An object is travelling in a straight line. The diagram is the speed-time graph for
the object.
At which labelled point is the object accelerating at a changing rate?

Answer:

Humans survive through gaining nutrients by eating

Answer:

We must have food, water, air, and shelter to survive. If any one of these basic needs is not met, then humans cannot survive.  Oxygen is one of the most essential human needs. Our bodies need a consistent supply of it to function properly. Without access to oxygen, you can experience a condition known as cerebral hypoxia, which affects the brain. As little as five minutes without air can result in brain damage. We get food from plants and animals, we get water from rivers and streams, and we get shelter from building anything that is around.

Explanation:

Answer:

1.62

Explanation:

comment section (credits to charlizebarth)+ correct on acellus

EMF induced in coil is directly proportional to the rate of change of magnetic flux by the flowing current with n number of turns in it.The total emf generated is 1.62 volts

Given-

Total coils in a solenoid [tex]N[/tex] is 365 coils.

The change in flux is,

[tex]d\phi=9.44\times10^{-5} -2.57\times 10^{-5}[/tex]

[tex]d\phi=6.87\times10^{-5}[/tex]

The change in time [tex]dt[/tex] is 0.0154 sec.

According to Faraday's law the EMF induced in coil is directly proportional to the rate of change of magnetic flux produced in the coil by the current i flowing in it with conductor having a finite number of turns in it.This can be given as,

[tex]emf=-N\dfrac{d\phi }{dt}[/tex]

[tex]emf=-364\times \dfrac{6.87\times 10^{-5}}{0.0154}[/tex]

[tex]emf= -1.62[/tex]

Hence, the total emf generated is 1.62 volts.

For more about the EMF, follow the link below-

https://brainly.com/question/118936

Answer:

El neumático soportará una presión de 1.7 atm.

Explanation:

Podemos encontrar la presión final del neumático usando la ecuación del gas ideal:

[tex] PV = nRT [/tex]

En donde:

P: es la presión

V: es el volumen

n: es el número de moles del gas

R: es la constante de gases ideales

T: es la temperatura

Cuando el neumático soporta la presión inicial tenemos:

P₁ = 1.5 atm

T₁ = 300 K

[tex] V_{1} = \frac{nRT_{1}}{P_{1}} [/tex]  (1)  

La presión cuando T = 67 °C es:

[tex] P_{2} = \frac{nRT_{2}}{V_{2}} [/tex]   (2)

Dado que V₁ = V₂  (el volumen del neumático no cambia), al introducir la ecuación (1) en la ecuación (2) podemos encontrar la presión final:

[tex] P_{2} = \frac{nRT_{2}}{V_{2}} = \frac{nRT_{2}}{\frac{nRT_{1}}{P_{1}}} = \frac{P_{1}T_{2}}{T_{1}} = \frac{1.5 atm*(67 + 273)K}{300 K} = 1.7 atm [/tex]  

Por lo tanto, si en el transcurso de un viaje las ruedas alcanzan una temperatura de 67 ºC, el neumático soportará una presión de 1.7 atm.

Espero que te sea de utilidad!

For this assignment, you will develop several models that show how light waves and mechanical waves are reflected, absorbed, or transmitted through various materials. For each model, you will write a brief description of the interaction between the wave and the material. You will also compose two typewritten paragraphs. The first will compare and contrast light waves interacting with different materials. The second will explain why materials with certain properties are well suited for particular functions.

A wave is any disturbance that carries energy from one place to another. There are two different types of waves: mechanical and electromagnetic. A mechanical wave carries energy through matter. Energy is transferred through vibrating particles of matter. Examples of mechanical waves include ocean waves, sound waves, and seismic waves. Like a mechanical wave, an electromagnetic wave can also carry energy through matter. However, unlike a mechanical wave, an electromagnetic wave does not need particles of matter to carry energy. Examples of electromagnetic waves include microwaves, visible light, X-rays, and radiation from the Sun.

Answer:

Here the other guy is right I’m answering so he can be marked brainliest

Explanation:

Remember that moment before collision is equal to the moment after collision.

[tex](m1 \times u1) + (m2 \times u2) = (m1 \times v1) + (m2 \times u2)[/tex]

Plugging in our values,

[tex](6 \times 4) - (3 \times 2) = (6 \times 1) + (3 \times v2) \\ 24 - 6 = 6 \times 3v2 \\ 18 = 18v2 \\ v2 = 1 {ms}^{ - 1} [/tex]

The velocity of the second car after the collision is 8 m/s.

The law of conservation of momentum states that, within the domain, the total momentum before collision is equal to the momentum after collision.

Here,

Mass of the car to the right, m₁ = 6 kg

Mass of the car to the left, m₂ = 3 kg

Velocity of the first car before collision, u₁ = 4 m/s

Velocity of the second car before collision, u₂ = 2 m/s

Velocity of the first car after collision, v₁ = 1 m/s

According to the conservation of momentum,

(m₁u₁) + (m₂u₂) = (m₁v₁) + (m₂v₂)

(6x4) + (3x2) = (6x1) + (3v₂)

3v₂ = 24

Therefore, v₂ = 24/3

v₂ = 8 m/s

Hence,

The velocity of the second car after the collision is 8 m/s.

To learn more about law of conservation of momentum, click:

https://brainly.com/question/17140635

#SPJ3

Answer:.....................

solar panels

Answer:

Las células del interior son negativas, mientras que en el exterior son positivas.

Explanation:

Que tenga un buen día :)

If the lens of our eyes were concave, we would not be able to see. We would be blind. This is because our eyes form a visual image on the same side of the lens at the object being viewed. Thus, a concave lens would result in the visual image focusing in front of the eye, not the retina inside the eye. This would mean that no signals would be sent to the brain, and vision would not be possible.

Answer:

the acceleration of gravity on Planet X is 19.89 m/s^2

Explanation:

The computation of the acceleration of gravity on Planet X is shown below:

T = 2π√l ÷ √g

g = l ÷ (T÷ 2π)^2

= 4π^2l ÷ T^2

= 4π^2× 0.2 ÷ 0.63^2

= 19.89 m/s^2

Hence, the acceleration of gravity on Planet X is 19.89 m/s^2

In this way it should be calculated

The same would be relevant and cosnidered

Answer:

Explanation:

First of all, I used the specific heat of water as 4182 J/(kgC) and the specific heat of ethyl alcohol (EtOH) as 2440 J/(kgC); that means that we need the masses in kg, not g.

120.g = .1200 kg of ethyl alcohol. Now for the formula:

[tex]t_f=\frac{(m_{H2O}*spheat_{H2O}*temp_{H2O})+(m_{EtOH}*spheat_{EtOH}*temp_{EtOH})}{(m_{H2O}*spheat_{H2O})+(m_{EtOH}*spheat_{EtOH})}[/tex] where spheat is specific heat.

Filling that horrifying-looking formula in with some values:

[tex]16.0=\frac{(x*4182*20.0)+(.1200*2440*10.0)}{(x*4182)+(.1200*2440)}[/tex] and

[tex]16.0=\frac{83640x+2928}{4182x+292.8}[/tex] and

16(4182x + 292.8) = 83640x + 2928 and

66912x + 4684.8 = 83640x + 2928 and

1756.8 = 16728x so

x = .105 kg and the amount of water added is 105 g

Answer:

4cm

Explanation:

If it's a simple ratio 2cm:10N to ?cm:20N, It should be 4cm:20N.

Answer:

when you kick a football it stops after sometime this is because of fiction force

Explanation:

Answer:

gtsidtuye5udme5ir66eisthfetewjey

Explanation:

•diamond is a great place to start and I am not sure if I can you to dear friend of the day I am not a member of thejtearhaarymrue but I think you should have all of your ideas to be a good choice if you welcome mam and happiness of the people you are not j or your own children like sw or your own children or the family and happiness of the past year and happiness and love chocolate and I love chocolate too but you are a great person to be with example of the same

Answer:

what's languae it's that?

Answer:

Explanation:

There are 2 ways to help with this. Explain the details, which are fairly simple in this topic, or give the formula. My hope is that an explanation will last longer than memorizing the formula. I give you both.

If a wave has frequency, f, of 3 Hz, its period, T, is

1

3

s

. The wavelength,

λ

, is 5 meters. That means that in the time of one period, the wave travels 5 m.

In general,

S

p

e

e

d

=

distance

time

In applying this general definition of speed

↑

to a wave, we have

speed of the wave

=

wavelength

period

Note: we generally use v for speed of a wave. Using the variable names, then that last formula is written

v

=

λ

T

Since

T

=

1

f

, we can also say that

v

=

λ

⋅

f

So, using that last formula

v

=

5

m

⋅

3

H

z

=

15

m

s

Note: the unit Hz is equivalent to what it was called 100 years ago,

cycles

second

(

also cps

)

. Cycles is not a true unit, so the Hz contributed only the "per second" to the result

15

m

s

.

Answer: the speed is =30ms^-1 The speed of a wave is given by "speed" (ms^-1)= "frequency(Hz)" xx "wavelength (m)" The frequency is f=100Hz The wavelength is lambda=0.3m The speed is v=lambdaf=0.3*100=30ms^-1

Explanation:

Answer:  B

Explanation:

i searched this in googl.e, and there was one website, so i clicked it, and umm it was very disgusting ,,,

I am not sure of this, but it is either the third option or the last option.

this is my answer sure po ako n tama iyan

Answer: The crest of one wave overlaps with the trough of another

Explanation:

I took the test and got 100%. This is the correct answer

The best description of the destructive interference of light is the crest of one wave overlaps with the trough of another.

Destructive interference takes place when waves come together in such a manner that they completely cancel each other out or amplitude of the resulting wave decreased.

The highest surface part of a wave is called the crest, and the lowest part is the trough.

To learn more about Destructive interference here

https://brainly.com/question/16098226

#SPJ2

Answer:

16.2m/s

Explanation:

Kinetic energy=1/2mass*speed squared

KE=1/2mv^2

Data,

KE=85J

M=0.65kg

V=?

85J=1/2(0.65kg)V^2

Cross multiply

2 *85=0.65V^2

Divide both sides by 0.65

170/0.65=v^2

V=✓(170/0.65)

V= 16.172m/s

First option is collect

Answer:

Current, I = 4.75 Amps

Explanation:

Given the following data;

Voltage = 19 V

Resistance = 4 Ohms

To find the current;

Ohm's law states that at constant temperature, the current flowing in an electrical circuit is directly proportional to the voltage applied across the two points and inversely proportional to the resistance in the electrical circuit.

Mathematically, Ohm's law is given by the formula;

[tex] V = IR[/tex]

Where;

V represents voltage measured in voltage.

I represents current measured in amperes.

R represents resistance measured in ohms.

Making current (I) the subject of formula, we have;

[tex] I = \frac {V}{R} [/tex]

Substituting into the formula, we have;

[tex] I = \frac {19}{4} [/tex]

Current, I = 4.75 Amps

Explanation:

1. f = r/2 = 34.0/2 = 17.0 cm

2. 1/s'= -1/f - 1/s

= -1/17 - 1/50

= (-50-17) /850

= (-67) /850

s' = 850/(-67) = - 12.69 cm

3. M = |s'/s| = |-12.69/50| = 0.25

h' = 0.25×20 = 4 cm

The time taken is 10 years.

The term simple interest is an interest that is charged only on the principal and not on the interest.

We have the following;

Principal =  500 birr

amount = 900 birr

rate = 8%

Interest = 900 birr - 500 birr = 400 birr

400 = 500 × 8 × T/100

400 × 100 = 500 × 8 × T

T = 400 × 100/500 × 8

T = 10 years

Learn more about simple interest:https://brainly.com/question/2793278

Answer:

10 years

Explanation:

To solve this first we have to find the simple interest.

Let us find it now.

Interest = birr 900 - birr 500

             = birr 400

Now we are having,

Amount = birr 900

Principal = birr 500

Interest = birr 400

rate = 8%

Period of time = ?

Let us use the formula to find the period of time.

Simple interest = Principal × Rate × Time ÷ 100

birr 400  = birr 500 × 8 × t ÷ 100

birr 400 × 100 = 4000t

40000 = 4000t

Divide both sides by 4000.

10 = t

Therefore, the time is 10 years.

Let me know if you have any other questions. :-)

The horizontal component of velocity is

(22 m/s) • cosine(62°).

The vertical component of velocity is

(22 m/s) • sine(62°).

These are the original components, right after the kick. As time goes on, the horizontal one doesn't change. But the vertical one gets bigger and bigger, because gravity is accelerating the ball downward.

That's the complete story of projectile motion.

Answer:

Procedures 4 and 5.

Explanation:

Both would cause the box to move up.

4, it becomes lighter

5, the other becomes heavier, pulling it down, causing box one to go up

Since we seek the action of force to push up box 1, the students observes an unbalanced upward force on Box 1 in procedures 4 and procedure 5.

Generally, In procedure 4 we added another mass to the box two, therefore, causing box one to experience an upward force.

Therefore, students observe an unbalanced upward force on Box 1 in procedure 4.

Procedure 5 we remove masses from box 1 resulting in box 2 becoming heavier, pulling it down.

Therefore, students observe an unbalanced upward force on Box 1 in procedure 5.

Read more about Force

https://brainly.com/question/26115859

Answer:

In fact, the mass m and the force constant k are the only factors that affect the period and frequency of simple harmonic motion.

Answer:

D

Explanation:

Spy gear is different from Spyware.

Answer:

Standing in a moving bus may lead the person fall when the driver will apply brake.

Explanation:

According to Newton's third law of motion, there is an equal and opposite reaction to every action. When the bus is moving, the person standing is in the state of rest. The moment the driver applies brake, the bus stops. The stopping of the bus makes the person in the stationary position change in motion. Because of this force, the person may fall and collide if he is standing instead of sitting in the moving bus.