Answer:
A.
Explanation:
Round the following number to 3 significant figures:
15937
pls helpppp
Answer:
15900
Explanation:
I think hope this helps!! :D
Answer:
15900
Explanation:
All of the facts about our star the Sun listed below are true EXCEPT which option?
A. the sun is the smallest object in our Solar System.
B. the sun is an average-sized yellow star.
C. the sun is located in an arm of the spiral shaped Milky Way galaxy.
D. the sun appears brighter because it is much closer to Earth than other stars
Answer:
A
Explanation:
The sun is the smallest object in our solar system
Answer:
A. the sun is the smallest object in our solar system
Explanation:
In 2009, the Hubble Space Telescope discovered the smallest object ever seen in visible light at the time within the Kuiper Belt. The Kuiper Belt Object (KBO) found was a mere 3,200 feet (975 meters) across and was 4.2 billion miles away.
4. Calculate the heat energy needed to heat 25.0 g of water from 13.0°C to 18.0°C. Use chart above for specific heat of water. Use units and show all work.
Answer: I go search some information
Explanation:I come back with a answer
Mg(OH)2 + 2HNO3 → Mg(NO3)2 + 2H20
If 375.96 grams of H20 are produced, how many grams of HNO reacted? PLS NO LINKS AND ILL GIVE BRAINLIEST
Answer:
A. 1350
You multiply 18.21HNO3* 1mol MgN2O6 * 148.30MgN2O6
Then divide it by the 2mol HNO3 to get 1350
What is the molarity of a solution prepared by dissolving 198 g of BaBr2 in 2.00 liters of solution?
Answer:
The molarity of the solution is 0.335 [tex]\frac{moles}{liter}[/tex]
Explanation:
Molar concentration is a measure of the concentration of a solute in a solution, be it some molecular, ionic, or atomic species.
Molarity is the number of moles of solute that are dissolved in a certain volume and is calculated by:
[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].
Being the molar mass of BaBr2 equal to 297.14 g/mole, that is to say that 1 mole contains 297.14 grams, the mass of 198 grams are contained in:
[tex]198 grams*\frac{1 mole}{297.14 grams} = 0.67 moles[/tex]
So:
number of moles of solute= 0.67 molesvolume= 2 LReplacing in the definition of molarity:
[tex]Molarity=\frac{0.67 moles}{2 L}[/tex]
Solving:
Molarity= 0.335 [tex]\frac{moles}{liter}[/tex]
The molarity of the solution is 0.335 [tex]\frac{moles}{liter}[/tex]
If you wanted to completely react 150 grams of FeBry, how many moles of sulfuric acid (H,SO) will you need to use?
Answer:
Sulfuric acid, spent appears as a black oily liquid. Corrosive to metals and tissue. Density 15 lb /gal.
Explanation:
How many molecules of water are there in 10 lbs of water?
55.556
Explanation:
or something like that
How is energy from grass passed on between animals
What is the temperature
Answer:
I think it mught be 12.9?
Answer:
the average sum of kinetic energy of all the molecules present in a body is called temperature. it's 12.9
hope it is helpful to you
Please help me pretty please
Answer:
The answer would probably be C. The clock can be seen and heard.
What type of circuit has a broken path that does NOT let current flow through it?
A : Closed circuit
B: Open circut
C : Toggle
D : Switch
Answer:
B
Explanation:
Y’all Someone plz help me with these problems.
Girl I will report if u troll or link
Answer:
A. 650 moles of sulphur.
B. 30 g of FeS₂
Explanation:
The balanced equation for the reaction is given below:
Fe + 2S —> FeS₂
From the balanced equation above,
1 mole of Fe reacted with 2 moles of S to produce 1 mole of FeS₂.
A. Determination of the mole of sulphur needed for the reaction.
From the balanced equation above,
2 moles of S reacted to produce 1 mole of FeS₂.
Therefore, Xmol of S will react to produce 325 moles of FeS₂ i.e
Xmol of S = 2 × 325
Xmol of S = 650 moles
Thus, 650 moles of sulphur are needed for the reaction.
B. Determination of the mass of FeS₂ produced by the reaction of 0.5 mole of sulphur.
From the balanced equation above,
2 moles of S reacted to produce 1 mole of FeS₂.
Therefore, 0.5 mole of S will react to produce = (0.5 × 1)/2 = 0.25 mole of FeS₂.
Finally, we shall determine the mass of 0.25 mole of FeS₂. This can be obtained as follow:
Mole of FeS₂ = 0.25 mole
Molar mass of FeS₂ = 56 + (32×2)
= 56 + 64
= 120 g/mol
Mass of FeS₂ =?
Mass = mole × molar mass
Mass of FeS₂ = 0.25 × 120
Mass of FeS₂ = 30 g
Thus, 30 g of FeS₂ were obtained from the reaction.
How many particles are in a 34 g sample of Al2(SO4)3?
please help!
Answer:
5.98 × 10^22 particles
Explanation:
To get the number of particles (nA) in a substance, we multiply the number of moles of the substance by Avogadro's number (6.02 × 10^23)
The mass of Al2(SO4)3 given in this question is as follows: 34grams.
To convert this mass value to moles, we use;
Mole = mass/molar mass
Molar Mass of Al2(SO4)3 = 27(2) + {(32 + 16(4) }3
= 54 + (32 + 64)3
= 54 + 288
= 342g/mol
mole (n) = 34/342
n = 0.0994mol
number of particles (nA) of Al2(SO4)3 = 0.0994 × 6.02 × 10^23
= 0.598 × 10^23
= 5.98 × 10^22 particles
Help!!!!
I can’t understand this question
Answer:
free points!!!!!!!!!!!!!!
9. Circle the atom in each pair that has the greater ionization energy.
A) Li or Be
B) Ca or Ba
C) Na or K
D) P or Ar
E) Cl or Si
F) Li or K
A) Be
B) Ca
C) Na
D) Ar
E) Cl
F) Li
This question simply deals with ionization energy trends across the periodic table or down the group.
Ionization energy is the energy that is needed to remove an electron from its orbital around an atom in such a manner that it will no longer be associated with that same atom.
Now, from studies, it has been found that Ionization energy decreases down a group but it tends to increase as we go from the left to right going across the periodic table.
A) Li(Lithium) and Be(Berrylium) belong to the same period which is period 2 on the periodic table. Berrylium comes after berrylium in that period and as such from the rule earlier, berrylium will have the greater ionization energy.
B) Ca(Calcium) and Ba(Barium) belong to the same group 2 in the periodic table with barium further down the group. Thus, from the trend, Ca(Calcium) will have the greater ionization energy.
C) Na(Sodium) and K(Potassium) belong to the same group 1 in the periodic table with potassium further down the group. Thus, from the trend, Na(Sodium) will have the greater ionization energy.
D) P(Phosphorus) and Ar(Argon) belong to the same period which is period 3 on the periodic table. Argon comes after Phosphorus in that period and as such from the rule earlier, argon will have the greater ionization energy.
E) Cl(Chlorine) and Si(Silicon) belong to the same period which is period 3 on the periodic table. Cl(Chlorine) comes after Si(Silicon) in that period and as such from the rule earlier, Cl(Chlorine) will have the greater ionization energy.
F) Li(Lithium) and K(Potassium) belong to the same group 1 in the periodic table with potassium further down the group. Thus, from the trend, Li(Lithium) will have the greater ionization energy.
Read more at: brainly.in/question/13610645
____H3PO4 + ____ KOH --> ______K3PO4 + ____H2O can someone please balance that chemical equation?
Answer:
H3PO4 + 3KOH ----> K3PO4 + 3H2O
Explanation:
The valency of K element is + 1 while that of PO4 compound is -3
Hence, at least 3 K atoms are needed to combine with PO4 to form K3PO4 compound.
Hence, the revised equation will be
H3PO4 + 3KOH ----> K3PO4 + 3H2O
Now, the number of atoms and charges of each element is a given equation are equal on both the left and right hand side.
What is the pH of a 4.7 x 10-9 M HCl solution? *
4.67
8.33
11.21
2.93
what are the Common compounds of niobium in which it is found
(include common names and their chemical formulas)
plssss help
Explanation:
Common Compounds of Niobium Nb
[Nb+3, Nb+5]
Compound NameFormulaMolar Mass
Niobium(III) OxideNb2O3233.811
Niobium(III) SulfateNb2(SO4)3474.0006
Niobium(V) PhosphateNb3(PO4)5753.576
Niobium(V) BromideNbBr5492.4264
Niobium(V) PentoxideNb2O5265.8098
Niobium OxychlorideNbOCl3215.2648
Niobium(V) IodideNbI5727.4287
Niobium(V) PentachlorideNbCl5270.1714
Niobium(V) ThiocyanateNb(SCN)5383.3184
Niobium(III) ChlorideNbCl3199.2654
Niobium(V) Dihydrogen PhosphateNb(H2PO4)5577.84259
Niobium NitrideNbN106.9131
Niobium(III) DichromateNb2(Cr2O7)3833.77676
Niobium HydroxideNb(OH)3143.9284
Niobium(V) PerchlorateNb(ClO4)5590.15938
Niobium(V) HypochloriteNb(ClO)5350.16838
Niobium(III) HypochloriteNb(ClO)3247.26358
Niobium(V) CarbonateNb2(CO3)5485.85726
Niobium(III) TartrateNb2(C4H4O6)3630.02564
Niobium(III) ChromateNb2(CrO4)3533.79386
Niobium(V) HexafluorosilicateNb2(SiF6)5896.192356
Krupton (Kr) is a
A. Gas
B. Metal
C. Non of these
D. Metalloid
Answer: C. None of these
Explanation: Krypton is a noble gas, on the right side of the period table, making it a non-metal.
what is the difference between quantative and qualitative analysis
Answer:
I guess quantitative data is countable or measurable, relating to numbers; qualitative data is descriptive, relating to words. Quantitative data lends itself to statistical analysis; qualitative data is grouped and categorized according to themes.
Explanation:
Answer:
quantitative - actual numbers as data
Qualitative- uses senses (taste, touch, etc.)
Explanation:
I’d appreciate any help
Answer:
27 g
Explanation:
From the question,
n = Mv...................... Equation 1
Where n = number of mole of Al₂SO₄, M = Molarity of Al₂SO₄, v = Volume of the solution.
Given: M = 0.12 mol/L, v = 1.5 L.
Substitute these values into equation 1
n = 0.12×1.5
n = 0.18 mol
Also,
n = Mass(m)/Molar mass (m')
n = m/m'.
m = n×m'......................... Equation 2
Given: The molar mass of Al₂SO₄ = (27×2)+32+(16×4) = 150 g/mol
Substitute into equation 2
m = 0.18×150
m = 27 g
Why do silver and copper have similar properties?
(7th Grade science)
Answer:
They are both listed under group 11 on the periodic table and both are highly conductive of electricity
Explanation:
HOPE THIS HELPS ^^
17. When you hold a soda can in your hand, you possess trillions and trillions of aluminum atoms. In one paragraph, using
your own words, explain how ions of aluminum atoms would generally interact based on their charges, and how that
interaction is overcome through metallic bonding to form the can that you hold.
PLEASE PUT REAL ANSWER OR I WILL REPORT YOU
MARKING BRAINLYEST TO FIRST PERSON
In the early 1900's, Paul Drüde came up with the "sea of electrons" metallic bonding theory by modeling metals as a mixture of atomic cores (atomic cores = positive nuclei + inner shell of electrons) and valence electrons. Metallic bonds occur among metal atoms. Whereas ionic bonds join metals to non-metals, metallic bonding joins a bulk of metal atoms. A sheet of aluminum foil and a copper wire are both places where you can see metallic bonding in action.
Metals tend to have high melting points and boiling points suggesting strong bonds between the atoms. Even a soft metal like sodium (melting point 97.8°C) melts at a considerably higher temperature than the element (neon) which precedes it in the Periodic Table. Sodium has the electronic structure 1s22s22p63s1. When sodium atoms come together, the electron in the 3s atomic orbital of one sodium atom shares space with the corresponding electron on a neighboring atom to form a molecular orbital - in much the same sort of way that a covalent bond is formed.
The difference, however, is that each sodium atom is being touched by eight other sodium atoms - and the sharing occurs between the central atom and the 3s orbitals on all of the eight other atoms. Each of these eight is in turn being touched by eight sodium atoms, which in turn are touched by eight atoms - and so on and so on, until you have taken in all the atoms in that lump of sodium. All of the 3s orbitals on all of the atoms overlap to give a vast number of molecular orbitals that extend over the whole piece of metal. There have to be huge numbers of molecular orbitals, of course, because any orbital can only hold two electrons.
The electrons can move freely within these molecular orbitals, and so each electron becomes detached from its parent atom. The electrons are said to be delocalized. The metal is held together by the strong forces of attraction between the positive nuclei and the delocalized electrons Hope this helped
How are stoichiometric calculations performed for redox reactions?
Answer:
(b) Both Assertion and Reason are correct but Reason is not the correct explanation for Assertion
Explanation:
According to the law of conservation of mass, matter can neither be created nor be destroyed. However, it can be transformed from one form into another. During chemical reactions, atoms or ions are exchanged between reactants to form products. Thus, all the stoichiometric calculations are based on law of conservation of mass.
During redox reactions, one species is oxidized and other species is reduced. This involves electron transfer.
Can somebody help me pls pls pls pls pls
Answer:
1.5e + 24 I think, hope this can help
how many atoms in 1kg of platinum
a 2.5x10^24
b 3.1x10^24
Answer:
3.1x10^24 it will be in 1 kg of platinum
how are a dog, a dolphin, and a bat similar to a human?
Answer:
The more structures that are similar, the more closely related organisms are in their evolutionary past. For example, a human, a dog, a fruit bat, and a dolphin all have the same pattern of bone structure in the upper extremity—one bone connected to two bones, connected to many bones, connected to finger-like bones.
Answer:
Explanation:
they are all made of cells
The mass of 0.10 mole of methane
Answer:
A methane molecule is made from one carbon atom and four hydrogen atoms. Carbon has a mass of 12.011 u and hydrogen has a mass of 1.008 u. This means that the mass of one methane molecule is 12.011 u + (4 × 1.008u), or 16.043 u. This means that one mole of methane has a mass of 16.043 grams.
メタン分子は、1つの炭素原子と4つの水素原子から作られています。炭素の質量は12.011uで、水素の質量は1.008uです。これは、1つのメタン分子の質量が12.011 u +（4×1.008u）、つまり16.043uであることを意味します。これは、1モルのメタンの質量が16.043グラムであることを意味します。^>^
The mass of 0.10 mole of methane (CH4) is 1.6grams.
HOW TO CALCULATE MASS?The mass of a substance can be calculated by multiplying the number of moles of the substance by its molar mass. That is;
mass = moles × molar mass
According to this question, there are 0.10 mole in methane (CH4). The molar mass of CH4 is 16g/mol.
Mass of CH4 = 0.10 × 16
Mass of methane = 1.6grams.
Therefore, the mass of 0.10 mole of methane (CH4) is 1.6grams.
Learn more about mass at: https://brainly.com/question/19694949
If those same 25 grams are carbon are reacted, how many moles of carbon dioxide will be produced?
Answer:
I'm am so cool I'm depressed tho so yeah good job lady
Explanation:
help? please and thank you! very much appreciated
Answer:
Option B is correct
Explanation:
The Formula of Nitrate is NO₃⁻
-TheUnknownScientist