an organization deployed components so that they could use netflow to measure network traffic statistics. which of the deployed components needs a high bandwidth network link and substantial storage capacity?

Adding slight variations in the position of the arms and legs with each image in the series would add a sense of realism to the motion. This mimics the natural movement of a person's body when they walk and makes the animation look more lifelike.

To add a sense of realism to the motion when creating a series of images to animate a person walking, you should:

1. Ensure that the images in the series capture different stages of the walking cycle, including the contact, passing, and upswing positions.
2. Pay attention to the natural movements of the arms and legs, ensuring they are coordinated and opposite to each other (e.g., left arm forward when right leg is forward).
3. Incorporate subtle body movements, such as the slight up-and-down motion of the head and torso during each step.
4. Add variations in foot placement, with the heel touching the ground first and then rolling to the toes as the foot lifts off the ground.
5. Include secondary movements, such as clothing or hair movement, to enhance the sense of realism.

By incorporating these elements into your series of images, you can create a more realistic and believable animation of a person walking.

to know more about series click here:

brainly.com/question/27184786

#SPJ11

By performing these steps, you will find that the remainder (CRC value) is 01000111, which corresponds to the third option in your list. So, the correct CRC value is 01000111.

To calculate the CRC using the given CRC7 polynomial (x^7 + x^5 + x^3 + x^2) and input hex data B0DE, follow these steps:

1. Convert the input hex data to binary:
  B0DE = 10110000 11011110

2. Append 7 zeros to the binary data (input):
  10110000 11011110 0000000

3. Set the polynomial representation in binary:
  x^7 + x^5 + x^3 + x^2 = 101010100

4. Perform binary division of the appended data by the polynomial.

5. After the binary division, the remainder will be the CRC value.

By performing these steps, you will find that the remainder (CRC value) is 01000111, which corresponds to the third option in your list. So, the correct CRC value is 01000111.

to learn more about CRC value click here:

brainly.com/question/31115117

#SPJ11

Based on your description of the process, there are three activities, and each one can potentially go wrong. In an event tree, each activity can either go right or wrong, resulting in two possible outcomes per activity.

To find the total number of leaves (possible outcomes) in the event tree, you can calculate 2 raised to the power of the number of activities: To determine the number of leaves in the event tree of a process with three activities, we need to consider all possible combinations of outcomes for each activity. Assuming that each activity can have two potential outcomes (e.g. success or failure), the total number of possible outcomes for the entire process is 2x2x2 = 8. Therefore, the event tree for this process will have 8 leaves.

Learn more about combinations about

https://brainly.com/question/31596715

#SPJ11

The thing that a person can implement to facilitate this partnership is option A: AD Federation Services and AD Rights Management Services

ADFS gives a secure strategy for sharing verification and authorization information between two partitioned timberlands, permitting clients from both companies to get to Web-based applications safely.

Together, ADFS and Advertisement RMS can guarantee secure communication and controlled report utilization between ABC and XYZ companies.

Learn more about partnership  from

https://brainly.com/question/13280624

#SPJ1

See text below

In a new partnership with XYZ Company, ABC company wants to share documents securely using Web-based applications. All communication must be secure, and document usage must be controlled. Both companies run Windows Server 2016 domains but must remain in separate forests. What can you implement to facilitate this partnership?

AD Federation Services and AD Rights Management Services

Network Device Enrollment Services

AD Certificate Services and AD Lightweight Directory Services

Two-way transitive realm trusts

Not writing a return statement in a value-returning method would cause a compilation error. You cannot have a return statement with a value in a void method, but you can have a return statement without a value. The return statement in the given xMethod would cause syntax errors.

1. A value-returning method is expected to return a value of a specific type. If you do not provide a return statement, the compiler will generate an error, as the method is not fulfilling its contract.
2. A void method is not expected to return a value. You can include a return statement without a value (simply "return;") to exit the method early, but you cannot include a return statement with a value, as it would conflict with the method's definition.
3. In the provided xMethod, there are syntax errors:
  a. The method is defined as void but has a return statement with a value (x + y). This is not allowed.
  b. The statement "System.out.println(x + y):" has a colon (:) instead of a semicolon (;). It should be "System.out.println(x + y);"
  c. The return statement also has a colon (:) instead of a semicolon (;). It should be "return x + y;"
To fix the syntax errors in the given method, you need to change the method's return type to a non-void type (e.g., double) if you want to return a value, and replace colons with semicolons in the statements. Also, remember to include return statements in value-returning methods and avoid including return statements with values in void methods.

Learn more about value-returning method visit:

https://brainly.com/question/31525554

#SPJ11

Answer is c. A validity coefficient is a measure of the strength and direction of the relationship between a test score and performance on a criterion measure. It is best illustrated by the correlation between test scores and performance on a criterion.

A coefficient is a numerical value that represents the strength and direction of a relationship between two variables, while a correlation is a statistical measure that indicates the degree to which two variables are related to each other. Therefore, the validity coefficient is a type of correlation coefficient that represents the relationship between test scores and performance on a criterion.  coefficient is just an integer whose is either multiplied either by variable it is associated with or written alongside the variable.

A coefficient is, in other words, the numerical component of a term that contains both constants and variables.

A monomial is the fundamental unit of a polynomial.

A monomial, which only has one term, can be either a number, an variable, or the result of a number and several variables when multiplied by an exponent.

Learn more about coefficient here

https://brainly.com/question/30066987

#SPJ11

I can help you with that! Here's a sample Python script that will find all the capitalized words in a given text file and present them in alphabetical order:

filename = 'example.txt'  # Replace with your file name
capitalized_words = []

with open(filename, 'r') as file:
   text = file.read()
   # Use regular expression to find all capitalized words
   capitalized_words = re.findall(r'\b[A-Z][a-z]*\b', text)

# Sort the list of capitalized words in alphabetical order
capitalized_words.sort()

# Print the list of capitalized words
print("Capitalized words in alphabetical order:")
for word in capitalized_words:
   print(word)
```
In this script, we first define the filename of the text file we want to search for capitalized words. We then initialize an empty list `capitalized_words` to store the words we find.
Next, we open the file and read its contents into a string variable `text`. We use a regular expression to search for words that start with a capital letter and are followed by zero or more lowercase letters. The `\b` in the regularexpression specifies a word boundary, so we're only matching whole words.
We then sort the list of capitalized words in alphabetical order using the `sort()` method.
Finally, we print the list of capitalized words using a `for` loop. This will output the capitalized words in alphabetical order.

To learn more about text file click the link below:

brainly.com/question/28335937

#SPJ11

The software that helps protect against viruses that are attached to email is antivirus software. Therefore, the correct option is (B) Antivirus.

Antivirus software is designed to detect and remove viruses and other malicious software from computer systems.

It can also protect against viruses that are attached to email by scanning email attachments for viruses and blocking them if they are detected.

Firewall software, on the other hand, is designed to monitor and control network traffic to and from a computer system.

While it can help prevent unauthorized access to a computer system, it may not necessarily protect against viruses that are attached to email.

Windows defender is a type of antivirus software that is built into the Windows operating system.

A hardware firewall is a physical device that is installed between a computer system and the internet to help protect against network-based attacks.

Therefore, the correct option is (B) Antivirus.

For more such questions on Viruses :

https://brainly.com/question/4596087

#SPJ11

The Control Objectives for Information and Related Technology (COBIT) framework is a set of guidelines for IT management and governance

The Control Objectives for Information and Related Technology (COBIT) framework is a comprehensive and widely-accepted set of guidelines designed to help organizations effectively manage their IT resources, improve governance, and minimize risks.

Developed by the Information Systems Audit and Control Association (ISACA), COBIT provides a set of best practices, principles, and analytical tools for IT management.

The framework consists of five key components: governance objectives, management processes, enablers, performance management, and a reference model. 

Learn more about COBIT framework at

https://brainly.com/question/29679012

#SPJ11

Answer: The most appropriate situation to choose lossy compression over lossless compression is:

Storing music files on a smartphone in order to maximize the number of songs that can be stored

Lossy compression is a technique used to reduce the size of a file by discarding some of the information in the file. This technique is suitable for situations where some loss of quality is acceptable, and where the primary goal is to reduce the file size as much as possible.

In the given situations, storing music files on a smartphone is the most appropriate situation to choose lossy compression over lossless compression. Lossy compression can help reduce the file size of music files significantly without compromising the overall listening experience. The lossy compression algorithms such as MP3, AAC, and Ogg Vorbis can compress music files without any significant loss of sound quality. On the other hand, for storing digital photographs, formatted text documents, and videos, lossless compression would be more appropriate since they require high-quality preservation.

Lossy compression would be most appropriate for storing music files on a smartphone in order to maximize the number of songs that can be stored.

This is because the compression algorithm can discard some of the less important information in the music file, reducing its size while still maintaining an acceptable level of quality.

For the other situations, lossless compression would be more appropriate as it preserves the original quality of the data and is necessary for situations where the data needs to be restored to its original form, such as with a text document or video file, or for displaying digital photographs in a large format in an art gallery.

learn more about compression here:

brainly.com/question/14828391

#SPJ11

Charging a personal mobile device using GFE is permissible when you have official permission, adhere to security protocols, and ensure that government operations are not negatively impacted.

First, ensure that you have explicit permission from an authorized official to use GFE for personal devices. This ensures compliance with organizational policies and avoids any misuse of resources.

Additionally, be mindful of potential security risks. Connecting a personal device to GFE could introduce vulnerabilities or malware, potentially compromising sensitive data.

Always follow your organization's security protocols and ensure your personal device is secure and up-to-date.

Furthermore, it's important to avoid negatively impacting government operations or resources. Ensure that charging your personal device does not interfere with GFE's primary functions, limit its availability for others, or consume excessive power.

Learn more about GFE at

https://brainly.com/question/6360981

#SPJ11

Multicasting is NOT enabled through the use of multiple servers. Multicasting is a network communication method that allows data to be sent from one sender to multiple receivers at the same time, without the need for multiple separate transmissions.

Multicasting is a technique used in networking to allow a single packet to be sent to multiple destinations simultaneously. It is typically used for applications such as streaming media or video conferencing, where multiple recipients need to receive the same data at the same time.While multiple servers can provide capabilities such as distributed applications, backup, and redundancy, they are not directly related to enabling multicasting. In order to support multicasting, network infrastructure devices such as routers or switches need to have support for multicast routing protocols, and the application or service using multicasting needs to be configured to use the appropriate multicast group address.

Learn more about Multicasting here

https://brainly.com/question/29753829

#SPJ11

Locality is a type of memory access behavior that occurs in computer systems.

Locality is a type of behavior in computer systems where a program or process tends to access a relatively small portion of its address space or memory at any given time. This behavior can be classified into two types: temporal locality and spatial locality. Temporal locality refers to the tendency of a program to access the same memory location repeatedly over a short period of time, while spatial locality refers to the tendency of a program to access memory locations that are near each other in the address space.

By exploiting these localities, computer systems can optimize their performance and reduce the number of memory accesses, resulting in faster execution times.

You can learn more about Locality at

https://brainly.com/question/15579387

#SPJ11

RobotBuilder typically refers to a software tool or framework that allows users to easily build and customize robots. It combines programming elements and drag-and-drop interfaces to create a simplified process for building robots. The term "RobotBuilder" essentially signifies a tool or platform that helps people build robots without extensive technical expertise or coding knowledge.

The term "RobotBuilder" generally refers to a person or entity who creates or assembles robots. RobotBuilder can be an individual or a company who specializes in designing, constructing, and programming robots for various purposes, such as manufacturing, automation, exploration, research, entertainment, and education. Robot building involves various skills, including mechanical engineering, electrical engineering, programming, and robotics. A RobotBuilder can create custom robots tailored to specific needs or work on pre-designed robot kits and modify them to suit particular requirements. RobotBuilders can work in different industries, such as manufacturing, aerospace, healthcare, entertainment, and defense. They are responsible for designing, assembling, and programming robots to perform tasks efficiently and accurately, contributing to the advancement of technology and automation.

Learn more about software here-

https://brainly.com/question/985406

3SPJ11

The heapify algorithm rearranges the elements of the array to form a max heap, where each parent node is greater than its child nodes.

here's a detailed explanation of the heap sort algorithm on the given array:Heapify the arrayTo start, the heapify process is applied to the array [86, 56, 50, 34, 21].

After applying heapify, the array looks like this:

     86

    /  \

   56   50

  /  \

 34   21

Step 2: Sort the array

Once the array is heapified, the algorithm can begin sorting it in ascending order.The first step is to swap the root node (the largest value in the heap) with the last node in the heap. In this case, the root node is 86, and the last node in the heap is 21

To learn more about array click the link below:

brainly.com/question/29311283

#SPJ11

To implement 802.1x authentication on a wireless network, RADIUS will be required. This is because RADIUS is a centralized authentication server that can provide secure and scalable authentication for wireless networks.

802.1x is a standard for port-based network access control that provides authentication and authorization for devices attempting to connect to a network. It uses an authentication server, such as RADIUS, to verify the identity of the device before allowing access to the network.

RADIUS is a client/server protocol that provides centralized authentication, authorization, and accounting (AAA) management for network devices. It allows for the creation of user accounts and authentication policies that can be applied to different network devices, including wireless access points.

When a device attempts to connect to a network using 802.1x authentication, it sends a request to the access point, which in turn sends the request to the RADIUS server for verification. The RADIUS server then authenticates the user and authorizes access to the network based on the policies configured on the server.

To learn more about Wireless networks, visit:

https://brainly.com/question/29890629

#SPJ11

Spaghetti code is the type of code that performs the required action but in an unorganized and inefficient manner. This coding style is characterized by a lack of structure, making it difficult to understand and maintain.

The kind of code that performs the required action but in an unorganized and inefficient manner is spaghetti code. Spaghetti code refers to a programming style where the code is written in an unstructured and tangled way, making it difficult to read and maintain. This can happen when a programmer writes code without following proper coding conventions or when a project has many contributors with different coding styles. The result is a codebase that is difficult to debug, modify, and enhance. To avoid spaghetti code, it's important to follow best practices, such as writing modular and reusable code, using descriptive variable and function names, and organizing the code in a logical and structured way.

learn more about coding style  here:

https://brainly.com/question/28222619

#SPJ11

The purpose of the compressor on the Parallel Compressor track is to control the dynamic range of an audio signal, and the advantage of using parallel compression is that it allows for a more natural and balanced sound while still achieving the desired compression effect.

The purpose of the compressor on the Parallel Compressor track is to control the dynamic range of an audio signal by reducing the volume of louder parts and increasing the volume of quieter parts.

By using a parallel compression technique, you can blend the compressed signal with the original, uncompressed signal, allowing for a more natural and balanced sound while still achieving the desired compression effect.

This technique is commonly used in music production and mixing to enhance the overall loudness and presence of a track without sacrificing its dynamic range.

Learn more about compressor

brainly.com/question/30656501

#SPJ11

In order to tell git to track our file in the list of changes to be committed, we need to use the "git add" command. This command adds the specified files to the git index, which is a staging area where changes can be reviewed before being committed to the git repository.

Once we have made changes to our files, we can use the "git add" command to add them to the staging area. We can specify individual files by their names or add all changed files at once using the "." command. For example, if we want to add a file called "example.txt" to the staging area, we would use the following command:

```
git add example.txt
```

After we have added all the necessary files to the staging area, we can use the "git commit" command to commit the changes to the git repository. This creates a new snapshot of the repository with the changes we made.

In summary, to track new files in the list of changes to be committed, we need to use the "git add" command to add them to the staging area. This ensures that our changes are reviewed and committed to the git repository correctly.

Learn more about "git add"  command here:

https://brainly.com/question/31805796

#SPJ11

Program changes and development can affect various components of a software system, depending on the nature of the changes being made.

Here are some common components and features that may be impacted:

User Interface:

Any changes to the functionality of the software will likely require changes to the user interface to reflect the new features or to optimize the user experience.

Database:

Changes to the program may require changes to the database schema or data structures, which may affect the performance, scalability, and reliability of the system.

Application Programming Interfaces (APIs):

Changes to the program may require changes to the APIs used to access or communicate with the system, which may affect the integrations with other software systems.

Security:

Any program changes may impact the security of the system, and it may be necessary to update security protocols, encryption methods, or access control mechanisms.

Performance:

Changes to the program may have an impact on the performance of the system, and it may be necessary to optimize code or scale hardware resources to ensure optimal performance.

Documentation:

Changes to the program may require updates to the documentation to reflect the new features, requirements, or changes to the software system.

Testing:

Changes to the program may require changes to the testing protocols to ensure that the new features and changes work as intended and do not negatively impact other components or features of the system.

For similar questions on Components

https://brainly.com/question/28498043

#SPJ11

The input type that defines a slider control is "C) range."

The correct input type that defines a slider control is "range". The "range" input type creates an interactive slider control that allows users to select a value within a specified range. It is commonly used for controlling settings, such as volume or brightness, or for selecting a numerical value within a certain range. For example, the following HTML code creates a slider control with a range of 0 to 100 and an initial value of 50: <input type="range" min="0" max="100" value="50"> The user can drag the slider handle to select a value between 0 and 100, which can then be used in a JavaScript function or submitted as part of a form.

Learn more about java here-

https://brainly.com/question/30354647

#SPJ11

To write Alpha Phi Omega in Greek capital letters, you would use the following symbols: ΑΦΩ.

Alpha Phi Omega in Greek capital letters is written as ΑΦΩ.

In the Greek alphabet, the first letter is alpha (Α), the sixteenth letter is phi (Φ), and the twenty-third letter is omega (Ω).

To write Alpha Phi Omega in Greek capital letters, we simply use these three letters in order, with each letter capitalized.

The result is ΑΦΩ.

When writing Greek fraternity and sorority names, capital letters are typically used to represent their initials, such as Alpha Phi Omega (ΑΦΩ).  

To know more about Greek visit:

brainly.com/question/30928341

#SPJ11

Answer:

pay full attention, prepare intro, attend events

Explanation:

i don't really know but it feels like common sense so im pretty sure

don't take my work for it lol

The IPv6 datagram header includes several fields that do not appear in the IPv4 header. These fields include the time-to-live (or hop limit) field, the upper layer protocol (or next header) field, the 128-bit source and destination IP addresses, and the flow label field.

The time-to-live field specifies the maximum number of hops that a packet can take before being discarded. The upper layer protocol field indicates the protocol that is encapsulated in the packet's payload, such as TCP or UDP. The 128-bit source and destination IP addresses provide a larger address space compared to the 32-bit addresses in IPv4. Finally, the flow label field is used to identify packets belonging to the same flow, allowing for improved quality of service. The IPv6 datagram header does not include the IP version number field, the header length field, the options field, or the header checksum field, all of which are present in the IPv4 header.

The IPv6 datagram header includes several fields that are unique to the IPv6 protocol, meaning they do not appear in the IPv4 header.

From the given options, the fields that occur ONLY in the IPv6 datagram header are:

f. 128-bit source and destination IP addresses: IPv6 uses 128-bit addresses compared to IPv4's 32-bit addresses, allowing for a significantly larger number of unique IP addresses.

g. The flow label field: This field is unique to IPv6 and is used to label sequences of packets that belong to a specific flow, facilitating the handling of traffic by routers and enabling features like Quality of Service (QoS).

It is important to note that other fields listed may be present in both IPv4 and IPv6 headers, but they might have different names, functionalities, or formats. For example:

a. The time-to-live (TTL) field in IPv4 is equivalent to the hop limit field in IPv6.
b. The upper layer protocol field in IPv4 is similar to the next header field in IPv6.
c. Both IPv4 and IPv6 headers have an IP version number field to indicate the protocol version, but the values are different (4 for IPv4 and 6 for IPv6).
d. The header length field exists in IPv4, but not in IPv6, as the IPv6 header has a fixed length.
e. The options field in IPv4 is similar to the extension headers in IPv6.
h. The header checksum field is present in IPv4 but not in IPv6, as the checksum computation is offloaded to the upper layer protocols in IPv6.

Learn more about datagram at : brainly.com/question/15518389

#SPJ11

In a two-dimensional array, the elements are arranged in a table form where each element is identified by a pair of indices representing its row and column position. So, the given statement is true.

Explanation:

In a two-dimensional array, the elements are arranged in a table form where each element is identified by its row and column index. A two-dimensional array can be thought of as a collection of rows and columns, where each row is itself an array of elements and all rows have the same number of elements. The elements in the array can be accessed using their corresponding row and column indices.

For example, consider a 2D array of integers called "arr" with 3 rows and 4 columns:

arr = [[1, 2, 3, 4],

      [5, 6, 7, 8],

      [9, 10, 11, 12]]

This array can be visualized as a table with 3 rows and 4 columns:

To know more about two-dimensional array click here:

https://brainly.com/question/30463245

#SPJ11

To stop unwanted background noise below a specific level in your file, you should use: (c) gate

A gate is a signal processor that allows audio signals above a certain threshold to pass through while attenuating or silencing signals below that threshold. This helps eliminate unwanted background noise effectively.

The signal processor that you would use to stop unwanted background noise below a specific level in your file is gate. A gate is a device that allows the signal to pass through only if it is above a certain threshold. Anything below that threshold is muted or attenuated. A gate can be useful for removing low-level noise such as hum or hiss from an audio file. However, a gate cannot remove noise that is present at the same level as the desired signal, such as a siren or a cough during a speech. For that, you would need more advanced signal processors such as noise reduction or noise cancellation algorithms

to learn more about signal processor click here:

brainly.com/question/18687632

#SPJ11

Explanation:

The process database is a permanent repository of the process performance data from projects; it can be used for project planning, estimation, analysis of productivity and quality, and other purposes. 2. The PDB consists of data from completed projects, with each project providing one data record.

The resultant byte stream by adding necessary flag bytes and performing byte stuffing for the data is PZDLEAFRGSTXGYK.

Step 1: Add the flag bytes at the beginning and end of the data: DLESTX PZDLEAFRGSTXGYK DLEETX
Step 2: Perform byte stuffing by adding an extra DLE byte before any DLE bytes in the data:
DLESTX PZDLEDLEAFRGSTXGYK DLEETX
Answer: DLESTX PZDLEDLEAFRGSTXGYK DLEETX

Question 2:
Step 1: Add the flag bytes at the beginning and end of the data: DLESTX PARSDLEETXZKPUM DLEETX
Step 2: Perform byte stuffing by adding an extra DLE byte before any DLE bytes in the data:
DLESTX PARSDLEDLEETXZKPUM DLEETX
Answer: DLESTX PARSDLEDLEETXZKPUM DLEETX

Question 3:
Step 1: Add the flag bytes at the beginning and end of the data: DLESTX ASTXDLELEFTDAOY DLEETX
Step 2: Perform byte stuffing by adding an extra DLE byte before any DLE bytes in the data:
DLESTX ASTXDLEDLELEFTDAOY DLEETX
Answer: DLESTX ASTXDLEDLELEFTDAOY DLEETX

Learn more about the byte at  brainly.com/question/14145208

#SPJ11

An electronic repository used to collect and manage information regarding foreign ownership, control, or influence (FOCI), key management personnel (KMPs), and the certificate pertaining to foreign interest (SF 328) is called the National Industrial Security Program Operating Manual (NISPOM).

The NISPOM is a comprehensive and standardized set of guidelines designed to protect classified information and manage security risks associated with the involvement of foreign entities. The electronic repository component of NISPOM ensures that all relevant data is stored and maintained in a secure, centralized database, allowing for efficient access and management of the information.

To fulfill its purpose, the NISPOM outlines specific procedures for collecting and managing information on FOCI, KMPs, and the SF 328. This includes:

1. Evaluating the extent of foreign ownership, control, or influence in a company to determine potential security risks.
2. Identifying key management personnel who hold crucial decision-making positions within the company and are responsible for safeguarding classified information.
3. Ensuring that the SF 328, a document that discloses foreign interest and involvement in a company, is accurately completed and submitted to the relevant authorities.

In summary, the NISPOM serves as an electronic repository for collecting and managing information related to FOCI, KMPs, and the SF 328. This helps protect classified information and maintain security while facilitating efficient access and management of the data.

learn more about KMPs here: brainly.com/question/30585847

#SPJ11

Assuming that the stored data is unsigned, the range of numbers that can be stored in the computer with a word length of 4 bits is from 0 to 15 (2^4 - 1). The range of numbers that can be stored in the computer with a word length of 16 bits is from 0 to 65,535 (2^16 - 1).

A database and a spreadsheet both store data, but a database stores it in tables that interact, whereas a spreadsheet stores it in cells that interact.

A data can be characterised as the formalised representation of facts, concepts, and instructions that is appropriate for user communication.

A spreadsheet is a programme used for data analysis and storage in cells that can be altered, formatted, or otherwise modified within the cell.

The database is a tool that can be used for data analysis and external tabular data storage.

Consequently, the primary distinction between a spreadsheet and a database is that the latter stores data in interactive tables, whilst the former does it in rows and columns.

Learn more about  stored data here

https://brainly.com/question/19697205

#SPJ11