Balance the equation NH3 + O2 −→ N2 + H2O Given 3.53 mol of the reactant NH3, determine the corresponding amount of O2. Answer in units of mol.

Explanation:

SPD (s-block elements) are the elements located in the leftmost two columns of the periodic table. These elements include the alkali metals (Group 1A) and the alkaline earth metals (Group 2A). These elements are the most reactive of all elements and are characterized by their low ionization energies, high reactivities and relatively large atomic radii. The s-block elements are the only elements to form covalent bonds with other atoms. They also tend to form ionic bonds with other elements and have a tendency to form multiple bonds with each other. Because of their low ionization energies, they are very reactive, which is why they are often used in industrial applications, such as in the production of fertilizers, explosives, and drugs. The s-block elements are also important in the biochemical processes of living organisms. For example, sodium, potassium and calcium ions are essential in the regulation of the nervous system and muscular contraction. Magnesium is also important for energy production and muscle relaxation. In summary, the s-block elements are the most reactive of all the elements and have many important uses in industry and biochemistry. They are characterized by their low ionization energies, high reactivities, and relatively large atomic radii.

Answer:

D

Explanation:

The difference between a reflected and diffracted sound wave is:

A. A reflected sound wave changes direction as it passes through an opening, whereas a diffracted sound wave bounces back to the place of origin.

Reflection occurs when a sound wave hits a surface and bounces back in the opposite direction. When a sound wave is reflected, it changes direction but does not necessarily change its wavelength or frequency. This is why we can hear echoes in a room with reflective surfaces.

Diffraction, on the other hand, occurs when a sound wave passes through an opening or around an obstacle and changes direction. When a sound wave is diffracted, it spreads out and changes its wavelength and frequency. This is why we can hear sound around corners or through a partially open door.

Therefore, option D is the correct answer: A reflected sound wave bounces back to the place of origin, a diffracted sound wave changes direction as it passes through an opening.

A limiting reagent is a chemical reactant that controls the amount of product produced. The limiting reagent provides the lowest product yield estimated from the available reagents (reactants).

No additional product will develop once the limiting reactant has been completely consumed. The theoretical yield of the reaction is the maximum quantity of product that might be created depending on the limiting reactant. The 'percent yield' is calculated by comparing the actual yield to the theoretical yield..

To calculate the "expected yield" of the product, multiply the reaction equivalents for the limiting reagent by the product's stoichiometric factor. This is the estimated number of millimoles. To get the predicted mass of the product, multiply this value by the MW of the product.

Learn more about limiting reagent

https://brainly.com/question/11848702

#SPJ1

The most stable contributor to the resonance hybrid formed when anisole undergoes nitration is structure C.

This is because the negative charge is delocalised to both the oxygen atom and the ring structure of the anisole, which makes the molecule more stable. Anisole directs nitration through resonance, where the delocalised electrons present in the aromatic ring contribute to the electron density around the electrophile at centre and facilitate the electrophilic attack.

Thus, structure C, which has the most delocalised electrons and the most resonance stabilisation, will be the most stable contributor to the resonance hybrid formed when anisole undergoes nitration.

Know more about electrophile here:

https://brainly.com/question/21773561

#SPJ11

The most stable contributor to the resonance hybrid formed when anisole undergoes

nitration

is Structure A, which is

ortho

-substituted.

This is because anisole is a meta-directing compound, meaning that it prefers the intermediate formed when a nitronium ion attacks the

meta

-position of an aromatic ring.

Structure A is

ortho-substituted

, meaning that it is the most likely intermediate formed when anisole undergoes nitration.

Structure A is the most stable intermediate of the three structures, since it is the only one with two equivalent aromatic carbocations in the

resonance

hybrid.

The reason why anisole is meta-directing is because of the electron-withdrawing oxygen atom, which increases the electron density of the ring opposite to it (the

meta

-position).

This increased electron density of the meta-position makes it more likely for a nitronium ion to attack the meta-position, as opposed to the ortho- and para-positions.

to know more about resonance refer here:

https://brainly.com/question/28318319#

#SPJ11

We would require 13.5 moles of AgNO₃ to make 6.75 moles of  Cu(NO₃)₂1

The balanced chemical equation for the reaction between silver nitrate (AgNO₃) and copper (Cu) is:

2AgNO₃ + Cu -> Cu(NO₃)₂ + 2Ag

According to the stoichiometry of the reaction, 2 moles of AgNO₃ react with 1 mole of Cu to produce 1 mole of Cu(NO₃)₂ and 2 moles of Ag. Therefore, if 6.75 moles of Cu(NO₃)₂ are produced, the number of moles of Cu that reacted is also 6.75 moles.

To determine the number of moles of AgNO₃ required, we can use the ratio of moles of Cu to moles of AgNO₃ in the balanced equation. This ratio is 1:2, meaning that for every mole of Cu, 2 moles of AgNO₃ are needed.

Therefore, to produce 6.75 moles of Cu(NO₃)₂, we would need 2 × 6.75 = 13.5 moles of AgNO3.

To learn more about silver nitrate refer to:

brainly.com/question/8071605

#SPJ4

Answer:

Memory foam: NASA developed memory foam to help cushion and support astronauts during space flight. Today, it is used in mattresses, pillows, and other products to provide comfort and support.

Cordless power tools: NASA developed cordless power tools to help astronauts conduct repairs and experiments in space. Today, these tools are widely used in construction, manufacturing, and other industries.

Water filtration systems: NASA developed advanced water filtration systems to help astronauts recycle water in space. These systems are now used in homes and businesses to purify water for drinking and other purposes.

Scratch-resistant lenses: NASA developed a scratch-resistant coating for astronaut helmet visors that is now used on eyeglasses and other lenses.

GPS technology: NASA's Global Positioning System (GPS) technology is used for navigation in cars, airplanes, and boats, as well as for location-based services on smartphones and other devices.

Artificial limbs: NASA developed robotic arms for use in space, which inspired the development of advanced prosthetic limbs for amputees.

Infrared ear thermometers: NASA developed an infrared sensor to measure the temperature of stars and planets, which led to the development of infrared ear thermometers.

Explanation:

Every substance has some physical properties and chemical properties. The new substance is solid and the new substance forms into thin flat sheets can be considered as the inference based on the observations.

A physical property is defined as an any property that is measurable, whose value describes a state of a physical system. The changes in the physical properties of a system can be used to describe the changes between momentary states of the substance. These properties are  referred to as observables. Physical properties are not modal properties.

A chemical property is defined as any of a material's properties that becomes evident during or after a chemical reaction that is, any quality that can be established only by changing a substance's chemical identity.

To learn more about Physical properties of a substance

https://brainly.com/question/26549181

#SPJ4

The calculated value of ∆H will be lower than the actual value due to heat loss. This is because the heat lost to the surroundings is not accounted for in the calculation, resulting in a lower measured temperature change than what would have occurred if no heat was lost.

If there is significant heat loss to the surroundings during a neutralization reaction in an open polystyrene coffee-cup calorimeter, the calculated value of ∆H (enthalpy change) would be lower than the actual value.

The enthalpy change for the reaction is calculated using the following equation: ∆H = q / n

where q is the heat released or absorbed by the reaction, n is the number of moles of the limiting reactant, and ∆H is the enthalpy change per mole of the limiting reactant.

In an open calorimeter, heat can be lost to the surroundings through conduction, convection, and radiation. The extent of heat loss depends on various factors such as the ambient temperature, the specific heat capacity of the surroundings, and the rate of heat transfer.

To minimize heat loss, the experiment should be conducted as quickly as possible, with good stirring to ensure uniform mixing of the reactants, and the calorimeter should be well-insulated to reduce heat loss to the surroundings. If these precautions are not taken, the calculated value of ∆H will be lower than the actual value due to heat loss.

To know more about actual value here

https://brainly.com/question/26893759

#SPJ4

Answer:

which diagram are you talking about?

The answer is

It prevents particles from transferring thermal energy between the outer and inner bottles

Reaction A is the equilibrium between Fe₃+ and SCN- ions to form FeSCN₂+ ions, which results in an orange color solution.

If SCN- is added to the mixture, according to Le Chatelier's principle, the equilibrium will shift to the right to consume the added SCN- ions. This means that more FeSCN₂+ ions will form, resulting in a darker orange color solution, possibly even turning red if enough SCN- is added.

On the other hand, if SCN- is removed from the mixture, the equilibrium will shift to the left to replace the removed SCN- ions. This means that the FeSCN₂+ ions will dissociate to form Fe₃+ and SCN- ions, resulting in a lighter orange or even yellow color solution.

If FeSCN₂+ is added to the mixture, it would not have any significant effect on the color of the solution, as it is already in equilibrium and adding more product (FeSCN₂+ ions) will not shift the equilibrium in any particular direction. Therefore, the color of the solution would remain orange.

To learn more about equilibrium refer to:

brainly.com/question/29359391

#SPJ4

As a result, when the gas is cooled to a temperature below 45 °C, it will condense into a liquid condition. The pressure affects the precise temperature at which the gas will condense.

The slope of the solid-liquid equilibrium line for carbon dioxide is positive; when pressure is increased, the melting point rises.

Three triple points exist (a). (b) In an atmosphere, monoclinic is more stable than rhombic. (c) Sulfur changes state from liquid to vapour and back to liquid when heated from 80°C to 200°PC.

To know more about gas visit:-

https://brainly.com/question/14812509

#SPJ1

To solve this issue, we must use stoichiometry to calculate the relationship between the production of CO2 and the amount of C3H8.

Using its molar mass, we must first determine the moles of C3H8: C3H8 has a molar mass of 44.11 g/mol, which is calculated by multiplying 3 (12.01 g/mol) by 8 (1.01 g/mol). C3H8 moles are equal to 11.89 g / 44.11 g/mol, or 0.27 mol. Next, we apply the balanced chemical equation's C3H8 to CO2 mole ratio: Three molecules of CO2 are produced from one mol of C3H8. the following will be the moles of CO2 produced: The formula for moles of CO2 is: 0.27 mol C3H8 x (3 mol CO2/1 mol C3H8) = 0.81 mol CO2. Finally, we use its molar mass to translate the moles of CO2 into grammes: Molar mass of CO2 equals 12.01 g/mol plus 2 (16.00 g/mol), or 44.01 g/mol. mass of CO2 = 44.01 g/mol x 0.81 mol CO2 to get 35.64 g CO2. As a result, 11.89 g of C3H8 will result in 35.64 g of CO2.

To Know more about C3H8 Visit:

brainly.com/question/8957314

#SPJ1

Answer:

309.1 mL

What is molarity?

The most common way to express solution concentration is molarity (M), which is defined as the amount of solute in moles divided by the volume of solution in litres: M = moles of solute/litres of solution.

To calculate volume required for the solution, we first must find number of moles (n) required. To do this, we can divide mass in grams, by molar mass. Molar mass can be found on a standard IUPAC Periodic Table (International Union of Pure and Applied Science).

n[(NH₄)₂SO₄] = m/MM = 449.4/[(14.01+1.008×4)×2+32.07+16.00×4]

= 3.4006 mol

Now we have moles of solute, as well as molarity, (from the question - 11M) Thus, we can calculate litres of solution.

Volume = moles ÷ molarity = 3.4006 / 11 = 0.309 L = 309.1 mL

Solutions are mixtures that consist of two or more substances that are evenly distributed throughout the mixture.

Solutions are special because all of the substances in the solution are completely dissolved and cannot be seen with the unaided eye. Chemistry 1001 solutions are typically mixtures of solvents and solutes. A solvent is the substance that does the dissolving, and the solute is the substance that is dissolved.

Examples of solvents include water and alcohol, and examples of solutes include salts and sugar.

For more question on  Solutions click on

https://brainly.com/question/25326161

#SPJ11

Answer:

Explanation:

need the equation

Answer:

The formula for barium ion is Ba2+ and the formula for nitride ion is N3-. When combined, they form barium nitride with the formula Ba3N2.

Explanation:

The formula for the barium ion is Ba²⁺, the formula for the nitride ion is N³⁻.

In order to acquire a stable conformation, the metallic element barium from Group 2 of the periodic table readily loses two electrons.

The production of the Ba²⁺ ion, which has a 2+ charge as a result of the elimination of two negative charges, is the result of the loss of these two electrons.

The nitride ion has the formula N³⁻. A nonmetal element belonging to Group 15 of the periodic table is nitrogen.

To finish its valence shell and obtain a stable electron configuration, it can gain three electrons. The N³⁻ ion is created when nitrogen gains three electrons and three more negative charges, giving it a 3-charge.

Thus, the correct answer is Ba²⁺, and N³⁻.

For more details regarding stable configuration, visit:

https://brainly.com/question/24132107

#SPJ6

1.3 Liters of a 0. 352M solution of CaSO4 would contain 62. 1g CaSO₄. So, option C is correct answer.

The solution has a concentration of 0.35M, it means that there ar 0.35M moles of CaSO₄ are there is the solution.

So, we can write is as,

Concentration = Moles/volume in Liters, this can be written as,

Concentration = Mass/Molar mass/volume in Liters

The molar mass of CaSO₄ is given to be 135.14 g/mol and the given mass of the compound is 62.1 grams. Now, putting all values,

0.35 = 62.1/(135.14V)

Volume = 1.35 Liters.

So, the volume of the solution required is found to be 1.35L hence option C is correct.

To know more about concentration, visit,

https://brainly.com/question/17206790

#SPJ4

Answer: 355

Explanation: Given the molecular weights:

M

r

N

a

O

H

=

40

g

m

o

l

M

r

N

a

2

S

O

4

=

142

g

m

o

l

The analogy of the moles will be held constant:

n

N

a

O

H

n

N

a

2

S

O

4

=

2

1

n

N

a

O

H

n

N

a

2

S

O

4

=

2

For each one, substitute:

n

=

m

M

r

Therefore:

n

N

a

O

H

n

N

a

2

S

O

4

=

2

m

N

a

O

H

M

r

N

a

O

H

m

N

a

2

S

O

4

M

r

N

a

2

S

O

4

=

2

200

40

x

142

=

2

200

⋅

142

40

x

=

2

200

⋅

142

=

2

⋅

40

x

x

=

200

⋅

142

2

⋅

40

=

100

⋅

142

40

=

10

⋅

142

4

=

1420

4

=

=

710

2

Given the molecular weights:

M

r

N

a

O

H

=

40

g

m

o

l

M

r

N

a

2

S

O

4

=

142

g

m

o

l

The analogy of the moles will be held constant:

n

N

a

O

H

n

N

a

2

S

O

4

=

2

1

n

N

a

O

H

n

N

a

2

S

O

4

=

2

For each one, substitute:

n

=

m

M

r

Therefore:

n

N

a

O

H

n

N

a

2

S

O

4

=

2

m

N

a

O

H

M

r

N

a

O

H

m

N

a

2

S

O

4

M

r

N

a

2

S

O

4

=

2

200

40

x

142

=

2

200

⋅

142

40

x

=

2

200

⋅

142

=

2

⋅

40

x

x

=

200

⋅

142

2

⋅

40

=

100

⋅

142

40

=

10

⋅

142

4

=

1420

4

=

=

710

2

= 355 GMS

Answer:

Both of the electrodes are dipped in a solution containing copper ions.

Explanation:

Then the copper from the anode gets oxidized and forms copper ions. When copper ions reach the cathode, their reduction occurs and they get converted to pure copper metal and get collected at the cathode.

We may find the size of a typically Regular shaped object by adding those following phases (area of both the bottom of the item and its height).

The volume of the thing is equivalent to the circumference of the bottom (longest times width times height of the object), or L x W x H. In this illustration, the length units we utilised were centimetres. Constant cross - sectional object volume A solid's volume can be calculated by multiplying its length, breadth, and height all at once.

V is equal to l times w. Regular forms feature interior (inner) slopes which are all equal as well as equal sides. Shapes that are irregular include curves and sides of any size and length. Below are a variety of shapes, both regular and infrequent: Pentagon regularly, regularly.

To know more about Regular shaped object click here.

brainly.com/question/28441292

#SPJ4

Answer:

Explanation:

Mercury is a naturally occurring element that can be found in small quantities throughout the Earth's crust. It is typically found in cinnabar deposits, which are rocks or ores that contain high levels of mercury sulfide. These deposits can be found in regions around the world, including Spain, Italy, China, and the United States. Mercury can also be found in small amounts in other minerals and ores, including zinc, gold, and silver. However, due to its toxic nature, mercury is not typically extracted or mined for commercial purposes.

Answer:

so the mass of sulphur dioxide = 0.208334 × 22.4 L = 4.6666816 L = 4666.6816 ml Therefore the volume of sulphur dioxide is 4666.6816 ml .

Explanation:

The amount of solid barium sulfate formed is 1.42g and 7.02 moles of sodium chloride are formed.

When 38.0 mL of 0.160 M barium chloride reacts with 54.0 mL of 0.065 M sodium sulfate, aqueous sodium chloride, and solid barium sulfate form. To determine the number of grams of solid barium sulfate formed, we must first calculate the amount of barium chloride and sodium sulfate used.

The amount of barium chloride used is equal to the product of the molarity and the volume, or 38.0 mL x 0.160 M = 6.08 mmol.

Similarly, the amount of sodium sulfate used is 54.0 mL x 0.065 M = 3.51 mmol.

The reaction between barium chloride and sodium sulfate is an exchange reaction:

BaCl₂(aq) + Na₂SO₄(aq) -> 2NaCl(aq) + BaSO₄(s)

We know that for every mole of barium chloride that is used, one mole of barium sulfate is formed, and for every mole of sodium sulfate used, two moles of sodium chloride are formed.

Therefore, 6.08 mmol of barium sulfate is formed and 7.02 mmol of sodium chloride is formed.

The number of grams of solid barium sulfate formed is equal to the product of the molar mass of barium sulfate and the number of moles of barium sulfate formed.

233.43 g/mol x 6.08 mmol = 1419.25 mg = 1.42g

In conclusion, when 38.0 mL of 0.160 M barium chloride reacts with 54.0 mL of 0.065 M sodium sulfate, 1.42g of solid barium sulfate, and 7.02 mmol of aqueous sodium chloride form.

To know more about barium sulfate, refer here:

https://brainly.com/question/20758434#

#SPJ11

The volume of the container that  that contains 24. 0 grams of N2 gas at 328K at 884 atm is found to be 2.65 Liters.

The ideal gas equation is given as, PV = nRT, where, P is pressure V is volume, n is the moles, R is the gas constant and T is the temperature.

It is given to us that 24 grams of N₂ is to be stored in the container with 884 atm pressure and 328K temperature.

Now, putting all the values in the equation to find the volume of the container,

884V = 24/28(8.34)(328)

V = 2.65 Liters,

So, the volume of the container will be 2.65 Liters.

To know more about the ideal gas equation, visit,

https://brainly.com/question/27870704

#SPJ4

The growth rate of the country's population if it was doubling it's population every 13 years is 5. 38%.

To calculate the growth rate of a population that is doubling every 13 years, we can use the rule of 70, which states that the approximate number of years it takes for a population to double can be calculated by dividing 70 by the annual growth rate.

So if a population is doubling every 13 years, we can find the annual growth rate as follows:

70 / 13 = 5.38

Therefore, the annual growth rate of this population would be approximately 5.38%.

Find out more on growth rate at https://brainly.com/question/29997247

#SPJ1

Considering the ideal gas law, if you have 0.857 moles of gas with a volume of 1.97 L at a pressure of 0.942 atm, the temperature is 26.407 K.

Ideal gas refers to a hypothetical gas composed of molecules that do not attract or repel each other and are approximated by point particles that themselves have no volume.

An ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T), related by the ideal gas law. This law is an equation that relates the three variables if the amount of substance, number of moles n, remains constant and where R is the molar gas constant:

P×V = n×R×T

In this case, you know:

Replacing in the ideal gas law:

0.942 atm× 1.97 L = 0.857 moles× 0.082 (atmL)÷(molK)× T

Solving:

(0.942 atm× 1.97 L)÷ (0.857 moles× 0.082 (atmL)÷(molK))= T

26.407 K= T

Finally, the temperature is 26.407 K.

Learn more about ideal gas law:

https://brainly.com/question/4147359

#SPJ1

Answer:

Crystals of copper sulfate can be obtained from the salt solution through a process called crystallization. The steps involved are:

Prepare a saturated solution of copper sulfate by dissolving the salt in water until no more can dissolve.

Heat the solution to evaporate some of the water, which will increase the concentration of the salt.

Allow the solution to cool slowly. As it cools, the solubility of the salt decreases and it will start to form crystals.

Use a filter or strainer to separate the crystals from the remaining liquid. This process is called filtration.

Wash the crystals with a small amount of cold water to remove any impurities that may be present.

Leave the crystals to dry on a filter paper or in a drying oven.

After following these steps, pure crystals of copper sulfate can be obtained from the salt solution.

Explanation:

A portion of the supernatant liquid was filtered and analysed after the precipitate settled. the ksp is 5.0 ×

[tex] {10}^{ - 4} [/tex]

The balanced chemical equation for the dissolution of AB2 in water is:

AB2 (s) ⇌ A2+ (aq) + 2B- (aq)

The solubility product expression for AB2 is:

Ksp = [A2+][B-]

[A2+] = 0.100 M × 0.5000 L / (0.5000 L + 0.5000 L) = 0.0500 M

[B-] = 0.205 M × 0.5000 L / (0.5000 L + 0.5000 L) = 0.1025 M

[A2+]_ppt = [A2+]_initial - [A2+]_filtered

[A2+]_ppt = 0.0500 M - 2.3 × 10M

[A2+]_ppt = 0.0500 M

[B-]_ppt = 2 × [A2+]_ppt

[B-]_ppt = 2 × 0.0500 M

[B-]_ppt = 0.100 M

Now, we can use these values to calculate the Ksp:

Ksp = [A2+][B-]^2

Ksp = (0.0500 M)(0.100 M)

Ksp = 5.0 ×

[tex] {10}^{ - 4} [/tex]

Therefore, the Ksp of AB2 is 5.0 ×

[tex] {10}^{ - 4} [/tex]

learn more about ksp here:

https://brainly.com/question/4736767

#SPJ4

True, the side chain of an amino acid differentiates one amino acid from another.

Amino acids are the building blocks of protein, which is a macronutrient essential for the growth and repair of body tissues, among other things.

The side chain of an amino acid distinguishes it from other amino acids. Amino acids are organic compounds that have two functional groups: an amino group (-NH2) and a carboxyl group (-COOH). They can be divided into two categories: non-essential amino acids, which are made by the body, and essential amino acids, which must be obtained from food.

Learn more about amino acid: https://brainly.com/question/21327676

#SPJ11

3.75 moles of salt (NaCl) will be created if 750 mL of a 5M solution of hydrochloric acid is used to neutralize too much sodium hydroxide.

HCl + NaOH → NaCl + [tex]H_{2}O[/tex]

According to the question we get

V = 750 mL of a M = 5M solution of HCl are employed. {where V is the volume of the solution in liters and M is the molarity (moles per litre) of the HCl solution.}

So, amount of salt (NaCl) produced in moles

= moles of HCl = M × V

moles of HCl = 5 mol/L × (75/1000) L

moles of HCl = 3.75 moles

Since one mole of HCl yields one mole of sodium chloride, 3.75 moles of sodium chloride will likewise be created.

Although sea salt also contains other chemical salts, sodium chloride, generally known as salt, is an ionic substance with the chemical formula NaCl, which denotes a 1:1 ratio of sodium and chloride ions.

To know more about Salt

https://brainly.com/question/30105881

#SPJ1