The question is: HELPAAAAAAA A mountain biker moves downhill if he accelerates at 3 m / s2 and takes 15 minutes (900 seconds) down, how far does he travel? HELP ME PLEASE
Answer: The distance travelled by the mountain biker is 2430 km.
Explanation:
Given: Acceleration = [tex]3 m/s^{2}[/tex]
Time = 15 minutes (900 sec)
Displacement = ?
Formula used to calculate the final velocity is as follows.
[tex]v = u + at[/tex]
where,
v = final velocity
u = initial velocity = 0 m/s (here)
t = time
a = acceleration
Substitute the values into above formula as follows.
[tex]v = u + a \times t\\v = 0 + 3 m/s^{2} \times 900 s\\= 2700 m/s[/tex]
The relation between velocity (speed) and distance is as follows.
[tex]Speed = \frac{Distance}{time}\\2700 m/s = \frac{Distance}{900 s}\\Distance = 2430000 m (1 m = 0.001)\\= 2430 km[/tex]
Thus, we can conclude that distance travelled by the mountain biker is 2430 km.
9. Bryce drove his car 10 km from his house to Belle Plaine. It took him 8 minutes. He got stopped at a long
traffic light on the return home and so he took 2 minutes longer on the return trip. What was Bryce's average
speed in km per minute? (3 pt)
Answer:
2 km/minuteExplanation:
Here, we are asked to calculate the average speed in km/minute.
As we know that,
Average speed = Total distance ÷ Total time takenHere,
→ Total distance = 10 km + 10 km
Because, he first drove 10 km from his house to Belle Plaine and then he again came back to his house.→ Total distance = 20 km
→ Total time = 8 minutes + 2 minutes
→ Total time = 10 minutes
Substitute the values in the formula of average speed,
→ Average speed = Total distance ÷ Total time taken
→ Average speed = 20km ÷ 10 minutes
→ Average speed = 2 km per minuteAs an electric current flows through the copper sulfate solution, copper settles on the negative electrode. How will the mass of the copper covering this electrode change if we increase the current by 4 times and halve its flow time?
Answer:
Ține ogaru ca să o lingă pe măta în cur să nu mai facă alt prost ca tine
What is the intensity of sound produced by an elephant's call if it has a power of 0.45 W and you are standing 32.5 m away from the lumbering beast
Answer:
I = 1.36 x 10⁻⁴ W/m²
Explanation:
The intensity of the sound produced by the Elephant can be calculated by using the following formula:
[tex]I = \frac{P}{A} \\\\[/tex]
where,
I = Intensity of sound = ?
P = power of sound = 0.45 W
A = area = πr² = π(32.5 m)² = 3318.3 m²
Therefore,
[tex]I = \frac{0.45\ W}{3318.3\ m^2} \\\\[/tex]
I = 1.36 x 10⁻⁴ W/m²
Two ropes support a load of 478 kg. The two ropes are perpendicular to each other, and the tension in the first rope is 2.2 times that of the second rope. Find the tension in the second rope. The acceleration of gravity is 9.8 m/s 2 . Answer in units of N.
Answer:
T₂ = 1937.68 N
Explanation:
First, we will calculate the weight of the object:
[tex]W = mg = (478\ kg)(9.81\ m/s^2)\\W = 4689.18\ N[/tex]
Now, we will calculate the resultant tension in the ropes. Since the ropes are perpendicular. Therefore,
[tex]T = \sqrt{T_1^2+T_2^2}\\[/tex]
where,
T = Resultant Tension
T₁ = Tension in rope 1
T₂ = Tension in rope 2
According to the given condition tension in the first rope is 2.2 times the tension in the second rope:
T₁ = 2.2 T₂
Therefore
[tex]T = \sqrt{(2.2T_2)^2 + T_2^2}\\\\T = 2.42T_2[/tex]
Now, the weight of the object must be equal to the resultant tension for equilibrium:
[tex]T = W\\2.42T_2 = 4689.18\ N\\\\[/tex]
T₂ = 1937.68 N
The diagram below shows a periodic wave. Which two points on the wave are 180 degrees out of phase?
Please explain as well, thanks so much
Answer:
A and C are 180 deg out of phase (opposite points on a 360 deg wave)
The two points on the periodic wave which are 180 degrees out of phase are point A and Point C.
When two points of wave are out of phase?The two points of a wave is said to be out of phase when they show up or down motion at different times.
If a point on the wave, say (X) is reached to the maximum or minimum point before the other point. Then these two points are said to be out of phase.
Also, when the points are 180 degree apart from each other. Which means if a point is in the crest of the wave and other is on the through.
The diagram below shows a periodic wave. In this diagram,
A and I are the end points of the periodic wave.B,C,D,E,F and G are the other points on the periodic wave.Here, the point A and C are opposite point of each other. So they are 180 degrees out of phase.Hence, the two points on the periodic wave which are 180 degrees out of phase are point A and Point C.
Learn more about the periodic wave here;
https://brainly.com/question/16749356
A skydiver uses a parachute to:
increase air resistance, which increases terminal velocity decrease air resistance, which decreases her mass
increase air resistance, which decreases terminal velocity increase air resistance, which decreases gravitational acceleration
increase air resistance, which decreases gravitational acceleration
A box is being moved with a velocity v by a force p (parallel to v) along a level horizontal floor. The normal force is FN, the kinetic firictional force is fk, and the weight of the box is mg. Decide which forces do positive, zero, or megative work. Provide a reason for each of your answers
Which is not true about the role of gravity in the formation of planets?
Dust and gas particles that were attracted to each other began to rotate into a protoplanetary disk.
Gravity between planetesimals caused them to join together into conglomerate clumps. Our solar system is the only place in the universe where gravity played a key part in the formation of planets.
Gravity of larger objects in orbit around the sun attracted, and cleared the orbital path of, smaller planetesimals, gas, and dust.
Our solar system is the only place in the universe where gravity played a key part in the formation of planets.
This is Flase
The bumper cars crash into each other and stop. Explain why both bumper cars stop after the crash. [4marks]
Answer:
The collision is inelastic
Explanation:
There are two kinds of collision; elastic collision and inelastic collision. In an elastic collision, both momentum and kinetic energy are conserved.
However, in an inelastic collision, kinetic energy is not conserved. So, when the bumper of two cars collide, the cars come to a stop because the collision is inelastic.
will and elephant fall faster than a mouse and why
Answer:
elephant fall faster then a mouse because of the air resistance.
hope it helps.
Explanation:
elephant fall faster than a mouse and because of the air resistance .
hope it is helpful to you
c) Explain the following.
Keftles, cooking pans and iron boxes have polished surfaces
Answer:
Polished surfaces reduce heat loss
1- Three 6-ohms resistors in a series circuit give equivalent resistance of
Answer:
The equivalent resistance of the three resistors is 18 ohms.
Explanation:
The value of three resistors are 6 ohms.
We need to find the equivalent resistance of the resistors. In series combination, the equivalent resistance is given by :
R = R₁ + R₂ + R₃ +.....
Put all the values,
R = 6+6+6
R = 18 ohms
Hence, the equivalent resistance of the three resistors is 18 ohms.
what do you think "you see the world the way you feel" means
A resistor is connected to a 36v power supply. An ammeter measures a current of 2.0 A going through it. Determine the resistance in ohm
R = 18 ohms
Explanation:
Given:
V = 36 volts
I = 2.0 A
R = ?
Use Ohm's law to solve for the resistance:
V = IR
or
R = V/I
= (36 volts)/(2.0 A)
= 18 ohms
Help please please it's due today
Answer:
the right answer is option 2
How many snowmen do you think this sled can destroy? Explain your answer.
Answer:
342,690
Explanation:
I think, given 342,690 snowmen down a giant hill, that sled could destroy every single snowman :)
What information is represented by the slope of a graph of displacement versus time (displacement-time graph)?
how can a sound of a different note be produced in a guitar without changing the length of wire?
Answer:
how tightly strung the wire is
-- Make the string tighter or looser.
-- Keep the same length, but make the string thicker or thinner.
-- Touch the string at a point exactly 1/2, 1/3, 1/4, or 1/5 of its length from one end.
What charge does an object have if it has an excess of electrons?
Answer:
negative charge
Explanation:
On an atomic scale, those are called "ions", and negatively charged ions are called anions.
A regular incandescent bulb is 7% efficient. Which of the following statements best explains this statement?
A.
For every 100 units of electrical energy that enter a light bulb, 7 units are changed into light energy.
B. Every hour that a light bulb is on it uses 7 kW of electric energy.
C. 7 % of the electrical energy that reaches a light bulb is wasted as heat.
D. 7 % of the electrical energy that reaches a light bulb goes right through without being used.
Answer:
Fossil fuels store energy from the sun as
is a
The wire in a simple circuit
which forms an
unbroken pathway, allowing the
electric charges to flow.
A. switch
B. insulator
C. resistor
D. conductor
Answer:
I believe the answer is D: Conductor.
Lithium has an atomic number of 3. How many electrons does it have?
A 4
B. 1
C. 2
D. 3
Answer:
it has 3 electrons. brainliest please
a bicycle process 1000 unit of momentum what would be the bicycles Momentum if its mass is tripled
What is the difference between the spectrum of an incandescent solid and the spectrum of an incandescent gas?
Incandescent solids emit bright-line spectra; incandescent gases emit continuous spectra.
Incandescent solids emit one wavelength; incandescent gases emit several wavelengths.
Incandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.
Incandescent solids emit scattered spectra; incandescent gases emit continuous spectra.
Answer:
ncandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.
Explanation:
Materials when heated emit a continuous spectrum with all wavelengths.
Hot gas gases emit a spectrum that depends on the transitions between atomic states, therefore it is a discrete spectrum.
When reviewing the answers, the correct one is:
ncandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.
Do you think the amount of positive charge on the glass after rubbing it with silk cloth will be equal to the amount of negative charge on the silk? explain.
Two resistors, R 1 and R 2 , are connected in parallel. R 2 =221.0 ohms, and the equivalent resistance of the combination is 120.7 ohms. What is the value of R 1 ? (Unit = ohm)
Answer:
Explanation:
When resistors are connected in parallel combination, then equivalent resistance is given by,
[tex] \to \quad \bf{ \dfrac{1}{R_1} + \dfrac{1}{R_2} =\dfrac{1}{R_p}}[/tex]
Inserting values,
[tex] \to \quad \bf { \dfrac{1}{R_1} + \dfrac{1}{R_2} =\dfrac{1}{R_p} } \\ \\ \to \quad \bf { \dfrac{1}{R_1} + \dfrac{1}{221} =\dfrac{1}{120.7} } \\ \\ \to \quad \bf { \dfrac{221+R_1}{(R_1)(221)} =\dfrac{1}{120.7} } \\ \\ \to \quad \bf { \dfrac{221+R_1}{221R_1} =\dfrac{1}{120.7} } \\ \\ \to \quad \bf { 120.7(221+R_1) = 221R_1(1)} \\ \\ \to \quad \bf { 26674.7 + 120.7R_1= 221R_1} \\ \\ \to \quad \bf { 26674.7= 221R_1- 120.7R_1} \\ \\ \to \quad \bf { 26674.7 = 100.3R_1} \\ \\ \to \quad \bf { \dfrac{26674.7 }{100.3} =R_1} \\ \\ \to \quad\underline{\boxed{ \bf { 265.9 \; \Omega=R_1}}} \\ [/tex]
How does the current in a circuit change if the resistance is doubled? The current is halved. The current is doubled. The current is multiplied by four. The current stays the same.
Answer:
The current is halved
Explanation:
The relationship between the current and the resistance is given by Ohm's Law, as follows:
[tex]V = IR\\I = \frac{V}{R}[/tex]
where,
V = Voltage
I = Current
R = Resistance
Therefore, if we double the resistance:
[tex]I' = \frac{V}{2R}\\\\I' = \frac{1}{2}I[/tex]
Hence the correct option is:
The current is halved
Answer:
A
Explanation:
What process is represented by this redox equation ? 6H 2 O+6CO 2 C 6 H 12 O 6 +6O 2
What process is represented by this redox equation ?
6H 2 O+6CO 2 C 6 H 12 O 6 +6O 2
Answer:-This equation is of the process of photosynthesis. The proper equation is :-
6CO2+6H2O→C6H12O6+6O2.
Determine the mass of fuel required for the expected energy consumption in the United States for the next 10 years:
Provide the energy use per person per year in the United States = 3.5 × 1011 joules.
Base your calculations on a current population of 310,000,000.
Answer:
(This will depend on the type of fuel, I will assume that the fuel is petrol)
First, let's find the expected energy consumption in the US for the next 10 years.
We know that in one year, a person consumes 3.5*10^11 joules.
There are 310,000,00 people on the US
Then the total consumption in one year is:
310,000,000*3.5*10^11 joules = 1.085*10^20 J
In 10 years the consumption is 10 times the consumption of a single year, then the expected energy consumption in the US for the next 10 years is:
10*1.085*10^20 J = 1.085*10^21 J
Now let's find the mass of fuel required.
We know that a liter of petrol has 31,536,000 joules of energy,
And a liter of petrol weights 0.75 kg
To find the number of liters of petrol that we need, we need to find the quotient between the expected energy consumption in the next 10 years and the energy of a single liter of petrol, this is:
N = (1.085*10^20 J)/(31,536,000 j) = 3.44*10^13
We will need 3.44*10^13 liters of petrol.
And the total mass of petrol will be:
M = 3.44*10^13*0.75 kg = 2.58*10^13 kg of fuel.
Un diapasón vibra a 140 [Hz] y la onda emitida por él se propaga con una rapidez de 340 m/s.Considerando lo anterior, se puede afirmar correctamente que la longitud de onda de la onda emitida por el diapasón es
The question is: A tuning fork vibrates at 140 [Hz] and the wave emitted by it propagates with a speed of 340 m / s. Considering the above, it can be correctly stated that the wavelength of the wave emitted by the tuning fork is
Answer: Wavelength of the wave emitted by the tuning fork is 2.43 m.
Explanation:
Given: Frequency = 140 Hz
Speed = 340 m/s
wavelength = ?
Formula used to calculate the wavelength is as follows.
[tex]\lambda = \frac{v}{f}[/tex]
where,
[tex]\lambda[/tex] = wavelength
v = speed
f = frequency
Substitute the values into above formula.
[tex]\lambda = \frac{v}{f}\\= \frac{340 m/s}{140 Hz} (1 Hz = 1 s^{-1})\\= 2.43 m[/tex]
Thus, we can conclude that wavelength of the wave emitted by the tuning fork is 2.43 m.