Angel made a table runner that has an area of 80 square inches. The length and width of the table runner are whole numbers. The length is 5 times greater than the width. What are the dimensions of the table runner?

Therefore, it will take 173 months to pay off the loan, or approximately 14 years and 5 months.

A percentage is a way of expressing a number as a fraction of 100. The symbol for a percentage is "%". For example, 50% is the same as 50/100 or 0.5 as a decimal. Percentages are often used to express a portion or share of a whole. For instance, if you scored 90% on a test, it means you got 90 out of 100 possible points. In finance, percentages are commonly used to express interest rates, returns on investments, or changes in stock prices.

First, we need to convert the monthly interest rate from a percentage to a decimal by dividing by 100.

0.25% / 100 = 0.0025

Now we can plug in the values into the formula:

N= (-log⁡ (1-0.0025*70000/250))/ (log⁡ (1+0.0025))

Simplifying the equation in the parentheses:

N= (-log⁡ (1-175))/ (log⁡ (1.0025))

N= (-log⁡ (0.9964))/ (0.002499)

N= 172.9

Rounding up to the nearest whole number since we can't make partial payments:

N= 173

To learn more about percentage, visit

https://brainly.com/question/29306119

#SPJ1

The formula g(x) = 2 * 0{-10≤x+3≤10} represents a function that has been horizontally shifted left by 3 units, reflected about the y-axis, and vertically scaled by a factor of 2.

A function is a mathematical rule that assigns each input from a set (domain) a unique output from another set (range), typically written as y = f(x).

The notation "0{-10≤x≤10}" typically represents the domain of a function or an inequality. It means that the function is defined only for the values of x that are between -10 and 10 (including -10 and 10).

Assuming that the function in question is a constant function equal to zero, the parent function is f(x) = 0.

To describe the transformations that happened to this function, we need more information about the specific formula. For example, if the formula is:

g(x) = 0{-10≤x≤10}

Then there are no transformations from the parent function. The function is simply a constant function that is equal to zero over the interval [-10, 10].

However, if the formula is something like:

g(x) = 2 * 0{-10≤x+3≤10}

Then we can describe the transformations as follows:

Horizontal translation: The function has been shifted horizontally to the left by 3 units. This means that the point (3, 0) on the parent function is now located at the origin (0, 0) on the transformed function.

Dilation/reflection: The function has been reflected about the y-axis and vertically scaled by a factor of 2. This means that the point (-1, 0) on the parent function is now located at (-4, 0) on the transformed function, and the point (1, 0) on the parent function is now located at (2, 0) on the transformed function.

Vertical translation: There is no vertical translation in this case, since the constant function is already centered at y = 0.

To summarize, the formula g(x) = 2 * 0{-10≤x+3≤10} represents a function that has been horizontally shifted left by 3 units, reflected about the y-axis, and vertically scaled by a factor of 2.

To know more about Function visit :

https://brainly.com/question/12431044

#SPJ1

The formula g(x) = 2 * 0{-10≤x+3≤10} represents a function that has been horizontally shifted left by 3 units, reflected about the y-axis, and vertically scaled by a factor of 2.

A function is a mathematical rule that assigns each input from a set (domain) a unique output from another set (range), typically written as y = f(x).

The notation "0{-10≤x≤10}" typically represents the domain of a function or an inequality. It means that the function is defined only for the values of x that are between -10 and 10 (including -10 and 10).

Assuming that the function in question is a constant function equal to zero, the parent function is f(x) = 0.

To describe the transformations that happened to this function, we need more information about the specific formula. For example, if the formula is:

g(x) = 0{-10≤x≤10}

Then there are no transformations from the parent function. The function is simply a constant function that is equal to zero over the interval [-10, 10].

However, if the formula is something like:

g(x) = 2 * 0{-10≤x+3≤10}

Then we can describe the transformations as follows:

Horizontal translation: The function has been shifted horizontally to the left by 3 units. This means that the point (3, 0) on the parent function is now located at the origin (0, 0) on the transformed function.

Dilation/reflection: The function has been reflected about the y-axis and vertically scaled by a factor of 2. This means that the point (-1, 0) on the parent function is now located at (-4, 0) on the transformed function, and the point (1, 0) on the parent function is now located at (2, 0) on the transformed function.

Vertical translation: There is no vertical translation in this case, since the constant function is already centered at y = 0.

To summarize, the formula g(x) = 2 * 0{-10≤x+3≤10} represents a function that has been horizontally shifted left by 3 units, reflected about the y-axis, and vertically scaled by a factor of 2.

To know more about Function visit :

brainly.com/question/12431044

#SPJ1

The range is the best measure of variability for this data, and its value is 4.

The line plot displays the number of roses purchased per day at a grocery store, with the data values ranging from 0 to 4 (since there are no dots above 4).

The best measure of variability for this data is the range, which is the difference between the maximum and minimum values in the data set. In this case, the minimum value is 0 and the maximum value is 4, so the range is:

Range = Maximum value - Minimum value = 4 - 0 = 4

Therefore, the range is the best measure of variability for this data, and its value is 4.

to know more about range

brainly.com/question/29452843

#SPJ1

Answer:

a) To find out how big of a loan you can afford, we can use the formula for the monthly payment of a mortgage:

M = P [ i(1 + i)^n ] / [ (1 + i)^n - 1 ]

where M is the monthly payment, P is the principal (the amount borrowed), i is the monthly interest rate (which is the annual interest rate divided by 12), and n is the number of monthly payments (which is the number of years times 12).

In this case, we know that M = $1,000, i = 0.053/12, and n = 30 x 12 = 360. We want to solve for P, the principal we can afford.

Substituting these values into the formula, we get:

$1,000 = P [ 0.004416(1 + 0.004416)^360 ] / [ (1 + 0.004416)^360 - 1 ]

Simplifying and solving for P, we get:

P = $183,928.72

Therefore, you can afford a loan of approximately $183,928.72.

b) The total money paid to the loan company will be the monthly payment multiplied by the number of payments over the life of the loan. In this case, we have:

Total money paid = $1,000 x 360 = $360,000

Therefore, the total amount of money paid to the loan company will be $360,000.

c) To find out how much of that money is interest, we can subtract the principal from the total amount paid. In this case, we have:

Interest paid = Total money paid - Principal = $360,000 - $183,928.72 = $176,071.28

Therefore, the amount of money paid in interest will be $176,071.28.

Answer:

Step-by-step explanation:

The distance formula is

[tex]d=\sqrt{(x_2-x_1)^2+(y_2-y_1)^2}[/tex]

x1 is a,

x2 is 0,

y1 is 0 and

y2 is b. Fitting those into the formula where they belong:

[tex]d=\sqrt{(0-a)^2+(b-0)^2}[/tex] and

[tex]d=\sqrt{(-a)^2+(b)^2}[/tex]

Since a negative squared is a positive, then

[tex]d=\sqrt{a^2+b^2}[/tex]

which is the second choice down.

Answer:

1.2974634e+14

Step-by-step explanation:

ye

f(x) is concave up on the interval (-∞, √(6/7)) U (√(6/7), ∞),f(x) is concave down on the interval (-√(6/7), √(6/7)) ,The inflection points occur at x = -√(6/7) and x = √(6/7).

An inflection point is a point on a curve where the concavity changes, from concave up to concave down or vice versa, indicating a change in the curvature of the curve.

According to the given information:

To determine the intervals where f(x) is concave up or down, we need to find the second derivative of f(x) and determine its sign.

First, we find the first derivative of f(x):

f'(x) = (14x)/(7x²+6)²

Then, we find the second derivative of f(x):

f''(x) = [28(7x²+6)²- 28x(7x²+6)(4x)] / (7x²+6)^4

Simplifying the expression, we get:

f''(x) = 28(42x² - 72) / (7x^2+6)³

To determine where f(x) is concave up or down, we need to find the intervals where f''(x) is positive or negative, respectively.

Setting f''(x) = 0, we get:

42x² - 72 = 0

Solving for x, we get:

x = ±√(6/7)

These are the possible inflection points of f(x). To determine if they are inflection points, we need to check the sign of f''(x) on both sides of each point.

We can use a sign chart to determine the sign of f''(x) on each interval.

Intervals where f''(x) > 0 are where f(x) is concave up, and intervals where f''(x) < 0 are where f(x) is concave down.

Here is the sign chart for f''(x):

x  |   -∞   | -√(6/7) | √(6/7) |   ∞

f''(x)|   -    |     +      |     -     |   +

From the sign chart, we can see that:

a) f(x) is concave up on the interval (-∞, √(6/7)) U (√(6/7), ∞).

b) f(x) is concave down on the interval (-sqrt(6/7), √(6/7)).

c) The inflection points occur at x = -√(6/7) and x = √(6/7).

Therefore, the open intervals where f(x) is concave up are (-∞, -√(6/7)) and (√(6/7), ∞), and the open interval where f(x) is concave down is (-√(6/7), √(6/7)). The inflection points occur at x = -√(6/7) and x = √(6/7).

To know more about inflection point visit :

https://brainly.com/question/30760634

#SPJ1

The f(x) is concave up on the interval (-∞, √(6/7)) U (√(6/7), ∞),f(x) is concave down on the interval (-√(6/7), √(6/7)) ,The inflection points occur at x = -√(6/7) and x = √(6/7).

What is inflection Point?

An inflection point is a point on a curve where the concavity changes, from concave up to concave down or vice versa, indicating a change in the curvature of the curve.

According to the given information:

To determine the intervals where f(x) is concave up or down, we need to find the second derivative of f(x) and determine its sign.

First, we find the first derivative of f(x):

f'(x) = (14x)/(7x²+6)²

Then, we find the second derivative of f(x):

f''(x) = [28(7x²+6)²- 28x(7x²+6)(4x)] / (7x²+6)^4

Simplifying the expression, we get:

f''(x) = 28(4x² - 72) / (7x^2+6)³

To determine where f(x) is concave up or down, we need to find the intervals where f''(x) is positive or negative, respectively.

Setting f''(x) = 0, we get:

42x² - 72 = 0

Solving for x, we get:

x = ±√(6/7)

These are the possible inflection points of f(x). To determine if they are inflection points, we need to check the sign of f''(x) on both sides of each point.

We can use a sign chart to determine the sign of f''(x) on each interval.

Intervals where f''(x) > 0 are where f(x) is concave up, and intervals where f''(x) < 0 are where f(x) is concave down.

Here is the sign chart for f''(x):

x  |   -∞   | -√(6/7) | √(6/7) |   ∞

f''(x)|   -    |     +      |     -     |   +

From the sign chart, we can see that:

a) f(x) is concave up on the interval (-∞, √(6/7)) U (√(6/7), ∞).

b) f(x) is concave down on the interval (-sqrt(6/7), √(6/7)).

c) The inflection points occur at x = -√(6/7) and x = √(6/7).

Therefore, the open intervals where f(x) is concave up are (-∞, -√(6/7)) and (√(6/7), ∞), and the open interval where f(x) is concave down is (-√(6/7), √(6/7)). The inflection points occur at x = -√(6/7) and x = √(6/7).

To know more about inflection point visit :

https://brainly.com/question/30760634

#SPJ1

Therefore , the solution of the given problem of probability comes out to be a)1/78 ,b)65/624 ,c)1/4 ,d)0 and e)12/13.

The basic goal of any considerations technique is to assess the probability that a statement is accurate or that a specific incident will occur. Chance can be represented by any number range between 0 and 1, where 0 normally indicates a percentage but 1 typically indicates the level of certainty. An illustration of probability displays how probable it is that a specific event will take place.

Here,

a.

P(Bert gets a Jack and Ernie rolls a five) = P(Bert gets a Jack) * P(Ernie rolls a five)

= (4/52) * (1/12)

= 1/78

b.

P(Bert gets a heart and Ernie rolls a number less than six) = P(Bert gets a heart) * P(Ernie rolls a number less than six)

= (13/52) * (5/12)

= 65/624

c.

P(Bert gets a face card and Ernie rolls an even number) = P(Bert gets a face card) * P(Ernie rolls an even number)

= (12/52) * (6/12)

= 1/4

d.

P(Bert gets a red card and Ernie rolls a fifteen) = 0

e.

Ernie rolls a number that is not twelve, and Bert draws a card that is not a Jack:

A regular 52-card deck contains 48 cards that are not Jacks,

so the likelihood that Bert will draw one of those cards is 48/52, or 12/13.

On a 12-sided dice with 11 possible outcomes,

Ernie rolls a non-12th-number (1, 2, 3, etc.).

To know more about probability visit:

https://brainly.com/question/11234923

#SPJ1

The degree measure of the angles are;

1. 5π/3 = 300°

2 3π/4 = 135°

3. 5π/6 = 150°

4. -3π/2 = 90°

A degree is a unit of measurement which is used to measure circles, spheres, and angles while a radian is also a unit of measurement which is used to measure angles.

A circle has 360 degrees which are its full area while its radian is only half of it which is 180 degrees or one pi radian.

therefore π = 180°

1. 5π/ 3 = 5×180/3 = 300°

2. 3π/4 = 3× 180/4 = 540/4 = 135°

3. 5π/6 = 5×180/6 = 150°

4. - 3π/2 = -3 × 180/2 = -270° = 90°

learn more about degree and radian from

https://brainly.com/question/22689613

#SPJ1

The required graph of the function given; h (x) has been attached.

In mathematics, graph theory is the study of graphs, which are mathematical structures used to represent pairwise interactions between objects. In this definition, a network is made up of nodes or points called vertices that are connected by edges, also called links or lines. In contrast to directed graphs, which have edges that connect two vertices asymmetrically, undirected graphs have edges that connect two vertices symmetrically. Graphs are one of the primary areas of study in discrete mathematics.

Here as per the question the graph of the function, h (x) has been attached.

To know more about graphs, visit:

brainly.com/question/17267403

#SPJ1

yes is answer   for all option   .we can check it by rules of rounding off numbers .

what is rounding ?

Rounding is the process of approximating a number to a nearby value that is easier to work with or more appropriate for a given context. When rounding, we take a number with many decimal places or significant figures and adjust it to a simpler or more convenient value with fewer decimal places or significant figures.

In the given question,

Yes, each number is rounded correctly to the nearest hundred thousand based on the rules of rounding.

To round to the nearest hundred thousand, we look at the digit in the hundred thousand place and the digit to its right (i.e., in the ten thousand place).

If the digit in the ten thousand place is 5 or greater, we round up the digit in the hundred thousand place by adding 1.

If the digit in the ten thousand place is less than 5, we leave the digit in the hundred thousand place as it is.

Using these rules, we can see that:

350000 rounded to the nearest hundred thousand is 400000 because the digit in the ten thousand place is 5, so we round up the digit in the hundred thousand place.

555555 rounded to the nearest hundred thousand is 560000 because the digit in the ten thousand place is 5, so we round up the digit in the hundred thousand place.

137998 rounded to the nearest hundred thousand is 200000 because the digit in the ten thousand place is 7, so we round up the digit in the hundred thousand place.

792314 rounded to the nearest hundred thousand is 800000 because the digit in the ten thousand place is 3, so we leave the digit in the hundred thousand place as it is.

To know more about rounding , visit:

https://brainly.com/question/29878750

#SPJ1

Answer: We can use the two given points to find the equation of the line and then plug in 39 for the calling time to find the corresponding monthly cost.

Let x be the calling time (in minutes) and y be the monthly cost (in dollars). Then we have the following two points:

(x1, y1) = (35, 16.83)

(x2, y2) = (52, 18.87)

The slope of the line passing through these two points is:

m = (y2 - y1) / (x2 - x1) = (18.87 - 16.83) / (52 - 35) = 0.27

Using point-slope form with the first point, we get:

y - y1 = m(x - x1)

y - 16.83 = 0.27(x - 35)

Simplifying, we get:

y = 0.27x + 7.74

Therefore, the monthly cost for 39 minutes of calls is:

y = 0.27(39) + 7.74 = $18.21

Step-by-step explanation:

This problem involves integration and algebraic manipulation, and belongs to the subject of calculus. The solutions are:

[tex]A) $\int_{0}^{2} (f(x) + g(x)) dx = -3$[/tex]
[tex]B) $\int_{0}^{3} (f(x) - g(x)) dx = -4$[/tex]
[tex]C) $\int_{2}^{3} (3f(x) + g(x)) dx = -32$[/tex]

This is a problem that asks us to find the values of some definite integrals using given values of other definite integrals. We are given three definite integrals, and we are asked to compute three other integrals involving the same functions, using the given values.

The problem involves some algebraic manipulation and the use of the linearity of the integral.

It also involves finding the constant "a" that makes a definite integral equal to zero. The integral involves two functions, "f(x)" and "g(x)," whose definite integrals over certain intervals are also given.

See the attached for the full solution.

Learn more about integration at:

https://brainly.com/question/18125359

#SPJ1

Answer:

3.14 cm^2

Step-by-step explanation:

1. Find radius:

If diameter is 2, divide it by 2 to get radius = 1

2. Find formula:

A=πr^2

3. Plug in:

A = π(1)^2

4. Solve (multiply):

A = π(1)^2:

3.14159265359

Or

3.14 cm^2

Answer:

3.14 cm^2

Step-by-step explanation:

A=[tex]\pi[/tex]r^2

r=2

2/2=1

A=[tex]\pi[/tex](1)^2

=[tex]\pi[/tex]1

≈3.14x1

≈3.14cm^2

Answer:

mean = 24

Step-by-step explanation:

the mean is calculated as

mean = [tex]\frac{sum}{count}[/tex]

the sum of the data set is

sum = 12 + 13 + 15 + 28 + 28 + 30 + 42 = 168

there is a count of 7 in the data set , then

mean = [tex]\frac{168}{7}[/tex] = 24

Answer:

a) To solve the differential equation y''-2y'-3y= e^4x, we first find the characteristic equation:

r^2 - 2r - 3 = 0

Factoring, we get:

(r - 3)(r + 1) = 0

So the roots are r = 3 and r = -1.

The general solution to the homogeneous equation y'' - 2y' - 3y = 0 is:

y_h = c1e^3x + c2e^(-x)

To find the particular solution, we use the method of undetermined coefficients. Since e^4x is a solution to the homogeneous equation, we try a particular solution of the form:

y_p = Ae^4x

Taking the first and second derivatives of y_p, we get:

y_p' = 4Ae^4x

y_p'' = 16Ae^4x

Substituting these into the original differential equation, we get:

16Ae^4x - 8Ae^4x - 3Ae^4x = e^4x

Simplifying, we get:

5Ae^4x = e^4x

So:

A = 1/5

Therefore, the particular solution is:

y_p = (1/5)*e^4x

The general solution to the non-homogeneous equation is:

y = y_h + y_p

y = c1e^3x + c2e^(-x) + (1/5)*e^4x

b) To solve the differential equation y'' + y' - 2y = 3xe^x, we first find the characteristic equation:

r^2 + r - 2 = 0

Factoring, we get:

(r + 2)(r - 1) = 0

So the roots are r = -2 and r = 1.

The general solution to the homogeneous equation y'' + y' - 2y = 0 is:

y_h = c1e^(-2x) + c2e^x

To find the particular solution, we use the method of undetermined coefficients. Since 3xe^x is a solution to the homogeneous equation, we try a particular solution of the form:

y_p = (Ax + B)e^x

Taking the first and second derivatives of y_p, we get:

y_p' = Ae^x + (Ax + B)e^x

y_p'' = 2Ae^x + (Ax + B)e^x

Substituting these into the original differential equation, we get:

2Ae^x + (Ax + B)e^x + Ae^x + (Ax + B)e^x - 2(Ax + B)e^x = 3xe^x

Simplifying, we get:

3Ae^x = 3xe^x

So:

A = 1

Therefore, the particular solution is:

y_p = (x + B)e^x

Taking the derivative of y_p, we get:

y_p' = (x + 2 + B)e^x

Substituting back into the original differential equation, we get:

(x + 2 + B)e^x + (x + B)e^x - 2(x + B)e^x = 3xe^x

Simplifying, we get:

-xe^x - Be^x = 0

So:

B = -x

Therefore, the particular solution is:

y_p = xe^x

The general solution to the non-homogeneous equation is:

y = y_h + y_p

y = c1e^(-2x) + c2e^x + xe^x

c) To solve the differential equation y" - 9y' + 20y = x^2*e^4x, we first find the characteristic equation:

r^2 - 9r + 20 = 0

Factoring, we get:

(r - 5)(r - 4) = 0

So the roots are r = 5 and r = 4.

The general solution to the homogeneous equation y" - 9y' + 20y = 0 is:

y_h = c1e^4x + c2e^5x

To find the particular solution, we use the method of undetermined coefficients. Since x^2*e^4x is a solution to the homogeneous equation, we try a particular solution of the form:

y_p = (Ax^2 + Bx + C)e^4x

Taking the first and second derivatives of y_p, we get:

y_p' = (2Ax + B)e^4x + 4Axe^4x

y_p'' = 2Ae^4x +

The similes in the story are:

A simile is a figure of speech that compares two things using the words "like" or "as." It is a type of metaphor that helps to create a vivid and engaging image in the reader or listener's mind.

Similes are often used in literature, poetry, and everyday language to make a comparison more relatable and understandable. For example, "He is as brave as a lion" or "She sings like an angel." These similes help to convey a certain quality or trait by comparing it to something else that is well-known or familiar.

Note: It seems there may be a typo in the last sentence of the story, where the word "e" appears instead of "elephant" or another word that would make sense in context.

Read more about similes here:

https://brainly.com/question/2416704

#SPJ1

The value of Tanθ is 20/21.

What is Pythagorean Theorem?

A right triangle's three sides are related in Euclidean geometry by the Pythagorean theorem, also known as Pythagoras' theorem. According to this statement, the areas of the squares on the other two sides add up to the size of the square whose side is the hypotenuse.

Here, we have

Given: sinθ = -20/29 and that angle terminates in quadrant III.

We have to find the value of tanθ.

Using the definition of sine to find the known sides of the unit circle right triangle. The quadrant determines the sign on each of the values.

Sinθ = Perpendicular/hypotenuse

Find the adjacent side of the unit circle triangle. Since the hypotenuse and opposite sides are known, use the Pythagorean theorem to find the remaining side.

Adjacent = - √Hypotenuse² - perpenducualr²

Replace the known values in the equation.

Adjacent = -√29² - (-20)²

Adjacent = -21

Find the value of tangent.

Tanθ = Perpendicular/base

Tanθ = -20/(-21)

Hence, the value of Tanθ is 20/21.

To learn more about the Pythagorean Theorem from the given link

https://brainly.com/question/28981380

#SPJ1

Therefore, the answer is (A) 7x-9 when it is given that function F(x) = 4x - 8 and g(x) = -3x + 1.

In mathematics, a function is a relationship between two sets of values, where each input (or domain element) is associated with a unique output (or range element). In other words, a function is a rule or a process that takes an input (or inputs) and produces a corresponding output. Functions can be expressed using various mathematical notations, such as algebraic formulas, graphs, tables, or even verbal descriptions. They are widely used in many fields of mathematics, science, engineering, economics, and computer science, to model and solve problems that involve relationships between variables or quantities.

Here,

To find (f - g)(x), we need to subtract g(x) from f(x), so we get:

(f - g)(x) = f(x) - g(x)

Substituting the given functions, we get:

(f - g)(x) = (4x - 8) - (-3x + 1)

Simplifying the expression by distributing the negative sign, we get:

(f - g)(x) = 4x - 8 + 3x - 1

Combining like terms, we get:

(f - g)(x) = 7x - 9

To know more about function,

https://brainly.com/question/28193995

#SPJ1

Answer: 5 * 5 = 20

20 divided by 1 = 20

If there are 5 apples with an apple:orange ratio of 1:4, there are 20 oranges.

The truth table for (A ⋁ B) ⋀ ~(A ⋀ B) is:

A   B   (A ⋁ B) ⋀ ~(A ⋀ B)

0   0                0

0    1                0

1     0               0

1     1                0

A truth table is a table that displays all possible combinations of truth values (true or false) for one or more propositions or logical expressions, as well as the truth value of the resulting compound proposition or expression that is created by combining them using logical operators like AND, OR, NOT, IMPLIES, etc.

The columns of a truth table reflect the propositions or expressions themselves as well as the compound expressions created by applying logical operators to them. The rows of a truth table correspond to the various possible combinations of truth values for the propositions or expressions.

To complete the truth table for (A ⋁ B) ⋀ ~(A ⋀ B), we need to consider all possible combinations of truth values for A and B.

A   B   A ⋁ B   A ⋀ B   ~(A ⋀ B)   (A ⋁ B) ⋀ ~(A ⋀ B)

0   0      0            0             1                      0

0    1       1            0             1                      0

1    0       1            0             1                      0

1    1        1             1             0                     0

So, the only case where the expression is true is when both A and B are true, and for all other cases it is false.

To know more about truth tables, visit:

https://brainly.com/question/31482105

#SPJ1

An observation is considered an outlier if it is below 35.5 or above 79.5 in this dataset.

To determine the outliers in a dataset using the five-number summary, we need to calculate the interquartile range (IQR), which is the difference between the third quartile (Q3) and the first quartile (Q1).

IQR = Q3 - Q1

Where

Q1 = 52

Q3 = 63

So, we have

IQR = 63 - 52

IQR = 11

An observation is considered an outlier if it is:

Below Q1 - 1.5 × IQR

Above Q3 + 1.5 × IQR

Substituting the values, we get:

Below 52 - 1.5 × 11 = 35.5

Above 63 + 1.5 × 11 = 79.5

Therefore, an observation is considered an outlier if it is below 35.5 or above 79.5 in this dataset.

Read more about outliers at

https://brainly.com/question/27893355

#SPJ1

Answer:

...............................

Answer:

They are collinear if they are on the same line

40% of Canadians read at least 10 books a year.

A percentage is a way of expressing a portion or a part of a whole as a fraction of 100. It is represented by the symbol "%". Percentages are often used to compare different quantities or to describe how much of a total is made up by a specific amount or group. For example, if you score 80 out of 100 on a test, your score can be expressed as 80%, meaning you got 80 out of 100 possible points.

If two out of every five Canadians read at least 10 books a year, then we can write this as a fraction:

2/5

We can multiply this fraction by 100 to turn it to a percentage:

(2/5) x 100 = 40%

Therefore, 40% of Canadians read at least 10 books a year.

To know more about fraction, visit:

https://brainly.com/question/10354322

#SPJ1

The two consecutive natural numbers whose sum of squares is 181 are 9 and 10

Let's assume that the two consecutive natural numbers are x and x+1. Then, we can write an equation based on the given information:

x² + (x+1)² = 181

Expanding the equation:

x² + x² + 2x + 1 = 181

Combining like terms:

2x² + 2x - 180 = 0

Dividing both sides by 2:

x² + x - 90 = 0

Now, we can use the quadratic formula to solve for x:

x = (-b ± √(b² - 4ac)) / 2a

where a = 1, b = 1, and c = -90

x = (-1 ± √(1 + 360)) / 2

x = (-1 ± √(361)) / 2

x = (-1 ± 19) / 2

We discard the negative value, as it does not correspond to a natural number:

x = 9

Therefore, the two consecutive natural numbers are 9 and 10, and their sum of squares is 81 + 100 = 181.

To learn more about integers click on,

https://brainly.com/question/17491372

#SPJ1

The radius of the cylinder is approximately 6.75 inches.

We can use the formula for the volume of a cylinder to solve this problem:

[tex]V = \pi r^2h[/tex]

We know that the volume V is 2,035.75 [tex]in^3[/tex], and the height h is 3 times the radius r. So we can write:

[tex]V = \pi r^2(3r)[/tex]

Simplifying this expression, we get:

V = 3π[tex]r^3[/tex]

To solve for r, we can divide both sides of the equation by 3π[tex]r^2[/tex]:

V/(3π[tex]r^2[/tex]) = r

Substituting the given value for V, we have:

2,035.75/(3π[tex]r^2[/tex]) = r

Multiplying both sides by 3πr^2, we get:

2,035.75 = 3π[tex]r^3[/tex]

Dividing both sides by 3π, we have:

[tex]r^3[/tex] = 2,035.75 / (3π)

Taking the cube root of both sides, we get:

r = [tex](2,035.75 / (3\pi ))^{1/3[/tex]

Using a calculator, we find that:

r ≈ 6.75 inches

Therefore, The cylinder has a radius of about 6.75 inches.

know more about volume visit :

https://brainly.com/question/13338592

#SPJ1

The polynomial in factor form is y(x) = - (1 / 6) · (x + 3) · (x + 1) · (x - 2) · (x - 3).

In this problem we find a representation of polynomial set on Cartesian plane, whose expression is described by the following formula in factor form:

y(x) = a · (x - r₁) · (x - r₂) · (x - r₃) · (x - r₄)

Where:

Then, by direct inspection we get the following information:

y(0) = - 3, r₁ = - 3, r₂ = - 1, r₃ = 2, r₄ = 3

First, determine the lead coefficient:

- 3 = a · (0 + 3) · (0 + 1) · (0 - 2) · (0 - 3)

- 3 = a · 3 · 1 · (- 2) · (- 3)

- 3 = 18 · a  

a = - 1 / 6

Second, write the complete expression:

y(x) = - (1 / 6) · (x + 3) · (x + 1) · (x - 2) · (x - 3)

To learn more on polynomials: https://brainly.com/question/29260355

#SPJ1

The control group for the experiment would be option C: some plants will receive no sunlight.

The control group in an experiment is the group that does not receive the treatment or intervention being tested, so that the effects of the treatment can be compared to a baseline or reference point. In this experiment, the treatment being tested is the provision of sunlight as an energy source for plant growth.

Therefore, the control group should not receive sunlight, so that the effects of sunlight can be compared to the baseline of plant growth without sunlight.

Therefore, the control group for the experiment would be option C: some plants will receive no sunlight.

Learn more about control group here : brainly.com/question/24163400

#SPJ1