Answer:
[tex]E_{avg}=2.34*10^{-13}J/m^3[/tex]
Explanation:
From the question we are told that:
Frequency [tex]F=800KHz =800*10^3Hz[/tex]
Distance [tex]9.5km=9.5*10^3[/tex]
Electric field amplitude [tex]E=0.23V/m[/tex]
Generally the equation for Average electromagnetic energy density is mathematically given by
[tex]E_{avg}=\frac{1}{2} \epsilon_0 E^2[/tex]
[tex]E_{avg}=\frac{1}{2} 8.85*10^{-12}*(0.23)^2[/tex]
[tex]E_{avg}=\frac{1}{2}* 8.85*10^{-12}*(0.23)^2[/tex]
[tex]E_{avg}=2.34*10^{-13}J/m^3[/tex]
Therefore the average electromagnetic energy density at that point
[tex]E_{avg}=2.34*10^{-13}J/m^3[/tex]
Help me please I don’t understand
Answer:
a. hydroelectric power plant
A gyroscope slows from an initial rate of 34 rad/s at a rate of 0.619 rad/s2. The angular displacement when it stops moving is _
Answer: [tex]933.76\ rad[/tex]
Explanation:
Given
The initial rate of gyroscope is [tex]\omega_o=34\ rad/s[/tex]
Angular deceleration [tex]\alpha =0.619\ rad/s^2[/tex]
Using angular equation of motion
[tex]\Rightarrow \omega^2-\omega_o^2=2\alpha \theta[/tex]
Insert the values
[tex]\Rightarrow 0-34^2=2(-0.619)\theta \\\\\Rightarrow \theta =\dfrac{34^2}{2\times 0.619}\\\\\Rightarrow \theta =933.76\ rad[/tex]
Thus, the angular displacement is [tex]933.76\ rad[/tex]
A closed loop conductor that forms a circle with a radius of 2.0 m is located in a uniform but changing magnetic field. If the maximum emf Induced in the loop is 5.0 V what is the maximum rate at which the magnetic field strength is changing if the magnetic field is oriented perpendicular to the plane in which the loop lies
Answer:
The maximum rate at which the magnetic field strength is changing if the magnetic field is oriented perpendicular to the plane in which the loop lies 0.398 T/s.
Explanation:
Given;
radius of the circular loop, r = 2.0 m
maximum induced emf, E = 5.0 V
The emf induced in a magnetic field is given as;
[tex]emf = \frac{d\phi}{dt} \\\\\phi = AB\\\\emf = A\frac{dB}{dt} \\\\\frac{dB}{dt} = \frac{emf}{A} \\\\where;\\A \ is \ the \ area \ circular \ l00p = \pi r^2 = \pi (2)^2 = 4\pi \ m^2\\\\\frac{dB}{dt} = \frac{5}{4\pi} \\\\\frac{dB}{dt} = 0.398 \ T/s[/tex]
Therefore, the maximum rate at which the magnetic field strength is changing if the magnetic field is oriented perpendicular to the plane in which the loop lies 0.398 T/s.
which statement describes the molecules and a reaction once it reaches equilibrium
A. They maintain stable concentrations
B. They stop moving
C. They consist mainly of reactant molecules
D. They react only if they are disturbed
Answer:
They maintain stable concentrations
Explanation:
Just took the test.
The statement describes the molecules and a reaction once it reaches equilibrium: they maintain stable concentrations, which is option A as the When a chemical reaction reaches equilibrium, the rate of the forward reaction is equal to the rate of the reverse reaction.
What is equilibrium?Equilibrium is a dynamic state, meaning that the reaction is still ongoing but the rates of the forward and reverse reactions are equal. This means that molecules are still reacting with each other, but at a constant rate, so that the concentrations of the reactants and products remain stable. When a reaction is not at equilibrium, the concentrations of the reactants and products change as the reaction progresses. However, once equilibrium is reached, the concentrations of the reactants and products no longer change, but the individual molecules are still moving and reacting with each other.
Hence, The statement describes the molecules and a reaction once it reaches equilibrium: they maintain stable concentrations, which is an option. A
Learn more about equilibrium here.
https://brainly.com/question/19324885
#SPJ5
You have two flashlights that have 0.500-A currents flowing through them. One flashlight has a single 1.50-V battery in its circuit, and the second flashlight has three 1.50-V batteries connected in a chain that provides 4.50 V. How much power is the battery in the first flashlight providing
Answer: 0.75 W
Explanation:
Given
Current flowing [tex]I=0.5\ A[/tex]
The first flashlight has a single 1.5 V battery
The second flashlight has three 1.5 V batteries connected to provide 4.5 V
Power is the product of voltage and current.
For the first flashlight
[tex]\Rightarrow P=1.5\times 0.5\\\Rightarrow P=0.75\ W[/tex]
Thus, the first flashlight providing 0.75 W of power.
A bullet with a mass of 12 g moving horizontally strikes a fixed block of wood and penetrates a distance of 5.2 cm. The speed of the bullet just before the collision is 640 m/s. What is the average force that the wood exerted on the bullet
Answer:
F = 47261.5 N = 47.26 KN
Explanation:
First, we will calculate the deceleration of the bullet by using the third equation of motion:
[tex]2as = v_f^2-v_i^2[/tex]
where,
a = deceleration = ?
s = distace covered = 5.2 cm = 0.052 m
vf = final speed = 0 m/s
vi = initial speed = 640 m/s
Therefore,
[tex]2(a)(0.052\ m) = (0\ m/s)^2-(640\ m/s)^2\\\\a = -\frac{409600\ m^2/s^2}{0.104\ m}\\\\a=-3938461.5\ m/s^2[/tex]
negative sign shows deceleration.
Now for the force, we will use Newton's Second Law of Motion:
F = ma
where,
F = Force = ?
m = mass of bullet = 12 g = 0.012 kg
Therefore,
F = (0.012 kg)(3938461.5 m/s²)
F = 47261.5 N = 47.26 KN
A sound wave with a frequency of 700 Hz and a wavelength of 5 m travels through a liquid. How fast does sound travel through the liquid?
A.
140 m/s
B.
0.007 m/s
C.
3500 mHz
D.
3500 m/s
What is the speed of a wave if it has a wavelength of
42 m and a frequency of 7 hertz?
Answer:
♕ [tex]\large{ \red{ \tt{Step - By - Step \: Explanation}}}[/tex]
☃ [tex] \underline{ \underline{ \blue{ \large{ \tt{G \: I \: V \: E\: N}}}}} : [/tex]
Frequency ( f ) = 7 HertzWavelength ( λ ) = 42m♨ [tex] \underline {\underline{ \orange{ \large{ \tt{T \: O \: \: F \: I \: N\: D}}}} }: [/tex]
Wave velocity ( v )☄ [tex]\underline{ \underline{ \large{ \pink{ \tt{S\: O \: L \: U \: T\: I \: O \: N}}}}}: [/tex]
✧ [tex] \red{ \boxed{ \large{ \purple{ \sf{Wave \: velocity(v) = Frequency(f) \times Wavelength(λ)}}}}}[/tex]
~Plug the known values and then multiply!
↦ [tex] \large{ \tt{7 \times 42}}[/tex]
↦ [tex] \boxed{ \boxed{ \large{ \bold{ \tt{294 \: m {s}^ {- 1} }}}}}[/tex]
☥ [tex] \large{ \boxed{ \boxed{ \large{ \tt{Our \: Final \: Answer : \underline{ \large{ \tt{294 \: m {s}^{ - 1}}}}}}}}} [/tex]
---------------------------------------------------------------
❁ [tex] \underline{ \large{ \red{ \tt{D\: E\: T \: A \: I \: L\: E \: D \: \: I\: N \: F \: O}}}} : [/tex]
Frequency ( f ) : The number of complete waves , set up in a medium in one second is called frequency of the wave. The SI unit of frequency is Hertz ( Hz ). For example : if a sound wave completes 15 compressions and 15 rarefactions in one second , it's frequency is 15 Hz.Wavelength ( λ ) : The distance between two consecutive troughs or crests in a transverse wave or the distance between two consecutive compressions or rarefactions in a longitudinal wave us called wavelength. It is the distance travelled by a wave in a time equal to it's time period. It's SI unit is metre ( m ).Wave velocity ( v ) : The velocity with which a wave propagates in a medium is called wave velocity. It's SI unit is m/s.# KILL : Excuses
KISS : Opportunities
MARRY : Goals
♪ Hope I helped! ♡
☂ Have a wonderful day / night ! ツ
✎ [tex] \underbrace{ \overbrace{ \mathfrak{Carry \: On \: Learning}}}[/tex] ✔
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
In the experiment, a meter is hooked up to a speaker to monitor the amplitude of the received sound. Suppose the background signal level is 13 mV, the signal is 91 mV with no attenuator and is 25 mV with an attenuator in place. Calculate pt/pi including the background correction.
Answer:
The answer is "[tex]15.38\%[/tex]"
Explanation:
Background[tex]= 13 \ mv\\\\[/tex]
corrected signal[tex]= 91 \ mv-13\ mv= 78\ mv\\\\[/tex]
with attenuator[tex]=25\ mv-13\ mv= 12\ mv\\\\[/tex]
[tex]\to \frac{p_t}{p_i}=\frac{12}{78}\times 100= 15.38\%[/tex]
A 17-mm-wide diffraction grating has rulings of 530 lines per millimeter. White light is incident normally on the grating. What is the longest wavelength that forms an intensity maximum in the fifth order
Answer:
377 nm
Explanation:
Number of lines per meter is, [tex]N &=530 \times 1000 \\ &=530000 \text { lines } / \mathrm{m} \end{aligned}[/tex]
Grating element is, [tex]d=\frac{1}{N}[/tex]
[tex]=1.8868 \times 10^{-6} \mathrm{~m}[tex]
Order is, n=5
Condition for maximum intensity is, [tex]d \sin \theta=n \lambda[/tex]
[tex]\lambda &=\frac{1.8868 \times 10^{-6}}{5(\sin 90)} \\ &=0.377 \times 10^{-6} \mathrm{~m} \\ &=377 \mathrm{~nm}[/tex]
what is the transfer of heat energy by direct contact. A . convection b. radiation c. thermal or heat and d. conduction
Answer:
d. conduction
Explanation:
Conduction involves the transfer of electric charge or thermal energy due to the movement of particles. When the conduction relates to electric charge, it is known as electrical conduction while when it relates to thermal energy, it is known as heat conduction.
In the process of heat conduction, thermal energy is usually transferred from fast moving particles to slow moving particles during the collision of these particles. Also, thermal energy is typically transferred between objects that has different degrees of temperature and materials (particles) that are directly in contact with each other but differ in their ability to accept or give up electrons.
Any material or object that allow the conduction (transfer) of electric charge or thermal energy is generally referred to as a conductor. Conductors include metal, steel, aluminum, copper, frying pan, pot, spoon etc.
In conclusion, conduction typically involves the transfer of heat energy by direct contact between two or more conductors such as a pot and electric cooker.
Answer:
d. conduction
Explanation:
Conduction is the transfer of energy from one molecule to another by direct contact.
ADHD is triggered ________ by genetic and neurological factors and ________ by social or environmental ones.
A. less; more
B. somewhat; somewhat
C. little; mostly
D. more; less
Answer:
D More: Less
Explanation:
ADHD is triggered more by genetic and neurological factors and less by social or environmental ones.
What is ADHD?ADHD is one of the most common neurodevelopmental disorders of childhood. It is usually first diagnosed in childhood and often lasts into adulthood. Children with ADHD may have trouble paying attention, controlling impulsive behaviors (may act without thinking about what the result will be), or be overly active.
Moreover, ADHD tends to run in families and, in most cases, it's thought the genes you inherit from your parents are a significant factor in developing the condition. Research shows that parents and siblings of someone with ADHD are more likely to have ADHD themselves.
Therefore, adults with attention deficit hyperactivity disorder (ADHD or ADD) lead anxious lives. The nature of ADHD often makes day-to-day life stressful, creating situations and environments fraught with uncertainty – anxiety's primary fuel.
Learn more about ADHD:
https://brainly.com/question/13719580
#SPJ2
A vertical spring with a spring constant of 450 N/m is mounted on the floor. From directly above the spring, which is unstrained, a 0.30-kg ball is dropped from rest. It collides with and sticks to the spring, which is compressed by 2.5 cm in bringing the block to a momentary halt. Assuming air resistance is negligible, from what height (in cm) above the uncompressed spring was the block dropped
Answer:
h = 1.91 m
Explanation:
From the law of conservation of energy, we know that:
[tex]Potential\ Energy\ of\ Ball = Elastic\ Petential\ Energy\ of\ Spring\\mgh = \frac{1}{2}kx^2[/tex]
where,
m = mass of ball = 0.3 kg
g = acceleration due to gravity = 9.81 m/s²
h = height of ball = ?
k = spring constant = 450 N/m
x = compressed length = 2.5 cm = 0.025 m
Therefore,
[tex](0.3\ kg)(9.81\ m/s^2)h = \frac{1}{2} (450\ N/m)(0.025\ m)^2\\\\h = \frac{(450\ N/m)(0.025\ m)^}{(2)(0.3\ kg)(9.81\ m/s^2)}[/tex]
h = 1.91 m
Copper zinc and magnesium do not contain any iron. What word is used to describe these types of
metals?
Answer:
Metals that do not contain traces or large proportions of iron in them are called Non-Ferrous metals.
At which of the following angles will the sunlight received at a location on Earth spread out over the largest area?
90°
70°
40°
10°
Will mark BRAINLIEST* don't answer just for points or u will be reported. thanks :)
Answer:
10 degrees
Explanation:
I took the test :D
An irrigation canal has a rectangular cross section. At one point where the canal is 18.2 m wide and the water is 3.55 m deep, the water flows at 2.55 cm/s . At a second point downstream, but on the same level, the canal is 16.3 m wide, but the water flows at 11.6 cm/s . How deep is the water at this point
Answer:
Explanation:
Rate of volume flow at two points will be same at two points .
A₁ V₁ = A₂V₂
A₁ and A₂ are area of cross section at two points and V₁ and V₂ are velocities .
A₁ = 18.2 x 3.55 = 64.61 m²
V₁ = 2 .55 x 10⁻² m/s
A₂ = 16.3 x d = 16.3 d m²
d is depth at second point .
V₂ = 11.6 x 10⁻² m/s
64.61 m² x 2 .55 x 10⁻² m/s = 16.3 d m² x 11.6 x 10⁻² m/s
d = .87 m
so canal is .87 m deep.
One thing you really notice is the complex, feathery, knotty structure of the gas and dust in our galaxy. If you look around, you can see a couple more objects that might be good candidates for being other galaxies with their own star-forming regions. What are these objects called
Answer:
Orion Nebula & cone nebula
Explanation:
From the huge, youthful stars that are forming the nebula to the pillars of thick gas that could be the homes of burgeoning stars, the Orion Nebula is a picture book of star formation. The four heaviest stars in the nebula reside in the bright central field. Since the stars are arranged in a trapezoid shape, they are known as the Trapezium.
These stars' ultraviolet radiation is cutting a hole in the nebula and stars that are already young enough to have disks of material encircling them can be seen near the Trapezium stars. Protoplanetary disks, also known as (proplyds) are too small to be seen distinctly and the disks are the foundation of solar systems.
The Cone Nebula is a monstrous creation, which resembles a nightmare beast flaring up from a crimson sea, is simply a benevolent pillar of gas and ashes. The Cone Nebula is so identified because it has a conical appearance in ground-based photographs. This massive pillar is located in a tumultuous star-forming area with gnarled mountainpeak of cold gas and dust is visible.
There are three 20.0 Ω resistors connected in series across a 120 V generator
Answer:
That is equal to R1 + R2. If three or more unequal (or equal) resistors are connected in series then the equivalent resistance is: R1 + R2 + R3 +…, etc. One important point to remember about resistors in series networks to check that your maths is correct.
A. Obtain the following: microwave, ruler, something meltable (e.g. candy bar, marshmallows) B. A microwave works by setting up a standing electromagnetic wave inside of a box made of conducting materials. What is the value of an electric field inside a conductor
Answer:
E = 124.7 N / C
Explanation:
Let's analyze the exercise: the microwave creates an electromagnetic wave of frequency F = 2.45 GHz, this wave is introduced into the microwave cavity and is reflected on the metal walls, which is why one or more standing waves are formed.
The electric field of the standing wave is
I = E²
E =√I
where I is the intensity of the radiation.
What is it
I = P / A
where P is the effective emission power, almost all the power of the microwave and A is the area of the cavity, in the most used microwaves
P = 700 W and the area is A = 25 x 18 cm² = 0.045 m²
I = 700 / 0.045
I = 15555.56 W/m²
let's calculate the electric field
E = √15555.56
E = 124.7 N / C
Two blocks are connected by a massless rope that passes over a 1 kg pulley with a radius of 12 cm. The rope moves over the pulley without slipping. The mass of block A is 2.1 kg and the mass of block B is 4.1 kg. Block A is also connected to a horizontally-mounted spring with a spring constant of 358 J/m2. What is the angular frequency (in rad/s) of oscillations of this system
Answer:
[tex]F=1.159[/tex]
Explanation:
From the question we are told that:
Mass of pulley [tex]M=1kg[/tex]
Radius [tex]r=12cm[/tex]
Mass of block A [tex]M_a=2.1kg[/tex]
Mass of block B [tex]m_b=4.1kg[/tex]
Spring constant[tex]\mu= 358 J/m2[/tex]
Generally the equation for Torque is mathematically given by
Since [tex]\sumF=ma[/tex]
At mass A
[tex]T_2-f_3=2.1a[/tex]
At mass B
[tex]4.8-T_1=4.1a[/tex]
At Pulley
[tex]R(T_1-T_2)=\frac{1*1*R^2}{2}\frac{a}{R}[/tex]
[tex]R(T_1-T_2)=0.55a[/tex]
Therefore the equation for total force F
At mass A+At mass B+At Pulley
[tex](T_2-f_3+4.8-T_1+R(T_1-T_2)=2.1a+4.1a+0.55a[/tex]
[tex](T_2-f_3+4.8-T_1+R(T_1-T_2)=2.7a+4.8a+0.55a[/tex]
[tex]-f_3+4.1=6.75a[/tex]
[tex]-f_3=6.75a+4.8[/tex]
Since From above equation
[tex]M_{eff}=6.7kg[/tex]
Therefore
[tex]T=2\pi \sqrt{{\frac{M_{eff}}{k}}[/tex]
[tex]T=2\pi \sqrt{{\frac{6.75}{\mu}}[/tex]
[tex]T=0.862s[/tex]
Generally the equation for frequency is mathematically given by
[tex]F=\frac{1}{T} \\F=\frac{1}{0.862}[/tex]
[tex]F=1.159[/tex]
Which of the following. Chemical represent the law of conservation of Matter?
Answer:
The answer is first one 1...
5. Stopping a fast-moving object is harder than stopping a slow-moving
one.
True
False
What is the flow rate of water in a pipe flowing full with an area of 0.3 m2 and velocity of 2.5 m/s?
Answer:
0.75 m³/s
Explanation:
Applying,
Q = vA.................... Equation 1
Where Q = flow rate of the water, v = velocity of the water, A = area of the pipe.
From the question,
Given: v = 2.5 m/s, A = 0.3 m²
Substitute these values into equation 1
Q = 2.5(0.3)
Q = 0.75 m³/s
Hence the flow rate of water in the pipe is 0.75 m³/s
WILL GIVE BRAINLIEST
Answer:
[tex]2\:\mathrm{m/s^2}[/tex]
From Newton's 2nd Law, we have [tex]\Sigma F=ma[/tex]. Substituting given values, we have:
[tex]40=20a,\\a=\frac{40}{20}=\boxed{2\:\mathrm{m/s^2}}[/tex]
A thermionic tube with only a cathode and anode is called
Answer:
the simplest vacuum tube, the diode
What is meant by electricity and magnetism
Electricity is just the flow of electrons or charges from a point of production through a conductor, to another point where it can be utilized or converted to another form of energy.
Magnetism is the force exerted by magnets when they attract or repel each other. Magnetism is caused by the motion of electric charges from two or more magnetic substances.
Answer:
By Electricity.. We mean the Flow of electrical power or Charge.
While Magnetism is a phenomenon that occurs from or by the Motion of Charges
Please helpppppppppp!!!!!!!!!!!
paano matutugunan o matutulungan ng pamahalaan at ng mga guro yubg mga estudyanteng nakararanas nag stress at anxiety.
Answer: how the government and teachers can address or help students experiencing stress and anxiety.
Explanation:
A system has both potential energy (PE) and kinetic energy (KE). According to
the law of conservation of energy, what can happen to the total energy of the
system?
Answer:
A. It must stay the same, but kinetic energy (KE) can be transformed to PE and PE can be transformed to KE within the system.
Explanation:
Energy can be defined as the ability (capacity) to do work. The two (2) main types of energy are;
a. Potential energy (PE): it is an energy possessed by an object or body due to its position above the earth.
b. Kinetic energy (KE): it is an energy possessed by an object or body due to its motion.
Furthermore, the total energy of a physical object or body is the sum of the potential energy and kinetic energy possessed by the object or body.
Mathematically, it is given by the formula;
Total energy = P.E + K.E
The Law of Conservation of Energy states that energy cannot be destroyed but can only be transformed or converted from one form to another.
In this scenario, a system has both potential energy (PE) and kinetic energy (KE).
According to the law of conservation of energy, we can infer or deduce that the total energy of the system must stay the same because it cannot be destroyed, but kinetic energy (KE) can be transformed to potential energy (PE) and potential energy (PE) can be transformed to kinetic energy (KE) within the system.
When was the most gravitational potential energy stored between the model and Earth? Assume that the model's mass did not change.
Answer:
As the ball falls from C to E, potential energy is converted to kinetic energy. The velocity of the ball increases as it falls, which means that the ball attains its greatest velocity, and thus its greatest kinetic energy
Explanation:
Answer:As the ball falls from C to E, potential energy is converted to kinetic energy. The velocity of the ball increases as it falls, which means that the ball attains its greatest velocity, and thus its greatest kinetic energy
Explanation:
Explain gravitational implicit energy in terms of work done against graveness.Show how knowledge of the implicit energy as a function of position can be used to simplify computations and explain physical marvels. Show that the gravitational potential energy of an object of mass m at height h on Earth is given by PEg=mgh.