Arrange the following 0.10 M solutions in order of increasing acidity. You may need the following Ka and Kb values: Acid or base Ka KbCH3COOH 1.8 x 10^-5 HF 6.8 x 10^-4 NH3 1.8 x 10^-5 RRank from highest to lowest pH. To rank items as equivalent, overlap them.

Answer:I apologize, but the reaction you provided is incomplete. Please provide the complete reaction so I can assist you better.

learn more about na2cr2

https://brainly.com/question/12957919?referrer=searchResults

#SPJ11

The number of moles are 0.003699 moles.
The molecular weight of the acid HA is about 184.37 g/mol.

Let's break it down into parts (a) and (b).

(a) To calculate the number of moles of acid in the original sample, first find the moles of NaOH used in the titration:

moles of NaOH = volume of NaOH (L) × molarity of NaOH (moles/L)
moles of NaOH = 0.0274 L × 0.135 moles/L = 0.003699 moles

Since it's a monoprotic acid, the mole ratio of HA to NaOH is 1:1, meaning the moles of acid, HA, are equal to the moles of NaOH:

moles of HA = 0.003699 moles

(b) To calculate the molecular weight of the acid HA, use the formula:

Molecular weight = mass of sample (g) / moles of HA

Molecular weight = 0.682 g / 0.003699 moles ≈ 184.37 g/mol

So, the molecular weight of the acid HA is approximately 184.37 g/mol.

To learn more about mass, refer below:

https://brainly.com/question/19694949

#SPJ11

Yes, the data suggests natural selection in stickleback fish, as the chart shows a decrease in full armor frequency.

The stickleback fish is well known for its adaptability and is often studied in the context of natural selection. In this case, if the original population trapped in the lake thousands of years ago had full armor, it suggests that they were better equipped to defend against predators.

However, over time, environmental conditions might have changed, leading to different selection pressures. The chart indicates a decrease in the frequency of stickleback fish with full armor, which implies that individuals with reduced or no armor had a higher survival or reproductive advantage.

This change in the population's armor characteristics suggests that natural selection has occurred. Individuals with reduced armor were likely more successful in their environment, allowing their traits to become more prevalent over generations.

To learn more about  stickleback fish click here

brainly.com/question/30513832

#SPJ11

According to the statement the partial pressure of Ne is 7.23 atm and the partial pressure of Ar is 0.007 atm in the container.

To solve this problem, we first need to use the ideal gas law equation: PV = nRT. We know the volume of the container (V = 1.65 L), the temperature (T = 300 K), and the total mass of the gas mixture (20.0 g = 0.02 kg). We can calculate the total moles of gas using the molar mass of each gas (Ne: 20.18 g/mol, Ar: 39.95 g/mol):
n = (10.0 g Ne / 20.18 g/mol Ne) + (10.0 g Ar / 39.95 g/mol Ar)
n = 0.497 mol
Next, we need to calculate the partial pressure of each gas. We can use Dalton's law of partial pressures, which states that the total pressure of a gas mixture is the sum of the partial pressures of each gas. The partial pressure of each gas is equal to the mole fraction of that gas (x) times the total pressure (P):
P_Ne = x_Ne * P_total
P_Ar = x_Ar * P_total
To find the mole fraction of each gas, we divide the number of moles of that gas by the total number of moles:
x_Ne = n_Ne / n_total = (10.0 g Ne / 20.18 g/mol Ne) / 0.497 mol = 0.999
x_Ar = n_Ar / n_total = (10.0 g Ar / 39.95 g/mol Ar) / 0.497 mol = 0.001
Finally, we can calculate the partial pressures:
P_Ne = 0.999 * P_total
P_Ar = 0.001 * P_total
We know that the total pressure is equal to the pressure of the gas mixture in the container. We can rearrange the ideal gas law equation to solve for the pressure (P):
P = nRT / V
P = (0.497 mol) * (0.0821 L atm/mol K) * (300 K) / (1.65 L)
P = 7.24 atm
Therefore, the partial pressure of Ne is:
P_Ne = 0.999 * 7.24 atm = 7.23 atm
And the partial pressure of Ar is:
P_Ar = 0.001 * 7.24 atm = 0.007 atm
In conclusion, the partial pressure of Ne is 7.23 atm and the partial pressure of Ar is 0.007 atm in the container.

To know more about gas mixture visit :

https://brainly.com/question/16118479

#SPJ11

The types of isomers for [[tex]Pt(en)Cl_2[/tex]] are:

cis isomer

trans isomer

[[tex]Pt(en)Cl_2[/tex]] refers to a complex ion of platinum(II) with ethylenediamine (en) and two chloride ions ([tex]Cl^-[/tex]). The complex has two possible isomers based on the relative orientation of the ligands around the central metal ion.

The two isomers are:

cis-[[tex]Pt(en)Cl_2[/tex]]: In this isomer, the two ethylenediamine ligands are adjacent to each other, and the two chloride ligands are opposite to each other.

trans-[[tex]Pt(en)Cl_2[/tex]]: In this isomer, the two ethylenediamine ligands are opposite to each other, and the two chloride ligands are adjacent to each other.

Both of these isomers are examples of geometrical isomers. They are not optical isomers since they are not mirror images of each other. They are also not fac or mer isomers since those terms are used to describe coordination compounds with more than two ligands.

For more question on isomers click on

https://brainly.com/question/26298707

#SPJ11

To determine the number of moles of Fe2+ in a 2.0g sample that is 80% by mass of FeCl2, we need to consider the molar mass of FeCl2 and the mass of Fe2+ in the sample.

The molar mass of FeCl2 can be calculated by adding the atomic masses of iron (Fe) and two chlorine (Cl) atoms. The atomic mass of iron is 55.845 g/mol, and the atomic mass of chlorine is 35.453 g/mol.

Molar mass of FeCl2 = (1 × atomic mass of Fe) + (2 × atomic mass of Cl) = 55.845 g/mol + (2 × 35.453 g/mol)

Next, we need to determine the mass of Fe2+ in the 2.0g sample. Since the sample is 80% by mass of FeCl2, the mass of FeCl2 in the sample can be calculated as:

Mass of FeCl2 = 80% × 2.0g = 0.8 × 2.0g

To find the mass of Fe2+ in the sample, we need to multiply the mass of FeCl2 by the ratio of the atomic masse:

Mass of Fe2+ = Mass of FeCl2 × (Molar mass of Fe2+ / Molar mass of FeCl2)

Finally, we can convert the mass of Fe2+ to moles using its molar mass:

Moles of Fe2+ = Mass of Fe2+ / Molar mass of Fe2+

Performing the calculations will give us the number of moles of Fe2+ in the given sample.

To learn more about atomic masse click here

brainly.com/question/29117302

#SPJ11

The ionic equations for the given chemical reactions are as follows:

2HCl(aq) + Fe(s) → FeCl2(aq) + H2(g)

HNO3(aq) + NaOH(aq) → NaNO3(aq) + H2O(l)

HCl(aq) + KOH(aq) → KCl(aq) + H2O(l)

H2SO4(aq) + Mg(OH)2(aq) → MgSO4(aq) + 2H2O(l)

The reaction between hydrochloric acid (HCl) and iron (Fe) yields iron(II) chloride (FeCl2) and hydrogen gas (H2). In the ionic equation, HCl dissociates into H+ and Cl- ions, and Fe(s) becomes Fe2+ ions. Therefore, the balanced ionic equation is 2H+(aq) + 2Cl-(aq) + Fe(s) → Fe2+(aq) + 2Cl-(aq) + H2(g).

When nitric acid (HNO3) reacts with sodium hydroxide (NaOH), sodium nitrate (NaNO3) and water (H2O) are formed. The ionic equation shows that HNO3 dissociates into H+ and NO3- ions, and NaOH dissociates into Na+ and OH- ions. Thus, the balanced ionic equation is H+(aq) + NO3-(aq) + Na+(aq) + OH-(aq) → Na+(aq) + NO3-(aq) + H2O(l).

The reaction between hydrochloric acid (HCl) and potassium hydroxide (KOH) produces potassium chloride (KCl) and water (H2O). In the ionic equation, HCl dissociates into H+ and Cl- ions, and KOH dissociates into K+ and OH- ions. Hence, the balanced ionic equation is H+(aq) + Cl-(aq) + K+(aq) + OH-(aq) → K+(aq) + Cl-(aq) + H2O(l).

When sulfuric acid (H2SO4) reacts with magnesium hydroxide (Mg(OH)2), magnesium sulfate (MgSO4) and water (H2O) are produced. The ionic equation shows that H2SO4 dissociates into 2H+ and SO4^2- ions, and Mg(OH)2 dissociates into Mg^2+ and 2OH- ions. Thus, the balanced ionic equation is 2H+(aq) + SO4^2-(aq) + Mg^2+(aq) + 2OH-(aq) → Mg^2+(aq) + SO4^2-(aq) + 2H2O(l).

To learn more about HCl click here, brainly.com/question/30233723

#SPJ11

Answer:Here are the steps in the correct order for performing an ELISA:

1. Coat the wells of a microplate with capture antibodies specific to the analyte of interest.

2. Block any remaining surface on the wells with a non-reactive protein (such as BSA) to prevent non-specific binding of other proteins.

3. Add the sample (containing the analyte) to the wells and incubate to allow the capture antibodies to bind to the analyte.

4. Wash the wells to remove any unbound proteins and substances.

5. Add detection antibodies specific to the analyte, which are conjugated to an enzyme such as horseradish peroxidase (HRP).

6. Incubate the wells to allow the detection antibodies to bind to the analyte.

7. Wash the wells to remove any unbound detection antibodies.

8. Add a substrate for the enzyme, which will cause a color change when the enzyme reacts with it.

9. Measure the color change (either visually or with a spectrophotometer) to determine the amount of analyte in the sample, which is proportional to the amount of color change.

Overall, ELISA is a highly sensitive and specific technique that is widely used in research, clinical diagnosis, and other fields to detect and quantify a variety of proteins and other biomolecules.

learn more about ELISA

https://brainly.com/question/28257271?referrer=searchResults

#SPJ11

When we say STP, we are referring to standard temperature and pressure, which is defined as 0°C (273 K) and 1 atm (101.3 kPa).

The fact that a 32 g sample of gas occupies 22.4 L at STP means that the gas has a molar volume of 22.4 L/mol.

We can use the ideal gas law to find the number of moles of gas present in the sample. The ideal gas law is PV=nRT, where P is the pressure,

V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. At STP, we know that the pressure is 1 atm and the temperature is 273 K.

Rearranging the ideal gas law, we get n = PV/RT. Substituting the given values, we get n = (1 atm)(22.4 L) / (0.08206 L·atm/mol·K)(273 K) = 1 mol.

So we have 1 mole of gas in the sample, which weighs 32 g. The molar mass of the gas can be found by dividing the mass by the number of moles: molar mass = 32 g / 1 mol = 32 g/mol.

Now, we can use the periodic table to find the identity of the gas that has a molar mass of 32 g/mol. The closest match is O2, which has a molar mass of 32 g/mol. Therefore, the gas in the sample is most likely oxygen.

In summary, a 32 g sample of gas that occupies 22.4 L at STP is most likely oxygen, based on the ideal gas law and the molar mass of the gas.

To know more about temperature refer here

https://brainly.com/question/11464844#

#SPJ11

The final pressure of the nitrogen gas is 2.00 atm when heated from 250 K to 500 K at constant volume.

The ideal gas law states that PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature in Kelvin. Since the volume is constant, we can rearrange the equation to solve for pressure:

P = nRT/V

The number of moles of gas (n) and the gas constant (R) are constant, so we can simplify the equation further:

P ∝ T

This means that pressure is directly proportional to temperature, assuming the volume and number of moles of gas remain constant. Therefore, we can use the following equation to solve for the final pressure:

P₂ = P₁(T₂/T₁)

where P₁ and T₁ are the initial pressure and temperature, respectively, and P₂ and T₂ are the final pressure and temperature, respectively.

Substituting the given values, we get:

P₂ = 1.00 atm × (500 K / 250 K) = 2.00 atm

For more question on pressure visit:

https://brainly.com/question/24719118

#SPJ11

The equilibrium constant for this reaction at 297.0 K is approximately 2.98 x 10^6.

For the reaction 3Fe2O3(s) + H2(g) = 2Fe3O4(s) + H2O(g), we can determine the equilibrium constant at 297.0 K using the given values for the enthalpy change (H°) and the entropy change (S°). We can use the Gibbs free energy equation to find the equilibrium constant:
ΔG° = ΔH° - TΔS°
where ΔG° is the Gibbs free energy change, ΔH° is the enthalpy change, T is the temperature in Kelvin, and ΔS° is the entropy change. At equilibrium, ΔG° = 0, so we can solve for the equilibrium constant (K) using:
0 = ΔH° - TΔS°
ΔH° = TΔS°
K = e^(-ΔG°/RT)
Using the given values, ΔH° = -6.0 kJ = -6000 J and ΔS° = 88.7 J/K. The temperature is given as 297.0 K. We can now calculate ΔG°:
ΔG° = -6000 J - (297.0 K)(88.7 J/K) = -6000 J - 26335.9 J = -32335.9 J
Now, we can find the equilibrium constant K using the equation K = e^(-ΔG°/RT), where R is the ideal gas constant (8.314 J/mol K):
K = e^(-(-32335.9 J)/[(8.314 J/mol K)(297.0 K)]) = e^(32335.9 J / 2467.938 J) ≈ 2.98 x 10^6
Thus, the equilibrium constant for this reaction at 297.0 K is approximately 2.98 x 10^6.

To know more about Equilibrium constant visit:

https://brainly.com/question/10038290

#SPJ11

The xanthoproteic test is a chemical test used to detect the presence of aromatic amino acids, particularly tyrosine, in proteins.

Here is a possible mechanism for the reactions involved in the xanthoproteic test with a tyrosine residue:

Step 1: Nitration

Concentrated nitric acid (HNO3) reacts with the phenolic group of tyrosine to form a nitrated intermediate.

Tyrosine + HNO3 → Nitrotyrosine

Step 2: Nitrotyrosine Formation

When the nitrated intermediate is treated with sodium hydroxide (NaOH), it undergoes a rearrangement reaction, forming a yellow-orange compound called nitrotyrosine.

Nitrotyrosine intermediate + NaOH → Nitrotyrosine

Step 3: Xanthoproteic Reaction

When the nitrotyrosine compound is further treated with concentrated hydrochloric acid (HCl),

it undergoes a dehydration reaction to form a more stable compound that absorbs visible light and gives a characteristic yellow color. This compound is called xanthoproteic acid.

Nitrotyrosine + HCl → Xanthoproteic acid

Overall Reaction:

Tyrosine + HNO3 + NaOH + HCl → Xanthoproteic acid

The xanthoproteic test can be used to confirm the presence of a tyrosine residue in a protein.

To know more about xanthoproteic test refer here

https://brainly.com/question/9612581#

#SPJ11

The first step is the slow step, and the second step is the fast step. This mechanism is a classic example of a catalytic cycle. Here are the answers to each statement:

a. OI− is not a catalyst; it is consumed in the first step and regenerated in the second step. Therefore, statement a is false.

b. I− is an intermediate because it appears in the first step and is consumed in the second step, but it does not appear in the overall reaction equation. Therefore, statement b is true.

c. O2 is a product of the reaction and is not an intermediate. Therefore, statement c is false.

d. The rate law of the reaction is determined by the slow step, which is the first step. The rate law can be written as rate = k[H2O2][OI−]. Therefore, statement d is true.

In summary, the correct statements are b and d.

To know more about refer catalytic cycle here

brainly.com/question/27539774#

#SPJ11

The equilibrium partial pressure of CO would decrease, while the equilibrium partial pressure of CO2 would increase.

According to the given reaction and equilibrium constant, at 1000 K with Kp= 19.9, the reaction Fe2O3 + 3CO = 2Fe + 3CO2 tends to favor the formation of products. Since CO is the only gas initially present, it will react with Fe2O3 to produce Fe and CO2. As the reaction progresses towards equilibrium, the partial pressure of CO would decrease, while the partial pressure of CO2 would increase.

The specific values of the equilibrium partial pressures cannot be determined without additional information, such as the initial and final amounts of the reactants and products or the total pressure of the system. However, based on the given information, we can infer that the equilibrium partial pressure of CO would be lower than the initial partial pressure of 0.872 atm, and the equilibrium partial pressure of CO2 would be higher than zero.

To learn more about  equilibrium partial pressure click here

brainly.com/question/28874596

#SPJ11

Complete Question

What are the equilibrium partial pressures of CO and CO2 if CO is the only gas present initially, at a partial pressure of 0.874 atm?

At 1000 K, Kp= 19.9 for the reaction Fe2O3 + 3CO = 2Fe + 3 CO2

The balanced chemical equation for the reaction is:2 NH4I(aq) + Hg2(NO3)2(aq) → Hg2I2(s) + 2 NH4NO3(aq)  the correct answer is option (a).

To obtain the net ionic equation, we need to identify the species that are aqueous and are strong electrolytes, and exclude any spectator ions (ions that appear on both sides of the equation and do not participate in the reaction). In this case, all the ions are aqueous and strong electrolytes,Electrolytes are substances that, when dissolved in water or melted, produce ions that can conduct electricity. In aqueous solutions, electrolytes can be classified into two main types:Strong electrolytes: These are substances that completely dissociate into ions when dissolved in water, producing a high concentration of ions and allowing for good electrical conductivity. Examples of strong electrolytes include soluble ionic compounds (such as NaCl, KNO3, CaCl2) and strong acids/bases (such as HCl, HNO3, NaOH).Weak electrolytes: These are substances that only partially dissociate into ions when dissolved.

To know more about electrolytes visit :

https://brainly.com/question/29771118

#SPJ11

Calcium chloride reacts with the fatty acid salt to form a calcium soap (Ca(RCOO)2) precipitate and the corresponding metal chloride (M+Cl-).

When CaCl2 (calcium chloride) reacts with a soap, which is typically a sodium or potassium salt of a fatty acid, the reaction results in the formation of a precipitate called calcium soap.

Let's represent the fatty acid salt as RCOO- M+ (where R is the hydrocarbon chain, M+ is the metal cation like Na+ or K+).

The balanced equation for this reaction is:

CaCl2 (aq) + 2 RCOO- M+ (aq) → Ca(RCOO)2 (s) + 2 M+Cl- (aq)

In this equation, calcium chloride reacts with the fatty acid salt to form a calcium soap (Ca(RCOO)2) precipitate and the corresponding metal chloride (M+Cl-).

To learn more about equation, refer below:

https://brainly.com/question/29657983

#SPJ11

In the electron transport chain, Complex III receives electrons from ubiquinol and transfers them to cytochrome c.

Complex III in the electron transport chain accepts electrons from ubiquinol and transfers them to cytochrome c. Ubiquinol is a reduced form of coenzyme Q10 (ubiquinone), which is a lipid-soluble molecule that shuttles electrons between complex I or II and complex III in the inner mitochondrial membrane. The electrons are then transferred to cytochrome c, a small heme protein that is mobile in the intermembrane space of the mitochondria. Cytochrome c then delivers the electrons to complex IV, which ultimately transfers the electrons to molecular oxygen (O2) to form water (H2O) as the final product. This process generates a proton gradient across the inner mitochondrial membrane, which is used to synthesize ATP through the activity of ATP synthase. Overall, the electron transport chain is essential for oxidative phosphorylation and ATP production in cells.

Know more about Electron Transport Chain here:

https://brainly.com/question/24372542

#SPJ11

To synthesize esters efficiently, you can use the Fischer esterification reaction. It involves the reaction of a carboxylic acid with an alcohol in the presence of an acid catalyst, usually concentrated sulfuric acid.

The equilibrium can be shifted in favor of ester formation by using an excess of alcohol or removing the water produced during the reaction. Making esters involves a chemical reaction between a carboxylic acid and an alcohol, which can be catalyzed by an acid catalyst. However, there are many different methods and conditions that can be used to make esters depending on the specific carboxylic acid and alcohol involved. The reaction proceeds with the formation of an ester and water as the byproducts.

To know more about esterification visit :-

https://brainly.com/question/16251521

#SPJ11

Hybrid bonding orbitals on central oxygen in H2O derived from 2s2s and 2p2p atomic orbitals with bond angle of 116.8°.

To construct normalized hybrid bonding orbitals on the central oxygen in H2O, we need to combine the 2s and 2p atomic orbitals.

The two 2s orbitals will combine to form a new hybrid orbital, which will be called the 2sp hybrid orbital.

Similarly, the two 2p orbitals will combine to form two new hybrid orbitals, which will be called the 2p-sp2 hybrid orbitals.

These hybrid orbitals will have different energy levels and shapes than the original atomic orbitals.

The bond angle of H2O is 104.5°, but the bond angle of Ozone is 116.8° due to the different hybridization of the central oxygen atom.

For more such questions on Hybrid, click on:

https://brainly.com/question/27956623

#SPJ11

Normalized hybrid bonding orbitals on the central oxygen in H2O are derived from 2s and 2p atomic orbitals.

The bond angle of water is approximately 104.5° due to sp3 hybridization. However, for O3, which has a bond angle of 116.8°, the hybridization involves both 2s and 2p orbitals. The hybridization scheme for O3 involves mixing the 2s and two of the 2p orbitals to form three sp2 hybrid orbitals with one unhybridized 2p orbital. The three sp2 hybrid orbitals are oriented in a trigonal planar arrangement with a bond angle of approximately 120°. The unhybridized 2p orbital is perpendicular to the plane of the sp2 hybrid orbitals and forms a pi bond with the adjacent oxygen atom. Overall, the hybridization scheme for O3 allows for the formation of a bent molecular geometry with a bond angle of 116.8°, which is consistent with the observed experimental value.

Learn more about hybrid here:

https://brainly.com/question/14140731

#SPJ11

The Lewis structure for PF3 shows a single phosphorus atom with three fluorine atoms bonded to it. The phosphorus atom has one lone pair, represented by two dots, on its valence shell, for a total of 4 electron pairs around the central atom.

We must first ascertain the total amount of valence electrons present in the molecule in order to design the Lewis structure for PF3. Each atom of fluorine (F) contains seven valence electrons, while phosphorus (P) has five, for a total of:

There are 26 valence electrons (1 x 5 + 3 x 7)

The atoms can then be arranged in a fashion that minimises formal charges and ensures that each atom complies with the octet rule. We may create single bonds between each F atom and the core P atom by positioning the phosphorus atom in the centre and the three fluorine atoms surrounding it. 20 valence electrons are left after using 6 of them in this way. The leftover electrons can then be distributed as lone pairs on the F atoms, providing.

learn more about Lewis structure here:

https://brainly.com/question/20300458

#SPJ11

The concentration of sodium ions in 0.300 M NaNO₃ is also 0.300 M.

NaNO₃ dissociates in water to give Na+ and NO₃- ions. Since NaNO₃ is a strong electrolyte, it completely dissociates into ions.

0.300 M NaNO₃ means that there are 0.300 moles of NaNO₃ in 1 liter of solution. Each mole of NaNO₃ dissociates into 1 mole of Na+ ions and 1 mole of NO₃- ions.

Therefore, the concentration of Na+ ions is also 0.300 M. This means that there are 0.300 moles of Na+ ions in 1 liter of solution. The concentration of Na+ ions and NaNO₃ is the same because Na+ ions come from NaNO₃.

Learn more about dissociates here.

https://brainly.com/questions/30983331

#SPJ11

To answer this question, we need to understand the initial rate data for the given reaction. Initial rate data is the rate of reaction at the beginning of the reaction when the reactants are in their highest concentration. The table provides us with the initial rate data for the reaction ocl−(aq) i−(aq)−→−−−−oh−(aq)oi−(aq) cl−(aq) at a certain temperature. We can use this data to determine the rate law for the reaction. The rate law is an equation that relates the rate of reaction to the concentration of the reactants.

To determine the rate law, we need to compare the initial rates of the reaction when the concentration of one reactant is varied while the concentration of the other reactant is kept constant. Based on the initial rate data provided in the table, we can see that the rate of reaction is directly proportional to the concentration of OCl− and I−. This means that the rate law for the reaction is:
Rate = k[OCl−][I−]
where k is the rate constant.
In conclusion, by analyzing the initial rate data for the reaction ocl−(aq) i−(aq)−→−−−−oh−(aq)oi−(aq) cl−(aq) at a certain temperature, we can determine the rate law for the reaction. The rate law is given as Rate = k[OCl−][I−].

To know more about aq visit:

https://brainly.com/question/10898305

#SPJ11

Hi! Based on the given data for the two trials, the ΔH soln (delta H of solution) for urea is as follows:

Trial #1: ΔH soln = 19 kJ/mol
Trial #2: ΔH soln = 13 kJ/mol

learn more  

About urea

https://brainly.in/question/641978?referrer=searchResults

#SPJ11

The value of equilibrium constant (K) for the disproportionation of Aut(aq) at 25 °C is 1.7109 × 10 ⁷⁰.

Modifying the given equations,

3 Au⁺ (aq) → 2Au (s) + Au³⁺ (aq)

2 Au⁺ (aq) + 2e⁻ → 2Au (s)

Reverse reaction,

Au (s) → Au³⁺ (aq) + 2e⁻

Adding the eqns,

[2 Au⁺ (aq) + 2e⁻ → 2Au (s)] + [Au (s) → Au³⁺ (aq) + 2e⁻] → [3 Au⁺ (aq) + 2 Au + Au³⁺]

E° cell = 3.360 - 1.290 = 2.070

E cell = E° cell - RT/nF ln K

At eq, E cell = 0

At 25° C , RT/F = 0.0256 V and number of electrons involved = 2

0 = E° cell - 0.0256/2 ln K

E° cell = 0.0256/2 ln K

2.070 = 0.0128 ln K

ln K = 161.718

K = e¹⁶¹.⁷¹⁸

K = 1.7109 × 10 ⁷⁰

Hence, the value of equilibrium constant (K) for the disproportionation of Aut(aq) at 25 °C is 1.7109 × 10 ⁷⁰.

Learn more about equilibrium constant from the link given below.

https://brainly.com/question/28559466

#SPJ4

The mass of sodium hydroxide needed to make 100.0 ml of a 0.125 M NaOH solution is 0.500 g.

To calculate the mass of NaOH needed, we use the formula:

mass (g) = molarity (mol/L) x volume (L) x molar mass (g/mol)

First, we convert the volume from ml to L by dividing by 1000:

100.0 ml ÷ 1000 ml/L = 0.100 L

Then we substitute the given values into the formula and solve for mass:

mass (g) = 0.125 mol/L x 0.100 L x 40.0 g/mol = 0.500 g

Therefore, 0.500 g of NaOH is needed to make 100.0 ml of a 0.125 M NaOH solution.

To learn more about molarity here

https://brainly.com/question/16587536

#SPJ4

The ∆godiss for acetic acid and monochloroacetic acid is determined by both the enthalpy and entropy contribution.

The enthalpy (∆H) contribution to ∆godiss is due to the energy absorbed or released during the breaking or forming of bonds between the molecules. The entropy (∆S) contribution is due to the degree of randomness or disorder in the system.

For acetic acid, the enthalpy contribution to ∆godiss is negative due to the release of energy during the formation of the hydrogen bond between the carboxyl group and the hydroxyl group. The entropy contribution is also negative due to the decrease in the degree of randomness when the molecules come together to form a solid.

For monochloroacetic acid, the enthalpy contribution is also negative due to the formation of the hydrogen bond and the dipole-dipole interaction between the chlorine atom and the carbonyl group. However, the entropy contribution

To know more about monochloroacetic acid refer here:

https://brainly.com/question/31761018#

#SPJ11

We can use the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature to find the volume of H2 gas  which is 58.2 L.

To calculate the volume of H2 gas produced, we can use the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

First, we need to determine the number of moles of Zn used in the reaction. We can do this by dividing the given mass of Zn by its molar mass. The molar mass of Zn is 65.38 g/mol.

Number of moles of Zn = 5.98 g Zn / 65.38 g/mol = 0.0915 mol Zn

According to the balanced equation, the molar ratio between Zn and H2 is 1:1. Therefore, the number of moles of H2 produced is also 0.0915 mol.

Now, we can calculate the volume of H2 gas using the ideal gas law. We need to convert the given pressure from atm to Pa and the temperature from Kelvin to Celsius.

P = 0.978 atm × 101325 Pa/atm = 99,360.45 Pa

T = 298 K

Plugging in the values: V = (nRT) / P

= (0.0915 mol × 8.314 J/(mol·K) × 298 K) / 99,360.45 Pa

= 0.0582 m³ = 58.2 L

Therefore, the volume of H2 gas collected is 58.2 L, which is approximately equal to 4.58 L

LEARN MORE ABOUT gas law here: brainly.com/question/30458409

#SPJ11

Your balanced half-reaction describing the oxidation of solid iron to aqueous iron(II) cations is:

Fe(s) → Fe²⁺(aq) + 2e⁻

To write a balanced half-reaction describing the oxidation of solid iron to aqueous iron(II) cations, follow these steps:

1. Write the unbalanced half-reaction: Fe(s) → Fe²⁺(aq)
2. Balance the atoms other than oxygen and hydrogen: Fe(s) → Fe²⁺(aq) (atoms are already balanced)
3. Balance the oxygen atoms (none in this reaction, so skip this step)
4. Balance the hydrogen atoms (none in this reaction, so skip this step)
5. Balance the charge by adding electrons: Fe(s) → Fe²⁺(aq) + 2e⁻

To understand more about half-reaction : https://brainly.com/question/26411933

#SPJ11

When 1.8 L of a 2.4 M solution of NiCl2 is diluted to 4.5 L, the resulting concentration of the diluted solution can be calculated by using the formula: (initial concentration) x (initial volume) = (final concentration) x (final volume). The resulting concentration of the diluted solution is approximately 0.96 M.

To find the resulting concentration of the diluted solution, we can use the formula for dilution:

(initial concentration) x (initial volume) = (final concentration) x (final volume)

Given:

Initial concentration = 2.4 M

Initial volume = 1.8 L

Final volume = 4.5 L

Substituting the values into the formula, we have:

(2.4 M) x (1.8 L) = (final concentration) x (4.5 L)

Simplifying the equation, we solve for the final concentration:

(final concentration) = (2.4 M) x (1.8 L) / (4.5 L)

(final concentration) ≈ 0.96 M

Therefore, the resulting concentration of the diluted solution is approximately 0.96 M. This means that the concentration of NiCl2 in the solution has been reduced after dilution to a value lower than the initial concentration of 2.4 M.

Learn more about diluted solution here:

https://brainly.com/question/15467084

#SPJ11

The pH of the half way point is approximately 1.59 (rounded to two significant figures).

The reaction between HF and NaOH is:

HF + NaOH → NaF + H₂O

At the half-equivalence point, half of the HF has reacted with NaOH to form NaF, and the other half remains as HF. This means that the moles of NaOH added is equal to the moles of HF consumed.

The initial moles of HF in the solution is:

0.10 mol/L × 0.50 L = 0.050 mol

At the half-equivalence point, 0.025 moles of NaOH has been added, which reacts with 0.025 moles of HF.

The moles of HF remaining in the solution is:

0.050 mol - 0.025 mol = 0.025 mol

The concentration of HF remaining in solution is:

0.025 mol / 0.25 L = 0.10 M

The dissociation of HF in water is:

HF + H2O ↔ H3O+ + F-

The Ka expression for HF is:

Ka = [H3O+][F-] / [HF]

Assuming x is the concentration of H₃O+ and F-, and the initial concentration of HF is equal to its concentration at the half-equivalence point, we can write the equilibrium expression for HF as:

Ka = x^2 / (0.10 - x)

At the half-equivalence point, the concentration of HF remaining in solution is 0.10 M.

Therefore, we can simplify the equation to:

Ka = x^2 / (0.10 - x) ≈ x^2 / 0.10

Solving for x gives:

x = sqrt(Ka × [HF]) = sqrt(6.8 × 10^-4 × 0.10) ≈ 0.026

The pH at the half-equivalence point can be calculated from the concentration of H₃O+:

pH = -log[H₃O+] = -log(0.026) ≈ 1.59

Therefore, the pH of the half way point is approximately 1.59 (rounded to two significant figures).

To learn more about pH refer here:

https://brainly.com/question/15289741#

#SPJ11