can someone pls help me
Answer:
the picture is blurd
Explanation:
Consider the reaction 2NaN3 → 2Na + 3N2, which is the first reaction that occurs when an air bag expands in a car undergoing a collision. This reaction happens very quickly, as you might suspect.
A graph showing the amount of nitrogen gas (N2) could be best described as which sentence?
A.) The graph line’s general trend is decreasing from left to right.
B.) The graph line’s general trend is absolutely horizontal.
C.) The graph line’s general trend is nearly horizontal.
D.) The graph line’s general trend is increasing from left to right.
Answer:
D) The Graph line’s general trend is increasing from left to right.
Explanation:
N2, a product, will increase over time which means the line of the graph would go up over time. Time increases from left to right so the correct answer is D.
The graph that describes the reaction will have a trend in which the graph is decreasing from left to right.
What is a collision?A collision occurs when two particle bump into each other. We know that a reaction takes place when there is an effective collision between the reacting particles.
In this case, the graph that describes the reaction will have a trend in which the graph is decreasing from left to right.
Learn more about reaction:https://brainly.com/question/13110055?
#SPJ2
In healthcare settings where sterilization is an absolute necessity, what method of sterilization will typically be used?
pasteurizing
disinfecting
autoclaving
boiling
lyophilizing
Answer:
Disinfecting (or boiling)
Explanation:
They'd want to disinfect everything so that it is germless. Boiling is a possible answer as well because you can boil certain things to rid them of germs.
The molar mass of barium nitrate (ba(no3)2) is 261.35 g/mol. what is the mass of 5.30 × 1022 formula units of ba(no3)2? 0.0900 g 12.0 g 23.0 g 3,130 g
Molar mass is the ratio of the mass to that amount of the substance. The mass of the barium nitrate in the formula unit is 23.0 grams.
What is mass?The mass of a substance is the product of the molar mass of the compound and the number of moles of the compound.
Given,
Molar mass of barium nitrate = 261.35 g/mol
If, [tex]6.022 \times 10^{23}[/tex] have a mass of 261.35 g/mol then, [tex]5.30 \times 10^{22}[/tex] formula units will have a mass of,
[tex]\begin{aligned}& = \dfrac{261.35 \times 5.30 \times 10^{22}}{6.022\times 10^{23}}\\\\&= 23.0\;\rm gm\end{aligned}[/tex]
Therefore, option C. 23.0 gm is the mass of barium nitrate.
Learn more about mass here:
https://brainly.com/question/24958554
Answer:
CExplanation:
23.0g
A student finds that the mass of 25mL of an unknown liquid is 20.3g. What is the density of this substance?
Answer:
Explanation:
as we know density is g/ml or d=(g/ml) we will plug in the values in their respective positions and get the answer.
So the density is 0.812(round it according to the sig figs it asks for).
Definition of Tissue:
Answer:
any of the distinct types of material of which animals or plants are made, consisting of specialized cells and their products
Explanation:
Does this help you?
Which ecosystem is more likely to become unstable one with many kinds of plants and animals or one with few kinds?
Answer:
One with a few kinds is more likely to become unstable.
Explanation:
A lack of biodiversity means there is a lower chance of them having traits that enable them to adapt to a changing environment. A lack of biodiversity is usually caused by humans. It could be the result of habitat loss, invasive species, overexploitation, pollution, or climate change.
What is required for a steady state reaction that is not required for an equilibrium reaction?.
Answer:
any thing going on within the organism its self- and is not unatural
Explanation:
What is the difference between an endothermic and an exothermic reaction?
Calcite (the main mineral in limestone) is made of calcium carbonate (caco3). dolomite, a related mineral, is made of magnesium carbonate (mgco3). what happens if a geologist drips a small amount of vinegar (acetic acid) onto a sample of dolomite? there is no way to predict what will happen. fizzing will occur because carbon dioxide is produced. no reaction will occur because dolomite contains no calcium.
If a geologist drips a small amount of vinegar (acetic acid) onto a sample of dolomite, fizzing will occur because carbon dioxide is produced.
Why Carbon dioxide show effervescence?Effervescence observes whenever any gas tried to escape out from an aqueous solution, that's why CO₂ show effervescence.
Reaction between dolomite and acetic acid will be represented as:
MgCO₃ + 2CH₃COOH → CO₂ + H₂O + Mg(CH₃COO)₂
From the above reaction it is clear that carbon dixide gas is produced by showing the effervescence and fizzing behavior.
Hence, option (2) is correct.
To know more about dolomite, visit the below link:
https://brainly.com/question/4945288
Answer:
B
Explanation:
on edge2022
What does that mean about the densities of the phases of water?.
Answer:
The solid state is the most dense, followed by the liquid state, then the gas state. The solid state is more dense than the liquid state.
Explanation:
Does this answer your question???
Write balanced chemical equations for dissociation of the following weak acids and identify their conjugate bases: phosphoric acid (H3PO4), formic acid (HCO2H), and boric acid (H3BO3).
The conjugate base of an acid is the negative ion that it forms in solution. The conjugate base of each of the following acids are indicated below;
1) H3PO4(aq) ⇄ H^+(aq) + H2PO4^-(aq)(conjugate base)
2) HCO2H(aq) ⇄ H^+(aq) + HCO2^-(aq) (conjugate base)
3) H3BO3(aq) ⇄ H^+(aq) + H2BO3^- (aq) (conjugate base)
What is a conjugate base?When an acid is dissolved in water it is dissociated into ions. The conugate base of the acid is the negative ion that it forms in solution. Let us now see the conjugate base of each of the ions formed;
1) H3PO4(aq) ⇄ H^+(aq) + H2PO4^-(aq)(conjugate base)
2) HCO2H(aq) ⇄ H^+(aq) + HCO2^-(aq) (conjugate base)
3) H3BO3(aq) ⇄ H^+(aq) + H2BO3^- (aq) (conjugate base)
Learn more about conjugate base: https://brainly.com/question/10468518
60 points please help me i will appreciate it!
Answer:
[tex]\huge\boxed{\sf v = 62.7 \ L}[/tex]
Explanation:
Given Data:
Mole = n = 3.38 mol
Temp = t = 269 K
Pressure = 1.19 atm
Gas constant = R = 0.08206 L atm K⁻¹ mol⁻¹
Required:
Volume = v = ?
Formula:
Pv = nRT
Solution:
Rearranging formula
[tex]\displaystyle v = \frac{nRT}{P} \\\\v = \frac{(3.38)(0.08206)(269)}{1.19} \\\\v = \frac{74.6}{1.19} \\\\v = 62.7 \ L\\\\\rule[225]{225}{2}[/tex]
Which statement best describes the law of conservation of mass? (1 point)
O Chemical symbols are used to show atom balance before and after a reaction.
O Matter cannot be created or destroyed in a chemical reaction.
O Reactants and products cannot escape from a closed system
• Reactants in a chemical reaction rearrange to form a new substance or substances.
Matter cannot be created or destroyed in a chemical reaction best describe law of conservation of mass.
What is law of conservation of mass?The law of conservation of mass states that for any system closed Mass can neither be created not destroy. the mass of the system must remain constant over time,.
Therefore, Matter cannot be created or destroyed in a chemical reaction best describe law of conservation of mass.
Learn more about law of conservation of mass here.
https://brainly.com/question/15289631
Which compound has the empirical formula with the greatest mass?
A.
C2H6
B.
C4H10
C.
C5H10
D.
C6H6
B. C4H10
Butane is a straight chain alkane composed of 4 carbon atoms. It has a role as a food propellant and a refrigerant. It is a gas molecular entity and an alkane.
Mass of C2H6 = 30.07 g/mol
Mass of C4H10 = 58.1222 g/mol
Mass of C5H10 = 70.1329 g/mol
Mass of C6H6 = 78.11184 g/mol
The mass of the empirical formula C6H6 is the greatest of all other compounds.
What is Molar mass?A chemical compound's molar mass is calculated by dividing its mass by the number of moles—measured in moles—that make up the sample of that compound. A substance's overall characteristics include its molar mass. The compound is present in many different forms, each with a different mass as a result of the isotopes. The molar mass is the average of these masses. The molar mass is most frequently calculated using the standard atomic weights and is a function of the relative abundance of the constituent atoms' isotopes on Earth. It is thus a terrestrial average. For converting between a substance's mass and its amount for large quantities, use the molar mass.To learn more about Molar mass, refer to:
https://brainly.com/question/12127540
#SPJ2
Hello people ~
Ignition temperature is the lowest temperature at which a substance catches fire. Identify the correct option regarding the ignition temperature of a good fuel.
A. Ignition temperature below room temperature
B. Ignition temperature above room temperature
C. Ignition temperature equal to 100∘C
D. Ignition temperature equal to room temperature
B is your answer
If the ignition temperature of a fuel is lower than the room temperature, then it can catch fire very easily.
Therefore for an ideal fuel, the ignition temperature should be higher than the room temperature.
let's observe one by one
#1
If ignition temperature is below room temperature the fuel can catch fire at once.
No#2
Ignition temperature above room temperature is applicable as the fuel won't catch fire easily
True#3
It's boiling point of water not fuels
False#4
Equal to room temperature is same as first one can cause damage
No60 points please help me i will appreciate it!
Answer:
[tex]\huge\boxed{\sf T = 682.4 \ K}[/tex]
Explanation:
Given Data:
Mole = n = 0.1 mol
Pressure = P = 530 mmHg = 0.7 atm
Volume = v = 8 L
Ideal gas constant = R = 0.8206 L atm K⁻¹ mol⁻¹
Required:
Temperature = T = ?
Formula:
Pv = nRT
Solution:
Rearranging for T
[tex]\displaystyle T = \frac{Pv}{nR} \\\\T = \frac{(0.7)(8)}{(0.1)(0.08206)} \\\\T = \frac{5.6}{0.008206} \\\\T = 682.4 \ K\\\\\rule[225]{225}{2}[/tex]
Lithium seems to have dramatic effects on the nervous system, yet our bodies seemingly never evolved to use lithium endogenously, rather focusing on sodium, potassium, and calcium. what is a plausible explanation for this?
Given its small size and high polarizing power, lithium is only involved in covalent rather than ionic bonds in the body as does sodium, potassium, and calcium.
What is lithium?Lithium is a metal and a member of group 1 in the periodic table. It is a very small ion hence it has a different chemistry from the rest of the members of the group.
Lithium is not part of any of the biomolecules because given its small size and high polarizing power, it is only involved in covalent rather than ionic bonds in the body as does sodium, potassium, and calcium.
Learn more about lithium:https://brainly.com/question/4219437?r
What phase does chloride occur in?
Answer:
solid
Explanation:
chlorine is liquid
Are all molecules of ideal gas in motion with different velocities?
Explanation:
Individual gas molecules have different speeds. Collisions between these molecules can change individual molecular speeds, but this does not affect the overall average speed of the system.
3. How many moles of solute are present in a 2300 mL solution of 0.68 M MgSO.?
There are 1.56 moles of solute present in a 2300 mL solution of 0.68M MgSO4.
How to calculate number of moles?The number of moles of a substance can be calculated by using the following formula:
molarity = no. of moles / volume
According to this question, a volume of 2300 mL solution is contained in 0.68 M MgSO4. The number of moles is calculated as follows:
no of moles = 0.68M × 2.3
no. of moles = 1.56
Therefore, there are 1.56 moles of solute present in a 2300 mL solution of 0.68M MgSO4.
Learn more about moles at: https://brainly.com/question/12127540
Draw the structure of the major organic product(s) of the reaction. Grinard's
Answer:
There is drawing of the major organic product of reaction
Devise a two‑step synthesis of the alkene from the ketone using the reagents provided
We can convert ketones to alkenes by the use of;
1)B2H6 in THF
2) H2O2/NaOH
What is a ketone?A ketone is a compound of the sort RCO. The compound contains a carbon - oxygen double bond. The ketone can be used in the synthesis of an alkene. The question is incomplete hence I can only give a general answer.
The reaction involves the following reagents;
1)B2H6 in THF
2) H2O2/NaOH
When these two reagents are applied any ketone can be converted to an alkene.
Learn more about ketone: https://brainly.com/question/4439718
The two-step synthesis of the alkene from the ketone using the reagents provided is
Step1: B₂H₆ in THF.
Step2: H₂O₂ / NaOH
What is alkene?An alkene is a hydrocarbon compound containing double bonds between carbons.
The process of making alkenes from ketones or aldehyde is called the witting reaction or witting olefination.
Thus, the two-step synthesis of the alkene from the ketone using the reagents provided is
Step1: B₂H₆ in THF.
Step2: H₂O₂ / NaOH
Learn more about alkene
https://brainly.com/question/13910028
#SPJ4
A student adds 0. 0030 mol of hcl to 100 ml of a 0. 10 m solution of a r2nh, a weak base. The ph of the solution is found to be 11. 10
Since an acidic salt solution is produced when a strong acid neutralizes a weak base, the pH of the salt solution formed when HCl is added to R2NH will be less than 7.
What is a neutralization reaction?A neutralization reaction is the react ion between an acid and a base to form salt and water only.
Neutralization reactions can either produce a neutral solution, an acidic solution or an alkaline solution at equivalence point.
When a strong acid is added to a weak base, the pH of the salt solution formed will be less than 7.
Therefore, the pH of the salt solution formed when HCl is added to R2NH will be less than 7.
Learn more about pH at: https://brainly.com/question/940314
Oxidation reactions involve the loss of __________.
Answer:
Electrons
Explanation:
What mass of glucose can be produced from photosynthesis reaction using 10.0 mols co2
Answer:
300.06 grams of glucose can be produced from a photosynthesis reaction that occurs using 10 moles of carbon dioxide.
Explanation:
Calculate the volume that 2.25 mol of o2(g) will occupy at stp.
Explanation:
[tex]2.25mol \times \frac{22.4lit}{1mol} = 50.4 lit o2 [/tex]
Can somebody please help write a short paragraph about this including all the words listed in the question. Thanks!
WILL MARK BRAINLIEST WHOEVER CAN ANSWER FIRST!!! :DDDD
Answer:
Vaccines work by stimulating your immune system to produce antibodies, exactly like it would if you were exposed to the disease. After getting vaccinated, you develop immunity to that disease, without having to get the disease first.
Which of the following compounds would be expected to have the strongest ionic bonds?
the compound that has the largest ions with the greatest charge
the compound that has the largest ions with the least charge
the compound that has the smallest ions with the greatest charge
the compound that has the smallest ions with the least charge
Answer:
the compound that has the smallest ions with the greatest charge
The compound that has the smallest ions with the greatest charge will have the strongest ionic bonds. Therefore, option C is correct.
What are ionic compounds?Ionic compounds can be defined as solids formed by closely packed ions of opposite charge. An Ionic compound is commonly formed when metal combines with non-metal.
In ionic compounds, the ions are held together by ionic bonds. The ions are created by accepting or losing electrons in order to get their nearest noble gas configuration. In a reaction, the metals have a tendency to lose electrons to complete their octet while non-metals will gain electrons to fill their octet.
An ionic bond or electrovalent bond is a type of linkage generated from the electrostatic attraction between oppositely charged ions. Such a bond produces when the valence electrons of one atom are transferred permanently to another.
The more the charge on the ions and the smaller the ions stronger the ionic bond will be formed.
Learn more about ionic compounds, here:
brainly.com/question/17217225
#SPJ2
Which two elements will be the most alike and why?
Which two elements will be the most alike and why?
Lithium (Li) and Sodium (Na) because they are both metals and are in the same group
Oxygen (O) and Neon (Ne) because they are both noble gases
Helium (He) and Hydrogen (H) because they are both non-metals and are in the same row.
Explanation:
The first statement is correct
Li &Na