Answer:
39.9477amu is the average atomic weight of Argon
Explanation:
The average atomic weight is defined as the sum of the products of the atomic weight of each isotope times its abundance. For the Argon the average atomic weight, X is:
[tex]X = 0.996*^{40}Ar + 0.00337*^{36}Ar+0.00063*^{38}Ar[/tex]
[tex]X = 0.996*39.9624amu + 0.00337*35.9676amu+0.00063*37.9627amu[/tex]
X = 39.9477amu is the average atomic weight of Argon
what causes deep ocean currents to flow
Answer:Deep ocean currents (also known as Thermohaline Circulation) are caused by: ... The sinking and transport of large masses of cool water gives rise to the thermohaline circulation, which is driven by density gradients due to variations in temperature and salinity. The earth's rotation also influences deep ocean currents.
Explanation:
Aqueous hydrochloric acid will react with solid sodium hydroxide to produce aqueous sodium chloride and liquid water . Suppose 14. g of hydrochloric acid is mixed with 6.55 g of sodium hydroxide. Calculate the minimum mass of hydrochloric acid that could be left over by the chemical reaction. Round your answer to significant digits.
Answer:
8.02 g of HCl could be left over by the chemical reaction
Explanation:
We propose the reaction:
HCl(aq) + NaOH (s) → NaCl (aq) + H₂O (l)
Ratio is 1:1. First of all, we determine the moles of reactants:
14 g . 1mol / 36.45g = 0.384 mol of acid
6.55 g. 1mol / 40g = 0.164 mol of base
If a determined mass of HCl, could be left; this means that the acid is the excess reagent.
For 0.164 moles of NaOH, we need 0.164 moles of HCl.
As we have 0.384 moles, (0.384 - 0.164) = 0.220 moles of acid are left over in the reaction. We convert the moles to mass:
0.220 mol . 36.45 g /1mol = 8.02 g
How many significant figures
are in this number?
3 x 10^6
How much energy is required to remove a neutron from the nucleus of an atom of carbon-13?
Answer:
uh i think 12?
Explanation:
Look at the potential energy diagram below. What amount of energy does the products have ?
100
80
PE
50
AB
40
C D
20
Progress of the reaction
40 KJ
60 KJ
O 20 KJ
80 KJ
Answer:
20 kJ
Explanation:
The products are C + D which is on the right side of the diagram. And it says it has 20 kJ of energy.
What are the names of the stable forms of oxygen?
Answer:
18 O, 17 O, and 16 O
Explanation:
three naturally stable isotopes
The stable forms of oxygen are molecular oxygen ([tex]O_{2}[/tex]) and ozone ([tex]O_{3}[/tex]). Molecular oxygen is the most common form in the Earth's atmosphere, while ozone is found in the ozone layer of the atmosphere and has a different molecular structure than [tex]O_{2}[/tex].
The most stable type of oxygen in the Earth's atmosphere is [tex]O_{2}[/tex], sometimes referred to as molecular oxygen or dioxygen. It is made up of two oxygen atoms joined by a link.
Another stable form of oxygen is [tex]O_{3}[/tex], also referred to as ozone. It is a molecule made up of three linked oxygen atoms. The ozone layer in the stratosphere of the Earth contains ozone, which is essential for protecting life on the planet by absorbing damaging ultraviolet (UV) radiation from the Sun.
Learn more about oxygen, here:
https://brainly.com/question/13905823
#SPJ6
Which would be another way to make the ice melt faster
Answer:
d because ur heating the ice and causing friction
Phosphorus is commercially prepared by heating a mixture of calcium phosphate, sand, and coke in an electric furnace. The process involves two reactions. 2 Ca3(PO4)2(s) 6 SiO2(s) 6 CaSiO3(l) P4O10(g) P4O10(g) 10 C(s) P4(g) 10 CO(g) The P4O10 produced in the first reaction reacts with an excess of coke (C) in the second reaction. Determine the theoretical yield of P4 if 293.5 g Ca3(PO4)2 and 378.5 g SiO2 are heated. (No Response) g If the actual yield of P4 is 44.9 g, determine the percent yield of P4.
Answer:
76.6% is percent yield of P₄
Explanation:
Percent yield is defined as 100 times the ratio of actual yield and theoretical yield. To solve this quesiton we need to find the theoretical yield of the reaction. Using:
2Ca₃(PO₄)₂(s) + 6SiO₂(s) → 6CaSiO₃(l) + P₄O₁₀(g)
P₄O₁₀(g) + 10C(s) → P₄(g) + 10CO(g)
We need to find the moles of Ca₃(PO₄)₂ and SiO₂ to find limiting reactant. With limiting reactant we can find moles of P₄O₁₀ = Moles of P₄. We must convert the moles of P₄ to mass using Molar mass (P₄ = 123.895g/mol):
Moles Ca₃(PO₄)₂ -Molar mass: 310.1767g/mol-
293.5g * (1mol / 310.1767g) = 0.9462moles
Moles SiO₂ -Molar mass: 60.08g/mol-:
378.5g * (1mol / 60.08g) = 6.30 moles
For a complete reaction of 6.30 moles of SiO₂ there are required:
6.30 moles SiO₂ * (2 moles Ca₃(PO₄)₂ / 6 moles SiO₂) =
2.10 moles Ca₃(PO₄)₂. As there are just 0.9462 moles, Ca₃(PO₄)₂ is limiting reactant
Moles P₄O₁₀ = Moles P₄:
0.9462moles Ca₃(PO₄)₂ * (1mol P₄O₁₀ / 2 mol Ca₃(PO₄)₂) = 0.4731 moles P₄O₁₀ = Moles P₄.
The mass is:
0.4731 moles P₄ * (123.895g / 1mol) = 58.6g = Theoretical yield.
Percent yield is:
44.9g / 58.6g * 100 =
76.6% is percent yield of P₄Practice Problem Website: https://www3.nd.edu/~smithgrp/structure/workbook.html
1. Click on Do the problems
2. Click on the number for the practice problem to be completed
3. Click on IR
Example of problem 1 from the website:
Formula: C3H5BrO2
IR Peaks:
1717 nm—Strong peak indicates a carbonyl group C=O
2571-2670 nm- medium peak indicates sp3 hybrid C-H.
3067 nm --- Broad medium peak indicates OH group, specifically in a carboxylic acid (Would not be a carboxylic acid without the carbonyl peak as well)
Complete the following problems: 3, 5, 7, 8, 12, 13, 27, 32, 38, and 40.
Be as accurate as possible. I am looking for the frequency and molecular formula to make sense with the functional group you think is represented.
How many atoms are in 34 g of Cu?
Answer:
Babygirl these are double DD'S
Explanation:
OooOOO I'm hurt oh my neck my neck and my back
Select all of the Earth Systems that contain carbon.
Oa Atmosphere
Ob Geosphere
Oc Biosphere
Od Hydrosphere
Answer:
a, c, d
Explanation:
biosphere atmosphere hydrosphere lithosphere
What are metalloids?
A metalloid is a type of chemical element which has a preponderance of properties in between, or that are a mixture of, those of metals and nonmetals.
Answer:
Metalloid, in chemistry, an imprecise term used to describe a chemical element that forms a simple substance having properties intermediate between those of a typical metal and a typical nonmetal. There is no single property which can be used to unambiguously identify an element as a metalloid.
When you need to produce a variety of diluted solutions of a solute, you can dilute a series of stock solutions. A stock solution has a significantly higher concentration of the given solute (typically 101 to 104 times higher than those of the diluted solutions). The high concentration allows many diluted solutions to be prepared using minimal amounts of the stock solution. What volume of a 6.57 M stock solution do you need to prepare 500. mL of a 0.0490 M solution of HCl
Answer:
3.73 mL
Explanation:
To solve this problem we can use the equation C₁V₁=C₂V₂, where:
C₁ = 6.57 MV₁ = ?C₂ = 0.0490 MV₂ = 500 mLWe input the data:
6.57 M * V₁ = 0.0490 M * 500 mLAnd solve for V₁:
V₁ = 3.73 mLSo 3.73 mL of a 6.57 M stock solution would be required to prepare 500 mL of a 0.0490 M solution.
Rotation about C-C single bonds allows a compound to adopt a variety of _____________. conformations configurations formations isomers projections are often used to draw the various conformations of a compound. conformations are lower in energy, while conformations are higher in energy. The difference in energy between staggered and eclipsed conformations of ethane is referred to as strain. strain occurs in cycloalkanes when bond angles deviate from the preferred °. The conformation of cyclohexane has no torsional strain and very little angle strain. The term "ring flip" is used to describe the conversion of one conformation into the other. When a ring has one substituent the equilibrium will favor the chair conformation with the substituent in the position.
Answer:
Conformation
Explanation:
Conformation refers to "any of the spatial arrangements which the atoms in a molecule may adopt and freely convert between, especially by rotation about individual single bonds"(Oxford dictionary).
Carbon-Carbon single bonds are known to undergo rotations about its axis. These rotations leads to various conformations. The energy difference between conformations may be low or high depending on the structure of the molecule. The difference in energy between conformations determines a molecules's preferred conformation.
How does the average reaction rate differ from an instantaneous reaction rate?
a) The average reaction rate is how quickly the reaction proceeds at a specific time. An instantaneous reaction rate is how quickly the reaction proceeds over time.
b) The average reaction rate is how quickly the reaction proceeds over time considering the reactants. An instantaneous reaction rate is how quickly the reaction proceeds at a specific time considering the products.
c) The average reaction rate is how quickly the reaction proceeds over time. An instantaneous reaction rate is how quickly the reaction proceeds at a specific time.
d) The average reaction rate is how quickly the reaction proceeds over time. An instantaneous reaction rate is how quickly the reaction proceeds compared to another reaction.
Answer:
The average reaction rate is how quickly the reaction proceeds at a specific time. An instantaneous reaction rate is how quickly the reaction proceeds over time.
Explanation:
4 points 15. The diagram below shows the relative positions of Earth, the moon, and the sun. The moon is shown at four possible positions around Earth. 3 Sunlight Sun Earth mo Which position of the moon could result in a lunar eclipse? В. 2 A B
Answer:
b c
Explanation:
Answer: b c
Explanation: i did test
Some hypothetical alloy is composed of 25 wt% of metal A and 75 wt% of metal B. If the densities of metals A and B are 6.17 and 8.00 g/cm3 , respectively, and their respective atomic weights are 171.3 and 162.0 g/mol, determine whether the crystal structure for this alloy is simple cubic, facecentered cubic, or body-centered cubic. Assume a unit cell edge length of 0.332 nm
Answer:
Simple cubic
Explanation:
The density of metal A (ρa) = 6.17 g/cm³, The density of metal B (ρb) = 8 g/cm³, The atomic weight of metal A (Aa) = 171.3 g/mol, The atomic weight of metal B (Ab) = 162 g/mol, the unit cell edge length (a) = 0.332 nm, concentration of metal A (Ca) = 25%, concentration of metal B (Cb) = 75%
The average density is given by:
[tex]\rho_{ave}=\frac{100}{\frac{C_a}{\rho_a} +\frac{C_b}{\rho_b} } \\\\\rho_{ave}=\frac{100}{\frac{25}{6.17} +\frac{75}{8} } =7.45\ g/cm^3\\\\The\ average\ atomic\ weight\ is:\\\\A_{ave}=\frac{100}{\frac{C_a}{A_a} +\frac{C_b}{A_b} } \\\\A_{ave}=\frac{100}{\frac{25}{171.3} +\frac{75}{162} } =164.23\ g/mol\\\\The\ number\ of\ atoms\ per\ unit(n)\ is:\\\\n=\frac{\rho_{ave}*a^3*N_A}{A_{ave}} \\\\N_A=Avogadro\ constant=6.02*10^{22} \ mol^{-1},a=0.332\ nm=3.32*10^{-8}cm\\\\Substituting:\\\\[/tex]
[tex]n=\frac{\rho_{ave}*a^3*N_A}{A_{ave}} =\frac{7.45*(3.32*10^{-8})^3*6.02*10^{23}}{164.23} \\\\n=0.999\\[/tex]
n≅1
Since n≅1, the crystal structure for this alloy is simple cubic
Nitric acid decomposes in light to form nitrogen dioxide, water, and oxygen, according to the following chemical equation.
4HNO3 (l â 4NO2(g) + 2H2O (l) + O2(g)
If 2.5 g nitric acid decomposes, what is the total volume of gas produced?
a. 0.050L
b. 0.22
c.0.89
d. 1.1L
Answer:
b. 0.22 L
Explanation:
Step 1: Write the balanced equation
4 HNO₃(l) ⇒ 4 NO₂(g) + 2 H₂O(l) + O₂(g)
Step 2: Calculate the moles corresponding to 2.5 g of HNO₃
The molar mass of HNO₃ is 63.01 g/mol.
2.5 g × 1 mol/63.01 g = 0.040 mol
Step 3: Calculate the moles of O₂ produced from 0.040 moles of HNO₃
The molar ratio of HNO₃ to O₂ is 4:1. The moles of O₂ produced are 1/4 × 0.040 mol = 0.010 mol.
Step 4: Calculate the volume corresponding to 0.010 moles of O₂
Assuming the reaction takes place at standard temperature and pressure, the volume of 1 mole of O₂ is 22.4 L.
0.010 mol × 22.4L/1 mol = 0.22 L
QUICK !!! How many moles are in 3.78 x 1025 molecules of CO?
Answer: 63
Explanation: (3.78/6.022)*100
A student burned her magnesium sample according to the procedure and obtained a light gray product. Since the crucible looked dirty anyway, she skipped the steps to convert the Mg3N2 contamination to MgO, weighed the gray sample, and calculated the mass of her product. Was her resulting mass likely to be higher or lower the expected
Answer:
The resulting mass will be higher than expected
Explanation:
We have to keep this in mind; When magnesium is being burnt in air, two reactions are taking place. The first one is;
2Mg(s) + O2(g) ------> MgO(s) -------1
And
3Mg(s) + N2(g) -------> Mg3N2(s) ---------2
Now, if the steps that should be taken to convert Mg3N2 to MgO are not taken, the reaction is much quicker but a higher mass of solid is obtained than what was expected.
This higher mass of solid obtained owes to the fact that Mg3N2 from reaction 2 was not converted to MgO leading to contamination of the product.
Consider the proposed structure of carbon dioxide. Determine whether the structure is correct and justify your decision. Select one: This structure is correct due to the total number of bonds and electrons. This structure is correct due to allowed exceptions to the octet rule for the involved atoms. This structure is incorrect due to the total number of electrons for the involved atoms. This structure is incorrect because the octet rule is not fulfilled for all the atoms.
The question is incomplete, the complete question is found in the image attached to this answer
Answer:
This structure is correct due to the total number of bonds and electrons.
Explanation:
We know that all atoms in a compound are expected to obey the octet rule and we use this rule to ascertain the correctness of any chemical structure.
The structure of carbon IV oxide drawn perfectly satisfies the octet rule for each atom. Each atom in the molecule has eight electrons around its valence shell.
Therefore,since CO2 has sixteen valence electrons, we can conclude that; this structure is correct due to the total number of bonds and electrons.
What is the percent enantiomeric excess (ee) of a mixture that has 86% of one enantiomer and 14% of the other
Answer:
86% - 14% = 72%
Explanation:
Which statement is true about the speed of light? (2 points)
Light travels relatively slowly.
Distance in space is measured using the speed of light.
Time in space is measured using the speed of light.
The speed of light is unknown
Answer:
2nd option is the correct answer of this question
Answer:
yes it is b
Explanation:
Can someone help me with this? And provide an explanation on how they found their answer? Using conversion factors. I'm confused :(
You have used 3.0×102 L of distilled water for a dialysis patient. How many gallons of water is that?
Answer:
This would be 63 gallons :)
Explanation:
The Volume of water = 2.4 × 10² L
The Volume of water in gal = ?
The solution: We know that one gal is equal to 3.785 litter.
So in conclusion, 2.4 × 10²L × 1 gal / 3.785 L
2.4 × 10²L × 0.264 gal. L⁻¹
0.634 × 10² gal
Hopefully this helps :3
63 gal
In order to be in a position to manipulate any operation, one has to know all the fine details of the system and where and how one might apply subtle changes to affect the outcome. When looking at chemical reactions, it is from the study of its kinetics that one gleams the insight necessary to be able to do this. The main use of chemical kinetics is to measure the speed of a chemical reaction. But more importantly, in measuring the speed of a reaction, one gains insight as to what part of the reaction imparts this speed (or lack thereof) and thus allows one to propose a specific mechanism that details the critical pathway for the reaction. Measuring the speed of a chemical reaction is very similar to measuring speed in general, except that instead of talking in terms of distance traveled per unit time we are measuring either reactants consumed per unit time or products produced per unit time. There are many factors that affect the speed of a chemical reaction, some of the more common ones being:
Answer:
See explanation
Explanation:
Chemical kinetics, the branch of physical chemistry that is concerned with understanding how fast or how slow chemical reactions occur (Encyclopedia Britannica).
The study of the kinetics of a chemical reaction is helpful in many ways. Most important is the fact that it allows one to propose a specific mechanism that details the critical pathway for the reaction.
The factors that affect the rate of chemical reaction includes; concentration of reactants, temperature, nature of reactants , the solvent used, the presence of a catalyst, presence of light, surface area of reactants and pressure for gaseous reactants.
how many molecules of sugar are in 4.67 miles of sugar?
54.1miles/gallons how many liters of gas will be consumed traveling 132 km
Answer:
5.75 L.
Explanation:
From the question given above, the following data were obtained:
Rate = 54.1 miles/gallons
Distance = 132 km
Volume (in L) consumed =?
Next, we shall convert 132 km to mile. This can be obtained as follow:
1 km = 0.621 mile
Therefore,
132 km = 132 km × 0.621 mile / 1 km
132 km = 81.972 mile
Next, we shall determine the volume (in gallons) of the gas needed. This can be obtained as follow:
Rate = 54.1 miles/gallons
Distance = 81.972 mile
Volume (in gallon) =?
Rate = Distance / volume
54.1 = 81.972 / volume
Cross multiply
54.1 × volume = 81.972
Divide both side by 54.1
Volume = 81.972 / 54.1
Volume = 1.52 gallon.
Finally, we shall convert 1.52 gallon to litre (L). This can be obtained as follow:
1 gallon = 3.785 L
Therefore,
1.52 gallon = 1.52 gallon × 3.785 L / 1 gallon
1.52 gallon = 5.75 L
Therefore, 5.75 L of the gas will be consumed.
Based on your understanding of color's relationship to wavelength, identify the approximate wavelength of light (nm) emitted by strontium when it was burned in Part C. (No quantitative data was collected for this; you are giving an approximate value only, based on what you observed.) Explain your reasoning in full, making sure to cite specific data and observations to support your answer.
Answer:
The flame colour of strontium is red. Red has a wavelength of around 620 to 750 nm.
Explanation:
Visible light is part of the electromagnetic spectrum. The electromagnetic waves are composed of electric and magnetic fields.
The visible spectrum is composed of seven different wavelengths that corresponds to different colours. When a metallic element is exposed flame, one of these colours is observed. This is commonly called the flame test.
The flame colour of strontium is red. Red has a wavelength of around 620 to 750 nm.
The approximate wavelength of light (nm) emitted by strontium when it was burned is red, where red has a wavelength of round 620-750 nm.
Wavelength of light emitted by strontiumGenerally, Visible mild is phase of the electromagnetic spectrum. the electromagnetic waves are composed of electric powered and magnetic fields. When a metal factor is uncovered flame, one of they seven colors of visible spectrum is seen.
The flame shade of strontium is red, where red has a wavelength of round 620-750 nm.
For more information on Wave
https://brainly.com/question/3004869
............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Answer:
Thank you for the free points!!
Explanation:
Which mission is not going to explore outside of the solar system?
A. SAFIR
B. Europa Clipper
C. MIRI
D. Kepler