Complete question is;
An ideal pendulum is often discussed when studying simple harmonic motion.
What are the conditions needed for an ideal pendulum? Check all that apply.
1) Gravitational force acts to pull the pendulum’s mass down.
2) The mass of the rod of the pendulum is evenly distributed along the rod.
3) The pivot on which the pendulum swings is frictionless.
4) The pendulum swings through its equilibrium position as a result of inertia.
5) Tension acts downward on the pendulum’s mass
Answer:
Conditions 2,3 & 4 are the ones that apply
Explanation:
The conditions required for an ideal pendulum are;
- The mass of the rod of the pendulum has to be evenly distributed along the rod.
- Ensure that the pivot on which the pendulum is swinging is frictionless
-The pendulum has to swing through it's equilibrium position as a result of inertia.
Thus,the correct options are 2, 3, 4.
Answer:
Gravitational force acts to pull the pendulum’s mass down.
The pivot on which the pendulum swings is frictionless.
The pendulum swings through its equilibrium position as a result of inertia.
Explanation:
Just took the test
Consider two walls, A and B, with the same surface areas and the same temperature drops across their thicknesses. The ratio of their thermal conductivities is kA/kB=4 and the ratio of the wall thickness is LA/LB=2. The ratio of heat transfer rates through the walls qA/qB is:
(a) 0.5
(b) 1
(c) 2
(d) 4
(e) 8
(f) None of them
Answer:
(c) 2
Explanation:
Heat transfer across the walls due to conduction is given by:
[tex]q = -KA\frac{\Delta T}{L}[/tex]
where,
q = heat transfer rate
K = thermal conductivity
A = Area
ΔT = change in temperature
L = thickness
For wall A:
[tex]q_A = -K_AA\frac{\Delta T}{L_A}[/tex]
For wall B:
[tex]q_B = -K_BA\frac{\Delta T}{L_B}[/tex]
Because the change of temperature and area of walls are the same. Dividing both terms:
[tex]\frac{q_A}{q_B} = \frac{\frac{K_A}{L_A} }{\frac{K_B}{L_B}}\\\\ \frac{q_A}{q_B} =\frac{\frac{K_A}{K_B} }{\frac{L_A}{L_B}}[/tex]
using values given in the question:
[tex]\frac{q_A}{q_B} = \frac{4}{2}\\\\\frac{q_A}{q_B} = 2[/tex]
Therefore, the correct answer is:
(c) 2
Helppp please pleaseeee fr
A laserbeam takes 24ms to travel from a rocket to a reflective surface of a planet and back to the rocket. How far, in miles, is the rocket from this planet’s surface?
A)2200 miles
B)3600 miles
C)2400 miles
please show work, thank you!
Answer:B
Explanation:
A 31 kg child is traveling at 4 m/s while sledding down a hill. What is the child's kinetic energy at the bottom of the hill?
Answer:
K.E = 248 J
Explanation:
Since the child is travelling at a given velocity. The kinetic energy of the child down the hill can be given by the following formula:
[tex]K.E = \frac{1}{2}mv^2\\[/tex]
where,
m = mass of the child = 31 kg
v = velocity of the child = 4 m/s
Therefore,
[tex]K.E = \frac{1}{2}(31\ kg)(4\ m/s)^2\\[/tex]
K.E = 248 J
Light traveling through air encounter a second medium which slows the light to 2.7 x 10^8. What is the index of the medium?
Answer:
1.11
Explanation:
The index of the medium can be calculated using below formula
V= c/ n ............eqn(1)
Where V= velocity of the light is reduced to while traveling through the second medium= 2.7 x 10^8 m/s
n= index of the medium
c= speed of light= 3 x 10^8 m/s
Substitute for the values in eqn(1)
2.7 x 10^8 = (3 x 10^8 m/s)/ n
Making " n" subject of the formula, we have
n= (3 x 10^8 )/(2.7 x 10^8)
n= 1.11
Hence, the index of the medium is 1.11
A high diver steps off a diving platform that is 10 meters above the water if no air resistance is present during the fall there will be a decrease in the divers what?
Answer:
Potential energy.
Explanation:
Potential energy can be defined as an energy possessed by an object or body due to its position.
Mathematically, potential energy is given by the formula;
[tex] P.E = mgh[/tex]
Where,
P.E represents potential energy measured in Joules.
m represents the mass of an object.
g represents acceleration due to gravity measured in meters per seconds square.
h represents the height measured in meters.
In this scenario, a high diver steps off a diving platform that is 10 meters above the water, if no air resistance is present during the fall there will be a decrease in the driver's potential energy. This is simply because the potential energy of all physical objects is greatly or highly dependent on acceleration due to gravity.
Helppppp
A kangaroo has a maximum gravitational potential energy during one jump of 770 J
When the kangaroo lands on the ground 14% of the maximum gravitational potential energy is transferred to elastic potential energy in one tendon.The tendon has an unstretched length of 35.0 cm
When the kangaroo lands on the ground the tendon stretches to a length of 42.0 cm
Calculate the spring constant of the tendon.
[5 marks]
Show ur working out
Answer:
44000n/m
Explanation:
A wave oscillates with a period of 4.25 X 10-10 s. How many waves will strike a signal detector in 3 seconds?
Answer:
[tex]n=7.05\times 10^9[/tex] waves
Explanation:
Given that,
A wave oscillates with a period of [tex]4.25\times 10^{-10}\ s[/tex]
We need to find the number of waves that will strike a signal detector in 3 seconds.
We know that,
Frequency = (no. of oscillations)/time
Time period = time/(no. of oscillations)
Let there are n waves that will strike
So,
[tex]n=\dfrac{3}{4.25\times 10^{-10}}\\\\=7.05\times 10^9[/tex]
Hence, [tex]7.05\times 10^9[/tex] waves will strike in 3 seconds.
the molecules in a solid state have _______ energy then molecules in a gas state
Answer:
less
Explanation:
hope this helps....................:)
The African bush elephant weights over 8 tons, which is more than the weight of 4 cars! At maximum speed, it can run up to 40 km/h. How long does it take for an elephant running at top speed to go a distance of 10 kilometers?
Answer:
15 mins
Explanation:
What causes the inner core to be solid?
A) Intense heat.
B) Intense pressure.
C) Because it is made of iron.
D) Because of it’s density.
Why should a physical quantity be measured?
Answer:
It allows us to understand nature much more deeply than does qualitative description alone.
Explanation:
Without explaining the measurements, a quantity cannot always be measured.
Hope this helped, and please mark as Brainliest :)
Science project!!! For this assignment, you will ask questions about the factors that have caused a rise in global
temperatures over the past century. Then, you will conduct research to answer your questions. You will
also graph provided information, analyze the graphs, and make conclusions based on the graphs. Finally,
you will write a paper describing the conclusions of your research and graphs
My project is in the file attached, lots of thanks to Maxineishere for helping me with the essay. You may need adobe reader for this as the files are PDF files, I hope you are satisfied! :)
DATE ANSWERED: 5/8/2021
A rocket experiences a 45,000 N force as it accelerates at 30 m/s/s. What is the mass of the rocket?
Answer:
15,00kg
Explanation:
here's your solution
=> force = 45,000N
=> acceleration = 30m/s^2
=> mass = ?
=> Mass = force/acceleration
=> mass = 45,000/30
=> mass = 15,00kg
hope it helps
Which side of the electromagnetic spectrum has shorter wavelengths?
Which side of the electromagnetic spectrum has higher energy?)
Which side of the electromagnetic spectrum has higher frequencies?
Explanation:
hopefully this helps :)
verify the law of moment.
Explanation:
TO VERIFY THE PRINCIPLE OF MOMENTS WHICH STATES THAT IF A NUMBER OF COPLANAR FORCES ACTIING ON A BODY S ,KEEP IT IN EQUILIBRIUM AND THEIR MOMENT ARE TAKEN ABOUT ANY POINT IN THEIR PLANE,THE SUM OF THE CLOCKWISE MOMENTS ,IS EQUAL TO SUM OF ANTICLOCKWISE MOMENT.
please mark me brainlist :)Answer:
TO VERIFY THE PRINCIPLE OF MOMENTS WHICH STATES THAT IF A NUMBER OF COPLANAR FORCES ACTING ON A BODY, KEEP IT IN EQUILIBRIUM AND THEIR MOMENT ARE TAKEN ABOUT ANY POINT IN THEIR PLANE, THE SUM OF THE CLOCKWISE MOMENTS, IS EQUAL TO SUM OF ANTICLOCKWISE MOMENT.
what’s answer? pls help will mark brainliest
8
The range of a target is found to be 20 km. A
shell leaves a gun with a velocity of 500 ms-'.
What must be the angle of elevation of the gun
if the ground is level?
A kangaroo has a maximum gravitational potential energy during one jump of 770 J
Helppppp
When the kangaroo lands on the ground 14% of the maximum gravitational potential energy is transferred to elastic potential energy in one tendon.The tendon has an unstretched length of 35.0 cm
When the kangaroo lands on the ground the tendon stretches to a length of 42.0 cm
Calculate the spring constant of the tendon.
[5 marks]
Show ur working out
Answer:
k = 44000 N/m
Explanation:
Given the following data;
Maximum gravitational potential energy = 770 J
Elastic potential energy = 14% of 770 J = 14/100 * 770 = 107.8 J
Extension, x = 42 - 35 = 7cm to meters = 7/100 = 0.07 m
To find the spring constant, k;
The elastic potential energy of an object is given by the formula;
[tex] E.P.E = \frac {1}{2}kx^{2}[/tex]
Substituting into the equation, we have;
[tex] 107.8 = \frac {1}{2}*k*0.07^{2}[/tex]
[tex] 107.8 = \frac {1}{2}*k*0.0049 [/tex]
Cross-multiplying, we have;
[tex] 215.6 = k*0.0049 [/tex]
[tex] k = \frac {215.6}{0.0049} [/tex]
k = 44000 N/m
The spring constant of the tendon is 44000 N/m.
The following can be depicted from the question:
Elastic potential energy will be:
= 14% × 770J = 107.80 Joule.
The spring constant will be calculated thus:
107.8 = 1/2 × k × 0.07²
107.8 = 0.5 × k × 0.0049
k = 215.6 / 0.0049
k = 44000 N/m.
Therefore, the spring constant of the tendon is 44000 N/m.
Read related link on:
https://brainly.com/question/21163545
Write a one paragraph essay about the importance of the different biomolecules in our life.
Answer:
#tried my bestt
do mark me as brainlist
Biomolecules are made by living organisms and they are made because they are functional. Biomolecules, or at least most of them, do not exist outside of living organisms because they are too complex to be created by chance chemical collisions. The odds of a single average sized protein to form by chance has been calculated at 1 out 10 to the 77th power. Biomolecules REQUIRE intelligent agency to form them.
The four main purposes of biomolecules are:
1. Structure (some proteins)
2. Energy storage and release (carbohydrates)
3. Protective layers (lipids)
4. Information storage and communication (DNA, RNA, endocrines of numerous various types and manipulated molecules, such as fatty acids)
a hole in a copper plate has a diameter of 1.325 cm at 21C°. At what tempreture is the diameter equal to 1.164 cm
Answer:14C
Explanation:
La temperatura de cambio de estado, ¿Puede ser igual para todos los materiales? Justifica comparando dos materiales
Answer:
No.
Explanation:
Para darnos cuenta de esto tenemos que pensar en lo siguiente:
Pensemos en un vaso de vidrio, lleno de agua hasta la mitad, la otra mitad puede ser manteca derretida
Si metemos el vaso en la heladera durante un par de horas, (sabemos que la manteca en la heladera se mantiene sólida) veremos que la manteca se solidificó en la parte de arriba, mientras que el agua sigue líquida.
Entonces encontramos dos compuestos con distintas temperaturas para cambio de fase, pero materiales es más específico, y puede referirse a materiales puros.
Entonces vamos a dos metales:
Primero tenemos una pieza de hierro y una de mercurio en el congelador (supongamos que ambas están a 0°C).
Ahora los sacamos del congelador y los dejamos llegar a temperatura ambiente.
Como bien sabemos, el mercurio es líquido a temperatura ambiente, entonces el mercurio va a sufrir un cambio de fase
Ahora pensemos en el hierro; claramente va a seguir siendo sólido a temperatura ambiente, entonces podemos ver dos materiales cuyo cambio de fase de sólido a líquido ocurre en distintas temperaturas, por lo que podemos concluir que no, la temperatura de cambio de estado no puede ser igual para todos los materiales, y esto se debe a que la estructura atómica de todos los materiales es diferente.
In the nucleus ______________
tell cells what to do and how to change.
Answer:
i believe it is dna
Explanation:
if i remember correctly if the dna tells the cell what to do and how to do it
What are the most essential skills in Team Handball and why?
Answer:
The most important skill in handball is passing or throwing
Explanation:
You need to be able to pass the ball with accuracy. Throwing and shooting drills are normally incorporated into every training session for handball.
Answer:
Explanation:
The most important skill in handball is passing or throwing. You need to be able to pass the ball with accuracy. Throwing and shooting drills are normally incorporated into every training session for handball.
What are some ways that humans depend on the ocean?
Answer:
A lot of the earth oxygen comes from the ocean around 50%-80%
Explanation:
Answer:
fishingswimming/entertainmentthe algae that gives us oxygenwater! It evaporates and gives us rainresearchExplanation:
12. A runner at the start of a race generates 250 W of power as he accelerates to 5 m/s. If the runner has a mass of
60 kg, how long did it take him to reach that speed?
We have that the Time it took him to reach that speed is
t=1.2sec
From the question we are told
A runner at the start of a race generates 250 W of power as he accelerates to 5 m/s. If the runner has a mass of 60 kg, how long did it take him to reach that speed?
Generally the equation for the is mathematically given as
[tex]P=W/t[/tex]
Therefore
[tex]W=Pt\\\\W=250*t[/tex]
Where
[tex]W=f*d\\\\5*60=250*t\\\\t=\frac{5*60}{250}]\\\\t=1.2sec[/tex]
Therefore
Time it took him to reach that speed is
t=1.2sec
For more information on this visit
https://brainly.com/question/21811998
How much heat is required to change 200 mL of ice at -22°C (at typical Freezer temperature) into steam
Answer:
611.064 kJ
Explanation:
Given :
m = 200 mL = 200 g
Specific heat of ice = 2.06 J/g°C
Q = mcΔt
Δt = 0 - (-22) = 22
Q1 = 200 * 2.06 * 22 = 9064 J
Q2 = Melt 0 °C solid ice into 0 °C liquid water:
Q2 = m · ΔHf ; ΔHf = heat of fusion of water = 334j/g
Q2 = 200 * 334 = 66800 J
Q3 : Heat to convert from 0°C to 100°C
Q3 = mcΔt ; c = 4.19 J/g°C ; Δt = (100 - 0) = 100
Q3 = 200 * 4.19 * 100 = 83800 J
Q4: heat required to boil water to steam
Q = m · ΔHv
Hv = heat of vaporization of water = 2257 J/g
Q4 = 200 * 2257 = 451400 J
Total Q = Q1 + Q2 + Q3 + Q4
Q = 9064 + 66800 + 83800 + 451400
Q = 611,064 Joules
Q = 611.064 kJ
A tow truck pulls a 1,100kg car and accelerates at a rate of 3 m/s2. What is the force of the tow truck
Answer:
3300 N
Explanation:
From the question given above, the following data were obtained:
Mass (m) = 1100 Kg
Acceleration (a) = 3 m/s²
Force (F) =?
Force is defined by the following equation:
Force (F) = mass (m) × acceleration (a)
F = m × a
With the above formula, we can obtain the force of the tow truck as follow:
Mass (m) = 1100 Kg
Acceleration (a) = 3 m/s²
Force (F) =?
F = m × a
F = 1100 × 3
F = 3300 N
Therefore, the force of the tow truck is 3300 N
Which combination of elements below results in a metallic bond?
Answer:
there isn't anything else posted to the question when you ask a question put a picture or write it out so people can see it
Explanation:
how to calculate motion
Answer:
Distnace per unit time
Explanation:
Answer:
Newton's second law, which states that the force F acting on a body is equal to the mass m of the body multiplied by the acceleration a of its centre of mass, F = ma, is the basic equation of motion in classical mechanics.
Explanation: