a) The probability that exactly two customers arrive between 2:00 p.m. and 4:00 p.m. is 0.0915 (or approximately 9.15%).
b) The probability of at least one customer arriving between 1:00 p.m. and 2:00 p.m. or between 3:00 p.m. and 4:00 p.m. is approximately 0.99999917.
For a Poisson process, the number of arrivals in a fixed time interval follows a Poisson distribution.
Let's denote the number of arrivals in a two-hour period as X.
Since the average number of arrivals per hour is 7, the average number of arrivals in a two-hour period is 14.
Therefore, we have λ = 14.
a) Probability of exactly 2 customers arriving between 2:00 p.m. and 4:00 p.m.:
Using the Poisson distribution formula, the probability of X arrivals in a two-hour period is:
[tex]P(X = x) = (e^{-\lambda} * \lambda^x) / x![/tex]
So, for X = 2, we have:
[tex]P(X = 2) = (e^{-14} * 14^2) / 2! = 0.0915[/tex] (rounded to four decimal places)
Therefore, the probability that exactly two customers arrive between 2:00 p.m. and 4:00 p.m. is 0.0915 (or approximately 9.15%).
b) Probability of at least one customer arriving between 1:00 p.m. and 2:00 p.m. or between 3:00 p.m. and 4:00 p.m.:
We can approach this problem by using the complementary probability. The complementary probability of at least one customer arriving in a two-hour period is the probability of no customers arriving in that period. Since the arrival rate is the same for each hour, we can divide the two-hour period into two one-hour periods and use the Poisson distribution formula for each period separately.
The probability of no customers arriving in a one-hour period with λ = 7 is:
[tex]P(X = 0) = (e^{-7}* 7^0) / 0! = 0.000911[/tex]
The probability of no customers arriving in a two-hour period is the product of the probabilities for each one-hour period:
P(no customers in two-hour period) = P(X = 0) * P(X = 0) = 0.000911 * 0.000911 = 8.30e-7
The complementary probability of at least one customer arriving in a two-hour period is:
P(at least one customer in two-hour period) = 1 - P(no customers in two-hour period) = 1 - 8.30e-7 = 0.99999917 (rounded to eight decimal places).
For similar question on probability.
https://brainly.com/question/29260334
#SPJ11
A football team consists of:
• 10 sixth graders
• 14 seventh graders
• 16 eighth graders
A student on the team will be randomly chosen to participate in the coin toss each of the 40
games of the season.
What is a reasonable prediction for the number of times a sixth or seventh grader will be
chosen?
A reasonable prediction for the number of times a sixth or seventh grader will be chosen is 24 out of the 40 games.
What is reasonable prediction?
A reasonable prediction is a prediction made with a reasonable degree of accuracy or likelihood, based on available information and knowledge. It is based on facts, past events, and logical assumptions, and is not based on conjecture or guesswork. Reasonable predictions can be made about future events, trends, and outcomes, and can be used to inform decisions, plans, and strategies.
The total number of sixth and seventh graders on the team is:
10 sixth graders + 14 seventh graders = 24 students
The total number of students on the team is:
10 sixth graders + 14 seventh graders + 16 eighth graders = 40 students
To find the expected number of times a sixth or seventh grader will be chosen in the coin toss, we can use the proportion of sixth and seventh graders to the total number of students:
(expected number of times) = (proportion of sixth and seventh graders) * (total number of coin tosses)
(expected number of times) = (24/40) * 40
(expected number of times) = 24
Therefore, a reasonable prediction for the number of times a sixth or seventh grader will be chosen is 24.
To learn more about reasonable prediction
brainly.com/question/31255693
#SPJ1
HELP ME PLS
1. If the diameter of a circle is segment AB where Point A is located at (-3, 6), and Point B located at (-8,-1), what is the diameter of the circle?
2√2
√146
√74
74
The diameter of the circle is √74. Answer: C.
What is circle?
A circle is a geometric shape that consists of all points in a plane that are equidistant from a fixed point called the center. It can also be defined as the set of points that are a fixed distance (called the radius) away from the center point.
To find the diameter of the circle, we need to find the distance between points A and B, which will give us the length of the diameter.
Using the distance formula, we have:
d = √[(x2 - x1)² + (y2 - y1)²]
where (x1, y1) = (-3, 6) and (x2, y2) = (-8, -1).
Plugging in the values, we get:
d = √[(-8 - (-3))² + (-1 - 6)²]
= √[(-5)² + (-7)²]
= √[25 + 49]
= √74
Therefore, the diameter of the circle is √74. Answer: C.
To learn more about circle from the given link:
https://brainly.com/question/29142813
#SPJ1
Mr. Yara has 200 acres of land available to plant for three types of fruit trees (lemon, peach and
cherry). Based on the market survey, lemon has a selling price of $2 per kg; peach has a selling
price of $1. 5 per kg and cherry has a selling price of $4 per kg. The average yield per acre for
lemon, peach and cherry is 4, 6 and 2 tonne, respectively. The fertilizer requires per acre for
lemon, peach and cherry is 100, 100 and 50 kg, respectively. An acre of lemon and cherry
requires 10 labour hours each whereas an acre of peach requires 12 labour hours. Maximum
availability of labour is 20,000 hours. The cost of fertilizer is $2 per kg and the cost of labour is
$40 per hour. What is the optimal allocation of acre to the three types of fruit trees?
[1 tonne = 1000kg]
(a) Formulate a linear programming model to maximize the profit.
(b) Find the optimal solution by using simplex algorithm.
(a) The linear programming model to maximize the profit is written as,
Maximize Z = 2(4x1)(100) + 1.5(6x2)(100) + 4(2x3)(1000) - 2(100x1 + 100x2 + 50x3) - 40(10x1 + 12x2)
(b) The optimal solution is x1 = 0, x2 = 8/3, x3 = 8, x4 = 0, and the maximum profit is $40.
(a) Linear programming model:
Let x1, x2, and x3 be the number of acres allocated to lemon, peach, and cherry trees, respectively. Then, the objective function we want to maximize is:
Maximize Z = 2(4x1)(100) + 1.5(6x2)(100) + 4(2x3)(1000) - 2(100x1 + 100x2 + 50x3) - 40(10x1 + 12x2)
The first term represents the revenue from selling lemons, the second term represents the revenue from selling peaches, the third term represents the revenue from selling cherries, the fourth term represents the cost of fertilizer, and the last term represents the cost of labor.
The constraints are:
x1 + x2 + x3 ≤ 200 (total available land)
10x1 + 12x2 + 10x3 ≤ 20000 (total available labor hours)
x1, x2, x3 ≥ 0 (non-negativity constraints)
(b) Simplex algorithm:
Convert the linear programming model into standard form by introducing slack variables and expressing all variables in terms of these variables.
Maximize Z = 2(4x1)(100) + 1.5(6x2)(100) + 4(2x3)(1000) - 2(100x1 + 100x2 + 50x3) - 40(10x1 + 12x2)
Subject to:
x1 + x2 + x3 + x4 = 200
10x1 + 12x2 + 10x3 + x5 = 20000
x1, x2, x3, x4, x5 ≥ 0
In this case, the entering variable is x1, as it has the highest coefficient in the objective function.
Step 5 (continued):
1.6 0.1 0 1 -48 32 <- Z
0.4 0.9 1 1/10 0 40 <- x1
8.4 3.3 0 -1/10 1 1840 <- x5
The entering variable is x3, as it has the highest coefficient in the objective function.
The leaving variable is x1, as it has the smallest ratio of RHS to its coefficient in the x3 column.
x2 x1/12 x3 x5/120 x4 RHS
2.5 1/5 0 -1/60 0 40 <- Z
0.5 -1/5 1 1/60 0 8 <- x3
0.5 2/15 0 1/60 1/10 8/3 <- x2
To know more about linear programming model here
https://brainly.com/question/28036767
#SPJ4
explain why we call the national halothane study an observational study rather than an experiment, even though it compared the results of using different anesthetics in actual surgery.in order to be an experiment, the subjects would have to be randomly selected from the population. however, these are hospital patients who all have some disease or condition and have not been randomly selected from the population, which includes both healthy and sick people.in order to be an experiment, the treatments (choice of anesthetic) would have to be randomly assigned. instead, a patient's anesthetic is selected by his or her doctor(s).there is not enough information to say for sure, but it is safer to assume that it is only an observational study, so that we are not overconfident about the results.actually, it is an experiment and not an observational study.
We the best reason behind why we call National halothane study is an observational study rather than an experiment is: " In order to be an experiment, the treatments (choice of anesthetic) would have to be randomly assigned." So, option( b) is right one.
We have data from the National Halothane Study that correlates with important research into the safety of anesthetics used in surgery. The above shows the death rate and aesthetic. There is a relationship between the anesthetic used and the death of the patient. The data was collected after that the anesthesia was administered is started. In the observational study, interesting observer in the subjects & any treatment that the subjects recive are beyond the council of the investigators. Here the motion of anaesthesia is anesthetics used her determined by the doctors and the investigators are simply observing. So, it is an observational study due to because in order to be an experiment, the treatments (choice of anesthetic) would have to be randomly assigned. Instead, a patient's anesthetic is selected by his or her doctor(s).
For more information about observational study, visit :
https://brainly.com/question/14393640
#SPJ4
Complete question:
The National Halothane Study was a major investigation of the safety of anesthetics used in surgery. Records of over 850,000 operations performed in 34 major hospitals showed the following death rates for four common anesthetics:27 Anesthetic A Death rate B CD 1.7% 1.7% 3.4% 1.9% There is a clear association between the anesthetic used and the death rate of patients. Anesthetic C appears dangerous.
a) in order to be an experiment, the subjects would have to be randomly selected from the population. however, these are hospital patients who all have some disease or condition and have not been randomly selected from the population, which includes both healthy and sick people.
b) in order to be an experiment, the treatments (choice of anesthetic) would have to be randomly assigned. instead, a patient's anesthetic is selected by his or her doctor(s).
c) there is not enough information to say for sure, but it is safer to assume that it is only an observational study, so that we are not overconfident about the results.
d) actually, it is an experiment and not an observational study.
Can someone help me fast with this please!?!?!
If s(d) represents the number of songs downloaded in a year d, what is the interpretation of s(2020) = 5,220,000.
A. 5,220,000 songs were downloaded in the year 2020.
B. There is not enough information to interpret the information.
C. In the year 2020 $5,220,000 was earned from downloaded songs.
D. 2,020 songs were downloaded at a cost of $5,220,000.
the correct answer is A.
5,220,000 songs were downloaded in the year 2020.
If s(d) represents the number of songs downloaded in a year d, what is the interpretation of s(2020) = 5,220,000?The interpretation of s(2020) = 5,220,000 is "5,220,000 songs were downloaded in the year 2020".
Therefore, the correct answer is A. 5,220,000 songs were downloaded in the year 2020.
Interpretation refers to the process of explaining or giving meaning to information, data, or phenomena. It involves analyzing and making sense of information to draw conclusions or make decisions based on the findings.
Interpretation can involve subjective judgment and may depend on the perspective, assumptions, or biases of the interpreter.
to know more about interpretation
brainly.com/question/30932003
#SPJ1
You are helping with some repairs at home. You drop a hammer and it hits the floor at a speed of 4 feet per second. If the acceleration due to gravity (g) is 32 feet/second 2, how far above the ground (h) was the hammer when you dropped it? Use the formula:
Step-by-step explanation:
vf = vo + at vo = 0 in this case ( you dropped it from 'at rest')
4 f/s = 32 t
t = 1/8 s
df = do + vot + 1/2 at^2 df = final position = 0 ft (on the ground)
0 = do + 0 + 1/2 (-32)(1/8)^2
solve for do = 1/4 foot
Juan can run 38 yards in 5 seconds. If he keeps the same pace, how many yards can he run in 30 seconds? Responses
Answer: 228 yards
Step-by-step explanation:
Answer:
228
Step-by-step explanation:
what other patterns can you discover in the subway ridership dataset using calculations with multiple operators?
Subway ridership data can reveal useful patterns through calculations with multiple operators, informing decisions about infrastructure and scheduling to better serve riders' needs.
Why Subway ridership data reveal useful patterns through calculations?The subway ridership dataset can reveal a wealth of information through calculations with multiple operators. One such calculation is the average increase or decrease in ridership during specific time intervals. By comparing ridership during peak and off-peak hours or weekdays versus weekends, it is possible to determine when the subway system is busiest and when it is underutilized.
Another useful calculation is the average percentage change in ridership between different stations or subway lines. This can help identify the most popular stations or lines and can inform decisions about where to allocate resources and infrastructure improvements.
Additionally, it is possible to explore the correlation between ridership and other factors such as weather, events, or holidays. By analyzing how ridership fluctuates in response to external factors, transportation planners can adjust schedules and routes to better serve the needs of riders.
Calculations with multiple operators can also reveal patterns in ridership based on time of year or day of the week. By analyzing the average change in ridership on different days or months, transportation planners can make informed decisions about scheduling and staffing.
Finally, regression analysis can be used to identify the overall trend in ridership over time. By examining long-term ridership trends, transportation planners can identify areas for improvement and plan for future infrastructure projects to better meet the needs of subway riders.
Learn more about Calculation
brainly.com/question/30151794
#SPJ11
Write a sine function that has an amplitude of 3, a midline of y =2 and a period of 1
the sine function that meets the given conditions is:
[tex]y(t) = 3 \times sin ((2\pi / 1200) \times t) + 2[/tex]
Function with the given characteristics.
The terms and their definitions we need to consider:
Amplitude:
The maximum displacement from the midline (in this case, 3)
Midline:
The horizontal line that passes through the center of the wave (y = 2)
Period:
The length of one complete cycle of the wave (1200)
Now, let's write the sine function:
[tex]y(t) = A \times sin (B \times t) + C[/tex]
Where:
y(t) is the sine function with respect to time (t)
A is the amplitude (3)
B is the frequency (to be determined)
C is the midline (2)
First, we need to find the frequency (B).
The period and frequency are related by the following formula:
[tex]Period = 2\pi / B[/tex]
In this case, the period is 1200:
[tex]1200 = 2\pi / B[/tex]
Now, solve for B:
[tex]B = 2\pi / 1200[/tex]
Now, we can plug in the amplitude (A), frequency (B), and midline (C) into our sine function:
[tex]y(t) = 3 \times sin((2\pi / 1200) \times t) + 2[/tex]
For similar questions on Function
https://brainly.com/question/11624077
#SPJ11
the major flaw of the linear probability model is that a. the actuals can only be 0 and 1, but the predicted are almost always different from that. b. the regression r2 cannot be used as a measure of fit. c. people do not always make clear-cut decisions. d. the predicted values can lie above 1 and below 0.
The major flaw of the linear probability model is, Option d, which allows predicted values to range from above 1 to below 0
The binary dependent variable, which accepts values of 0 and 1, and the independent variables are assumed to have a linear relationship under the linear probability model.
The anticipated values from the linear probability model, however, can range from 0 to 1, and in some circumstances, they can be either above or below 0. This goes against the dependent variable's probabilistic character and can produce inaccurate forecasts.
To know more about Linear probability, visit,
https://brainly.com/question/28013612
#SPJ4
!!!!!!I NEED THIS ASAP!!!!!
Find x,y, and z
Applying the right triangle altitude theorem and the leg rule, we have:
5. x = 6; y ≈ 6.7; z ≈ 13.4 6. x = 32; y ≈ 35.8; z ≈ 17.9
What is the Right Triangle Altitude of a Theorem?The right triangle altitude theorem states that the altitude drawn on the hypotenuse of a right triangle is equal to the geometric mean of the two line segments into which the altitude divides the hypotenuse.
5. To find x, apply the right triangle altitude theorem, which is:
x = √(3*12)
x = √36
x = 6
Using the leg rule, we can find y and z. It is expressed as:
hypotenuse/leg = leg/part
Therefore, substitute and find y:
(3 + 12) / y = y / 3
Cross multiply:
y² = 15 * 3
y = √45
y ≈ 6.7
Find z using the leg rule:
15/z = z/12
z² = 180
z = √180
z ≈ 13.4
6. Use the same theorem and leg rule as done in question 5:
Find x:
16 = √(8 * x)
16² = 8x
256 = 8x
x = 256/8
x = 32
Find y using the leg rule:
(8 + 32) / y = y/32
y² = 40 * 32
y = √1,280
y ≈ 35.8
Find z:
40/z = z/8
z² = 40 * 8
z = √320
z ≈ 17.9
Learn more about the right triangle altitude theorem on:
https://brainly.com/question/31068781
#SPJ1
a grocery store company wanted to know how well some of their local stores were doing. in order to find out, they hired three different reviewers to rate 10 local stores. the test statistic was 2.3, what is the p value?
Assuming a two-tailed test with 9 degrees of freedom (10 stores minus 1), the p-value for a t-value of 2.3 is approximately 0.040.
In order to calculate the p-value, we need to know the specific test being used and the significance level of the test. Let's assume that the test is a two-tailed t-test with a significance level of 0.05.
Since the test statistic is 2.3, we need to find the probability of getting a t-value of 2.3 or greater (in absolute value) under the null hypothesis. We can use a t-distribution table or a statistical software to find the corresponding p-value.
Assuming a two-tailed test with 9 degrees of freedom (10 stores minus 1), the p-value for a t-value of 2.3 is approximately 0.040. Therefore, if the significance level of the test is 0.05, we would reject the null hypothesis and conclude that there is a significant difference between the ratings given by the three reviewers.
To know more about statistic here
https://brainly.com/question/15525560
#SPJ4
The function V(t) = 30000(0.85) value V(t) represents the values v(t) of Nancy's car after t years. What is the depreciation rate of Nancy's car?
The depreciation rate of Nancy is 15%.
What is known by depreciation?Depreciation is the reduction in the value of an asset over time due to wear and tear, obsolescence, or other factors. It is a non-cash expense that is recorded on a company's income statement, which reflects the decrease in the asset's value during its useful life. Depreciation is commonly used in accounting to allocate the cost of an asset over its useful life, and it helps businesses to accurately reflect the true value of their assets on their financial statements.
Define function?In mathematics, a function is a relation between a set of inputs and a set of possible outputs with the property that each input is related to exactly one output.
The given function V(t) = [tex](30000*0.85)^{t}[/tex]represents the value of Nancy's car after t years.
Depreciation rate is the rate at which the value of an asset decreases over time. In this case, the depreciation rate of Nancy's car is 1 - 0.85 = 0.15 or 15%.
Learn more about depreciation here:
https://brainly.com/question/17827672
#SPJ1
A small tree that is 8 feet tall casts a 4-foot shadow, while a building that is 24 feet tall casts a shadow in the same direction. Determine the length of the building's shadow.
6 feet
12 feet
18 feet
48 feet
Answer:
Using similar triangles, we can set up a proportion:
(tree height)/(tree shadow) = (building height)/(building shadow)
Plugging in the given values, we get:
8/4 = 24/x
Solving for x, we get:
x = (24 x 4)/8 = 12 feet
Therefore, the length of the building's shadow is B. 12 feet.
true or false: at the initial examination in the framingham study, coronary heart disease was found in 5 per 1000 men ages 30-44, and in 5 per 1000 women ages 30-44. the inference that in this age group men and women have an equal risk of getting coronary heart disease is incorrect because the data are prevalence data and not incidence data. group of answer choices true false
The inference is that, Incorrect because of a failure to distinguish between incidence and prevalence.
What is inference drawn from statistics?
Utilising data analysis to determine characteristics of a probability distribution at play, statistical inference is the process. Through the use of estimation and hypothesis testing, inferential statistical analysis infers characteristics of a population. It is presumed that a bigger population than the observed data set was sampled for this data collection.
What distinguishes random assignment from random sampling inferences?
As a method of choosing participants for your study's sample, random selection or random sampling can be used. The sample can be divided into control and experimental groups using random assignment, however.
Learn more about inference
brainly.com/question/29774121
#SPJ1
The complete question is -
At the initial examination in the Framingham study, coronary heart disease was found in 5 per 1,000 men aged 30yrs to 44yrs and in 5 per 1,000 women aged 30yrs to 44yrs. The inference that in this age group men and women have an equal risk of developing coronary heart disease is Selected Answer: A. Correct Answers: A. Correct B. Incorrect because of a failure to distinguish between incidence and prevalence C. Incorrect because a proportionate ratio is used when a rate is required to support the inference D. Incorrect because of failure to recognize a possible cohort phenomenon E. Incorrect because there is no control or comparison group.
assume the mapping t w p2 ! p2 defined by t a0 c a1t c a2t 2 d 2 a0 c .3 a1 c 4 a2/t c .5 a0 6 a2/t 2 is linear. find the matrix representation of t relative to the basis b d f1; t; t 2 g.
So, the matrix representation of T relative to the basis B = {f1, t, t²} is:
| 2.5 3 0 |
| 0 4 0 |
| 0 0 6 |
To find the matrix representation of the linear transformation T relative to the basis B = {f1, t, t²}, we need to apply T to each element of the basis and then express the result as a linear combination of the basis elements.
Let's apply T to each element of the basis B:
1. T(f1) = T(1) = 2(1) + 0.5(1) = 2.5
2. T(t) = T(c) = 3(c) + 4(c²) = 3f1 + 4t
3. T(t²) = T(c²) = 6(c²) = 6t²
Now, we can express the results as linear combinations of the basis elements:
1. T(f1) = 2.5f1 + 0t + 0t²
2. T(t) = 3f1 + 4t + 0t²
3. T(t²) = 0f1 + 0t + 6t²
Finally, we can form the matrix representation of T relative to the basis B by using the coefficients of the linear combinations as the columns of the matrix:
T matrix = | 2.5 3 0 |
| 0 4 0 |
| 0 0 6 |
Learn more about linear combinations here:
https://brainly.com/question/8502289
#SPJ11
The matrix representation of t with respect to the basis b = [tex]{f1, t, t^2}[/tex] is:
[1/2 -4/3 1 ]
[1 8/3 0 ]
[0 -5/2 3/2 ].
To find the matrix representation of the linear transformation t with respect to the given basis, we need to apply t to each of the basis vectors and represent the result as a linear combination of the basis vectors.
The coefficients of these linear combinations will form the columns of the matrix representation.
First, we apply t to each of the basis vectors:
[tex]t(1) = a0 + a1t + a2t^2 = a0 + a1f1 + a2t - (a1/2)f1 - (3a2/2)t^2[/tex]
[tex]t(t) = a0 + (4/3)a1t + (5/6)a2/t = a0 + (4/3)t + (5/6)t^2 - (4/3)f1 - (5/2)t^2[/tex]
[tex]t(t^2) = a0 + (3/2)a2/t^3 = a0 + (3/2)t^2 - (3/2)f1[/tex]
Next, we represent these results as linear combinations of the basis vectors:
[tex]t(1) = (a0 - a1/2)f1 + (a1 + a2)t - (3a2/2)t^2[/tex]
[tex]= 1f1 + 0t + 0t^2 + (-1/2)f1 + 1t + 0t^2 + 0f1 - (3/2)t^2[/tex]
[tex]= (1/2)f1 + 1t - (3/2)t^2[/tex]
[tex]t(t) = (-4/3)f1 + (a0 + 4/3)t + (5/6)t^2[/tex]
[tex]= 0f1 + 1t + 0t^2 + (-4/3)f1 + (4/3)t + (5/6)t^2 + 0f1 + 0t - (5/2)t^2[/tex]
[tex]= (-4/3)f1 + (8/3)t - (5/2)t^2[/tex]
[tex]t(t^2) = f1 + (a0 - 3/2)t^2[/tex]
[tex]= 0f1 + 0t + 1t^2 + 1f1 + 0t + 0t^2 + 0f1 + (1/2)t^2[/tex]
[tex]= 1f1 + 0t + (3/2)t^2[/tex]
For similar question on matrix.
https://brainly.com/question/2456804
#SPJ11
an appropriations bill passes the u.s. house of representatives with 47 more members voting in favor than against. if all 435 members of the house voted either for or against the bill, how many voted in favor and how many voted against? in favor members against mem
194 member voted against the bill whereas 241 members voted in favour of the bill.
What is bill refers to?A bill usually refers to a piece of paper money, such as a dollar bill or a euro bill.
To solve this problem, we can use algebra. Let's call the number of members who voted against the bill "x". Then, the number of members who voted in favor of the bill would be "x + 47" (since there were 47 more members voting in favor than against).
We know that the total number of members who voted (either for or against) was 435. So, we can write an equation:
x + (x + 47) = 435
Simplifying this equation, we get:
2x + 47 = 435
Subtracting 47 from both sides:
2x = 388
Dividing both sides by 2:
x = 194
So, 194 members voted against the bill, and the number of members who voted in favor would be:
x + 47 = 194 + 47 = 241
Therefore, 241 members voted in favor of the bill.
Learn more about equation here:
https://brainly.com/question/10413253
#SPJ1
Find the measures of angle a and B. Round to the nearest degree.
The measure of angle A and angle B are 28.61 and 61.39 rounded to two decimal place, using trigonometric ratio of tangent for the respective angles.
What is trigonometric ratios?The trigonometric ratios is concerned with the relationship of an angle of a right-angled triangle to ratios of two side lengths.
The basic trigonometric ratios includes;
sine, cosine and tangent.
tan B = 6/11 {opposite/adjacent}
B= tan⁻¹(6/11) {cross multiplication}
B = 28.6105.
tan A = 11/6 {opposite/adjacent}
A= tan⁻¹(11/6) {cross multiplication}
A = 61.3895.
Therefore, the measure of angles A and B are 28.61 and 61.39 rounded to two decimal place, using trigonometric ratio of tangent for the respective angles.
Read more about trigonometric ratios here: https://brainly.com/question/11967894
#SPJ1
What is the remainder? Equation is below.
Answer:
-23. In my explanation I will include in my picture how this will look in your final answer
Step-by-step explanation:
So to solve this, I first set x + 3 = 0. This means that x = -3, which we will use soon. Now, here's how you would work out this problem. It would be confusing if I explained over text, so I included a picture of my work.
You would first set up your problem like it is in the picture. Then, bring 2 down. Next, multiply 2 by -3 (for future problems, you would multiply the number you brought down by whatever number is on the side). -3 × 2 = -6, so you would put that under 3 (as shown in the picture). Now, add 3 and -6 (which = -3). Repeat this step each time.
I hope this made sense! Please let me know if you have any questions.
A pancake company uses the
function f(x) = 1.5x² to calculate
the number of calories in a
pancake with a diameter of x cm.
What is the average rate of change
for the function over the interval
10
A.) 150 calories per cm of diameter
B.) 33 calories per cm of diameter
C.) 65calories per cm of diameter
D.) 215 calories per cm of diameter
Answer:
To find the average rate of change of the function f(x) = 1.5x² over the interval [10, 11], we need to calculate the change in f(x) over the interval, and divide by the change in x.
The change in f(x) over the interval [10, 11] is:
f(11) - f(10) = (1.511^2) - (1.510^2) = 165 - 150 = 15
The change in x over the interval [10, 11] is:
11 - 10 = 1
Therefore, the average rate of change of the function over the interval [10, 11] is:
(15/1) = 15
This means that for every 1 cm increase in diameter (i.e., for every 1 unit increase in x), the number of calories in the pancake increases by an average of 15 calories per cm of diameter.
Therefore, the answer is (A) 150 calories per cm of diameter.
please help with these assap will give brainlest!!
Answer:
below
Step-by-step explanation:
58.
(72 + 75 + 68 + 70 + 73 + 72 + 76 + 72 + 69 + 72 ) divided by 10 = 71.9
59.
order- 68, 69, 70, 72 , 72, 72, 72, 73, 75, 76
median = (72 + 72) divided by 2 = 72
61.
I dont know what MAD means
this is all I could do rn
A survey of 7th and 8th grade student who were asked whether or not they were in favor of or against school uniforms. This two-way table shows the results. How many 7th grade students are against school uniforms?
Please help offering 15 points!!
Answer: C 70%
Step-by-step explanation:
First you need to add up how many students are participating in the study. 4+6+12+8+4=34. There are 24 people who own more than 5 video games. This means that it is 24/34. This equals about 70%
Urgent, please help!
It has been proved that the lines MN and PR are parallel because they have the same slope.
How to identify the slope of parallel lines?We are given the coordinates of the points P, Q and R as:
P(-3, -6)
Q(1, 4)
R(5, -2)
Since M is the midpoint of PQ, we have:
M = (-3 + 1)/2, (-6 + 4)/2
M = (-1, -1)
N is the midpoint of QR and so:
N = (1 + 5)/2, (4 - 2)/2
N = (3, 1)
Slope of MN = (1 + 1)/(3 + 1) = 1/2
Slope of PR = (-2 + 6)/(5 + 3)
Slope of QR = 4/8 = 1/2
Both slopes are equal and as such they are parallel lines
Read more about parallel lines at: https://brainly.com/question/29056723
#SPJ1
find the volume of a cylinder with a diameter of 22 yd and a height of 7 yd
V=π(d
2)2h=π·(20.12
2)2·6.4≈2034.42618m
Please help!! URGENT!! I don’t understand
Answer: 14%
Step-by-step explanation:
Our formula is i=prt but we're trying to find the rate (r) so we'll rearrange it to become r=i/pt.
i = $245
p = $7000
t = 3/12= 0.25 years
[tex]r=\frac{245}{(7000)(0.25)} \\r = 0.14[/tex]
the integers from 1 to 15, inclusive, are partitioned at random into two sets, one with 7elements and the other with 8. what is the probability that 1 and 2 are in the same set?
The chance/
probability
is
16/33
, or roughly 0.485 that 1 and 2 are in the
same set.
Let's say we divide the range of numbers from
1 to 15
into two sets, each containing seven and eight numbers, respectively. Finding the likelihood that the numbers 1 and 2 are included in the same
set
is our goal.
We can determine the
total number
of ways to divide the numbers into the two sets of
7
and
8
in order to begin solving this issue. Calculating this yields the result 6435 using a formula.
The number of ways in which the pairs 1 and 2 can be found in the same set must then be determined. Considering that there are
seven numbers
in the set, we must select six more from the remaining thirteen to complete the set, presuming that one is among the seven .There are
1716
ways to do this. The number of methods remains the same, 1716, even if we suppose that 2 is among the set of 7 numbers.
Hence, there are
3432
different ways to combine the numbers 1 and 2 into one set. The chance is 16/33, or roughly 0.485, when we divide this number by the total number of possible
divisions
of the numbers.
Learn more about
probability:
https://brainly.com/question/14210034
#SPJ4
Solve the Simple Interest
Ruby contributes 12% of the total cost of her individual health care. This is a $57.50 deduction from each of her biweekly paychecks. What is the total value of her individual coverage for the year? Find its employer share.
Using simple interest we know the Total value of annual health coverage is $9000.
What is simple interest?Borrowers must pay lenders simple interest as a fee in exchange for a loan.
Compound interest is excluded from the calculation and just the original principal is used.
Simple interest applies to all loans, not just specific ones.
Additionally, it refers to the kind of interest that banks give their customers on their savings accounts.
So, complete yearly health coverage calculation
Let x be the total annual healthcare budget.
Ruth contributes 18% of the entire cost of healthcare, or $67.50 for two weeks. (ie 15 days)
So, total paid for one month = 67.5 x 2 = 135
The total amount paid for the entire year is 135 x 12 = 1620.
She foots 18% of the overall annual health care costs, as was already established.
Then,
18% x = 1620
18 x / 100 = 1620
x = (1620 x 100) / 18
= $9000
Therefore, using simple interest we know the Total value of annual health coverage is $9000.
Know more about simple interest here:
https://brainly.com/question/25793394
#SPJ1
Correct question:
Ruth contributes 18% of the total cost of her individual health care. This is a $67.50 deduction from each of her biweekly paychecks. What is the total value of her individual coverage for the year?
thompson and thompson is a steel bolts manufacturing company. their current steel bolts have a mean diameter of 137 millimeters, and a variance of 49 . if a random sample of 48 steel bolts is selected, what is the probability that the sample mean would differ from the population mean by greater than 3 millimeters? round your answer to four decimal places.
The probability that the sample mean would differ from the population mean by greater than 3 millimetres is 0.0033 + 0.0033 = 0.0066, rounded to four decimal places.
We are given that the population mean diameter of the steel bolts manufactured by Thompson and Thompson is μ = 137 millimeters and the variance is = 49.
We need to find the probability that the sample mean would differ from the population mean by greater than 3 millimeters.
The standard deviation of the sample means is given by the formula:
[tex]\sigma_{\bar{x}} = \frac{\sigma}{{\sqrt{n}}}[/tex]
Substituting the given values, we have:
[tex]\sigma \bar{x}=\frac{\sqrt{49}}{\sqrt{48}}=1.118[/tex]
To find the probability that the sample mean would differ from the population mean by greater than 3 millimeters,
we need to calculate the z-score:
[tex]z=\frac{(\bar{x}-\mu)}{ \sigma _{\bar{x}}}[/tex]
Substituting the given values, we have:
[tex]z=\frac{\bar{x}-137}{1.118}[/tex]
We want to find the probability that |z| > 3/1.118 = 2.683.
Using a standard normal distribution table, we find that the probability of z > 2.683 is 0.0033.
Since this is a two-tailed test, the probability of z < -2.683 is also 0.0033.
For more questions on standard normal distribution table
https://brainly.com/question/1846009
#SPJ11
Julian goes to a store an buys an item that costs � x dollars. He has a coupon for 20% off, and then a 4% tax is added to the discounted price. Write an expression in terms of � x that represents the total amount that Julian paid at the register.
The expression that represents the total amount that Julian paid at the register in terms of x is 0.84x.
What is Percentage?
Percentage is a way of expressing a proportion or fraction as a quantity out of 100. The word "percent" means "per hundred," so percentages are often denoted by the symbol %, which represents one part in a hundred.
The first step is to find the discounted price after the 20% discount. This can be found by multiplying the original price by (1 - 0.2), which represents a 20% reduction.
Discounted price = x - 0.2x = 0.8x
Next, a 4% tax is added to the discounted price. This can be found by multiplying the discounted price by (1 + 0.04), which represents a 4% increase.
Total amount paid = (0.8x) * (1 + 0.04) = 0.84x
Therefore, the expression that represents the total amount that Julian paid at the register in terms of x is 0.84x.
To learn more about Percentage visit the link:
https://brainly.com/question/24877689
#SPJ1