glaciers
thid is because its big on both sides
Glaciers are large masses of very thick ice found above the snow line.
What is a glacier?A glacier is a large, long-lasting mass of ice that forms on land and flows downhill due to the accumulation of snow and ice. It's basically a frozen river of ice that can stretch for miles and is constantly changing shape and size. A glacier can only form when snow and ice accumulation exceed the amount of snow and ice that melt away, and this process can take hundreds or thousands of years. Glaciers can be classified as alpine or valley glaciers, which form in high-altitude areas with cold temperatures and heavy snowfall, or ice sheets, which form in polar regions and can cover entire continents. Glaciers can be found all over the world, from the polar ice caps to the highest mountains on every continent. Glaciers play a significant role in shaping the landscape and are also an important source of freshwater.
Learn more about glacier here: https://brainly.com/question/6666513
#SPJ11
of the seven continents, which is the only permanently inhabited one that does not currently have a monarchy?
Of the seven continents, Australia is the only permanently inhabited one that does not currently have a monarchy. In Australia, the government operates as a parliamentary democracy and a constitutional monarchy.
The head of state is the monarch of the United Kingdom, who is represented in Australia by the Governor-General. However, the monarch does not have any real power in the country and the government is run by elected officials.
The indigenous Australians were the first inhabitants of the continent, and their cultures and traditions have been respected and preserved by the government.
The legislative branch is made up of the Senate and the House of Representatives, and the executive branch is led by the Prime Minister and the Cabinet. Australia has a strong economy and a high standard of living, and it is recognized as a leader in areas such as healthcare, education, and environmental protection.
For such more question on Australia:
https://brainly.com/question/2322594
#SPJ11
A stream or river is a body of water flowing in a __________.
A stream or river is a body of water flowing in a channel.
A stream is a small river that can be crossed by wading or hopping from one bank to the other. If the stream is fed by underground water sources or has a large volume of water, it might be deep enough to require a bridge. The water in a stream or river usually flows downhill due to gravity, but it may also flow from high to low pressure or from an area of high elevation to one of lower elevation.
The movement of a river is aided by the slope of the ground, the size and position of rocks and other debris in its bed, and the amount and speed of water in the river. The soil composition and the landscape through which it flows will also influence the river's flow. The banks of a river or stream are often eroded by the water's movement, and the water may transport soil, rocks, and other debris downstream. This process aids in the formation of canyons, gorges, and other geologic formations.
Learn more about stream here: https://brainly.com/question/8282980
#SPJ11
Match the damage to a house to the correct Fuijita scale classification.1. F32. F13. F54. F0___ roof damage___ wall collapse___ house blown away___ little damage
The match of the damage to a house to the correct Fujita scale classification is given below:
F1 roof damage
F3 wall collapse
F5 house blown away
F0 little damage
The Fujita scale is used to categorize tornadoes based on the intensity of the tornado.
The Fujita scale is a classification system for measuring the intensity of tornadoes based on the damage they cause to buildings and vegetation. The Fujita Scale was designed in 1971 by Ted Fujita, a professor at the University of Chicago, and was first used in the United States in 1973. The scale ranges from F0 (weakest) to F5 (strongest).
The reason for the matching is the level of damage associated with each Fujita scale category. The higher the number, the more severe the damage. Here's the explanation:
F0: Little damage (light damage to trees, signs, and buildings;)
F1: Roof damage (moderate damage to roofs, windows, and vehicles)
F3: Wall collapse (severe damage to walls, roofs, and large trees)
F5: House has blown away (total destruction of houses and buildings)
More about Fujita Scale:
https://brainly.com/question/14455112
#SPJ11
mapping does not: group of answer choices provide a baseline against which to measure the impact of improvement efforts. define the boundaries of a process. provide a detailed view of all elements external to the process. create a common understanding of the content of a process.
Mapping does not provide a detailed view of all elements external to the process. Therefore the correct option is option C.
Mapping is a representation of something on paper that is simplified or reduced to its essential characteristics. Mapping is the process of graphically portraying the entire business process to give a visual perspective of how it functions in practice.
The advantages of Mapping are as follows: Maps can be used to simplify complicated concepts or interactions. Maps can assist in the detection of mistakes or improvement areas. Maps provide a clear picture of who is involved, what they do, and how their work connects to the rest of the organization.
Maps help to create a shared understanding and language. A baseline is a reference point or a standard against which something can be assessed or measured. Mapping does not provide a detailed view of all elements external to the process. Therefore the correct option is option C.
For such more question on Mapping:
https://brainly.com/question/28416579
#SPJ11
The following question may be like this:
mapping does not: group of answer choices
provide a baseline against which to measure the impact of improvement efforts. define the boundaries of a process. provide a detailed view of all elements external to the process. create a common understanding of the content of a process.which of the pre-columbian sites below is located in south america? palenque tikal tiwanaku teotihuacan
Teotihuacan is the pre-columbian archaeological site located in Central Mexico, in the State of Mexico, that was built around 100 BC. It is widely accepted that Teotihuacan was one of the most influential cities of the ancient Americas and one of the largest cities in the world during its prime.
It is the most visited archaeological site in Mexico and is a UNESCO World Heritage Site. Teotihuacan was the largest city in the pre-Columbian Americas, with an estimated population of 200,000 people at its peak. Palenque, Tikal, and Tiwanaku are all pre-Columbian archaeological sites located in Mesoamerica, Central America, and South America, respectively.
Teotihuacan is located in Central Mexico, about 40 miles (64 km) northeast of modern-day Mexico City. Its layout and architecture have been influenced by several different cultures, including the Maya, Zapotec, and Toltec civilizations. The city is laid out in a grid pattern with broad plazas and avenues connecting the various pyramids, palaces, and temples.
Teotihuacan is famous for its monumental architecture, especially the two large pyramids of the Sun and Moon. It is also renowned for its extensive mural and sculptural artwork, and its archaeological record is one of the most important sources of information about ancient Mesoamerican civilizations.
To learn more about Teotihuacan here:
https://brainly.com/question/1129279#
#SPJ11
the dry air that makes it over the top then wicks the water on the opposite side resulting in a much drier climate on one side of the mountain versus the other. this effect is called
This phenomenon is known as a "rain shadow" effect. A rain shadow occurs when moist air is forced to rise over a mountain, cooling and condensing the moisture, which is then released on the windward side of the mountain.
The air on the leeward side of the mountain is much drier, as it has lost its moisture to the windward side. This effect can be seen in mountainous areas around the world, creating dramatically different climates and environments on either side of the mountain. On the windward side, precipitation is often higher and the air is moister, creating lush vegetation.
On the leeward side, however, the air is dry, creating a more arid climate with little vegetation. The rain shadow effect is caused by the unequal heating of the Earth's surface, which causes air masses to rise, cool, and condense. When this happens, the moisture is carried away from the rising air mass and onto the windward side of the mountain. This creates a much drier environment on the leeward side.
To learn more about rain shadow here:
https://brainly.com/question/1106258#
#SPJ11
what measure do seismologists use to calculate the distance from a seismic receiving station to the epicenter of an earthquake?
Seismologists use the travel time of the P and S waves to calculate the distance from a seismic receiving station to the epicenter of an earthquake.
Seismology is the study of earthquakes and seismic waves that propagate through the Earth. Seismic waves are the waves that travel through the Earth's layers and cause earthquakes. These waves have different velocities, which allows seismologists to identify the Earth's internal layers and characteristics.A seismic wave is a ground-shaking energy that originates from the focus or hypocenter of an earthquake. They propagate through the Earth's layers and can be recorded by seismographs. The three main types of seismic waves are primary waves (P-waves), secondary waves (S-waves), and surface waves (L-waves).
Seismologists use the travel time of the P and S waves to calculate the distance from a seismic receiving station to the epicenter of an earthquake. The P-waves are faster and therefore reach the station first. The S-waves are slower and take a longer time to arrive at the station. The time difference between the arrival of P and S waves is measured and used to calculate the distance from the station to the epicenter of the earthquake. This is done using a travel-time graph, which provides the distance from the station to the epicenter.
To know more about seismologists click on below link :
https://brainly.com/question/676287#
#SPJ11
using maple syrup as an analogy for magma, what do you do to your syrup to decrease its viscosity so that it flows more evenly over your stack of waffles?
To decrease the viscosity of the syrup so that it flows more evenly over the stack of waffles, you should heat it.
Just like magma, which needs to be heated to reduce its viscosity and increase its fluidity, maple syrup also becomes more fluid as it is heated.
What is the meaning of viscosity?
The term viscosity is defined as the internal resistance or friction between the molecules of a fluid that opposes the fluid's movement when a force is applied to it. The viscosity of the fluid is directly proportional to the internal friction of the fluid. The viscosity of a fluid is generally high at low temperatures and low at high temperatures.
Viscosity can be reduced by a variety of methods, the most common of which is heating the fluid.
When heated, the internal friction between the fluid's molecules decreases, making it easier for the fluid to flow. This is analogous to the behavior of magma. When magma is heated, its viscosity decreases, allowing it to flow more readily.
To know more about viscosity, refer here:
https://brainly.com/question/2193315
#SPJ11
which mining process uses heavy equipment to dig holes to remove ores, as well as sand, gravel, and stone? dredging heap leaching open-pit mining strip mining
The strip mining process uses heavy equipment to dig holes to remove ores, as well as sand, gravel, and stone. The correct option is d.
Strip mining is a process that uses heavy equipment to remove ores, sand, gravel, and stone from the earth. It involves digging a large trench and removing the material layer by layer, until the desired material is exposed. The correct option is d.
The material is then hauled away and processed. Strip mining is often used to mine coal and tar sands, and is used when the material is too deep to access by open-pit mining.
To learn more about strip mining here:
https://brainly.com/question/5367423#
#SPJ11
which of the following is a necessary component in the formation of sedimentary rocks? group of answer choices melting of a precursor rock weathering of a precursor rock high viscosity differential stress
The necessary component in the formation of sedimentary rocks is weathering of a precursor rock. Therefore the correct option is option B.
Sedimentary rocks are one of the three main rock categories that make up the Earth's crust. Sedimentary rocks are rocks that are made up of sediment, which is made up of tiny particles of sand, shells, and other materials that settle on the bottom of bodies of water.
The breakdown of rock by physical, chemical, or biological processes is known as weathering. Rocks and soils are damaged by weathering, which makes them smoother, smaller, and easier to transport.
Sedimentary rocks can be created by the weathering of a precursor rock. The resulting sediment is transported to a new location and then cemented and compacted into rock.
Thus, the necessary component in the formation of sedimentary rocks is weathering of a precursor rock. So, the correct option is B. Weathering of a precursor rock.
For such more question on sedimentary:
https://brainly.com/question/31060487
#SPJ11
The following question may be like this:
which of the following is a necessary component in the formation of sedimentary rocks? group of answer choices
melting of a precursor rock weathering of a precursor rock high viscosity differential stressdescribes the tendency for different types of rock to weather at different rates.
The tendency for different types of rock to weather at different rates is known as differential weathering. This phenomenon occurs due to the varying physical and chemical properties of different rocks.
For example, rocks with a greater porosity and permeability are more likely to absorb water, leading to faster weathering.
In contrast, rocks with low porosity and permeability will not absorb water easily and therefore weather more slowly. Other factors that can influence the rate of weathering include the type of minerals that the rock is composed of and the climate in which it is located. Differential weathering affects the landscape, often leading to the formation of distinctive features such as mesas and canyons.
Know more about porosity here
https://brainly.com/question/2593663#
#SPJ11
which is true concerning the blue and magenta colors used to depict airspace on sectional aeronautical charts? group of answer choices faded lines represent airspace which extends to the surface.
The given statement "the blue and magenta colors used to depict airspace on sectional aeronautical charts have faded lines which represent airspace which extends to the surface" is true because a sectional chart is a map utilized in air navigation that portrays the details of an area's airspace.
This map has contour lines and visual terrain characteristics, including obstructions, lakes, and rivers, which provide pilots with the information they need to navigate safely in VFR conditions.
The sectional chart's primary objective is to depict land features that might help a pilot navigate the area. The chart contains many different symbols and markings to indicate obstacles, airports, and other important details that a pilot should be aware of while flying. The colors blue and magenta are used to denote airspace on sectional charts.
Meanwhile, magenta color denotes airspace that stretches from the surface up to 10,000 feet, above sea level. It indicates Class E airspace in which Class G airspace above 14,500 feet MSL is also depicted in magenta. The faded lines within the blue and magenta airspace denote airspace that extends to the surface, as mentioned earlier.
For such more question on aeronautical:
https://brainly.com/question/14371982
#SPJ11
describe the hydrologic cycle, rock cycle, and how the biosphere exchange matter with the other spheres.
The hydrologic cycle is the continuous movement of water from the atmosphere to the land and back to the atmosphere again. Water evaporates from the surface of the Earth and rises into the atmosphere, then condenses and forms clouds, and finally, falls as rain and snow.
The rain and snow then drains back to the surface, either infiltrating into the soil or flowing into rivers, streams, and lakes. The water then evaporates again and the cycle continues. The rock cycle is the continuous process by which sedimentary, igneous, and metamorphic rocks are formed.
Sedimentary rocks are formed when particles of sediment are compressed and cemented together over time. Igneous rocks form when molten material, or magma, cools and crystallizes. Metamorphic rocks form when existing rocks are exposed to extreme temperatures and pressures and transform into new types of rocks.
The biosphere exchange matter with the other spheres through a variety of processes. For example, organisms in the biosphere take in energy from the sun, matter from the lithosphere, and water and carbon dioxide from the atmosphere.
Plants in the biosphere also take in carbon dioxide from the atmosphere and release oxygen as a by-product. All of these exchanges are essential to the survival of organisms and the functioning of the biosphere.
TO KNOW ABOUT rock cycle:
https://brainly.com/question/29767269
#SPJ11
a spinel found in metamorphic rock or an aquamarine found within a pegmatite are examples of what type of deposit
A spinel found in metamorphic rock or an aquamarine found within a pegmatite are examples of hydrothermal deposits.
What are hydrothermal deposits?
Hydrothermal deposits are rocks containing mineral deposits that originated from hot water (hydrothermal) fluids circulating in the Earth's crust.
Hot water deposits often contain significant quantities of minerals, which are usually accompanied by the alteration of the surrounding rock. The hot water that makes up these deposits is generated by heat from the Earth's core, which is transferred through the mantle to the Earth's crust.
When the water is heated, it is driven to the Earth's surface, where it flows through cracks and fissures in the rock.
The water then cools, and minerals precipitate out of the solution, forming hydrothermal deposits. There are various types of hydrothermal deposits, including gold, silver, copper, zinc, and lead deposits, among others.
These deposits are commonly found in areas where tectonic plates meet, and the Earth's crust is being pushed and pulled in various directions.
To know more about Hydrothermal deposits, refer here:
https://brainly.com/question/14308184
#SPJ11
in the picture above, when dr. alley slices his finger through the sand, he is recreating on a smaller scale what type of geologic process?
Dr. Alley is recreating the process of sedimentation on a smaller scale. Sedimentation is the process by which solid particles settle out of a liquid or a gas. The particles settle due to gravity and settle out of the medium into layers.
These layers are then compressed and cemented together to form sedimentary rocks. In the picture, Dr. Alley is slicing his finger through the sand and the particles settle in layers. This process of sedimentation can occur in a variety of geological settings, including in the ocean and on land. Sedimentation can also be caused by erosion, where material is removed from one location and sediment elsewhere. This is also happening in the picture, as the sand is settling in layers from Dr. Alley’s slicing. Sedimentation is an important process in the rock cycle, as it is how sedimentary rocks are formed.
Know more about sedimentation here:
https://brainly.com/question/29768268
#SPJ11
in an area of known past glaciation, and knowing what we have studied so far, hummocky topography most often results from
In an area of known past glaciation, hummocky topography most often results from debris deposited by melting glaciers.
Hummocky topography is a surface feature created when a glacier melts and recedes, leaving behind a series of small hills and valleys. This topography is formed when the glacier pushes rocks, soil, and other debris forward as it moves, creating a bumpy surface. As the glacier melts, the debris is left behind and forms these hummocks and mounds. In areas of known past glaciation, hummocky topography is one of the most common features that remain.
A hummock is a small hillock, knoll, or mound. A hummocky topography is one that contains such little hills and mounds. This condition usually results from ice movements and melting, as it can cause landmasses to rise, shift and reshape. Similarly, the hummocky topography that arises from glacial debris results from the material, including boulders, rocks, gravel, and sand, that was deposited by melting glaciers.
The debris is sorted based on its size, with larger rocks at the top and finer debris at the bottom. The hummocks are formed by the melting of the smaller debris, while the larger rocks are left behind as hillocks. These features are common in regions that were once under glaciers, as the melting and erosion of the ice left behind these deposits.
To know more about Hummocky topography, refer here:
https://brainly.com/question/30317256#
#SPJ11
when going from a 5 to a 6 on the richter scale, what is the increase in amplitude of seismic waves?
a. 1 times
b. 2 times
c. 10 times
d. 32 times
When going from a 5 to a 6 on the Richter scale, the increase in amplitude of seismic waves is 10 times.
This means that a magnitude 6 earthquake produces seismic waves with ten times more amplitude than a magnitude 5 earthquake. The Richter scale is a logarithmic scale, which means that each whole number increase represents a tenfold increase in the amplitude of the seismic waves. For example, a magnitude 7 earthquake produces waves with 100 times more amplitude than a magnitude 5 earthquake, while a magnitude 8 earthquake produces waves with 1,000 times more amplitude than a magnitude 5 earthquake, and so on.
Learn more about seismic waves here: brainly.com/question/13056218
#SPJ4
what type of weather product allows meteorologists to visualize the vertical structure of fronts, clouds, and jetstreams?
The type of weather product that allows meteorologists to visualize the vertical structure of fronts, clouds, and jetstreams is called a Skew-T diagram. Skew-T diagrams are used to identify temperature and wind profiles in the atmosphere, helping meteorologists to make more accurate predictions about upcoming weather conditions. The diagram includes a set of lines that represent the environmental lapse rate, dry adiabatic lapse rate, and the saturation mixing ratio lines.
A Skew-T diagram is a type of graph used in meteorology to display the vertical profile of temperature, dew point, and wind in the atmosphere. It is called a "skew-T" because the temperature axis is skewed or tilted relative to the vertical axis, which allows for a larger temperature range to be displayed on the graph.
Learn more about Climograph: brainly.com/question/14088996
#SPJ11
What are the three ways In which corruption will negatively affect the financial growth of South Africa
Answer:
unemployment, reduction in tax revenue, decline in business operation and ultimately, collapse of the economy
A storage site for high-level radioactive waste would have all of the following features except: isolated from major population centers. geological stability. no contact with groundwater. near volcanic activity where waste can be destroyed by high temperatures. no contact with flowing water or air movement.
A storage site for high-level radioactive waste would have all of the following features except being near volcanic activity where waste can be destroyed by high temperatures. The correct option is option D (near volcanic activity where waste can be destroyed by high temperatures).
A storage site for high-level radioactive waste would have all of the following features except being near volcanic activity where waste can be destroyed by high temperatures. A storage site for high-level radioactive waste would have to have the following features:
• Isolated from major population centers.
• Geological stability.
• No contact with groundwater.
• No contact with flowing water or air movement.
High-level radioactive waste is highly hazardous, and it could cause catastrophic results if it were to be released into the environment. As a result, storage facilities must be built in such a way that they can securely contain high-level radioactive waste. They must be situated away from significant population centers to prevent exposure to large groups of people.
They must also be geologically stable, which means they must be constructed on a site that has not experienced tectonic activity for a long period of time. There should be no contact with groundwater to prevent the release of contaminants into the environment. Finally, there should be no contact with flowing water or air movement. The correct option is option D (near volcanic activity where waste can be destroyed by high temperatures).
For more about radioactive waste:
https://brainly.com/question/30561011
#SPJ11
What is Fiji known for? a. grassland and hurricanes b. landfills c. tropical islands
which two types of ocean circulation changes have had exceptional influence on climate and biodiversity in the past?
The two types of ocean circulation changes that have had exceptional influence on climate and biodiversity in the past are El Niño-Southern Oscillation (ENSO) and Atlantic Meridional Overturning Circulation (AMOC).
El Niño-Southern Oscillation is a complex climate pattern that involves changes to ocean temperatures and atmospheric pressure in the tropical Pacific Ocean. It can lead to drastic changes in precipitation and temperature patterns in different parts of the world.
Atlantic Meridional Overturning Circulation is a large-scale system of ocean currents that transport heat from the tropics to high latitudes, and back again. This circulation is an important component of Earth’s climate system, influencing weather and climate patterns in the North Atlantic region and beyond.
Changes to the AMOC can have serious impacts on regional climate and biodiversity, particularly in Europe and North America. Both ENSO and AMOC have the potential to cause significant changes to the global climate system, with implications for biodiversity and human societies.
Know more about ocean circulation here
https://brainly.com/question/30356957#
#SPJ11
short term changes in atmospheric variables such as temperature, wind, precipitation, and barometric pressure over a given area and period of days are an example of:
The short term changes in atmospheric variables such as temperature, wind, precipitation, and barometric pressure over a given area and period of days is an example of weather patterns.
Weather patterns are the result of large scale movement of air masses and their interaction with other meteorological factors. They determine the type of weather, like sunny days or rainy days, that a given area experiences over a period of days.
Weather patterns are formed when areas of high and low pressure interact. Air moves from areas of high pressure to areas of low pressure, creating an airflow pattern. The temperature, wind, precipitation, and barometric pressure all are affected by this airflow pattern.
Changes in these atmospheric variables depend on the strength of the pressure system and its movement. When the pressure system is strong and stationary, there is little change in the weather pattern. However, when the pressure system is weak and moving, the atmospheric variables will be more volatile.
Learn more about weather patterns here:
https://brainly.com/question/22027718
#SPJ11
caloris basin, a huge circular region on mercury surrounded by rings of mountains, appears to have been produced by
Answer:
Caloris basin, a huge circular region on Mercury surrounded by rings of mountains, appears to have been produced by an impact from a large asteroid or comet. This impact is estimated to have occurred about 3.8 billion years ago and was powerful enough to create a basin nearly 1,550 miles (2,500 km) in diameter. The impact also created a series of concentric rings of mountains around the basin, which rise to heights of over 1 mile (1.5 km) above the surrounding terrain. The Caloris basin is one of the largest and most prominent features on Mercury and provides important clues about the planet's geological history.
basalt is an igneous rock that can be found in which volcanic environment?group of answer choicesmid-ocean ridge volcanismhot spot volcanismsubduction zone volcanism
Basalt is an igneous rock that is most commonly found in volcanoes that form due to subduction zone volcanism.
Subduction zone volcanism is a type of volcanism occurs when one of the Earth's tectonic plates moves beneath another and sinks into the mantle. As the two plates grind against each other, the pressure causes magma to rise up through the lithosphere, forming a volcano.
Basalt is composed of minerals like pyroxene, plagioclase, and olivine, and it forms from the cooling and solidification of lava that is created when the magma rises and erupts. Basalt is one of the most common volcanic rocks and is often used to construct structures such as roads, pathways, and buildings.
For more such questions on Basalt.
https://brainly.com/question/30670942#
#SPJ11
describe what contours on a topographic map represent and how to contour spacing indicates the steepness of a slope.
Contours on a topographic map represent the elevation of a landscape. Contour lines are drawn at regular intervals, and the spacing between each line indicates the steepness of the slope.
Closer-spaced contours indicate a steeper slope, while wider-spaced contours represent a more gradual slope. Contours can also be drawn in different patterns, such as concentric circles, double lines, or parallel lines. This allows for more detail in the elevation of the terrain.
Contours are a useful tool for visualizing the shape of a landscape and allowing for more accurate navigation. It is also a useful tool for determining potential hazards and areas of potential flooding. Contours on a map make it easier to identify natural features such as ravines, cliffs, valleys, and ridges.
Know more about Contours here
https://brainly.com/question/15942208#
#SPJ11
__________ load refers to sand pebbles and boulders that are too heavy to be carried along in suspension.
Bed load refers to sand pebbles and boulders that are too heavy to be carried along in suspension.
Bedload is the name given to the rocks, pebbles, and boulders that are too heavy to be carried along in suspension. They roll or slide along the river's bed or floor due to gravity, and their movements are caused by currents or turbulence.
Bedload can cause erosion by cutting into the bed or floor of the river or stream, and it can also cause sedimentation by depositing itself downstream. Bedload is classified into three categories: the largest, which are boulders, then cobblestones, and finally, the smallest, which are pebbles.
Learn more about bedload at https://brainly.com/question/30896499
#SPJ11
briefly explain why a permanent temperature inversion (temperature increases with height) occurs throughout stratosphere
A permanent temperature inversion, in which temperature increases with height, occurs throughout the stratosphere because of the presence of ozone in the stratosphere.
The absorption of ultraviolet radiation by ozone causes the stratosphere to be heated. Due to the high temperatures of the stratosphere, the temperature increases with increasing altitude.
Additionally, the stratosphere is relatively dry, with little to no water vapor to absorb or emit heat, contributing to the permanent temperature inversion.
A permanent temperature inversion layer in the stratosphere helps to stabilize the atmosphere and prevent vertical mixing between the stratosphere and the troposphere below. This plays an important role in regulating our climate, as it helps to maintain the atmospheric conditions necessary for life on Earth. By preventing mixing, the temperature inversion layer helps to keep the troposphere cooler and drier than the stratosphere, which can have significant impacts on weather patterns and the overall climate system.
To learn more about the "temperature inversion and stratosphere": https://brainly.com/question/28097222
#SPJ11
where is Paris, France located? my 6-month-old-nephew wants to know.
Answer:
western europe
western edge of Europe boarded by the bay of biscay
the richter magnitude of an earthquake is determined from the .group of answer choicesintensity of the earthquakearrival time of p and s wavesarrival time of p and surface wavesduration of the earthquake
The Richter magnitude of an earthquake is determined from the arrival time of P and S waves. Therefore the correct option is option B.
The Richter magnitude scale is a measure of an earthquake's size that assigns a single number to the amount of seismic energy released. Earthquakes are classified according to their magnitude, and the Richter magnitude scale is one of several scales used to do so. The Richter scale was developed by Charles F.
Richter, an American seismologist. The Richter scale, which ranges from 1 to 10, is a logarithmic scale.
Therefore, each whole number increase in magnitude represents a tenfold increase in seismic energy. To summarize, the Richter magnitude of an earthquake is determined from the arrival time of P and S waves.
For such more question on magnitude:
https://brainly.com/question/28671649
#SPJ11
The following question may be like this:
The Richter magnitude of an earthquake is determined from the .group of answer choices
intensity of the earthquakearrival time of p and s wavesarrival time of p and surface wavesduration of the earthquake