Explanation:
Given:
m1 = 0.55 kg
m2 = 0.45 kg
vi1 = +5.8 m/a
vi2 = -3.9 m/a
Solve for V
m1vi1 + m2vi2 = (m1 + m2)V
(0.55 kg)(+5.8 m/s) + (0.45 kg)(-3.9 m/s) = (0.55 + 0.45)V
V = +1.46 m/a
This means that the combined mass after the collision is moving to the right at 1.46 m/s
Dos masas con valores de 8kg y 12kg cada una se encuentran separadas por una distancia de 1m. Determinar la fuerza de atraccion gravitacional entre ellas si se compara con el valor de sus pesos Como es este valor?
The question is: Two masses with values of 8kg and 12kg each are separated by a distance of 1m. Determine the force of gravitational attraction between them if compared with the value of their weights. What is this value?
Answer: The force of gravitational attraction between them if compared with the value of their weights is [tex]640.704 \times 10^{-11} N[/tex].
Explanation:
Given: [tex]m_{1}[/tex] = 8 kg, [tex]m_{2}[/tex] = 12 kg
Distance = 1 m
Formula used is as follows.
[tex]F = \frac{G \times m_{1} \times m_{2}}{r^{2}}[/tex]
where,
F = force of gravitational attraction
G = gravitational constant = [tex]6.674 \times 10^{-11} N m^{2}/kg^{2}[/tex]
[tex]m_{1}[/tex] = mass of object 1
[tex]m_{2}[/tex] = mass of object 2
r = distance between the centers of these two objects
Substitute the values into above formula as follows.
[tex]F = \frac{G \times m_{1} \times m_{2}}{r^{2}}\\= \frac{6.674 \times 10^{-11} Nm^{2}/kg^{2} \times 8 kg \times 12 kg}{(1 m)^{2}}\\= 640.704 \times 10^{-11} N[/tex]
Thus, we can conclude that the force of gravitational attraction between them if compared with the value of their weights is [tex]640.704 \times 10^{-11} N[/tex].
A wave is moving at the rate of 40 cm/s. Its wavelength is 5 cm. What is the frequency of the wave? INCLUDE THE CORRECT UNIT!
Answer:
Solution given:
velocity=40cm/s
wave length=5cm
we have
frequency =velocity/wavelength=40/5=8hertz.
the frequency of the wave is 8 hertz.
on each other for Animals and plants in a food web are survival. A. dependent B. suspending C. superintendent D. interdependent Reset Selection
please help
A. dependent
This is the answer
Answer:
cant see the question to small
Explanation:
Two resistors, one with 7.00 Ω of resistance and the other with 11.00 Ω of resistance, are connected in series to a 9.00 V battery. How much power is dissipated by these two resistors?
Answer:
4.5 W
Explanation:
Applying,
P = V²/(R₁+R₂).................. Equation 1
Where P = Power, V = Voltage, R₁ and R₂ = values of the two resistor.
From the question,
Given: V = 9.00 V, R₁ = 7.00 Ω, R₂ = 11.00 Ω
Substitute these values into equation 1
P = 9²/(7+11)
P = 81/(18)
P = 4.5 Watt.
Hence the power dessipated by the two resistors is 4.5 watt
12. You and a friend are playing a game of basketball. Explain why the
basketball appears orange, be sure to use terms reflected and absorbed
in your answer. [4]
Help me plssss I’m giving out brainlest and 10 points
Answer:
If the basket ball appears orange then it can be said that it reflects orange light
Explanation:
The color of the object reflected by an object is the color which is viewed by a viewer. Hence, if the basket ball reflects the orange color light , then the ball will appear orange in color to the viewer.
The light absorbed by the object has no role in deciding the color of the object visible to a viewer.
hence, if the basket ball appears orange then it can be said that it reflects orange light.
if a wave has a velocity of 200 m/s and a wavelength of 4 m what is the frequency of the wave?
Some liquid is poured into a burette so that it reads 14cm³.50 drops were run each of volume 0.1cm³ What is the volume of the 50 drops. (4marks)
Answer:
V = 5 cm³
Explanation:
In this exercise the volume (Vo = 0.1 cm³) of each drop is indicated, requesting the volume of 50 drops
V = V₀ #_drops
V = 0.1 50
V = 5 cm³
Answer:
[tex]V_{50}=5cm^3[/tex]
Explanation:
From the question we are told that:
Volume of liquid in burette [tex]V_b=14cm^3[/tex]
Volume of drop of liquid [tex]V_d=0.1cm^3[/tex]
Number of drops [tex]n=50[/tex]
Generally the equation for volume of 50 drops V_{50} is mathematically given by
[tex]V_{50}=V_d*n[/tex]
[tex]V_{50}=0.1*50[/tex]
[tex]V_{50}=5cm^3[/tex]
Therefore the volume of the 50 drops
[tex]V_{50}=5cm^3[/tex]
A worker leaves home at 9:00 AM, travels 40 km to the office, and then returns home at 5:00 PM. What is the magnitude of the worker's displacement during this 8-hour span of time?
Answer:
The answer is 0km
Explanation:
Two vehicles A and B accelerate uniformly from rest.
Vehicle A attains a maximum velocity of 30ms - in los
while B attains a maximum velocil) ol 40ms in the same
time. Both vehicles maintain these velocities for 6s belore
they are decelerated to rest in 6s and 4s respectively
Sketch on the same axes, velocity time graphs
for the motion of the vehicles
Calculate the velocity of each vehicle 18s aftur
the start. (VA
= 20ms -land vs
and vs = 20ms-')
How far will the two vehicles be from one
another during the moment in (ii) above?
(SA = 380m and SB
= 500m: SAB
120m). plz help
Answer:
(i) Please find attached the required velocity time graphs plotted with MS Excel
(ii) The velocity of vehicle A at the 18th second = 20 m/s
The velocity of vehicle B at the 18th second = 0 m/s
(iii) The distance between the two vehicles at the moment in (ii) above is 60 meters
Explanation:
The given parameters of the motion of vehicles A and B are;
The acceleration of vehicles A and B = Uniform acceleration starting from rest
The maximum velocity attained by vehicle A = 30 m/s
The time it takes vehicle A to attain maximum velocity = 10 s
The maximum velocity attained by vehicle B = 30 m/s
The time it takes vehicle B to attain maximum velocity = The time it takes vehicle A to attain maximum velocity = 10 s
The time duration vehicle A maintains its maximum velocity = 6 s
The time duration vehicle B maintains its maximum velocity = 4 s
(i) From the question, we get the following table;
[tex]\begin{array}{ccc}Time &V_A&V_B\\0&0&0\\10&30&40\\14&30&40\\16&30&20\\18&20&0\\22&0&\end{array}[/tex]
From the above table the velocity time graphs of vehicles A and B is created with MS Excel and can included here
(ii) The velocity of vehicle A at the start = 0 m/s
After accelerating for 10 seconds, the velocity of vehicle A = The maximum velocity of vehicle A = 30 m/s
The maximum velocity is maintained for 6 seconds which gives;
At 10 s + 6 s = 16 s, the velocity of vehicle A = 30 m/s
The time it takes vehicle A to decelerate to rest = 6 s
The deceleration of vehicle A, [tex]a_A[/tex] = (30 m/s - 0 m/s)/(6 s) = 5 m/s²
Therefore, we get;
v = u - [tex]a_A[/tex]·t
At the 18th second, the deceleration time, t = 18 s - 16 s = 2 s
u = 30 m/s
∴ v₁₈ = 30 - 5 × 2 = 20
The velocity of vehicle A at the 18th second, [tex]V_{18A}[/tex] = 20 m/s
For vehicle B, we have;
At the 14th second, the velocity of vehicle B = 40 m/s
Vehicle B decelerates to rest in, t = 4 s
The deceleration of vehicle B, [tex]a_B[/tex] = (40 m/s - 0 m/s)/(4 s) = 10 m/s²
For vehicle B, at the 18th second, t = 18 s - 14 s = 4 s
∴ [tex]v_{18B}[/tex] = 40 m/s - 10 m/s² × 4 s = 0 m/s
The velocity of the vehicle B at 18th second, [tex]v_{18B}[/tex] = 0 m/s
(iii) The distance covered by vehicle A up to the 18th second is given by the area under the velocity-time graph as follows;
The area triangle A₁ = (1/2) × 10 × 30 = 150
Area of rectangle, A₂ = 6 × 30 = 180
Area of trapezoid, A₃ = (1/2) × (30 + 20) × 2 = 50
The distance covered in the 18th second by vehicle [tex]S_A[/tex] = A₁ + A₂ + A₃
∴ [tex]S_A[/tex] = 150 + 180 + 50 = 380
The distance covered in the 18th second by vehicle [tex]S_A[/tex] = 380 m
The distance covered by the vehicle B in the 18th second is given by the area under the velocity time graph of vehicle B as follows;
Area of trapezoid, A₅ = (1/2) × (18 + 4) × 40 = 440
The distance covered by the trapezoid, [tex]S_B[/tex] = 440 m
The distance of the two vehicles apart at the 18t second, [tex]S_{AB}[/tex] = [tex]S_B[/tex] - [tex]S_A[/tex]
∴ [tex]S_{AB}[/tex] = 440 m - 380 m = 60 m
The distance of the two vehicles from one another at the 18th second, [tex]S_{AB}[/tex] = 60 m.
Question 1 (1 point)
All solid objects will deform when enough force is applied.
O True
False
Answer:
Solid objects will deform when adequate loads are applied to them; if the material is elastic, the object will return to its initial shape and size after removal. This is in contrast to plasticity, in which the object fails to do so and instead remains in its deformed state.
Explanation:
Answer:
It is false
Explanation:
because when it like a rolling ball it can deform no matter what unlesss you throw it at the ground really hard then it breaks but a soft or sometimes metal yeah it can deform but not all things solid deform.
1. What are the two main gases responsible for lowering down the pH.
2. Can we control an acid rain? Why or Why not?
3. When pH changes from 6 to 3, how many times does acidity increase?
Answer:
1. The three main acidic gases responsible for lowering the pH of rainwater are non-metal oxides produced by the burning of fossil fuels like coal, oil and natural gas. Sulfur dioxide is produced when fossil fuels containing sulfur impurities are burned.
2. A great way to reduce acid rain is to produce energy without using fossil fuels. Instead, people can use renewable energy sources, such as solar and wind power. Renewable energy sources help reduce acid rain because they produce much less pollution.
3. The pH scale is logarithmic, meaning that an increase or decrease of an integer value changes the concentration by a tenfold. For example, a pH of 3 is ten times more acidic than a pH of 4.
3. Which of the following statements about a scientific theory is wrong?
What are the following statements?
Below is a single strand of DNA, what is the complementary base pair for the strand?
AAG, GCA, TCA, GAT
What could it be.... (science)
Answer:
eeeeeeeeeeeeeeeeeeeeeeeeeee
What is the efficiency of a car's engine when heat input is 400,000 joules and
the waste heat is 300,000 joules?
O A. 25%
B. 35%
O C. 75%
D. 85%
Answer: A. 25%
Explanation: Ap3x
How many valence electrons does the hydrogen and oxygen have in the following picture?
Answer:
can u make the picture less blurry pls
Explanation:
Developing a Strategy
Now that you have an obstacle in mind, take another few minutes and think about which success strategy might best help you overcome this obstacle. Write this strategy in the box below:
Explanation:
Look at your resources around you, find ways to cope with the situation.
Look at your environment or what is there around you that can help you.
Is there anyone that can help you.
Think more.
Try thinking outside of the box
Don't be logical
I wasn't sure if you meant this mentally or physically.
define gravitational field intensity?
Explanation:
The strength of the gravitational field is known as gravitational field intensity. It is the gravitational force acting on a unit test mass.
why are dams have broader walls at the bottom?
how long is it estimated that it will take for ods to leave the atmosphere?
A. 100 years
B. 60 years
C. 10 years
D. 30 years
Ods are predicted to disappear from the atmosphere in 10 years. So, the correct option is C.
What is Atmosphere?A layer (or layers) of gases that surround a planet and are held together by the gravitation of the planetary body is known as an atmosphere. Whenever the gravity is strong as well as the atmospheric temperature is low, a planet preserves its atmosphere. The five separate layers of the atmosphere are a result of the temperature variations that occur with height.
The layer of gases that covers Earth and contains the air we breathe is known as an atmosphere. The gravitational pull of the planet's neighbor, Earth, keeps it close to the surface. To gauge air pressure, use a barometer. The three primary components of the atmosphere are nitrogen, oxygen, and argon.
Therefore, the correct option is C.
Learn more about Atmosphere, here:
https://brainly.com/question/25881294
#SPJ3
Can sugar molecules produced from photosynthesis be rearranged into different compounds carry out life process
Answer:
Yes, the sugar molecules produced from photosynthesis can be rearranged into different compounds to carry out life processes such energy producing compounds, energy storage compounds, body building compounds, and compounds of other types of food
Explanation:
a) The sugar can be broken down in a plant cell to produce ATP and then energy through cellular respiration as follows;
C₆H₁₂O₆ + O₂ 6CO₂ + 6H₂O + ATP
The produced energy can be used as power for cellular activities, such as the synthesis of protein and cell division
b) The produced sugar can be linked together by enzymes to form starch which is a form of chemical storage of energy as follows;
Sugar C₆H₁₂O₆ transformed into starch (C₆H₁₀O₅)ₙ
c) The sugar can be used in building the plant body by forming cellulose which is a form of starch
d) The sugar can be transformed into proteins and fat which are other types of food such as compounds containing sugar produces compounds containing fat based compounds
The graphic organizer compares energy transfer in two layers of the sun.
Which labels belong in the regions marked X and Y?
A)
X: Absorbs energy from the core
Y: Takes longer for photons to move through
B)
X: Releases energy to the photosphere
Y: Takes longer for photons to move through
C)
X: Takes longer for photons to move through
Y: Absorbs energy from the core
D)
X: Takes longer for photons to move through
Y: Releases energy to the photosphere
Answer:
B
Explanation:
Got it right
Answer:
B. X: Releases energy to the photosphere
Y: Takes longer for photons to move through
Explanation:
Right on ED2021, goodluck!
Pravat exerts a force of 30 N to lift a bag of groceries 0.5 m. How much work did Pravat do on the bag?
Answer:
15 J
Explanation:
Work = Force x Distance
15= 30 x 0.5
Have a blessed day!
Answer:Pravat did 15 J of work
Explanation:
14 What is the weight of each of
the following masses on Eth?
a) 2 kg
b) 3.5kg
c) 5.25 kg
Newton’s
Explanation:
On earth,
g=10 m/s^2
When M=2 kg,
weight on earth=2×10
=20N
When M=3.5 kg,
weight on Earth=3.5×10
=35N
When M=5kg,
weight on Earth=5.25×10
=52.5N
define improved chulo advantages
Answer:
The benefits of the improved chulha is to reduce fuel consumption leading to saving in fuel wood. It reduces the smoke so the women can save time & saving in time leading to more economic activity, employment generation, etc.
Explanation:
The benefits of the improved chulha is to reduce fuel consumption leading to saving in fuel wood. It reduces the smoke so the women can save time & saving in time leading to more economic activity, employment generation, etc.
The SI unit for pressure is the
Answer:
The SI unit of pressure is Pascal .
Which scenario BEST describes an action-reaction pair? *
O A. A person pushes a cart and it rolls forward.
O B. A skateboarder pushes against the ground so she can move forward.
O C. An acrobat jumps on a trampoline and the trampoline moves downwards.
Both A and C
Answer:
C. An acrobat jumps on a trampoline and the trampoline moves downwards.
Both A and C
[tex] - trixiejane[/tex]
A student is holding a marble in his hand. What are the equal and opposite forces that are acting on it?
Answer:
Gravity and his hand
Explanation:
What is the electric field strenght in units of N/C if the flux through a 2.0m by 1.0m rectangular surface is 396Nm2/C, if the electric field is uniform, and if the plane of the surface is at an angle of π/3 radians with respect to the direction of the field ?
Answer:
The appropriate answer is "396 N/C".
Explanation:
The give values are:
Rectangular surface,
[tex]\Phi_e=396 \ N.m^2/C[/tex]
[tex]a = 2 \ m[/tex]
[tex]b = 1 \ m[/tex]
Angle,
[tex]\theta =\frac{\pi}{3} \ radian[/tex]
Now,
The area of rectangle (A) will be:
= [tex]a\times b[/tex]
= [tex]2\times 1[/tex]
= [tex]2 \ m^2[/tex]
hence,
The electric field strength will be:
⇒ [tex]\Phi_e=E.A Cos \theta[/tex]
or,
⇒ [tex]E=\frac{\Phi_e}{ACos \theta}[/tex]
On putting the given values, we get
⇒ [tex]=\frac{396}{2\times Cos(\frac{\pi}{3} )}[/tex]
⇒ [tex]=\frac{396}{2\times 0.5}[/tex]
⇒ [tex]=\frac{396}{1}[/tex]
⇒ [tex]=396 \ N/C[/tex]
which of the following best describes the function of a resistor in an electrical circuit?
Answer:
It controls the amount of current.
Explanation:
A resistor helps control and maintain the circuit which is it's main function.