The industry that Steve Jobs did not revolutionize through his innovations as Apple's CEO was cable television.
As Apple's CEO, the late Steve Jobs orchestrated innovations that revolutionized all of these industries except cable television. The industries that he did revolutionize include music, smartphones, digital publishing, and tablet computing. He revolutionizes the music industry with the iPod and iTunes, smartphones with the iPhone, digital publishing with the iPad, and tablet computing with the iPad as well.
Learn more about Steve Jobs: https://brainly.com/question/31506774
#SPJ11
in what flight condition must an aircraft be placed in order to spin
In order for an aircraft to spin, it must be placed in a specific flight condition known as an aggravated stall. This occurs when the angle of attack of the aircraft is too high and the airflow over the wings becomes disrupted, causing a loss of lift.
As a result, one wing may stall before the other, creating an unequal lift distribution that can cause the aircraft to enter a spin. Pilots must be trained to recognize and recover from this dangerous situation in order to prevent accidents.
In order to spin, an aircraft must be placed in a specific flight condition known as a "stall." A stall occurs when the angle of attack is too high, causing a reduction in lift and an increase in drag. To initiate a spin, the aircraft must be in a stalled condition and have a yawing motion (rotation around the vertical axis). This combination of factors causes one wing to generate more lift than the other, resulting in the spinning motion.
Visit here to learn more about aircraft:
brainly.com/question/28246952
#SPJ11
In order for an aircraft to spin, it must be in a stall condition. A stall occurs when the angle of attack (AOA) is too high, causing the airflow over the wings to separate and the lift generated by the wings to decrease. When the AOA reaches the critical angle of attack, the airflow can no longer create enough lift to keep the aircraft in the air, and it begins to descend.
For more such question on vertical axis
https://brainly.com/question/29774083
#SPJ11
This manipulator is used to establish a field width for the value that follows it: field_width set field setw iomanip None of these
The manipulator used to establish a field width for the value that follows it is setw from the iomanip library in C++. It allows you to specify the number of characters that should be used for the output of the value.
For example, if you want to output a value with a field width of 5, you would use set w(5). This will ensure that the value is formatted with 5 characters, adding spaces as necessary to achieve the desired width. So the correct option in this case would be "set field setw iomanip". The term "set field set w iomanip" does not make sense in this context.
The manipulator used to establish a field width for the value that follows it is "setw". This term is part of the iomanip library in C++. So, the correct answer is "setw". The other terms mentioned in the question, such as "field_width", "set field", and "setw ioman ip", are not relevant to the context of the question.
Visit here to learn more about iomanip library:
brainly.com/question/28343948
#SPJ11
The manipulator in question is called "setw" and it is a part of the "iomanip" library in C++. option c is correct.
This manipulator is used to set the field width for the value that follows it. The value can be a string, integer, or any other data type.
The purpose of setw is to make the output more readable and organized by aligning the data in columns. For example, if you are printing a table with multiple columns, you can use setw to set the width of each column so that the data is aligned and easy to read.
The syntax for using setw is as follows:
cout << setw(10) << "Hello";
In this example, setw(10) sets the field width to 10 characters for the string "Hello". This means that "Hello" will be printed with a width of 10 characters, even if it is shorter than that. If the string is longer than 10 characters, it will be truncated to fit within the allotted space.
Overall, setw is a useful manipulator for formatting output in C++. It helps to make the output more readable and organized, which is important when dealing with large amounts of data.
For such more question on setw
https://brainly.com/question/30436807
#SPJ11
Note: The complete question would de as bellow,
This manipulator is used to establish a field width for the value that follows it:
a)field_width
b)set field
c)setw
d)iomanip
e)None of these
by purchasing software that gathers data and predicts trends in the most popular genres without any extra programming, the library can purchase the books that people will read
By utilizing software that collects data and forecasts trends in popular genres, the library can make informed decisions on which books to purchase. This ensures that the library's collection stays up-to-date and aligns with the reading interests of the community, ultimately leading to increased patron satisfaction and engagement.
By purchasing software that gathers data and predicts trends in the most popular genres, the library can make informed purchasing decisions on the books that people are likely to read. This eliminates the need for extra programming and ensures that the library's collection stays relevant and in-demand. The software can analyze data such as user preferences, browsing history, and book ratings to generate accurate predictions on which books will be popular in the future. This ultimately saves the library time and money by avoiding the purchase of books that may not be well-received by their audience. Overall, investing in such software can greatly benefit the library's collection development strategy and help them better serve their community's reading needs.
By utilizing software that collects data and forecasts trends in popular genres, the library can make informed decisions on which books to purchase. This ensures that the library's collection stays up-to-date and aligns with the reading interests of the community, ultimately leading to increased patron satisfaction and engagement.
To learn more about software, click here:
brainly.com/question/985406
#SPJ11
By purchasing software that gathers data and predicts trends in the most popular genres, the library can make informed decisions when acquiring new books.
This approach ensures that the library's collection remains up-to-date and relevant to the interests of its patrons, ultimately increasing the likelihood that people will read the selected books. Furthermore, this software eliminates the need for extra programming, saving time and resources.Such data-driven decisions also allow the library to maximize its budget, as it can focus on purchasing titles that are more likely to be borrowed and enjoyed by the community. Additionally, understanding trends in popular genres can assist the library in creating targeted promotions and events, further engaging patrons and fostering a love for reading.In summary, utilizing software that gathers data and predicts trends in popular genres is an efficient and cost-effective way for a library to maintain a relevant and engaging collection. This approach benefits both the library and its patrons by ensuring a diverse and appealing selection of books that cater to the community's interests.For such more question on fostering
https://brainly.com/question/31458527
#SPJ11
Assume:
A = 1101 0011 1111 0110
B = 0110 1101 1101 1110
Write the series of operations necessary to pack A into B (and store the result in C), where the 8 lowest order bits of B are stored in the 8 highest order bits of C, and the 8 highest order bits of A are stored in the 8 lowest order bits of C.
To pack A into B and store the result in C, the following operations can be performed.
What is the explanation for the above response? Perform a logical shift right on A by 8 bits, which will result in 0000 0000 1101 0011.Perform a logical shift left on B by 8 bits, which will result in 1011 0110 1101 1110.Perform a logical OR operation between the results of step 1 and step 2, which will result in 1011 0110 1111 1110.Perform a logical shift left on A by 8 bits, which will result in 0000 0000 0000 0000.Perform a logical shift right on B by 8 bits, which will result in 0000 0000 0110 1101.Perform a logical OR operation between the results of step 4 and step 5, which will result in 0000 0000 0110 1101.Perform a logical OR operation between the results of step 3 and step 6, which will result in C = 1011 0110 1111 1110 0000 0000 0110 1101.Learn more about operations at:
https://brainly.com/question/9697567
#SPJ1
for overdamped or critically damped systems, the rise time is the time it takes the transient response to go from a of the step change voltage to b of the step change voltage. group of answer choices a - 20%, b - 80% a - 50%, b - 50% a - 10%, b - 90% a - 0%, b - 100%
For overdamped or critically damped systems, the rise time is the time it takes the transient response to go from a of the step change voltage to b of the step change voltage. The correct answer is a - 10%, b - 90%. This means that the rise time is the time it takes for the transient response to go from 10% to 90% of the step change voltage.
It is important to note that the rise time is dependent on the damping ratio of the system, which affects the speed at which the transient response reaches its steady state value.For overdamped or critically damped systems, the rise time is the time it takes for the transient response to go from a of the step change voltage to b of the step change voltage, where a and b are specific percentages of the final steady-state value.The correct answer is a - 10%, b - 90%.In an overdamped or critically damped system, the response of the system to a step change in voltage is slower than in an underdamped system, and there is no oscillation in the response. The rise time is defined as the time it takes for the output to rise from 10% to 90% of its steady-state value.For example, if the steady-state value of the output is 100 volts, the rise time for an overdamped or critically damped system would be the time it takes for the output to rise from 10 volts to 90 volts (i.e., 10% to 90% of 100 volts).Overall, the rise time is an important characteristic of the transient response of a system, as it determines how quickly the system responds to changes in input and reaches its steady-state value.For overdamped or critically damped systems, the rise time is the time it takes the transient response to go from 10% (a) of the step change voltage to 90% (b) of the step change voltage. So, the correct answer is: a - 10%, b - 90%.
To learn more about critically damped click on the link below:
brainly.com/question/13161950
#SPJ11v
For overdamped or critically damped systems, the rise time is the time it takes the transient response to go from 0% of the step change voltage to 100% of the step change voltage.
For overdamped or critically damped systems, the rise time is the time it takes the transient response to go from a of the step change voltage to b of the step change voltage, where a is 0% and b is 100%.
Therefore, the answer would be a - 0%, b - 100%.
Learn more about voltage: https://brainly.com/question/31519346
#SPJ11
The Weld Center Vertices option is available for which of the
following Fill Hole Mode settings?
As a general overview, the term "Weld Center Vertices" typically refers to a feature or option that is used in 3D modeling or computer-aided design (CAD) software.
What is the feature used for?This feature is usually used in conjunction with a "Fill Hole" mode, which is a tool that is used to fill in holes or gaps in 3D models.
When the "Weld Center Vertices" option is enabled in a "Fill Hole" mode, the software will attempt to connect the vertices or points around the hole by creating a new surface or face that is centered on the vertices. This can be useful for creating a more uniform and seamless 3D model, particularly when dealing with complex shapes or irregular surfaces.
Read more about 3D models here:
https://brainly.com/question/29306858
#SPJ1
You are troubleshooting an application problem and want to eliminate faulty memory as a source of the problem. Which command do you use?Mdsched.exe. Mds.chace. Mds.con
If you are troubleshooting an application problem and suspect that faulty memory may be the cause of the issue, you can use the "mdsched.exe" command to check for any memory problems.
"mdsched.exe" command runs the Windows Memory Diagnostic tool, which will test your computer's memory for any errors or issues. Once the test is complete, it will provide you with a report that you can use to determine whether faulty memory was indeed the source of the problem. It is important to eliminate faulty memory as a possible cause before moving on to other troubleshooting steps, as memory issues can often be the root cause of many application problems.
To troubleshoot an application problem and eliminate faulty memory as a source of the issue, you should use the command "mdsched.exe". This is done as follows:
1. Open the Run dialog box by pressing the Windows key + R.
2. Type "mdsched.exe" into the dialog box and hit Enter.
3. The Windows Memory Diagnostic tool will open, offering options to restart now and check for problems or check for problems the next time you start your computer.
4. Choose the appropriate option to run the memory diagnostic test.
This command, mdsched.exe, will run the Windows Memory Diagnostic tool, which is designed to detect and diagnose any issues with your computer's memory. By using this tool, you can confirm whether or not faulty memory is contributing to your application problem.
Learn more about Windows Memory Diagnostic tool (WMD) here:
brainly.com/question/22895405
#SPJ11
Hi! To eliminate faulty memory as a source of an application problem, you should use the command "mdsched.exe".
This command launches the Windows Memory Diagnostic tool, which checks your computer's memory for any issues that might be causing the problem with your application.
Learn more about application problem: https://brainly.com/question/13818690
#SPJ11
a parallel rlc circuit contains a resistor r = 1 ω and an inductor l = 2 h. select the value of the capacitor so that the circuit is critically damped
To design a critically damped parallel RLC circuit with a resistor R = 1Ω and an inductor L = 2H, you need to select the value of the capacitor C according to the following formula: C = 1 / (4 * R * L) Plug in the values for R and L: C = 1 / (4 * 1 * 2) C = 1 / 8 So, you need to select a capacitor with a value of 1/8 F (0.125 F) for the circuit to be critically damped.
To calculate the value of the capacitor required to make the parallel RLC circuit critically damped, we need to use the formula for the damping ratio, which is given by: ζ = R / (2√(L/C)) where R is the resistance, L is the inductance, C is the capacitance, and ζ is the damping ratio. For critically damped behavior, ζ = 1, which means: 1 = R / (2√(L/C)) Substituting the given values of R = 1 Ω and L = 2 H, we get: 1 = 1 / (2√(2/C)) Squaring both sides and rearranging, we get: C = 8/9 F Therefore, the value of the capacitor required to make the parallel RLC circuit critically damped is 8/9 F.
Learn more about circuit here-
https://brainly.com/question/27206933
#SPJ11
To make a parallel RLC circuit critically damped, the value of the capacitor should be chosen so that the damping factor is equal to 1. In a parallel RLC circuit, the damping factor can be calculated using the formula:
damping factor = R / (2 * √(L * C))
Given that R = 1 Ω and L = 2 H, we can rearrange the formula to find the value of the capacitor (C):
C = (R^2) / (4 * L)
Plugging in the values, we get:
C = (1^2) / (4 * 2) = 1 / 8
Therefore, the value of the capacitor needed for the circuit to be critically damped is C = 1/8 F (farads).
Learn more about critically damped: https://brainly.com/question/31519346
#SPJ11