Conjugates of strong bases are ions from groups 1 and 2 of the periodic table. The conjugate of a strong base is basic in solution.
A strong base dissociates completely in solution to produce its conjugate.
A strong base is a substance that completely dissociates in water to produce hydroxide ions (OH⁻). Since it completely dissociates, it does not have any remaining undissociated molecules or ions in the solution. Therefore, the conjugate of a strong base is simply the ion that is left over after the base dissociates, which is always a simple metal cation (from group 1 or 2 of the periodic table) and a hydroxide ion (OH⁻).
For example, sodium hydroxide (NaOH) is a strong base that dissociates completely in water to produce sodium ions (Na⁺) and hydroxide ions (OH⁻). The conjugate of NaOH is simply the sodium ion (Na⁺), which is a simple metal cation from group 1 of the periodic table.
The conjugate of a strong base is basic in solution because it is capable of accepting a proton (H⁺) from a water molecule to reform the original strong base. This is because the conjugate base has a pair of unshared electrons on the hydroxide ion that can accept a proton from water. Therefore, the conjugate base acts as a weak acid in the solution.
To learn more about conjugates please visit
https://brainly.com/question/29753209
#SPJ1
Why do you think only two drops of phenolphthalein are used in these titrations? (Hint: Phenolphthalein is a weak acid.)
Phenolphthalein is a commonly used indicator in acid-base titrations because it changes color at a pH around 8.2-10.0.
Phenolphthalein itself is a weak acid and has a specific equilibrium between its acidic and basic forms. When added to an acidic solution, it is predominantly in the acidic form and colorless. As the titration progresses and the solution becomes more basic, the equilibrium shifts towards the basic form which is pink.
The amount of indicator used in the titration should be kept to a minimum to avoid affecting the accuracy of the results. Using too much indicator can affect the stoichiometry of the reaction, leading to inaccurate results.
Therefore, only a small amount of phenolphthalein, typically two drops, is used to minimize its impact on the titration while still providing a clear visual indication of the endpoint.
To learn more about phenolphthalein refer to:
brainly.com/question/14804470
#SPJ4
A gas sample at constant pressure and temperature filled with Helium gas had a volume of 221 mL and 4.00 moles. If the volume is increased to 500 ml what is the number of moles of Helium gas that could occupy the container? 0.11 K 9.05 kPa 0.11 kPa 9.05 mol
The number of moles of Helium gas that could occupy the container when the volume is increased to 500 mL is 9.05 mol.
What is the number of moles of the gas?We can use the combined gas law to solve this problem:
(P1 x V1) / (n1 x T1) = (P2 x V2) / (n2 xT2)
where;
P is pressure, V is volume, n is number of moles, and T is temperature.We know that the pressure and temperature are constant, so we can simplify the equation to:
V1/n1 = V2/n2
Solving for n2, we get:
n2 = (V2n1) / V1
Plugging in the values, we get:
n2 = (500 mL * 4.00 mol) / 221 mL
n2 = 9.05 mol
Learn more about number of moles here: https://brainly.com/question/13314627
#SPJ1
what would be the unit of measurement for a surface area that has degrees farenheit as the height and time as the width?
The unit of measurement for a surface area that has degrees Fahrenheit as the height and time as the width would be square degrees Fahrenheit x time.
Surface area is a measurement of the total area that the surface of an object occupies. The surface area is measured in square units. If the surface of an object is rectangular or square, it is calculated by multiplying the length of the object by the width of the object. For the curved surfaces, the formula for the surface area is complicated. However, the concept of square units remains the same for curved surfaces.
Fahrenheit is a unit of temperature that is used to measure the temperature of an object. This is used primarily in the United States and other countries that have adopted the Imperial system of units. It is based on a scale of 180 degrees between the freezing and boiling points of water, where the freezing point is 32°F and the boiling point is 212°F.
To learn more about Fahrenheit; https://brainly.com/question/30391112
#SPJ11
which statements describe phase changes? check all that apply. particles in a liquid need to move more slowly in order to freeze.
The following statements describe phase changes is particles in a liquid need to move more slowly in order to freeze.
Substances absorb energy when they melt and solidification occurs when the particles lose enough energy to slow down and bond together. In a state of matter, changes occur when temperature or pressure changes. Phase changes involve matter changing from one state to another. A change in a substance's physical form or state is known as a phase change, when water transforms from a liquid to a solid, for example, it is undergoing a phase change. Phase changes, often known as phase transitions, involve the transfer of energy. During a phase change, energy must be added or removed from the system, and this energy is often referred to as latent heat.
In other words, a phase transition is a phenomenon that occurs when a substance alters from one physical state to another. Solid, liquid, and gas are the three physical states of matter, energy must be added to break the bonds between molecules to transform from a solid to a liquid and then from a liquid to a gas. Particles in a liquid need to move more slowly in order to freeze and substances absorb energy when they melt. Solidification occurs when the particles lose enough energy to slow down and bond together. In a state of matter, changes occur when temperature or pressure changes.Phase changes involve matter changing from one state to another.
Learn more about phase transition at:
https://brainly.com/question/3255181
#SPJ11
the identity of an unknown monoprotic organic acid is determined by titration. a 0.173 g sample of the acid is titrated with 0.157 m naoh. what is the molar mass of the compound if 6.12 ml of the naoh solution is required to neutralize the sample?
The molar mass of the unknown monoprotic organic acid is 180.0 g/mol. by titration. If 6.12 ml of the naoH solution is required to neutralize the sample.
In order to determine the molar mass of the unknown monoprotic organic acid, follow the steps given below:
Step 1:
Calculate the number of moles of NaOH used in the titration by using the formula given below:
n(NaOH) = M(NaOH) × V(NaOH)
= 0.157 mol/L × 0.00612 L
= 9.62 × 10^-4 mol
Step 2:
Calculate the number of moles of the acid used in the titration by using the formula given below:
n(acid) = n(NaOH)
= 9.62 × 10^-4 mol
Step 3:
Calculate the mass of the acid used in the titration by using the formula given below:
mass(acid) = n(acid) × M(acid) = 0.173 gM(acid) = mass(acid) / n(acid)
= 0.173 g / 9.62 × 10^-4 mol
= 180.0 g/mol
Therefore, the molar mass of the unknown monoprotic organic acid is 180.0 g/mol.
For more such questions on molar mass , Visit:
https://brainly.com/question/21334167
#SPJ11
a sample of xe takes 75 seconds to effuse out of a container. an unknown gas takes 37 seconds to effuse out of the identical container under identical conditions. what is the most likely identity of the unknown gas?
The most likely identity of the unknown gas that effuses taking 37s is Oxygen(O₂).
Since the unknown gas effuses out faster, it must be lighter than Xe.
The most likely identity of the unknown gas can be determined using Graham's Law of Diffusion. According to this, the time taken for effusion/diffusion of two different gases under identical conditions is directly proportional to the square roots of their densities or molecular masses. It is given as:
t₂/t₁ = √(M₂/M₁)
where t₂,t₁ are the times taken and M₂, M₁ are the molecular masses.
This ratio is determined by the ratio of the molecular weights of the unknown gas and the sample of Xe. The heavier the molecular weight, the slower the rate of effusion.
Rearranging and plugging in the values as t₂= 75s, t₁= 37s, M₁= 131g (for Xe), we get M₂ as follows:
M₂= (37/75)² x 131 = 31.8 ≈ 32g
32g corresponds to the molecular weight of O₂ and it is lighter than Xe.
Therefore, the unknown gas that effuses out of the container faster than the sample of Xe, resulting in the unknown gas taking 37 seconds, and the sample of Xe taking 75 seconds is oxygen(O₂).
To know more about effusion, refer here:
https://brainly.com/question/2655041#
#SPJ11
a solution of cacl2 cacl 2 in water forms a mixture that is 31.5% 31.5 % calcium chloride by mass. if the total mass of the mixture is 195.4 g, 195.4 g, what masses of cacl2 cacl 2 and water were used?
The masses of calcium chloride (CaCl2) and water used to form the mixture are 61.18 g and 134.22 g, respectively.
The mass of calcium chloride (CaCl2):
The percentage of calcium chloride (CaCl2) in the mixture is 31.5%.
Multiply the total mass of the mixture (195.4 g) by 31.5% to find the mass of calcium chloride (CaCl2) in the mixture:
Mass of calcium chloride (CaCl2) = (195.4 g) x (31.5%) = 61.18 g
The mass of water:
Subtract the mass of calcium chloride (CaCl2) from the total mass of the mixture (195.4 g) to find the mass of water in the mixture:
Mass of water = (195.4 g) - (61.18 g) = 134.22 g
Therefore, masses of calcium chloride (CaCl2) and water used to form the mixture are 61.18 g and 134.22 g, respectively.
to know more about calcium chloride refer here:
https://brainly.com/question/15296925#
#SPJ11
A solution with eggs has a [H+] of 1×10−8 M.
Which type of solution is this?
Responses
ionic
basic
acidic
neutral
A solution with eggs has a [H⁺] of 1×10⁻⁸ M is basic in nature which has more pH of 8 which is slightly alkaline, but still considered neutral.
What is solution ?In chemistry, a solution is a homogeneous mixture of two or more substances in relative amounts that can be varied constantly up to the limit of solubility. The term "solution" refers to the liquid state of matter, but solutions of gases and solids are also conceivable. For example, air is a solution made up primarily of oxygen and nitrogen, with trace quantities of several other gases, whereas brass is a solution made up of copper and zinc. The liquid in a solution is known as the solvent, and the substance introduced is known as the solute. If both components are liquids, the difference becomes meaningless; the one with the lower concentration is likely to be referred to as the solute. Any component's percentage in a solution can vary.
pH is directly proportional to hydrogen ion concentration.
To know more about solution ,visit ;
brainly.com/question/30665317
#SPJ1
A solution with eggs has a [H⁺] of 1×10⁻⁸ M is basic in nature which has more pH of 8 which is slightly alkaline, but still considered neutral. The correct option is B.
pH of egg shell?Due to presence of calcium carbonate in the shells it has the pH in the basic range.Egg white is one of the few food products that is naturally alkaline, with an initial pH value that can be as low as 7.6 at the time of lay but with rising alkalinity as the egg ages and can reach pH of 9.2. Whole eggs are typically pH neutral, but egg white is one of the few food products that is naturally alkaline.Eggshells have an alkaline pH. If enough alkaline material is used, it will react with the acid to neutralize some or even all of it.Eggshells that have been ground very finely will barely make a difference in less acidic soil. After the pH of the soil reaches about 6.8, the study in (ref 4) discovered that eggshells no longer effect pH. Because they cease decomposing at a pH of 6.8, they stop modifying the pH.For more information on pH kindly visit to
https://brainly.com/question/15289714
#SPJ1
Complete question:
A solution with eggs has a [H+] of 1×10−8 M.
Which type of solution is this?
Responses
A. ionic
B. basic
C. acidic
D. neutral
write an equation for each acid or base showing its ionization in water, and write the equilibrium constant expression for the weak acid or base
The equation for the ionization of a weak acid in water is HA + H₂O ⇌ H₃O⁺ + A⁻, and the equilibrium constant expression for this reaction is K = [H₃O⁺ ][A⁻]/[HA].
The ionization of a weak base in water is B + H₂O ⇌ OH⁻ + BH+, and the equilibrium constant expression for this reaction is K = [OH⁻][BH⁺]/[B].
Weak acids and bases partially dissociate into their ions in aqueous solutions. For a weak acid, HA, the equilibrium expression for its ionization is HA + H₂O ⇌ H₃O⁺ + A⁻, and the corresponding equilibrium constant expression is K = [ H₃O⁺ ][A-]/[HA].
The same process happens with a weak base, B, where the equilibrium expression is B + H₂O ⇌ OH⁻ + BH⁺, and the corresponding equilibrium constant expression is K = [OH⁻][BH⁺]/[B]. Thus, the equations for the ionization of both weak acids and bases and the corresponding equilibrium constant expressions can be
To know more about equilibrium constant click on below link:
https://brainly.com/question/15118952#
#SPJ11
Dark waters movie
What is the significance of the call from the Kigers?
Answer: In the movie Dark Waters, the call from the Kigers is significant because it leads to the discovery of a link between unexplained cattle deaths and pollution caused by the chemical company DuPont.
Explanation: In the movie Dark Waters, the call from the Kigers is the key moment that sets off the plot. The Kigers, who are farmers in West Virginia, call Robert Bilott, a corporate defense attorney, and ask for his help in investigating the strange deaths of their cattle. Bilott is reluctant to take on the case at first, but he eventually agrees to visit the Kigers' farm and see the situation for himself.
During his visit, Bilott discovers that the Kigers are just one of many families in the area who have experienced unexplained deaths and illnesses among their livestock, as well as health problems among their own family members. Bilott begins to suspect that the cause of these health issues is pollution from a nearby chemical plant owned by DuPont, a multinational chemical company.
Bilott takes on the case and begins a long and difficult legal battle against DuPont, uncovering evidence that the company had long known about the dangers of the chemicals it was using - specifically a substance called PFOA, which was used in the production of Teflon - but had covered up the evidence and misled regulators and the public about the risks.
In the end, the call from the Kigers is significant because it leads to the discovery of a link between unexplained cattle deaths and pollution caused by DuPont, and sets off a series of events that ultimately lead to the exposure of corporate wrongdoing and the pursuit of justice for those affected by the pollution. The Kigers' call is a catalyst for change, prompting Bilott to take action and exposing the truth about a powerful and deceitful corporation.
Hope this helps, and have a great day!
in an equilibrium mixture at 500k, the partial pressure of pcl 5 is 0.860 atm, pcl 3 is 0.350 atm, and cl 2 is 1.22 atm. calculate the equilibrium constant (k p ) for this reaction.
0.493 is the equilibrium constant (k p ) for [tex]PCl_5[/tex] (g) ⇌ [tex]PCl_3[/tex] (g) + [tex]Cl_2[/tex] (g) reaction at 500k.
The reaction is given as
[tex]PCl_5[/tex] (g) ⇌ [tex]PCl_3[/tex] (g) + [tex]Cl_2[/tex] (g)
At 500 K, the partial pressure of [tex]PCl_5[/tex] is 0.860 atm, [tex]PCl_3[/tex] is 0.350 atm, and [tex]Cl_2[/tex] is 1.22 atm.
To calculate the equilibrium constant ([tex]K_P[/tex]) for this reaction, we need to use the equation
[tex]K_P[/tex] = [[tex]PCl_3[/tex]] [[tex]Cl_2[/tex]] / [[tex]PCl_5[/tex]]
Here, [[tex]PCl_5[/tex]] = 0.860 atm
[[tex]PCl_3[/tex]] = 0.350 atm
[[tex]Cl_2[/tex]] = 1.22 atm
Substituting these values, we get
[tex]K_P[/tex] = (0.350)(1.22) / 0.860
[tex]K_P[/tex] = 0.493
Therefore, the equilibrium constant ([tex]K_P[/tex]) for this reaction at 500 K is 0.493.
Learn more about equilibrium constant: https://brainly.com/question/19340344
#SPJ11
a certain organic compound contains only c, h, and o. combustion of 0.1000 g of this compound produced 0.2921 g of co2 and 0.0951 g of h2o. what is the empirical formula of the compound?
The empirical formula of the organic compound is C1H1O1 and the simplified form is CHO.
To find the empirical formula of the compound, we need to determine the mole ratios of the elements in the compound.
First, we need to find the number of moles of CO2 and H2O produced by the combustion of 0.1000 g of the compound:
moles of CO2 = 0.2921 g / 44.01 g/mol = 0.006639 mol
moles of H2O = 0.0951 g / 18.02 g/mol = 0.005275 mol
Next, we need to find the number of moles of C and H in the compound. From the combustion reactions, we know that all of the carbon in the compound is converted to CO2, and all of the hydrogens are converted to H2O.
Therefore, the number of moles of C and H in the compound is equal to the number of moles of CO2 and H2O produced, respectively:
moles of C = 0.006639 mol
moles of H = 0.005275 mol
Finally, we need to find the number of moles of O in the compound. We can do this by subtracting the number of moles of C and H from the total number of moles of elements in the compound, which is equal to the mass of the compound divided by its molar mass:
moles of O = (0.1000 g / molar mass of compound) - moles of C - moles of H
The molar mass of the compound is equal to the sum of the molar masses of its constituent elements:
molar mass of compound = molar mass of C + molar mass of H + molar mass of O
Since we don't know the formula of the compound yet, we can assume a generic formula of CxHyOz and calculate the molar mass of this compound as:
molar mass of compound = x(molar mass of C) + y(molar mass of H) + z(molar mass of O)
Using the atomic masses of C, H, and O, we can calculate the molar masses of these elements as:
molar mass of C = 12.01 g/mol
molar mass of H = 1.01 g/mol
molar mass of O = 16.00 g/mol
Substituting these values, we get:
molar mass of compound = 12.01x + 1.01y + 16.00z
Now, we can solve for the number of moles of O in the compound:
moles of O = (0.1000 g / molar mass of compound) - moles of C - moles of H
Substituting the values we found earlier for moles of C and H, we get:
moles of O = (0.1000 g / (12.01x + 1.01y + 16.00z)) - 0.006639 mol - 0.005275 mol
Simplifying, we get:
moles of O = 0.1000 g / (12.01x + 1.01y + 16.00z) - 0.011914 mol
To determine the empirical formula of the compound, we need to find the smallest whole number mole ratio of the elements in the compound. We can do this by dividing the number of moles of each element by the smallest number of moles:
moles of C / 0.005275 = 1.259
moles of H / 0.005275 = 1.000
moles of O / 0.005275 = (0.1000 g / (12.01x + 1.01y + 16.00z) - 0.011914 mol) / 0.005275
Simplifying, we get:
moles of O / 0.005275 = 18.998 - (1.258x + y)
To find the smallest whole number ratio, we can multiply each mole ratio by a common factor that makes the smallest ratio a whole number. In this case, the smallest ratio is 1:1, so we can multiply each ratio by a factor of approximately 0.79 to make the C and H ratios both equal to 1. This gives us:
C: 1.000
H: 0.790
O: 1.484
Since we want whole numbers, we can round these ratios to the nearest whole number, giving us the empirical formula: C1H1O1 or simply CHO.
Learn more about empirical formulas at
https://brainly.com/question/14044066
#SPJ4
a pure titanium cube has an edge length 2.77 in. how many titanium atoms does i contain? titanium does have a density of 4.50 g/cm^3
The question asks, "How many titanium atoms does a pure titanium cube with an edge length of 2.77 inches contain?"
Given that titanium has a density of 4.50 g/cm^3, thus the number of titanium atoms present in the cube is 2.44 x 1024 atoms.
We can calculate the answer by using the following formula: Atoms = Volume x (Atomic Mass / Molecular Mass)
Step 1: Calculate the volume of the cube: Volume = (Edge Length)3 = (2.77 in)3 = 24.4 in3
Step 2: Calculate the number of atoms: Atoms = 24.4 in3 x (47.867/47.867) = 24.4 in3
Therefore, the pure titanium cube with an edge length of 2.77 inches contains 24.4 in3 of titanium atoms.
Read more about volume:
https://brainly.com/question/463363
#SPJ11
A certain liquid X has a normal freezing point of −0.10∘ C and a freezing point depression constant K f =2.85∘C⋅kg ′mol −1, A solution is prepared by dissolving some urea (CH4N2O) in 600.g of X. This solution freezes at −2.1∘C. Calculate the mass of CH4N 2O that was dissolved. Round your answer to 2 significant digits.
To calculate the mass of CH4N2O dissolved,
we need to follow these steps:
1. Determine the freezing point depression:
ΔTf = T(freezing point of pure X) - T(freezing point of solution) = -0.10°C - (-2.1°C) = 2°C
2. Calculate the molality (m) of the solution using the freezing point depression constant (Kf) and the freezing point depression (ΔTf):
ΔTf = Kf × m
m = ΔTf / Kf = 2°C / 2.85°C·kg/mol = 0.7018 mol/kg
3. Find the moles of CH4N2O in the solution:
moles of CH4N2O = molality × mass of solvent (in kg)
moles of CH4N2O = 0.7018 mol/kg × 0.600 kg = 0.4211 mol
4. Calculate the mass of CH4N2O using its molar mass (60.06 g/mol):
mass of CH4N2O = moles × molar mass = 0.4211 mol × 60.06 g/mol = 25.29 g
Rounded to 2 significant digits,
the mass of CH4N2O dissolved is 25 g.
To learn more about mass of CH4N 2O, visit:
https://brainly.com/question/30570470
#SPJ11
a perchloric acid solution has a ph of 3.158. what is the concentration of perchlorate ion in this solution?
The concentration of perchlorate ion in the solution that has a ph of 3.158 is 7.9 × 10−4 M.
Perchloric acid has the chemical formula HClO4. When it dissolves in water, it completely dissociates into H+ ions and ClO4- ions. The pH of a solution is defined as the negative logarithm of the hydrogen ion concentration [H+].A perchloric acid solution with a pH of 3.158 has an [H+] of 7.9 × 10−4 M, according to the following formula:
pH = −log [H+]
The concentration of the perchlorate ion [ClO4-] can be calculated using the following formula:
Kw = [H+][OH-] = 1 × 10-14 = [H+]2[H+] = 1 × 10-14[H+] = √(1 × 10-14) = 1 × 10-7M[OH-] = Kw/[H+] = (1 × 10-14) / (1 × 10-7) = 1 × 10-7M
The concentration of ClO4- is equal to the concentration of H+ because they are present in equal amounts as a result of complete dissociation of perchloric acid: [ClO4-] = [H+] = 7.9 × 10−4 M.
More on Perchloric acid: https://brainly.com/question/29089251
#SPJ11
A fluorinated organic gas in a cylinder is com- pressed from an initial volume of 910 mL at 156 Pa to 490 mL at the same temperature. What is the final pressure?
Answer in units of Pa.
The problem can be solved using Boyle's Law. The final pressure of the gas in the cylinder is 289.31 Pa.
What is Boyle's Law?Boyle's law is a gas law that describes the relationship between the pressure and volume of a gas at a constant temperature. Boyle's Law states that the pressure and volume of a gas are inversely proportional when temperature is held constant. Mathematically, it can be expressed as:
P₁V₁ = P₂V₂
where P₁ and V₁ are the initial pressure and volume, and P₂ and V₂ are the final pressure and volume.
We can plug in the given values to solve for the final pressure:
P₁ = 156 Pa
V₁ = 910 mL = 0.91 L
V₂ = 490 mL = 0.49 L
P₁V₁ = P₂V₂
156 Pa × 0.91 L = P₂ × 0.49 L
P₂ = (156 Pa × 0.91 L) / 0.49 L
P₂ = 289.31 Pa
Therefore, the final pressure is 289.31 Pa.
To find out more about Boyle's Law, visit:
https://brainly.com/question/30367067
#SPJ1
upon combustion, a compound containing only carbon and hydrogen produces 2.77 gco2 and 0.851 gh2o . find the empirical formula of the compound.
Answer:Gco is 0.953
Explanation:
How many moles of glucose C6H12O6 can react with 15.7 moles of oxygen? C6H12O6 + 6O2 -----------> 6CO2 + 6H2O
2.62 moles of glucose can react with 15.7 moles of oxygen. The balanced chemical equation for the combustion of glucose is:
C6H12O6 + 6O2 → 6CO2 + 6H2O
From the equation, we can see that for every mole of glucose that reacts, 6 moles of oxygen are required. Therefore, the number of moles of glucose that can react with 15.7 moles of oxygen can be calculated as follows:
Number of moles of glucose = (Number of moles of oxygen) / 6
Number of moles of glucose = 15.7 / 6
Number of moles of glucose = 2.62
Therefore, 2.62 moles of glucose can react with 15.7 moles of oxygen.
To know more about oxygen, visit :
https://brainly.com/question/13370320
#SPJ1
which phase change will have a more dramatic increase in entropy? select the statement that best explains why.
Answer: Phase change from solid to gas will have a more dramatic increase in entropy.
This is because gas has the highest entropy of all phases. Gas has the highest entropy because its molecules are moving randomly, and it has the greatest amount of disorder. In addition, the transition from solid to gas involves both increasing temperature and changing the arrangement of particles from an ordered solid to a disordered gas. This results in a significant increase in entropy.
Phase transition refers to the process of changing from one phase of matter to another. When a substance changes from one phase to another, its entropy changes. Entropy refers to the degree of disorder or randomness in a system, and it is related to the number of ways that a system can be arranged. When the degree of disorder increases, the entropy also increases.
In summary, phase change from solid to gas has a more dramatic increase in entropy. This is because gas has the highest entropy of all phases, and the transition from solid to gas involves both increasing temperature and changing the arrangement of particles from an ordered solid to a disordered gas, resulting in a significant increase in entropy.
Learn more about entropy here:
https://brainly.com/question/13135498#
#SPJ11
How many moles are in 1.2 x 10^24 formula units of Li₂SO4? (round your answer to the nearest tenths place)
In 1.2 x [tex]10^{24}[/tex] formula units of [tex]Li_{2} (SO)_{4}[/tex], there are roughly 1.993 moles of
[tex]Li_{2} (SO)_{4}[/tex].
How many moles of [tex]Li_{2} (SO)_{4}[/tex] are contained in 1.2 x [tex]10^{24}[/tex] formula units?Using Avogadro's number, or 6.022 x [tex]10^{23}[/tex] molecules/mol, we can calculate the number of moles of Li2SO4 in 1.2 x [tex]10^{24}[/tex]formula units.
First, we need to figure out how many moles of [tex]Li_{2} (SO)_{4}[/tex] are needed to equal 1.2 x [tex]10^{24}[/tex] formula units:
Formula units equal 6.022 x [tex]10^{23}[/tex] per mole of [tex]Li_{2}(SO)_{4}[/tex].
As a result, there are: 1.2 x [tex]10^{24}[/tex] moles of [tex]Li_{2}(SO)_{4}[/tex] in the formula units.
1.993 moles are equal to 1.2 x [tex]10^{24}[/tex] formula units / 6.022 x [tex]10^{23}[/tex] formula units/mol.
Hence, 1.2 × [tex]10^{24}[/tex] formula units of [tex]Li_{2} (SO)_{4}[/tex] contain about 1.993 moles.
To learn more about moles visit:
brainly.com/question/26416088
#SPJ9
cobalt(ii) chloride is dissolved in ethanol, and then water is added. what is the co(ii) complex equilibrium reaction? equilibrium reaction:
The equilibrium reaction for the formation of cobalt(II) complex when cobalt(II) chloride is dissolved in ethanol and then water is added is given by the following equation:
CoC₂l + 4 ethanol → Co(C₂H₅OH)₄Cl₂
When the cobalt(II) chloride is dissolved in ethanol, a cobalt(II) complex is formed. The complex is a tetrahedral molecule with four ethanol molecules attached to the cobalt ion. When water is added, it causes the equilibrium reaction to shifting to the right, with more of the cobalt(II) complex being formed. This is because the water molecules can displace the ethanol molecules from the complex, allowing the complex to form. The reaction can be expressed as:
CoC₂H₅OH)₄Cl₂ + 4 H₂O ↔ Co(H₂O)₄Cl₂ + 4 C₂H₅OH
In conclusion, the equilibrium reaction for the formation of cobalt(II) complex when cobalt(II) chloride is dissolved in ethanol and then water is added can be given as:
CoCl₂ + 4 ethanol → Co(C₂H₅OH)₄Cl₂ + 4 H₂O ↔ Co(H₂O)₄Cl₂ + 4 C₂H₅OH.
To know more about cobalt(II) complex, refer here:
https://brainly.com/question/6462267#
#SPJ4
if a sample of a hydrate contains 0.02mol of anhydrous salt and 0.1mol of water, how many water molecules are present in one formula unit of the hydrate (ie. what is z in the formula )?
Answer : There are 5 water molecules per formula unit of the hydrate.
In order to calculate the number of water molecules in a hydrate, we first need to understand what a hydrate is. A hydrate is a compound that contains water molecules bound within its crystal structure. The water molecules are referred to as “water of hydration” and are typically present in a fixed ratio to the other molecules in the compound.
The formula for a hydrate can be written as: AxBy * zH2O, where x and y represent the number of ions in the anhydrous salt and z represents the number of water molecules per formula unit. In order to calculate z, we need to use the information provided in the question. The question tells us that we have 0.02 mol of anhydrous salt and 0.1 mol of water in the sample. we need to divide the number of moles of water by the number of moles of anhydrous salt.
0.1 mol of water / 0.02 mol of anhydrous salt = 5. This means that for every mole of anhydrous salt, there are 5 moles of water. Therefore, the formula for the hydrate can be written as: AxBy * 5H2O. This means that there are 5 water molecules per formula unit of the hydrate. Therefore, z is equal to 5.
Know more about hydrate here:
https://brainly.com/question/11202174
#SPJ11
how many moles of o2 will be released if a liter of blood containing 45 g of hemoglobin is transferred from 60 torr, ph 7.6 to 20 torr, ph 7.2? hemoglobin has a molecular weight of 68,000.
Answer: Approximately 0.00033 moles of oxygen will be released from one liter of blood containing 45 grams of hemoglobin when it is transferred from 60 torr, pH 7.6, to 20 torr, pH 7.2.
First of all, the amount of hemoglobin in the given amount of blood has to be determined using the given data: Amount of hemoglobin in 1 L of blood = 45 g, Hemoglobin's molecular weight is 68,000 g/mol. : Number of moles of hemoglobin = 45/68000 = 0.000662 moles. After that, use the fact that the partial pressure of oxygen is related to the amount of dissolved oxygen, given the oxygen-hemoglobin equilibrium equation.
The formula for dissolved oxygen can be expressed as: Dissolved O2 = PO2 x solubility of O2PO2 = Partial pressure of oxygen in blood = 60 torr (initial) and 20 torr (final). Solubility of oxygen in blood can be determined from the table, which gives solubility as 0.0031 mol/L torr at 37°C.
The calculation of dissolved oxygen under initial and final conditions is as follows:Initial dissolved oxygen = 60 torr × 0.0031 mol/L torr = 0.186 mol/L Final dissolved oxygen = 20 torr × 0.0031 mol/L torr = 0.062 mol/L Thus, the amount of dissolved oxygen that has been released is the difference between the initial and final dissolved oxygen:Amount of dissolved oxygen released = initial dissolved oxygen - final dissolved oxygen= 0.186 - 0.062 = 0.124 mol/L
Amount of oxygen released = number of moles of hemoglobin × 4 × 0.124= 0.000662 × 4 × 0.124= 0.00033 moles
Know more about hemoglobin here:
https://brainly.com/question/15011428
#SPJ11
raising solvent temperature causes solvent-solute collisions to become group of answer choices more frequent and more energetic. less frequent and less energetic. less frequent and more energetic. more frequent and less energetic.
When raising solvent temperature, solvent-solute collisions become more frequent and more energetic.
In chemistry, a solvent is a substance capable of dissolving another substance, usually a solid, liquid, or gas, to produce a homogeneous solution (mixture). The most common solvent is water, although there are other solvents that are widely used in many different industries. In a solvent, a solute is a substance that dissolves. It is usually a solid, but it can also be a liquid or a gas.
When a solute dissolves in a solvent, it forms a homogeneous solution.The solute will dissolve in the solvent when they collide. If the solute is in the solid-state, a solvent-solute collision may only occur if the solute dissolves in the solvent. The rate and frequency of solvent-solute collisions are impacted by a variety of factors, including solvent temperature. When solvent temperature is increased, the kinetic energy of solvent molecules is also increased, resulting in more frequent and energetic collisions.
Learn more about homogeneous solution at:
https://brainly.com/question/3293242
#SPJ11
A mixture of 90. 0grams of ch4 and 10. Ograms of argon has a pressure of 250 torr under the condition of constant temperature and pressure the partial pressure of ch4 is
The partial pressure of CH₄ in the mixture is 239 torr.
We can use the mole fraction of methane (CH4) to calculate its partial pressure in the mixture. First, we need to convert the masses of each component into moles:
moles of CH₄ = 90.0 g / 16.04 g/mol = 5.61 mol
moles of Ar = 10.0 g / 39.95 g/mol = 0.250 mol
Next, we can calculate the total moles of gas in the mixture,
total moles = moles of CH₄ + moles of Ar = 5.61 mol + 0.250 mol = 5.86 mol
Now we can calculate the mole fraction of CH₄,
mole fraction of CH₄ = moles of CH₄ / total moles = 5.61 mol / 5.86 mol = 0.957
Finally, we can use the mole fraction and total pressure to calculate the partial pressure of CH₄,
partial pressure of CH₄ = mole fraction of CH₄ x total pressure = 0.957 x 250 torr = 239 torr
To know more about mixture, here
brainly.com/question/20853110
#SPJ4
onsider a process in which an ideal gas is compressed to one-fourth of its original volume at a constant temperature. calculate the entropy change per mole of gas.
The entropy change per mole of gas is -1.387R.
The entropy change per mole of gas in a process in which an ideal gas is compressed to one-fourth of its original volume at a constant temperature can be calculated as follows:
Let us denote the original volume as V₁, the final volume as V₂, and the number of moles of the gas as n. The entropy change can be calculated using the formula:
ΔS = nR ln (V₂/V₁)
Therefore, the entropy change per mole of gas is given by:
ΔSper mole = R ln (V₂/V₁)
In this case, V₁ = 4V₂ and so,
ΔSper mole = R ln (1/4) = - R ln 4 = -2.303 R log 4 = -1.387R
Thus, the entropy change per mole of gas when an ideal gas is compressed to one-fourth of its original volume at a constant temperature is -1.387R.
To know more about entropy change, refer here:
https://brainly.com/question/4526346#
#SPJ11
If I have 6.00 moles of gas held at a temperature of 93.5 C and in a container with a volume of 41.7 liters, what is the pressure of the gas (ka)?
The pressure of the gas is approximately 4.57 atm or 438.629 kPa
What is the pressure of the gas (ka)?The Ideal gas law or general gas equation states that "the pressure multiplied by volume is equal to moles multiply by the universal gas constant multiply by temperature.
It is expressed as;
PV = nRT
Where P is pressure, V is volume, n is the amount of substance, T is temperature and R is the ideal gas constant ( 0.08206 Latm/molK )
Given that;
P = pressure of the gas (in atm) = ?V = volume of the gas (in L) = 41.7 Ln = number of moles of gas = 6R = the ideal gas constant (0.08206 L.atm/mol.K)T = temperature of the gas (in Kelvin) 93.5°CFirst, we need to convert the temperature to Kelvin:
T (K) = T (Celsius) + 273.15
T (K) = 93.5 + 273.15
T (K) = 366.65 K
Now we can substitute the given values into the formula:
PV = nRT
P = nRT / V
P = ( 6 × 0.08206 × 366.65 ) / 41.7
P = 4.33 atm
Convert to kPa by multiplying the pressure value by 101.3
P = ( 4.33 × 101.3 ) kPa
P = ( 4.33 × 101.3 ) kPa
P = 438.629 kPa
The pressure is approximately 4.57 atm or 438.629 kPa.
Learn more about Ideal Gas Law here: brainly.com/question/4147359
#SPJ1
if the rate constant for a reaction triples when the temperature rises from 25 oc to 65 oc, what is the activation energy of the reaction? give answer in kj/mole.
The activation energy of the reaction, given that the rate constant has tripled when the temperature rose from 25 °C to 65 °C, is 42.6 kJ/mole.
Activation energy is the minimum energy required for a reaction to take place. It is calculated using the Arrhenius equation, which states that the rate constant, k, is proportional to the exponential of negative activation energy (Ea) divided by the gas constant (R) multiplied by the absolute temperature (T).
As the rate constant has tripled when the temperature increased, the activation energy can be calculated as Ea = -R * (1/T2 - 1/T1).
Plugging in the given temperature values of 25 °C and 65 °C and the gas constant, R, the activation energy is 42.6 kJ/mole.
To know more about rate constant click on below link:
https://brainly.com/question/14977272#
#SPJ11
A pie can be cut into eight slices. What is the minimum number of pies you would need if you were to serve a slice of pie with each cup of hot chocolate in item 6? How many slices of pie would be left over?
(a) We would need 7 pies to serve a slice of pie with each cup of hot chocolate.
(b) There would be 6 slices of pie left over.
What is number of pies that will be left over?From item 6, we know that there are 50 cups of hot chocolate to be served.
Since each pie can be cut into 8 slices, we would need to serve 50/8 = 6.25 pies.
Since we cannot serve a fractional pie, we would need to round up to the next whole number of pies, which is 7.
To find out how many slices of pie would be left over, we need to calculate the total number of slices of pie and subtract the number of slices used to serve the hot chocolate.
Total number of slices of pie = 7 pies x 8 slices per pie = 56 slices
Number of slices used to serve the hot chocolate = 50 slices
Therefore, the number of slices of pie left over would be:
56 slices - 50 slices = 6 slices
Learn more about pieces of pie here: https://brainly.com/question/11694372
#SPJ1
Indicate if the following pairs of compounds could be separated via liquid-liquid extraction.First, draw the structures of the compounds, next determine whether they are acids or bases or neutral. Finally, look up their pKa (or pKb) values and indicate which aqueous solution would separate them or if they are inseparable. Assume that you can utilize aqueous HCl, NaOH, or NaHCO3 for your extractions. For each case that will not work, give the reason.You don't have to draw structure, just explain if they are able to be separated or not and with what and why.1. picric acid and phenol2. salicyclic acid and phenol3. triethylamine and diethylamine4. 3-nitrobenzoic acid and 2-nitrobenzoic acid5. benzylamine and aniline
Picric acid and phenol, Salicylic acid and phenol & Benzylamine and aniline can be separated using liquid-liquid extraction but Triethylamine and diethylamine & 3-nitrobenzoic acid and 2-nitrobenzoic acid cannot be separated using liquid-liquid extraction.
1. Picric acid and phenol can be separated using liquid-liquid extraction. Picric acid is a stronger acid (pKa ~0.4) than phenol (pKa ~10). Adding aqueous NaOH will deprotonate picric acid and make it soluble in the aqueous layer, while phenol remains in the organic layer. Then, the two compounds can be separated.
2. Salicylic acid and phenol can also be separated using liquid-liquid extraction. Salicylic acid (pKa ~3) is more acidic than phenol (pKa ~10). Adding aqueous NaHCO3 will deprotonate salicylic acid, making it soluble in the aqueous layer, while phenol remains in the organic layer. The compounds can then be separated.
3. Triethylamine and diethylamine cannot be easily separated via liquid-liquid extraction, as both are bases (pKb values are similar). Aqueous HCl, NaOH, or NaHCO3 will not be effective in separating these compounds. Alternative separation methods, like distillation, may be needed.
4. 3-nitrobenzoic acid and 2-nitrobenzoic acid cannot be separated using liquid-liquid extraction, as they have similar acidity (pKa values are close) and will react similarly with HCl, NaOH, or NaHCO3. Alternative separation methods, like chromatography, should be considered.
5. Benzylamine and aniline can be separated using liquid-liquid extraction. Benzylamine is a weaker base (pKb ~4.2) than aniline (pKb ~9.4). Adding aqueous HCl will protonate aniline, making it soluble in the aqueous layer, while benzylamine remains in the organic layer. The two compounds can then be separated.
To learn more about picric acid; https://brainly.com/question/14866072
#SPJ11