Answer:
The speed of the electron is 6.79 x 10⁵ m/s
The radius of the circular path is 1.357 x 10⁻⁵ m
Explanation:
Given;
magnetic field, B = 0.285 T
energy of electron, E = 2.10 x 10⁻¹⁹ J
The kinetic energy of the electron is calculated as;
[tex]K.E = \frac{1}{2} m_eV^2[/tex]
Where;
[tex]m_e[/tex] is the mass of electron = 9.11 x 10⁻³¹ kg
V is the speed of the electron
[tex]K.E = \frac{1}{2} m_eV^2\\\\V^2 = \frac{2.K.E}{m_e} \\\\V = \sqrt{\frac{2K.E}{m_e} } \\\\V = \sqrt{\frac{2*(2.1*10^{-19})}{9.11*10^{-31}} }\\\\V = 6.79 *10^{5} \ m/s[/tex]
The radius of the circular path is given by;
[tex]R = \frac{M_eV}{qB}[/tex]
where;
q is the charge of the electron = 1.6 x 10⁻¹⁹ C
[tex]R = \frac{M_eV}{qB} \\\\R = \frac{9.11 *10^{-31}*6.79 *10^{5}}{1.6*10^{-19}*0.285} \\\\R = 1.357 *10^{-5} \ m[/tex]
An aluminum cup of mass 150 g contains 800 g of water in thermal equilibrium at 80.0°C. The combination of cup and water is cooled uniformly so that the temperature decreases by 1.50°C per minute. At what rate is energy being removed by heat? Express your answer in watts.
Answer:
Heat Flow Rate : ( About ) 87 W
Explanation:
The heat flowing out of the system each minute, will be represented by the following equation,
Q( cup ) + Q( water ) = m( cup ) [tex]*[/tex] c( al ) [tex]*[/tex] ΔT + m( w ) [tex]*[/tex] c( w ) [tex]*[/tex] ΔT
So as you can see, the mass of the aluminum cup is 150 grams. For convenience, let us convert that into kilograms,
150 grams = .15 kilograms - respectively let us convert the mass of water to kilograms,
800 grams = .8 kilograms
Now remember that the specific heat of aluminum is 900 J / kg [tex]*[/tex] K, and the specific heat of water = 4186 J / kg [tex]*[/tex] K. Therefore let us solve for " the heat flowing out of the system per minute, "
Q( cup ) + Q( water ) = .15 [tex]*[/tex] ( 900 J / kg [tex]*[/tex] K ) [tex]*[/tex] 1.5 + .8 [tex]*[/tex] ( 4186 J / kg [tex]*[/tex] K ) [tex]*[/tex] 1.5,
Q( cup ) + Q( water ) = 5225.7 Joules
And the heat flow rate should be Joules per minute,
5225.7 Joules / 60 seconds = ( About ) 87 W
Two identical wooden barrels are fitted with long pipes extending out their tops. The pipe on the first barrel is 1 foot in diameter, and the pipe on the second barrel is only 1/2 inch in diameter. When the larger pipe is filled with water to a height of 20 feet, the barrel bursts. To burst the second barrel, will water have to be added to a height less than, equal to, or greater than 20 feet? Explain.
Answer:
The 1/2 inch barrel will burst at the same height of 20 ft
Explanation:
The pressure on a column of fluid increases with depth, and decreases with height. This means that if you increase the height of the fluid in the column, the pressure at the bottom will increase.
From the equation of fluid pressure,
P = ρgh
where
P is the pressure at the bottom of the fluid due to its height
ρ is the density of the fluid in question
h is the height to which the water stand.
You notice how apart from the height 'h' in the equation, all the other parts of the right hand side of the equation cannot be varied; they are a fixed property of the fluid and gravity. And there is no consideration for the horizontal diameter of the water's cross section area.
We can also think of the pressure at the bottom of the fluid to be as a result of an incremental weight of an infinitesimally small vertical section of the water down.
That been said, we can then say that if the barrel with the 1 ft diameter dimension bursts when filled with water up to 20 ft, then, the barrel with the reduced diameter will still burst at the same height as the former pipe.
NB: The only way to stop the pipe from bursting is to increase the thickness of the barrel wall to counteract the pressure forces due to the height.
An electron moves to the left along the plane of the page, while a uniform magnetic field points into the page. What direction does the force act on the moving electron
Answer:
acting force is the answer
The direction of the magnetic force on the moving electron is upward.
The direction of the magnetic force on the electron can be determined by applying right hand rule.
This rule states that when the thumb is held perpendicular to the fingers, the thumb will point in the direction of the speed while the fingers will point in the direction of the field and the magnetic force will be perpendicular to the field.
Thus, we can conclude that, the direction of the magnetic force on the moving electron is upward.
Learn more here:https://brainly.com/question/14434299
1/1
2. Fluid flows at 2.0 m/s through a pipe of diameter 3.0 cm. What is the
volume flow rate of the fluid in m^3/s *
Answer:
9.42*10^-4 m^3/s
Explanation:
d=3/100 m
=0.03 m
A=3.14*0.03^2/6
=4.71*10^-4 m^2
Volume flow rate V = A * s
= 4.71*10^-4 * 2
= 9.42*10^-4
So, the volume flw rate of fluid is 9.42*10^-4 m^3/s
In a polar coordinate system, the velocity vector can be written as . The term theta with dot on top is called _______________________ angular velocity transverse velocity radial velocity angular acceleration
Answer:
I believe it's called rapid growth
Explanation:
that is my answer no matter what
Based on the graph below, what prediction can we make about the acceleration when the force is 0 newtons? A. It will be 0 meters per second per second. B. It will be 5 meters per second per second. C. It will be 10 meters per second per second. D. It will be 15 meters per second per second.
Answer:
Option A
Explanation:
From the graph, we came to know that Force and acceleration are in direct relationship.
Also,
Force = 0 when Acceleration = 0
Because Both are 0 at the origin.
Answer:
A. It will be 0 meters per second per second.
Explanation:
The force and acceleration is in a proportional relationship, that means the line goes through the origin.
On the graph, when the force is at 0, the acceleration is 0. The line passes through the origin.
Two point charges of +2.0 μC and -6.0 μC are located on the x-axis at x = -1.0 cm and x 12) = +2.0 cm respectively. Where should a third charge of +3.0-μC be placed on the +x-axis so that the potential at the origin is equal to zero?
Answer:
x = 0.006 m
Explanation:
The potential at one point is given by
V = k ∑ [tex]q_{i} / r_{i}[/tex]
remember that the potential is to scale, let's apply to our case
V = k (q₁ / x₁ + q₂ / x₂ + q₃ / x)
in this case they indicate that the potential is zero
0 = k (2 10⁻⁶ / (- 1 10⁻²) + (-6 10⁻⁶) / 2 10⁻² + 3 10⁻⁶ / x)
3 / x = + 2 / 10⁻² + 3 / 10⁻²
3 / x = 500
x = 3/500
x = 0.006 m
g Question 11 pts Consider two masses connected by a string hanging over a pulley. The pulley is a uniform cylinder of mass 3.0 kg. Initially m1 is on the ground and m2 rests 2.9 m above the ground. After the system is released, what is the speed of m2 just before it hits the ground? m1= 30 kg and m2= 35 kg Group of answer choices 2.1 m/s 1.4 m/s 9.8 m/s 4.3 m/s 1.9 m/s
Answer:
The speed of m2 just before it hits the ground is 2.1 m/s
Explanation:
mass on the ground m1 = 30 kg
mass oat rest at the above the ground m2 = 35 kg
height of m2 above the ground =2.9 m
Let the tension on the string be taken as T
for the mass m2 to reach the ground, its force equation is given as
[tex]m_{2} g - T = m_{2}a[/tex] ....equ 1
where g is acceleration due to gravity = 9.81 m/s^2
and a is the acceleration with which it moves down
For mass m1 to move up, its force equation is
[tex]T - m_{1} g = m_{1} a[/tex]
[tex]T = m_{1}a + m_{1}g[/tex]
[tex]T = m_{1}(a + g)[/tex] ....equ 2
substituting T in equ 1, we have
[tex]m_{2} g - m_{1}(a+g) = m_{2}a[/tex]
imputing values, we have
[tex](35*9.81) - 30(a+9.81) = 35a[/tex]
[tex]343.35 - 30a-294.3 = 35a[/tex]
[tex]343.35 -294.3 = 35a+ 30a[/tex]
[tex]49.05 = 65a[/tex]
a = 49.05/65 = 0.755 m/s^2
The initial velocity of mass m2 = u = 0
acceleration of mass m2 = a = 0.755 m/s^2
distance to the ground = d = 2.9 m
final velocity = v = ?
using Newton's equation of motion
[tex]v^{2}= u^{2} + 2ad[/tex]
substituting values, we have
[tex]v^{2}= 0^{2} + 2*0.755*2.9[/tex]
[tex]v^{2}= 2*0.755*2.9 = 4.379\\v = \sqrt{4.379}[/tex]
v = 2.1 m/s
Suppose you have a lens system that is to be used primarily for 775-nm light. What is the second thinnest coating of fluorite (calcium fluoride) that would be non-reflective for this wavelength?
Answer:
406 nm
Explanation:
We are given;
Wavelength; λ = 775 nm
Refractive index of Calcium fluoride with wavelength of 775 nm as seen in the graph attached is approximately 1.4308.
n = 1.4308
Formula for the thickness of the film that would destruct the light is;
t = (m + 0.5)(λ/2n)
Where m is the order of the thickness.
The first smallest thickness is at m = 0 while the second smallest thickness is at m = 1.
Thus;
t = (1 + 0.5)(775/(2 × 1.4308))
t ≈ 406 nm
If the current flowing through a circuit of constant resistance is doubled, the power dissipated by that circuit will
. If you live in a region that has a particular TV station, you can sometimes pick up some of its audio portion on your FM radio receiver. Explain how this is possible. Does it imply that TV audio is broadcast as FM
Answer:
Please see below as the answer is self-explanatory.
Explanation:
The low band of the VHF TV Spectrum, spans channels 2-6, from 54 to 88 Mhz.
In the analog TV, in the Americas, the total bandwidth of any channel is 6 Mhz, with the visual carrier modulated in VSS (Vestigial Side Band) at 1.25 Mhz from the lowest frequency of the channel.
The aural carrier is located at 4.5 Mhz from the visual carrier, and is FM modulated.
For Channel 6, which spans between 82 and 88 Mhz, the visual carrier is at 83.25 Mhz, so the aural carrier is at 87.75 Mhz, which falls within the FM Band, so it is possible to listen the audio part of this channel in a FM radio receiver, even at a lower volume, due to the FM radio has a greater deviation than TV aural carrier.
The reason why it is possible for TV station to sometimes pick up some of the audio portion on your FM radio receiver is because; TV waves can sometimes deviate into the FM radio frequency range.
Let us start with explaining the waves of TV and radio.
The frequency range utilized by TV stations is either the range 54 MHz to 88 MHz or 174 MHz to 222 MHz. In contrast, the frequency range utilized by FM Radio band is between 88 MHz and 174 MHz.
Now, in some cases, it is possible that the TV signal may deviate into the range of the FM Radio and as such in that case, the TV signal will pick the audio portion of an FM Radio. These TV waves are very high frequency waves.
Finally, it does not imply that the TV wave is broadcasting as an FM because it only deviated a bit from the TV range and not like that is where it is made to operate.
Read more about TV waves at; https://brainly.com/question/9684913
If a bicycle starts from rest and is pedaled normally until the bike is moving at 6 meters per second across level ground, what kinds of energy have its tires been given? (Select all that apply) g
Answer: Translational Kinetic Energy
Rotational Kinetic Energy
Explanation:
An object has translational kinetic energy when it is undergoing through a linear displacement.
Rotational energy is kinetic energy due to the rotation of an object .
Here the wheel of bicycle undergoes both translational and rotational kinetic energy has it moves with linear displacement with rotation in it.
Hence, the tires have been two kinds of energy : translational and rotational kinetic energy
A physics professor wants to perform a lecture demonstration of Young's double-slit experiment for her class using the 633-nm light from a He-Ne laser. Because the lecture hall is very large, the interference pattern will be projected on a wall that is 4.0 m from the slits. For easy viewing by all students in the class, the professor wants the distance between the m
What slit separation is required in order to produce the desired interference pattern?
d=________m
Note: if the professor wants the distance between the m = 0 and m = 1 maxima to be 25 cm
Answer:
d = 1.0128×10⁻⁵m
Explanation:
given:
length L = 4.0m
maximum distance between m = 0 and m = 1 , y = 25cm = 0.25m
wavelength λ = 633nm = 633×10⁻⁹m
note:
dsinθ = mλ (constructive interference)
where d is slit seperation, θ is angle of seperation , m is order of interference , and λ is wavelength
for small angle
sinθ ≈ tanθ
[tex]d (\frac{y}{L}) =[/tex] mλ
[tex]d (\frac{y}{L}) = (1)(633nm)[/tex]
[tex]d(\frac{0.25}{4} ) = (1)(633nm)[/tex]
d = 1.0128×10⁻⁵m
A long solenoid (1500 turns/m) carries a current of 20 mA and has an inside diameter of 4.0 cm. A long wire carries a current of 2.0 A along the axis of the solenoid. What is the magnitude of the magnetic field at a point that is inside the solenoid and 1.0 cm from the wire
Answer:
The magnitude of the magnetic field is 55μT
Explanation:
Given;
number of turns of the solenoid per length, n = N/L = 1500 turns/m
current in the solenoid, I = 20 mA = 20 x 10⁻³ A
diameter of the solenoid, d = 4 cm = 0.04 m
The magnetic field at a point that is inside the solenoid;
B₁ = μ₀nI
Where;
μ₀ is permeability of free space = 4π x 10⁻⁷ m/A
B₁ = 4π x 10⁻⁷ x 1500 x 20 x 10⁻³
B₁ = 3.77 x 10⁻⁵ T
Given;
current in the wire, I = 2 A
distance of magnetic field from the wire, r = 1 cm = 0.01 m
The magnetic field at 1.0 cm from the wire;
[tex]B_2 = \frac{\mu_0I}{2\pi r} \\\\B_2 = \frac{4\pi*10^{-7}*2}{2\pi *0.01}\\\\B_2 = 4 *10^{-5} \ T[/tex]
The magnitude of the magnetic field;
[tex]B = \sqrt{B_1^2 +B_2^2} \\\\B = \sqrt{(3.77*10^{-5})^2 + (4*10^{-5})^2} \\\\B = 5.5 *10^{-5} \ T\\\\B = 55 \mu T[/tex]
Therefore, the magnitude of the magnetic field is 55μT
The magnitude of the magnetic field at a point that is inside the solenoid and 1.0 cm from the wire is [tex]5.5 \times 10^{-5}T[/tex]
Given the following parameters from the question
Number of turns of the solenoid per length, n = N/L = 1500 turns/m current in the solenoid, I = 20 mA = 20 x 10⁻³ A Diameter of the solenoid, d = 4 cm = 0.04 mThe magnetic field at a point that is inside the solenoid is expressed according to the formula;
B₁ = μ₀nIWhere;
μ₀ is the permeability of free space = 4π x 10⁻⁷ m/A
B₁ = 4π x 10⁻⁷ x 1500 x 20 x 10⁻³
B₁ = 3.77 x 10⁻⁵ T
Next is to get the magnetic field strength in the second wire.
Current in the wire, I = 2 A Distance of magnetic field from the wire, r = 1 cm = 0.01 mThe magnetic field at 1.0 cm from the wireSubstitute into the formula:
[tex]B_2=\dfrac{\mu_0 I}{2 \pi r} \\B_2=\frac{4\pi \times 10^{-7}\times 2}{2 \times 3.14\times 0.01} \\B_2 =4.0 \times 10^{-5}T[/tex]
Get the resultant magnetic field:
[tex]B = \sqrt{(0.00003771)^2+(0.00004)^2} \\B =5.5 \times 10^{-7}T[/tex]
Therefore the magnitude of the magnetic field at a point that is inside the solenoid and 1.0 cm from the wire is [tex]5.5 \times 10^{-5}T[/tex]
Learn more on the magnetic field here: https://brainly.com/question/15277459
In a shot-put competition, a shot moving at 15m/s has 450J of mechanical kinetic energy. What is the mass of the shot? Please help, and include the formula for the answer and a step by step explanation
Answer:
Mass of shot (m) = 4 kg
Explanation:
Given:
Velocity (v) = 15 m/s
Mechanical kinetic energy (K.E) = 450 J
Find:
Mass of shot (m) = ?
Computation:
Mechanical kinetic energy (K.E) = 1/2mv²
Mechanical kinetic energy (K.E) = [1/2](m)(15)²
450 = [1/2](m)(15)²
900 = 225 m
Mass of shot (m) = 4 kg
soaring birds and glider pilots can remain aloft for hours without expending power. Discuss why this is so.
Answer:
Since their wings and body develop the drag. When there is warm air then they expand their wings. Since,soaring birds and glider pilots have no engine, they always maintain their high speed to lift their weight in air for hours without expending power by convection
Explanation:
If a system has 4.50×102 kcal of work done to it, and releases 5.00×102 kJ of heat into its surroundings, what is the change in internal energy (ΔE or Δ????) of the system?
The change in internal energy (ΔE) of the system is equal to -18823 Kilojoules.
Given the following data:
Quantity of heat = [tex]5.00 \times 10^2 \;kJ[/tex]Work done = [tex]4.50 \times 10^2 \;kcal[/tex]Conversion:
1 kcal = 4.184 kJ
[tex]4.50 \times 10^2 \;kcal[/tex] = [tex]4.50 \times 10^2 \times 4.184 = 18828 \; kJ[/tex]
To determine the change in internal energy (ΔE) of the system, we would apply the first law of thermodynamics.
Mathematically, the first law of thermodynamics is given by the formula:
[tex]\Delta E = Q - W[/tex]
Where;
[tex]\Delta E[/tex] is the change in internal energy.Q is the quantity of heat released.W is the work done.Substituting the given parameters into the formula, we have;
[tex]\Delta E = 5 - 18828\\\\\Delta E = -18823[/tex]
Change in internal energy, E = -18823 Kilojoules
Read more: https://brainly.com/question/20599052
A wheel rotating about a fixed axis has a constant angular acceleration of 4.0 rad/s2. In a 4.0-s interval the wheel turns through an angle of 80 radians. Assuming the wheel started from rest, how long had it been in motion at the start of the 4.0-s interval
Answer:
The time interval is [tex]t = 3 \ s[/tex]
Explanation:
From the question we are told that
The angular acceleration is [tex]\alpha = 4.0 \ rad/s^2[/tex]
The time taken is [tex]t = 4.0 \ s[/tex]
The angular displacement is [tex]\theta = 80 \ radians[/tex]
The angular displacement can be represented by the second equation of motion as shown below
[tex]\theta = w_i t + \frac{1}{2} \alpha t^2[/tex]
where [tex]w_i[/tex] is the initial velocity at the start of the 4 second interval
So substituting values
[tex]80 = w_i * 4 + 0.5 * 4.0 * (4^2)[/tex]
=> [tex]w_i = 12 \ rad/s[/tex]
Now considering this motion starting from the start point (that is rest ) we have
[tex]w__{4.0 }} = w__{0}} + \alpha * t[/tex]
Where [tex]w__{0}}[/tex] is the angular velocity at rest which is zero and [tex]w__{4}}[/tex] is the angular velocity after 4.0 second which is calculated as 12 rad/s s
[tex]12 = 0 + 4 t[/tex]
=> [tex]t = 3 \ s[/tex]
Following are the response to the given question:
Given:
[tex]\to \alpha = 4.0 \ \frac{rad}{s^2}\\\\[/tex]
[tex]\to \theta= 80\ radians\\\\\to t= 4.0 \ s\\\\ \to \theta_0=0\\[/tex]
To find:
[tex]\to \omega=?\\\\\to t=?\\\\[/tex]
Solution:
Using formula:
[tex]\to \theta- \theta_0 = w_{0} t+ \frac{1}{2} \alpha t^2\\\\ \to 80-0= \omega_{0}(4) + \frac{1}{2} (4)(4^2)\\\\ \to 80= \omega_{0}(4) + \frac{1}{2} (4)(16)\\\\\\to 80= \omega_{0}(4) + (4)(8)\\\\\to 80= \omega_{0}(4) + 32\\\\\to 80-32 = \omega_{0}(4) \\\\\to \omega_{0}(4)= 48 \\\\\to \omega_{0}= \frac{48}{4} \\\\ \to \omega_{0} = 12 \frac{rad}{ s} \\\\[/tex]
It would be the angle for rotation at the start of the 4-second interval.
This duration can be estimated by leveraging the fact that the wheel begins from rest.
[tex]\to \omega = \omega_{0} + \alpha t\\\\\to 12 = 0 +4(t) \\\\\to 12 = 4(t) \\\\ \to t=\frac{12}{4}\\\\\to t= 3\ s[/tex]
Therefore, the answer is "[tex]12\ \frac{rad}{s}[/tex] and [tex]3 \ s[/tex]".
Learn more:
brainly.com/question/7464119
If radio waves were used to communicate with an alien spaceship approaching Earth at 10% of the speed of light c, Earth would receive their signals at a speed of
Answer:
Explanation:
speed of alien spaceship = .1 c
We shall apply formula of relativistic mechanics to solve the problem
relative velocity =
[tex]\frac{v+v_1}{1 -\frac{v\times v }{c^2} }[/tex]
Here v = v₁ = .1 c
relative velocity = .1c + .1 c / 1 - .1²
= .2 c / .99
= .202 c
The earth would receive the signal at the speed of .202 c .
Two spherical objects at the same altitude move with identical velocities and experience the same drag force at a time t. If Object 1 has twice (2x) the diameter of Object 2, which object has the larger drag coefficient? Explain your answer using the drag equation.
Answer:
The object with the twice the area of the other object, will have the larger drag coefficient.
Explanation:
The equation for drag force is given as
[tex]F_{D} = \frac{1}{2}pu^{2} C_{D} A[/tex]
where [tex]F_{D}[/tex] IS the drag force on the object
p = density of the fluid through which the object moves
u = relative velocity of the object through the fluid
p = density of the fluid
[tex]C_{D}[/tex] = coefficient of drag
A = area of the object
Note that [tex]C_{D}[/tex] is a dimensionless coefficient related to the object's geometry and taking into account both skin friction and form drag. The most interesting things is that it is dependent on the linear dimension, which means that it will vary directly with the change in diameter of the fluid
The above equation can also be broken down as
[tex]F_{D}[/tex] ∝ [tex]P_{D}[/tex] A
where [tex]P_{D}[/tex] is the pressure exerted by the fluid on the area A
Also note that [tex]P_{D}[/tex] = [tex]\frac{1}{2}pu^{2}[/tex]
which also clarifies that the drag force is approximately proportional to the abject's area.
In this case, the object with the twice the area of the other object, will have the larger drag coefficient.
A charge is placed on a spherical conductor of radius r1. This sphere is then connected to a distant sphere of radius r2 (not equal to r1) by a conducting wire. After the charges on the spheres are in equilibrium:__________.
1. the electric fields at the surfaces of the two spheres are equal.
2. the amount of charge on each sphere is q/2.
3. both spheres are at the same potential. the potentials are in the ratio V2/V1 = q2/q1.
4. the potentials are in the ratio V2/V1 = r2/r1 .
Answer:
Option 3 = both spheres are at the same potential.
Explanation:
So, let us complete or fill the missing gap in the question above;
" A charge is placed on a spherical conductor of radius r1. This sphere is then connected to a distant sphere of radius r2 (not equal to r1) by a conducting wire. After the charges on the spheres are in equilibrium BOTH SPHERES ARE AT THE SAME POTENTIAL"
The reason both spheres are at the same potential after the charges on the spheres are in equilibrium is given below:
=> So, if we take a look at the Question again, the kind of connection described in the question above (that is a charged sphere, say X is connected another charged sphere, say Y by a conducting wire) will eventually cause the movement of charges(which initially are not of the same potential) from X to Y and from Y to X and this will continue until both spheres are at the same potential.
An electron traveling with a speed v enters a uniform magnetic field directed perpendicular to its path. The electron travels for a time t0 along a half-circle of radius R before leaving the magnetic field traveling opposite the direction it initially entered the field. Which of the following quantities would change if the electron had entered the field with a speed 2v? (There may be more than one correct answer.)
a. The radius of the circular path the electron travels
b. The magnitude of the electron's acceleration inside the field
c. The time the electron is in the magnetic field
d. The magnitude of the net force acting on the electron inside the field
Answer:
Explanation:
For circular path in magnetic field
mv² / R = Bqv ,
m is mass , v is velocity , R is radius of circular path , B is magnetic field , q is charge on the particle .
a )
R = mv / Bq
If v is changed to 2v , keeping other factors unchanged , R will be doubled
b )
magnitude of acceleration inside field
= v² / R
= Bqv / m
As v is doubled , acceleration will also be doubled
c )
If T be the time inside the magnetic field
T = π R / v
= π / v x mv / Bq
= π m / Bq
As is does not contain v that means T remains unchanged .
d )
Net force acting on electron
= m v² / R = Bqv
Net force = Bqv
As v becomes twice force too becomes twice .
So a . b , d are correct answer.
A department store expects to have 225 customers and 20 employees at peak times in summer. Determine the contribution of people to the total cooling load of the store. The average rate of heat generation from people doing light work is 115 W, and 70% of it is in sensible form.
Answer:
The contribution of people to the cooling load of the store is 19722.5 W
Explanation:
Total amount of customers = 225
Total amount of employees = 20
Total amount of people in the store at that instant n = 245 people
Average rate of heat generation Q = 115 W
percentage of these heat generated that is sensible heat = 70%
Sensible heat raises the surrounding temperature. Latent heat only causes a change of state.
The total heat generated by all the people in the store = n x Q
==> 245 x 115 = 28175 W
but only 70% of this heat is sensible heat that raises the temperature of the store, therefore, the contribution of people to the cooling load of the store = 70% of 28175 W
==> 0.7 x 28175 = 19722.5 W
g How many rpm would a 25 m diameter Ferris wheel need to travel if a 75 kg person were to experience an effective weight of 810 N at the lower-most point of the ride
Answer:
2.52 rpm
Explanation:
given that
diameter of the wheel, d = 25 m
Mass of the person, m = 75 kg
Weight experienced, N = 810 N
Since diameter is 25, radius then is 25/2 = 12.5 m
We all know that,
v = rw
Also, the passengers weight is equal to the centripetal acceleration, and thus
mg = mv²/r
Substitute for v, we have
mg = m/r * (rw)²
mg = mr²w²/r
g = rw²
If we make w the subject of formula, we have
w² = g/r
w = √(g/r)
mg = 810
75 * g = 810
g = 810 / 75
g = 1.08 m/s²
w = √(g/r)
w = √(1.08 / 12.5)
w = √0.0864
w = 0.294 rad/s
Since the question asked us in rpm, we convert to rpm
0.294 * (60 / 2π)
2.52 revolution per minute.
A flat loop of wire consisting of a single turn of cross-sectional area 8.20 cm2 is perpendicular to a magnetic field that increases uniformly in magnitude from 0.500 T to 2.60 T in 1.02 s. What is the resulting induced current if the loop has a resistance of 2.70
Answer:
The induced current is [tex]I = 6.25*10^{-4} \ A[/tex]
Explanation:
From the question we are told that
The number of turns is [tex]N = 1[/tex]
The cross-sectional area is [tex]A = 8.20 cm^2 = 8.20 * 10^{-4} \ m^2[/tex]
The initial magnetic field is [tex]B_i = 0.500 \ T[/tex]
The magnetic field at time = 1.02 s is [tex]B_t = 2.60 \ T[/tex]
The resistance is [tex]R = 2.70\ \Omega[/tex]
The induced emf is mathematically represented as
[tex]\epsilon = - N * \frac{ d\phi }{dt}[/tex]
The negative sign tells us that the induced emf is moving opposite to the change in magnetic flux
Here [tex]d\phi[/tex] is the change in magnetic flux which is mathematically represented as
[tex]d \phi = dB * A[/tex]
Where dB is the change in magnetic field which is mathematically represented as
[tex]dB = B_t - B_i[/tex]
substituting values
[tex]dB = 2.60 - 0.500[/tex]
[tex]dB = 2.1 \ T[/tex]
Thus
[tex]d \phi = 2.1 * 8.20 *10^{-4}[/tex]
[tex]d \phi = 1.722*10^{-3} \ weber[/tex]
So
[tex]|\epsilon| = 1 * \frac{ 1.722*10^{-3}}{1.02}[/tex]
[tex]|\epsilon| = 1.69 *10^{-3} \ V[/tex]
The induced current i mathematically represented as
[tex]I = \frac{\epsilon}{ R }[/tex]
substituting values
[tex]I = \frac{1.69*10^{-3}}{ 2.70 }[/tex]
[tex]I = 6.25*10^{-4} \ A[/tex]
A ball is thrown at 23.2 m/s inside a boxcar moving along the tracks at 34.9 m/s. What is the speed of the ball relative to the ground if the ball is thrown forward
Answer:
The speed of the ball relative to the ground if the ball is thrown forward is 58.1 m/s
Explanation:
Given;
speed of the ball thrown inside boxcar, [tex]V_B[/tex] = 23.2 m/s
speed of the boxcar moving along the tracks, [tex]V_T[/tex] = 34.9 m/s
Determine the speed of the ball relative to the ground if the ball is thrown forward.
If the ball is thrown forward, the speed of the ball relative to the ground will be sum of the ball's speed plus speed of the boxcar.
[tex]V_{relative \ speed} = V_B + V_T\\\\V_{relative \ speed} = 23.2 + 34.9\\\\V_{relative \ speed} = 58.1 \ m/s[/tex]
Therefore, the speed of the ball relative to the ground if the ball is thrown forward is 58.1 m/s.
a large crane has a mass of 8500kg calculate the weight of the crane
Answer:
Weight is 83 385 N
Explanation:
Weight is calculated by multiplying the mass by the gravitational acceleration constant
Weight = mass* gravity
Assuming that the gravitational constant is 9.81 m/s^2
Weight = mass* gravity
Weight of crane = (8500 kg)*(9.81 m/s^2)
Weight = 83 385 kg*m/s^2 or 83 385 N
A conventional current of 3 A runs clockwise in a circular loop of wire in the plane, with center at the origin and with radius 0.093 m. Another circular loop of wire lies in the same plane, with its center at the origin and with radius 0.03 m. How much conventional current must run counterclockwise in this smaller loop in order for the magnetic field at the origin to be zero
Answer:
The current in the small radius loop must be 0.9677 A
Explanation:
Recall that the formula for the magnetic field at the center of a loop of radius R which runs a current I, is given by:
[tex]B=\mu_0\,\frac{I}{2\,R}[/tex]
therefore for the first loop in the problem, that magnetic field strength is:
[tex]B=\mu_0\,\frac{I}{2\,R} =\mu_0\,\frac{3}{2\,(0.093)} =16.129\,\mu_{0}\,[/tex]
with the direction of the magnetic field towards the plane.
For the second smaller loop of wire, since the current goes counterclockwise, the magnetic field will be pointing coming out of the plane, and will subtract from the othe field. In order to the addition of these two magnetic fields to be zero, the magnitudes of them have to be equal, that is:
[tex]16.129\,\,\mu_{0}=\mu_0\,\frac{I'}{2\,R'} =\mu_{0}\,\frac{I'}{2\,(0.03)} \\I'=16.129\,(2)\,(0.03)=0.9677\,\,Amps[/tex]
. A 24-V battery is attached to a 3.0-mF capacitor and a 100-ohm resistor. If the capacitor is initially uncharged, what is the voltage across the capacitor 0.16 seconds after the circuit is connected to the battery
Answer:
The voltage is [tex]V_c = 9.92 \ V[/tex]
Explanation:
From the question we are told that
The voltage of the battery is [tex]V_b = 24 \ V[/tex]
The capacitance of the capacitor is [tex]C = 3.0 mF = 3.0 *10^{-3} \ F[/tex]
The resistance of the resistor is [tex]R = 100\ \Omega[/tex]
The time taken is [tex]t = 0.16 \ s[/tex]
Generally the voltage of a charging charging capacitor after time t is mathematically represented as
[tex]V_c = V_o (1 - e^{- \frac{t}{RC} })[/tex]
Here [tex]V_o[/tex] is the voltage of the capacitor when it is fully charged which in the case of this question is equivalent to the voltage of the battery so
[tex]V_c = 24 (1 - e^{- \frac{0.16}{100 * 3.0 *10^{-1}} })[/tex]
[tex]V_c = 9.92 \ V[/tex]
A motorcycle travels up one side of a hill over the top and down the other side. The crest of the hill can be considered to be a circular arc with radius of 45.0 m. Determine the maximum speed that the cycle can have while moving over the crest without losing contact with the road.
Answer:
The maximum speed of the motorcycle should be 21 m/s
Explanation:
Since the hill is considered to be a circular arc, the motorcycle will experience centripetal force that tends to flip it away from the center of the hill.
Since the motorcycle does not lose contact with the ground, it means that the weight of the motorcycle downwards just balances the centripetal force on the motorcycle.
we know that the centripetal force on the motorcycle is equal to
centripetal force = [tex]\frac{mv^{2} }{r}[/tex]
where m is the mass of the motorcycle,
v is the velocity of the motorcycle,
and r is the radius of the hill = 45.0 m
Also we now that the weight of the motorcycle is equal to
weight = mg
where m is still the mass of the motorcycle,
and g is the acceleration due to gravity = 9.81 m/s
Equating the both forces since they are equal, we'll have
[tex]\frac{mv^{2} }{r}[/tex] = mg
the mass of the motorcycle will cancel out, and we'll be left with
[tex]v^{2} = gr[/tex]
[tex]v = \sqrt{gr}[/tex]
[tex]v = \sqrt{9.81*45}[/tex]
[tex]v = \sqrt{441.45}[/tex]
[tex]v[/tex] = 21 m/s