An object of mass m is traveling in a circle with centripetal force f c. If the velocity of the object is v, what is the radius of the circle?

Explanation:

Ribosomes are not quite the same as different organelles since they have no layer around them that isolates them from different organelles, they comprise of two subunits, and when they are creating sure proteins they can become film bound to the endoplasmic reticulum, however they can likewise be free drifting while at the same time performing

Answer:

Time taken 4 hrs. 38 minutes

Explanation:

As speed = distance/time interval

So time taken = 4.38

speed=distance/time

we know the speed and we know the distance so we can calculate the time

120km/h=525km/time

time=525km/120km/h=4.375hours or 4 hours and 22 minutes and 30 seconds

Answer:

Most electrical wire is covered in a rubber or plastic coating called insulation. The purpose of insulation covering the metal part of an electrical wire is to prevent accidental contact with other conductors of electricity, which might result in an unintentional electric current through those other conductors.

Explanation:

Answer:

its B

Explanation:

the movement of charged particles in a conductor

Charged particles move through a conductor best describes an Electric current.

A stream of charged particles, such as electrons or ions, traveling through an electrical conductor or a vacuum is known as an electric current.

Charge carriers, which can be any of a number of particle kinds depending on the conductor, are the moving particles. Electrons flowing over a wire are frequently used as charge carriers in electric circuits.

They can be electrons or holes in semiconductors. Ions are the charge carriers in an electrolyte, whereas ions and electrons are the charge carriers in plasma, an ionized gas.

Therefore, Charged particles move through a conductor best describes an Electric current.

To learn more about electric current, refer to the link:

https://brainly.com/question/2264542

#SPJ2

Answer:

W = MG

750 = M * 10

M = 750/10

M = 75 kg

Answer:

76.479 Kilograms Force (kgf)

Explanation:

There would be two forces acting on the box parallel to the floor, with a net force of

∑ F = p - f = m a

where p = magnitude of the push, f = mag. of friction, m = mass of the box, and a = acceleration. To find p, we first need f .

There are also only two forces acting on the box perpendicular to the floor, with net force

∑ F = n - w = 0

where n = mag. of normal force of the floor on the box and w = weight of the box. The net force is 0 because the box is only accelerating parallel to the floor.

w = m g, where g = 9.8 m/s² is the mag. of the acceleration due to gravity, so we can solve for n :

n = w = m g

n = (22 kg) (9.8 m/s²)

n = 215.6 N

The kinetic friction is proportional to the normal force by a factor of the given coefficient of friction, µ = 0.17, such that

f = µ n

f = 0.17 (215.6 N)

f = 36.652 N

Now solve for the required pushing force:

p - 36.652 N = (22 kg) (1.9 m/s²)

p ≈ 78 N

Answer:

0

Explanation:

Answer:

Because it is always the substance’s density divided by the density of water which is 1 g/cm 3

Explanation:

The density of water is 1g/cm³;

  Specific gravity = [tex]\frac{density of substance}{density of water}[/tex]

Since specific gravity is a relative comparison of a substance density with that of water, the values always the same.

Density of water is 1 and it will have no effect on the density of the substance.

The only difference is in the units. The density of a substance will have a unit but that of the specific gravity will have no unit.

Numerically, dividing by 1 has no implication.

Answer:  the answer is C

Explanation:Specific gravity is the density of a substance divided by the density of water. Since (at standard temperature and pressure) water has a density of 1 gram/cm3, and since all of the units cancel, specific gravity is usually very close to the same value as density

Answer:

boron and neon.

Explanation:

two element compounds are usually ionic when one element is a metal and the other is a non-metal. boron is a metal, whereas neon is a non-metal. i might be wrong but hope it helps.

Answer:

We multiply [tex]x = 23.78\times 10^{-6}\,\frac{m^{3}}{mol}[/tex] by the amount of mole to change units to cubic meters.

Explanation:

Let [tex]x = 23.78\times 10^{-6}\,\frac{m^{3}}{mol}[/tex], we change the unit to cubic meters by multiplying this number by the amount of moles of the sample. For instance, let [tex]n = 1\,mol[/tex], then the obtain the following result:

[tex]m = x\cdot n[/tex] (1)

[tex]m = \left(23.78\times 10^{-6}\,\frac{m^{3}}{mol} \right)\cdot (1\,mol)[/tex]

[tex]m = 23.78\times 10^{-6}\,m^{3}[/tex]

Answer:

huh

Explanation:

im so confused

Answer:

eevee

Explanation:

Answer:

Explanation:

You don't do the same amount of work. The work formula is F*d = W

W = work

F = force

d = the distance moved.

So you do more work when you move the 10N object because the Force (F) has doubled.

Answer:

The rate of heat transfer of the second object is greater than the first object.

Explanation:

[tex]\varepsilon[/tex] = Emissivity of the object

[tex]\sigma[/tex] = Stefan-Boltzmann constant = [tex]5.67\times 10^{-8}\ \text{W/m}^2/\text{K}^4[/tex]

[tex]T_1[/tex] = Temperature of surface 1 = [tex]25^{\circ}\text{C}+273.15=298.15\ \text{K}[/tex]

[tex]T_2[/tex] = Temperature of surface 2 = [tex]40^{\circ}\text{C}+273.15=313.15\ \text{K}[/tex]

[tex]T_0[/tex] = Surrounding temperature = [tex]25^{\circ}\text{C}+273.15=298.15\ \text{K}[/tex]

Rate of heat transfer is given by

[tex]P_1=\varepsilon \sigma (T_1^4-T_0^4)\\\Rightarrow P_1=\varepsilon \sigma A_1(298.15^4-298.15^4)\\\Rightarrow P_1=0\ \text{W}[/tex]

[tex]P_2=\varepsilon \sigma (T_2^4-T_0^4)\\\Rightarrow P_2=\varepsilon 5.67\times10^{-8} A_2(313.15^4-298.15^4)\\\Rightarrow P_2=\varepsilon A_297.2[/tex]

[tex]\varepsilon A_297.2>0[/tex]

So, [tex]P_2>P_1[/tex]

Hence, the rate of heat transfer of the second object is greater than the first object.

Answer:

The smallest part of the elements which contains matters in them are atoms :)

Explanation:

The mass of the object is 370N / (9.81N/kg) = 37.7kg.

Answer:

the SI unit of work or energy, equal to the work done by a force of one newton when its point of application moves one meter in the direction of action of the force, equivalent to one 3600th of a watt-hour.

Explanation:

Joule, unit of work or energy in the International System of Units (SI); it is equal to the work done by a force of one newton acting through one metre. Named in honour of the English physicist James Prescott Joule, it equals 107 ergs, or approximately 0.7377 foot-pounds.

Answer:

69.44kJ

Explanation:

Kinetic energy is expressed as;

KE = 1/2mv^2

m is the mass = 500kg

v is the velocity

Get the velocity;

v = displacement/time

velocity = 2000/120

velcoity = 16.7m/s

Gt the kinetic energy

KE = 1/2 * 500 * 16.7²

KE = 250*277.78

KE = 69,444.4Joules

Since 1000J = 1kJ

69,444.4Joules = 69,444.4/1000

69,444.4Joules = 69.44kJ

Hence the Secretariat's average kinetic energy is  69.44kJ

Answer:C 69.0kJ

Explanation:

Answer:

I Believe the answer is

[tex]D. \: \: atmosphere[/tex]

Explanation:

I hope how this helps!

Answer:

128 m

Explanation:

From the question given above, the following data were obtained:

Horizontal velocity (u) = 40 m/s

Height (h) = 50 m

Acceleration due to gravity (g) = 9.8 m/s²

Horizontal distance (s) =?

Next, we shall determine the time taken for the package to get to the ground.

This can be obtained as follow:

Height (h) = 50 m

Acceleration due to gravity (g) = 9.8 m/s²

Time (t) =?

h = ½gt²

50 = ½ × 9.8 × t²

50 = 4.9 × t²

Divide both side by 4.9

t² = 50 / 4.9

t² = 10.2

Take the square root of both side

t = √10.2

t = 3.2 s

Finally, we shall determine where the package lands by calculating the horizontal distance travelled by the package after being dropped from the plane. This can be obtained as follow:

Horizontal velocity (u) = 40 m/s

Time (t) = 3.2 s

Horizontal distance (s) =?

s = ut

s = 40 × 3.2

s = 128 m

Therefore, the package will land at 128 m relative to the plane

Answer:

120V

Explanation:

Given parameters:

Current  = 6A

Resistance  = 20Ω

Unknown:

Voltage = ?

Solution:

According to ohms law;

           V = IR

Where V is the voltage

            I is the current

            R is the resistance

Now, insert the parameters and solve;

    V  = 6 x 20  = 120V

Answer:18,000 meters

Explanation:3600x5=18,000.

Answer:

A. Water pollution contributes to water scarcity.

Explanation:

Water pollution occurs when materials are disposed in water body, thus making it unfit for use. A polluted water can not be used for various purposes that water can be used for. Examples include: recreation, drinking, washing etc.

Water scarcity is the situation when available water is not sufficient for the use of organisms in a community. This majorly occurs in arid area.

Thus, since a polluted water renders water to be useless, therefore water pollution contributes  to water scarcity.

Answer:

Water contributes to water scarcity

Explanation:

pls nobody has ever given me brainiest pls give me brainliest

Answer:

A. 2.58m

Explanation:

Using the formula;

F = GMm/r²

M and  m are the masses

G is the gravitational constant

r is the distance between the masses

Substitute

0.00006 = 6.67*10^-11(2000)(3000)/r²

0.00006r² = 6.67*10^-11*6000000

0.00006r² = 40.02*10^-5

0.00006r² = 0.0004

r² =  0.0004/0.00006

r² = 6.66

r = 2.58m

Hence the distance between them is 2.58m

Answer:

Possiable answer by edge:

The shape of a river’s stream bed affects the speed and eroding power of a river by influencing the amount of friction between the water flowing through the river and the stream bed below. Friction is the force that opposes the motion of one surface as it moves across another surface. In a river, there is friction between the flowing water and the stream bed beneath it. Where a river is deep, less water comes into contact with the stream bed, so there is less friction. The reduced friction means there is less opposition to the water’s motion, so the river flows at a greater speed and has more kinetic energy for erosion. On the other hand, where a river is shallow, more water comes into contact with the stream bed, so there is more friction. The increased friction means there is more opposition to the water’s motion, so the river flows at a lesser speed and has less kinetic energy for erosion. Also, the roughness of a stream bed covered with boulders and other obstacles causes the water to flow through the river in a turbulent fashion. This could cause the river to move slower in some cases or erode more in other cases.

Explanation:

summary of answer:

influencing the amount of friction between the water flowing through the river and the stream bed below.

Answer:

The value is  [tex]I= 0.0597\ A[/tex]  

Explanation:

From the question we are told that

    The length of the solenoid is [tex]l = 15 \ cm = 0.15 \ m[/tex]

     The number of turns is  [tex]N = 100[/tex]

      The  magnetic field of the earth is  [tex]B = 5* 10^{-5} \ T[/tex]

Gnerally magnetic field is mathematically represented as

          [tex]B = \frac{\mu_o * N * I }{ l }[/tex]

=>        [tex]I= \frac{Bl}{ \mu_o *N }[/tex]

=>        [tex]I= \frac{ 5 *10^{-5} * 0.15}{4\pi *10^{-7} *100 }[/tex]  

=>        [tex]I= 0.0597\ A[/tex]