An airplane is flying at a velocity of 79 m/s eastward relative to the air. Due to a high-pressure region to the north, the velocity of the air relative to the ground is 18 m/s southward. Find the ground speed of the airplane.

Answers

Answer 1
So we are working out it’s final velocity. To do this you need to rearrange and substitute :
Velocity = final velocity (v) - initial vel. (U)
Divided by ______________________
Time taken (t)

Not sure if this helped but I try to start it off

Related Questions

The diagram below represents an electromagnetic wave. Please Help

Answers

Answer:

I'm pretty sure it's A

Explanation:

bc the crest is is the point on the wave

Imagine you are outside playing with a dog. The dog runs back and forth, left to right. What is the best way to describe how fast the dog's motion is?

The direction the dog moves.

The distance the dog moves over a certain amount of time.

The distance the dog moves.

Answers

Answer:

It is B.

Explanation:

This is because you want to see how fast the dog moves and the best way to find out is by seeing how fast it moves in a certain amount of time. pls brainly!

The correct answer is B

rt A How much work does the electric motor of a Van de Graaff generator do to lift a positive ion (q=e) if the potential of the spherical electrode is 2.0 MV ?

Answers

Answer:

W = 2.0 MeV = 3.2*10⁻¹³ J

Explanation:

Assuming that the ion is located originally at a point where the electrostatic potential is zero, the change in energy of the ion is just the change in electrostatic potential times the charge of the ion, as follows:

        [tex]\Delta E = e*V = 1.6e-19 C * 2.0e6 V = 2.0 MeV = 3.2e-13 J[/tex]

This change in energy, assuming no friction present, must be equal to the work done by the motor on the ion:

        W = 2.0 MeV = 3.2*10⁻¹³ J.

A hammer drives a nail into a piece of wood. Which of the following correctly
identifies the pair of equal and opposite forces involved.
A. The hammer exerts a force on the nail: the nail exerts a force on the wood
B. The hammer exerts a force on the nail: the wood exerts a force on the nail.
C. The nail exerts a force on the hammer: the hammer exerts a force on the wood.
D. The hammer exerts a force on the nail: the nail exerts a force on the hammer.

Answers

Answer:

D

Explanation:

The statement which correctly describes the pair of equal and opposite forces involved is that the hammer exerts a force on the nail: the nail exerts a force on the hammer. Thus, the correct option for this question is D.

What is Force?

Force may be defined as the process that significantly involves the pulling and pushing of an object with mass which stimulates itself to change its velocity accordingly. It is a type of vector quantity because it has both magnitude and direction.

According to Newton's third law of motion, if object A exerts a force on object B, then object B must significantly exert a force of equal magnitude and opposite direction on object A. Here, object A is a hammer, and object B is a nail.

Therefore, the hammer exerts a force on the nail: the nail exerts a force on the hammer is the statement that correctly describes the pair of equal and opposite forces. Thus, the correct option for this question is D.

To learn more about Newton's third law of motion, refer to the link:

https://brainly.com/question/25998091

#SPJ2

Which of the following would increase the gravitational force between the Earth and the Moon the most?
A- Double the Mass of the Earth
B- Double the Mass of the Moon
C- Cut the distance between the Earth and Moon in half
D- None of the above

Answers

Answer:

i think C is the answer

Explanation:

The gravitational force between the Earth and Moon will increase by cutting the distance between the Earth and Moon in half. Hence, option (C) is correct.

The given problem is based on the concept of gravitational force. The force of attraction between the two massive bodies in a space is known as the gravitational force. Let us consider the mass of Earth and moon as M and m such that the gravitational force between each is,

[tex]F = \dfrac{G \times M \times m}{R^{2}}[/tex]

Here,

G is the universal gravitational constant.

R is the distance between the Earth and Moon.

Clearly, the forces between the Earth and Moon varies directly with the masses of Earth and Moon and inversely with the distance between the Earth and Moon. Since, masses are the constant parameters, hence reducing the distance will increase the gravitational force.

Thus, we can conclude that the gravitational force between the Earth and Moon will increase by cutting the distance between the Earth and Moon in half. Hence, option (C) is correct.

Learn more about the Gravitational force here:

https://brainly.com/question/24783651

a hole is punched at a height h in the side of a container of height h0. The container is full of water. If the water is to shoot as far as possible horizontally, (a) how far from the bottom of the container should the hole be punched? (b) Neglecting frictional losses, how far (initially) from the side of the container will the water land?​

Answers

a) the hole needs to be as close to the bottom as possible for maximum horizontal projection.

b) not sure there is enough information to answer that. It depends where the hole is.

You walk 8 blocks West, 2 blocks South, 9 blocks East, 3 blocks North, 4 blocks South. What
is the displacement between your starting and endpoints? What is the angle of displacement?
someone pls help me it’s important and i don’t know how to answer it!!

Answers

Answer:

...............,........................

Click to review the online content. Then answer the question(s) below, using complete sentences. Scroll down to view additional questions.
Online Content: Site 1

How do wetlands reduce flooding and erosion? (Site 1)

Answers

Answer:

Wetlands reduce flooding and erosion by filtering water.

Explanation:

Answer:

Wetlands reduce flooding and erosion by filtering water.

Explanation:

Suppose Tom Harmon17 is standing at the exact center of the Ohio State football field18 on the 50 yard line. The field is 300 feet long and 160 feet wide. Suppose the ball leaves Harmon’s hand at a height of six feet and has initial velocity v(0) = 40i + 39j + 32k feet per second where j points toward the sideline, i points toward the end zone, and k = i × j points straight up. The acceleration due to gravity is −32k feet per second squared and the mass of the football is .45 kilograms.
(a) Determine a parameterization for the position of the football at time t seconds after it is thrown.
(b) Suppose David Nelson19 catches the ball when it is six feet above the ground. Is Nelson in bounds or out of bounds when he catches the ball? (Assume Nelson’s toes are touching the ground directly below the ball when he catches the ball.)'

Answers

Answer:

a) x = 40 t , y = 39 t ,  z = 6 + 32 t - 16 t ²,   b)     x = 80 feet ,  y = 78 feet , the ball came into the field  

Explanation:

a) This is a projectile launch exercise, where in the x and y axes there is no acceleration and in the z axis the acceleration of the acceleration of gravity, let's write the equations of motion in each axis

Since the cast is in the center of the field, let's place the coordinate system

          x₀ = 0

          y₀ = 0

          z₀ = 6 feet

x-axis (towards end zone,  GOAL zone)

         x = xo + v₀ₓ t

        x = 40 t

y-axis (field width)

        y = y₀ + [tex]v_{oy}[/tex] t

        y = 39 t

z axis (vertical)

        z = z₀ + v_{oz} t - ½ g t²

        z = 6 + 32 t - ½ 32 t²

        z = 6 + 32 t - 16 t ²

b) The player catches the ball at the same height as it came out, so we can find the time it takes to arrive

          z = 6

          6 = 6 + 32 t - 16 t²

          (t - 2)t  = 0

           t=0 s

           t= 2 s

The ball position

          x = 40 2

          x = 80 feet

           

          y = 39 2

          y = 78 feet

the dimensions of the field from the coordinate system (center of the field) are

             x_total = 150 feet

             y _total = 80 feet

so we can see that the ball came into the field

When does a scatter plot show a correlation?

Answers

Answer:The closer the data points come when plotted to make a straight line, the higher correlation between the two variables , or the stronger the relationship.If the data points make a straight line, going from the origin out to the high x- and y- values the the variables are said to have a positive correlation.

Answer:

Mark brainliest please

Explanation:

If the data points make a straight line going from the origin out to high x- and y-values, then the variables are said to have a positive correlation .When there is no clear relationship between the two variables, we say there is no correlation between the two variables.

Suppose that a Ferrari and a Porsche begin a race with a moving start, and each moves with constant speed. One lap of the track is 2 km. The Ferrari laps the Porsche after the Porsche has completed 9 laps. If the speed of the Ferrari had been 10 km/h less, the Porsche would have traveled 18 laps before being overtaken. What were the speeds of the two cars?

Answers

Answer:

Porsche = 180 kmph

Ferrari = 200 kmph

Explanation:

Given that

The distance of one lap = 2 km

The distance the Ferrari laps the Porsche = 9 laps

The distance the Ferrari will lap the Porsche with 10 km/h less speed = 18 laps

So we say let,

the speed of the Ferrari = S(f),

the speed of the Porsche = S(p), and

the time that lapse before two cars lapped = t

From the question, we're told that

(S(f) * t1) - (S(p) * t1) = 2 km, also

S(p) * t1 = 9 * 2 = 18 km

Referring back to the initial equation

(S(f) * t1) = 2 + (S(p) * t1)

(S(f) * t1) = 2 + 18 = 20 km

Going back to the question again, we're told that

(S(f) - 10) * t₂ - S(p) * t₂ = 2 km

S(p) * t₂ = 18 * 2 = 36 km

So that,

(S(f) - 10) * t₂ = 2 km + S(p) * t₂

(S(f) - 10) * t₂ = 2 + 36 km = 38 km

(S(f) - 10) * t₂ = 38 km

S(p) * t₂ (36 km) = 2 * S(p) * t₁ (18 km),

S(p) * t₂ = 2 * S(p) * t₁, collect like terms

t₂ = 2t₁

(S(f) - 10) * 2t₁ - S(p) * 2t₁ = 2 km

(S(f) - 10) * 2t₁ = 38 km

(S(f) - 10) * 2t₁ = 38 km

2t₁ * S(f) - 2t₁ * 10 = 38 km

S(f) * t₁ = 20 km,

2 * 20 km - 2t₁ * 10 = 38 km

2t₁ * 10 = 2 * 20 km - 38 km

2t₁ * 10 = 2 km

20t₁ = 2 km

t₁ = 2/20 = 0.1 hour = 6 minutes

This means that

S(p) * t₁ = 18 km

S(p) * 0.1 h = 18 km

S(p) = 18 km/0.1 h = 180 km/h

The speed of the Porsche = S = 180 km/h

S(f) * t₁ = 20 km

S(f) × 0.1 h = 20 km

S(f) = 20 km/0.1 h = 200 km/h

The speed of the Ferrari = S = 200 km/h

Can someone please answer this ​

Answers

Answer:

-) It is less than 8 [N]

See the explanation below.

Explanation:

To solve this problem we must analyze each of the answers, and in this way, we will come to the right solution. The most important thing is to keep in mind that the body is moving to the left.

-) It is equal to 8 [N]

This answer is not possible, since if the Force F was equal to 8 [N] the body would be in equilibrium and the body would not move.

-)  It is equal to 10 [N]

This answer is not possible, since if Force F is greater than 8 [N] the body would move to the right.

-)  It is greater than 10 [N]

This answer is not possible, since if Force F is greater than 8 [N] the body would move to the right.

-) It is less than 8 [N]

This is the correct option, as the force of 8 [N] will move the body to the left.

Vaccinations _____.

always prevent disease
never cause side effects
provide artificial immunity
are rarely given more than once

Answers

Provide artificial immunity

The particle model shows the image of the moving object.


TRUE OR FALSE


ANSWER AND I WILL GIVE YOU BRAINILIEST

Answers

Answer:

it does show the objects position

Nora notices water droplets on the grass in the morning. It did not rain during the night. Which statement is true about this change of state?


Mass was added to the water particles, resulting in deposition.
Energy was added to the water particles, resulting in evaporation.
Mass was removed from the water particles, resulting in sublimation.
Energy was removed from the water particles, resulting in condensation.

Answers

Answer:

Mass was added to the water particles, resulting in deposition.

Explanation:

Answer:  The energy was removed from the water particles resulting in condensation

Explanation Think about when you leave a cup of ice of and after a while you see water droplets thats what happened to the grass in the morning and thats called condensation.

e. A driver speeds up his vehicle while moving up a hill.
Why?​

Answers

Answer:

For more acceleration

Explanation:

If he is speeding u a hill his car needs more power ecsue its going upward so he will have to speeed to gain more acceleration so his car doesnt fall

HELP!
Which process of heat transfer makes milk boil?

Answers

Answer:

milk is raised to a certain level for sometimes and immediately cooled to the lower degree

2.9030 cm has 4 significant digits.
TRUE OR FALSE

Answers

Answer: false

Explanation:

8. A dog runs with an initial speed of 7.5 m/s on a waxed floor. It slides to a stop in 15 sec. What
is the acceleration?
(10 Points)
O-7.5 m/s
-0.5 m/s2
O -7.5 m/s2
7.5 mi/hr

Answers

Answer:

-0.5 m/s²

Explanation:

Step 1: Given data

Initial velocity of the dog (u): 7.5 m/sFinal velocity of the dog (v): 0 m/s (Stop)Time elapsed (t): 15 s

Step 2: Calculate the acceleration of the dog

The acceleration (a) is equal to the change in the velocity over the time elapsed.

a = v - u / t

a = 0 m/s - 7.5 m/s / 15 s

a = -0.5 m/s²

How would natural cycles (day/night, moon phases) change if gravity did not
exist?

Answers

Answer: Eh, we would be dead...

Explanation: First off, the moon is orbiting us for one reason, gravity. and if the switch for gravity just flicked off, poof! The moon would be speeding away at 1,000-2,000 hours! And the reason that we orbit the sun is gravity too. So every planet would fling into space. Everything in the UNIVERSE would fling into space. That much flying debris would eventually smash into earth. Well, if we did survive that, then we would freeze instantly because when we travel too far away from the star that we orbit, the planet would become very life-threateningly cold. And in this case, we are traveling away from the sun, which is the star we orbit. If we still manage to survive THAT, then we...would actually die from the start, cuz what holds our planet together? You guessed it-gravity.

5. Why should the free ends of a conduction tester not be connected for a long
time?​

Answers

If the free ends of conduction tester are connected for long time , The cell of the battery will drain very quickly

How is a responding variable different from a manipulated variable?
A. When a responding variable changes, it causes the manipulated
variable to change.
B. A responding variable changes as a result of changes made to the
manipulated variable.
C. When a responding variable stays the same, the manipulated
variable changes.
O D. A responding variable changes, but a manipulated variable stays
the same.

Answers

Answer:

B. A responding variable changes as a result of changes made to the

manipulated variable.

Explanation:

A responding variable is different from a manipulated variable because a responding variable keeps on changing, but a manipulated variable stays the same. Thus, the correct option is D.

What are responding variable and manipulated variable?

A variable is any characteristic, number, or quantity which can be measured or counted easily. A variable may also be called as an item. Age, sex, business income and expenses, country of birth, capital expenditure, class grades, eye color and vehicle type all are the example of variables.

Manipulated Variable are those variables which is changed by the scientist and are called as the controlled variable. Responding Variable is the variable that might change on its own because of what the scientist changes in the experimental study.

Therefore, the correct option is D.

Learn more about Variable here:

https://brainly.com/question/15740935

#SPJ2

Describe two similarities and two differences between electric and magnetic field lines. (Consider such things as where they originate and terminate, how they are related to the direction and strength of the field, whether they are closed curves or lines, and whether there's anything you can say about their flux through a closed surface.). Others

Answers

Answer:

Please see below as the answer is self- explanatory.

Explanation:

Similarities:The field vector is tangent to the field lines at any point of the trajectory.The density of field lines is proportional to the strength of the field.Differences:Electrostatic Field lines originate in charge distributions of positive charges and end in charge distributions of negative charges.Magnetic Field lines are closed lines, due to there are no isolated magnetic charges discovered yet.Electrostatic Field lines have the direction of the trajectory taken by a positive test charge.Magnetic Field lines have the direction defined by right-hand rule.Vector net flux of electrostatic field lines through a closed surface is equal to the net charge enclosed by the surface.Vector net flux of magnetic field lines through a closed surface is always zero.

Similarities

Field vectorDensity of field lines

Differences

Dispersions of positive charges .No separated attractive charges.

Electric and Magnetic field lines.

Similarities:

The field vector is tangent to the field lines at any point of the trajectory. The density of field lines is relative to the quality of the field.

Differences:

Electrostatic Field lines begin in charge dispersions of positive charges and conclusion in charge dispersions of negative charges.

Magnetic Field lines are closed lines, due to there are no separated attractive charges found yet.

Learn more about "Magnetic Lines":

https://brainly.com/question/17012638?referrer=searchResults

Social science is a branch of science that deals with the nature of
A. human society
B. the physical world
C. animal societies
D. the medical field

Answers

The answer is A. Human Society.

Answer:

A. human society

Explanation:

A metal wire has a circular cross section with radius 0.800 mm. You measure the resistivity of the wire in the following way: you connect one end of the wire to one terminal of a battery that has emf 12.0 V and negligible internal resistance. To the other terminal of the battery you connect a point along the wire so that the length of wire between the battery terminals is d. You measure the current in the wire as a function of d. The currents are small, so the temperature change of the wire is very small. You plot your results as I versus 1/d and find that the data lie close to a straight line that has slope 600 A⋅m.

Required:
What is the resistivity of the material of which the wire is made?

Answers

Answer:

The value is   [tex]\rho  =  4.02 *10^{-8} \  \Omega \cdot m[/tex]

Explanation:

From the question we are told that

   The radius is  [tex]r =   0.800 mm = 0.0008 \ m[/tex]

   The voltage of the battery is  [tex]emf  =  12.0 V[/tex]

    The slope is  [tex]s =  600 \ A \cdot m[/tex]

Generally the resistance is mathematically represented as

     [tex]R  =  \frac{\rho *  d }{A }[/tex]

Generally the current is mathematically represented as

      [tex]I = \frac{V}{R}[/tex]

=>    [tex]I = \frac{V}{\frac{\rho *  d }{A }}[/tex]

=>   [tex]I  =  \frac{V *  A }{\rho}  *  \frac{1}{d}[/tex]

Comparing this equation to that of a straight line we see that the slope is  

      [tex]s =  \frac{V *  A }{\rho}[/tex]

So    [tex] 600  =  \frac{V *  A }{\rho}[/tex]

Here A is the cross-sectional  area of the wire which is mathematically represented as

        [tex]A =  \pi r^2[/tex]

=>       [tex]A =  3.142 *   (0.0008 )^2[/tex]

=>       [tex]A =  2.011*10^{-6} \ m^2[/tex]    

So

     [tex] 600  =  \frac{12.0 *  (2.011*10^{-6}) }{\rho}[/tex]

=>   [tex]\rho  =  \frac{12 * 2.011*10^{-6} }{600}[/tex]

=>  [tex]\rho  =  4.02 *10^{-8} \  \Omega \cdot m[/tex]

 

   

which graph best demonstrates the general relationship between mass and temperature similar to the trend of thermal energy absorbed by your sand and water samples

Answers

Answer: the first one

Explanation: got it right on edg

Answer:

The first graph

Explanation:

Correct on Edge 2022! :]

QUESTION
The strongest Stars used to be called
what?

Answers

Answer:

Absolute magnitude

Explanation:

The brightness a star would have if it were at 10 pc from Earth is called Absolute magnitude.

w
х
2. Identify the correct statement about the diagrams above.
O Y represents a mixture and Z represents an element.
O Y represents an compund and X represents a pure substance.
O X represents a mixture and W represents a pure substance
O W represents an element and Y represents a mixture.

Answers

Answer: W represents an element Y represents a mixture

Explanation: I just took a quiz on this and got it right. Good Luck

pleeeeeeease help asap

Name 2 activities to improve Muscular Strength. Explain what muscles these activities will improve.

Answers

Answer:

Pushups will improve your biceps. Pull ups will improve your core and abdomen


A 0.6 kg basketball moving 7.2 m/s to the right collides with a 0.04 kg tennis
ball moving 22 m/s to the left. After the collision, the tennis ball is moving
32.7 m/s to the right. What is the velocity of the basketball after the collision?
Assume an elastic collision occurred.
A. 10.9 m/s to the right
B. 10.9 m/s to the left
C.3.6 m/s to the left
D. 3.6 m/s to the right

Answers

Answer:b

Explanation:

The final velocity of the basketball after it undergoes collision with the tennis ball is 6.49m/s.

What is Final velocity?

The final velocity is a vector quantity which measures the speed and direction of a moving object after it has reached its maximum acceleration and distance.

Given data,

mass of basket ball (m₁) = 0.6kg

mass of tennis ball (m₂) = 0.04kg

velocity of basket ball (v₁) = 7.2m/s

velocity of  tennis ball (v₂) = 22m/s

velocity of basket ball (v₃) =?

velocity of  tennis ball (v₄) = 32.7m/s

We already know that the expression for elastic collision is given as

m₁v₁ +m₂v₂ = m₁v₃ + m₂v₄

Substituting these values, we get

0.6 × 7.2 + 0.04 × 22 = 0.6 × x + 0.04 × 32.7

4.32 + 0.88 = 0.6x + 1.308

Solving for x we have,

3.892 = 0.6x

x = 3.892 /0.6

x=6.49m/s

Therefore, the velocity of the basketball after the collision is 6.49m/s.

Learn more about Collision here:

https://brainly.com/question/13138178

#SPJ5

Other Questions
a typical baseball has a mass of 350g and takes up a volume of .780L. what is the density of a baseball in g/l and g/ml? PLEASE HELP QUICKLY AS POSSIBLE THANK YOU :) what is the climax of the great great ice cream heist organize the following location's from the smallest to largest respectively A.Texas B.United states C.North America D.City of Mission E.Hidalgo county No quiero___fruta___ensaladaA. o,oB. ni,oC. y,yD. ni,niPlease help!! (8x^3+4x^2+x)-(2x^3+x^2+x) identify the compound that plants make to store it as energy. A. lightB. waterC. oxygenD. glucoseE. carbon dioxide Water is the ideal medium to have within our bodies BECAUSE it facilitates chemical reactions. a Both the assertion and the reason are incorrect. b The assertion is incorrect, but the reason is correct. c The assertion is correct, but the reason is incorrect. d The assertion and the reason are both correct, but the reason is invalid. e The assertion and the reason are both correct, and the reason is valid. {FRENCH} In an idiomatic pronominal verb, the pronoun is part of:an expressionthe verb itselfthe indirect object Triangle PQR has vertices , , and . It is translated according to the rule 5. Explain why the particle diagram below represents a chemical change.plsss help!!! Consider a spring that does not obey Hooke's law very faithfully. One end of the spring is fixed. To keep the spring stretched or compressed an amount x, a force along the x-axis with x-component Fx=kxbx2+cx3 must be applied to the free end. Here k=100N/m, b=700N/m2, and c=12000N/m3. Note that x>0 when the spring is stretched and x As part of a soil analysis on a plot of land, a scientist wants to determine the ammonium content using gravimetric analysis with sodium tetraphenylborate, Na+B(C6H5)4. Unfortunately, the amount of potassium, which also precipitates with sodium tetraphenylborate, is nonnegligible and must be accounted for in the analysis. Assume that all potassium in the soil is present as K2CO3 and all ammonium is present as NH4Cl. A 5.025 g soil sample was dissolved to give 0.500 L of solution. A 100.0 mL aliquot was acidified and excess sodium tetraphenylborate was added to precipitate both K+ K + and NH+4 ions completely. Compound Formula mass B(C6H5)4+K+KB(C6H5)4(s) KB(C6H5)4 358.33 g/mol B(C6H5)4+NH+4NH4B(C6H5)4(s) NH4B(C6H5)4 337.27 g/mol K2CO3 138.21 g/mol NH4Cl 53.492 g/mol The resulting precipitate amounted to 0.277 g. A new 200.0 mL aliquot of the original solution was made alkaline and heated to remove all of the NH+4 as NH3. The resulting solution was then acidified, and excess sodium tetraphenylborate was added to give 0.105 g of precipitate. Find the mass percentages of NH4Cl and K2CO3 in the original solid.______ %NH4CL______ %K2CO3 PRETTY PLEASE HELP !!!! The points A(-3, 3), B(0,7), C(4, 10), D(1,6) create parallelogram ABCD. What is the perimeter of parallelogram ABCD, in units? I kinda need some help Find the quotient of 12 5 2 5 . 1. Rewite the division as multiplication by the reciprocal.The rewritten expression is 2. Multiply the numerators to get , and then multiply the denominators to get 3. Simplify. The quotient is The measure of an angle is 53.8. What is the measure of its complementary angle? FIRST RIGHT GETS BRAINLIEST Which one is correct?A)The first is correct.B)First is correct.C)A and B are both correct.