Andy spent the following amounts on lunches this week

One-way ANOVA is applied to independent samples taken from three normally distributed populations with equal variances. The null hypothesis for this procedure is:

H0: μ1 = μ2 = μ3

This means that there are no significant differences between the means of the three normally distributed populations.

One-way ANOVA: One-way ANOVA is a statistical test used to compare the means of three or more independent groups.

Null hypothesis: The null hypothesis for one-way ANOVA is that the means of all the groups are equal.

Alternative hypothesis: The alternative hypothesis, which is accepted if the null hypothesis is rejected, is that at least one of the population means is different from the others.

In this case, the alternative hypothesis is: Ha: At least one of the means is different Test statistic: The test statistic used in one-way ANOVA is the F-statistic.

A small p-value (usually less than 0.05) indicates strong evidence against the null hypothesis.

Decision: If the p-value is less than the significance level (usually 0.05), we reject the null hypothesis and conclude that at least one of the population means is different from the others.

Learn more about One-way ANOVA:

https://brainly.com/question/23638404

#SPJ11

The maximum height of the toy plane is approximately 6.5 meters. Option A is correct.

The maximum height of the toy plane can be determined using the laws of motion and basic kinematics.

The equation for the height of the toy plane as a function of time, assuming no air resistance, can be represented by a quadratic equation in the form of;

h(t) = [tex]h_{0}[/tex] + [tex]V_{0}[/tex]t - (1/2)[tex]gt^{2}[/tex]

where; h(t) is the height of the plane at time t,

[tex]h_{0}[/tex] is the initial height (given as 4 meters),

[tex]V_{0}[/tex] is the initial velocity (given as 7 meters per second),

g is the acceleration due to gravity (which is approximately 9.8 m/s² on Earth), and

t is the time.

To find the maximum height of the plane, we need to determine the time at which the plane reaches its highest point. At this point, the vertical velocity of the plane becomes zero, before it starts to fall back to the ground.

The vertical velocity of the plane can be represented as;

[tex]V_{(t)}[/tex] = [tex]V_{0}[/tex]  -  [tex]g_{t}[/tex]

Setting v(t) to zero and solving for t, we get:

0 =[tex]V_{0}[/tex]  - [tex]g_{t}[/tex]

[tex]g_{t}[/tex] = [tex]V_{0}[/tex]

t = [tex]V_{0}[/tex]  / g

Substituting the given values for [tex]V_{0}[/tex]  and g into the equation;

t = 7 m/s / 9.8 m/s²

t ≈ 0.714 seconds

So, the time taken for the toy plane to reach its highest point is approximately 0.714 seconds.

Now, we can substitute this value of t into the equation for h(t) to find the maximum height of the plane;

[tex]h_{(t)}[/tex]  =  [tex]h_{0}[/tex] + [tex]V_{0}[/tex] t - (1/2)[tex]gt^{2}[/tex]

[tex]h_{(t)}[/tex] = 4 m + 7 m/s × 0.714 s - (1/2) × 9.8 m/s² × (0.714 s)²

Calculating the above expression, we get:

[tex]h_{(t)}[/tex]  ≈ 6.46 meters

Therefore, the maximum height of the toy plane is near by 6.5 meters.

Hence, A. is the correct option.

To know more about maximum height here

https://brainly.com/question/9315508

#SPJ1

S is not continuous at c, and since this is true for any irrational number in (0,1), S is not continuous at any point in (0,1).

To show that S is continuous at 0 and at 1, we need to show that the limit of S(x) as x approaches 0 and 1 exists and is equal to S(0) and S(1), respectively.

First, let's consider the limit as x approaches 0. We have:

lim x→0 S(x) = lim x→0 x² = 0² = 0

Since S(0) = 0, we have lim x→0 S(x) = S(0), and thus S is continuous at 0.

Now let's consider the limit as x approaches 1. We have:

lim x→1 S(x) = lim x→1 x² = 1² = 1

Since S(1) = 1, we have lim x→1 S(x) = S(1), and thus S is continuous at 1.

To show that S is not continuous at any point in (0,1), we need to find a point c in (0,1) such that S is not continuous at c. One way to do this is to show that the limit of S(x) as x approaches c does not exist.

Let c be any irrational number in (0,1), and let {r_n} be a sequence of rational numbers in (0,1) that converges to c. Then we have:

lim n→∞ S(r_n) = lim n→∞ r_n = c

On the other hand, since c is irrational, S(c) = c². Therefore, we have:

lim x→c S(x) = c²

Since lim n→∞ S(r_n) ≠ lim x→c S(x), the limit of S(x) as x approaches c does not exist. Therefore, S is not continuous at c, and since this is true for any irrational number in (0,1), S is not continuous at any point in (0,1).

To learn more about continuous visit:

https://brainly.com/question/31694381

#SPJ11

The y-coordinate of the point that partitions segment AC into a 1:2 ratio is given as follows:

y = 5.

The y-coordinate of the point that partitions segment AC into a 1:2 ratio is obtained applying the proportions in the context of the problem.

The segment AC is partitioned into a 1:2 ratio, hence the equation for the coordinates of P are given as follows:

P - A = 1/3(C - A).

The coordinates of A and C are given as follows:

A(1,3) and C(6,9).

Hence the y-coordinate of B is obtained as follows:

y - 3 = 1/3(9 - 3)

y - 3 = 2

y = 5.

More can be learned about proportions at https://brainly.com/question/24372153

#SPJ1

The one or two other sequence to create FGHIJ from ABCDE are:

1. F, B+5=G, C+5=H, D+5=I, E+5=J.

2. Reverse ABCDE to get EDCBA

A sequence refers to an ordered list of items. It may be letters, numbers, or any other objects arranged in a particular order.

A sequence of rigid motions and dilations is a combination of transformations that preserve the original shape and size of a figure, but change its position, orientation, and scale.

To create the sequence FGHIJ from ABCDE, there are many possible sequences that can be used. Here are two:

Sequence 1:

Add 5 to each letter in ABCDE to get FGHIJ: A+5=F, B+5=G, C+5=H, D+5=I, E+5=J.

Sequence 2:

Reverse the order of the letters in ABCDE to get EDCBA.

Add 5 to each letter in EDCBA to get JIHGF: E+5=J, D+5=I, C+5=H, B+5=G, A+5=F.

Learn more about sequence at brainly.com/question/28036578

#SPJ1

We can see that 7/4 is located between 3/4 and 1 on the first interval, and 9/4 is located between 2 and 5/2 on the second interval.

To partition each whole number interval into fourths, divide each interval by 4. Label 7/4 between 3/4 and 1 and label 9/4 between 2 and 5/2 on an extended scale from 0 to 3.

To partition each whole number interval into fourths, we can divide each interval by 4. For example, the interval from 0 to 1 can be divided into fourths as follows:

0 -------- 1/4 -------- 1/2 -------- 3/4 -------- 1

Now, to label 7/4 and 9/4 on this scale, we can extend it by adding another interval from 1 to 2 and dividing it into fourths as well. This would give us the following scale:

0 -------- 1/4 -------- 1/2 -------- 3/4 -------- 1 -------- 5/4 -------- 3/2 -------- 7/4 -------- 2 -------- 9/4 -------- 5/2 -------- 11/4 -------- 3

So we can see that 7/4 is located between 3/4 and 1 on the first interval, and 9/4 is located between 2 and 5/2 on the second interval.

Learn more about whole number

https://brainly.com/question/29766862

#SPJ4

To prove that 12 | n^2 - 1 for all values where n = 6k + 1, we can use modular arithmetic.

First, let's simplify n^2 - 1:

n^2 - 1 = (6k + 1)^2 - 1
= 36k^2 + 12k
= 12(3k^2 + k)

So we need to show that 12 divides (3k^2 + k) for all values of k.

We can use modular arithmetic to prove this. Let's consider k modulo 3:

If k ≡ 0 (mod 3), then 3k^2 + k ≡ 0 (mod 3).
If k ≡ 1 (mod 3), then 3k^2 + k ≡ 4 (mod 3).
If k ≡ 2 (mod 3), then 3k^2 + k ≡ 2 (mod 3).

So in all cases, 3k^2 + k ≡ 0 (mod 3) or 3k^2 + k is divisible by 3.

Now let's consider k modulo 4:

If k ≡ 0 (mod 4), then 3k^2 + k ≡ 0 (mod 4).
If k ≡ 1 (mod 4), then 3k^2 + k ≡ 0 (mod 4).
If k ≡ 2 (mod 4), then 3k^2 + k ≡ 2 (mod 4).
If k ≡ 3 (mod 4), then 3k^2 + k ≡ 0 (mod 4).

So in all cases, 3k^2 + k is divisible by 4 if k is even, and if k is odd then 3k^2 + k is divisible by 2.

Therefore, 3k^2 + k is always divisible by 12, and so n^2 - 1 = 12(3k^2 + k) is always divisible by 12 when n = 6k + 1.

#SPJ11

Learn more on: https://brainly.com/question/28551149

The experimental probability that the next time Audra rolls the number cube, she will roll a 2 is 3/22.

Experimental probability is the ratio of the number of times an event occurs to the total number of trials conducted. In this case, we want to find the experimental probability of rolling a 2.

Looking at the data provided, we can see that Audra rolled a 2 three times out of the total 22 rolls. So, the experimental probability of rolling a 2 can be calculated as:

Experimental probability = number of times the event occurred / total number of trials

Experimental probability of rolling a 2 = 3 / 22

Therefore, the correct option is (B) 3/22. This means that based on Audra's experiment, the probability of rolling a 2 is approximately 0.136 or 13.6%. It is important to note that this is the experimental probability based on a small sample size, and the actual probability of rolling a 2 in a large number of rolls may differ.

To know more about probability,

https://brainly.com/question/30034780

#SPJ11

An expression that represents the length of one side of the square is √(12x/35).

In Mathematics and Geometry, the area of a square can be calculated by using this mathematical equation (formula);

A = x²

Where:

By substituting the given parameters into the formula for the area of a square, we have the following;

-12x + 36x² = x²

36x² - x² = 12x

35x² = 12x

x = √(12x/35)

Read more on expression and square here: https://brainly.com/question/16506342

#SPJ1

Answer:

Step-by-step explanation:

a = b - 7000

0.05a + 0.07b = 1690

Since we have a "value" for a, we can substitute that "value" in place of a.

0.05(b - 7000) + 0.07b = 1690

0.05b - 350 + 0.07b = 1690

0.12b = 2040

b = $17,000

The margin of error is approximately 3.281 Hz, which means that if we were to repeat this study many times, we would expect the sample mean to be within 3.281 Hz of the true population mean in 99% of the studies.

a) The 99% confidence interval can be calculated as:

lower bound = x - t(α/2, n-1) * s/√n

upper bound = x + t(α/2, n-1) * s/√n

where x is the sample mean, s is the sample standard deviation, n is the sample size, and t(α/2, n-1) is the t-score for the given confidence level and degrees of freedom.

Substituting the given values, we get:

lower bound = 6.857 - t(0.005, 13) * 3.367/√14 ≈ 3.576

upper bound = 6.857 + t(0.005, 13) * 3.367/√14 ≈ 10.138

Therefore, the 99% confidence interval for the average brain wave activity is (3.576, 10.138).

b) The margin of error is given by the formula:

margin of error = t(α/2, n-1) * s/√n

Substituting the given values, we get:

margin of error = t(0.005, 13) * 3.367/√14 ≈ 3.281

Therefore, the margin of error for this interval is approximately 3.281.

c) We can interpret this interval as follows: we are 99% confident that the true average brain wave activity of the population of students who did not consume any wine is between 3.576 Hz and 10.138 Hz. The margin of error is approximately 3.281 Hz, which means that if we were to repeat this study many times, we would expect the sample mean to be within 3.281 Hz of the true population mean in 99% of the studies.

To learn more about confidence visit:

https://brainly.com/question/28969535

#SPJ11

Amaya made a mistake because 4 is not equal to 5. She incorrectly wrote 4=5 in the final step of solving the equation 8x+4=9+4(2x-1). So, the correct answer is A).

In step 1, Amaya sets up the equation 8x+4=9+4(2x-1).

In step 2, she simplifies the right side of the equation to 9+8x-4=5+8x.

In step 3, she subtracts 8x from both sides of the equation to get 4=5.

In step 4, she simplifies the equation to 4=9-4.

In step 5, she mistakenly writes that 4=5, which is incorrect.

Therefore, the correct choice is that Amaya made a mistake because 4 is not equal to 5. So, the correct option is A).

To know more about solving the equation:

https://brainly.com/question/23036590

#SPJ1

we have proven that the average degree in a tree is always less than 2.

To prove that the average degree in a tree is always less than 2, we need to first understand what a tree is. A tree is an undirected graph that is connected and acyclic, meaning it does not contain any cycles. Each node in a tree has exactly one parent, except for the root node, which has no parent. The degree of a node in a tree is the number of edges that are connected to it. For the root node, its degree is equal to the number of edges that are connected to its children.

Now, let's consider a tree with n vertices. The total number of edges in a tree is always n-1, since each node except the root node has exactly one incoming edge, and the root node has no incoming edges. Therefore, the sum of the degrees of all the nodes in a tree with n vertices is equal to 2(n-1), since each edge is counted twice, once for each of the nodes it connects.

If we let d_i denote the degree of the i-th node in the tree, then the average degree of the tree can be expressed as:

(1/n) * sum(d_i) = (1/n) * 2(n-1)

Simplifying the right-hand side, we get:

(1/n) * 2(n-1) = 2 - (2/n)

As n approaches infinity, the average degree approaches 2, but for any finite value of n, the average degree is always less than 2. Therefore, we have proven that the average degree in a tree is always less than 2.

To know more about average degree refer here:

https://brainly.com/question/31080273

#SPJ11

The rate of increase in water pressure in  atmospheres 0.000992 atm/km.

To find the rate of increase in water pressure in atm/km, we need to convert the given rate of increase from atm/m to atm/km.

[tex]1 km = 1000 m[/tex]

So, we can convert the given rate of increase as follows:

[tex]0.992 atm/m = (0.992 atm/m)[/tex] × [tex](1000 m/km)[/tex]

[tex]= 992 atm/km[/tex]

Therefore, the rate of increase in water pressure in atm/km is 992 atm/km.

We must convert the stated rate of increase in water pressure from atm/m to atm/km in order to determine the rate of increase in atm/km.

We are aware that 1000 metres make up 1 kilometre. As a result, we can translate the supplied water pressure rise rate from atm/m to atm/km as follows:

[tex]0.000992 atm/km = 0.992 atm/m[/tex] × [tex](1 km/1000 m)[/tex]

0.000992 atm/km is the rate of rise in water pressure as a result.

To learn more about water pressure  visit:

https://brainly.com/question/14421220

#SPJ4

Complete Question:

The water pressure on Mustafa as he dives is increasing at a rate of

0. 992, atmospheres left parenthesis, start text, a, t, m, end text, right parenthesis per meter left parenthesis, start text, m, end text, right parenthesis. What is the rate of increase in water pressure in  atmospheres?

a) The table of probability is given below.

b) The expected number of suits in a 5-card hand dealt from a standard 52-card deck is 2.345.

We have to choose from four suits, so there are 4 ways to choose which suit we will get. After we have chosen a suit, we need to select 5 cards from that suit.  We can choose any combination of 5 cards from 13 cards as there are 13 cards in each suit. We can calculate this by formula for combinations: C(13,5) = 1287.

We can choose any 5 cards from the 52 cards. This can also be calculated by the formula for combinations: C(52,5) = 2598960.

The probability of getting exactly one suit in a 5-card hand will be

= 4 * C(13,5) / C(52,5) = 0.198.

We can fill the table for all possible values of X using similar calculations

value of X     probability

1    |               0.198

2    |             0.422

3    |             0.308

4    |             0.071

We need to multiply each possible value of X by its probability and then add up the results to compute the expected number of suits in a 5-card hand.

E(X) = Σ (X * P(X))

Here Σ denotes the sum over all possible values of X, and P(X) is the probability of getting X suits. When we apply this formula to the table above, we get:

E(X) = 1 * 0.198 + 2 * 0.422 + 3 * 0.308 + 4 * 0.071

= 2.345

This means that if we were to draw many 5-card hands from the deck, we would expect the average number of suits to be around 2.345.

To know more about probability;

brainly.com/question/11234923

#SPJ4

There are 19 orange fish and 12 red fish in the tank. This was found by setting up and solving a system of equations based on the given information.

We can set up a system of equations. Let x be the number of red fish in the tank. We know that the total number of fish is 31, so the number of orange fish must be 31 - x.

We also know that there are 7 more orange fish than half the number of red fish, which can be written as: 31 - x = 7 + 0.5x. Solving for x, we get: 1.5x = 24. x = 16

Hence, there are 16 red fish in the tank. To find the number of orange fish, we can substitute x = 16 into the equation we derived earlier: 31 - 16 = 15. 15 = 7 + 0.5(16). 15 = 15. Hence, there are 15 orange fish in the tank.

Learn more about equations here:

https://brainly.com/question/15707224

#SPJ4

The pages that are filled with stamps ​are 252

From the question, we have the following parameters that can be used in our computation:

Stamps = 900

Empty = 72%

Using the above as a guide, we have the following:

Filled = (1 - Empty) * Stamps

So, we have

Filled = (1 - 72%) * 900

Evaluate

Filled = 252

Hence, 252 are filled

Read more about percentage at

https://brainly.com/question/24877689

#SPJ1

To solve this problem, we can use the formula for combinations, which is:

C(n, k) = n! / (k! * (n-k)!)

where C(n,k) represents the number of combinations of n items taken k at a time.

Using this formula, we can write the given information as an equation:

6 * C(n, 3) = C(n, 2)

Substituting the formula for combinations, we get:

6 * (n! / (3! * (n-3)!)) = (n! / (2! * (n-2)!))

Simplifying this equation, we get:

6 * (n * (n-1) * (n-2)) / 6 = n * (n-1) / 2

Multiplying both sides by 2, we get:

2 * n * (n-1) * (n-2) = 6 * n * (n-1)

Simplifying further, we get:

n * (n-1) * (n-2) = 3 * n * (n-1)

Dividing both sides by n * (n-1), we get:

n-2 = 3

n = 5

Therefore, the value of the constant n is 5.

#SPJ11

Learn more on: https://brainly.com/question/11732255

To find Keegan's optimal consumption bundle of pita wraps and bubble tea, we need to determine the combination that maximizes his utility while staying within his budget of $30. The price of a pita wrap is $6, and the price of a bubble tea is $3.

Step 1: Calculate the maximum quantity of each item Keegan can buy with his budget.
- Pita wraps: $30 / $6 = 5 wraps
- Bubble teas: $30 / $3 = 10 bubble teas

Step 2: List all possible combinations of pita wraps and bubble teas within the budget.
1. 0 wraps and 10 bubble teas
2. 1 wrap and 8 bubble teas
3. 2 wraps and 6 bubble teas
4. 3 wraps and 4 bubble teas
5. 4 wraps and 2 bubble teas
6. 5 wraps and 0 bubble teas

Step 3: Determine the optimal consumption bundle.
Without information about Keegan's preferences, we cannot definitively determine his optimal consumption bundle. However, these six combinations represent all possible bundles that Keegan can purchase with his $30 budget. Keegan's optimal consumption bundle would depend on his personal preferences for pita wraps and bubble teas.

Learn more about optimal consumption:

https://brainly.com/question/29656249

#SPJ11

Your answer: (c) If the procedure were repeated many times, 95% of the resulting confidence intervals would contain the population mean systolic blood pressure.

The correct interpretation of the given confidence interval is (b) 95% of the population of employees have systolic blood pressure between 122-138. This means that if we take multiple samples of the same size from the population, 95% of the confidence intervals we construct from those samples will contain the true population mean systolic blood pressure.

Option (a) is incorrect as it only talks about the sample employees, not the population.

Option (c) is also incorrect as it talks about repeating the procedure of constructing confidence intervals, not the actual population mean systolic blood pressure.

Option (d) is incorrect as it talks about the probability of the population mean, which is not a valid interpretation of a confidence interval.

Option (e) is also incorrect as it talks about the sample means, not the population mean.

Learn more about :

systolic blood pressure : brainly.com/question/12653596

#SPJ11

The minimum sample size required by the economist, if he wants to restrict the margin of error to $480, is 37.

To determine the minimum sample size required to estimate the 99% confidence interval for the average real estate taxes collected by a small town in California with a margin of error of $480, we can use the formula:

[tex]n = \frac{[(z-value)^2 (standard deviation)^2] }{(margin of error)^2}[/tex]

The z-value for a 99% confidence interval is 2.576 (using the z table), and the standard deviation of real estate taxes is $1,330.

Plugging in these values, we get:

[tex]n = \frac{[(2.576)^2 (1,330)^2] }{(480)^2}[/tex]
n = 36.54

Rounding up to the nearest whole number, the minimum sample size required is 37.

To know more about the z-value visit:

https://brainly.com/question/31613365

#SPJ11

In a PivotTable, you can group data by date or number field types. To do this, follow these steps:

1. Select your PivotTable by clicking on any cell within it.
2. Choose the date or number field you want to group.
3. Right-click the selected field and click "Group" from the context menu.
4. In the Grouping dialog box, specify the grouping options based on your preferences (e.g., grouping by months, years, or specific intervals).
5. Click "OK" to apply the grouping.

Please note that grouping data by calculated, filtered, logical parameters, text, incremental, or value field types is not directly supported in a PivotTable.

To learn more about PivotTable

https://brainly.com/question/30154540

#SPJ11

The area of each of the semicircle is approximately:

a. 9.82 in.²       b. 16.08 in.²

A semicircle is half of a full circle. Therefore, the formula to find the area of a semicircle would be:

Area = 1/2(πr²), where r is the radius of the semicircle.

a. The parameters given are:

Diameter = 5 in.

Radius (r) = 5/2 = 2.5 in.

Area of the semicircle = 1/2(π * 2.5²) ≈ 9.82 in.²

b. The parameters given are:

Diameter = 6.4 in.

Radius (r) = 6.4/2 = 3.2 in.

Area of the semicircle = 1/2(π * 3.2²) ≈ 16.08 in.²

Learn more about the semicircle on:

https://brainly.com/question/16274804

#SPJ1

Answer:

The correct answer is:

a. There were 77% of the entries with a score less than 68.

Step-by-step explanation:

The 77th percentile of the distribution of all the scores means that 77% of the entries had a score lower than 68, and 23% had a score equal to or greater than 68.

So option a is the best description of the 77th percentile. Option b is incorrect because it describes the complement of the 77th percentile (i.e., the percentage of entries with a score greater than 68). Option c is incorrect because it describes a single score,

whereas the percentile refers to a percentage of the distribution. Option d is incorrect because it provides a specific number of entries with a score less than 68, which may or may not be true,

but it doesn't address the percentile of the distribution.

To know more about percentile of the distribution, refer here:

https://brainly.com/question/31418543

#SPJ11

The mean replacement time for the quartz timepieces produced by Company XYZ is 15.7 years with a standard deviation of 1.2 years. The company wants to provide a warranty so that only 1.5% of the quartz timepieces will be replaced before the warranty expires.

To find the time length of the warranty, we can use the formula for z-score:

z = (x - μ) / σ

where x is the value, we want to find, μ is the mean, σ is the standard deviation and z is the corresponding z-score.

We can use a z-score table or calculator to find that the z-score corresponding to 1.5% is approximately -2.33.

-2.33 = (x - 15.7) / 1.2

Solving for x gives:

x = 13.9 years (rounded to one decimal place)

Therefore, Company XYZ should provide a warranty of 13.9 years so that only 1.5% of the quartz timepieces will be replaced before the warranty expires.

#SPJ11

Learn more through a similar question: https://brainly.com/question/31170896.

Stephen's net income is $287.78.

Stephen earns $11 per hour at his job and worked for 32 hours. The gross income (income before deduction) is:

gross income = 11 * 32 = $352

Stephen's net income is the money left afer deducting federal income tax, Social Security, and Medicare.

Net income = $352 -  $37.30 -  $21.82 -  $5.10

Net income = $287.78

Learn more about  net income on:

https://brainly.com/question/15530787

#SPJ1

The correct answer is D. 0.1251.

To determine the p-value, we need to perform a hypothesis test.

Step 1: State the null and alternative hypotheses.

The null hypothesis is that the proportion of the population in favor of Candidate A is 75%.

H0: p = 0.75

The alternative hypothesis is that the proportion of the population in favor of Candidate A is significantly more than 75%.

Ha: p > 0.75

Step 2: Determine the level of significance (alpha).

We are not given a level of significance in the problem statement, so we will assume a level of significance of 0.05.

Step 3: Calculate the test statistic.

We will use the sample proportion, P, to calculate the test statistic:

P = 80/100 = 0.8

The sample size is n = 100, so the standard error of the sample proportion is:

SE = sqrt[p(1-p)/n]

SE = sqrt[0.75(1-0.75)/100]

SE = 0.0433

The test statistic is:

z = (P - p) / SE

z = (0.8 - 0.75) / 0.0433

z = 1.15

Step 4: Calculate the p-value.

We will use the standard normal distribution to calculate the p-value:

p-value = P(Z > 1.15)

p-value = 0.1251

Step 5: Make a decision and interpret the results.

Since the p-value (0.1251) is greater than the level of significance (0.05), we fail to reject the null hypothesis. This means that we do not have sufficient evidence to conclude that the proportion of the population in favor of Candidate A is significantly more than 75%.

Therefore, the correct answer is D. 0.1251.

To learn more about significantly visit:

https://brainly.com/question/14789537

#SPJ11

If Amy wants to go to the place that has the highest typical temperature and the least variability, she should visit C. Destin.

Destin has one of the highest temperatures as it reaches about 95 degrees. This is the second highest of all the places and so can be one of the places to visit.

Destin has a variability (using range) of :

= 95 - 83

= 12 degrees

Pensacola Beach on the other hand, is:

= 98 - 80

= 18 degrees

Destin has the lower variability.

Find out more on variability at https://brainly.com/question/14897400

#SPJ1

Jackson will have 112 cards in his collection after 7 years. The Option D is correct.

The difference between the number of cards in year 2 and year 3 is:

= 48 - 32

= 16

Note: Its covers a span of 3 - 2 = 1 year. Therefore, the average number of cards added per year between years 2 and 3 is 16/1 = 16.

Now we can estimate the number of cards Jackson will have in year 7 by stating the following formula:

= Number of cards in year 5 + (Average number of cards added per year) x (Number of years from year 5 to year 7)

= 80 + 16 x (7 - 5)

= 80 + 32

= 112 cards

Read more about cards

brainly.com/question/28714039

#SPJ1

Answer:

44 degrees

Step-by-step explanation:

To solve this problem you can subtract 70 by 26. You can do this because those two angles add to the more significant angle. Therefore, to solvr this all you have to do is subtract 70-26. Doing so gives you your answer of 44 degrees