The acidity or alkalinity of a solution depends upon the concentration of hydronium and hydroxide ions. The pH of a solution is the negative logarithm to the base 10 of the hydronium ion concentration in moles per litre.
The term Kₐ is the acid dissociation constant and it gives the extent to which the acid dissociates. The smaller the value of Kₐ for an acid, the acid will be weaker.
pH = -log [H₃O⁺]
[H₃O⁺] = 10⁻pH = 0.00017
[H₃O⁺] = √Kₐ . c
0.00017 = √Kₐ × 0.001
(0.00017)² = Kₐ × 0.001
Kₐ = 0.0000289 = 2.89 × 10⁻⁵
To know more about acid dissociation constant, visit;
https://brainly.com/question/4363472
#SPJ1
Under what circumstance can static charge cause difficulty transferring a solid during weighing?
High humidity
A solid that easily sublimes
Wearing nitrile gloves
Working in a glovebox
Static charge can cause difficulty transferring a solid during weighing, particularly when wearing nitrile gloves.
Nitrile gloves are made of synthetic rubber, which can generate and accumulate static charge as they come into contact with other materials. This static charge can cause small solid particles to cling to the gloves, making it challenging to transfer them accurately during the weighing process.
High humidity, on the other hand, can reduce the impact of static charge. The moisture in the air helps dissipate static electricity, making it less likely for the solid particles to be attracted to the gloves or other surfaces. However, high humidity can also cause other issues, such as the clumping of hygroscopic materials, which may impact the accuracy of weighing.
A solid that easily sublimes is unlikely to be directly affected by static charge, as it transitions directly from a solid to a gas phase without becoming a liquid. However, the process of sublimation can be affected by other factors, such as temperature and pressure, which can indirectly influence weighing accuracy.
In summary, static charge can cause difficulty transferring a solid during weighing, particularly when wearing nitrile gloves. High humidity can help mitigate this issue by dissipating static electricity but may introduce other challenges. Working with a solid that easily sublimes is less likely to be directly affected by static charge, but other factors can influence the weighing process.
To learn more about nitrile gloves, refer:-
https://brainly.com/question/29770141
#SPJ11
Which of the following equations represents the acid-base neutralization reaction between H2SO4 and KOH? Note that coefficients for balancing the final equation are not included. H2SO4 + KOH → KSO4 + H2O H2SO4 + KOH → K2SO4 + H2O H2SO4 + KOH → KSO4 + H2OH H2SO4 + KOH → K2SO4 + H2OH H2SO4 + KOH → K4SO4 + H2O
The acid-base neutralization reaction between H₂SO₄ (sulfuric acid) and KOH (potassium hydroxide) can be represented by the equation H₂SO₄ + KOH → K₂SO₄ + H₂O.
This reaction involves the combination of an acid and a base to form a salt and water. In this case, sulfuric acid (H₂SO₄) is an acid because it donates hydrogen ions (H⁺) to the reaction, while potassium hydroxide (KOH) is a base because it donates hydroxide ions (OH⁻) to the reaction.
The balanced equation for this reaction is: H₂SO₄ + 2KOH → K₂SO₄ + 2H₂O. The coefficients are added to balance the number of atoms of each element on both sides of the equation. The balanced equation shows that one molecule of sulfuric acid reacts with two molecules of potassium hydroxide to produce one molecule of potassium sulfate and two molecules of water.
It is important to note that in an acid-base neutralization reaction, the pH of the solution is neutralized, meaning it becomes less acidic or less basic, depending on the strength of the acid and the base. In the case of sulfuric acid and potassium hydroxide, the resulting solution will be neutral, with a pH of 7.
To know more about acid-base neutralization reaction, refer to the link below:
https://brainly.com/question/29441732#
#SPJ11
In what way is petroleum, a fossil fuel, distributed on Earth?
Responses
spread evenly, with most places having a lot
spread unevenly, but with all places having at least some
spread evenly, with most places having very little
spread unevenly, with some places having none
Petroleum, being a fossil fuel, is spread unevenly throughout the earth's crust. Hence, option d is the correct answer: spread unevenly, with some places having none.
The distribution of petroleum is largely dependent on the geological history of an area, with areas that were once under ancient oceans or lakes having a higher likelihood of containing petroleum deposits. This has led to countries such as Saudi Arabia, Venezuela, and Canada having large reserves of petroleum, while other regions such as Europe and Africa have smaller reserves or none at all. The uneven distribution of petroleum has significant economic and geopolitical implications, with countries that possess large reserves having greater global influence and wealth.
Learn more about fossil fuel,
https://brainly.com/question/3371055
#SPJ4
Whether the ortho-carboxy substituent acts as an intramolecular general-base catalyst or as an intramolecular nucleophilic catalyst can be determined by carrying out the hydrolysis of aspirin with 18O-labeled water and determining whether 18O is incorporated into ortho-carboxy-substituted phenol. Explain the results that would be obtained with the two types of catalysis.
The presence of 18O in the ortho-carboxy-substituted phenol indicates that the ortho-carboxy group is an intramolecular nucleophilic catalyst in the hydrolysis of aspirin, while the absence of 18O indicates that the ortho-carboxy group is an intramolecular general-base catalyst.
The hydrolysis of aspirin involves the cleavage of an ester bond by water to form salicylic acid and acetic acid. This reaction can be catalyzed by either an intramolecular general-base catalyst or an intramolecular nucleophilic catalyst. The ortho-carboxy substituent in aspirin is known to play a role in catalyzing this reaction.If the ortho-carboxy substituent acts as an intramolecular general-base catalyst, it would facilitate the hydrolysis reaction by donating a proton to the incoming water molecule, making it a stronger nucleophile. In this case, the incorporation of 18O from labeled water into the ortho-carboxy-substituted phenol would be minimal or non-existent, as the catalysis would not involve any direct interaction between the ortho-carboxy group and the water molecule.On the other hand, if the ortho-carboxy substituent acts as an intramolecular nucleophilic catalyst, it would facilitate the hydrolysis reaction by directly attacking the carbonyl carbon of the ester, making it more electrophilic. In this case, the incorporation of 18O from labeled water into the ortho-carboxy-substituted phenol would be significant, as the catalysis would involve direct interaction between the ortho-carboxy group and the carbonyl carbon of the ester.Therefore, the presence of 18O in the ortho-carboxy-substituted phenol would indicate that the ortho-carboxy group acts as an intramolecular nucleophilic catalyst in the hydrolysis of aspirin. Conversely, the absence of 18O in the phenol would indicate that the ortho-carboxy group acts as an intramolecular general-base catalyst or does not play a significant role in catalyzing the reaction.For more such question on substituted phenol
https://brainly.com/question/30262065
#SPJ11
from the following data, determine the order of the reaction with respect to the ligand and substrate, and write the rate equation. (points: 2) [substrate] (m) [ligand] (m) rate (m s-1) 1.0 1.0 5 5.0 1.0 25 10.0 2.0 200
To determine the order of the reaction with respect to the ligand and substrate, we can use the method of initial rates.
For the substrate, we keep the concentration of the ligand constant at 1.0 M and vary the substrate concentration to get the following initial rates:
[substrate] (M) | [ligand] (M) | rate (M/s)
--- | --- | ---
1.0 | 1.0 | 5
5.0 | 1.0 | 25
10.0 | 1.0 | 50
When we double the substrate concentration from 5.0 M to 10.0 M, we see that the rate of the reaction also doubles. This suggests that the reaction is first order with respect to the substrate.
For the ligand, we keep the concentration of the substrate constant at 5.0 M and vary the ligand concentration to get the following initial rates:
[substrate] (M) | [ligand] (M) | rate (M/s)
--- | --- | ---
5.0 | 1.0 | 25
5.0 | 5.0 | 125
5.0 | 25.0 | 625
When we increase the ligand concentration from 1.0 M to 5.0 M, we see that the rate of the reaction increases by a factor of 5. When we increase the ligand concentration from 5.0 M to 25.0 M, we see that the rate of the reaction increases by a factor of 5 again. This suggests that the reaction is second order with respect to the ligand.
Therefore, the rate equation for this reaction is:
Rate = k [substrate]^1 [ligand]^2
where k is the rate constant.
To know more about ligands : https://brainly.com/question/27731806
#SPJ11
The pOH of an aqueous solution of 0. 522 M acetylsalicylic acid (aspirin), HC9H7O4, is _______The hydroxide ion concentration of an aqueous solution of 0. 522 M hypochlorous acid is ______[OH^-]= _____M
Acetylsalicylic acid is a weak acid, so we need to use the Ka value to find the concentration of hydroxide ions. Ka of acetylsalicylic acid (HC₉H₇O₄) is 3.27 × 10⁻⁴ The hydroxide ion concentration of an aqueous solution of 0. 522 M hypochlorous acid is M [OH⁻-]= 2.28 × 10⁻⁴ M
HC₉H₇O₄ + H₂O ⇌ H₃O+ + C₉H₇O₄⁻
Initial: 0.522 M 0 0
Change: -x +x +x
Equilibrium: 0.522 - x x x
Ka = [H₃O+][C₉H₇O₄⁻] / [HC₉H₇O₄]
3.27 × 10⁻⁴ = [tex]x^2[/tex] / (0.522 - x)
As x is very small compared to 0.522, we can approximate the denominator to be 0.522:
3.27 × 10⁻⁴ =[tex]x^2[/tex] / 0.522
x = 1.13 × 10⁻³ M
pOH = -log [OH⁻]
pOH = -log (1.13 × 10⁻³)
pOH = 2.95
The hydroxide ion concentration of an aqueous solution of hypochlorous acid (HOCl) can be found using the Kb value. We can use the fact that Kw = Ka × Kb to find Kb for HOCl.
Kw = Ka × Kb
1.0 × 10⁻¹⁴ = 3.0 × 10⁻⁸ × Kb
Kb = 3.33 × 10⁻⁷
HOCl + H₂O ⇌ H₃O+ + OCl⁻
Initial: 0.522 M 0 0
Change: -x +x +x
Equilibrium: 0.522 - x x x
Kb = [OH⁻][OCl⁻] / [HOCl]
3.33 × 10⁻⁷ = x² / (0.522 - x)
As x is very small compared to 0.522, we can approximate the denominator to be 0.522:
3.33 × 10⁻⁷ =[tex]x^2[/tex]/ 0.522
x = 2.28 × 10⁻⁴ M
[OH⁻] = 2.28 × 10⁻⁴ M
Learn more about Acetylsalicylic acid,
https://brainly.com/question/13188890
#SPJ4
1) How many Faradays are needed to produce
(a) 2.70g of Al
(b) 6.0g of Mg
(c) 10g of H₂
(d) 71g of Cl
2) How many moles of electrons are required to produce by electrolysis:
(a) 27g of Al
(b) 8g of O₂
The amount of Faradays and moles of electrons are required to produce by electrolysis are calculated thus.
How to find Faradays and electrons?(a) The molar mass of Al is 26.98 g/mol, which means that one mole of Al will require 3 moles of electrons to be produced. To find out the number of Faradays needed to produce 2.70 g of Al, calculate the number of moles of Al:
moles of Al = mass of Al / molar mass of Al
moles of Al = 2.70 g / 26.98 g/mol
moles of Al = 0.100 mol
Faraday's law of electrolysis to calculate the number of Faradays needed:
Faradays = moles of substance / n
n = number of electrons per mole of substance
n for Al is 3, so:
Faradays = 0.100 mol / 3
Faradays = 0.0333 F
Therefore, 0.0333 Faradays are needed to produce 2.70 g of Al.
(b) The molar mass of Mg is 24.31 g/mol, which means that one mole of Mg will require 2 moles of electrons to be produced. To find out the number of Faradays needed to produce 6.0 g of Mg, calculate the number of moles of Mg:
moles of Mg = mass of Mg / molar mass of Mg
moles of Mg = 6.0 g / 24.31 g/mol
moles of Mg = 0.247 mol
Use Faraday's law of electrolysis to calculate the number of Faradays needed:
Faradays = moles of substance / n
n = number of electrons per mole of substance
n for Mg is 2, so:
Faradays = 0.247 mol / 2
Faradays = 0.1235 F
Therefore, 0.1235 Faradays are needed to produce 6.0 g of Mg.
(c) The molar mass of H₂ is 2.02 g/mol, which means that one mole of H₂ will require 2 moles of electrons to be produced. To find out the number of Faradays needed to produce 10 g of H₂, calculate the number of moles of H₂:
moles of H₂ = mass of H₂ / molar mass of H₂
moles of H₂ = 10 g / 2.02 g/mol
moles of H₂ = 4.95 mol
Now use Faraday's law of electrolysis to calculate the number of Faradays needed:
Faradays = moles of substance / n
n = number of electrons per mole of substance
n for H₂ is 2, so:
Faradays = 4.95 mol / 2
Faradays = 2.475 F
Therefore, 2.475 Faradays are needed to produce 10 g of H₂.
(d) The molar mass of Cl₂ is 70.91 g/mol, which means that one mole of Cl₂ will require 2 moles of electrons to be produced. To find out the number of Faradays needed to produce 71 g of Cl₂, calculate the number of moles of Cl₂:
moles of Cl₂ = mass of Cl₂ / molar mass of Cl₂
moles of Cl₂ = 71 g / 70.91 g/mol
2 (a) To produce 27g of Al by electrolysis, calculate the number of moles of Al and then use the equation:
1 mole of Al + 3 moles of e⁻ → 1 mole of Al³⁺
Molar mass of Al = 27 g/mol
Number of moles of Al = 27 g / 27 g/mol = 1 mole
Therefore, 3 moles of electrons are required to produce 1 mole of Al.
To produce 27g of Al:
3 moles of e⁻ / 1 mole of Al × 1 mole of Al = 3 moles of e⁻
So, 3 moles of electrons are required to produce 27g of Al by electrolysis.
(b) To produce 8g of O₂ by electrolysis, calculate the number of moles of O₂ and then use the equation:
2 moles of H₂O + electricity → 2 moles of H₂ + 1 mole of O₂
Molar mass of O₂ = 32 g/mol
Number of moles of O₂ = 8 g / 32 g/mol = 0.25 mole
Therefore, 0.5 moles of electrons are required to produce 0.25 mole of O₂.
To produce 0.25 mole of O₂:
0.5 moles of e⁻ / 1 mole of O₂ × 0.25 mole of O₂ = 0.125 moles of e⁻
So, 0.125 moles of electrons are required to produce 8g of O₂ by electrolysis.
Find out more on Faradays here: https://brainly.com/question/1640558
#SPJ1
in this experiment, the reaction of phenylmagnesium bromide and benzophenone formed triphenylmethanol via nucleophilic addition. the same product can also be made through the nucleophilic substitution reaction of ethyl benzoate with phenylmagnesium bromide. write out mechanisms for both reactions and explain why there is different reactivity.
The reaction between phenylmagnesium bromide (PhMgBr) and benzophenone to form triphenylmethanol involves nucleophilic addition.
Here is the mechanism for this reaction:
1. Nucleophilic attack: The lone pair of electrons on the oxygen atom of benzophenone attacks the electrophilic carbon of phenylmagnesium bromide, forming a new bond and creating a tetrahedral intermediate.
PhMgBr + C₆H₅C(O)Ph -> Ph₃C-O-MgBr
2. Proton transfer: A proton transfer occurs from the oxygen atom to the magnesium ion, resulting in the formation of triphenylmethanol and regeneration of the phenylmagnesium bromide.
Ph₃C-O-MgBr + H₂O -> Ph₃C-OH + MgBrOH
On the other hand, the nucleophilic substitution reaction of phenylmagnesium bromide with ethyl benzoate to form triphenylmethanol proceeds through a different mechanism. Here is the mechanism for this reaction:
1. Nucleophilic attack: The nucleophilic carbon of phenylmagnesium bromide attacks the electrophilic carbon of the ester group in ethyl benzoate, forming a new bond and creating a tetrahedral intermediate.
PhMgBr + C₆H₅CO₂Et -> Ph-C(O)OC₆H₅-MgBr
2. Elimination: The alkoxide ion (OR-) formed from the tetrahedral intermediate eliminates the ethoxide ion (EtO-) through intramolecular proton transfer, resulting in the formation of triphenylmethanol.
Ph-C(O)OC₆H₅-MgBr + EtOH -> Ph₃C-OH + EtOMgBr
The reactivity difference arises from the electrophilic nature of the carbonyl carbon in the reactants. In benzophenone, the presence of electron-withdrawing aryl groups increases its electrophilicity, favoring nucleophilic addition. In ethyl benzoate, the electron-donating ethyl group reduces the electrophilicity of the ester carbonyl carbon, favoring nucleophilic substitution.
To know more about the nucleophilic addition refer here :
https://brainly.com/question/29561357#
#SPJ11
F.5 Compare physical and chemical changes PPU
What do these two changes have in common
a crayon melting in the sun
beating an egg
Answer:
Both crayon melting in the sun and beating an egg are examples of physical changes. In both cases, the chemical composition of the substances does not change. Instead, the changes are physical in nature. When a crayon melts in the sun, it changes from a solid to a liquid, but it is still made up of the same molecules. Similarly, when an egg is beaten, it changes from a liquid to a mixture of liquids and solids, but the chemical composition of the egg does not change.
Explanation:
Compared to zinc anodes, magnesium anodes in high resistivty soil
A) will deliver a higher current
B) will deliver a lower current
C) will have a higher efficency
D) are less practical
Answer: the answer is c
Explanation: i took the test and got it right
Using the difference between the total volume of sodium hydroxide solution required to reach the second equivalence point and the volume of sodium hydroxide solution required to reach the first equivalence point, calculate the percent weight (g) by volume (mL), %(w/v), of phosphoric acid in the assigned cola.
The percent weight by volume of phosphoric acid in the assigned cola is 0.263% (w/v).
To calculate the percent weight by volume of phosphoric acid in the assigned cola, need to follow these steps:
Determine the molecular weight of phosphoric acid, which is H₃PO₄ The atomic weights are: H=1, P=31, O=16. Therefore, the molecular weight of [tex]H_3PO_4[/tex] is:
MW(H₃PO₄) = 3 x MW(H) + MW(P) + 4 x MW(O)
= 3 x 1 + 31 + 4 x 16
= 98 g/mol
Calculate the amount of phosphoric acid in the cola sample used in the titration. Let's assume used 25 mL of the cola sample for the titration, and found that it required 35 mL of 0.1 M sodium hydroxide solution to reach the second equivalence point, and 15 mL to reach the first equivalence point. The difference between these volumes is:
35 mL - 15 mL = 20 mL
This means that 20 mL of 0.1 M sodium hydroxide solution reacted with the phosphoric acid in the cola sample.
From the balanced chemical equation for the reaction between phosphoric acid and sodium hydroxide, know that 1 mole of H₃PO₄ reacts with 3 moles of NaOH. Therefore, the amount of H₃PO₄ in the cola sample is:
(20 mL x 0.1 mol/L) / 3 = 0.67 mmol
And the mass of [tex]H_3PO_4[/tex] in the cola sample is:
0.67 mmol x 98 g/mol = 65.66 mg
Calculate the weight by volume percent of phosphoric acid in the cola sample. Since used 25 mL of the cola sample for the titration, the weight by volume percent of phosphoric acid is:
(65.66 mg / 25 mL) x 100% = 0.263% (w/v)
Therefore, the percent weight by volume of phosphoric acid in the assigned cola is 0.263% (w/v).
To know more about phosphoric acid
https://brainly.com/question/3700851
#SPJ4
SCH3U1
Lesson 4.4
1. When 3.62 g of anhydrous calcium chloride, CaCl2, is left open to the air, 1.17 g of water is
absorbed. Determine the formula of the hydrated compound that is formed.
The formula of the hydrated compound is [tex]CaCl_{2} . 2H_{2}O,[/tex] which is also known as calcium chloride dihydrate.
To determine the formula of the hydrated compound formed when 3.62 g of anhydrous calcium chloride absorbs 1.17 g of water, we need to use the law of definite proportions, which states that the elements in a compound are always present in a fixed ratio by mass.
First, we need to find the moles of anhydrous calcium chloride and water absorbed:
Moles of [tex]CaCl_{2}[/tex] = 3.62 g / 110.98 g/mol = 0.0326 mol
Moles of [tex]H_{2}O[/tex] = 1.17 g / 18.02 g/mol = 0.0649 mol
Next, we need to determine the mole ratio of anhydrous calcium chloride to water in the hydrated compound. To do this, we can divide both moles by the smaller mole value:
Moles of [tex]CaCl_{2}[/tex] / 0.0326 = 1
Moles of [tex]H_{2}O[/tex] / 0.0326 = 1.99
The mole ratio of [tex]CaCl_{2}[/tex] to [tex]H_{2}O[/tex] is approximately 1:2, indicating that the hydrated compound is likely a dihydrate.
Learn more about hydrated compounds, here:
https://brainly.com/question/29792483
#SPJ1
Write balanced half-reactions for the following redox reaction:10CO2(aq)+2Mn+2(aq)+8H2O(l)→ 5C2O−24(aq)+2MnO−4(aq)+16H+(aq)OxiadtionReduction
The balanced equation:
[tex]10CO2(aq) + 2Mn^2+(aq) + 8H2O(l) → 5C2O4^{2-(aq)} + 2MnO4^{-(aq)} + 16H+(aq)[/tex]
The balanced half-reactions for the given redox reaction are:Oxidation: [tex]5CO2 + 8H2O + 16e- → 2C2O4^{2-} + 32OH^-[/tex]Reduction: [tex]Mn^2^+ + 4H2O → MnO4^- + 8H+ + 5e-[/tex]To balance the number of electrons, the oxidation half-reaction is multiplied by 2, and the reduction half-reaction is multiplied by 5.[tex]2(5CO2 + 8H2O + 16e- → 2C2O4^2^- + 32OH-)\\5(Mn^2+ + 4H2O → MnO4^- + 8H+ + 5e-)[/tex]Overall balanced equation:[tex]10CO2(aq) + 2Mn^2+(aq) + 8H2O(l) → 5C2O4^{2-(aq)} + 2MnO4^{-(aq)} + 16H+(aq)[/tex]In the oxidation half-reaction, carbon dioxide (CO2) is oxidized to oxalate ion [tex](C2O4^{2-})[/tex], and in the reduction half-reaction, manganese ion [tex](Mn^2^+)[/tex] is reduced to permanganate ion ([tex]MnO4^-[/tex]). The electrons transferred in both half-reactions are balanced, and the overall equation is balanced by making sure the number of each element and charge is the same on both sides of the equation.For more such question on balanced equation
https://brainly.com/question/26694427
#SPJ11
Help me out here please if you know anything with graphs+ chem.
Based on the potential energy diagrams below, determine which reaction will occur fast and why?
Answer:
Diagram A
Explanation:
Diagram A shows that there is a lower activation energy (arrow indicated at X). When there is a lower activation energy, it means that the reactants can convert into products at a faster rate so overall, there is an increased rate of reaction.
Whereas Diagram B has a much larger activation energy so more energy will be needed to convert products into reactants.
complete the mechanism for the reaction between acetone in acid and bromine by adding the missing bonds, atoms, charges, nonbonding electrons, and curved arrows (forward reaction only).
The complete mechanism involves protonation of acetone, bromination of the protonated acetone, and deprotonation of the brominated intermediate. The curved arrows indicate the movement of electrons during these reactions.
1. Identify the reactants: Acetone (CH3COCH3) and Bromine (Br2).
2. In the presence of an acid, acetone becomes protonated, forming a resonance-stabilized cation: CH3COCH3 + H+ → CH3COCH2+ + H2O.
3. The protonated acetone reacts with bromine, forming a brominated intermediate: CH3COCH2+ + Br2 → CH3COCH2Br+ + Br-.
4. The brominated intermediate then loses a proton to complete the reaction: CH3COCH2Br+ + H2O → CH3COCH2Br + H3O+.
To know more about acetone and bromine : https://brainly.com/question/30631313
#SPJ11
List the intermolecular forces that exist between molecules (or formula units) in each of the following.
Circle the strongest force that will determine physical properties (e.g., boiling points) for each substance.
CH3Cl
H2 HCl Ne NH3
The strongest force that will determine physical properties is dipole-dipole forces.
The strongest force that will determine physical properties is hydrogen bonding.
The strongest force that will determine physical properties is London dispersion forces.
[tex]CH_3Cl[/tex]: The intermolecular forces that exist between[tex]CH_3Cl[/tex] molecules are dipole-dipole forces and London dispersion forces. The strongest force that will determine physical properties is dipole-dipole forces.
[tex]H_2[/tex]: The intermolecular force that exists between[tex]H_2[/tex] molecules is London dispersion forces. The strongest force that will determine physical properties is London dispersion forces.
HCl: The intermolecular forces that exist between HCl molecules are dipole-dipole forces and London dispersion forces. The strongest force that will determine physical properties is dipole-dipole forces.
Ne: The intermolecular force that exists between Ne atoms is London dispersion forces. The strongest force that will determine physical properties is London dispersion forces.
[tex]NH_3[/tex]: The intermolecular forces that exist between NH3 molecules are hydrogen bonding, dipole-dipole forces, and London dispersion forces. The strongest force that will determine physical properties is hydrogen bonding.
learn more about intermolecular forces
https://brainly.com/question/17111432
#SPJ11
Which of the following affects the amount by which the freezing point of liquid is lowered by the addition of a solute? More than one answer may be correct.
1.The volume of the solvent.
2.The amount of the compound dissolved.
3. The identity of the chemical species being dissolved.
4. The value of the freezing point for the pure solvent.
5. How soluble the solute is in the solvent.
The correct answers are 2. The amount of the compound dissolved, 3. The identity of the chemical species being dissolved, 4. The value of the freezing point for the pure solvent, and 5.
The freezing point depression is directly proportional to the amount of solute added, the identity of the solute affects the degree of freezing point depression.
The lower the freezing point of the solvent the greater the depression, and the solubility of the solute in the solvent affects how much solute can dissolve and thus affects the freezing point depression. The volume of the solvent does not affect the amount of freezing point depression.
To know more about freezing point depression : https://brainly.com/question/31357864
#SPJ11
Identify the ions and their charges in Mg3N2.
a. Mg+, N3-
b. Mg2+, N3-
c. Mg32+, N23-
d. Mg3+, N2-
Option b. The ions and their charges in Mg3N2 are Mg2+ and N3-.
Mg3N2 is a chemical compound made up of three magnesium ions (Mg2+) and two nitrogen ions (N3-). In this compound, each magnesium ion has a positive charge of 2+ and each nitrogen ion has a negative charge of 3-.
The ions and their charges in Mg3N2 are Mg2+ and N3-.
The ions and their charges in Mg3N2 are found in option b. Mg2+ and N3-.
In the compound Mg3N2, magnesium (Mg) loses two electrons to form a stable 2+ ion, while nitrogen (N) gains three electrons to form a stable 3- ion. As a result, the correct ion charges for this compound are Mg2+ and N3-.
Hence, The correct option is b. Mg2+ and N3- are the ions and their charges in the compound Mg3N2.
learn more about ions click here:
https://brainly.com/question/13692734
#SPJ11
Of the following, which forms a weakly acidic solution? Assume all acids and bases are combined in stoichiometrically equivalent amounts. Select the correct answer below: a.NH3(aq)+HCl(aq)âNH4Cl(aq) b.HClO4(aq)+LiOH(aq)âLiClO4(aq)+H2O(l) c.2HI(aq)+Ca(OH)2(aq)âCaI2(aq)+2H2O(l) d.2HNO3(aq)+Sr(OH)2(aq)âSr(NO3)2(aq)+2H2O(l)
Of the given options, only (a) forms a weakly acidic solution when an acid and a base are combined in stoichiometrically equivalent amounts.
Ammonium chloride (NH₄Cl), a salt that can dissociate in water to release ammonium ions (NH₄⁺) and chloride ions (Cl⁻), is created when stoichiometrically equivalent amounts of ammonia (NH₃) and hydrochloric acid (HCl) are mixed. Ammonium ions can, however, also function in water as a mild acid by giving water a proton (H⁺) in order to create hydronium ions (H₃O). As a result, the final solution will have a low acidity.
The following choices represent basic or neutral solutions:
(b) Because perchloric acid (HClO₄) and lithium hydroxide (LiOH), which are both potent acids and bases, combine to produce water and lithium perchlorate (LiClO₄), a salt that does not further dissociate in water, (b) creates a neutral solution.
(c) Because hydroiodic acid (HI) and calcium hydroxide (Ca(OH)₂) are strong acids and bases, respectively, and because of their reaction to produce calcium iodide (CaI₂) and water, which do not further dissociate in water, (c) creates a basic solution.
(d) Since strontium hydroxide (Sr(OH)₂) and nitric acid (HNO₃) are both potent acids and bases, respectively, their reaction produces strontium nitrate (Sr(NO₃)₂) and water, neither of which further dissociates in water. Therefore, (d) also produces a neutral solution.
To know more about the stoichiometrically equivalent amounts refer here :
https://brainly.com/question/31327881#
#SPJ11
a common buffer involves the use of ammonia and ammonium nitrate. will the concentration of ammonium ion go up or down if a small amount of naoh is added to a buffer solution containing ammonia and ammonium nitrate?
When a small amount of NaOH is added to a buffer solution containing ammonia and ammonium nitrate, the concentration of ammonium ion will go down. This is because NaOH is a strong base that will react with the ammonium ion in the buffer solution, converting it into ammonia and water.
The reaction between NaOH and ammonium ion is as follows:
NH4+ + OH- → NH3 + H2O
As a result, the concentration of ammonium ion decreases while the concentration of ammonia increases. This shift in the concentration of ammonium ion and ammonia does not significantly affect the pH of the buffer solution since ammonia is a weak base that can still accept protons from water molecules, maintaining the buffer capacity.
However, it is important to note that if too much NaOH is added, the buffer capacity of the solution will be overwhelmed, leading to a significant change in pH. Therefore, it is important to add only a small amount of NaOH to the buffer solution to avoid disrupting its buffering capacity.
In conclusion, when a small amount of NaOH is added to a buffer solution containing ammonia and ammonium nitrate, the concentration of ammonium ion goes down as it reacts with the strong base NaOH to form ammonia and water.
for more such questions on ammonium
https://brainly.com/question/14854495
#SPJ11
Question 23
Marks: 1
The rate at which atoms of radioactive sources (radionuclides) disintegrate are measured in
Choose one answer.
a. rems
b. rods
c. curies
d. roentgens
The rate at which atoms of radioactive sources, or radionuclides, disintegrate is measured in curies. A curie is a unit of measure for the amount of radioactive material present. It represents the amount of radioactive material in which 37 billion atoms disintegrate per second.
The disintegration of radionuclides produces ionizing radiation, which can be measured in rems or roentgens.
A rem is a unit of measurement for the amount of ionizing radiation absorbed by living tissue, while a roentgen is a unit of measurement for the amount of ionizing radiation in the air.
In summary, the rate at which atoms of radioactive sources disintegrate is measured in curies, while the amount of ionizing radiation produced by the disintegration can be measured in rems or roentgens. It is important to understand these units of measurement in order to properly monitor and regulate exposure to ionizing radiation, as it can have harmful effects on living organisms.
The rate at which atoms of radioactive sources (radionuclides) disintegrate is measured in curies (c).
To explain further, radioactive sources contain unstable atoms, called radionuclides. These radionuclides undergo disintegration or decay, during which they emit radiation. To quantify this process, we use various units.
Curies (Ci) is a unit of measurement specifically used to express the activity of a radioactive substance, or how quickly atoms in the radioactive source are disintegrating. One curie represents 37 billion disintegrations per second.
It's important to note the other units you mentioned:
- Rems (roentgen equivalent in man) is a unit used to measure the biological impact of ionizing radiation on human tissue.
- Roentgens (R) is a unit used to measure the exposure to ionizing radiation, specifically the amount of radiation that produces a certain amount of ionization in air.
- Rods is not a unit related to radioactivity, but might be confused with control rods, which are used in nuclear reactors to control the rate of nuclear reactions.
In summary, the appropriate unit for measuring the rate at which atoms of radioactive sources disintegrate is curies.
Learn more about radioactive at : brainly.com/question/1770619
#SPJ11
consider carbonyl compounds a-e drawn below. in this question you will rank these compounds in order of stability and reactivity. part 1 out of 4 rank a-e in order of increasing stability. (you should consider the stability of the carbonyl functional group.) smith6e1853 which of the following options correctly places these compounds in order of increasing stability? b < d < a < e < c a < e < c < d < b c < e < a < d < b a < c < e < d < b e < c < a < d < b
The order of increasing stability of the carbonyl functional group is e < c < a < d < b..
What is carbonyl ?Carbonyl is an organic compound that contains a carbon-oxygen double bond (C=O). This double bond is one of the most important functional groups in organic chemistry, as it exists in a variety of compounds and can undergo a wide range of reactions. The carbonyl group is composed of a carbon atom bonded to an oxygen atom that is doubly bonded to the carbon atom. This double bond gives the carbonyl group special reactivity, as the electrons in the double bond can be used to form new bonds with other atoms.
This is because the compounds with the most electron-withdrawing groups on the carbonyl carbon are the most stable. Compound e is the most stable, as it has a triple bond on the carbonyl carbon. Compound c is the next most stable, as it has a halogen (Cl) substituent on the carbonyl carbon. Compound a is the third most stable, as it has an ether group on the carbonyl carbon. Compound d is the fourth most stable, as it has an alkyl group on the carbonyl carbon. Finally, compound b is the least stable, as it has no substituents on the carbonyl carbon.The correct answer is e < c < a < d < b .
To learn more about Carbonyl
https://brainly.com/question/13564853
#SPJ4
magnesium ions are removed in water treatment by the addition of slaked lime,____. write a balanced chemical equation to describe what occurs in this proce
When slaked lime is added to water containing magnesium ions, a precipitation reaction occurs. The slaked lime reacts with the magnesium ions to form magnesium hydroxide, which is insoluble and settles out of the water. The balanced chemical equation for this reaction is:
Ca(OH)2 + Mg2+ → Mg(OH)2(s) + Ca2+
In this equation, the slaked lime (Ca(OH)2) reacts with the magnesium ions (Mg2+) to form solid magnesium hydroxide (Mg(OH)2) and calcium ions (Ca2+).
Overall, the addition of slaked lime to water treatment helps to remove magnesium ions, which can cause hardness and other issues in water. By forming insoluble magnesium hydroxide, the ions are effectively removed from the water and the quality is improved.
To know more about magnesium ions click here:
https://brainly.com/question/1698012
#SPJ11
What federal agency oversees the disposal of hazardous waste?
OSHA
EPA
CSB
DOE
The federal agency is responsible for overseeing the disposal of hazardous waste is the Environmental Protection Agency b. (EPA). The EPA is an essential government organization in the United States that protects human health and the environment by developing and enforcing regulations related to pollution and waste management.
It operates under the authority of federal laws, such as the Resource Conservation and Recovery Act (RCRA), which provides guidelines for the proper management and disposal of hazardous waste.
While the EPA is the primary agency in charge of hazardous waste management, other federal agencies like the Occupational Safety and Health Administration (OSHA), the Chemical Safety Board (CSB), and the Department of Energy (DOE) also play significant roles in ensuring the safe handling of hazardous materials.
OSHA is responsible for establishing and enforcing workplace safety standards, including those for handling hazardous waste. It aims to protect the health and safety of workers who may come into contact with dangerous substances.
The CSB is an independent federal agency that investigates industrial chemical accidents, with the goal of improving chemical safety and preventing similar incidents. While it does not have regulatory authority, its findings and recommendations help inform regulations and best practices.
The DOE is primarily focused on energy policy and research, but it also manages nuclear waste disposal and works to ensure the safe storage and handling of nuclear materials.
In summary, the EPA is the primary federal agency overseeing the disposal of hazardous waste, while OSHA, CSB, and DOE play essential roles in regulating and ensuring the safe handling of hazardous materials.
The complete question is:-
What federal agency oversees the disposal of hazardous waste?
a. OSHA
b. EPA
c. CSB
d. DOE
To learn more about hazardous waste, refer:-
https://brainly.com/question/19946867
#SPJ11
Write a project report on the topic panch tantva for class 9th
Panch Tattva refers to the five basic elements of nature - earth, water, air, fire, and space. To write a project report on this topic, you can follow the below-mentioned steps:
Introduction - Begin your report by introducing the concept of Panch Tattva and its importance in Hinduism and other religions.
Earth - Describe the element earth and its significance. Discuss the properties, uses, and importance of earth in our daily lives.
Water - Discuss the element water and its significance. Describe the properties, uses, and importance of water in our daily lives.
Air - Discuss the element air and its significance. Describe the properties, uses, and importance of air in our daily lives.
Fire - Discuss the element fire and its significance. Describe the properties, uses, and importance of fire in our daily lives.
Space - Discuss the element space and its significance. Describe the properties, uses, and importance of space in our daily lives.
Conclusion - Summarize the importance of Panch Tattva and its relevance in our daily lives.
To know more about the Project, here
https://brainly.com/question/29094859
#SPJ1
when two ions from an ionic bond, what type of compound is formed?
Answer:
ionic compound
Explanation:
When two ions come together to form a compound, they form an ionic compound. Ionic compounds are made up of positively charged ions (cations) and negatively charged ions (anions) that are held together by electrostatic attraction.
For example, sodium chloride (NaCl) is an ionic compound formed when a sodium ion (Na+) and a chloride ion (Cl-) come together. The sodium ion loses an electron to become a positively charged ion, while the chloride ion gains an electron to become a negatively charged ion. The oppositely charged ions attract each other, forming a crystal lattice structure.
Other examples of ionic compounds include magnesium oxide (MgO), potassium iodide (KI), and calcium carbonate (CaCO3).
The easiest and best source for TLV data is
- The manufacturer's MSDS
- The ACGIH
- TOXNET
- The OSHA website.
The easiest and best source for TLV data is the ACGIH.
Among the options provided, the American Conference of Governmental Industrial Hygienists (ACGIH) is the most straightforward and reliable source for Threshold Limit Value (TLV) data.
The ACGIH is a professional organization that develops and publishes TLV data based on extensive research and expert consensus.
While the manufacturer's MSDS, TOXNET, and the OSHA website can provide TLV data, the ACGIH is specifically dedicated to establishing these values and is frequently updated.
Hence, In conclusion, the ACGIH is the easiest and best source for obtaining accurate TLV data among the provided options.
learn more about Hygienists click here:
https://brainly.com/question/22510725
#SPJ11
Which of the following will exhibit the greatest change in pH when 1.0 mL of 1.5 M NaOH is added to it? Select the correct answer below: A. 50 mL of a buffer solution that is 0.20 M in CH3COOH and 0.20 M in NaCH3COO B. 100 ml. of a buffer solution that is 0.10 M in CH3COOH and 0.10 M in NaCIH3COO C. an unbuffered solution that is 0.10 M in CH3COOH D. an unbuffered aqueous solution that is 0.10 M in NaCH3COO
The buffer solution that is 0.20 M in CH3COOH and 0.20 M in NaCH3COO will exhibit the greatest change in pH when 1.0 mL of 1.5 M NaOH is added to it. Therefore option A is correct.
The buffer solution is designed to resist changes in pH when small amounts of acid or base are added. The greater the buffer capacity, the smaller the change in pH will be.
The buffer solution that is 0.20 M in CH3COOH and 0.20 M in NaCH3COO will exhibit the greatest change in pH when 1.0 mL of 1.5 M NaOH is added to it. This is because the buffer solution has a higher concentration of the weak acid CH3COOH and its conjugate base NaCH3COO, providing a greater buffer capacity.
The presence of both the weak acid and its conjugate base allows the buffer solution to effectively neutralize the added base and minimize the change in pH.
Know more about buffer solutions:
https://brainly.com/question/31367305
#SPJ12
What is the pressure of a 19 L container if it contains 25 moles of gas at 0 Celsius?
R = 0.0821 (atm L/mol K)
PV=nRT
round your answer to two decimals.
The pressure of the 19 L container, given that it contains 25 moles of gas at 0 °C is 29.49 atm
How do i determine the pressure of the container?First, we shall list out the given parameters from the question. This is shown below:
Volume of container (V) = 19 LNumber of mole of gas (n) = 25 moleTemperature (T) = 0 °C = 0 + 273 = 273 KGas constant (R) = 0.0821 atm.L/mol KPressure of container (P) =?The pressure of the container can be obtain as follow:
PV = nRT
P × 19 = 25 × 0.0821 × 273
P × 19 = 560.3325
Divide both sides by 19
P = 560.3325 / 19
P = 29.49 atm
Thus, we can conclude that the pressure of the container is 29.49 atm
Learn more about pressure:
https://brainly.com/question/15343985
#SPJ1
What is the net ionic equation for ammonia and phosphoric acid?
The net ionic equation for ammonia (NH₃) and phosphoric acid (H₃PO₄) is:
NH₃ + H₃PO₄ → NH₄+ + H₂PO₄-
The complete ionic equation, which includes all the ions in the reaction, is:
NH₃ + 3H+ + 3HO₄- → NH₄+ + 3H₂PO₄-
However, in the net ionic equation, the spectator ions (the ions that do not participate in the reaction) are removed, which are H+ and HO₄-. Therefore, the net ionic equation only includes the ions that are involved in the chemical change, which are NH₃, H₃PO₄, NH₄+, and H₂PO₄-.
Learn more about ionic equation,
https://brainly.com/question/29299745
#SPJ4