True. An Interactive Voice Response (IVR) system permits a caller to interact with a database of stored information by pressing keys on a telephone pad or speaking words into the phone.
Interactive voice response, or IVR, is an automated telephone system that combines pre-recorded messages or text-to-speech technology with a dual-tone multi-frequency (DTMF) interface to engage callers, allowing them to provide and access information without a live agent. If the IVR system cannot retrieve the information that the caller is looking for, the programmed menu options can provide assistance in routing callers to the appropriate representative for help. By integrating computer and telephony technologies, IVR software can improve call flow and reduce wait times, leading higher overall customer satisfaction.
Moviefone was one of the most famous and successful uses of IVR technology in the 1990s. Since the internet wasn’t as accessible then as it is today, movie-goers would call in and provide their zip code to get a list of available movie theaters near them with their respective movies and show times. While Moviefone is a product of the past, its underlying technology is still leveraged, primarily within call centers, to provide customer support and reduced call volume for customer service representatives.
learn more about Interactive Voice Response (IVR) system here:
https://brainly.com/question/28465085
#SPJ11
The statement "An Interactive Voice Response (IVR) system permits a caller to interact with a database of stored information by pressing keys on a telephone pad or speaking words into the phone" is true.
An Interactive Voice Response (IVR) system is an automated system that allows callers to interact with a computer-controlled phone system by pressing keys on their phone's keypad or speaking words into the phone. The IVR system interacts with a database of pre-recorded or synthesized speech prompts and stored information to provide the caller with the required information or assist them in navigating the system to the desired destination.
For instance, a typical IVR system may ask callers to choose from a menu of options, such as "Press 1 for customer support," "Press 2 for billing," "Press 3 to speak with a live representative," and so on. The caller's input is then recorded and processed by the IVR system, which provides the appropriate response or connects the caller to the desired department or person.
Learn more about IVR here:
https://brainly.com/question/28465085
#SPJ11
which vlan will be configured by default on a switch where no other custom configuration has been performed
VLAN 1 will be configured by default on a switch where no other custom configuration has been performed.
VLAN 1 is the default VLAN on Cisco switches and is automatically created on all switches when they are powered on. It cannot be deleted or renamed, and all switch ports are members of VLAN 1 by default. If no other VLANs are created and assigned to the switch ports, then all traffic will be forwarded within VLAN 1.
However, it is considered best practice to remove all devices from VLAN 1 and use it only for administrative purposes to increase security and reduce the risk of unauthorized access. Instead, network administrators can create and assign VLANs to switch ports based on their specific needs and requirements.
For more questions like Network click the link below:
https://brainly.com/question/15332165
#SPJ11
the software engineering institute (sei) established a new model, called , which incorporates software and systems development into a much larger framework.
The software engineering institute (SEI) established a new model called the Capability Maturity Model Integration (CMMI).
This model incorporates software and systems development into a much larger framework that encompasses the entire organization's processes and practices. The CMMI model provides a set of best practices that can be applied across an organization to improve processes and achieve higher levels of maturity. The model consists of five maturity levels, with each level building on the previous one to provide a roadmap for continuous process improvement. The CMMI model provides a common language for organizations to communicate their process improvement goals and to benchmark their progress against industry standards.
By incorporating software and systems development into a larger framework, the CMMI model enables organizations to achieve greater efficiencies, reduce costs, and deliver high-quality products and services to their customers. The CMMI model has become a widely recognized and respected standard for process improvement in many industries, including aerospace, defense, healthcare, and information technology.
Learn more about Capability Maturity Model Integration here: https://brainly.com/question/28999598
#SPJ11
define cybersquatting. how is it different from cyberpiracy? what type of intellectual property violation does cybersquatting entail?
Cybersquatting refers to the act of registering, using, or selling a domain name that is similar or identical to a trademark or a well-known brand with the intent of profiting from the confusion or traffic generated by the brand. Cybersquatting is different from cyberpiracy in that the latter refers to the act of hacking or hijacking a domain name or website belonging to someone else.
Cybersquatting is considered an intellectual property violation because it involves the unauthorized use of someone else's trademark or brand name. It can result in lost revenue, damage to reputation, and confusion among customers. Many countries have laws in place to prevent cybersquatting and to provide remedies for victims of this practice.
Hi! Cybersquatting is the act of registering, using, or selling a domain name with the intent to profit from the goodwill of someone else's trademark. It is different from cyberpiracy, which involves unauthorized use, reproduction, or distribution of copyrighted material, such as software, music, or movies.
Cybersquatting is a type of intellectual property violation that specifically targets trademarks, as it exploits the similarity between the domain name and a recognized brand or trademark, potentially causing confusion or damage to the brand owner's reputation.
To learn more about Cybersquatting r click on the link below:
brainly.com/question/14388908
#SPJ11
what happens if an assembly instruction starts from the first column? additionally, is it possible to write two assembly instructions on one line?
If an assembly instruction starts from the first column, it indicates that it is the beginning of a new instruction. The first column is usually reserved for labels, which are used to identify a location in the program code. However, if an instruction is placed in the first column, it means that it is not associated with any label and is therefore considered to be a standalone instruction.
As for whether it is possible to write two assembly instructions on one line, it depends on the assembler being used. In some assemblers, it is possible to write multiple instructions on the same line by separating them with a semicolon or a colon. However, this practice is generally discouraged as it can make the code harder to read and maintain. It is recommended to write one instruction per line, starting from the second column after any label.
Hi! An assembly instruction that starts from the first column is interpreted as a regular instruction by the assembler. It is executed accordingly based on the given operation and operands.
As for writing two assembly instructions on one line, it is generally not possible, as assembly language follows a one-instruction-per-line format. Each instruction should be written on a separate line for the assembler to interpret and process them correctly.
If an assembly instruction starts from the first column, it will be interpreted as the beginning of the instruction, and the assembler will attempt to execute it accordingly.
In assembly language, an instruction that starts from the first column is usually considered a label, which is a symbolic name that refers to a memory address in the program code. A label is used to mark a specific location in the code, which can then be referred to by other parts of the code using the label name.
As for writing two assembly instructions on one line, it is generally not possible in most assembly languages. Assembly instructions should be written on separate lines to ensure proper execution and maintain readability. Each line usually represents a single instruction or directive for the assembler to process.
To learn more about assembly language visit : https://brainly.com/question/30299633
#SPJ11
to keep attackers from knowing the directory structure you create on an iis web server, an individual should create what?
To keep attackers from knowing the directory structure on an IIS web server, an individual should create a custom error page and disable directory browsing. This helps prevent unauthorized access and maintains security.
To keep attackers from knowing the directory structure you create on an IIS web server, an individual should create a custom error page that does not reveal any specific details about the directory structure. This can be done by configuring the web server to display a generic error message instead of a detailed error message that might reveal sensitive information about the server's directory structure. Additionally, access controls and permissions should be set up properly to limit the access of attackers to sensitive directories and files. Regular updates and patches should also be applied to the web server software to prevent known vulnerabilities that attackers might exploit.
Learn more about attackers here
https://brainly.com/question/28232298
#SPJ11
To keep attackers from knowing the directory structure you create on an IIS web server, an individual should create a custom error page.
Here are the steps to do so:
1. Open Internet Information Services (IIS) Manager.
2. Navigate to the website or application for which you want to create the custom error page.
3. In the "Features View" pane, double-click "Error Pages."
4. In the "Actions" pane, click "Add" to create a new error page.
5. In the "Add Custom Error Page" dialog box, enter the HTTP status code (e.g., 404 for "Not Found") and the path to your custom error page.
6. Choose the desired response mode: "Execute URL" or "File."
7. Click "OK" to save your settings.
By creating a custom error page, you can prevent attackers from gaining information about your web server's directory structure, thus increasing security.
Learn more about Internet Information Services (IIS): https://brainly.com/question/30784617
#SPJ11
suppose riley trained two neural networks n1 and n2 on the same training data. to decide which network to use at test time, riley proposes to pick the network with the smallest training loss. amari argues that this is a bad idea. who is right? explain briefly.
It is important to Evaluate a model's performance on a separate validation or test set to determine its ability to generalize.
Riley's approach of choosing the neural network with the smallest training loss is not necessarily the best criterion for selecting the best model at test time.
This is because the training loss is not always a reliable indicator of a model's performance on unseen data.
The training loss is calculated by measuring the difference between the predicted outputs and the true outputs for the training data.
It is optimized during training to minimize this difference. However, this doesn't necessarily mean that the model will generalize well to new, unseen data.
A model with low training loss can still overfit to the training data, meaning that it may perform poorly on new data. On the other hand, a model with higher training loss may still be able to generalize well and perform better on unseen data.
Therefore, it is important to evaluate a model's performance on a separate validation or test set to determine its ability to generalize. Amari's argument that selecting a model based on training loss alone is a bad idea is valid, and it is generally recommended to use more comprehensive evaluation metrics such as accuracy, precision, recall, and F1-score to compare models' performance.
To Learn More About Evaluate
https://brainly.com/question/13160822
#SPJ11
at 1200 baud, how long (in mill-seconds) does it take to send one byte, including the 2 framing bits (start, stop bit) for each byte ?
At a 1200 baud rate, it takes approximately 8.33 Milliseconds to send one byte, including the 2 framing bits (start and stop bits) for each byte.
Given a baud rate of 1200 and the need to send one byte with 2 additional framing bits (start and stop bits), we can calculate the time it takes to send this data in milliseconds.
1. First, understand that "baud" refers to the number of signal changes per second. In this case, it's 1200 baud.
2. Determine the number of bits to be transmitted. A byte consists of 8 bits, and you need to include 2 additional framing bits. So, you'll be transmitting 10 bits in total (8 bits for the byte + 2 framing bits).
3. Calculate the time it takes to transmit one bit. Since there are 1200 signal changes per second, you have:
1 second / 1200 baud = 1/1200 seconds per bit
4. Convert the time per bit to milliseconds:
(1/1200 seconds) * 1000 milliseconds/second = 1000/1200 milliseconds per bit ≈ 0.833 milliseconds per bit
5. Determine the time to send 10 bits:
10 bits * 0.833 milliseconds per bit ≈ 8.33 milliseconds
So, at a 1200 baud rate, it takes approximately 8.33 milliseconds to send one byte, including the 2 framing bits (start and stop bits) for each byte.
To Learn More About Milliseconds
https://brainly.com/question/24180453
#SPJ11
a person, place, object, event, or concept in the user environment about which the organization wishes to maintain data refers to a(n): group of answer choices
Answer:
ENTITY: A person, place, object, event, or concept about which the organization wishes to maintain data.
Explanation:
looking at the ascii contents of file1.nc, can you tell that the rijndael-256 algorithm was used to encrypt the file
Looking at the ASCII contents of file1.nc alone would not provide any information about the encryption algorithm used to encrypt the file.
The ASCII contents of a file refer to the characters and symbols present in the file, but they do not reveal anything about the encryption process or algorithm used to protect the file's contents. To determine the encryption algorithm used, one would need access to the encryption key, knowledge of the encryption process, or other relevant information that is not present in the ASCII contents of the file.For such more questions on ASCII
https://brainly.com/question/20361136
#SPJ11
despite his warnings, fred continues to see users transfer files to his linux server using unsecure ftp. how can he stop this?
To stop users from transferring files to Fred's Linux server using unsecure FTP, he can take several steps. First, he should disable the FTP service altogether and use a more secure file transfer protocol such as SFTP or SCP. Second, he can set up a firewall to block all incoming FTP connections.
He can educate the users on the risks of using unsecure FTP and provide them with alternatives. Finally, he can implement security measures such as encryption and user authentication to ensure that only authorized users can access the server and transfer files securely. By taking these steps, Fred can protect his server and prevent unauthorized access and data breaches.
SFTP uses the SSH protocol to establish a secure connection between the client and the server, and then uses the FTP protocol to transfer files between them. This means that the data is encrypted and protected from interception during the transmission, and that the user credentials are verified using public-key cryptography or password authentication.
Learn more about FTP connections: https://brainly.com/question/30360033
#SPJ11
in paging-based systems, it is possible for a process to access memory outside of its page table. group of answer choices true false
True. In paging-based systems, a process can potentially access memory outside of its page table through various means such as pointer arithmetic, buffer overflows, and other memory-related vulnerabilities.
In a paging-based memory management system, each process has its own page table, which maps virtual addresses used by the process to physical memory locations. However, it is possible for a process to access memory outside of its page table in various ways, such as through pointer arithmetic, buffer overflows, and other memory-related vulnerabilities. For example, if a process tries to access an address outside of its page table, the page fault mechanism will be triggered and the operating system will bring the corresponding page into memory. If the process is able to modify the page table, it may also be able to access memory outside of its allocated address space. These potential security vulnerabilities require careful consideration in system design and implementation to ensure the integrity and security of the system.
learn more about paging-based systems here:
https://brainly.com/question/14922758
#SPJ11
as a system administrator, you need to add a static route so that you can reach host 195.156.76.122, 255.255.255.0 and the device eno32 to find the target network. which commands will accomplish this task? (select two. each option is a complete solution).
To add a static Route to reach host 195.156.76.122, 255.255.255.0 and the device eno32, there are two commands that can be used. The first command is "ip route add", which can be used to add a new route.
To use this command, the target network address and subnet mask should be specified, followed by the IP address of the gateway that will be used to reach the target network. The syntax for this command is as follows:
ip route add 195.156.76.122/24 via eno32
The second command that can be used is "route add", which is an older command that can still be used on some systems. This command is similar to the "ip route add" command, but uses a slightly different syntax. To add the static route using this command, the following syntax can be used:
route add -net 195.156.76.122 netmask 255.255.255.0 dev eno32
Both of these commands will accomplish the task of adding a static route to reach host 195.156.76.122, 255.255.255.0 and the device eno32 to find the target network. It is important to note that the specific command to use may depend on the operating system and version being used.
To Learn More About Route
https://brainly.com/question/27935164
#SPJ11
during the process of forwarding traffic, what will the router do immediately after matching the destination ip address to a network on a directly connected routing table entry?
After the router matches the destination IP address to a Network on a directly connected routing table entry during the process of forwarding traffic.
it will perform the following steps:
1. Determine the exit interface: The router identifies the appropriate interface to use for forwarding the traffic to the destination network. This is based on the routing table entry that matches the destination IP address.
2. Update the data link header: The router modifies the data link header of the packet by updating the source and destination MAC addresses. The source MAC address is replaced with the MAC address of the router's exit interface, while the destination MAC address is replaced with the MAC address of the next hop device (if known) or the destination device.
3. Update the Time-to-Live (TTL) field: The router decrements the TTL field in the IP header by one. This prevents packets from looping infinitely in the network.
4. Verify the checksum: The router recalculates the checksum for the IP header to ensure it is correct. If the checksum is invalid, the packet is dropped.
5. Forward the packet: Finally, the router forwards the packet through the exit interface towards the destination network. If the destination MAC address is unknown, the router may perform Address Resolution Protocol (ARP) to obtain the appropriate MAC address before forwarding the packet.
By following these steps, the router ensures that traffic is accurately and efficiently forwarded towards its destination.
To Learn More About Network
https://brainly.com/question/28342757
#SPJ11
given an er diagram with 10 entities, each with 5 attributes, and 5 relationships, each with 2 attributes, how many tables would the corresponding relational scheme have?
The corresponding relational Scheme would have 15 tables.
Given an ER diagram with 10 entities, each with 5 attributes, and 5 relationships, each with 2 attributes, the corresponding relational scheme would have a certain number of tables.
Step 1: Determine the number of tables for entities.
Since there are 10 entities, each with its own set of attributes, you would need one table for each entity. This results in 10 tables.
Step 2: Determine the number of tables for relationships.
In a relational scheme, each relationship usually requires an additional table, especially if the relationship has attributes of its own. Since there are 5 relationships, each with 2 attributes, you would need 5 additional tables to represent these relationships.
Step 3: Calculate the total number of tables.
Combine the tables from entities and relationships. In this case, you have 10 tables for entities and 5 tables for relationships.
Total tables = 10 (from entities) + 5 (from relationships)
Total tables = 15
Therefore, the corresponding relational scheme would have 15 tables.
To Learn More About Relational
https://brainly.com/question/13262352
#SPJ11
question 4 an unhappy systems administrator installed malware that attacked after a timed event, rather than when it was installed. what type of malware does this describe
The Malware described in your question is a logic bomb, installed by a disgruntled systems administrator, and activated based on a timed event rather than immediately upon installation.
It sounds like you're describing a type of malware called a logic bomb. A logic bomb is a type of malicious software that activates when specific conditions or a timed event occurs, rather than being triggered by the installation process itself. In this scenario, the unhappy systems administrator installed the logic bomb on the targeted system, and it remained dormant until the specified event or time took place.
When the set conditions were met, the logic bomb activated and caused harm to the system or data. Logic bombs can be used to delete or corrupt files, disrupt system operations, or even grant unauthorized access to the system for further attacks. These malicious programs can be difficult to detect and prevent since they lay dormant until activated by their triggering event.
To summarize, the malware described in your question is a logic bomb, installed by a disgruntled systems administrator, and activated based on a timed event rather than immediately upon installation. This type of malware can cause significant damage to the targeted system and is challenging to detect before it is triggered.
To Learn More About Malware
https://brainly.com/question/399317
#SPJ11
a products table and an orders table have several linked records that are joined by a cross-referencing table named productsorders. what kind of table relationship do these tables demonstrate?
The tables demonstrate a many-to-many relationship, where a product can be associated with multiple orders and an order can contain multiple products.
The cross-referencing table named productsorders is used to connect the two tables and hold the foreign keys from both tables to establish the relationship. In a many-to-many relationship, each record in one table can be associated with multiple records in another table, and vice versa. This type of relationship requires a cross-referencing table to link the two tables together.
For example, in this scenario, a single order may contain multiple products, and a single product may be included in multiple orders. The "productsorders" table would contain records that link each product to the order(s) in which it was included.
Learn more about many-to-many relationship: https://brainly.com/question/13437434
#SPJ11
which of the following has an impact on packet jitter?group of answer choicesencoding delaydecoding delaythe type of multimedia applicationnetwork conditions such as buffer sizes, queueing delays, network congestion levels
Packet jitter, also known as delay variation, is impacted by several factors including encoding delay, decoding delay.
The type of multimedia application, and network conditions such as buffer sizes, queueing delays, and network congestion levels.
1. Encoding delay: The time it takes to convert raw data into a digital format that can be transmitted over a network. Different encoding methods may require varying amounts of time, affecting packet jitter.
2. Decoding delay: The time it takes to convert the received digital data back into its original format at the receiving end. This process can introduce variations in delay, contributing to packet jitter.
3. Type of multimedia application: Different applications have distinct requirements for data transmission rates and timing. For example, real-time applications like video conferencing need low jitter, while non-real-time applications like file transfers can tolerate higher jitter levels.
4. Network conditions: Factors such as buffer sizes, queueing delays, and network congestion levels can impact packet jitter. Large buffer sizes may increase delay, while network congestion can cause packets to experience varying queueing delays. In turn, these variations can result in packet jitter.
To Learn More About Packet jitter
https://brainly.com/question/30074103
#SPJ11
a stable sorting can only sort an array of unique values. (True or False)
A stable sorting can only sort an array of unique values.
False.
A stable sorting algorithm is a sorting algorithm that maintains the relative order of equal elements in the sorted array. This means that if two elements have the same value, their relative order in the original array will be preserved in the sorted array. However, the presence of duplicate values does not affect the stability of the sorting algorithm. The stability of the algorithm depends on the algorithm itself, not on the values in the array. So, a stable sorting algorithm can sort an array with duplicate values and still maintain the relative order of equal elements.In fact, many stable sorting algorithms, such as merge sort and insertion sort, are well-suited for sorting arrays with duplicate values because they can handle them without losing stability.Therefore, it is not necessary for the array to contain only unique values in order to use a stable sorting algorithm. The presence of duplicates does not affect the stability of the algorithm, and the algorithm will still be able to sort the array while maintaining the relative order of equal elements.For such more questions on stable sorting algorithm
https://brainly.com/question/31480169
#SPJ11
some amd processors include embedded gpu capabilities. what are these chips called
The AMD processors that include embedded GPU capabilities are called APU (Accelerated Processing Unit) chips.
An embedded GPU (Graphics Processing Unit) is a graphics processor that is integrated into a larger system-on-a-chip (SoC) or central processing unit (CPU). These GPUs are designed to provide graphics processing capabilities for devices such as mobile phones, tablets, and other embedded systems where low power consumption and small form factor are critical factors.
These chips combine both the CPU and GPU on a single chip, providing enhanced performance and energy efficiency for systems that require both processing and graphics capabilities.Embedded GPUs are optimized for specific applications and are designed to work within the power constraints of the device they are integrated into. They can provide high-quality graphics performance for tasks such as gaming, video playback, and image processing. The use of embedded GPUs allows manufacturers to create smaller, more power-efficient devices without sacrificing graphics performance.
To know more about GPU,
https://brainly.com/question/30425751
#SPJ11
AMD processors that include embedded GPU capabilities are called APUs (Accelerated Processing Units). These chips combine a central processing unit (CPU) and a graphics processing unit (GPU) on a single die, providing an all-in-one solution for computing and graphics needs.
For such more questions on AMD processors
https://brainly.com/question/30392484
#SPJ11
________ consists of translating the internal-level schema into the actual database structures
that will be
implemented in the new system.
A) Systems analysis
B) Conceptual design
C) Physical design
D) Implementation and conversion
C) Physical design.
Physical design involves taking the internal-level schema and mapping it to the actual physical database structures that will be implemented in the new system. This includes decisions about data storage, indexing, file organization, and other aspects of the physical database implementation.
The physical design phase involves mapping the logical schema to physical structures and specifications such as file organization, indexing, and data storage. The goal of physical design is to ensure that the database is optimized for efficient data access and retrieval, and that it can accommodate the expected workload.
The physical design phase is also responsible for determining the hardware and software requirements for the new database, including choosing the appropriate database management system (DBMS) and database server to run it on.
Overall, the physical design phase is an important step in the database development process, as it lays the foundation for the actual implementation of the database system.
Learn more about database system here:
https://brainly.com/question/26732613
#SPJ11
able wants to send a file to baker over the internet and protect the file so that only baker can read it and verify that it came from able. what should able do?
By following these, Able can successfully send a protected file to Baker and allow Baker to verify its origin.
Encrypt the file, Use digital signatures, Share the public key ,Send the encrypted file and signature, Decrypt and verify
What should able do to send a file to Baker over the internet and protect the file?To send a file to Baker over the internet and protect the file so that only Baker can read it and verify that it came from Able, Able should do the following steps:
Encrypt the file: To protect the file, Able should use encryption software or tools to encrypt the file with a strong encryption algorithm. This will ensure that only Baker, who has the decryption key, can read the file.
Use digital signatures: To verify that the file came from Able, a digital signature should be used. Able can create a digital signature using a private key, which is then attached to the encrypted file.
Share the public key: Able should share the public key with Baker. The public key is used by Baker to verify the digital signature and confirm that the file came from Able.
Send the encrypted file and signature: Able can now send the encrypted file and digital signature to Baker over the internet.
Decrypt and verify: Upon receiving the file, Baker will use the shared public key to verify the digital signature, confirming the file came from Able. Then, Baker will decrypt the file using the decryption key to access the contents.
By following these, Able can successfully send a protected file to Baker and allow Baker to verify its origin.
Learn more about Encrypt.
brainly.com/question/8455171
#SPJ11
in a paging-based system, there is one page table associated with every process. group of answer choices true false
The given statement "In a paging-based system, there is one page table associated with every process" is true. As in a paging-based memory management system, each process has its own virtual address space divided into fixed-size pages, and the physical memory is divided into frames of the same size.
The page table is a data structure that maps the virtual pages of a process to their corresponding physical frames in the memory.
Each process has its own page table, which is used by the memory management unit to translate virtual addresses to physical addresses. Therefore, there is one page table associated with every process, and each page table is unique to the process it belongs to.
In summary, the given statement is true because each process has its own page table that is used to translate virtual addresses to physical addresses in a paging-based memory management system.
For more questions like Management click the link below:
https://brainly.com/question/11599959
#SPJ11
The small caps effect and expanded spacing are applied to characters using the ___ dialog box.
Paragraph
Font
Style
Character
In certain applications or software programs, such as word processors or graphic design tools, users can apply various formatting options to text or graphical elements. These options can be accessed through various dialog boxes or panels, depending on the specific software.
The small caps effect refers to a style where all the letters in a word are displayed in capital letters, but the capital letters are smaller in size than the regular capital letters. This effect can be applied to selected text using the Character dialog box, which allows users to modify various properties of the text, such as font, size, style, and effects.
Expanded spacing, on the other hand, refers to a style where the spaces between letters in a word are increased, making the word appear wider or more spaced out. This effect can also be applied using the Character dialog box in some software programs.
Learn more about software programs here:
https://brainly.com/question/2553593
#SPJ11
the characteristic rapid edits, creative camera angles, compressed narratives, and staged performances of what television channel heavily influenced the advertising industry in the mid-1980s?
The characteristic rapid edits, creative camera angles, compressed narratives, and staged performances that heavily influenced the advertising industry in the mid-1980s can be attributed to the MTV channel.
MTV revolutionized the way commercials were produced, with its music videos showcasing quick cuts, stylized visuals, and imaginative concepts that translated into advertising. The channel's impact was profound and lasting, ushering in a new era of slick, eye-catching ads that were more akin to mini-music videos than traditional commercials.
MTV is an acronym for Music Television. MTV is a cable television network that started out as a 24-hour music video platform.
The 1989 release of Madonna's "Like a Prayer" video is only one prominent instance of how MTV established a reputation for challenging cultural norms and taste. The MTV Music Video Awards were introduced by the channel in 1984, and the MTV Movie Awards followed in 1992.
To know more about MTV channel, click here:
https://brainly.com/question/30790188
#SPJ11
you are working in hyper-v manager on a system that hosts several windows server 2008 r2 virtual machines. you create snapshots of these virtual machines nightly as part of your disaster recovery plan. users are complaining that they can no longer access the virtual servers. in hyper-v manager, they are identified as being in a paused-critical state. what should you do? (select two. each answer is a part of the overall solution.)
1. Unpause the virtual machines: In Hyper-V Manager, right-click on the paused virtual machine and select "Resume" to unpause it. This should allow users to access the virtual servers again.
2. Investigate the cause of the critical state: Check the Event Viewer on the host machine and the virtual machines to see if there are any error messages or warnings that could explain why the virtual machines were paused in a critical state. Address any underlying issues to prevent this from happening again in the future.
To address the issue of virtual servers being in a paused-critical state in Hyper-V Manager, you should try two solutions:
Attempt to resume the virtual machines from the paused-critical state.If resuming fails, then you should revert to the most recent snapshot of each virtual machine to restore their previous states.When virtual servers are in a paused-critical state, it means that the virtual machine has been paused due to a critical error or issue, and it cannot continue running until the issue is resolved. This is why users are unable to access the virtual servers. To address this issue, you can try to resume the virtual machines from the paused-critical state.
If this doesn't work, then you should consider reverting to the most recent snapshot of each virtual machine to restore their previous states. Reverting to the most recent snapshot is a common solution when there is a critical issue with the virtual machine, as it allows you to roll back to a previous state when the virtual machine was functioning correctly.
However, it's important to note that reverting to a snapshot will erase any changes made to the virtual machine since the snapshot was taken.
For more questions like Servers click the link below:
https://brainly.com/question/30168195
#SPJ11
you have a network with two routers as shown. router a currently has a single static route to network 10.0.155.80/28. you need to add another subnet to router b. this subnet should also use a 28-bit mask. you would like to replace the existing static route to network 10.0.155.80/28 with a single summarized static route that includes the old network and the new network. you want to minimize wasted addresses. what should you do? (select two.)
To add another subnet to Router B and summarize the static route, you should:
1. Add the new subnet to Router B and configure a static route to that subnet using a 28-bit mask.
2. On Router A, replace the existing static route to network 10.0.155.80/28 with a summarized static route that includes the old network and the new network using a 26-bit mask.
This will allow both subnets to use the same summarized static route while minimizing wasted addresses. Adding a new subnet to Router B involves creating a new network address and configuring the necessary settings on the router to enable communication with devices on that subnet.
This involves adding a static route to the routing table of Router B that specifies the new subnet's network address and mask, as well as the next hop address of Router A's interface that is connected to the new subnet.
This is for answering the question "you would like to replace the existing static route to network 10.0.155.80/28 with a single summarized static route that includes the old network and the new network. you want to minimize wasted addresses. what should you do?"
Learn more about static route: https://brainly.com/question/6783973
#SPJ11
____ is an abstract class for reading character streams.
a. System.out
b. Reader
c. System.err
d. OutStream
b. Reader is an abstract class for reading character streams.
An abstract class is a template definition of methods and variables in a specific class, or category of objects. In programming, objects are units of code, and each object is made into a generic class. Abstract classes are classes that contain one or more abstracted behaviors or methods.An abstract class is a template definition of methods and variables in a specific class, or category of objects. In programming, objects are units of code, and each object is made into a generic class.
Abstract classes are classes that contain one or more abstracted behaviors or methods. Objects or classes can be abstracted, which means that they're summarized into characteristics relevant to the current program's operation. Abstract classes are used in all object-oriented (OOP) languages, including Java, C++, C# and VB.NET.
learn more about abstract class here:
https://brainly.com/question/13072603
#SPJ11
Reader is an abstract class in Java that serves as the superclass for all classes that read characters from a stream.
In Java, Reader is an abstract class for reading character streams, which provides a framework for reading characters from various sources such as files, network connections, or other input streams.
The Reader class is an abstract class, which means that it cannot be instantiated directly but must be subclassed to be used. Subclasses of Reader include FileReader, which is used to read characters from a file, and InputStreamReader, which is used to read characters from an input stream.
System.out and System.err are not related to reading character streams but are used for writing output and error messages to the console, respectively.
OutStream is not a valid class in Java, so the correct answer is (b) Reader.
Learn more about java here:
https://brainly.com/question/30354647
#SPJ11
an advertisement company builds a profile of a user based on their browsing history across many websites and uses that profile to create more targeted advertisements. which technology enables the company to aggregate the user's browsing history across multiple sites?
The technology that enables an advertisement company to aggregate a user's browsing history across multiple sites is known as tracking cookies. Tracking cookies are small pieces of data that are placed on a user's computer when they visit a website.
These cookies allow websites to remember a user's preferences and settings, but they can also be used to track a user's browsing activity across multiple sites.Advertisement companies can use tracking cookies to build a profile of a user based on their browsing history. This profile can include information such as the websites a user has visited, the products they have searched for, and the content they have interacted with. With this information, advertisement companies can create more targeted advertisements that are tailored to the user's interest and preferences.While tracking cookies can be useful for advertisers, they have also raised concerns about user privacy. Some users may not want their browsing history to be tracked, and some countries have enacted laws to protect user privacy. As a result, many web browsers now allow users to block or delete tracking cookies, and advertisement companies must be transparent about their use of tracking technology.For such more question on tracking cookies
https://brainly.com/question/29556992
#SPJ11
My password is a number between 10,000,000 and 11,000,000. I know, I know, that's weak" you say. At least its 8 characters? Can you guess it?
PLSSSSSSS HELP
The Default Domain Policy is linked to the domain object and specifies default settings that affect all users and computers in the domain.
True or false
True, the Default Domain Policy is linked to the domain object and specifies default settings that affect all users and computers in the domain.
Computers are electronic devices that process, store, and transmit data and information. They are capable of performing a wide range of tasks, from simple calculations to complex simulations and data analysis. Computers consist of various hardware components, such as a central processing unit (CPU), memory, storage, input/output devices, and network interfaces. Software programs, including operating systems, applications, and utilities, allow users to interact with computers and perform tasks such as word processing, web browsing, and video editing. Computers have become an integral part of modern life, used for work, entertainment, communication, and education. Advances in computer technology have led to the development of mobile devices, artificial intelligence, and the internet, changing the way people interact with technology and each other.
Learn more about computers here:
https://brainly.com/question/15707178
#SPJ11
The statement "The Default Domain Policy is linked to the domain object and specifies default settings that affect all users and computers in the domain" is true. The Default Domain Policy sets the baseline security settings for users and computers in the domain, and it is linked to the domain object.
The Default Domain Policy is a Group Policy Object (GPO) that is linked to the domain object in Active Directory and applies to all users and computers in the domain by default. The settings configured in the Default Domain Policy affect the security and behavior of the domain, including password policies, account lockout policies, and other security-related settings. These settings can be modified to meet the specific needs of an organization, but should be done carefully to ensure that the security and stability of the domain are not compromised.
To know more about Default Domain Policy visit:
https://brainly.com/question/27960381
#SPJ11