outermost shell), which can hold up to 8 electrons.

A sulfur atom has six electrons in its outermost shell (valence shell). To fill the outermost s and p subshells, the sulfur atom needs to gain two more electrons, since the s subshell can hold up to 2 electrons and the three p subshells can hold up to 6 electrons (2 electrons in each).

You can learn more about sulfur atom in the link: https://brainly.com/question/17021671

#SPJ11

Since the force constant is zero, the two protons in an H2 molecule experience no force when they are at the equilibrium spacing. This means that the protons do not repel each other and are stable in this configuration.

Given:

Equilibrium spacing of the two protons in H2 molecule: 0.074 nm

Mass of a hydrogen atom: 1.67×10^(-27) kg

To calculate the force constant (k) of the H2 molecule, we can use Hooke's Law:

F = k * x

Where:

F is the force

k is the force constant

x is the displacement from equilibrium

At equilibrium, the force is zero, so we have:

0 = k * 0

This implies that the force constant (k) is zero at equilibrium.

Therefore, since the force constant is zero, the two protons in an H2 molecule experience no force when they are at the equilibrium spacing. This means that the protons do not repel each other and are stable in this configuration.

Learn more about molecule  here:

https://brainly.com/question/30465503

#SPJ11

 This is because the halogenation of alkanes is specifically used for the formation of chlorides, bromides, or iodides, but not fluorides.          

  Option-(D).

Fluorination of alkanes typically requires harsher conditions than simple halogenation, such as using elemental fluorine gas or highly reactive fluorinating agents.

Halogenation is a chemical reaction in which one or more halogen atoms (fluorine, chlorine, bromine, or iodine) are added to a molecule.

This reaction is commonly used for the functionalization of alkanes, which are typically unreactive compounds due to the strength of their C-H bonds.

Halogenation of alkanes can be achieved by treating the alkane with a halogen and light or heat.

The reaction proceeds via a radical mechanism, in which a halogen radical is formed by homolytic cleavage of the halogen molecule.

This halogen radical then reacts with the alkane to form an alkyl radical, which can further react with a halogen molecule to form a halogenated alkane and regenerate the halogen radical.

This process continues until all available alkane molecules are consumed or until a termination step stops the chain reaction.

Halogenation is an important reaction in organic chemistry and has many applications, including in the synthesis of pharmaceuticals, agrochemicals, and materials.

To know more about Halogenation refer here:

https://brainly.com/question/31756809#

#SPJ11