An object has a mass of 10grams and a volume of 20m3. what is the density of the object​

Answers

Answer 1

Explanation:

density = mass/ volume

in the question the mass is given in grams so will convert it into kg,

10 g = 0.01 kg

density= 0.01/ 20 = 1 / 2000 = 0.005 kg/m^3


Related Questions

My next photo How's it​

Answers

Answer:

Pretty good

Explanation:

is there nxt 1

A 2400W electric toaster is connected to a standard 120 V wall outlet. A family
measured their monthly toaster usage to be 6.5 hrs.
6
1) How much electrical energy (in kilowatt hours - kWh) did the toaster dissipate
during the measured month? (round to 1 decimal place & do not include units)
2) If the local power company charges $0.13/kWh, then calculate (in $) the monthly
total cost of this toaster. (round to 2 decimals & do not include units)

Answers

Answer:

1) 15.6

2) 2.03

Explanation:

The power output of the electric toaster, P = 2,400 W

The voltage rating of the power outlet, V = 120 V

The number of hours the toaster is used during a month = 6.5 hours

1) Electrical energy, E = Electrical power, P × Time, t

The electrical energy dissipated by the toaster, 'E', is given as follows;

E = 2,400 W × 6.5 hrs = 15,600 Wh = 15.6 kWh

The electrical energy dissipated by the toaster, during the measured month in kWh, E = 15.6

2) Let 'C' represent the monthly cost of toaster and let 'B' represent the amount charged by the local power company, we have;

The charges for (electrical) power by the local power company, B = $0.13/kWh

The monthly cost of the toaster, C = E × B

∴ C = 15.6 kWh × $0.13/kWh = $2.028

By rounding off to 2 decimals, the monthly cost of the toaster (in $), C ≈ 2.03.

You push down on a 3 N box for 5 minutes. How much work was done?

Answers

Answer:

none. 0. for work to be done the object has to have displacement, and even though you were exerting force, the box did not move and s work is o it could also be 50 but I'm sure it is 0

Explanation:

Answer here I’m so sorry

You are trying to get a sailboat to land on the shore. Do you think it would it be easier during the day or night and why?

Answers

Answer:

Day

Explanation:

Day because the tides wouldn't be as strong

Answer:night

Explanation:

high tide or whichever one is the tide closer to shore

How much work is done when 300 N of force is used to lift the dog 1.5 m?

Answers

Answer:

450N

Explanation:

Work done=Force*distance

How is it possible a plant can sustain itself for 70 years locked inside a jar ?

Answers

Answer:

If you are talking about the experiment in which mouse and plants are kept in a closed glass jar in sunlight so in that case, they both survive because the CO2 released by the respiration of mouse is being utilized by the plants and fixed ( phosynthesis) and O2 is released as by product, which is taken by the mouse for respiration.

A 1200 kg car accelerats from reat to 10.0 m/s in a time of 4.50 seconds. Calculate the force that thr car's tires exerted on the road.​

Answers

Answer:

2667 N

Explanation:

Method 1: Impulse

We can solve this problem by using the impulse formula.

FΔt = mΔv  Δt = time interval, m = mass of the car (kg), Δv = change in velocity

We have three known variables, so we can solve for the fourth: F.

Divide Δt from both sides to isolate F.

F = (mΔv)/Δt  

Substitute known values into the equation.

F = [(1200 kg)(10 m/s -  0 m/s)] / 4.5 s F = [(1200)(10)]/4.5 F = 12000/4.5 F = 2666.666667 N

The force that the car's tires exert on the road is 2667 N.

Method 2: Newton's Second Law

The force that the car's tires exert on the road is equivalent to the force that the road exerts on the car due to Newton's Third Law of Motion.

We can calculate the force that the car's tires exert on the road by using the formula F = ma, which was derived from Newton's Second Law of Motion.

F = ma F = force exerted on the car, m = mass of the car (kg), a = acceleration of the car (m/s²)

We are given the mass of the car, velocity of the car, and the time in which it accelerated.

We can use this equation for acceleration:

a = Δv/Δt Δv = final velocity - initial velocity (change in velocity), Δt = time interval

The car started from rest, meaning it had an initial velocity of 0 m/s. Its final velocity was 10 m/s. The time that it took for the car to go from 0 m/s to 10 m/s was 4.5 seconds.

a = (10 m/s - 0 m/s) / 4.50 s a = 10/4.5 a = 2.222... m/s²

Now we have two known variables, mass and acceleration. We can solve for the force exerted on the car (and thus, the force the car exerts on the road) using the formula F = ma.

F = ma F = (1200 kg)(2.222... m/s²) F = 1200 · 2.222...F = 2666.666667 N

The force that the car's tires exert on the road is 2667 N.

A plastic rod becomes negatively charged when it is rubbed with a piece of wool. How does the rod become charged?

Electrons move from the rod to the wool.
Protons move from the rod to the wool.
Electrons move from the wool to the rod.
Protons move from the wool to the rod.

Answers

Electrons move from the wool to the rod.

BEcause if they move from wool to rod, the rod has more number of electrons now. Hence making it negatively charged

The plastic rod becomes charged when electrons move from the wool to the rod to become negatively charged. Details about charge can be found below.

What is electronegativity?

Electronegativity is the tendency, or a measure of the ability, of an atom or molecule to attract electrons and thus form bonds.

According to this question, a plastic rod becomes negatively charged when it is rubbed with a piece of wool.

An atom becomes negatively charged when it gains electrons from another atom, hence, it can be said that the plastic rod becomes charged when electrons move from the wool to the rod to become negatively charged.

Learn more about charge at: https://brainly.com/question/19886264

#SPJ2

A turtle swimming in a straight line toward shore has a speed of 0.50 m/sec. After 4.0 seconds, its speed is at 0.90 m/sec. What is the turtle's acceleration?​

Answers

Answer:

0.1m/s²

Explanation:

Using the equation of motion

V = u+at

V is the final speed = 0.9m/s

Initial speed u = 0.5m/s

Time = 4secs

Get the acceleration

0.9 = 0 5+4a

0.9-0.5 = 4a

0.4 = 4a

a = 0.4/4

a = 0.1m/s²

Hence the acceleration is 0.1m/s²

A step down transformer has a primary coil consisting of 700 tons and a secondary coil consisting of 300 times. What is the potential difference in the second circuit, if the primary coil is supplied with an effective AC potential difference of 110 V?

Answers

Answer is 47.14 v

by the relation

[tex]\frac{V out}{V in } = \frac{N secondary}{N primary }[/tex]

Find the formula and scientific units of the following:

Speed =

Velocity =

Momentum =

Velocity =

Acceleration =

Force =

Answers

Answer:

speed :m/s

velocity:m/s-¹

acceleration:m/s²

force:kgms-²

Explanation:

I hope May be correct

Speed: It is the rate at which object covers or travelled particular distance or rate at which objects changes its position. S.I. unit for speed is metre per second (m/s).

Speed (s) = distance (d) / time (t)

Velocity: Distance covered by a moving object in a particular direction per unit time. S.I. unit of velocity is m s-1 or m/s.

Velocity (v) = Total displacement (d) / time take(t)

Momentum: It is quanity of motion of the object. S.I. Unit is Kg.m.s-1

Momentum (p) = Mass (m) X Velocity (v)

Acceleration: Rate at which an object velocity changes with respect to time. S.I. unit is metres/second2 (m/s2) Acceleration (a) = Change in velocity/ time taken

Force: When an object changes it position or direction due to external agent. S.I. unit of force is (Kg m/s2).

Force (F) = Mass(m) × Acceleration (a)

To learn more about following terms:

https://brainly.ph/question/122934

What words go in the missing blanks?

An object with less ____ and ____. Will be easier to move.

Answers

I would say mass, and weight.

a 60m long train moving on a straight
level track passes a pole in 5 seconds. find the
speed of the train and the time it will take to cross a
540m long bridge.​

Answers

Explanation:

part 1.

s=60m

t=5s

v=s/t. =60/5 =12m/s

part 2

total s= 540+60. =600m

v=12m/s

t=s/v. =600/12 =50s

A reaction occurs in which a neutron strikes the nucleus of a uranium-235 atom, forming a krypton-92 atom, a barium-141 atom, and three neutrons. Is this a chemical reaction or a nuclear reaction, and how do you know?
A. This is a nuclear reaction, because the atom's nucleus changed.
B. This is a nuclear reaction, because thorium is a product.
C. This is a chemical reaction, because products formed.
D. This is a chemical reaction, because only the electrons were rearranged.

A P E X

Answers

Answer:

A This is a nuclear reaction, because the atoms nucleus changed.

Which of the following actions will decrease the gravitational force between two objects?

Increasing the mass of the objects
Increasing the density of the objects
Increasing the distance between the objects
Increasing the temperature of the objects

Answers

Answer:

option 3 increasing the distance between the objects

A student pushes a box to the right with a force of 10 N. At the same time, another
student pushes the same box to the left with a force of 5N.
What is the net force

Answers

Answer:

5 N

Explanation:

To find the net force of 2 objects pushing against each other you subtract them and that’s how you get your answer.

The net force acting on a system is defined as the resultant of all the force acting on all the body. The value of net force will be 5N.

What is force?

Force is defined as the push or pull applied to the body. Sometimes it is used to change the shape, size, and direction of the body. Force is defined as the product of mass and acceleration. Its unit is Newton.

The given data in the problem will be;

F₁ is the force act to the right = 10 N

F₂ is the force act to the left= 5N

F is the net force=?

According to the equilibrium concept, the net force acting on the body is equal to zero.

F = F₁  -  F₂

F = 10-5

F = 5N

Hence the value of net force will be 5N.

To learn more about the force refer to the link;

https://brainly.com/question/26115859

PLEASE HELP ME
Which refers to the amount of energy in a sound wave per unit of time and is also related to the loudness of a sound? period compression amplitude intensity

Answers

Answer: Thanks for the points!

Explanation:  The average amount of energy passing through a unit area per unit of time in a specified direction is called the intensity of the wave. As the amplitude of the sound wave increases, the intensity of the sound increases. Sounds with higher intensities are perceived to be louder.

Answer:

Amplitude

Explanation:

¿Qué pasa en nuestro cerebro cuando tomamos decisiones? Ejemplo: Estoy tocando una plancha caliente, y saco la mano rápidamente, ¿que paso en mi cerebro?

Answers

Answer:

Debido a la información de las neuronas sensoriales al cerebro.

Explicación:

Cuando toco una plancha caliente, extiendo la mano rápidamente porque las neuronas sensoriales presentes en la piel de nuestro cuerpo envían señales al sistema nervioso central, es decir, al cerebro. El cerebro toma decisiones de acuerdo con los estímulos y envía instrucciones a través de las neuronas motoras a los músculos para retirar las manos del hierro caliente a fin de evitar efectos nocivos en la piel debido al calor. El lóbulo frontal es una parte del cerebro que controla la personalidad, la toma de decisiones y el razonamiento.

Reo performed an experiment to investigate the strength of an electromagnet and the amount of force that would be affected by the size of the current flowing through its coils. Which of the following changes would increase the current flow the most?

a. Decreasing the number of paper clips being picked up
b. Decreasing the number of coils of wire wrapped around the nail
c. Increasing the voltage power supply
d. Increasing the number of nails



(WILL GIVE BRAINLIEST)

Answers

Answer:

b. Decreasing the number of coils of wire wrapped around the nail

it can cause an electrical current running through it creates a magnetic field.

An electromagnet is a device that uses an electric current to produce a magnetic field.

Electromagnets are typically composed of a piece of metal wrapped with wire and connected to a battery. The battery provides the electric current, and the loops or coils of wire enhance the magnetic field. The more loops there are, the stronger the magnetic field.

When electric current flows through the electromagnet, the metal core becomes magnetized, so it possesses a north pole and a south pole.

Motors place electromagnets inside of permanent magnets as shown below.



However, motors are designed so that the polarity of the electromagnet constantly flips. That is, the north pole becomes the south pole, and the south pole becomes the north pole, every time the electromagnet turns 180 degrees.

Why is it designed this way?
A.
to conserve the energy in the battery
B.
to constantly polarize the field magnet
C.
so the electromagnet will continuously turn
D.
so the magnetic field will get stronger

Answers

The reason why motors are designed so that the polarity of the electromagnet constantly flips.is

C. so the electromagnet will continuously turn

Why is motor designed that way

The reason motors are designed so that the polarity of the electromagnet constantly flips is to continuously turn the electromagnet. This allows the motor to rotate continuously, rather than becoming stuck in one position.

The flipping of the polarity causes the electromagnet to attract and repel from the permanent magnets, creating a rotating motion.

Therefore, the correct answer is C.

Learn more about motors at:

https://brainly.com/question/18619348

#SPJ1

The downward force acting on an object in free fall is the force of ___________​

Answers

it’s gravitational force

1 hp is equal to? What is the answer​

Answers

The electrical equivalent of one horsepower is 746 watts in the International System of Units (SI), and the heat equivalent is 2,545 BTU (British Thermal Units) per hour. Another unit of power is the metric horsepower, which equals 4,500 kilogram-metres per minute (32,549 foot-pounds per minute), or 0.9863 horsepower.

According to Hooke's law, the force exerted by a compressed or stretched spring is proportional to...

Answers

Answer:

Hooke's law can be written as:

F = -k*Δx

Where k is a constant that depends on the spring, called the spring constant.

And Δx = (x - x₀) is the displacement of the spring with respect to the rest position x₀

And a proportional equation is something like:

y = c*x

Where c is a constant of proportionality.

In the case of Hooke's law, the constant is K, then the force is proportional to the displacement of the spring with respect to the rest position Δx.

Every chemical compound is unique and different from the ____________________ it contains.
a.
molecules
c.
elements
b.
hydrogen
d.
gas

Answers

Answer:

C is your answer fam.

Explanation:

If you increase the frequency of a sound wave four times, what will happen to its speed?
A. The speed will increase four times.
B. The speed will decrease four times.
C. The speed will remain the same.
D. The speed will increase twice.
E. The speed will decrease twice.​

Answers

Answer:

d

Explanation:

Which statement best describes Cleo's mistake? Light travels through air and water in angled, scattered paths. Light does not change direction when it moves from air into water. Light slows down when it moves from air into water. Light bends away from the normal when it moves from air into water.

Answers

The question (obtained from the internet);

Cleo stated that light travels through air in straight paths, and when it moves from air to water, light changes direction, speeds up, and bends towards the normal

Answer:

The statement that best describes Cleo's mistake is;

Light slows down when it moves from air into water

Explanation:

The question;

Cleo stated that light travels through air in straight paths, and when it moves from air to water, light changes direction, speeds up, and bends towards the normal

The speed of light in water = 225,000 km/s

The speed of light in air = 299,702,547 m/s

The speed of light in vacuum = 299,792,458 m/s

Therefore, light slows down when it moves from a less dense medium to a denser medium

Light moves closer (bends) towards the normal when it moves from air into water. Light therefore, changes direction, and light moves in straight path which is known as rectilinear motion

Therefore, the statement that describes Cleo's mistake is that light actually slows down when it moves from air into water.

If a body is thrown up with an initial velocity 'u' and covers a maximum height of 'h' , then 'h' is equal to u²/2g
Explain in detail.​

Answers

Answer:

1/2 m u^2     initial Kinetic Energy of body

m g h        Potential Energy body attains as it rises to height

1/2 m u^2 = m g h      conversion of KE to PE

h = u^2 / ( 2  g)

Electricity and magnetism are? Regulated by one force with positive and negative charges Two separate forces Both of the above

Answers

Answer:

two separate forces

Explanation:

Electricity and magnetism are two separate forces. However, they come together in a field called electromagnetism. Both types of forces are linked; a moving magnet may push electric charges and trigger electric current. Objects which have both positive and negative charges are mutually repulsive to each other, and those with opposite charges are mutually attractive.

define the natural fibre​

Answers

Spider webs is natural fiber or what caterpillars use to make they nests

Natural fibers or natural fibres are fibers that are produced by plants, animals, and geological processes. They can be used as a component of composite materials, where the orientation of fibers impacts the properties. Natural fibers can also be matted into sheets to make paper or felt.

True or false blood gets oxygen and releases carbon dioxide in the heart

Answers

Answer:

FALSE

Explanation:

You breath in oxygen and your blood takes it through your body then you breath it out as carbon dioxide

Other Questions
How to say i am in german is this rational or irrational? True or False. The Magnitude of the induced voltage in a coil of wire depends on how quickly the magnetic flux through the coil of wire changes. What is Measure of Center in a simple definition? Consider a wheel (solid disk) of radius 1.12 m, mass 10 kg and moment of inertia 1 2 M R2 . The wheel rolls without slipping in a straight line in an uphill direction 37 above the horizontal. The wheel starts at angular speed 12.0536 rad/s but the rotation slows down as the wheel rolls uphill, and eventually the wheel comes to a stop and rolls back downhill. How far does the wheel roll in the uphill direction before it stops? Describe how water travels through a watershed. NO LINKS!!!!!! Help its urgent, PLEASE HELP!!!!!!!!!!!!!!!! plsss beggg i need this right now. deadline now at 6:00 pm and it's 5:03 here so please answer this :( The Berlin blockade after World War II showed Europeans that the USSR wanted to challenge the United Nations to see if it was willing to take action. was serious about expanding its area of control in Eastern Europe. would be able to set the Allied powers against one another. would be able to swiftly defeat the Allied powers in any altercation. Find the slope!19.) (-3, 4) and (-4,-2) Can someone explain how to do this LAB: Output values below an amount - methods Write a program that first gets a list of integers from input. The input begins with an integer indicating the number of integers that follow. Then, get the last value from the input, and output all integers less than or equal to that value. Assume that the list will always contain less than 20 integers. Ex: If the input is: 5 50 60 140 200 75 100 the output is: 50 60 75For coding simplicity, follow every output value by a space, including the last one. Such functionality is common on sites like Amazon, where a user can filter results. Write your code to define and use two methods: public static void getUserValues(int[] myArr, int arrSize, Scanner scnr) public static void outputIntsLessThanorEqualToThreshold (int[] userValues, int userValsSize, int upperThreshold) Utilizing methods will help to make main() very clean and intuitive. write a definition for cell, tissue, organ, and organ system. Give an example of each of these in your body. Natural Resources and Economies of South AsiaPracticeActive810Using four or more complete sentences, discuss two similarities and two differences between the economies of India andSingapore. Make sure you use examples to support your response. Help please! No links! For the following box plot, determine whether the given numbers would be considered outliers. (Use the "IQR X 1.5" method.) A. A height of 61 in. B. A height of 69 in. C. A height of 74 in. D. None of these would be considered outliers. A triangular prism has base edges 3 cm, 6 cm, and 7 cm long. Its lateral area is 464 cm^2. What is the height of the prism? Simplify your answer. wha the MIDPOINT of (-6, 8) and (6, -7) Which of the following would NOT likely help the reader or audience determine a speaker's tone?use of words/languagebody languagebackground Reduce la siguiente expresin algebraica:E(x,y)=x3y5+3y5x3+12x3y52y5x3es para hoy The radioactive substance polonium-210, with a half-life of 138.39 days, is present in tobacco. Suppose that the soot in an ex-smoker's lungs contains 100 milligrams of polonium-210. How much radioactive polonium will remain after one year of not smoking